Easiest way to transfer files larger than 4gb between mac and windows?

I just borrowed a windows laptop and formatted an external USB drive FAT32 and am able to transfer files from my Tiger OS Mac and the Windows 7 computer..but now I discover the maximum file size is 4GB. How could I transfer files (usually video) larger than that? Thanks for any help.

Set up a network and file sharing, or format the drive to Mac OS Extended and install the MacDrive trial on the PC, or format the drive to NTFS and install the NTFS-3G drivers on the Mac.
(56283)

Similar Messages

  • 1 hd with 2 file formats for use between mac and windows?

    Think this is the right forum...
    I want to instal a program onto an external hard drive for use on both mac and windows. The program supports both mac and windows.
    My plan is to get an external hd and partition it in half. One half i will format mac os extended and the other i will format ntfs. I'll instal the mac version on the mac partition and the windows version on the ntfs partition.
    This should work i'm thinking, yes? I.e. when i plug it into windows it'll run the windows installation no problem and when i plug it into the mac it'll run the mac installation no problem?
    Thanks.

    An easier solution might be to just connect the drive to a Windows PC and format it as FAT32. Both Windows (98 and higher) as well as Mac allow full read/write access to FAT32 formatted drives. No need to download any drivers, etc. It just works.
    Yes, this solution is not perfect, but none are. The free NTFS drivers for Mac are not most efficient drivers for speed/performance, the HFS+ drivers for Windows are not cheap, and have their own performance issues, and FAT32 has the limit of file sizes over 2GB (or is it 4GB now?) not supported. No one solution is perfect, but for the many one is better than the others, but it all depends upon their circumstances which is "better".

  • Im new to Mac and wanted to know what is the easiest way to transfer files from a mac computer and mac extenal hardrive to windowns and vice versa?

    Im new to Mac and wanted to know what is the easiest way to transfer files from a mac computer and mac extenal hardrive to windowns and vice versa?

    For small amount of files, a regular USB stick or drive, it's already formatted with a MBR and FAT32 most likely which works both on PC's and Mac's.
    External drives if you need more space.
    However FAT (or Fat32 or MSDOS) has a 4GB file size limit. So if your transfering files bigger than that then you need to format it exFAT on the Windows machine.
    Vista and Win 7 can do this, Windows XP one can download a free exFAT upgrade from Microsoft.
    Mac's can read/write the MBR and FAT/exFAT (10.6.5 and later) formats, it's best to format it on the Windows machine, even though the Mac can format it too, it's better to do it on Windows then take it to the Mac to confirm.
    Rack your brain here on it.
    https://discussions.apple.com/message/16317478#16317478

  • File transfer between Mac and Windows

    I am running Windows on my Mac and I transfer files between mac and Windows alot using my external hard drive. I was wondering if there was an easier way to do this than having to use my external hard drive like a networking solution or something. Thanks...

    i also run windows on my mac (for work). The issue i had was that when booted in osx, i could see the windows partition, and copy files FROM it to the mac side, but i could not copy files TO the windows partition.
    As i understand it, this is because the apple NTFS driver (to read the windows partition) only allows read access (not read and write access). It was easily solved with MacFuse (which is an open source way to add different disk file systems to your mac, kind of like teaching it a new language), and NTFS-3G for mac osx.
    http://macntfs-3g.blogspot.com/
    scroll down a bit for the download link. The installer will put in MacFuse and NTFS-3G, so it's the only one you need.
    After a reboot, i can read/write to the windows partition while booted into macosx (and it's free).
    i hope that helps.
    p.s. the efi boot manager download is NOT required.

  • Share files between Mac and Windows in same iMac with boot camp

    Hello,
    I am new in using Mac and recently I buy a IMac 24" model.
    I used to use PC a long time with a lot of old document.
    I want to install Windows XP with boot camp.
    But I also want to share my documents, music, video files between Mac and Windows in same iMac.
    How can I do this?
    Thanks in advance,
    Eric

    Hi Eric and welcome to Discussions and the Apple world.
    Mac OSX can read and write from Windows partitions (like the BootCamp Windows partition you are about to create) when using FAT32 as file system for Windows.
    However with FAT32 you are limited to a partition size of 32GB.
    Mac OSX can also read from Windows partitions that uses the NTFS file system, but it can not write to them unless you use a third-party helper like either Paragons NTFS for Mac http://www.paragon-software.com/home/ntfs-mac/ or NTFS-3G http://www.ntfs-3g.org/
    Windows can not even see or use a Mac OSX partition without additional help by MacDrive http://www.mediafour.com/products/macdrive/
    Regards
    Stefan

  • What is the easiest way to transfer a large imovie project from one computer to another in a different location.

    What is the easiest way to transfer an faairly large HD imovie project from one computer to another in a different location. Can you export to drop box? Will the other computer need the exact imovie version?

    OK it depends.
    If you have a finished movie, you can SHARE/EXPORT MOVIE and create your final movie. Then, depending on the size of the finished movie, you can transfer via dropbox or similar service. Ninety minutes is a very long movie for iMovie, but it may work for you. I would suggest 720P to keep the size down.
    If you need to transfer the entire iMovie Project so it can be edited in iMovie at the other end, then you need to transfer the project and event assets to an external hard drive and get the hard drive to the other location.
    Directions are here. Follow the directions for 1) Moving or copying Project to external drive. Then 2) Consolidate Media.
    https://discussions.apple.com/docs/DOC-4141

  • What's the easiest way to transfer files to new mac?

    My first mac was a Macbook (purchased in August 2010) and I'm upgrading to the new 13" Macbook Pro with retina display. What is the easiest way to:
    1) transfer files to the new laptop
    2) delete files off my old macbook to share with a family member--possibly thinking of return to factory settings.
    I have a 1TB external hard drive and I use the cloud on all of my devices (also have iPhone and iPad synched to the cloud).

    Welcome to Apple Support Communities
    1. The best way to transfer files from another computer is by using Migration Assistant > http://pondini.org/OSX/SetupLion.html Your new MacBook Pro will ask you to restore from another computer during its initial setup.
    2. If you haven't got a lot of apps you installed, you can just create a new user and delete the old one, so you won't have to reinstall Mac OS X.
    To do it, open System Preferences > Users and Groups (or Accounts), press the + button and create an admin user. Then, log in this user, go to System Preferences > Users & Groups, and remove the old account

  • Sharing files between mac and windows

    Hello, I have recently purchased a new mac computer and I would like to transfer files from my old windows computer onto this new one and vice versa. I have tried using an external hard drive to do this, but I found that it can only be formatted to one OS at one time. Does anybody have any ideas of how I can accomplish this? Thank you so much for your help everyone!

    I'm not clear as to the current format of the drive. Since you say it is working with MacDrive I am assuming it is currently NTFS. You also say this is for a "new computer" so is this really a Leopard OS computer, making this a Leopard OS question? There's differences in the capabilities of the different systems.
    As for MacDrive, if it works and it's the only program then you'll have to pay for it. I'd say if you're just using it this once for this one application you could probably buy a used drive for $50 to allow you to clear some files off the one you want to use and reformat it. Drives formatted to FAT32 can hold files up to 4GB in size and work with both Mac and Windows. Unless this is for video I don't see a severe restriction to reformatting to FAT32 and using that.

  • How to use an external hard drive and copy files to the disk for mac and windows??

    please tell me how to copy files to external hard disk and use it for both mac and windows. there is the fat32 formatting bt i dont wanna use formatting because i already have a lot of content on the exteral hard disk. thank you.

    It is simplest to have the HDD formatted to noe common to both Mac an PC.  ExFAT is one.  But to do that will erase all data on the HDD.
    If the HDD id formatted NTFS, Mac can read but not write to it.  The solution then is to use a third party application such as Paragon or Tuxera which will overcome that obstacle.  These applications do have mixed reviews.
    Ciao.

  • Easiest way to transfer files between two PCs?

    There's a lot of stuff I'd like to transfer from my desktop to my laptop, but unfortunately sneakernet is out, as my pen drive is too small and the desktop can't burn CDs. However, the machines are currently on the same 100 Mbps LAN, and I've got a couple yards of USB cable if that proves necessary.
    What I'd like to know is: what's the fastest and easiest way of transferring the files? Should I use SSH? Should I create an NFS volume and put everything on that?

    Don't tell me you've never even tried using samba?!
    Easy as pie, if you go with "security = share" insetead of "security = user". Less secure of course.
    Look at this samba stanza (my misc share...);
    [misc]
    comment = read and write
    path = /home/pelle/share
    public = yes
    writable = yes
    force group = users
    force user = pelle
    complicated!? I think not.
    [edit]you would of course have to mount this in the client fstab like this;
    //xxx.xxx.xxx.xxx/misc /mnt/whatever cifs guest,ro
    (or just use the kio/gnome-vfs smb:/xxx.xxx.xxx.xxx)[/edit]
    Last edited by pelle.k (2007-06-03 15:33:44)

  • Easiest way to transfer files from Mac to Mac?

    I have an external HD, but having some problems!
    Is there any other ways, easier ways?
    Connect them via a router?

    It depends on what kind of data.
    Document files alone you can transfer via any medium, as long as the applications which open the same documents are compatible with both Macs.
    Applications are limited to the license agreement enforcement of the said application. Some are limited to scattered preference or font files.
    Moving operating system level data between PowerPC and Intel Macs, see this tip:
    http://discussions.apple.com/thread.jspa?threadID=435350&tstart=0
    Moving between Intel and Intel Mac, or PowerPC and PowerPC Mac, the Migration or Setup Assistant can help:
    http://support.apple.com/kb/HT1554
    Depending on the size of the file, and the network strength, you can often move files using a small network:
    http://support.apple.com/kb/HT1433
    What problems are you having by hard drive? How full is the hard drive?
    How big is the hard drive? Which Mac models and operating system are they using?

  • What's the easiest way to transfer 60GB of pics from old mac to new mac

    I just got an awesome 24" iMac and want to permanently move 60GB of pics on my older MacBook Pro to my new iMac. I have iPhoto '08 on both computers. Do I just hook up the 2 computers via FireWire and import from within iPhoto on the new computer or is there something else I should do or look out for. Thanks

    use the migration assistant, if it's a brand new mac, it will transfer everyting from your old mac to your new mac.
    When I said everything, it's everything, your favorite in safari, your music, your email account, your internet connection setup and of course all your photo library.
    Migration assistant is in Application - utilities then choose migration assistant. You need to plug both computer together via a firewire cable.
    If you just want to tranfer the 60gb of photo you can just restart your old computer by pressing T and this will put your computer in target mode (you will see a big firewire logo moving on the screen. But make sure before you restart your computer and pressing the T, make sre both computer are plug together with a firewire cable.
    Then, the hard drive of the old computer will mount on the desktop of the new mac and you can copy your file, like any external hard drive

  • File transfer between mac and windows 7

    Is it possible to transfer files between my Mac and a windows 7 machine via bluetooth?
    MacBook Pro OS X 10.6.4
    Thanks

    It will be slow, but there's no reason it shouldn't work as long as the Bluetooth hardware on both computers has the File Transfer Profile (all Macs do), and *Bluetooth Sharing* is checked in the Sharing system preferences pane on the Mac.
    If the computers are close enough to send files via Bluetooth, you'd be much better off just networking them together. You can then "mount" the PC hard disk on the Mac like any other disk and move files around easily. It will be hundreds of times faster too.

  • Common URL format for sharing file paths between Mac and Windows?

    Hi -
    I have to integrate several Macs into a Windows environment. We need to be able to copy and paste file paths to share between all machines. Is there a common URL format that can be used between the platforms?
    On Windows, I have:
    \\server\share\file
    On the Mac:
    smb://server/share/file
    Thank you for your help,
    Steve

    On Windows you have what is known as a "UNC".
    On the Mac, you have a "URL". It starts with the protocol to use "smb" then gives the path to the item using standard conventions.
    UNC is Microsoft mainly.
    The only way I know for Windows to use a URL is with an application like a web browser or ftp client.
    On the Mac, you can use UNCs but they must be modified as follows.
    In Terminal:
    smbclient \\\\servername\\sharename\\filename -U username
    And enter a password if prompted.
    Notice that you must double up the slashes. This is due to how UNIX shells treat the backslash.
    You will connect to the share, but it will only be in Terminal.

  • Sharing Files between Mac and Windows XP PC

    I have an small office with three computers. There is a new Mac that basically acts as the server. There is a shared folder on the computer. The other 2 computers are PCs. All permissions have been set on the Mac. The other 2 users are set as Administrators on the Mac and have the ability to Read and Write. The other 2 users can access the files, but they are not able to make any changes. The shared folder has may sub folders. Any ideas?

    huh, i used migration assistant to create a user with all my old data. now i have 2 users. anyway, i was putting the old data i wanted (i plan to wipe out the old user) into the shared folder...and it was working fine. all of a sudden, i put files into the shared folder, and when i log in as the new user, i can't use the file. won't give me access.
    i've enabled file sharing, the files and folders are marked as shared, and well...it seems like file sharing is broken.
    ...ideas?

Maybe you are looking for