Eclipse and Java EE 5

Hi all,
I'm going to develop an application based on Java EE 5.
I'd like to use webservices, EJB 3.0, GlassFish, Portlets and everything should be than connected with JBI, bussiness logic will be modeled with BPEL.
My question is which IDE would be better for me. I liked elipse for my JavaSE, Spring etc. development but I don't know the situation in JEE 5. Will be a problem to use these technologies with eclipse? Is eclipse (WTP?) ready for this project? With which plugins?
Thanks
P.S. I'm only deciding between eclipse and netbeans and I'm not interested in which IDE is little better but if eclipse is roughly on the same level with Java EE 5 and other technologies mentioned.

On 6/7/2010 12:26 PM, Bill Herbert wrote:
> Hi,
>
> I want to use Tomcat v6 with Eclipse. For installation, I'm following
> the tutorial
> " http://www.coreservelets.com/Apache-Tomcat-Tutorial/eclipse. html"
> (Most other installation guides I've read seem to follow the same steps)
>
> I installed Java EE 5 SDK, Tomcat 6.0.16 and Eclipse IDE for Java EE
> developers.
>
> In Eclipse I created a Tomcat server, but when I r click the server, I
> get a message "Port 80 required by Tomcat v6.o server is already in use."
> I rebooted and tried again before starting any other processes and got
> the same message.
> I disconnected my machine from the internet, used 'netstat' to see what
> process might be using Port 80, and observed 0.0.0.0:80 "Listening" but
> nothing "Established." Again tried to start the Tomcat server in
> Eclipse, but got the same Port 80 message.
>
> Any suggestions, before I go nuts?
>
> Thanks for any help,
> Bill
What do you mean by "I r click the server"? Do you mean in the Servers
view and choose Run or Debug?
Normally, Tomcat comes ready to use on port 8080. You can change this by
doing the following:
1) Expand Server in the Project Explorer view.
2) Exapnd Tomcat v6.0 Server at localhost-config
3) Double-click server.xml
4) Search for 8080
5) Verify that you have:
<Connector connectionTimeout="20000" port="8080" protocol="HTTP/1.1"
redirectPort="8443" />
This should mean that Tomcat is using 8080 not 80. If other, change to
8080 and try again.
(80 is usually what your browser is using.)

Similar Messages

Eclipse 3.4 and Java 6 compatibility

Hi All,
I have a tomcat plugin inside Eclipse 3.4.2. Recently I upgraded from Java 5 to Java 6. When I try to start Tomcat from Eclipse,I get the following error:
Error occurred during initialization of VM
java.lang.UnsatisfiedLinkError: java.lang.Float.floatToIntBits(F)I
     at java.lang.Float.floatToIntBits(Native Method)
     at java.lang.Math.<clinit>(Math.java:801)
     at sun.net.www.ParseUtil.lowMask(ParseUtil.java:512)
     at sun.net.www.ParseUtil.<clinit>(ParseUtil.java:559)
     at sun.misc.Launcher.getFileURL(Launcher.java:388)
     at sun.misc.Launcher$ExtClassLoader.getExtURLs(Launcher.java:165)
     at sun.misc.Launcher$ExtClassLoader.<init>(Launcher.java:137)
     at sun.misc.Launcher$ExtClassLoader$1.run(Launcher.java:121)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.misc.Launcher$ExtClassLoader.getExtClassLoader(Launcher.java:118)
     at sun.misc.Launcher.<init>(Launcher.java:51)
     at sun.misc.Launcher.<clinit>(Launcher.java:39)
     at java.lang.ClassLoader.initSystemClassLoader(ClassLoader.java:1304)
     at java.lang.ClassLoader.getSystemClassLoader(ClassLoader.java:1286)
Kindly suggest what needs to be done? If I am posting it in a wrong forum please suggest me the right one too.
I would like to know if Eclipse 3.4 and Java 6 are compatible or not.
Thanks in advance.

ShubhaPradeep wrote:
I have a tomcat plugin inside Eclipse 3.4.2. Recently I upgraded from Java 5 to Java 6. When I try to start Tomcat from Eclipse,I get
Error occurred during initialization of VM
java.lang.UnsatisfiedLinkError: java.lang.Float.floatToIntBits(F)IAre we talking 64-bit Linux?
I had issues launching eclipse on CentOS 5 64-bit and Sun JDK 1.6,
resolved by launching eclipse with the -vm option specifying Sun JDK 1.5 java.
[https://www.centos.org/modules/newbb/viewtopic.php?post_id=95784&topic_id=11661]

Flex 3 and Java - Integrated Development on Eclipse

I am new to flex as well as to eclipse. I have downloaded
Adobe Flex Builder 3.0 and installed it. I want to use java at the
back-end, but I don't have Java perspective option in eclipse.
Therefore, I am currently using 2 IDE(s), one is
flex-builder, and other is Eclipse for Web tool platform
(eclipse-jee-europa-winter-win32.zip).
Is there anyway that I can benefit integrated development of
Flex and java using same IDE?

I wouldn't try it really... it's not worth the issues you'd
probably run into and the work of getting it setup, if it's even
possible. I just run Eclipse and FB separate. If you have a gig of
ram you should be fine doing this I think.
If you *really* want to get rid of one, you can use the Flex
plugin for Eclipse, but I've heard people complain about it not
playing nice with Java.

J2me and java card, need help to communicate

we are trying to put together a reader to read smartcards using j2me and we figure that it would be easiest if we could develop it to work with java cards rather than standard smart cards, the problem is we get garbage when we communicate to it, the chip sends us crap, any suggestions what might be wrong, any calls we might be missing, has anyone worked with j2me and java cards or smart cards, any help would be appreciated.
einar

.... reader app and the ME behind it .... smells like mobile ....
First of all - if you want to have one mobile application running on this just make sure that whatever is written in ME can use drivers from the reader chip ....
Workin on the PC is something completely different. There was one good example how to develop one host application in Java provided with the JCOP tools long ago ... I don't know if this is now in the new Eclipse tools.
But - there was a small API provided that can give you good hints what to do - and - once you have it on the reader side - you can easily integrate ME methods with this ...

Crystal Reports for Eclipse and CR2008

SQL-Server 2005
CR 2008, Ver.12.0.0.683
Crystal Reports for Eclipse Plug-in Details:
all Plug-in-files from Business Objects have the Versions 1.0.4.v1094 or 11.8.0.v20060727 except "CR for Eclipse Dev.Guide": Ver. 1.0.0.v1094
I created a report with CR 2008 and load this report with eclipse. A preview in CR and eclipse is running perfect.
When I bind this report to a jsp I get the error "Es wurde keine Rowsetspalte für das SQL-Ausdrucksfeld "strRefNo" gefunden", in english
"no rowset-column for sql-statement "strRefNo""
General this kind of SQL-statement is not working. This statement is a function which needs first a value from the database.
When this value is fixed in the statement, the report is running in the jsp otherwise I get the error.
When I delete this statement in eclispe, save this report, redo my delete and save the report again, the report is running with jsp!
May be, there is a version conflict between CR and eclipse.
I have to create the reports in CR2008 but I can not save the report in CR2008 to an older version.
Is there a newer version for eclipse, which works with CR2008? I could not find any other version.
Do you have other ideas?
Thanks!
Jens

Hi Bryan,
thank you for your good informations.
I have downloaded the complete new eclipse and I don't get this error anymore.
But in the next step, I tried a report with subreports. This is complete not working in Eclipse. When I load this report to Eclipse Ican see and click into the subreports. Each subreport is working in Preview, but the whole reports does not work (black screen), I get the error
eclipse.buildId=M20080911-1700
java.version=1.6.0_11
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=de_DE
Command-line arguments: -os win32 -ws win32 -arch x86
Error
Fri Feb 06 08:13:34 CET 2009
Unknown Error (java.lang.NullPointerException)
Info
Fri Feb 06 08:13:34 CET 2009
Plug-in Info: Business Objects, an SAP company - 12.2.200.r454
java.lang.NullPointerException
     at com.crystaldecisions.reports.queryengine.QueryInfo.wF(Unknown Source)
     at com.crystaldecisions.reports.datafoundation.DFQuery.if(Unknown Source)
     at com.crystaldecisions.reports.datafoundation.DFQuery.a(Unknown Source)
     at com.crystaldecisions.reports.datafoundation.DFQuery.int(Unknown Source)
     at com.crystaldecisions.reports.datalayer.a.do(Unknown Source)
     at com.crystaldecisions.reports.dataengine.m.l(Unknown Source)
     at com.crystaldecisions.reports.dataengine.m.b(Unknown Source)
     at com.crystaldecisions.reports.dataengine.j.b(Unknown Source)
     at com.crystaldecisions.reports.dataengine.m.o(Unknown Source)
     at com.crystaldecisions.reports.dataengine.m.a(Unknown Source)
     at com.crystaldecisions.reports.dataengine.ContextNode.a(Unknown Source)
     at com.crystaldecisions.reports.dataengine.ContextNode.a(Unknown Source)
     at com.crystaldecisions.reports.dataengine.j.case(Unknown Source)
     at com.crystaldecisions.reports.dataengine.h.<init>(Unknown Source)
     at com.crystaldecisions.reports.dataengine.DataContext.a(Unknown Source)
     at com.crystaldecisions.reports.dataengine.DataProcessor2.a(Unknown Source)
     at com.crystaldecisions.reports.dataengine.DataProcessor2.a(Unknown Source)
     at com.crystaldecisions.reports.dataengine.DataProcessor2.new(Unknown Source)
     at com.crystaldecisions.reports.dataengine.DataProcessor2.try(Unknown Source)
     at com.crystaldecisions.reports.dataengine.DataProcessor2.int(Unknown Source)
     at com.crystaldecisions.reports.dataengine.DataProcessor2.I(Unknown Source)
     at com.crystaldecisions.reports.formatter.formatter.objectformatter.ObjectFormatter.fm(Unknown Source)
     at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.if(Unknown Source)
     at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.a(Unknown Source)
     at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.Y(Unknown Source)
     at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.moveToPageN(Unknown Source)
     at com.crystaldecisions.reports.formatter.formatter.lightmodel.FCMPageFormatter.goToPage(Unknown Source)
     at com.businessobjects.crystalreports.designer.core.elements.formatted.MultiPageModel.B(Unknown Source)
     at com.businessobjects.crystalreports.designer.core.elements.formatted.MultiPageModel.A(Unknown Source)
     at com.businessobjects.crystalreports.designer.core.elements.formatted.FormattedPages$2.A(Unknown Source)
     at com.businessobjects.crystalreports.designer.core.elements.formatted.FormattedPages$2.call(Unknown Source)
     at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing.A(Unknown Source)
     at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing.syncExecute(Unknown Source)
     at com.businessobjects.crystalreports.designer.core.elements.formatted.FormattedPages.create(Unknown Source)
     at com.businessobjects.crystalreports.designer.core.elements.formatted.FormattedDocumentModeller.getValidFormattedPages(Unknown Source)
     at com.businessobjects.crystalreports.designer.core.elements.formatted.FormattedDocumentModeller$3.doWork(Unknown Source)
     at com.businessobjects.crystalreports.designer.core.util.thread.AbstractCancellableRunnable.run(Unknown Source)
     at com.businessobjects.crystalreports.designer.core.util.thread.PriorityTask.run(Unknown Source)
     at com.businessobjects.crystalreports.designer.core.util.thread.PriorityCompoundCancellableRunnable.runSubtask(Unknown Source)
     at com.businessobjects.crystalreports.designer.core.util.thread.PriorityProgressAwareRunnable.runSubtask(Unknown Source)
     at com.businessobjects.crystalreports.designer.core.util.thread.PriorityCompoundCancellableRunnable.doWork(Unknown Source)
     at com.businessobjects.crystalreports.designer.core.util.thread.AbstractCancellableRunnable.run(Unknown Source)
     at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing$_B.run(Unknown Source)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Any other good idea?
Thanks in advance.
Regards
Jens
Edited by: Jens Kutsche on Feb 6, 2009 8:27 AM
Info
Fri Feb 06 08:13:34 CET 2009
Plug-in Info: Business Objects, an SAP company - 12.2.200.r454

Cannot make .war file using tomcat with eclipse and ant

i have made all necesary configuration for deploying application using eclipse and ant for the tomcat server.
when i start the server by clicking the tomcat icon on eclipse toolbar, the message is prompted that "missing application web.xml and using defaults". i have placed the web.xml file in the web/WEB-INF directory of the source project directory.
also when i use ant by right-clicking on the build.xml file and choose Run as ant.. the process creates a desired .war file in webapps folder of the tomcat server but that war file does not works.
where is the error i cannot figure out.
am attaching the code of build.xml for reference.
please help.
build.xml:-
<project name="BecilCTI" default="compile" basedir=".">
<property file="build.properties"/>
<property file="${user.home}/build.properties"/>
<property name="app.name" value="BecilCTI"/>
<property name="app.path" value="/${app.name}"/>
<property name="app.version" value="0.1-dev"/>
<property name="build.home" value="${basedir}/build"/>
<property name="catalina.home" value="c:/Tomcat_5.5"/> 
<property name="dist.home" value="${basedir}/dist"/>
<property name="docs.home" value="${basedir}/docs"/>
<property name="manager.url" value="http://localhost:8080/manager"/>
<property name="src.home" value="${basedir}/src"/>
<property name="web.home" value="${basedir}/web"/>
<property name="compile.debug" value="true"/>
<property name="compile.deprecation" value="false"/>
<property name="compile.optimize" value="true"/>

<path id="compile.classpath">

<pathelement location="${catalina.home}/common/classes"/>
<fileset dir="${catalina.home}/common/endorsed">
<include name="*.jar"/>
</fileset>
<fileset dir="${catalina.home}/common/lib">
<include name="*.jar"/>
</fileset>
<pathelement location="${catalina.home}/shared/classes"/>
<fileset dir="${catalina.home}/shared/lib">
<include name="*.jar"/>
</fileset>
</path>
<target name="all" depends="clean,compile"
description="Clean build and dist directories, then compile"/>
<target name="clean"
description="Delete old build and dist directories">
<echo message="Cleaning all dirs."/>
<delete dir="${build.home}"/>
<delete dir="${dist.home}"/>
</target>
<target name="compile" depends="prepare"
description="Compile Java sources">

<mkdir dir="${build.home}/WEB-INF/classes"/>
<javac srcdir="${src.home}"
destdir="${build.home}/WEB-INF/classes"
debug="${compile.debug}"
deprecation="${compile.deprecation}"
optimize="${compile.optimize}">
<classpath refid="compile.classpath"/>
</javac>

<copy todir="${build.home}/WEB-INF/classes">
<fileset dir="${src.home}" excludes="**/*.java"/>
</copy>
</target>
<target name="dist" depends="compile"
description="Create binary distribution">


<jar jarfile="${catalina.home}/webapps/${app.name}.war"
basedir="${build.home}"/>

</target>
<target name="install" depends="compile"
description="Install application to servlet container">
<deploy url="${manager.url}"
username="${manager.username}"
password="${manager.password}"
path="${app.path}"
localWar="file://${build.home}"/>
</target>
<target name="list"
description="List installed applications on servlet container">
<list url="${manager.url}"
username="${manager.username}"
password="${manager.password}"/>
</target>
<target name="prepare">

<mkdir dir="${build.home}"/>
<mkdir dir="${build.home}/WEB-INF"/>
<mkdir dir="${build.home}/WEB-INF/classes"/>

<copy todir="${build.home}">
<fileset dir="${web.home}"/>
</copy>
<mkdir dir="${build.home}/WEB-INF/lib"/>
</target>
<target name="reload" depends="compile"
description="Reload application on servlet container">
<reload url="${manager.url}"
username="${manager.username}"
password="${manager.password}"
path="${app.path}"/>
</target>
<target name="remove"
description="Remove application on servlet container">
<undeploy url="${manager.url}"
username="${manager.username}"
password="${manager.password}"
path="${app.path}"/>
</target>
</project>

So is context.xml actually overwriting the settings found in server.xml?I think so. The way I understand it is the the context.xml file saves you from having to edit server.xml. It is preferred for each web app to do its own config, rather than lumping them all together in server.xml.
And what would be the best way to create the war file? IAt its heart, a WAR is just a zip file with its contents laid out in according to the specification of a web application directory structure.
So the simplest way to make a war file is to zip up your directory structure with a tool like winzip, and rename it to be myApp.war.
Regarding ant, I would recommend you take a look through [url http://jakarta.apache.org/tomcat/tomcat-4.1-doc/appdev/index.html
]this tutorial. It explains the basics of website layout, configuration and deployment.
On [url http://jakarta.apache.org/tomcat/tomcat-4.1-doc/appdev/source.html] this page in particular, it includes a link to a basic ant file that you can use as a starting point.
Cheers,
evnafets

HTMLB and Java EE 5 Sneak Preview?

Hello *,
I recently installed the Java EE Sneak Preview. I'd like to develop some JSP that still use HTMLB. But I could not find any information, whether the Java EE Sneak Preview includes or even supports HTMLB, Do you have any information about that? I already searched the plugins folder of the SAP NetWeaver Developer Studio, that ships with the Java EE Sneak Preview. But I couldn't find a "htmlb.jar" or something like that. Is there any documentation about this?
Kind regards, Lars

Hi Lars!
Actually the Java EE 5 Edition IDE does only contain Java EE 5 standard tools that are based on Eclipse's WTP. There are also a few administrative SAP specific plugins bundled: MaxDB client plugins, SAP MMC for Eclipse and a Deploy View for SAP specific deployment.
Best Regards,
Robin

Question concerning Eclipse and Tomcat Plugin and JSP

I have a Tomcat-Project that I am working on in Eclipse and quite a few external JARs. Everything works fine, when I run my Test class within my project (in Eclipse). But as soon, as I am trying to call the jsp in my browser I get Exceptions: "java.lang.NoClassDefFoundError: org/apache/log4j/Logger" for example, which tells me that in the browser it can't find the JARs... I'm guessing something's wrong with the classpath but I was thinking that Eclipse would handle those things for me...
I've added the JARs to my project via Eclipse (Properties -> Java Build Path -> Libraries -> Add external JARs). And I've created a subdirectory for my jsp files and allowed my project to update the .xml file for the settings and all... Do I need to do anything else? What have I done wrong so far, have I forgotten to do?

I solved the problem...

JSTL 1.1.2, TOMCAT 5.5, JDK 5, Eclipse and Problems

I have been having trouble loading the JSTL library (standard.jar & jstl.jar)
I'm using Eclipse 3.0.2 to do my development work on my JSP pages. So normally I will just create my Tomcat(5.5 on JDK5.0) project using Sysdeo(tm) plugin in its default directory (C:\eclipse\workspace\mytomcatproject).
Then I would begin creating my JSPs and use JSTL(1.1.2) for my development. I'd put those standard.jar/jstl.jar into /WEB-INF/lib as recommended.
The problem is I can't seem to get JSTL library working, even I tried out copy and pasting the example code into my pages.
I have :
<%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %>
<%@ taglib prefix="fn" uri="http://java.sun.com/jsp/jstl/functions" %>
... //some code
${fn:escapeXml(param["myreq"])} will show out in the JSP exactly "${fn:escapeXml(param["myreq"])}" without processing. Although no runtime errors comes out (meaning the TOMCAT successfully loaded the library) but seems that the taglib is not working!!!
I did some experiments:
Experiment 1 :-
<%@ taglib prefix="c" uri="http://java.sun.com/jstl/core" %>
(notice the uri, its without /jsp)
and it works for /core taglib, but not the /functions taglib. Meaning somewhere in the TOMCAT library it load the older 1.0 version of JSTL.
When I try using the /functions taglib
<%@ taglib prefix="fn" uri="http://java.sun.com/jstl/functions" %>
TOMCAT will complaint about the non-existence of this JSTL.
Experiment 2 :-
I tried to copy all the JSTL tld into my /WEB-INF/tld and and change my web.xml to include the tld location by using <jsp-config><taglib>.
Doesn't work as well!!! The taglib just didn't get process.
Experiment 3 :-
I tried to modify the <Context> in server.xml to include tldNameAware and tldValidation to TRUE.
Not Working as well!!!
Experiment 4 :-
I comment out the <my_tomcat_home>/conf/server.xml <Context> (the one that Eclipse created for my Tomcat project) and directly paste my project directory into <my_tomcat_home>/webapps and restarted my TOMCAT.
IT WORKS!!!
So does JSTL 1.1.2 only works in TOMCAT webapps home? Seems that TOMCAT only load the /WEB-INF/lib when the project is in its webapps, but when the project is outside of the webapps dir, it seems doesn't process the JSTL lib.
Any idea how to make it work outside the Tomcat webapps cause I try to encourage my team to use Eclipse and CVS.

The probable cause of the issue is your web.xml file.
If your web.xml file is declared as being servlet version 2.3, then it disables the JSTL expression language (EL) by default.
ie if you have this:
<?xml version="1.0"?>
<!DOCTYPE web-app PUBLIC
   "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
   "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>It should change to be this:
<?xml version="1.0" encoding="ISO-8859-1"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
    version="2.4">Undo all of that hacking you did through the config files.
JSTL needs no tld files, and no entries in web.xml to make it work.
Hope this helps,
evnafets

New in Oracle and Java

I used Sql Server and .Net for developing application to now. I switch to Oracle and Java recently. I have installed Oracle 11g. What I need to start developing aoolication with Java and Oracle?
Has Oracle a graphical interface like MS Sql Server? how can I install them? What Developing Environment You suggest for Java? I am familiar with eclipse.

user987274 wrote:
I used Sql Server and .Net for developing application to now. Which means 1 year or 5?
I switch to Oracle and Java recently. I have installed Oracle 11g. What I need to start developing aoolication with Java and Oracle? Starting basics.
1. Learn basics of java
2. Learn basics of Oracle
3. Learn JDBC which allows you to code in java and talk to Oracle.
Do not attempt step 3 until you have complete 1 and 2.
Has Oracle a graphical interface like MS Sql Server? That would be a Oracle question rather than a java question. There are other forums on this site specific to Oracle.
Myself I just use sqlplus.
how can I install them? Huh? Just like you install anything else.
1. Acquire appropriate software
2. Read documentation
3. Install
4. Look for post install options that might be relevant.
What Developing Environment You suggest for Java? I am familiar with eclipse.I presume that you mean that you know eclipse exists for java rather than that you have used it before.
Since you are probably used to using Visual Studio, then you probably want an IDE. Eclipse will suffice for that.

The amendment that I do not appear (so if I close Eclipse and re-enter)

I'm using Eclipse Europa + Java + BlazeDS + server Tomcat, but whenever I compile, does not show the amendment.
To show the amendment, I always have to close Eclipse and come again ...
what will be? any configuration in Tomcat server?
I thank those who help: THANK YOU!
Gilberto

It has always been very basic to always maintain a backup copy of your computer for just such an occasion. Use your backup to put everything on the new computer.

Not able to recognize any video/audio devices using jmf and java soun

Hi ,
I need one help from your side.
Here I am expecting some clarifications from you. Before that let you my environement.
My working environment :
Eclipse tool and added jmf jar to my project I did not do any thing more.
If any thing I need to do just let me know. My target platform is MAC & UBUNTU.
Please bare with my questions.
1) I am not able to recognize any video/audio devices using jmf and java sound APIs on My system.
( I checked with the app mentioned in the http://www.java-forums.org/new-java/11201-jmf-cannot-connect-device.html )
Do we need any administrives rights for our working PC.
What is the procedure/ setup I need to follow from a java application to enable particular audio/video device since I dont about end-user system setup right.
If possible send some sample code to recognize /r detect audio device ( voice input ). It should run on both MAC and UBUNTU.
2) I run the one sample audio recording application of this link (http://www.jsresources.org/examples/SimpleAudioRecorder.java.html) which is provided by YOU.
I got output audio file and able to hear voice on UBUNTU system but not able to hear voice on MAC system.
I heared that default line in ( audio setup of the sys) is wont take any voice data on MAC.Why I made this stmt means we are getting false when using isSupported methods of JAVA SOUND API.
( like for TragetdataLine ...i,e, all ports are getting false)
I have one sample audio recording app implemented by QUICKTIME API. In this case also he taking audio ftom device only using quicetime API.
With that we are able to record and hear audio ( voice input --> not line in , external device we added some thing like SSB...)
3) In case of Video capturing DataSource, Streams are implemented by PullBufferDataSource , PullBufferStream intefaces used.
In case of Audio capturing DataSource, Streams are implemented by PushBufferDataSource, PushBufferStream intefaces used.
Can you explain the reasons ? I gone through API but i am not clear.
HOPE I WILL BE CLARIFIED EVERY THING FROM YOU.
Thanks
RamaRao.G

Hi ,
I need one help from your side.
Here I am expecting some clarifications from you. Before that let you my environement.
My working environment :
Eclipse tool and added jmf jar to my project I did not do any thing more.
If any thing I need to do just let me know. My target platform is MAC & UBUNTU.
Please bare with my questions.
1) I am not able to recognize any video/audio devices using jmf and java sound APIs on My system.
( I checked with the app mentioned in the http://www.java-forums.org/new-java/11201-jmf-cannot-connect-device.html )
Do we need any administrives rights for our working PC.
What is the procedure/ setup I need to follow from a java application to enable particular audio/video device since I dont about end-user system setup right.
If possible send some sample code to recognize /r detect audio device ( voice input ). It should run on both MAC and UBUNTU.
2) I run the one sample audio recording application of this link (http://www.jsresources.org/examples/SimpleAudioRecorder.java.html) which is provided by YOU.
I got output audio file and able to hear voice on UBUNTU system but not able to hear voice on MAC system.
I heared that default line in ( audio setup of the sys) is wont take any voice data on MAC.Why I made this stmt means we are getting false when using isSupported methods of JAVA SOUND API.
( like for TragetdataLine ...i,e, all ports are getting false)
I have one sample audio recording app implemented by QUICKTIME API. In this case also he taking audio ftom device only using quicetime API.
With that we are able to record and hear audio ( voice input --> not line in , external device we added some thing like SSB...)
3) In case of Video capturing DataSource, Streams are implemented by PullBufferDataSource , PullBufferStream intefaces used.
In case of Audio capturing DataSource, Streams are implemented by PushBufferDataSource, PushBufferStream intefaces used.
Can you explain the reasons ? I gone through API but i am not clear.
HOPE I WILL BE CLARIFIED EVERY THING FROM YOU.
Thanks
RamaRao.G

Eclipse for java - ToolBox plug-in

Peace be upon you:-
I need a FREE effective toolbox and form designer for Eclipse for java
I am using java Eclipse 3.4.1 (not Java EE)
Thank you in advance

Repost in a GUI forum. Note that you already tried here.

Eclipse and Classpath Errors

I have been writing some small applications within Eclipse and they run fine within eclipse; however, when I go and export these projects and try to run the JAR file that has been created, I am getting classpath errors.
At the following link https://cms.psu.edu/AngelUploads/Files/buk110/huh.jpg Is a screenshot of my Java Build Path Screen.
Am I doing something wrong? Any help would be appreciated...
Thanks

Problems still are occuring for me. However, I believe I am getting closer to what I need to do.
I have exported the project to a jar file into a folder I've called test. In this "test" folder I've also created a folder called "jars" which consists of all of my external jar files.
I've then edited the manifest file as follows
Manifest-Version: 1.0
Main-Class: keyword_listing
Class-Path: jars/i-text-1.3.jar jars/junit-3.8.1.jar jars/log4j-1.2.9.jar jars/tm-extractors-0.4.jarBut I still get the errors as before. Am I totally going in the wrong direction or am I missing something really simple?

Building a best practice web application using ColdFusion and Jave EE

I've been tasked with rewriting a software using ColdFusion. I cannot seem to find a lot of information on best practice development in ColdFusion. I am an experience Java developer who has never used ColdFusion before. I want to build this application using a synergy of ColdFusion and Java EE technologies. Can someone recommend me a book that outlines how to developer in ColdFusion? Ideally this book assumes the reader is an experienced developer with no exposure to ColdFusion. Ideally the methods outlined in the book are still "best practice" methods.

jaisheela wrote:
Hello Friends,
I am also in the same situation.
I am a building a new web application using JSF and AJAX.
Requirement is I need to use IBM version of DOJO and JSF but I need to develop the whole application using Eclipse 3.3,2 and Tomcat 5.5.
With IBM version of DOJO and JSF, will Eclipse and Tomcat help to speed up the development or do you suggest me to go for Rational Application Developer and WebSphere Application Server.
If I need to go with RAD and WAS, then I am new to RAD and WAS, is it easy to use RAD and WAS for this kind of application and implement web applicaiton fast.
Any feedback will be great help.Those don't sound like requirements of the system to me. They sound more like someone wants to improve their CV/resume
From what I've read recently, if it's just fast you want, look at Ruby on Rails

Eclipse and Java EE 5

Similar Messages

Maybe you are looking for