'Easy Set-up' Option - Problem with edit canvas/windows - really need help!

Hello Everyone. . .
Have a problem that i really need help with, i have tried so many different things to sort this - but with no sucess.
I usually work in High Definition and i have recently done a small project for someone in DV. When changing to work in DV, i selected the DV setup from the 'Easy Setup' menu. I have now changed back to HD and there are a few things different with Final Cut that i can't shift!
When i move a clip from the capture bin into the edit window, the clip no longer fills that window like it always used to and there are lines at the top and the bottom of the clip - almost like it is in widescreen.
Editing like this wasn't too much of a problem, but when i came to compress and do a final render of the whole film - there was the same black lines on the top and bottom of the film.
I can't figure out how to get the setting back to how they were, and have the clips fill the edit windows and fix the end render/compress.
Any ideas from anyone on what i am experiancing with all this? And. . . how to fix this problem?
Any help on all this will be very much appreciated!

Similar Messages

Problems with poor wifi signal strength, need help?

Any suggestions would be greatly appreciated? This is a lengthy explanation. Thanks in advance.
I have a 3rd generation Airport Extreme wirelessly bridged to a 4th generation Time Capsule. I have noticed only mild increase in signal strength. Surprisingly I have only 1 – 2 bars of signal strength when standing next to the bridged Airport Extreme. There are areas of the house that continue to have very weak coverage ranging from 0 – 2 bars depending on the day and others that continue to have no wifi coverage.
The house has Cat 5 cable in all rooms. Most rooms only have a phone jack wired to the end of the Cat 5 cable but two rooms have data ports. All the wires (phone and data) run to the same junction box and are connected to, what appears to be, a simple parallel bridge. (There are a couple unused access points on the bridge. A few years back, I ran an additional line for a phone by simply pressing the colored wire into the corresponding site and the phone works fine)
It was suggested to plug the two routers directly into the data ports rather than have them communicate wirelessly. When doing this, I had no signal at the other end and the phone stopped working.
What is the best way to fix the weak wifi signal problem?
1.     Do I need to tweak my current wireless set up? (FYI, In the Airport Utility, both devices are listed and have green dots)
2.     Do I need to buy an additional Airport Extreme to bridge to the Time Capsule to cover the current dead areas? (unless there is something I should do different in the set up, hesitant to do this, since I have only seen a marginal boost with my current bridge)
3.     Would it be better to use the existing cat 5 cable and create a functional “hard wired” network that I can use to connect the two wireless routers? (If this is the answer, is this something relatively simple that I can do myself or should I hire a professional?)
Thanks again.

The house has Cat 5 cable in all rooms. Most rooms only have a phone jack wired to the end of the Cat 5 cable but two rooms have data ports. All the wires (phone and data) run to the same junction box and are connected to, what appears to be, a simple parallel bridge. (There are a couple unused access points on the bridge. A few years back, I ran an additional line for a phone by simply pressing the colored wire into the corresponding site and the phone works fine)
It was typical awhile back, where you have "whole-house" Ethernet running back to a patch panel to use the cable runs for both data and phone service. This works fine as long as you only wanted 100 Mbps Ethernet (or Fast Ethernet) connections for data. Gigabit Ethernet requires all of the twisted pairs in the CAT-5 cable and cannot share any of those pairs for phone lines.
So any wall outlet that is wired for both phone & data will not provide Gigabit Ethernet ... unless there are at least two CAT-5 cables going to that outlet. I am only mentioning this as to the potential for reduced bandwidth on some of your connections as all of your AirPort base stations are Gigabit capable.
As far as "weak" signals, I am assuming that you have configured all of your AirPort base stations for a roaming and NOT an extended wireless network ... correct? Even if you already have, please review the following Apple Support article to make sure you didn't miss anything. Please post back your results.

Xfi Xtreme Audio Problems with Microphone and other things NEED HELP!!!!

? Alright i have exhausted my search for an answer for my problems.... This is a last resort now!
Im running Windows 7
st Problem: I was having problems with my microphone where people heard themselves through my microphone. Ok well i have a creative Fatility series headset with a supposed noise canceling mic. So last night i was like screw it imma put in the install disk for my sound card Xfi Xtreme Audio.
This Arose my 2nd Problem: Now that the drivers were installed and i finaly got a volume panel it says im running Windows Vista. The name next to my card says Sound Blast X-Fi Xtreme Audio (Vista). Alright so i am running windows 7.... What the heck! Next thing is my microphone doesnt even work! This is just awsome btw and im pretty sure the volume panel isnt even the way it was when i was on an XP system.
So if anyone has a fix to this problem let me know it would be great!

A quick update i was able to fix Problem 2, i had to get rid of what i installed so im just back to Problem . I dont have the VOlume Panel anymore but my microphone still seems to make it so that people can hear themselves....

Serious problem with my 3720 classic! NEED HELP!

Hi! Today I switched on my pnone and after a while it rebooted. After that reboot, its rebooting after a couple o minutes again and again and again. Yesterday it was just fine! i have about 8000+ messages, but I cant back them up with ovi suite or nokia pc suite (older) because its rebooting constantly. What to do? I did a soft factory settings reset, but no effect...

No, I have not upgraded my phone. My phone is as it was the first ime i bought it. The weird is that the day before the problems it was just fine, then I switched it of, and the next day it was malfunctioning.
If I dont create any new playlist or try to delete any folder (files I can) th phone works fine, unless there are things that I haven't go to yet and might cause the phone to malfunction again..
If I try to create a playlist, it reboots constatly until I make a hard reset.
""Updating / Re-installing the firmware may help.. but there is a danger of phone re-booting during the process.. that may prevent a successful update and create more problem for you..""
What do you mean? When I tried the first time the hard reset, it failed, and I had to do it 2 more times untill it was successful. Do you mean this,or a firmware update? (I didnt made any firmware update)
If I make a firmware update, is it going to solve the problem??

Huge problem with external hard drive.. need help

Hey everyone! After a series of unfortunate events that began innocently enough, it appears I've trashed my WD 60 GB external USB hard drive.
I was using the drive to back up my iTunes library. When I found that it was also backing up my 30+ GB of video onto the drive and saw how slow it was, I clicked "stop" in iTunes which actually caused it to 'unexpectedly quit'. (I saw it coming).
So I tried to delete everything off the drive so I could try again (after removing videos from my iTunes Library). I found that it wouldn't let me delete everything, so I went to Disk Utility and went to erase to get rid of anything on the drive.
That failed multiple times and I kept quitting out until I got it to work. Now that's where I am now. After the erase, the disk is basically unusable. iTunes alerted me saying that the disk "cannot be read or written", and Disk Utility will not verify, repair, erase, or partition the disk being that "the disk cannot be unmounted".
Can anyone tell me how to wipe this drive so I can bring it back to a "clean slate" state????
Thanks a lot,
Alex

You may have hosed the drive because iTunes unexpectedly quit while it was still writing to disk.
You should try WD support. Also,DiskWarrior may be able to unmount your disk, but run DW from the CD as there are installation issues on a 10.5 system.
-mj
[email protected]
Message was edited by: macjack

Problem with resolveExpression method! IMPORTANT NEED HELP!!!

HI!
I use resolveExpression method
public static Object resolveExpression(String expression) {
FacesContext ctx = getFacesContext();
Application app = ctx.getApplication();
ValueBinding bind = app.createValueBinding(expression);
return bind.getValue(ctx);
And then in JSP page I want to get the binding:
String b = (String) koki.view.util.JSFUtils.resolveExpression("#{binding.PasesP52.inputValue}");
But when I print "b", the value is null! Can you explain why??? And what I need to do??
BEST REGARDS

Debuger,
Did you mean to use "#{bindings.PasesP52.inputValue}"?
I would suggest you try running some code like this (use the debugger so you can see step-by-step):
Object b = koki.view.util.JSFUtils.resolveExpression("#{bindings}");
Object p = koki.view.util.JSFUtils.resolveExpression("#{bindings.PasesP52}");
Object i = koki.view.util.JSFUtils.resolveExpression("#{bindings.PasesP52.inputValue}");Is b null? If so, does your JSP page have a corresponding page definition?
Is b not null, but p is null? Does the page definition have an element PasesP52?
e.g., break down the problem and do a little debugging.
Note: my first guess would be that you meant to say "bindings" and not "binding"
Best of luck,
john

EAR Deployment Problem with weblogic 10.2. Need help.

Hi,
I have a EAR file exported from MyEclipse IDE. When i am deploying the EAR file in weblogic 10.2, i am not seeing classess and properties were not exploded under WEB-INF/classes in the web project. I can see the classes folder but it's empty.
When i opened i can see EJB project JAR file and web project .war file in the EAR file. I checked the .war file content and i can see all the classes and properties available in the .war file.
Please help me to find, why the classes and properties are not being exploded when i am deploying as package.
Note: When i am deploying from myeclipse as exploded deployment i was able to run the application but i am failing when i deploy as a package (.ear file).
Thank you,
Vijay M

I found the answer to this. The documentation is not clear enough, LD_LIBRARY_PATH MUST be set and MUST have a pointer to the directory where the SSL .so modules are. I wrote up a blog article explaining the configuration and detailed this issue.
http://blogs.oracle.com/irm/2010/06/quick_guide_to_oracle_irm_11g_1.html

Problems with Update!!! Need help!

Hey guys,
I am not able to do the latest update (4.3.5) for my iPhone AND for my iPad ... I don't know what's wrong ...
If someone knows an answer ... please reply :-)
Thank you

I have the same problem, I've updated my iPhone 4 directly in my MacBookPro without problems, now I'm trying to update my wife's iPhone 3GS in hers PC and having the network timed out problem. Its strange since we are in the same WiFi network.
I have disabled antivirus, and firewall

Problem with double....,need help!

Why double area = 1/2*3.14*r*r(r is a double)
area = 0.0 ???????
Somebody know what's going on????????

dapumptu -
Just to make sure you learned from this - can you explain to us why 1/2 is equal to 0?
Please everyone else, don't answer - give him a chance to answer himself!
- K
Why double area = 1/2*3.14*r*r(r is a double)
area = 0.0 ???????
Somebody know what's going on????????Yes. 1/2 is 0.
0*3.14*r*r is 0.
Force the double (1.0, 2.0) should work.
Cheers,
Radish21

Problems with my spry menu bar, need help

i made a spry menu bar, and it works on my computers at my house and my computers at school, but on other computers the home page menu bar is in the middle of the page (not on the left side) and on the other pages the menu bar submenus dont go out to the side of that button, its hard to explain but the "designs" button has a sub menu that is supposed to go out to the side of it but it goes out to the side at the top!.. please look at it for me...?
www.branchoutadvertising.com
Linda

i made a spry menu bar, and it works on my computers at my house and my computers at school, but on other computers the home page menu bar is in the middle of the page (not on the left side) and on the other pages the menu bar submenus dont go out to the side of that button, its hard to explain but the "designs" button has a sub menu that is supposed to go out to the side of it but it goes out to the side at the top!.. please look at it for me...?
www.branchoutadvertising.com
Linda

I have a problem with linking media. I need help with the process

I can't seem to locate the media off my external or dropbox. I have the project file opened it's just offline and won't let me go back to locate it.

You need to ask in the forum for the program you are using
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Having problem with the f key shortcuts, need help

I connected my macbook to my hdtv, and used a wireless keyboard and put in new f commands, when I unconnected it, and tried to use the f keys on my macbook, they wouldn't work, I just get that ring noise, I tried to go to the settings and fix the f keys, but it wouldn't work, I pressed the default button and it didn't work the keys are still messed up, and theres no way to fix the f buttons, when I press the decrease or increase brightness buttons they won't do anything now, and I don't know how to fix this so they do work, can someone give me some help so I can fix this, thanks.

I connected my macbook to my hdtv, and used a wireless keyboard and put in new f commands, when I unconnected it, and tried to use the f keys on my macbook, they wouldn't work, I just get that ring noise, I tried to go to the settings and fix the f keys, but it wouldn't work, I pressed the default button and it didn't work the keys are still messed up, and theres no way to fix the f buttons, when I press the decrease or increase brightness buttons they won't do anything now, and I don't know how to fix this so they do work, can someone give me some help so I can fix this, thanks.

I just bought my MacBook Pro 13" and I tried to install an anti virus but then it went into a grey folder with a question mark I need help with restoring the iOS please

I need help taking out the grey folder with the question mark and I've try everything except the CD thing because my MacBook didn't come with one so I really need help please

What anti-virus software did you install? Although there's a lot of bad anti-virus software out there, no anti-virus software should cause such a problem. A gray screen with a flashing question mark on a folder means that no bootable system could be found, which means that the system was badly damaged or corrupt. Even installing bad software would not normally cause that, so either there was something badly wrong with the system already or the anti-virus software you tried to install was really, really bad!
As mende1 says, you need to reinstall the system at this point. After your system is back up and running, read my Mac Malware Guide. If, after reading that, you want anti-virus software, use one of the programms recommended in that guide.

Problem with Edit IN function between LR 2.3 and PS CS3

I recently upgraded my system to a Windows Vista 64 bit Core 2 Quad with 8 GB. Lightroom now works and loads images the way it should. I do have one major concern and need any help possible.
I am using LR 2.3 in 64 bit and PS CS3 ver 10.0.1 (which is 32 bit - loads slowly but otherwise works fine). The problem I am encountering is in LR Develop / Photo / Edit In... - using any of the menu items:
"Edit in Abode Photoshop CS3"
"Open as Smart Object In Photoshop"
"Merge to Panorama in Photoshop"
"Merge to HDR in Photoshop"
"Open as layers in Photoshop"
Photoshop opens but no image(s) are exported and I receive the message in LR - "The file could not be edited because Adobe Photoshop CS3 could not be launched."
Photoshop, however, was launched but no image exported and so I can't work on the image in PS. The appropriate TIFF image is created in LR for the first two menu items - nothing for the last three menu items.
I can create a partial work around by setting PS as an external editor, however, I can't use 4 of 5 of the menu items.
All the menu items work fine in Windows XPpro.
Any help is much appreciated.
PS I also tried the most recent Window 7 RC with exactly the same results.
Thanks
Bob

Don
I wasn't shouting - I just cut and paste the exact text and font in its original size and type as was shown in the message. Never had a thought that someone would be offended by cutting and pasting exactly what was in a message - it would appear that John Williams saw it for what it was.
However, sorry if I offended you.
Bob
Date: Mon, 1 Jun 2009 19:15:15 -0600
From: [email protected]
To: [email protected]
Subject: Problem with Edit IN function between LR 2.3 and PS CS3
There is no reason to shout. There are only other users here trying to help.
>

After iphoto 9.1.5. problem with editing photos

After I did the 9.1.5. update I have a problem with editing photo's. My photo's are about 35mb a piece.. they are panoramic photo's. Editing used to work perfect in iphoto 8.. after I went to iphoto 9 it became buggy.. (it crashes on certain photo's that 8 could handle without a problem).. but I learned to live with it. Now I did the 9.1.5. update and I can edit maybe 2 or 3 pics without a problem.. then when I get to number 4 Iphoto will show me a black screen.
If I close iphoto and start it again, I can continue where I left off.. untill I get to a picture that seems to ruin the party.. and then I have to restart again..
Iphoto 8 used to work so smooth with panoramic photo's.. dont know where it went wrong..

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

'Easy Set-up' Option - Problem with edit canvas/windows - really need help!

Similar Messages

Maybe you are looking for