EDI Extending IDOC

Hi frenz,
        I've got a requirement that for a particular EDI transmission we dont have some four fields in our IDoc type. Now i just want to know which method given below is better to use;
    1) Creating new segments and putting fields into it.
    2) Using similar, unsed fields to contain those values.
      Which among these two are better?
I expect quick replies b'cos i need it urgently.
Thanks in advance,
Praveen.

hi venkat,
But i just aslo want to know y do we choose second one? Also one particular field has to be length 18, where as no fields in that IDoc type got this length. So wat do i do for this field?
Thanks in advance,
praveen.

Similar Messages

Creation of New Message Type for Extended IDoc

Dear Friends,
I want to create New Message Type for MATMAS and want to Active Change Pointers accordingly. Thru this Message Type how can I able to use Extended IDoc which I have created for Basic Idoc Type MATMAS05.
I am Sending Data from SAP to XI ; Any one can help me in this How can I create the Message Type with the IDoc Extn .
for Change Pointers.
Warm Regards,
Naveen Mutyapu.

Hi naveen mutyapu,
see these links
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
http://www.allinterview.com/rss/interview-questions/new/SAP-ALE-IDocs.xml
happy learning.
thanks
karthik

In EDI to IDOC or Idoc to EDI can we go for Dynamic recevier determination

Hi all
I am doing an EDI to IDOC scenario involving SEEBURGER( AS2) adapter .can we go for extended receiver determination
Regars
Saurabh

Saurabh,
You can not use Extended Receiver Determination coz AS2 connection is like point-to-point connection which requires AS2 id of both sender and receiver. Therefore you can not use the Extended receiver determination.
Reagrds,
Sarvesh

Process code for extended idoc

Hi,
If we are creating an extended idoc, do we have to assign a new process code to it ?
Or will the process code and the associated function module for the basic type work as well for the extended idoc ?

Process code will come in to picture when you deal with IDOCS .. you need to assign a code which internally will have a Function module or a Include, that will have entire code to run your bussiness for an IDOC or EDI or ALE.
Process Code is a different name for specific purposes like function module. IDocs are written in this process.
Outbound Process Code - if you are using outbound processing under Message Control, the IDoc is generated in the IDoc Interface. The process code names the relevant function module
Inbound Process Code - names the function module or workflow which reads the IDoc data and transfers the data to the application document.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b7d6243d711d1893e0000e8323c4f/content.htm
Enter transaction WE30 (ALE->Extension-> IDOC types->Maintain Idoc type)
Type in your name of the extended IDOC type (usually starting with 'Z') and click on the Basic IDoc type, click the create icon.
Click on Create new and enter a description and press enter.
Click on ZIDOCTYPE01 and then on the Create icon.
Enter ZIDOCTYPE as the segment type, click on Segment Editor.
Enter a description for your segment type and create.
Enter a description for your segment, enter each field required in your IDoc and press enter to validate.
Save and generate, press back
To release the segment choose Goto, Release from the menu.
Check the box on the line of your segment.
Save, back and enter.
Your Idoc type structure should be displayed with your new segment.
Save and back.
To release the Idoc type choose Extras, Release type from the menu and Yes.
Reward points if useful.

Error while Filling custom extended idoc

i have extended segment e1edpa1 with ZLOC segment in INVOIC01 idoc .now i'm filling this extended idoc from exit EXIT_SAPLIEDI_101 but it is giving me error like "EDI: Syntax error in IDoc (mandatory segment missing)" can anyone tell me what could be the reason?below is my code.
WHEN 'E1EDPA1'.
      MOVE idoc_data-sdata TO e1edpa1.
      IF e1edpa1-parvw = 'WE'.
        SELECT SINGLE * FROM kna1 INTO w_kna1 WHERE kunnr = e1edpa1-partn.
        IF sy-subrc = 0.
          MOVE: w_kna1-locco TO zloc-locco,
                w_kna1-bahne TO zloc-bahne.
          MOVE 'ZLOC' TO idoc_data-segnam.    " administrative section
          MOVE zloc TO idoc_data-sdata.       " data section
          APPEND idoc_data.
thx

Why do you need to add a segment via code in an inbound IDOC? we dont populate segments in inbound processing, rather you shoul dbe getting value from the source system in the IDOC, and reading the custom segment to process the values.
if source is not sending the values , and you need those then you are supposed to read and process the values to move those to corresponding structure for SAP program to process the data. Adding a segment in inbound is not going to get you anything.

Prob in extended idoc - ORDER05

Hi,
I have extended basic type orders05. when i run the FM, EXIT_SAPLVEDC_003, inside where i have written code for populating the z segments, i am unable to see the segments at all.
i mean, i can NOT see edidd-segnam EQ extended segment names. i have created a project in Cmod and its active as well.
Please help me out.
Edited by: Aafaque Husain on Dec 21, 2007 10:29 AM

Thanks Martin,
I am able to see the extended idoc segments now as per logic told by you, but now when i m testing the idoc and checking the result in we02, i m getting an error which reads as follows,
EDI: Syntax error in IDoc (segment cannot be identified)
Message no. E0078
Diagnosis
The segment ZST_STORMS does not occur at the current level of the basic type ORDERS05 (extension ZORDER05).
This error can have several reasons:
The segment ZST_STORMS is assigned to a group whose header segment does not occur.
The segment ZST_STORMS does not exist in the syntax description of the basic type ORDERS05 (extension ZORDER05).
The sequence of segments in the group in which the segment appears is incorrect.
Previous errors ('mandatory' segment or group missing) may be due to this error.
Procedure
Please check the IDoc or the syntax description of the basic type ORDERS05 (extension ZORDER05).
please can u help me out in this.
Thanks for ur help extended.

Extend idoc

for extended idoc i added the extended segment to basic type and doen
the code as per that but i would like to confirm one thing that for
every extended idoc for process code we need to modify the existing FM
like MASTERIDOC_CREATE_DEBMAS ,
for this FM we need to finc the enhansment and then modify the code
as per that , so is the same for all extended idoc we need to find
related FM for that and find enhancement and modify .

Enter transaction WE30 (ALE->Extension-> IDOC types->Maintain Idoc type)
- Type in your name of the extended IDOC type (usually starting with 'Z') and click on the Basic IDoc type, click the create icon.
- Click on Create new and enter a description and press enter.
- Click on ZIDOCTYPE01 and then on the Create icon.
- Enter ZIDOCTYPE as the segment type, click on Segment Editor.
- Enter a description for your segment type and create.
- Enter a description for your segment, enter each field required in your IDoc and press enter to validate.
- Save and generate, press back
- To release the segment choose Goto, Release from the menu.
- Check the box on the line of your segment.
- Save, back and enter.
- Your Idoc type structure should be displayed with your new segment.
- Save and back.
- To release the Idoc type choose Extras, Release type from the menu and Yes.
ALE FUNCTION MODULE ENHANCEMENTS
Having extended the IDOC type to contain additional fields for an inbound or outbound application, you now want to enhance ALE function modules for populating the additional segment on the outbound or applying the additional segment data on the inbound application.
The core working code for ALE processes for a given application area is always encapsulated in ABAP/4 function modules. These function modules are associated with such control information as message types and process codes. So the ALE process checks this control information and derives the name of the function module to invoke for that particular IDOC processing from certain database tables. These function modules contain objects known as customer functions, which can be considered SAP Enhanced user exits. A function module is called at a particular point during the processing of the main program or function module, and it can be used to influence data processing at that point by adding code to the customer function. The customer function behaves like a normal function module and has import and export parameters, tables (internal tables) statement, and exception processing. Unlike a conventional user exit, customer functions give you the ability to modify only data available to you by the function moduleâs parameters and internal tables. While most ALE/EDI function modules are supported by customer functions, there are ALE/EDI processes that still use conventional user exits. There are a few ways to determine which function module to enhance for a given message type/process code:
For master data distribution, from SALE go to Extensions -> Master data distribution -> Setup additional data for message types. Search for message type DEBMAS in this example. You see an entry for DEBMAS associated with function module MASTERIDOC_CREATE_SMD_DEBMAS. This data is stored on table TBDME. The function module names for all master data message types follow this pattern: MASTERIDOC_CREATE_SMD_messagetype. This function module calls another function module of name MASTERIDOC_CREATE_DEBMAS or MASTERIDOC_CREATE_messagetype. Search for the words customer function, and you find several hits that can be used to add code to the function module.
From WEDI got to Control -> Inbound process codes -> Inbound with ALE service -> Processing by function module (transaction WE42), or from WEDI go to Control -> Outbound process codes -> Outbound with ALE service -> With function module (transaction WE41). There will be function modules associated with the process codes. For inbound, the function modules usually follow this pattern: IDOC_INPUT_messagetype: for example, IDOC_INPUT_CHRMAS for inbound characteristics master.
Use transaction WE57 or from WEDI go to Development -> Message/Application Object. The entries list the function module, Business Object, message type, and IDOC type that are used for inbound ALE/EDI interfaces.
Customer functions are not specific only to ALE and EDI but also to all programs/modules in SAP R/3. Customer function is a SAP enhancement component; the other two types are menu and screen enhancements.
All customer function exits are maintained in SAP enhancements and are found by using transaction SMOD. After executing transaction SMOD, pull down (F4) on the enhancement name field, and execute again. This provides you with a list of all SAP enhancements available. SAP enhancements are grouped by development class pertaining to an application area. Choose Application development R/3 SD master data distribution for development class VSV to lead to a screen that lists VSV00001 as an enhancement (see Figure 5). Press Component +/- to display its function exit components. There are four possible components listed, all of which are function exits (and are function modules) that are called from the ALE function modules in the form Call Customer Function Î001â. This is a special occurrence of the ABAP statement Call. Go to item Exit_SAPLVV01_ 001, which you need to enhance for the Customer Master outbound example of an IDOC extension. In the ALE-function module MASTERIDOC_CREATE_DEBMAS, the statement CALL Customer Function 001 is translated in the background to call component EXIT_SAPLVV01_001. Although this function exit can be edited using transaction SE37, you will use a simpler approach.
When you use SAP enhancements and their components, you manage them with an SAP object known as a project, which is like an envelope containing the selected enhancements and their components. A project can be used to control the execution of components and to transport them to other clients and instances in SAP. Basically, the process involves creating a project, including enhancements and components that are to be enhanced, editing the components, and then activating the project. The following process creates a project for our example Customer Master IDOC extension:
Execute transaction CMOD.
Enter name of project, say CSTMAST1.
Click on Create.
Enter a description of the project.
Save.
Click on SAP Enhancements.
Enter VSV00001 for Enhancement.
Save.
Once youâve created the project, edit the function exit components and activate the project. Remember that the code in the function exit enhancement will execute only if the project is activated. In fact, this is a convenient SAP enhancements feature, whereby the work in progress (developing code in the customer function) will not affect users of that application. When the code is completed, the project can be activated so the enhanced functionality takes effect. It can also be deactivated for maintenance.
As mentioned earlier, customer functions (function exits) are embedded in ALE function modules and can be used to influence the creation and modification of IDOC data on an outbound application or to post additional or modified IDOC data to an inbound R/3 application. Function exits are similar to regular function modules, with import/export parameters, tables (internal tables), and exceptions.
The two important factors to consider while developing the customer function are:
1. The point in the ALE function module where the function exit occurs
2. The data made available by the customer function that can be modified or posted to the R/3 application, based on the direction.
Because some function modules have several customer functions, it is critical to choose the function exit best suited for that particular enhancement. Do not attempt to perform activities that the function exit is not designed for. The importance of this point is illustrated by the following description of enhancing function modules for outbound and inbound ALE interfaces.
Outbound interfaces. In an outbound ALE interface you use function exits (customer functions) to populate additional segments created by an IDOC extension or to modify the existing IDOC data segments as per business requirements. Previously, you identified that enhancement VSV00001 has a component EXIT_SAPLVV01_001 (function exit), which can be used for populating the additional data segment Z1SADRX that you created in the IDOC extension ZDEBMASX (IDOC type ZDEBMASZ, based on Basic IDOC type DEBMAS02). You also learned that the ALE function module that calls this function exit is MASTERIDOC_CREATE_DEBMAS, which has a statement Call Customer Function 001.
Browse the function module MASTERIDOC_CREATE_DEBMAS using transaction SE37. You will find that this customer function is invoked for every segment of IDOC type DEBMAS02. In fact, the function exit is called soon after the creation of an existing segment has been populated with data and appended to the IDOC data table (internal table). Also, the function exit is exporting the message type, IDOC type, and the segment name and is importing the IDOC extension type. It is also passing the IDOC data internal table. This indicates that the ALE function module is allowing you to populate additional segments for every existing segment and modify the existing segmentâs data.
Letâs write ABAP/4 code to accomplish the task of populating IDOC segment Z1SADRX with a contact personâs business address:
From SE37, display function module MASTERIDOC_CREATE_ DEBMAS.
Find Customer Function 001.
Double-click on 001.
The function EXIT_SAPLVV01_001 will be displayed.
Double-click on INCLUDE ZXVSVU01.
You will be asked to create a new include object. Proceed as desired.
Enter code (as in Listing 1).
Be sure to perform a main program check (Function Module -> Check -> main program) and extended program check (Function module -> Check -> Extended check).
Now that you have extended the IDOC and enhanced the ALE function module based on the requirements for the contact personâs business address on the Customer Master, letâs test the interface. You should create a logical system and define a port for this interface. You should also configure the Customer Distribution Model to indicate that message type DEBMAS is being distributed to this logical system. The only difference in configuration between a regular outbound ALE interface and an enhanced one is the partner profile definition. While maintaining the outbound parameters of the partner profile, make sure the IDOC type is ZDEBMASZ. The fields for Basic IDOC type and extension type are automatically populated with DEBMAS02 and ZDEBMASX, respectively.
To maintain the contact personâs business address of a customer:
Use transaction BD12 or from BALE go to Master Data ->Customer -> Send and send that Customer Master record by executing the transaction after filling in the relevant fields such as customer number, message type, and logical system.
Use transaction WE02 or WE05 to verify the IDOC created. You should see the new segment Z1SADRX populated with the correct data.
With SAP releases below 4.5B, you cannot capture changes to business address through change pointers because a change document object is not available for capturing business address changes, and also earlier releases have not been configured to write change documents for a contact personâs business address. If you would like this functionality, you can either create change document objects, generate function modules to create change documents, and perform ALE configuration to tie it in, or make a cosmetic change to the contact person screen data while changing the contact personâs business address so that it gets captured as a change to the Customer Master. Subsequently, the ALE enhancement that you performed captures the contact personâs business address.
Inbound interfaces. The process for enhancing inbound ALE interfaces is similar for outbound, with a few exceptions; specifically in the coding of customer functions (function exits) for the ALE/EDI function modules.
The first step is to create an IDOC extension for the specific Basic IDOC type by adding new segments at the appropriate hierarchy level: that is, associated to the relevant existing segment. Populate the data fields on the new segments with application data by the translator or external system/program before importing them into the R/3 System. Then, find the ALE function module that is invoked by the inbound processing. By browsing through the code or reading the documentation on the function exit enhancements using the SMOD transaction, identify the function exit in which you should place your code. The technique used in the code to post the additional or modified IDOC data to the application can vary based on the application rules and requirements, the data available at that point in processing, and the application function modules available to update the application tables. It is important to search first for application modules that process the data and see if they can be called within the function exit. If the additional data in the extended segments in specific to a custom table or resides in nonkey fields of a single or small set of tables, you may be able to update it directly by SQL statements in the function exit. This approach should be carefully evaluated and is certainly not highly recommended.
Another option is to use Call Transaction from within the function exit to process the additional data. For example, in the case of message type WMMBXY for inbound goods movements from a warehouse management system, the standard interface creates batches for materials, but does not update its characteristics. In such a case, you can use Call Transaction MSC1 to create the batch and assign characteristic values to it from within the function exit provided.
regards,
srinivas

What is DME,EDI and IDOCs, and anybody can tell the differences among them

Hai
I would likt to know in detail exactly how does these DME, EDI and IDOC do work and in what way they serve the purpose of meeting the payment requirements.
I appreciate the early response and I will extend my Gratitude in advance.
Regards,
Akash Narayana

Hi Akash,
The
Data Medium Exchange (DME) Engine enables you to define file formats that meet the requirements of your financial institution. By doing so, you model an externally defined bank format in the R/3 System, which allows you to send or receive data in the form of DME files in this format.
The ability to define these formats in the R/3 System is particularly important as there is no worldwide or regional standard format. In some cases, no country standard exists and the file must comply with bank-specific standards. Covering such numerous and varied local format requirements is very difficult in standard software, but the DME Engine now enables you to define your particular local format yourself without any ABAP programming knowledge or coding. With this Customizing tool, in the form of a graphical editor, you can define new formats flexibly and, as format requirements change, modify existing ones efficiently.
Integration
Once you have modeled an external file format as a format tree in the DME Engine, calling applications can use it to:
· Generate an outgoing DME file as a flat file or an XML file
· Convert an incoming DME file to a format that the R/3 System can process
Features
The system comes complete with predefined format trees, which represent the file format requirements in a number of countries.
You can also transport format trees to other systems, or alternatively upload and download as XML files.
Electronic Data Interchange (EDI) is a set of standards for structuring information to be electronically exchanged between and within businesses, organizations, government entities and other groups. The standards describe structures that emulate documents, for example purchase orders to automate purchasing. The term EDI is also used to refer to the implementation and operation of systems and processes for creating, transmitting, and receiving EDI documents.
Despite being relatively unheralded, in this era of technologies such as XML services, the Internet and the World Wide Web, EDI is still the data format used by the vast majority of electronic commerce transactions in the world.
IDoc (for intermediate document) is a standard data structure for electronic data interchange (EDI) between application programs written for the popular SAP business system or between an SAP application and an external program. IDocs serve as the vehicle for data transfer in SAP's Application Link Enabling (ALE) system. IDocs are used for asynchronous transactions: each IDoc generated exists as a self-contained text file that can then be transmitted to the requesting workstation without connecting to the central database. Another SAP mechanism, the Business Application Programming Interface (BAPI) is used for synchronous transactions.
I hope the above helps.
Do not forget to award the points please.
Regards,
Jacob

How to find out the inbound function module in the extended idoc

Hi,
how to find out the inbound function module in the extended idocs
Thanks .

through we41/we42 you can find the inbound function module.......
or
thorough we19(idoc test tool) ....
give the input as message type or basic idoc..
press exec...
then you can find th button on application tool bar as inbound funtion module....
from here also you can find..........
<REMOVED BY MODERATOR>
Khasimsa
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 1:34 PM

Problem about extended IDOC(urgent)

Hi experts,
i have idoctype,extended idoc,and one include.. i need modify that according to the requirement.. here i will give the idoctype and extended idoc type and include program .. please help me where exactly i need to do the change and what are the steps required for the requirement..
Exact Requirement: Modify the program which populates the idoctype invoice02 and extension zinvoice02 , if netvalue is zero(vbrp-netwr = 0) then populate the idoc segment E1EDP01.E1EDP26 , BETRG WITH QUALF = # 011' WITH ZERO VALUE. curently segment is not populated.
Please help me in this and explain the steps required for this.
idoctype:invoice02
extended idoc:zinvoice02
include:ZXEDFU02
 Here i am giving the include program
CASE dobject-kschl.
WHEN 'ZGRI' OR 'ZGDF' OR 'ZGRN' OR 'ZGAE'.
 t_int_edidd[] = int_edidd[].
 t_xtvbdpr[] = xtvbdpr[].
 ta_xvbdkr = xvbdkr.
 CASE int_edidd-segnam.
 WHEN 'E1EDK01'.
 ta_e1edk01 = int_edidd-sdata.
 PERFORM get_shipment_data.
 PERFORM get_route_data.
 int_edidd[] = t_int_edidd[].
 WHEN 'E1EDP01'.
Update segment E1EDP01
1. Update field E1EDP01-PSTYP
2. Accumulated net weight & quantity of batch split items against
E1EDP01 segment of the main invoice item.
 ta_e1edp01 = int_edidd-sdata.
 i_tabix = sy-tabix.
 CLEAR: ta_e1edp02. "DIAG01+
 PERFORM update_segment_e1edp01.
 MOVE ta_e1edp01 TO t_int_edidd-sdata.
 MODIFY t_int_edidd INDEX i_tabix TRANSPORTING sdata.
Populate segment Z1EDP08
Fields: ZZDESPACTY_A, ZZACTYUOM
 PERFORM validate_segment USING control_record_out-idoctp
 control_record_out-cimtyp
 'Z1EDP08'
 CHANGING n_subrc.
 CHECK n_subrc EQ 0.
 PERFORM calc_invoice_item_zzdespacty_a. "DIAG02+
 int_edidd[] = t_int_edidd[]. "DIAG02+
 WHEN 'E1EDP02'. "DIAG01+
 IF int_edidd-sdata(3) = '016'. "DIAG01+
 ta_e1edp02 = int_edidd-sdata. "DIAG01+
 ENDIF. "DIAG01+
 WHEN 'E1EDP19'.
Populate segment Z1EDL24
Fields: Material Characteristics or Material Class '001'.
 PERFORM validate_segment USING control_record_out-idoctp
 control_record_out-cimtyp
 'Z1EDL24'
 CHANGING n_subrc.
 IF n_subrc EQ 0.
 ta_e1edp19 = int_edidd-sdata.
 CASE ta_e1edp19-qualf.
 WHEN '002'.
 PERFORM get_mat_characteristic USING ta_e1edp19-idtnr.
 PERFORM fill_segment_z1edl24.
 int_edidd[] = t_int_edidd[].
 WHEN OTHERS.
 ENDCASE.
 ENDIF.
 WHEN 'E1EDP26'.
Populate segment E1EDP26
Fields: BETRG
 i_tabix = sy-tabix.
 ta_e1edp26 = int_edidd-sdata.
 IF ta_e1edp26-qualf = '001'. "Gross Price which is always present
 PERFORM fill_segment_e1edp26.
 int_edidd[] = t_int_edidd[].
 ENDIF.
 WHEN 'E1EDP08'.
Populate Segment Z1EDL37 *
Fields: Bespoke fields from Handling Unit (VEKP)
 PERFORM validate_segment USING control_record_out-idoctp
 control_record_out-cimtyp
 'Z1EDL37'
 CHANGING n_subrc.
 CHECK n_subrc EQ 0.
 ta_e1edp08 = int_edidd-sdata.
 PERFORM fill_segment_z1edl37.
Populate Segment Z1EDP08 *
Fields: Total Despatch Activity *
 PERFORM validate_segment USING control_record_out-idoctp
 control_record_out-cimtyp
 'Z1EDP08'
 CHANGING n_subrc.
 CHECK n_subrc EQ 0.
 PERFORM calc_invoice_item_acty_total.
 int_edidd[] = t_int_edidd[].
 WHEN OTHERS.
 ENDCASE.
WHEN 'ZGDW'.
Line above added line below removed - Assyst 73789
WHEN 'ZGIN'.
 t_int_edidd[] = int_edidd[].
 t_xtvbdpr[] = xtvbdpr[].
 ta_xvbdkr = xvbdkr.
 CASE int_edidd-segnam.
Start SU02
 WHEN 'E1EDK01'.
 ta_e1edk01 = int_edidd-sdata.
 i_tabix = sy-tabix.
Get the conversion factor
 PERFORM modify_exchange_rate.
 MOVE ta_e1edk01 TO t_int_edidd-sdata.
 MODIFY t_int_edidd INDEX i_tabix TRANSPORTING sdata.
 int_edidd[] = t_int_edidd[].
End SU02
*************************************************************SAM01 START
 WHEN 'E1EDP02'.
Populate segment Z1EDP02
Fields: Reason code for sales order
 ta_e1edp02 = int_edidd-sdata.
 CASE ta_e1edp02-qualf.
 WHEN '002'.
 PERFORM fill_segment_z1edp02.
 PERFORM append_int_edidd TABLES t_int_edidd
 USING 'Z1EDP02'
 ta_z1edp02.
 int_edidd[] = t_int_edidd[].
 WHEN OTHERS.
 ENDCASE.
***************************************************************SAM01 END
 ENDCASE.
Start of JvdM01
WHEN 'ZGII'. "JvdM01
 t_int_edidd[] = int_edidd[].
 t_xtvbdpr[] = xtvbdpr[].
 ta_xvbdkr = xvbdkr.
 CASE int_edidd-segnam.
 WHEN 'E1EDK01'.
Populate segment Z1EDKSH and Z1REM_STE_CDE
Fields: Shipment Number for Invoice
 Reason code for sales order
 ta_e1edk01 = int_edidd-sdata.
 PERFORM fill_segment_z1edksh_ds.
 PERFORM append_int_edidd TABLES t_int_edidd
 USING 'Z1EDKSH'
 ta_z1edksh.
 PERFORM fill_segment_z1rem_ste_cde.
 PERFORM append_int_edidd TABLES t_int_edidd
 USING 'Z1REM_STE_CDE'
 ta_z1rem_ste_cde.
 int_edidd[] = t_int_edidd[].
 WHEN 'E1EDKA1'.
Populate segment Z1EDKA1
Fields: Customer Account Group
 ta_e1edka1 = int_edidd-sdata.
 CASE ta_e1edka1-parvw.
 WHEN 'RE'. "Bill To Party
 PERFORM fill_segment_z1edka1.
 PERFORM append_int_edidd TABLES t_int_edidd
 USING 'Z1EDKA1'
 ta_Z1EDKA1.
 int_edidd[] = t_int_edidd[].
 ENDCASE.
 WHEN 'E1EDP01'.
Read segment E1EDP01 for use later "JVDM02
 ta_e1edp01 = int_edidd-sdata.
 WHEN 'E1EDP02'.
Populate segment Z1EDP02
Fields: Reason code for sales order
 ta_e1edp02 = int_edidd-sdata.
 CASE ta_e1edp02-qualf.
 WHEN '002'.
 PERFORM fill_segment_z1edp02.
 PERFORM append_int_edidd TABLES t_int_edidd
 USING 'Z1EDP02'
 ta_z1edp02.
 int_edidd[] = t_int_edidd[].
 WHEN OTHERS.
 ENDCASE.
 WHEN 'E1EDP19'.
Populate segment Z1EDL24 and Z1EDP01 "JVDM02
Fields: Pack Size Activity for Material
 Total Activity for Invoice Item
 ta_e1edp19 = int_edidd-sdata.
 CASE ta_e1edp19-qualf.
 WHEN '002'.
 PERFORM fill_segm_z1edl24_and_z1edp01.
 PERFORM append_int_edidd TABLES t_int_edidd
 USING 'Z1EDL24'
 ta_z1edl24.
 PERFORM append_int_edidd TABLES t_int_edidd
 USING 'Z1EDP01'
 ta_z1edp01.
 int_edidd[] = t_int_edidd[].
 WHEN OTHERS.
 ENDCASE.
 ENDCASE.
End JvdM01
ENDCASE.
Start SU02 Code Comment for implementing IR 340
**mpc01 - start of insert
start assyst 73789
*IF dobject-kschl = 'ZGDW'."amersham invoices
**IF dobject-kschl = 'ZGIN'."amersham invoices
end assyst 73789
CASE int_edidd-segnam.
for the organisation data header
 WHEN 'E1EDK14'.
 MOVE int_edidd-sdata TO ta_e2edk14.
 where is qualifying organisation = 003 (delivering company code).
 IF ta_e2edk14-qualf = '003' AND ta_e2edk14-orgid NE space.
 SELECT SINGLE waers
 INTO t001-waers
 FROM t001
 WHERE bukrs = ta_e2edk14-orgid.
 IF sy-subrc = 0.
 t_int_edidd[] = int_edidd[].
 get the billing date for the invoice
 LOOP AT t_int_edidd WHERE segnam = 'E1EDK02'.
 MOVE t_int_edidd-sdata TO ta_e1edk02.
 IF ta_e1edk02-qualf = '009'."billing date
 w_fkdat = ta_e1edk02-datum.
 EXIT.
 ENDIF.
 ENDLOOP.
 if no invoice date use current date
 IF w_fkdat IS INITIAL.
 w_fkdat = sy-datum.
 ENDIF.
 change the general document header
 LOOP AT t_int_edidd WHERE segnam = 'E1EDK01'.
 i_tabix = sy-tabix.
 MOVE t_int_edidd-sdata TO ta_e1edk01.
 set the field to the default currency code for the company
 ta_e1edk01-hwaer = t001-waers.
 if the default value equals the idoc currency then exit
 IF t001-waers = ta_e1edk01-curcy.
 EXIT.
 ENDIF.
 get the exchange rates
 SELECT *
 INTO TABLE t_tcurr
 FROM tcurr
 WHERE kurst = 'NYB1' " SU01
 WHERE KURST = 'GEBU' " SU01
 AND fcurr = ta_e1edk01-curcy
 AND tcurr = t001-waers.
 IF sy-subrc NE 0."no values found
 error the idoc
 MESSAGE e400(vf) WITH c_exchange_rate_error
 RAISING error_message_received.
 EXIT.
 ENDIF.
 LOOP AT t_tcurr.
 convert to date from inverted date to normal date format.
 CALL FUNCTION 'CONVERSION_EXIT_INVDT_OUTPUT'
 EXPORTING
 input = t_tcurr-gdatu
 IMPORTING
 output = w_datum.
 CONCATENATE w_datum+6(4)
 w_datum+3(2)
 w_datum(2)
 INTO t_tcurr-datum.
 MODIFY t_tcurr.
 ENDLOOP.
 sort the exchange rates with the newest first.
 SORT t_tcurr BY datum DESCENDING.
 read the first value in the table ie the newest.
 LOOP AT t_tcurr WHERE datum <= w_fkdat.
 EXIT.
 ENDLOOP.
 IF sy-subrc NE 0."no values found
 error the idoc
 MESSAGE e400(vf) WITH c_exchange_rate_error
 RAISING error_message_received.
 EXIT.
 ENDIF.
Start SU01
Get the Exchange rate from the function module and populate
E1EDK01 TABLE
 w_fcurr = ta_e1edk01-curcy.
 call function 'CONVERT_TO_LOCAL_CURRENCY'
 exporting
 date = w_fkdat
 foreign_amount = '0'
 foreign_currency = w_fcurr
 local_currency = t001-waers
 type_of_rate = 'GEBU'
 importing
 exchange_rate = t_tcurr-ukurs
 exceptions
 no_rate_found = 1
 overflow = 2
 no_factors_found = 3
 no_spread_found = 4
 derived_2_times = 5
 others = 6.
End SU01
 ta_e1edk01-wkurs = t_tcurr-ukurs.
 change the header data in segment
 MOVE ta_e1edk01 TO t_int_edidd-sdata.
 update the current idoc segment
 MODIFY t_int_edidd INDEX i_tabix TRANSPORTING sdata.
 EXIT.
 ENDLOOP.
 update all of the idoc segments
 int_edidd[] = t_int_edidd[].
 ENDIF.
 ENDIF.
ENDCASE.
*ENDIF.
**mpc01 - end of insert
End SU02 Code Comment for implementing IR 340

Hi Venu,
Try with this code.
If vbrp-netwr = 0.
 WHEN 'E1EDP26.
CASE ta_e1edp26-qualf.
ta_e1edp26 = int_edidd-sdata.
WHEN '011'.
PERFORM append_int_edidd TABLES t_int_edidd
USING 'e1edp26'
ta_e1edp26.
int_edidd[] = t_int_edidd[].
ENDCASE.
ENDIF.
Thanks
Manju.

Problem in Extended Idoc

Hi All,
I have Extended ORDERS05 for adding custom fields for inbound process,
Steps i have fallowed to create Extend Idoc:
1,Created new segment with all Z-fields and released,
2,Created Extension Idoc with reference standard Idoc ORDER05, and added custom segment under standard segment E1EDP01,
released Extend Idoc,
am able to see all Z-fields in Z-segment,
but my problem is am unable to see any standard fields under any standard segment in my Extended Idoc?
why am not able to see all standard fileds?
Regards
suresh.d

Hi,
Are you checking in WE30 or in WE02?
In WE30 you cans ee only Segment names.
Give the segment name in SE11 and then see if you are able to see the fields.
Regards,
Sravan

Problem creating extended IDOC

Hi Experts,
I am currently working on CRM 5.0. I need to create segment and attach it to the standard basic IDOC type CRMXIF_PARTNER_SAVE01. I am able to create segment in WE31 but i am unable to add that to the basic standard IDOC type.
It is displaying message "Action is not possible for generated idoc types".
Is there any other way to add this segment to the standard IDOC.
It will be great help if u can send me some documents on this...
Thanks,
Samm

Hi,
Create Extended IDOCe using transaction WE30.
-If u want to extend idoc type which already exists then use the radio button extension(where we can add few new fields
-After this click on create button as described above. It takes you to a popup screen where you fill the description and also select the radio button accordingly and say ok
-we go to next screen select idoc type and click on create new It gives a pop up window
-Once you are done with the addition save the IDOC type and release the idoc type
Goto-> Edit -> Set release.
This completes the creation of Ext IDOC type.
- Then assign this extension to the IDoc type in WE82.
Reward with points if helpful.
Regards,
Vijay

Seeburger EDI to IDoc

Hi,
The actual payload is not getting generated in the EDI to IDoc scenario.
The acknowledgment is getting generated.
What could be the possible error?

Anu,
is your mapping determined automatically or are you explicitly stating the mapping name in your
module configuration?
If you set mappingName to Auto BIC tries determine the correct mapping by looking at the
the UNH segments, e.g. UNH1ORDERS:D:97A:AA'. If your mapping has been labeled
differently in the Mapping Designer, for instance E2X_ORDERS_UN_D97A the system
won't be able to find the mapping and therefore you won't get any payload.
As I suggested before try using the parameter u2018logAttIDu2019 Value u2018ConverterLogu2019 in your
module chain that will most likely tell you what the problem is.
Sven
Edited by: Sven Buttler on Jul 9, 2010 10:26 AM

Userexit for extended idoc for std. idoc WMMBID02 for T.Code MB1A & MB1B

Hi,
Which userexit we have to use to populate values in to extended idoc fields of the standard inbound idoc WMMBID02?
Pls share ur experience.
Thanks & Regards,
Balaji

Hello using this you can find out used user exit
1.From SE93 get the program name corresponding to the transaction.
2. then se38 - > enter program name -> attribute -> display
3. Get the package from here.
4. Go to SMOD . Do f4 on enhancement -> information system. enter your package here
5. You will get the list of all the available exits for the package.
List could be a long one.Now best thing to do is to sit with your functional analyst. find out approproate exit from the description. put a break-point there. ask functional analyst to run the transaction. if transaction stops at the break point that's the exit you want

Need to extend idoc MBGMCR03

Hi all,
I want to extend idoc MBGMCR03 to pass serial no. data since the client serial no. length is 40 chars whereas SAP supports only 18 chars. When I try to extend the idoc, I get error message 'Action is not possible for generated idoc types'.
This idoc being a ALE-BAPI interface cannot be extended.
Can anyone tell me what's the best way of passing the serial no. data through the idoc? I have thought of using segment E1BPPAREX as nothing is being passed in it. We will be having a custom process code function module in which the values will be stored in an internal table and then the fields will be cleared so that the idoc can be posted.
Thanks,
Shoma

Hi Gordon,
Cann't i extend the MBGMCR03 Idoc type .I need to add 2 fields MENGE and ELIKZ.
Do we need to have primary key field in WE31 along with MENGE and ELIKZ like Item no EBELP.
I created a structure with above 4 fields along with EBELN.
I am not able to create extension in WE30.
it is saying that " Action is not possible for generated idoc types".
Please let me know the User exit or Customer Exit to use to populate the data.
Please help
Thanks & regards
Vishnu
Edited by: vishnukvv on Mar 4, 2011 11:57 AM
Edited by: vishnukvv on Mar 4, 2011 12:08 PM
Edited by: vishnukvv on Mar 4, 2011 12:10 PM
Edited by: vishnukvv on Mar 4, 2011 12:27 PM
Edited by: vishnukvv on Mar 4, 2011 12:28 PM

EDI Extending IDOC

Similar Messages

Maybe you are looking for