Each batch of IDocs must create one file.

Hi Experts,
I am new to the PI. I am using PI 7.1. I am doing one scenario which is IDOC to file using FCC. I have devloped this interface. In Target side each idoc creats a unique file.
But my output file should be, Each batch of IDocs that PI processes must create one file. with date and time as part of the filename.
Could you please help me how to crete a file like this.
Thanks in well adwance.
Regards
Balu

Thanks your replies. I am sorry to say this, The exact client requirement is:
I have an Idoc to file scenario. Target side I am using FCC. The issue is only on file name which is creats by PI on target system The file name should have name along with only date. The output file name should be same with date. All coming files should be appended in that file itself. For making an history, each day I should maintain one file (Name along with date), Coming all files should append in that file itself. I will have one file per day. If it already exists, it will be appended to. Please help me on this
Thanks in Well adwance.
Balagi

Similar Messages

Creating one file per each 50 Mb of data received from PI

Hi Experts,
I have a scenario JMS to FIle.I have to create separate files for each maximum of 50MB received by SAP PI.
For example if PI receive 160 MB data then i have to create 4 files i.e 1st file with 50 MB file data ,2nd file with 50 MB file data ,3rd file with 50 MB file data and 4th file with 10 MB file data. How to acheive this any suggestion.
Regards
Deepak

Hi Deepak,
Following logic can be applied if and only if the data that you are receiving from JMS is binary one(not a structured). In that case, you can break your large binary data file into small small packets of any size.
In SAP PI 7.30/7.31 this fuctionality is available in the File sender and receiver channel. You can directly use it if you are working on the PI 7.30/7.31.
If you are not using 7.30/7.31 then you need to write a adapter module which does same functionality. Logic is simple:
Step 1: Get the XI message payload and convert it into binaryStream object.
Step2: find the length of binaryStream and then calculate the no.of packets that you want to create by dividing binaryStream size with packet's size that you want. eg. if main payload size is 160 MB and packet's size is 50 MB and no.of packets = 160/50 =3.2 round off to 3.
Step 3: Divide the large file size 4 times with given packet size and put remaining data into last packet.
Step5: change all the small binaryStream packet into Files and store them into target directory.
Best Regards,
RK

How do I save all tracks as one and create one file/mp3?

I have logic pro 8 and I am a rapper. I created a song, which is about 6 tracks long. Now that I have finished the song, I want to save the COMPLETE product as one file, a file type that can be played in Itunes. When I try to save it, it only saves each track as an individual file.
Can someone help me?

You have to BOUNCE the finished product. If you look at page 601 of the user guide, it explains it there in detail. You can output the file in several formats, including MP3.
Peter

BPM: Multiple IDOC collect into one file

Hi
I have done collecting multiple IDOCs of same type into one file using BPM
I have used the following blog which is collecting different types of IDOCs.
IDOCs (Multiple Types) Collection in BPM
But i have done collecting of IDOCs which are same type.
Source side it is showing successful and its reaching to BPM also . But in target i am not getting any file. Could any one please help me how to check where exactly I am failing.
Thanks & Regards
Sowmya

Check whether the Outbound Status is successful or not in sxm_moni. Is there any message created from Integration Process to receiver File system.
Check this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80a22ce8-8e72-2b10-3fba-e9511c6f0b8b
Regards,
Prateek

SEPA file – how to create one file for multiple company codes

Dear experts,
My company has multiple company codes and they process automatic payments (F110) for multiple company codes in the same run.
The company wants to generate one SEPA file for all company codes.
In OBPM1 for SEPA format in the section ``Payment medium output devided by level of detail`` I unchecked everything (attached).
OBPM4 for SEPA format is showing `` No separation of payment medium output``.
Unfortunately, when I run automatic payments (F110) for multiple codes, multiple files for each company code are created.
Can anyone let me know how it is possible to create one SEPA file that will contain payments for multiple company codes?
Thank you

Hi Zara,
Please check in transaction DMEE your format tree (eg. SEPA_CT), 'DMEE tree: properties' - tab 'Sort/key field'. Is the Sort/key field 'ZBUKR' defined there with Level 1?
Please follow the recommendation of note http://service.sap.com/sap/support/notes/1742584
Regards,
Emöke

Custom IDOC to create XML file

Hi,
We are on 4.7 release.
A custom outbound IDOC type is developed to creates a text file at the location entered in FILE type port.
Now we want to create XML file intead of text file. Is it possible by simply changing the port to XML FILE port? Or do we need to do any modifications inside the FMs for the IDOC?
Similarly for Inbound scenario (using custom IDOC type), do we need any chagnes in FMs to handle IDOCS in XML file format?
Thanks.

You can even do that conversion of idoc to xml by simple method
create a xml port and use the standard fm there
and it wud handle that.
u may like to refer this blog...
Collecting IDocs without using BPM
Thanks
Kiran
Edited by: kiran dasari on Dec 12, 2008 10:38 AM

How to create one file to 2 output files with a condition?

hello friends,
i have a scenario to split one file into two different files using a condition.
based on the account number ( 100's of accounts) i have to split the file into two. ex: acc# 1, acc#2, acc#3 goes into one file rest of the account number records goes into another file how to build the logic.
thanks
sri

Hi Sri,
One way-
You can achieve this with the help of Java Mapping..
In the Java Mapping, read input, parse the input while parsing the document , group the data into 2 structures and in the Interface Mapping use this java mapping. So here you have 2 target message interfaces..
Hope this helps,
Regards,
Moorthy

IDocs not created in file to IDoc scenario

Hi all
I am trying this file to IDoc scenario.
File picked up successfully and sent to R/3 BackendBut Idoc is not postedthe status records
In /n we05 in R/3 Backend shows that EDI: Partner profile inbound not available
I created/tested all basics like RFC dest, port etc.
File service that I am using is a business service hence I am specifying a Logical system name in
Adapter specific Identifiers of the file service.
I disabled EDI_DC40 control tag record as IDoc adapter
takes care of it.
So at first I tried the configuration of IDoc comm. Channel by checking the Apply control record values from payload
But SXMB monitor gave an error regarding this control record tagI guess as we have disabled it so there wont be any values
for control record in payload (correct me if I am wrong).
So I unchecked the checkbox Apply control record values from payload and monitor showed up as successfully processed.
But in the backend I am getting this error regarding partner profile.
I also tried to use an existing profile (LS type) by modifying its inbound parameters to accept CREMAS Idoc.
But the error is as persistent as me
Pls help
Sudhir

Hi
Sender --> LEGACY, maintained in SLD (Logical system).
Receiver--> ENI maintained in SLD with logical sys name M700.
Partner Profile LEGACY maintained in R3.
Following is the IDocOutbound in SXMB monitor in XI.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:IDocOutbound xmlns:SAP="http://sap.com/xi/XI/Message/30">
<SAP:TABNAM>EDI_DC40</SAP:TABNAM>
<SAP:MANDT>100</SAP:MANDT>
<SAP:DOCREL>640</SAP:DOCREL>
<SAP:DOCNUM>0000000000001013</SAP:DOCNUM>
<SAP:DIRECT>2</SAP:DIRECT>
<SAP:IDOCTYP>CREMAS03</SAP:IDOCTYP>
<SAP:CIMTYP />
<SAP:MESTYP>CREMAS</SAP:MESTYP>
<SAP:MESCOD />
<SAP:MESFCT />
<SAP:SNDPOR>SAPAXI</SAP:SNDPOR>
<SAP:SNDPRN>LEGACY</SAP:SNDPRN>
<SAP:SNDPRT>LS</SAP:SNDPRT>
<SAP:SNDPFC />
<SAP:RCVPOR>SAPENI</SAP:RCVPOR>
<SAP:RCVPRN>M700</SAP:RCVPRN>
<SAP:RCVPRT>LS</SAP:RCVPRT>
<SAP:RCVPFC />
<SAP:TEST />
<SAP:SERIAL />
<SAP:EXPRSS />
<SAP:STD />
<SAP:STDVRS />
<SAP:STATUS />
<SAP:OUTMOD />
<SAP:SNDSAD />
<SAP:SNDLAD />
<SAP:RCVSAD />
<SAP:RCVLAD />
<SAP:STDMES />
<SAP:REFINT />
<SAP:REFGRP />
<SAP:REFMES />
<SAP:CREDAT>0000-00-00</SAP:CREDAT>
<SAP:CRETIM>00:00:00</SAP:CRETIM>
<SAP:ARCKEY>DF57A2C0532811D9AD84000F206A031B</SAP:ARCKEY>
</SAP:IDocOutbound>
Control record of IDoc in R3
Tab: Typeinfo
 Basic type-->CREMAS03
 Message Type-->CREMAS
Tab: Partner
 Recipient
 Port -->SAPENI
 Partner Number--> M700
 Partner Type-->LS
 Sender
 Port -->SAPAXI
 Partner Number--> LEGACY
 Partner Type-->LS
Pls help
Regards
Sudhir

Collection of multiple IDOCS in one file to send once a day

Hello,
There are number of documents created for a vendor and we need to send the IDOCs for all the orders in one file collectively. The transfer should happen at the end of day.
Currently we are using correspondance mechanism for it, but it creates one file for each idoc.
Is there any standard solution to combine the IDOCS ?
Thanks and rgds,
Anand

Hello Anand
I have used the approach described in [SAP Network Blog: Collecting IDocs without using BPM|Collecting IDocs without using BPM] to collect IDocs.
Regards
Uwe

Streaming videos in multiple-bitrates without manually creating video files in each b

I want to have a media file that I can stream at multiple bitrates using FFMPEG (for encoding and multiple bitrate generation) and Flash Media Server (for streaming).
In "LIVE BROADCASTING" ffmpeg made multiple bitrate videos from a single bitrate source but there were no files for the different bitrates. A file would be created for different bitrates when a viewer requested that bitrate streaming video but when a request was terminated the generated file was deleted.
So I searched in Flash Media Server and found (hds-vod), but in hds-vod I should create one file for every bitrate, for example if I have 2000 videos in my archive with HD quality (1024 kbps) I should make 4 videos with different bitrates from one video and together I have created 10,000 videos.
So to have 2000 videos in five bitrates (1024k, 760k, 320k, 145k, 64k), and now I have 10,000 videos. I have space for 2000 videos and I don't have free space in my server for 10,000 video files.
I want to stream "ON-DEMAND" videos in my server and not have the different bitrate files be continually generated like this.
Does anyone have any advice?
Thank you

Unfortunately, you cannot organize the videos on your iPod Touch differently than the way they do it. That *****, I know. Hopefully this will change with 2.0.
Hope that was helpful.
-Messymeese

HP Officejet 6500A How do I scan a document with multiple pages into one file?

HP Officejet 6500A Plus e-All-in-One Printer - E710n
Windows 7 (64 bit)
How do I scan a document with multiple pages into one file? My old printer (psc 2110) asked after each scan if I wanted to scan another page. At the end I had one pdf file with multiple pages.
This new one creates one file for each page and I cannot find a way to create one pdf file with multiple pages.
This question was solved.
View Solution.

Hi mpw101,
If you load the papers into the ADF - Automatic Document Feeder, and then select Document to PDF then they will all be scanning into one file. Let me know if this works for you?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Creating pdf files from excel workbook

I'm trying to convert an excel file to pdf. It contains 10 sheets and when viewing the entire workbook the total number of pages should be 15 pages. If I send it to print in adobe pdf. It starts creating different files for different sheets sometimes it puts together 3 or more sheets but sometimes it creates one file for one sheet. For this particular document ir creates 8 files. Later on if I put the 8 files together the pagination is correct. Can this be done in one step? Maybe I'm not aware of a file break feature. If I try to use the pdf maker it tells me that it can't create tags because there is a set print area or because I'm using print titles so I have to create the pdf by selecting print and select pdf as printer to be able to create it. Is there an easier way to create one file with the 15 pages at once?

I was having the same problem. I saw this and when I attempt to open that forum, it doesn't take me to that page. It takes me to the generic forums page (http://forums.adobe.com/index.jspa). I'd love to solve this problem as it drives me nuts.
Can anyone provide either an updated link or the instructions themselves?
Thanks!

It is necessary to create one header data for each file to be sent to CDFS.

hi GUYS
my sce anrio is FILE-XI-PROXY
REQUIREMENT IS
SOURCE FILE                      TARGET FILE WILL BE
H1                                             H1                        H1                    H1
I1                                               I1                         I2                      I3
I2                                                F1                        F1                    F1
I3
F1
It is necessary to create one header data for each file to be sent to TARGET. Each file will be related to only one SAP Company Code.
Thanks
NAG

aa

One file for multiple IDOCs

Hi,
Need help on IDOC files created on application server.
For IDOCs of EDI type generally one file is created on application server for one idoc. Is there any way to create a common file for multiple IDOCs that are created in a batch job?
Thanking in anticipation
Sudhir Bhate

Hi Sudhir;
Yes, it is a setting on the outbound parameters of the partner profile. In the section for "output mode," select "Collect IDocs." This link to help.sap.com describes the procedure:
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b812a43d711d1893e0000e8323c4f/content.htm
Cheers,
John

How do i create one source file that feeds two users on the same pro book?

how do i create one source file/folder of photos that feeds two users on the same pro book?

Well you can do exactly the same with a folder of photos, just put in the Users/Shared folder.
Iphoto is a mite more complex than this. It's a database and so there's a bit more involved.
For iPhoto 09 (version 8.0.2) and later:
What you mean by 'share'.
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
Remember iPhoto must be running in both accounts for this to work.
If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc.
Quit iPhoto in both accounts. Move the Library to the Users / Shared Folder
(You can also use an external HD set to ignore permissions, a Disk Image or even partition your Hard Disk.)
In each account in turn: Double click on the Library to open it. (You may be asked to repair the Library Permissions.) From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.

Each batch of IDocs must create one file.

Similar Messages

Maybe you are looking for