Edit the clause where in a datablock

i want to edit the clause where in a datablock in forms 10g
je veux que to_date(champdb,'dd/mm/yyyy') = :champforms
je fais
set_block_property('plombage',DEFAULT_WHERE ,'to_date(dateplomb,'dd/mm/yyyy')= decode(:dateplombage,null,DATEPLOMB,'||:dateplombage||')');

Ok, but if you want to compare the data without time-part, don't use to_char, user TRUNC(DATEPLOMB), and instead of your code
to_date(to_char(sysdate,'dd/mm/yy hh24:mi'),'dd/mm/yy hh24:mi')its simpler to use
trunc(sysdate, 'MI')

Similar Messages

How do I edit the file where sites which I have typed in on the command line are stored? These are sites which I no onger use.

At times I type in a site name on the command line which I want to visit. This goes into a file which is accessed by highlighting the triangle on the right side of command line. This file contains previous sites which were accessed in the past. How do I edit this file and and remove previous site URLs?

Use these steps to remove saved (form) data from a drop down list:
#Click the (empty) input field on the web page to open the drop down list
#Highlight an entry in the drop down list
#Press the Delete key (on Mac: Shift+Delete) to remove it.
*http://kb.mozillazine.org/Deleting_autocomplete_entries
*https://support.mozilla.com/kb/Clearing+Location+bar+history
*https://support.mozilla.com/kb/Cannot+clear+Location+bar+history

In Pages, how do I edit the "My Card" data?

in Pages, how do I edit the "My Card" data?
I can't get a sender field to select my Email address or mobile phone.
I've searched the Help file for "My Card" and come up with nothing.
I've looked in My Contacts and edited the data where my name has a little blue bust (figuring MAYBE that's the My Card),
but everything looks correct in there, so the sender field isn't pulling data from here.
So WHERE DO SENDER FIELDS COME FROM?

Peter:
First of all, THANKS for the quick reply. However it’s not working, either from the Link Inspector, or directly from the Menu. Here’s the steps to reproduce the problem:
I start with a new blank document, then pull down the Insert menu / Sender Field / Name / First Name, all it does is insert the word “First Name” into the document.
Pull down the Insert menu / Sender Field / Phone / Home Phone, all it does is insert the words “Home Phone”.
Same with all the other fields.
In other words, Sender Fields are not pulling data from the Contacts list.
I have done as you suggested, even closing both the Pages program AND Contacts, then starting Contacts first before starting Pages, in the hope that the link between the two will be established when starting Pages. Still no good.
I got it to work once last night (which was a good sanity-check for me to know I was doing it right) after editing my contact data inside the Contacts program, but I can’t get it to work today. I’ve tried rebooting, restarting Contacts, starting contacts BOTH before and after starting Pages. But it still won’t go.
It’s hard to believe this program is an Apple product, seeing how unreliable it is.
Any other suggestions?
Vic

Does the 'default where clause' query select the ROWID by default ?

Hi ,
The query in default where property of a data block is as follows:
global.prim_lang = :global.user_lang
and upper(group_name) like upper('%' || :B_apply_inclusions.TI_group_desc || '%')
UNION ALL
select g.rowid, g.group_no
from table1 t,
table 2 g
where :global.prim_lang != :global.user_lang
and upper(g.group_name) = t.key(+)
and :global.user_lang = t.lang(+)
and upper(nvl(t.translated_value, g.group_name)) like upper('%' || :B_apply_inclusions.TI_group_desc || '%')
The g.rowid was added in the UNIONALL portion of the query because the first part of the query was bringing rowid as well.
We are in 10.1.2.3.0 forms version.
However for a user in forms verion 10.1.2.0.2, the query is giving an error " Unable to perform query " - due to mismatch in the number of columns selected in the query union.
because for this user, rowid is not selected as part of default where clause query( 1st part of the query before the unionalll).
If g.rowid is removed from the 2nd part of the query , it errors out in 10.1.2.3.0 forms version.
Could you kindly clarify when this rowid will also be selected by the default where clause of a block and why this issue is occuring?Is this issue related to forms version or any other property of the block? Is it is version based, is there a patch available to deal with the same?
Thanks in Advance.

You normally change the default_where block property just when you want to chnage the filter conditions for what is selected from a given block data source.
Querries with union or minus will confuse forms as to the rowid and will no longer be albe to perform the default insert/update/delete, not knowing the rowid and the table to perform the dml on.
A from clause query will be the best way to change dynamically the tables you select from and also the where. But, by using that, if you wish to insert/update/delete, you will have to use on-insert/update/delete triggers where the processing will have to rely on some primary key columns and not on rowid.
Or, instead of a from-clause, you may use a view, but that will definitely be less flexible than a from clause query.

After placing a new text box in my document, typing new text, clicking away, then coming back to edit the text, I am unable to get my cursor to reappear within that text box. I can only select the box itself. I cannot select the text. Where is my cursor?

After placing a new text box in my document, typing new text, clicking away, then coming back to edit the text, I am unable to get my cursor to reappear within that text box. I can only select the box itself. I cannot select the text. Where is my cursor?

Even simpler than that.
Clicking once in a text box selects it.
Clicking once in a selected text box places the insertion point in the box.
The clicks do not need to be close enough in time to be read as a double click.
The same behaviour applies to table cells in Pages and in Numbers.
Regards,
Barry

When i click on a photo to edit, the photo doesn't show up and the area where the photo should show up is black. Why?

When i click on a photo to edit, the photo doesn't show up and the area where the photo should show up is black. Why? I can edit some photos, whereas others I can not.

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Where to edit the 'Document Browser' content in the Document Library 0.92

I want to add some functionality to the 'Document Browser' region of the Document Library0.92 packaged application.
I realize that this section/region is created from an AJAX call, based on the click of a file from get_all_docs file list on the left panel, but I cannot find any JS or template to make edits for this region.
I looked at doc_Browser_Init() and did not see anything right away, that might offer info on where to go. I also looked in the empty static files folder and I looked at APEX_DOCS.js and I see nothing in there either. I have asked on the Oracle forum and have gotten no response as well. I am able to make edits to all other template pages (and none of them need editing) but I am at a loss to know where to make edits for the center area generated from clicking a file in the Document Browser.
Any help appreciated.

Paul:
You are right that the middle content comes from an ajax call. The ajax call invokes the application process called GetDoc which in turn calls doclib.doc_detail(:DOC_ID,:app_user); -- passing the document that was clicked on and the current applicatioin user. If you want to make changes to the middle content area, you should edit the procedure doc_detail in the doclib package. You will need to download the package because it is too large to edit directly in the Object Browser. Make your edits locally in an editor and then recompile it, either using SQL*Plus (if you have local access to the db) or using SQL Workshop SQL Scripts function.
Hope that helps.
Regards,
Jason

I am using CS3 and want to save a file as a pdf where someone can then edit the text. How can I do this please? Thank you :)

I am using CS3 and want to save a file as a pdf where someone can then edit the text. How can I do this please? Thank you

You might be able to use the newest adobe reader program/application for that.
You would have to save your pdf out of photoshop cs3 without any text and then add the text to the pdf in adobe reader.
The text added in adobe reader can't be edited in photoshop, so the other people would have to adobe reader or acrobat to edit the text.
https://helpx.adobe.com/reader.html

I have thousands of photos. When I select a photo and edit it I want to return to the Organizer where I left off. I don't want to go to the most recent photo and have to find my way back to where I was. Is there a way to make this happen?

When I am in the Organizer and edit a photo I want to return to the Organizer where I left off. I don't see that as an option--it always returns me to the most recent photo. Is there a fix? Thank you.

Art,
I am trying to follow your very precise steps, and in my case (PSE11 also, Win7), the focus stays on the edited picture after I return from the editor to the Organizer. I am pretty sure that in the previous post describing your situation, I was able to reproduce the problem, but I don't remember on which version. I just tried in 'Folders' view mode to edit in a selected folder, then I clicked 'All media' so that no folder was selected. Same result in both cases.
Even if you prefer to work in folders view, you could take advantage of the ability to use 'albums'. It's a misleading word to describe a selection, a 'collection' of pictures, which you can sort as you want. It's a kind of 'playlist' like with music items. In the organizer, you can select a folder and create an album (even a temporary one) just by choosing 'create instant album'. Suppose you have made an album from a folder or a selection of highlighted pictures to edit. You can order them in date order, import batch or 'custom' order'. Since PSE12 you can also sort them in filename order. You should never lose the 'focus' on your last edited picture when coming back from the editor to the organizer. If the purpose of that album is only to help in organizing an editing session, you simply delete the album (the playlist) if you don't want to keep the list afterward.
I hope someone will be able to confirm how that can happen...
Edit;
I have just read Brian's post.
That may be the difference...

Where do you edit the MAIL connection doctor in 10.10.1

Current OS is 10.10.1
Product is MacBookPro3,1
Not able to send from email account (Telus.net) but able to receive.
Account deleted and reinstated but no difference in sending success.
Connection doctor shows multiple Outgoing Server settings which I believe are causing the
failure to send but I cannot find any way to edit the file or remove the duplicate or just plain wrong servers.

Thanks for the help however all that window shows are the Outgoing mail servers being queried. There are two of these outgoing mail servers that are not needed at all. I believe that the two addresses w the red dot in front of them need to be removed from the list of available servers. How do you find the file where these addresses are coming from? When I look in the outgoing mail servers (when editing the servers), the ones with the red dot preceding them are not listed as even being available but when the Con Doc is run, they are obviously loading from somewhere.
Suggestions?
Thanks
JT

It seems that photos are saved automatically after one makes changes. However, I cannot find the edited photograph! Where do they end up?

After I change the photo on IPhoto, only the original appears - don't know where to find the changed photo. Is it really automatic?
Thank you!
<E-mail Edited by Host>

How are you editing the photo? With iPhoto or a 3rd party editor?
With iPhoto the edited version replaces the orignal in both the thumbnail and large version. Once the photo is edited you can view both the editied version and original in the edit mode by depressing the Shift key to toggle between the two.
This is what you get when you try it:
Post back with what you use to edit.
OT

I was watching a episode of OCC and they showed the office where the production company does editing and administration

I was watching a episode of OCC and they showed the office where the production company does editing and administration.
I noticed that they were using software that allow them to use Date/Time stamp from the recording to edit multiple tracks of video. Not only that, but it seemed as though each track was being view in separate monitors.
OK... I know I'm pushing this one; but, does PE7 have any of these capabilities(IE. date/time stamp)?
I was seeking a quicker way to sync multiple tracks. The use of the audio on timeline is good, but there's got to be a better way.
Or does Adobe product another product that will do it all(IE, CS3)?
I really don't have it in budget to purchase another $1500 software package.

There is a 3rd party program, DVDate, that might be able to extract that data and display it.
Both PrPro and AfterEffects can add the runtime counter, but that is not quite the same as the date/time stamp.
As for multiple Source Monitors for multi-cam Projects, PrPro has that feature. The display on multiple "physical" monitors depends on one's video card, and also on video feeds via FireWire to a TV, but the feed to a TV will be only the Program Monitor Panel, not the multiple Source Monitors.
There are probably more people, who want to find a way to remove date/time stamps, that have been turned on in the camera. Nowadays, it's not quite like the old character-generator data, that appeared on many VHS camcorders, and also still cameras.
Good luck, and depending on your camera's metadata, DVDate might do part of what you want.
Good luck,
Hunt

I have a Windows Server 2008 R2 system. I am using Adobe Acrobat XI Pro. I am looking for the place where I can change the default font from Minion Pro to Calibri? Tools, Content Editing, Formatting

I have a Windows Server 2008 R2 system. I am using Adobe Acrobat XI Pro. I am looking for the place where I can Change the Default font from Miinion Pro to Calibri?
Tools, Content Editing, Formatting

You can't change it.
On Tue, Jan 13, 2015 at 11:22 AM, tonywaidmann <[email protected]>

Where to go and edit the existing link URL link name

Hi,
    I need to edit the existing link for our portal, please guide me where to go and edit the name of our url.
eg: current url is https://www.abc.eu/irj/portal    want to change it to
       new    url is https://www.abcdef.eu/irj/portal
regards,
Afzal.

Hi Afjal,
This link will help your requirement.
http://wiki.sdn.sap.com/wiki/display/EP/ChangePortalURL
Thanks & Regards,
cbr

@author - where does it read from? How do I edit the author?

The @author tag displays my initials. I would like to edit the information so that it displays my full name every time I create a new class.
How do I do that? Where is the information saved?
Thank you

I see what you have indicated... but where is the info for "user" coming from?
* @author ${user}
I know I can just type my name in there, but do you know where the current info is coming from?
When I create a new class I get:
* @author LV
Where is LV coming from?

Edit the clause where in a datablock

Similar Messages

Maybe you are looking for