EA2700 upgrade from 1.0.14 to the newest 1.1.40

Last year I downgraded my EA2700 to the “non cloud” 1.0.14 version since I didn't “trust” the cloud version. However now it seems safer to upgrade to the new 1.1.40 version than to stay on the old 2012 version. However, I can't get the device to update.
Already tried; 30/30/30 reset, normal reset, factory reset via the web interface but at 98% it keep throwing me a short error message that the upgrade failed (in Dutch).
Should I go via the 1.1.39 version (if yes, were can I find that since Linksys removed the file??) or doed anyone have other options?
Pleased to hear, thanks!

It can help users and others if users manually downloaded the FW from Linksys web site and kept a copy on hand for historical recall if needed. Maybe someone has a old copy on hand some place.

Similar Messages

Useful for an amateur to upgrade from Premiere Pro 7 to the newest version?

Hello,
Is it recommended for a bloody amateur to upgrade?
I have just purchased a Sony 520 with AVCHD.
Is Premiere Pro 7 able to handle this format?
Thanks for all hint.
Regards
Aloha

Bob,
Have you filed a Feature Request for full Canon 5D MKII support with Adobe? That would be a good first step. Also, Adobe is conducting a survey right now, and you can fill in requests for formats that you wish to use. This would be worth the effort, if you have not done so already.
Good luck,
Hunt
BTW I think that it was the AVCHD support that the OP was asking about. Ann gave them the right info to help make the upgrade decision.

I just upgraded my iPad from 4.3.3 to the newest - I think 6.1.3. I cannot find my photos and videos. I tried a restore, but after 3 hours, it's timing out. Pardon my ignorance on asking this question; but is there a way to find my photos?

I just upgraded my iPad from 4.3.3 to the newest - I think 6.1.3. I cannot find my photos and videos. I tried a restore, but after 3 hours, it's timing out. Pardon my ignorance on asking this question; but is there a way to find my photos? I do nto care about anythign else.
Here are the steps I though I took this morning:
Backup iPad
Connect to iTunes and downlaod newest version of iTunes and then newest iOS
restart Vista Laptop
upgrade to newest iOS
I knew somethign was wrong when it took about 6 hours to upgrade the iPad
at the end it errored with this message error (-50), but the upgrade worked
I was expecting to see all my photos but didn't see them
I have tried a restore to a back up 2 times. The first time took 3 hours and just sort of timed out - it kept saying that there was an hour to go
I tried it again 2 hours ago and same message.
They are very valuable to me and so now I am panicking
Your help is much appreciated

Hi Eric Ferguson,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Best of luck,
Mario

How do i upgrade from 6.0.6 to the latest version of iPhoto . I have a mac pro with OS 10.7.5 ?

How do i upgrade from 6.0.6 to the latest version of iPhoto . I have a mac pro with OS 10.7.5 ?

The latest version of iPhoto - 9.5.1 - requires MacOS X 10.9.x. Is it possible to upgrade your Mac to Mavericks? Then you can buy the latest iPhoto from the AppStore.
If your Mac does not support Mavericks, you could upgrade to iPhoto 9.4.3, see: http://support.apple.com/kb/DL1650 , but this version is no longer availbale from the AppStore. Buy a boxed retail version of iPhoto '11 from Amazon or eBay, and then update it from the support page http://support.apple.com/kb/DL1650 .

Can I get a free upgrade from photoshop elements 11 to the 13? I have 11 and my laptop is 64 bit. registered software bought aug 2013

Can I get a free upgrade from photoshop elements 11 to the 13? I have 11 and my laptop is 64 bit. registered software bought aug 2013

There is no free upgrade. You have to buy it.
Mylenium

Is it still possible to upgrade from CS4 to CS6 after the upgrade offer ended in 2012?

Is it still possible to upgrade from CS4 to CS6 after the upgrade offer ended in 2012? I have not found the option to do so.

My family owns and operates a non-franchise entertainment facility (miniature golf, laser tag, arcade, pizza, parties...). I have a design background, so among the many things I do here I'm also able to create marketing materials and an online presence in-house which would be too expensive for us to outsource. Over a five year period, that's given us a software cost of right at $1 per day since our CS3 license ran around $1800. Our customers are the public, and the package we try to push for walk-in traffic costs $50 for four people. In exchange, they get unlimited mini golf, a game of laser tag, and a large pizza. Not a bad deal. If we were to earn $1800 from that group of four every five years, assuming they spent $50 each visit, that'd bring them here close to two times every three months. For our type of business in a city of 118,000 tight-fisted Germans, that's about right.
What, are you trying make me feel GUILTY about being upset that Adobe's new strategy negatively affects my livelihood?
As far as Adobe's policy change announcement goes, I have no idea how it was announced. I DO know I was not sent an email notification, though they have my email address and record that I'm a CS3 owner. Presumably it was announced somewhere on Adobe's website, and further disseminated through various digital and print trade publications. I respect Adobe's right to not reverse its decision. If our business decided to put a sign on the front doors (since we don't have contact info for all of our past customers) saying we'd closed that night at 5 PM instead of 11 PM as usual, we aren't obligated to let in latecomers. But I'd also recognize their right to be mad at us for wasting their travel time. What I WOULDN'T do is tell them it's THEIR fault for not being proactive and calling ahead to confirm the expectation that our hours are still the same as they've been for the last decade. NOR would I be surprised if we didn't get their $50 that month. These Germans tend to hold grudges.

I had an iPod Classic 5th Gen that I upgraded from 30gb to 80gb. The problem I'm having is that it will not more than about 5.4gb worth of songs. The iPod begins to freeze mid sync and the (-69) error message haults the sync.

I had an iPod Classic 5th Gen that I upgraded from 30gb to 80gb. The problem I'm having is that it will not sync more than about 5.4gb worth of songs. The iPod begins to freeze mid sync and the (-69) error message haults the sync process. The hard drive has been upgraded, it has a new logicboard (with 128mb RAM), new housing, battery, hold / headphone jack. Basically the only original parts are the bezel, click wheel, screen, and data ribbons. Have attempted the 3Rs and have also tried to isolate potentially corrupt audio files and remove them, but this did not seem to be the primary cause. The sync failure consistently happens at just under a 1000 songs (5.4gb) and then it starts to error (-69) any song after that. Your advise would be enthusiastically received.

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

HT3819 how can i transfer music from an old nano to the newest nano

how can I transfer music from an old nano to the newest nano

If the music was purchased from the iTunes Store, simply sign into your iTunes Store account on iTunes. From there, go to the main page of the store. Then, on the right, there should be a purchased button. Tap there, and walla! You can download all of your past purchases. If it wasn't from the iTunes Store, use a third party Mac app.

I upgraded from a 1st generation to the 4th generation Time capsule Model A1409. Since then I am getting interference on my wireless transmitter that sends signals from my Pay TV box to another TV downstairs. Is it the dual frequency and how do I stop i

I upgraded from a 1st generation to a 4th generation time capsule (model A4109) and since then my pay TV wireless transmitter has pulsating interference. This is obviously due to the new dual band frequency of the TC. Is there any way I can set it to one band and what will that do?

Go in and manually set the wireless channel for 2.4ghz or 5ghz (whichever your av sender is).. try different channels.

Upgrading from CS6 to CC causes the extention .prproj to become corrupted.

After upgrading from CS6 to CC, by installing CC then uninstalling CS6: In Windows 7 "prproj" became associated (i.e., "open with") with Acrobat (?) and will not re-associate with Premiere CC. Using the windows procedure to change the "OPEN WITH" target yields no effect whatsoever --nothing gets changed and it Acrobat still tries to open it. If I had to guess, this appears to be a registry-writing bug wherein one of the versions somehow corrupted the registry, rendering it useless to Premiere CC.
Premiere crashes often enough (at least once every day or so) to make it necessary to go into the backups and retrieve the last auto save. It is harder to do this without a working link.
I already have the latest CC installed so the questions are: Is this a known bug? Is there a workaround??
Thanks.

Some more information:
Premiere does not appear on the default "Open with" list for .prproj --only Acrobat Pro (which is not a CC install if that makes any difference). Choosing another application via browse is ignored.
In order to rule out actual Windows as the problem, I tested, and was successfully able to re-associate other extensions (to other applications) using "Open with". The only extension not responding is .prproj. This suggests either a premiere problem in specific, or an Adobe problem in general since the association for .prproj is stuck on Acrobat.

I have upgraded from 4 to 5s inserted the sim and followed the on screen instrutionsBUT i have no service can you help please?

I have upgraded iphone from 4 to 5s inserted the sim followed the screen instructions BUT I have no service can you help?

The iPhone 4 and iPhone 5s use different sized sims. So you can't simply have inserted the 4's sim into the 5s.
If you got a new sim, was that sim activated without your carrier?
You need to contact your carrier if you wish to have your service on the 4 transferred to a sim that the 5s can use.

I want to upgrade from CS3. What is the highest contribute I can upgrade to. Also, I want to inst

I want to upgrade from Contribute CS3. What is the highest system I can upgrade to? I need to install on 2 computers; one is Windows and the other is MAC. Can I do this?
Thanks
Danny

Contribute 6.5 is the current version and Adobe only sells current versions.
Unfortunately Contribute CS3 is too old to qualify for an upgrade. Only CS4 and newer qualify.
http://www.adobe.com/products/contribute/buying-guide.html
You'll either have to pay full price for CS6.5 or find another software solution.

Upgrading from Gen 1 router to the I424WR GigE router?

Hey guys,
I was wondering if someone could help me in my little situation.
I recently upgraded to the 50/25 FiOS internet but I have the old Generation 1 router. So my wifi speed and range isn't all that great throughout our house.
My buddy has a spare I424WR GigE router (which i believe is the newest one that supports "N" wireless)
Question is. If i buy the router from him and want to use it at home. Can i just disconnect the router that I have now and connect the power cable and coax to get internet connection or do i need to do something else?
Thanks

walt178 wrote:
MCZFilms wrote:
So i just need the actual power cable for the new router and then I can just hook it up via coax to get basically faster speeds and longer range right?
Not quite. The default mode for that router (at least the ones I've seen) is Compatibility Mode (802.11 b/g/n). With compatibility mode you will not get full "n" speed. You need to go into your router's wireless settings and change it to : Performance Mode (802.11n).
If you have any "g" devices on your network, they will not work once you go to Performance Mode. If you have "g" devices and want to take advantage of "n" capability, you will need to follow viafax999's suggestion of bridge mode.
Alright, so as long as I replace my old one with the new router i'll get better speeds correct? Cause i'm thinking of just replacing my old router with the new one (The router with the red line on it dual band) I may get an extender in the future (Airport Express/Extreme to get extra range)
Now to be safe I'll probably be in Compatibility mode.. Cause here's wha devicest we have in our house.
2 MacBook Pro's 2009 and 2011
1 Windows 8 Dell Desktop 2012
All iPhone 5's or newer and a Galaxy Note 2.
As long as we get better speed than 20mb/s then that's fine. Cause YouTube is lagging and browsing online sometimes is just a huge lag.

Upgrading my 10.3.9 to the newest.

i want to upgrade my imac 10.3.9 to the newest version, the leopard disc came with my new macbook, can i use it? i tried, and it says it cant be loaded on this computer? do i have to download each upgrade one by one till i get to the newest? i want leopard on all my computers! i love it

Welcome To  Discussions Ponyboy4130!
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
And here are the Leopard System Requirements.
ali b

How can i import bookmars history cookies etc. from my Opera brower to the newest version of Mozilla Firefox?

I was useing Opera - got dull with it, now i want to use Mozilla Firefox, but i cannot import anything from my old browser. While i was installing the new browser it asked me if i want to import any bookmarks history passwords etc. from any other browsers and the only option was Microsoft Internet Explorer, there was no option where i could choose Opera.....

If Firefox doesn't offer to import the Opera bookmarks then export the bookmarks in Opera to an HTML file and import that file in Firefox.
See also:
*http://kb.mozillazine.org/Import_bookmarks
*http://www.linkagogo.com/go/Convert?informat=opera&outformat=netscape

EA2700 upgrade from 1.0.14 to the newest 1.1.40

Similar Messages

Maybe you are looking for