Easy Fix For Bluetooth and 1.1.3

On iPhone:
Settings/General/Reset/Reset Network Settings
Then delete previous paring on both devices and re-pair.

Temporary fix. Tried that. No luck. As soon as the devices fall away from each other (distance) and then come back together the bluetooth problem continues.

Similar Messages

My Adobe has stopped allowing me to move library books from my PC to my KOBO (both show authorized on the ADE. the message reads : CE_COPY_NOT_ALLOWED - No permission to copy book. It used to work. Any easy fixed for me?(I already tried uninstall and re-

My Adobe has stopped allowing me to move library books from my PC to my KOBO (both show authorized on the ADE. the message reads : CE_COPY_NOT_ALLOWED - No permission to copy book. It used to work. Any easy fixed for me?(I already tried uninstall and re-install)

Welcome to the Club! Got the same Problem and had a really hard time reaching the Customer Support because they were down due to maitenance! Just wrote to their experts chat and hope to get an answer in this life!
I tried to authorize my Computer and eBookreader with a new Adobe-ID, but it says I've done used this ID too often, even though it was brandnew! Can't copy my just-purchased eBook because "Copying is not allowed".
I hold my thumbs for you that Adobe solves this Problem fast enough. Other ways I'll sell my eBookreader and buy the Kindle-Reader from Amazon and say GOOD BYE to Adobe!

I was using my wife's MacAir while my Macbook was in for repairs and now all of my printers want to do through her Macbook Air and unless it is on and on our home wireless, I can't print. Is there an easy "fix" for this?

I was using my wife's MacAir while my Macbook was in for repairs and now all of my printers want to do through her Macbook Air and unless it is on and on our home wireless, I can't print. Is there an easy "fix" for this?

See this post.
tt2

Is there a fix for Bluetooth failing after 1-2 hours of play on my remote audio speakers? It sounds like "gargling". It occurs with all bluetooth speakers and quitting and restarting bluetooth is the only remedy I've found. Others?

Is there a fix for Bluetooth failing after 1-2 hours of play on my remote audio speakers? It sounds like "gargling". It occurs with all bluetooth speakers and quitting and restarting bluetooth is the only remedy I've found. Others?

8-doing a factory reset, then repeating steps 1 through 6
Do you mean a restore to factory settings?. If so did you set up as new or restore from back up afterwards?

As of today, I can no longer or Excel. I get this message: You can't open the application "Microsoft Excel" because PowerPC applications are no longer supported. Is there a fix for this and why ha this all of the sudden happened. I've rebooted 2x

As of today, I can no longer or Excel. I get this message: You can’t open the application “Microsoft Excel” because PowerPC applications are no longer supported. Is there a fix for this and why ha this all of the sudden happened. I've rebooted twice and that hasn't worked.

The application may be corrupt. Un-install and re-install Office.
Office 2011 Removal
Office 2011 Removal (2)

[svn:fx-trunk] 10001: Fix for TextGraphicNode and RichTextNode delegated content property.

Revision: 10001
Author:   [email protected]
Date:     2009-09-03 13:03:50 -0700 (Thu, 03 Sep 2009)
Log Message:
Fix for TextGraphicNode and RichTextNode delegated content property. We used to pick up cdata from before and after the content tags and consider them content, this was wrong and the new line and tabs threw TLF for a loop.
This change will need to be communicated to and integrated with, CoreTech.
QE notes: None
Doc notes: None
Bugs: SDK-22851
Reviewer: Paul
Tests run: Checkin
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22851
Modified Paths:
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/RichTextNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/TextGraphicNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/sax/FXG_v1_0_Handler.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/sax/FXG_v2_0_Handler.java
Added Paths:
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/ContentPropertyNode.j ava

[svn] 4235: Fix for - Links and type information missing for air.update. event events in @event listings

Revision: 4235
Author: [email protected]
Date: 2008-12-04 13:02:39 -0800 (Thu, 04 Dec 2008)
Log Message:
Fix for - Links and type information missing for air.update.event events in @event listings
Also adding support for multiple @event for a method.
QE Notes: None
Doc Notes: None
Bugs: SDK-18319
tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-18319
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocUtil.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/DocComment.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

Hi All,
I have sorted out the problem and this is fixed now.
Regards,
Ajay Kunde

[svn:fx-trunk] 8551: Fix for focusSkin and errorSkin to account for bogus bitmap snapshots when objects are 3D transformed .

Revision: 8551
Author:   [email protected]
Date:     2009-07-14 11:31:50 -0700 (Tue, 14 Jul 2009)
Log Message:
Fix for focusSkin and errorSkin to account for bogus bitmap snapshots when objects are 3D transformed.
Bugs: SDK-17766
Reviewer: Glenn
QE Notes: None
Doc Notes: None
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-17766
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/ErrorSkin.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/FocusSkin.as

Qosmio G30: I can not find Linux drivers for Bluetooth and TV Tuner

I have the Qosmio Q30 HD-DVD(PQG32) running on Ubuntu Linux. My Problem is I can not find drivers for Bluetooth and TV Tuner.
Does Toshiba support Linux? If yes when I find it?

TV tunner, forget it there is'nt a Linix driver for it yet.
Bluetooth NO PROBLEM
First turn on your wireless card.
2nd runn the command toshutils -b I think
toshutils is a support program for toshiba laptops.
you also need to have the bluetooth drivers loaded on your machine.
If everything is working correctly a little B bluetooth logo will appear on the top toolbar

[svn:fx-trunk] 12980: Minor fix for SliderBaseAccImpl and SpinnerAccImpl

Revision: 12980
Revision: 12980
Author:   [email protected]
Date:     2009-12-15 17:33:56 -0800 (Tue, 15 Dec 2009)
Log Message:
Minor fix for SliderBaseAccImpl and SpinnerAccImpl
QE notes: none
Doc notes: none
Bugs: n/a
Reviewer: Gordon
Tests run: checkintests
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/SliderBaseAccImpl.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/SpinnerAccImpl.as

Fix for BMW and iPhone v. 1.1.3 Bluetooth Pairing

If you lost Bluetooth connectivity with 1.1.3 and have tried deleting old pairings and starting over, without success, on your iPhone go to:
Settings/General/Reset/Reset Network Settings
Then make sure you've deleted your old pairing on both devices and pair once again. This fixed it for me!
Background: My '08 3-series BMW had flawless Bluetooth connectivity with Address Book support with 1.1.2, but lost it with 1.1.3. Resetting in the above manner restored it. Thanks to Sara at Apple Tech Support for the help.

Wesley's Networking reset solution worked for fixing the BlueTooth connectivity in my 05 545. I just got the iPhone, so it has OS 1.1.3. Now I need to learn to control the names/numbers originally in my Outlook files that come from the iPhone via Bluetooth to the car's names db. All contacts names and numbers appear on the car's screen, probably 2+ average for each of the 2500 or so contacts. Help!
Further, does anyone know how to field map (control) the names from Outlook that are sync'd to the iPhone? I'm getting some I don't want, and others that I do want don't come thru.

Is there an easy fix for nonfuctional on/off button?

My power switch no longer works. Is there an easy fix?

I do not know of any.
Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4g and $99 for the other 4Gs. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will fix the switch for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the switch yourself if you are up to it
iPod Touch Repair – iFixit

Is Apple Working working on a fix for Bluetooth glitch in iOS6?

I held off from the iOS upgrade so as to not loose google maps, and so now i can see that there is no quick fix for the obvious flaky Bluetooth!
Dose anyone know are they working on a soft fix?

Hi Barry,
Sorry if i wasn't clear. In relation to intermittent Bluetooth discusion:
https://discussions.apple.com/message/19819527#19819527
I am getting the same Bluetooth audio cutouts every 20 seconds or so. It just seems like there is no stability in the signal anymore. My audio Bluetooth headphones had been working brilliantly on iOS5 and have been using them daily for 3 years. I have tried all of the resets with no change and figured it was a code change. Have been a Mac use exclusivley since 98, but i'm no system expert, and was wondering if anyone new of a fix in the works? Cheers.

Adobe Flash Player 10 Fix for WinXP and Vista, IE7, IE8, Firefox, ect.(New Fast Fix)

(This is a possible solution for most users) I have found that inside the folder C:\WINDOWS\system32\Macromed\Flash (WinXP Home/Pro) (Computer > C: Drive > Windows > System32 > Macromed > Flash for Vista) there should be a file named FlashUtil10b.exe (IF NOT YOU SHOULD UPDATE AS SPECIFIED!) (or FlashUtil10a.exe or for older versions something similar depending on your version), which is the update utility for flash player. Click on this and if it updates, you will have to restart your computer. This should fix any missing files, and update you to the latest version.
On a side note to all those who read this, I downloaded and installed 5 different times, the same version, from different websites, all for the "new" flash version, and they didn't work (this also included trying to update Shockwave player itself). Apparently, going directly to the website and downloading a new version of Adobe Flash Player, and installing, doesn't uninstall the older version, (though it says it does nor does the uninstaller work directly from the website) nor fixes the problem. I assume they are aware of this problem, because they included this bug fix in revision 10b. This fix should work for those of you whom cannot view/see flash images as well. There also appears to be a bug/reference problem with the installation of IE8 giving the error "Missing Shockwave Decompression XTRA", when trying to play a Shockwave/Flash file, which seems also to affect Firefox and other browsers. It doesn't recognize that the folder or files that it needs in it, exist. I never had his problem before, until IE8 was installed. I checked which version I had in the system32 folder and found this updater built in to Adobe. Version 10a does NOT automatically update, but version 10b includes this fix. I currently had version 10a when I received this error, and began digging for a solution. Doing the update as described above fixed the problem, and updated it to version 10b.
The new flash version 10b has some new features, such as volume control, auto-updating, and several rendering options for those who may have a faster or slower computer/video card.
I found this works great for XP users but unsure of the Vista users. The process is the same for Vista and the update should still work the same, as long as you run it as Administrator, I assume. I have this also posted on wwwdslreports.com at http://www.dslreports.com/forum/r22115254-IE-IE8-and-Adobe-Flash-Question and here http://www.dslreports.com/forum/r22361930-Adobe-Flash-Player-10-Fix-for-WinXP-IE 8-Firefox-ect. It appears to work for everyone so far. I have not heard of any problems from users with this problem running the RC (Release Canidate) for Windows 7 yet.
I hope this works to your benefit.
Please leave a reply to help Adobe and other users know if this fix worked for you or not. If not, please explain what you did, and the effects your seeing, including operating system, site of the flash file trying to view, browser type (ex. IE6, IE7, IE8, Firefox, Opera, ect.), and I will try to help you as best I can.
(I would strongly recommend those not using IE8, or Firefox 3.5, get the updated versions)
If your looking for uninstallers go to this site: http://kb2.adobe.com/cps/141/tn_14157.html
If your looking for a true full install, you can download this developer version for Windows and Mac: http://download.macromedia.com/pub/flashplayer/updaters/10/flash_player_update2_flash10.zi p (44MB) (If you download this, I would recommend you still follow my instructions for the Flash Utility before restarting your computer.)

I would recommend all users having problems try the above solution first.
I have posted this on a couple of websites, and so far it has fixed everyones problems.
Firefox 3.5 Beta 4 has Adobe Flash Player coding built into the browser so that it not only loads faster but works better.
You still need to have the Adobe ActiveX plug-in and Adobe Flash Player for both browsers.
I would also recommend you download Shockwave Player 11.
IE8 has tried this as well, but it still has a couple bugs in it.
If you have IE8 or FireFox 3.5 Beta 4, and you are still having problems, then I recommend that you go to www.windowsupdate.com and get all of the latest updates (including SP3), then try this fix again.
Your auto-updater built into windows (If you even have it on) doesn't always pull down every update available for your computer. It only pulls down the manditory ones.
Sometimes you HAVE to go to the website and manually get them yourself. I recommend when you go to the website, you click on custom install and pick every last one of them to install, which includes, hardware and software fixes for your computer.
What a lot of people don't know is that when you have installed and tried all of the recommended fixes that Adobe gives you, and it still doesn't work, is that you are having registry conflicts within your Operating System (OS ex. WinXP, Vista, Linux, ect.), and that it is not the Adobe software at all.
Those are usually repaired by making sure your computer stays up to date.
The fact is the computer world is changing so rapidly that everyone can't keep up. You have to check for updates weekly.
If you fall behind on those updates, then you start having problems with your computer and/or software.
One problem then can turn into many and people get frustrated when something all the sudden just quits working.
Take a day or two at least once a month, and make sure you update and maintain your computer.
This includes disk defragmenting, disk cleanup, and making sure you have all the lastest updates.
You can get to Disk Defrag, and Disk Cleanup by going to Start, All Programs, Accessories, then to System Tools.
I would do Disk Cleanup first, then Defrag.
I hope you take this advise into consideration, and that it is very helpful for you.
If you find this useful, please come back and reply to this forum, and let everyone know so that others will be encouraged to do this.
Thanks and goodluck, from another user like you.

Fix for Jaggies and Ripples in Ken Burns Photos?

I thought using the Ken Burns effect to render your photos was supposed to be a cure for the jaggies, but I still notice a lot of jaggies and ripples during photo panning and zooming in the finished DVD. Is there a fix for this? Am I overlooking something?
BTW- As recommended, I don't let iMovieHD do the rendering of everything else. I drag the project to iDVD and let it do the job.
One other observation- iMovie08 seems to do a MUCH better job with the Ken Burns effect. Unfortunately, the rest of the movie doesn't seem to be as crisp, and the transitions, effects, etc, in iMovie 08 are more limited. (plus I hate the user interface).

oregonpete wrote:
BTW- As recommended, I don't let iMovieHD do the rendering of everything else. I drag the project to iDVD and let it do the job.
I keep seeing this suggested in thread after thread. However, I'm still a little confused by it. I'm assuming that this suggestion refers to not exporting out or sending to iDVD when FINISHED with iMovie Project.
Because doesn't iMovie do some "rendering" while you're working in it? It "renders" transitions, effects, etc.
I'm assuming that it's just a difference in the context and time of the "rendering" that makes it different, but using the same term confuses me.
If someone could clarify this or explain it in more depth, I would be grateful.

Easy Fix For Bluetooth and 1.1.3

Similar Messages

Maybe you are looking for