EBiz 11i Integration and Printing with TOMCAT/COCOON

Hi,
I have successfully set up a TOMCAT/COCOON printing environment on a Red Hat LINUX server. I am able to produce PDF's from all of my APEX applications with the exception of those defined in our 11i (11.5.0) eBusiness application.
I use the exact same settings in all instance settings. All run under AIX 5.3 and all can see (ping) the print server. Similarly the print server can see (ping) all of the APEX servers.
However, trying to produce a PDF from an APEX installation hosted in our eBusiness environments (either from within or outide of the eBusiness application) results in the dreaded HTTP 404 Not Found error.
Is there something else I need to consider when trying to use a print engine on another server when called from an eBusiness database/application server?
Any help appreciated.
Thanks,
Rob

Hi David,
Thanks for the feedback. We are on 10gR2 database, but I re-checked logs to include the error_log_pls file as well as error_log!
In the error_log_pls I see oracle error ORA-22293. As you may know 11i uses 9iAS by default, and associated Apache. I had made use of the installed Apache in the IAS_ORACLE_HOME. Thanks to your pointer, I have seen suggestions that the issue may be resolved by making use of Apache that comes with 10g. My concern here would be that the seamless integration I have between APEX and 11i (printing aside) will be compromised - the entries I use in defining the function within 11i may need to change.
I will install Apache from 10g and see what transpires.
As an aside, I do have a lot of dealings with Oracle Support and I wouldnt necessarily share unqualified endorsement of their capabilities :) . I didnt raise an SR this time because I had figured there was some issue with Cocoon and the 11i server rather than with the Oracle software itself. Maybe I was wrong!
I will update when I have further information.
Thanks again.
Rob

Similar Messages

PDF with Tomcat/Cocoon Problem !!!

Hi,
I am having problem with Tomcat/Cocoon combination for APEX PDF printing which I installed following Carl Backstrom instructions.
When a report is a region report it all works fine, but when I create a report based on a query from the reports section in Shared Components choosing report layout 'Use Generic Report Layout' I get the following error.
javax.xml.transform.TransformerException: attribute-set named #TEXT_ALIGN# does not exist
cocoon://fop_post/xsl - 148:58
Cocoon stacktrace[hide]
attribute-set named #TEXT_ALIGN# does not exist
cocoon://fop_post/xsl - 148:58
I will appreciate any feedback. I saw threads related to the same issue on this forum but they ended up covering something irrelevant.
Regards,
Vadim

Vadim,
Report queries and report region use the same generic report layout. However the processing is handled by different engines. The underlying technical problem with your case is that the substitution string #TEXT_ALIGN# is not substituted in all cases for report queries. This usually does not cause any problems, but appears not to work when using Cocoon.
I'll see that we can this resolved with the next version of APEX, however when working with report layouts, you would typically use your own RTF or XSL-FO stylesheets, where this problem would not occur. The option to use the generic report layout is only included so the data can be tested independently from the layout and is not really intended to be used as the actual layout at runtime.
The generic report layout function is mainly designed to be used for report regions.
Regards,
Marc

HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

hi
could you tell us what the other app is please

I have an iMac running OS X 10.8.3 and have connected an Epson Workforce 2540 printed that is allegedly Airprint enabled. I can connect and print with a USB cable but can't connect via Airprint. My colleague running 10.7 can. Is this a feature of 10.8?

I have an iMac running OS X 10.8.3 and have connected an Epson Workforce 2540 printed that is allegedly Airprint enabled. I can connect and print with a USB cable but can't connect via Airprint. My colleague running 10.7 can. Is this a feature of 10.8? Any ideas for a fix?

iOS devices use AirPrint to connect to a supported printer. OS X will use Bonjour to locate and connect to the same printer.
With the Epson connected to your wireless router, when you open Print & Scan and click the plus button to add, does the Epson appear in a small box with a heading of Nearby Printers?
If not and a window appears showing Default, Fax, IP and Windows in the toolbar, do you see the Epson with the Default view selected?

Report previews and prints with strange characters

I have a custom XI application which uses CCrystalReportViewer11 (C++ wrapper around ActiveX control) to preview reports. This works for hundreds of installations, but for one the text is displayed and printed with strange characters. If the customer exports the report the characters are displayed as normal. What could be wrong?

More than likely, it's a printer driver issue. It may even be that there is no default printer driver installed. Also, see if setting a different default printer driver helps. You can also set the "No Printer" option in the report by opening it in the designer and going to the File menu and selecting "Page Setup".
Ludek

When printing from aperture my margins are unequal, even if i set my margins they come out bigger one side and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000

when printing from aperture my margins are unequal, even if i set my margins they come out bigger one side and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000.
please can anbody help or advise?

You didn't mention any color calibration being done on your monitor. This is an essential part of any color-correct workflow. What are you using to calibrate your monitor (and your printer)?
Print profiles (for soft-proofing as well as printing) are for specific combinations of paper & printer. The nine you have are each, most likely, for a common paper (perhaps mfr'd by Canon) to be used with your printer.
I don't know what you mean when you say "I choose a high standard print option".
Have you read the User Manual chapter on printing?
Printing Your Images
There is also a good appendix on calibration:
Calibrating Your Aperture System

External-graphic not shown in PDF with Tomcat / Cocoon / Ubuntu

Hi,
this weekend I set up a virtualbox with Ubuntu 8.04 OS; APEX 3.12 @ Oracle 10gXE; Tomcat 6.014; Cocoon 2.1.11; fop_post sitemap file according to Carl Backstrom blogpost ([http://carlback.blogspot.com/2007/03/apex-cocoon-pdf-and-more.html]); to experiment with APEX & PDF printing.
Tomcat is configured to listen to port 8888; APEX to 8080.
I have setup APEX according to Carl's blogpost. All is working fine; I can generate PDF reports using the standard templates. I'm new to XSL, but decided to go wild. I decided to include a JPG graphic.
I followed the example in Scott & Spendolini, Pro Oracle Application Express, page 399. However the image is not shown in the PDF, nor is there an error message produced. What is wrong?
This is the relevant section of source code I have used:
<fo:static-content flow-name="region-footer">
<fo:block xsl:use-attribute-sets="text footer">
<fo:inline xsl:use-attribute-sets="body-font page-number">
<fo:external-graphics width="50px" height="50px" src='url("http://www.fiat128.nl/images/fiat128.jpg")'/>
<fo:page-number/>
</fo:inline>
</fo:block>
<fo:block xsl:use-attribute-sets="text text_2 #PAGE_FOOTER_ALIGNMENT#">
<fo:inline xsl:use-attribute-sets="page-footer">#PAGE_FOOTER#</fo:inline>
</fo:block>
</fo:static-content>
all help is appreciated. Is there a problem with Cocoon and Linux?
many regards,
Ronald van Dijk
Edited by: user614694 on Oct 6, 2008 3:09 AM
Edited by: Ronald van Dijk on Oct 6, 2008 3:10 AM

Hello Ronald,
Your code looks fine to me. Although xsl-fo is not very friendly for a slight change...
This is an example I use during my PDF printing presentation:
<fo:static-content flow-name="region-header">
<fo:block xsl:use-attribute-sets="text text_2 text_0 #PAGE_HEADER_ALIGNMENT#">
<fo:inline xsl:use-attribute-sets="page-header">#PAGE_HEADER#</fo:inline>
</fo:block>
<fo:block border="0.5pt solid silver"
background-image="url('http://o11g1.apex-evangelists.com:7779/i/htmldb/apex_logo.gif')"
padding="12pt"
text-align="center">Apex Evangelists
</fo:block>
</fo:static-content>
Does that work for you?
(change o11g1.apex-evangelists.com:7779 to your hostname:port - and see that you get the image by using the url)
I've sometimes seen problems displaying certain pictures or specifying the width.
Regards,
Dimitri
http://dgielis.blogspot.com/
http://www.apex-evangelists.com/
http://www.apexblogs.info/

Pdf reader X has problems with small pdf and printer with post script driver

Hi friends.
I have installed new Reader X and then i saw that, when i print a very small pdf with about 50 kb and i print it on a Laserjet 4000 printer the printer has problem with the amount of data that reader 10 produces.
When i install a Postscript driver for the printer my computer makes up to 3.5MB printer data from a 50kb pdf.
When i install a PCL driver for the printer my computer makes only 350kb from the same 50kb pdf file!!!!
When i install Reader 9.3 the 50kb file becomes also only 350kb on the printer with post script driver, and i can print without problems also.
my printer has 8 MB Ram and that should be enough for 3.5MB printer data.
But when i print the pdf with 1 side only, the printer created a side who is only filled with 50% of the text, then there comes out a second page with the message.....not enough memory in the printer.
i can not change the postscript driver to a pcl driver cause our ERP System can not handle printer with PCL drivers.
Can someone help me please.........are there settings in Reader X who can solve my problem ???
Thank you very much for help!

put ? after rwcgi60.exe

Anybody has any problems with installing and printing with canon lbp6650dn?

hi,
i bought a new i-sensys lbp6650dn and i am trying to make it work with my macbook 10.5.8. the installation cd that comes with it does not work with mac. i downloaded the latest drivers from canon's website, and could add the printer to my list.
computer's connected to the printer with USB. both the computer and the printer show no error, but whenever i try to print a document it starts printing jumbld letters and numbers that look like programme codes. moreover, it prints around 20 pages for a 1-page document. does anybody know what the problem might be? i am not sure whether there is something wrong with the computer's settings or the printer's. it's the first time installing a printer is giving me such a hard time. any help would be much appreciated.
thanks!

Try reseating your memory. Sometimes this occurs when the RAM is not seated all the way in the slot.
You could also boot from your 1st install disk while holding down the D key. Then run the diagnostics on your MacBook.
Message was edited by: First Magus

Can I hook up my ipad to a printer and print with it?

I work in a rural area where we can only get satelite internet. We want to start printing orders here and I know there is an app for printing, however we do not have a wireless printer, Do we need to buy one or can I use the charging cord my Ipad came with and hook it up with the USB to my existing printer and print that way? Any help would be greatly appreciated!
Tiffany

You'll need a printer that is compatible to AirPrint, see this article:
http://support.apple.com/kb/HT4356
You can't use the cord to connect.
There are apps inn the app store that let you print over the Internet, without having an AirPrint compatible printer.

In Acrobat Pro XI, can I limit the form I created to "fill in and print," with no saving or signing?

I created a fillable form from a word doc using Acrobat Pro XI.
When I look at the form in Acrobat Pro, I see the following at the top of the form:
If I look at the form on a computer running just Adobe Reader, this is what displays at the top:
I just want users to fill out and print this form. The instruction that Adobe Reader is giving is confusing. Can I modify those instructions, or change the file properties of my form somehow to limit to "fill out and print?"
I don't recall encountering this before in earlier versions of Acrobat.

Finally figured it out -- if I view the form directly in Adobe Reader (over our network), I see the confusing message about "Click 'Sign' to fill out..."
BUT, if I open the form within a web browser (IE, Firefox, etc.), I see the usual message: "Please fill out the following form. You cannot save data typed into this form. Please print..."
It is doing what I expected; I just wasn't viewing it in the usual manner. Users will be seeing this form via a web browser, so problem solved.

ALV report editable to enter text and print with including the text?

Hi all,
I have to display output of a report in ALV format and i have to make two fileds can be editable to enter texts by user and able to print the list with that texts .
Is it possible using standard Function modules or I have to go for OO methods? Please give the sample code ?
Thanks,
Vamshi
Edited by: VAMSHI KRISHNA on Oct 31, 2008 4:25 PM

Hi Vamshi,
Check out the Below sample code for the editable ALV.
*& Report Z7CC_OOPS_ALV_EDITABLE
report z7cc_oops_alv_editable.
tables sflight.
data: begin of gt_outtab occurs 0.     "with header line
        include structure sflight.
data: celltab type lvc_t_styl.
data: end of gt_outtab.
data: gt_fieldcat type lvc_t_fcat.
data: g_carrid like sflight-carrid,
      g_connid like sflight-connid.
data: gs_spfli type spfli.                                  "#EC NEEDED
data: g_custom_container type ref to cl_gui_custom_container.
data: g_container type scrfname value 'BCALV_GRID_DEMO_0100_CONT1'.
data: g_grid type ref to cl_gui_alv_grid.
data: wa_outtab like gt_outtab.
*       CLASS lcl_event_receiver DEFINITION
class lcl_event_receiver definition.
public section.
    types: begin of sflight_key.
    types:   carrid type s_carr_id.
    types:   connid type s_conn_id.
    types:   fldate type s_date.
    types: end of sflight_key.
    types: sflight_keys type standard table of sflight_key,
           sflight_table type standard table of sflight.
    methods:
      handle_data_changed
         for event data_changed of cl_gui_alv_grid
             importing er_data_changed.
    methods:
      get_inserted_rows
           exporting
              inserted_rows type sflight_keys.
    methods:
      get_deleted_rows
          exporting
              deleted_rows type sflight_table.
    methods:
       refresh_delta_tables.
    methods: set_table_is_initial.
    methods: set_table_is_not_initial.
    methods: table_is_initial
                returning value(initial) type char01.
private section.
* §4.Define internal tables to remember inserted and deleted lines,
*    thus the delta between input made after the last saving.
    data: inserted_rows type sflight_keys,
          deleted_rows type standard table of sflight.
* This flag is set if any error occured in one of the
* following methods:
    data: error_in_data type c.
* This flag signals that no records were read for the flight
* table initially:
    data: initial_table type c.
** Methods to modularize event handler method HANDLE_DATA_CHANGED:
    methods:
      check_double_entries
         importing
            pr_data_changed type ref to cl_alv_changed_data_protocol.
    methods:
      update_delta_tables
         importing
            pr_data_changed type ref to cl_alv_changed_data_protocol.
    methods:
      perform_semantic_checks
         importing
            pr_data_changed type ref to cl_alv_changed_data_protocol.
    methods:
      get_cell_values
           importing
             row_id          type int4
             pr_data_changed type ref to cl_alv_changed_data_protocol
           exporting
             key             type sflight_key.
endclass.                    "lcl_event_receiver DEFINITION
class lcl_event_receiver implementation.
method handle_data_changed.
*    data: ls_good type lvc_s_modi,
*          l_price type s_price,
*          ls_new type lvc_s_moce.
*    error_in_data = space.
** check if there exist double entries
*    call method check_double_entries( er_data_changed ).
** remember new or deleted lines for saving
*    call method update_delta_tables( er_data_changed ).
** check mt_good_cells semantically
*    call method perform_semantic_checks( er_data_changed ).
*    if error_in_data = 'X'.
*      call method er_data_changed->display_protocol.
*    endif.
endmethod.                    "handle_data_changed
method check_double_entries.
    data: lt_good_cells type lvc_t_modi,
          ls_good type lvc_s_modi,
          ls_key type sflight_key,
          ls_sflight type sflight,
          l_flightdate like gt_outtab-fldate,
          l_del_row type lvc_s_moce,
          ls_outtab like line of gt_outtab,
          l_reentered type c.
* §5.Check if there exist already other records with equal key fields.
* Check if the user has entered two new lines where the key fields
* are equal.
* Since CARRID and CONNID are read only, the check is restrained
* to field FLDATE.
* Algorithm: Copy all entries in MT_GOOD_CELLS to a dummy table.
*            During the copying procedure check if there exists
*            already a line with the same Flight date.
*    loop at pr_data_changed->mt_good_cells into ls_good.
*      case ls_good-fieldname.
*        when 'FLDATE'.
*          call method pr_data_changed->get_cell_value
*                      exporting
*                            i_row_id = ls_good-row_id
*                            i_fieldname = ls_good-fieldname
*                      importing e_value = l_flightdate.
*          read table lt_good_cells with key
*                            value = l_flightdate
*                            transporting no fields.
*          if sy-subrc = 0.
** There exists already a line with the same flight date!
*            call method pr_data_changed->add_protocol_entry
*                         exporting
*              i_msgid = '0K' i_msgno = '000' i_msgty = 'E'
*              i_msgv1 = text-m01
*              i_fieldname = ls_good-fieldname
*              i_row_id = ls_good-row_id.
*            error_in_data = 'X'.
*          else.
*            ls_good-value = l_flightdate.
*            append ls_good to lt_good_cells.
*          endif.
*      endcase.
*    endloop.
** Check if any new entries already exist in gt_outtab.
** At this point, lt_good_cells contains only lines with
** FIELDNAME = 'FLDATE'.
*    loop at lt_good_cells into ls_good.
*      l_flightdate = ls_good-value.      "flightdate, see above
*      read table gt_outtab with key
*                    carrid = g_carrid
*                    connid = g_connid
*                    fldate = l_flightdate
*                    transporting no fields.
*      if sy-subrc = 0.
** Check if this entry was deleted before, i.e. it is in the table
** of deleted rows. If so, the entry does not exist twice. The user
** has deleted a line and then reentered it.
*        l_reentered = space.
*        loop at pr_data_changed->mt_deleted_rows into l_del_row.
*          read table gt_outtab into ls_outtab index l_del_row-row_id.
*          if sy-subrc ne 0.
*            message i000(0k) with text-e01."Fehler beim Löschen
*          elseif
*                    ls_outtab-carrid eq g_carrid
*                and ls_outtab-connid eq g_connid
*                and ls_outtab-fldate eq ls_good-value.
*            l_reentered = 'X'.
*          endif.
*        endloop.
*        if l_reentered ne 'X'.
*          call method pr_data_changed->add_protocol_entry
*                         exporting
*              i_msgid = '0K' i_msgno = '000' i_msgty = 'E'
*              i_msgv1 = text-m01
*              i_fieldname = ls_good-fieldname
*              i_row_id = ls_good-row_id.
*          error_in_data = 'X'.
*        endif.
*      endif.
*    endloop.
** In this demo report you may prevent the selection
** of data by setting parameter 'p_ds'.
** If this is done, the next check is required:
*    if me->table_is_initial( ) eq 'X'.
*      call method get_cell_values
*           exporting row_id          = 1
*                     pr_data_changed = pr_data_changed
*           importing key             = ls_key.
*      select single * from sflight into ls_sflight
*                where carrid = ls_key-carrid
*                  and connid = ls_key-connid
*                  and fldate = ls_key-fldate.
*      if sy-subrc = 0.
*        call method pr_data_changed->add_protocol_entry
*                       exporting
*            i_msgid = '0K' i_msgno = '000' i_msgty = 'E'
*            i_msgv1 = text-m01
*            i_fieldname = 'FLDATE'
*            i_row_id = 1.
*        error_in_data = 'X'.
*      endif.
** flag initial_table is reset in method 'update_delta_tables'
*    endif.
endmethod.                    "check_double_entries
method update_delta_tables.
*    data: l_ins_row type lvc_s_moce,
*          l_del_row type lvc_s_moce,
*          ls_key type sflight_key,
*          ls_sflight type sflight,
*          ls_outtab like line of gt_outtab.
** §6.Use protocol attributes MT_DELETED_ROWS and MT_INSERTED_ROWS
**    to remember which lines where deleted or inserted. Save this
**    information in your internal tables.
** deleted rows
*    loop at pr_data_changed->mt_deleted_rows into l_del_row.
*      read table gt_outtab into ls_outtab index l_del_row-row_id.
*      if sy-subrc ne 0.
*        message i000(0k) with text-e01."Fehler beim Löschen
*      else.
*        move-corresponding ls_outtab to ls_sflight.
** It should no be possible that the same line is deleted twice,
** so we just add the new key line to 'deleted_rows'.
*        append ls_sflight to deleted_rows.
** If this line was inserted just before it is deleted:
*        delete me->inserted_rows
*             where carrid = ls_outtab-carrid
*             and   connid = ls_outtab-connid
*             and   fldate = ls_outtab-fldate.
*      endif.
*    endloop.
** inserted rows
** At this point ALV has not added new lines
** to gt_outtab, so you can not access their values
** by reading gt_outtab.
** Table MT_GOOD_CELLS holds new values that can be
** referenced using the ROW_ID.
*    if me->table_is_initial( ) eq 'X'.
** No flights were selected initially. This is the first new line.
*      call method get_cell_values
*            exporting row_id          = 1
*                      pr_data_changed = pr_data_changed
*            importing key             = ls_key.
*      append ls_key to inserted_rows.
*      call method me->set_table_is_not_initial.
*    endif.
*    loop at pr_data_changed->mt_inserted_rows into l_ins_row.
*      call method get_cell_values
*              exporting row_id          = l_ins_row-row_id
*                        pr_data_changed = pr_data_changed
*              importing key             = ls_key.
**      READ TABLE gt_outtab INTO ls_outtab INDEX l_ins_row-row_id.
** Just insert the new row regardless if the input is wrong
*      append ls_key to inserted_rows.
*    endloop.
endmethod.                    "update_delta_tables
method get_cell_values.
* get values of key cells of row ROW_ID
** CARRIER
*    call method pr_data_changed->get_cell_value
*          exporting
*                 i_row_id    = row_id
*                 i_fieldname = 'CARRID'
*               importing
*                 e_value = key-carrid.
*    if sy-subrc ne 0.
*      message i000(0k) with text-e02. "Fehler beim Einfügen
*    endif.
** CONNID
*    call method pr_data_changed->get_cell_value
*          exporting
*                 i_row_id    = row_id
*                 i_fieldname = 'CONNID'
*               importing
*                 e_value = key-connid.
*    if sy-subrc ne 0.
*      message i000(0k) with text-e02. "Fehler beim Einfügen
*    endif.
** FLDATE
*    call method pr_data_changed->get_cell_value
*          exporting
*                 i_row_id    = row_id
*                 i_fieldname = 'FLDATE'
*               importing
*                 e_value = key-fldate.
*    if sy-subrc ne 0.
*      message i000(0k) with text-e02. "Fehler beim Einfügen
*    endif.
endmethod.                    "get_cell_values
method perform_semantic_checks.
*    data: ls_good type lvc_s_modi,
*          l_planetype type s_planetye,
*          l_seatsmax type s_seatsmax.
*    loop at pr_data_changed->mt_good_cells into ls_good.
*      case ls_good-fieldname.
*        when 'PLANETYPE'.
*          call method pr_data_changed->get_cell_value
*             exporting
*               i_row_id = ls_good-row_id
*               i_fieldname = ls_good-fieldname
*             importing
*               e_value = l_planetype.
*          select single seatsmax from saplane into l_seatsmax
*                        where planetype = l_planetype.
*          if sy-subrc ne 0.
*            call method pr_data_changed->add_protocol_entry
*                            exporting
*                 i_msgid = '0K' i_msgno = '000' i_msgty = 'E'
*                 i_msgv1 = text-m02
*                 i_fieldname = ls_good-fieldname
*                 i_row_id = ls_good-row_id.
*            error_in_data = 'X'.
*          else.
*            call method pr_data_changed->modify_cell
*              exporting i_row_id    = ls_good-row_id
*                        i_fieldname = 'SEATSMAX'
*                        i_value     = l_seatsmax.
*          endif.
*      endcase.
*    endloop.
endmethod.                    "perform_semantic_checks
method get_inserted_rows.
*    inserted_rows = me->inserted_rows.
endmethod.                    "get_inserted_rows
method get_deleted_rows.
*    deleted_rows = me->deleted_rows.
endmethod.                    "get_deleted_rows
method refresh_delta_tables.
*    clear me->inserted_rows[].
*    clear me->deleted_rows[].
endmethod.                    "refresh_delta_tables
method set_table_is_initial.
*    initial_table = 'X'.
endmethod.                    "set_table_is_initial
method set_table_is_not_initial.
*    initial_table = space.
endmethod.                    "set_table_is_not_initial
method table_is_initial.
*    if initial_table = 'X'.
*      initial = 'X'.
*    else.
*      initial = space.
*    endif.
endmethod.                    "table_is_initial
endclass.                    "lcl_event_receiver IMPLEMENTATION
data: g_verifier type ref to lcl_event_receiver.
data: g_max type i value 100.
data: gs_layout type lvc_s_layo.
data: ok_code like sy-ucomm,
      save_ok like sy-ucomm.
parameters: p_ds type c as checkbox.   "delete selection
select-options s_carrid for sflight-carrid
                            no intervals no-extension default 'LH'.
select-options s_connid for sflight-connid
                           no intervals no-extension default '0400'.
start-of-selection.
g_carrid = s_carrid-low.
g_connid = s_connid-low.
* first check airline and connection
select single * from spfli into gs_spfli
                     where carrid = g_carrid
                     and connid = g_connid.
call screen 100.
*&      Module STATUS_0100 OUTPUT
*       text
module status_0100 output.
set pf-status 'MAIN100'.
set titlebar 'MAIN100'.
if g_custom_container is initial.
    perform create_and_init_alv changing gt_outtab[]
                                         gt_fieldcat.
endif.
endmodule.                 " STATUS_0100 OUTPUT
*&      Form create_and_init_alv
*       text
*      <--P_GT_OUTTAB[] text
*      <--P_GT_FIELDCAT text
form create_and_init_alv changing pt_outtab like gt_outtab[]
                                  pt_fieldcat type lvc_t_fcat.
data: lt_exclude type ui_functions.
create object g_custom_container
         exporting container_name = g_container.
create object g_grid
         exporting i_parent = g_custom_container.
* Create Objekt to verify input values.
* (This object is already needed in form SELECT_DATA).
create object g_verifier.
* SET HANDLER g_verifier->handle_data_changed FOR g_grid.
perform select_data changing pt_outtab[].
perform build_fieldcat changing pt_fieldcat.
perform exclude_tb_functions changing lt_exclude.
gs_layout-stylefname = 'CELLTAB'.
call method g_grid->set_table_for_first_display
    exporting
      it_toolbar_excluding = lt_exclude
      is_layout            = gs_layout
    changing
      it_fieldcatalog      = pt_fieldcat
      it_outtab            = pt_outtab[].
* Set editable cells to ready for input initially
call method g_grid->set_ready_for_input
    exporting
      i_ready_for_input = 1.
endform.                    " create_and_init_alv
*&      Form select_data
*       text
*      <--P_GT_OUTTAB text
form select_data changing pt_outtab like gt_outtab[].
data: lt_sflight type table of sflight,
        ls_sflight type sflight,
        ls_outtab like line of gt_outtab,
        l_index type i,
        ls_spfli type spfli,                                "#EC NEEDED
        lt_celltab type lvc_t_styl.
* Check parameter 'p_ds'=>optionally select no data
if p_ds is initial.
* Select data from sflight
    select * from sflight into table lt_sflight up to g_max rows
                     where carrid = g_carrid
                       and connid = g_connid.
endif.
if sy-subrc ne 0 or not p_ds is initial.
* no flights were found!
* We provide some default values for the first line that is entered:
    ls_outtab-carrid = g_carrid.
    ls_outtab-connid = g_connid.
    case g_carrid.
      when 'LH'.
        ls_outtab-currency = 'DEM'.
      when others.
        ls_outtab-currency = 'US'.
    endcase.
    ls_outtab-seatsocc = 0.
    ls_outtab-paymentsum = 0.
* set fields FLDATE, PRICE and PLANETYPE to editable
    perform fill_celltab using 'RW'
                         changing lt_celltab.
    insert lines of lt_celltab into table ls_outtab-celltab.
    append ls_outtab to pt_outtab.
* Tell Verify-Objekt that the table was initial
    call method g_verifier->set_table_is_initial.
else.
    call method g_verifier->set_table_is_not_initial.
* move corresponding fields from lt_sflight to gt_outtab
    loop at lt_sflight into ls_sflight.
      move-corresponding ls_sflight to ls_outtab.
      append ls_outtab to pt_outtab.
    endloop.
* §3.Set all cells of the table non-editable by using the style table.
    loop at pt_outtab into ls_outtab.
      l_index = sy-tabix.
      refresh lt_celltab.
      perform fill_celltab using 'RO'
                        changing lt_celltab.
* Copy your celltab to the celltab of the current row of gt_outtab.
      insert lines of lt_celltab into table ls_outtab-celltab.
      modify pt_outtab from ls_outtab index l_index.
    endloop.
endif.
endform.                               " select_data
*&      Form fill_celltab
*       text
*      -->VALUE(P_MODE) text
*      -->PT_CELLTAB     text
form fill_celltab using value(p_mode)
                  changing pt_celltab type lvc_t_styl.
data: ls_celltab type lvc_s_styl,
        l_mode type raw4.
* This forms sets the style of columns 'PRICE', FLDATE and PLANETYPE
* editable
if p_mode eq 'RW'.
    l_mode = cl_gui_alv_grid=>mc_style_enabled.
else.                                "p_mode eq 'RO'
    l_mode = cl_gui_alv_grid=>mc_style_disabled.
endif.
ls_celltab-fieldname = 'FLDATE'.
ls_celltab-style = l_mode.
insert ls_celltab into table pt_celltab.
ls_celltab-fieldname = 'PRICE'.
ls_celltab-style = l_mode.
insert ls_celltab into table pt_celltab.
ls_celltab-fieldname = 'PLANETYPE'.
ls_celltab-style = l_mode.
insert ls_celltab into table pt_celltab.
endform.                               " FILL_CELLTAB
*&      Form BUILD_FIELDCAT
*       text
*      <--P_GT_FIELDCAT text
form build_fieldcat changing pt_fieldcat type lvc_t_fcat.
data ls_fcat type lvc_s_fcat.
call function 'LVC_FIELDCATALOG_MERGE'
    exporting
      i_structure_name = 'SFLIGHT'
    changing
      ct_fieldcat      = pt_fieldcat.
loop at pt_fieldcat into ls_fcat.
    if    ls_fcat-fieldname eq 'PRICE'
       or ls_fcat-fieldname eq 'PLANETYPE'
       or ls_fcat-fieldname eq 'FLDATE'.
* §1.Set status of columns FLDATA, PRICE and PLANETYPE to editable.
*    Since all cells are set to non-editable (see step 3) the cells
*    of this columns will only be editable for new lines.
      ls_fcat-edit = 'X'.
* Field 'checktable' is set to avoid shortdumps that are caused
* by inconsistend data in check tables. You may comment this out
* when the test data of the flight model is consistent in your system.
      ls_fcat-checktable = '!'.        "do not check foreign keys
      modify pt_fieldcat from ls_fcat.
    elseif ls_fcat-fieldname = 'CARRID'
       or ls_fcat-fieldname = 'CONNID'
       or ls_fcat-fieldname = 'CURRENCY'.
* §2.Use field AUTO_VALUE of the fieldcatalog to preset values when new
*    lines are added.
      ls_fcat-auto_value = 'X'.
      ls_fcat-checktable = '!'.   "do not check foreign key relations
      modify pt_fieldcat from ls_fcat.
    endif.
endloop.
endform.                    "build_fieldcat
*&      Form exclude_tb_functions
*       text
*      <--P_LT_EXCLUDE text
form exclude_tb_functions changing pt_exclude type ui_functions.
data ls_exclude type ui_func.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_insert_row.
append ls_exclude to pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_undo.
append ls_exclude to pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_copy_row.
append ls_exclude to pt_exclude.
endform.                               " EXCLUDE_TB_FUNCTIONS
*&      Module USER_COMMAND_0100 INPUT
*       text
module user_command_0100 input.
save_ok = sy-ucomm.
clear ok_code.
case save_ok.
    when 'SAVE'.
*      perform save_data.
    when 'BACK'.
* §10.Unlock your database table.
*      perform unlock_sflight.
      leave to screen 0.
    when 'EXIT'.
      perform exit_program.
    when 'ADD'.
      perform add_line_item.
    when others.
*     do nothing
endcase.
endmodule.                 " USER_COMMAND_0100 INPUT
*       FORM EXIT_PROGRAM                                             *
form exit_program.
leave program.
endform.                    "exit_program
*&      Form ADD_LINE_ITEM
*       text
* --> p1        text
* <-- p2        text
form add_line_item .
data: lt_rows type lvc_t_row.
data: wa_rows type lvc_t_row with header line.
data: tabix type sy-tabix.
*&Find the row ( index ) number
call method g_grid->get_selected_rows
          importing et_index_rows = lt_rows.
call method cl_gui_cfw=>flush.
read table lt_rows into wa_rows index 1.
tabix = wa_rows-index .
insert gt_outtab index tabix.
*REFRESH_TABLE_DISPLAY
call method g_grid->refresh_table_display
* EXPORTING
*    IS_STABLE      =
*    I_SOFT_REFRESH =
* EXCEPTIONS
*    FINISHED       = 1
*    others         = 2
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    " ADD_LINE_ITEM
Thanks,
Chidanand

Loaded 3.6.3 on Mac with 10.5.8 - no longer get printer recognition. Pinter is there with metwork and prints with Windows XPPro

using mac10.5.8, since loading 3.6.3 can no longer access printer. Even without ff running. Pinter is a network unit that works with Windows fine. Can't even reload printer driver.
== This happened ==
Every time Firefox opened
== First time FF 3.6.3 loaded

It may tell me that you are seeing the "popular" complaint about the intermittent MM behavior. Do google searches for "skipping magic mouse" or similar wording and you will get lots of hits.
One suggestion which some have claimed works is to stick a little ball of aluminum foil between the batteries and their contacts. The theory behind this is that not all batteries are created equal in the sense that the positive contact is slightly higher in some makes and not the others and that the ones with a shorter contact actually break contact due to the battery moving slightly in its compartment. So the al foil is to take up the gap.
I personally cannot say this theory is valid one way or another. I use rechargeable Sanyo Eneloops and they seem ok.

Crystal Reports 2008 and printing with Zebra printer issue

Hello,
Since we have upgraded the reports from XI to 2008, the reports are not printing well in the Zebra printers.
The report gets shrunk to half the size.
Is there something that needs to be done after the upgrade?
Thanks in advance

Both, install it on your PC first and test. If all is well then build or use the various deployment packages available from our download site.
You may want to test this with a few reports also. Open the report and check off use Default printer and test other printer options. I don't know what options the QA team were using so it's best for you to test. If you don't have a Zebra printer ask one of your customers to do some testing for you.
According to Zebra Developers all their drivers are based on the same code so they should all work the same. Once you have one working they all should work using the same options.
Thank you
Don

Port Forwarding and Printing with Static IP Address

Hey there -
I am trying to setup a network printer that can be printed to from anywhere in the world. My organization has 5 static IP addresses given to us by our ISP. Four of those I have on computers, and one of them I have on my Linksys router (WRT54G v.8).
What I want to do is be able to setup a printer on my router that I can print to from anywhere I have an internet connection. My wireless router's static IP address is 74.172.54.XXX - The address on my network is 192.168.7.1 - I have a printer statically assigned the IP address 192.168.7.2 - and I have a port forwarding for port 70 to forward to 192.168.7.2
In theory, I would think that now I could print to 74.172.54.XXX:70 and have no problems. But that doesn't seem to be working. Even printing to 192.168.7.1:70 doesn't seem to work either.
Also, the printer has a web GUI interface that if I type http://192.168.7.1/ into my browser it comes up, so in theory I would think typing http://74.172.54.XXX:70 into my browser it should come up (but it doesn't nor does http://192.168.7.1:70).
Anybody got any suggestions? I tried to do a search about this, but ever Port Forwarding question seemed to deal with gaming (which I have no desire to do). Thanks!
I will include two screen snapshots of what I am talking about:
Thanks for any help.

Is the router setup to accept static connections?
I have my router set up to accept both, so from 192.168.1.100 to 192.168.1.192 the addresses are static the other addresses are given by DHCP.
If you do not define a range and the address your laptop has as static IP conflicts with the address given by DHCP your loose ... as in you get no address.
Set up of that feature may depend on your type of router but usually any decent router will have that capability ... read your manual for specifics about your unit.
Best of luck.
R.
Last edited by ralvez (2009-12-10 00:08:50)

EBiz 11i Integration and Printing with TOMCAT/COCOON

Similar Messages

Maybe you are looking for