Edge Server Certficate does not match any of the supplied FQDNs

I'm having issues with a merged OCS 2007 R2 and Lync 2010 topology. I get a periodic event indicating there are Web conference connection issues betwen the Lync FEs and the OCS 2007 R2 Edge servers. Three times a minute the Edge server tries to connect to
the FE pool and the following events are generated:
Event ID: 41026
Lost connection to all Web Conferencing Edge Services
Event ID: 41024
Lost connection to all Web Conferencing Edge Services
Investigations show that IPv6 can be tha cause of this issue, but I don't think that is the case here. When I dig into the logs I see the following on the FE servers:
Certificate did not match any of the supplied fqdns Returned HRESULT=800B0109
This seems to be saying that the FE has a prequalified list of Edge server it can talk to and this certificate FQDN isn't on the list. I know you add an authorised list of FE servers to the Edge server, but I'm not aware of anywhere you add the edge
server FQDNs to the FEs other than for federation and media paths.
The certificate associated with the internal Edge interface is from a public provider and hence there is an Entrust chain to put in place on the edge server.
Jed

OK, whilst writing up the post it triggered me to go and check whether the FE server actaully trusts the certificate from the Edge server. I tried importing the certificate chain tied to the internal interface of the Edge server and placing it in the stores:
Personal (computer): Edge certificate
Intermediate Certificate Authorities (computer): PKI Provide intermediate certificate
Trusted Root certificate Authorities (computer): PKI provider root certificate
This immediatley fixed my issue. So, the event message is misleading as it doesn't say it doesn't trust the certificate but that is the root cause of my issues.
I completed this task on all my servers and on one server I noticed the issue was solved as soon as I imported the Edge certificate, it didn't need the intermediate or root certificate at all which surprised me. I repeated another test just pulling in the
root and intermediate certificate and that also fixed the issue. So, you can fix the prolem in two ways:
1) Import Edge certificate to personal computer store
2) Import Root and Intermediate to the appropriate stores
Jed

Similar Messages

Method 'publishCatalog' does not match any of the valid signatures for mess

When I run my client, I get "Method 'publishCatalog' does not match any of the valid signatures for message-style service methods" I know that it means that my web service method should conform to one of those 4 methods (http://ws.apache.org/axis/java/user-guide.html#ServiceStylesRPCDocumentWrappedAndMessage), and I made it conform, yet I still get that error.
Here's my Service and Client code:
import org.w3c.dom.Element;
import org.apache.axis.client.Service;
import org.apache.axis.client.Call;
import org.apache.axis.message.SOAPBodyElement;
import org.apache.axis.utils.XMLUtils;
import java.io.File;
import java.io.FileInputStream;
import java.net.URL;
import java.util.Vector;
public class CatalogPublisherServiceClient {
     public static void main(String[] args) throws Exception{
          String endpointURL="http://localhost:8080/axis/services/CatalogPublisherService";
          org.apache.axis.client.Service service = new Service();
          Call call = (Call)service.createCall();
          call.setTargetEndpointAddress(new URL(endpointURL));
          SOAPBodyElement[] reqSOAPBodyElements = new SOAPBodyElement[1];
          File catalogFile = new File("catalog.xml");
          FileInputStream fis = new FileInputStream(catalogFile);
          reqSOAPBodyElements[0] = new SOAPBodyElement(XMLUtils.newDocument(fis).getDocumentElement());
          SOAPBodyElement[] resSOAPBodyElements = (SOAPBodyElement[]) call.invoke(reqSOAPBodyElements);
          SOAPBodyElement resSOAPBodyElement = null;
          for(int i=0; i<resSOAPBodyElements.length; i++){
               resSOAPBodyElement = (SOAPBodyElement)resSOAPBodyElements;
               System.out.println(XMLUtils.ElementToString(resSOAPBodyElement.getAsDOM()));
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.soap.MessageFactory;
import javax.xml.soap.SOAPMessage;
import org.w3c.dom.Document;
import org.w3c.dom.Element;
import org.w3c.dom.NodeList;
import org.w3c.dom.Node;
import org.w3c.dom.Text;
import java.util.Vector;
import java.util.Date;
import java.text.SimpleDateFormat;
import org.apache.axis.MessageContext;
import org.apache.axis.utils.XMLUtils;
import org.apache.axis.message.SOAPBodyElement;
public class CatalogPublisherService {
     public SOAPBodyElement[] publishCatalog (SOAPBodyElement[] soapBodyElements) throws Exception {
          Element soapBody = (Element)soapBodyElements[0];
          NodeList productList = soapBody.getElementsByTagName ("PRODUCT");
     int productCount = productList.getLength();
     DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
     factory.setNamespaceAware(true);
     DocumentBuilder builder = factory.newDocumentBuilder();
     Document responseDoc = builder.newDocument();
     Element resRoot = responseDoc.createElementNS("http://www.axis03.ws", "CATALOGUPDATE");
     resRoot.setPrefix("CU");
     Element itemCount = responseDoc.createElement("ITEMCOUNT");
     Text itemCountText = responseDoc.createTextNode (String.valueOf(productCount));
     Element dateReceived = responseDoc.createElement("DATERECEIVED");
     SimpleDateFormat sdf = new SimpleDateFormat("MM/dd/yyyy");
     String date = sdf.format(new Date());
     Text dateReceivedText = responseDoc.createTextNode(date);
     //Append the child elements appropriately
     resRoot.appendChild(itemCount);
     itemCount.appendChild(itemCountText);
     resRoot.appendChild(dateReceived);
     dateReceived.appendChild(dateReceivedText);
     SOAPMessage message=null;
     MessageFactory msgFactory = MessageFactory.newInstance();
     message = msgFactory.createMessage();
     SOAPBodyElement[] result = new SOAPBodyElement[1];
     result[0] = new SOAPBodyElement(resRoot);
     return(result);

That's a really helpful answer and not smug at all, thanks Carey.
I just downloaded a DVD image from my university's MSDN Academic Alliance program, named "Microsoft
Windows 7 with Service Pack 1 Debug/Checked Build 64-bit (English)", which I wanted to use to install over an existing 32-bit version. I thought the install screen was giving this weird unskippable error described in the OP before I even entered
a key because the 32-bit key I had used on the HDD was somehow interpreted to be used in an upgrade, but no. Even after I wiped the hard drive, this error persisted.
Guess I'll go Google some more on how to install my legit copy of Windows, because this self-serving shit sure isn't helping.
edit: IF YOU GOOGLED THIS AND ARE STILL LOOKING FOR YOUR ANSWER, CHECK HERE:
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install/the-product-key-entered-does-not-match-any-of-the/47e6f575-5792-404b-9b7f-2065bdb91011

The product key entered does not match any of the Windows images available for installation. Enter a different product key.

how do you manage to install windows 7 when the message on the screen is "The product key entered does not match any of the Windows images available for installation. Enter a different product key. "

That's a really helpful answer and not smug at all, thanks Carey.
I just downloaded a DVD image from my university's MSDN Academic Alliance program, named "Microsoft
Windows 7 with Service Pack 1 Debug/Checked Build 64-bit (English)", which I wanted to use to install over an existing 32-bit version. I thought the install screen was giving this weird unskippable error described in the OP before I even entered
a key because the 32-bit key I had used on the HDD was somehow interpreted to be used in an upgrade, but no. Even after I wiped the hard drive, this error persisted.
Guess I'll go Google some more on how to install my legit copy of Windows, because this self-serving shit sure isn't helping.
edit: IF YOU GOOGLED THIS AND ARE STILL LOOKING FOR YOUR ANSWER, CHECK HERE:
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install/the-product-key-entered-does-not-match-any-of-the/47e6f575-5792-404b-9b7f-2065bdb91011

Output map: Document Type does not match any of the given schemas

On a send port, we have a map that uses a custom xslt. We were hoping to somehow design the map so the output was essentially a generic xs:any schema. But unless we ad a reference from our map assembly to the assembly that holds the actual schema for
the message pertaining to the map out put we get an error:
The Messaging Engine failed while executing the outbound map for the message going to the destination URL "C:\BizTalk\Test\%MessageID%.xml"
with the Message Type http://test#testmessage. Details:"Document type "outputtest#outputtestmessage" does not match any of the given schemas.
Is there a way to avoid having to have the reference?

Hi ,
In BizTalk messages are distinct from each other based on the message type . In your case http://test#testmessage (Namespace#RootNode)
Now coming to your case have you verified whether you have a schema type matching the response is deployed with the solution. The easy way is to look into specific BizTalk application schema node .
If not ,What you can do is to create a new schema for output having "TestMessage" as record and any element inside it. After that apply a mass copy
funtiod from source t destination(in your case any type schema created).
Thanks
Abhishek

The document type does not match any of the given schemas. batching

I am aggregating messages(batching) in Orchestation by calling pipeline. I have send pipeline where I have standard assemble component and custom pipeline in encode to assign some values .
When I test it I get following error There was a failure executing the send pipeline: "Zones._870.Pipeline.Send870Pipeline, Zones.870, Version=1.0.0.0, Culture=neutral, PublicKeyToken=51b3a99d8425ff5a" Source: "ZonesAssignGUID" Send
Port: "SendToAX870" URI: "C:\File_Out\Ingram\870\%MessageID%.xml" Reason: The document type "http://schemas.microsoft.com/dynamics/2011/01/documents/Message#Envelope" does not match any of the given schemas.
Can somebody help me how to resolve this issue?

Yes this is configured schema as envelope schema. This one is deployed in biztalk . I tried whatever suggest below query and return one record. Not sure but looks like error message misguiding here.
select * from BT_DocumentSpec where msgtype like '%http://schemas.microsoft.com/dynamics/2011/01/documents/Message#Envelope%'

The document type does not match any of the given schemas

Hi,
I have created an envelope schema.To precisely process inbound envelope documents,in the xml disassembler component i have used the Documentspec and envelopespec properties.
in the properties i have the the schema name,Assemblyname
but i have got the error like The document type does not match any of the given schemas.
I have verified the schemas have deployed properly.
can you help me on this?

Hi Sujith,
As pointed out by Johns lot's of thing can cause this. You have to analyze lot of things, but this kind of error indicates that the message type that you are debatching is not deployed. For Example :
If you are debatching on Order than Order schema should be deployed in the admin console.
One more point that you need not to specifiy Documentspec and envelopespec properties until and unless there are multiple schema's of same message type deployed in different assembly. The dissasembler component will automaticaly disassemble the messages
just looking after the body XPATH.
Regards,
Rahul Madaan

The version of iOS on does not match any of the versions of iOS supported for development with this installation of the iOS SDK

Getting this error message as of this morning: The version of iOS on “iPad” does not match any of the versions of iOS supported for development with this installation of the iOS SDK. Please restore the device to a version of the OS listed below, or update to the latest version of the iOS SDK. I've downloaded the latest SDK and gone through the usual turn off and turn on again for iPad and computer, removed and reinstalled the iPad from Organizer and have no idea how to make apps build now. I was prompted to update the iphone too but there's no way I'm updating it if this issue can't be resolved.

Okay these are the steps I took to solve the problem - they may not be the right ones for you but they've solved the problem and saved time hunting for some other solution. Firstly I changed my MAC system to Lion with the £20 download, then I deleted the old Xcode and installed the new version that is app based and doesn't support Snow Leopard, then all was well. I can now update my xcode via the app which is quicker and more logical and can update my iPhone rather than chug along avoiding updates as I need to update my existing apps on the app store and upload a new one.

Windows 8 error "product key does not match any of the Windows images available for installation"

Hi Experts
My HP Pavilion laptop came with window 8. I made the USB recovery for windows 8 using hp recovery manager. My windows was corrupted, while I was trying to install windows 7 in dual boot.
I used above USB recovery to restore factory default. But every time it is giving me error "HP Recovery Manager Failed error code = 0xefffff08"
Then I downloaded the OEM ISO mage for windows 8 and tried to do the clean install but now installation process is giving me error "The product key entered does not match any of the Windows images available for installation. Enter a different product key"
Please help me. To whom I have to contact?

Hi ghost-rider,
Thank you for your query, I will do my best to assist you.
I understand you tried to do a recovery and you received this error "oxefffff08".
First I would suggest you run a hardware diagnostics. Testing for Hardware Failures (Windows 8)
If no hardware failures are located, you have ruled that possibility out.
Here is a link to Troubleshooting HP System Recovery Problems (Windows 8) that may help.
If you are still having an issue doing a recovery, I suggest contacting HP support and explain the issue you are having with doing a recovery. They may have another option available for you.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region Technical Support Sitemap
The clean install from an OEM image is looking for the product code as it does not match the one that came with the computer, You would need a new code.
I hope this has helped.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

I had windows 8.1 but want to go back to windows 8 with clean install"the product key entered does not match any of the windows image available"

I had windows 8.1 and wanted to revert to windows 8 so i by mistake formatted the c:/ drive containing os and now when i try to install windows 8 i get the error "The product key entered..."
And i dont even have recovery image in my pc. I am using a dell laptop and i have windows 8 dvd given by dell which reads" windows 8 recovery media for windows product"
Please guide me asap.

OEM keys are embedded on hardware, you might not need to enter the key in your case. I would suggest you to call Dell support here.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

The version of OLE on the client and server machines does not match. (Exception from HRESULT: 0x80010110)

Hi,
I have installed FIM CM Client on one machine and FIM CM update service on another machine. Both are windows server 2008 r2 machines.
When i try to enroll a permanent smart card for a user, its shows me the following error:-
The version of OLE on the client and server machines does not match. (Exception from HRESULT: 0x80010110)
Also there is no logging done for the particular event.
I am able to change my smart card pin and view my smart card info. through the FIM CM client.
Is there a compatibility issue of FIM CM 2010 with Windows server 2008 r2?
Thanks

Hi,
Sorry for the delay in reply.
Please try the following steps first:
Open Powershell as Administrator
Go to Start--> Run and type wbemtest.exe.
•Click Connect.
•In the namespace text box type "root" (without quotes).
•Click Connect.
•Click Enum Instances…
•In the Class Info dialog box enter Superclass Name as "__ProviderHostQuotaConfiguration" (without quotes) and press OK. Note: the Superclass name includes a double underscore at the front.
•In the Query Result window, double-click "__ProviderHostQuotaConfiguration=@"
•In the Object Editor window, double-click HandlesPerHost.
•In the Value dialog, type in 8192
•Click Save Property.
•Click Save Object.
Under properties find the property "MemoryPerHost" or any other ones you need to modify and double click it
Change the value from 512 MB which is 536870912 to 1GB which is 1073741824
Click Save Property
Click Save Object.
•Close Wbemtest.
•Restart the computer.
And if all nodes are Windows server 2012, install the following update rollup as well:
Windows RT, Windows 8, and Windows Server 2012 update rollup: August 2013
http://support.microsoft.com/KB/2862768
If you have any feedback on our support, please send to [email protected]

RMAN-20242: specification does not match any archive log in the recovery ca

Hi,
I'm working with an 9i Oracle RAC (yes, I know this version is out of support...). I'm launching my backup from node 1 with this script
run {
sql 'alter system switch logfile'
sql 'alter system archive log current'
allocate channel TSM1 type 'sbt_tape' connect *
parms='ENV=(TDPO_OPTFILE=/home/adsmadm/rman_INF01T01/opt/tdpo.opt)'
allocate channel TSM2 type 'sbt_tape' connect *
parms='ENV=(TDPO_OPTFILE=/home/adsmadm/rman_INF01T01/opt/tdpo.opt)'
backup
format 'brman_arch_%s_%p'
(archivelog like '/logs/bbdd/oracle/INF01T01/archiver/%' channel TSM1 delete input )
(archivelog like '/logs/bbdd/oracle/INF01T03/archiver/%' channel TSM2 delete input )
release channel TSM2
release channel TSM1
And fail with this error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 08/13/2012 22:36:43
RMAN-06004: ORACLE error from recovery catalog database: RMAN-20242: specification does not match any archive log in the recovery catalog
I've take a look to the archives directories and both nodes have archives:
ora10g:/opt/ora10g > ls -lrt /logs/bbdd/oracle/INF01T01/archiver
total 97896
-rw-r----- 1 ora10g dba 2048 Aug 13 22:36 T0001S00000061440648489222.ARC
-rw-rw---- 1 ora10g dba 38132224 Aug 13 22:36 T0001S00000061430648489222.ARC
-rw-r----- 1 ora10g dba 11984896 Aug 13 22:36 T0002S00000044040648489222.ARC
ora10g:/opt/ora10g > ls -lrt /logs/bbdd/oracle/INF01T03/archiver
total 392984
-rw-r----- 1 ora10g dba 49364992 Mar 24 2009 T0002S00000007020648489222.ARC
-rw-r----- 1 ora10g dba 49364992 Mar 25 2009 T0002S00000007030648489222.ARC
-rw-rw---- 1 ora10g dba 19314688 Mar 25 2009 T0002S00000007040648489222.ARC
-rw-rw---- 1 ora10g dba 4733952 Mar 25 2009 T0002S00000007050648489222.ARC
-rw-rw---- 1 ora10g dba 4608 Apr 09 2009 T0002S00000007440648489222.ARC
-rw-rw---- 1 ora10g dba 2541056 Sep 26 2009 T0002S00000015420648489222.ARC
-rw-rw---- 1 ora10g dba 49373184 Sep 28 2009 T0002S00000015430648489222.ARC
-rw-rw---- 1 ora10g dba 3410432 Feb 11 2010 T0002S00000018680648489222.ARC
-rw-rw---- 1 ora10g dba 599552 Feb 12 2010 T0002S00000018710648489222.ARC
-rw-rw---- 1 ora10g dba 6574080 Mar 03 2010 T0002S00000019200648489222.ARC
-rw-rw---- 1 ora10g dba 1663488 Mar 08 2010 T0002S00000019340648489222.ARC
-rw-rw---- 1 ora10g dba 431104 Apr 07 2010 T0002S00000020160648489222.ARC
-rw-rw---- 1 ora10g dba 13811712 Apr 19 2010 T0002S00000020460648489222.ARC
I've tried to made a crosscheck but, only found node1 archives:
RMAN> change archivelog all crosscheck;
validation succeeded for archived log
archive log filename=/logs/bbdd/oracle/INF01T01/archiver/T0001S00000061430648489222.ARC recid=10685 stamp=791246196
validation succeeded for archived log
archive log filename=/logs/bbdd/oracle/INF01T01/archiver/T0001S00000061440648489222.ARC recid=10686 stamp=791246196
validation succeeded for archived log
archive log filename=/logs/bbdd/oracle/INF01T01/archiver/T0002S00000044040648489222.ARC recid=10687 stamp=791246197
Crosschecked 3 objects
Any idea about the way to solve it?
Thanks in advance!
dbajug

Hi,
Connect to target through rman
crosscheck archivelog all;
Then re run the backup. This will work if those two locations provided are archive log destinations.
In case the issue still persists then
Connect to target through rman
catalog start with '/logs/bbdd/oracle/INF01T01/archiver/';
catalog start with '/logs/bbdd/oracle/INF01T03/archiver/';
Then re run the backup.
Thanks,
Vivek
Edited by: 952807 on Aug 16, 2012 5:21 PM

Install maverik on my MacBook Pro, I had no problem. Two days later I was shut down suddenly and reboot with a closed padlock and asking me for a password that does not match any of mine. What I can do?

Install maverik on my MacBook Pro, I had no problem. Two days later I was shut down suddenly and reboot with a closed padlock and asking me for a password that does not match any of mine. What can I do?

Try booting to the Recovery drive, running Disk Utility and Repair disk and Repair Permissions.
1. Reboot and immediately hold down command and R (two keys).
2. When you see the screen shown on this page, select Disk Utility and continue.
3. When DU is running, select the hard drove on the left, First Aid and Repair Disk.
4. After Repair Disk, click Repair Permissions.
Quit DU and restart.

Brrestore RMAN-20242: specification does not match any archived log in the repository

Dear all,
When trying to restore arvhive logs which are taken through netbackup with the following command brrestore -a se1-seqLast=path like in the image attached . It fails with the following image:

1) crosscheck archivelog all - when the error happens here, i think this means that there are no archived redo logs in the archivelog destination?? ..or something to that nature.
2) crosscheck copy - not sure what the other errors mean here.
specification does not match any archived log in the repositoryI don't see the error here, it's only a msg that mean : There is no files on XXX destination, which is normal when no files found.

RMAN - specification does not match any archived log in the repository

Hi All,
Oracle 11G R2 on WIndows woo8 R2 Std Edition
I am running RMAN (almost for the first time), and i am using a script previously used. As i am checking through the log, i notice some 'errors' though the backup finishes successfully.
RMAN> crosscheck archivelog all;
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=352 device type=DISK
specification does not match any archived log in the repository
RMAN> crosscheck backupset;
using channel ORA_DISK_1
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=D:\ORACLE\DATABASE\ORADATA\MMSPRD7\ORAFRA\MMSPRD7\BACKUPSET\
2013_04_23\O1_MF_NCNNF_TAG20130423T134331_8QFL24F7_.BKP RECID=16 STAMP=813505412
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=D:\ORACLE\DATABASE\ORADATA\MMSPRD7\ORAFRA\MMSPRD7\BACKUPSET\
2013_04_23\O1_MF_ANNNN_TAG20130423T134334_8QFL26K1_.BKP RECID=17 STAMP=813505414
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=D:\ORACLE\DATABASE\ORADATA\MMSPRD7\ORAFRA\MMSPRD7\BACKUPSET\
2013_04_23\O1_MF_NCNNF_TAG20130423T134423_8QFL3S48_.BKP RECID=18 STAMP=813505465
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=D:\ORACLE\DATABASE\ORADATA\MMSPRD7\ORAFRA\MMSPRD7\BACKUPSET\
2013_04_23\O1_MF_ANNNN_TAG20130423T134427_8QFL3V9J_.BKP RECID=19 STAMP=813505467
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=D:\ORACLE\DATABASE\ORADATA\MMSPRD7\ORAFRA\MMSPRD7\BACKUPSET\
2013_04_23\O1_MF_NNNDF_TAG20130423T134428_8QFL3XDT_.BKP RECID=20 STAMP=813505469
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=D:\ORACLE\DATABASE\ORADATA\MMSPRD7\ORAFRA\MMSPRD7\BACKUPSET\
2013_04_23\O1_MF_NCSNF_TAG20130423T134428_8QFM4C5S_.BKP RECID=21 STAMP=813506507
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=D:\ORACLE\DATABASE\ORADATA\MMSPRD7\ORAFRA\MMSPRD7\BACKUPSET\
2013_04_23\O1_MF_ANNNN_TAG20130423T140148_8QFM4DOT_.BKP RECID=22 STAMP=813506508
Crosschecked 7 objects
RMAN> crosscheck copy;
released channel: ORA_DISK_1
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=352 device type=DISK
specification does not match any datafile copy in the repository
specification does not match any control file copy in the repository
specification does not match any archived log in the repositorySo there are 2 instances of the errors:
1) crosscheck archivelog all - when the error happens here, i think this means that there are no archived redo logs in the archivelog destination?? ..or something to that nature.
2) crosscheck copy - not sure what the other errors mean here.
Thx in advance!

1) crosscheck archivelog all - when the error happens here, i think this means that there are no archived redo logs in the archivelog destination?? ..or something to that nature.
2) crosscheck copy - not sure what the other errors mean here.
specification does not match any archived log in the repositoryI don't see the error here, it's only a msg that mean : There is no files on XXX destination, which is normal when no files found.

"specification does not match any archived log in the recovery catalog"

I would like to know about this message.
I Validated my backup and archivelogs yesterday.
Today when I tried to do - CROSSCHECK ARCHIVELOG ALL;
I gave me the following error -
RMAN> crosscheck archivelog all;
released channel: ORA_SBT_TAPE_1
released channel: ORA_DISK_1
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=291 device type=DISK
specification does not match any archived log in the recovery catalog
when I tried to list all the archivelogs then also I am getting this message -
RMAN> list archivelog all;
specification does not match any archived log in the recovery catalog
I have retention policy of 15 Days.
Waiting for your inputs.

Thanks Werner..This means that it is just a message.
One more question related to Archive Log backups -
traditionally DBAs used to take backup of an Archivelog by spupplying "alter system archive log current" before taking the backup. somewhat like -
run
allocate channel t1 device type 'sbt_tape' PARMS="ENV=(TDPO_OPTFILE=/oracle/TESTDB/tdpo.opt)";
sql 'alter system archive log current';
backup archivelog all delete input;
release channel t1;
But, since RMAN automatically archives CURRENT redo log at the start of the archivelog backup, do we REALLY need to pass sql 'alter system archive log current'; before starting the archivelog backup in the script?
RMAN> backup archivelog all;
Starting backup at 11-MAR-10
current log archived ===========> RMAN automatically archived the CURRENT redo log
released channel: ORA_DISK_1
allocated channel: ORA_SBT_TAPE_1
related question to this is - Since it generates one archived log everytime it takes the archived log backup, this backup may get hung if the archived destination is 100% full. Is there any way we can take the archive log backup without generating an extra archived log before the start of the backup?
Thanks,
Roopesh

Edge Server Certficate does not match any of the supplied FQDNs

Similar Messages

Maybe you are looking for