Edit the trackers from a torrent file using vim.

Hi.
I constantly need to edit torrent files to change their trackers. So I wrote a vim plugin to handle this.
The plugin is at http://fma.if.usp.br/~kazuo/torrent.vba
You need hunnyb (in aur) OR bittorent (the original one, is in extra/bittorent) and a vim compiled with python.
To use simple install the vba and open a torrent file, in the buffer you see a list of trackers from the torrent file, edit it, one tracker per line with a leading space, and save it, its automatic regenerate the torrent file. (Dont touch the other lines in the buffer)
This is the first version, please try it and report back.
The buffer is somewhat more complicated than needed because I like to add other infos to be edited, so I'm using ConfigParser.
I hope its is useful to someone!
EDIT:
New version 0.5.5: Support for tiers. Now its do the correct with tiers, to separate a tier from other use a line containing a '.' (dot) with leading spaces, for example
[torrent]
trackers =
http://tracker.publicbt.com:80/announce
udp://tracker.publicbt.com:80/announce
http://tracker.thepiratebay.org/announce
udp://tracker.thepiratebay.org:80/announce
http://tracker.openbittorrent.com/announce
udp://tracker.openbittorrent.com:80/announce
0.5.6: Tiers now can be separated by empty lines (like utorrent tracker list)
Last edited by kazuo (2010-05-30 10:06:58)

I don't think you can because a Photoshop file (PSD) with layers will be flattened when you open up in Photoshop Touch.
I prepared a Photoshop file with one layer of image, one layer of text over a background using Photoshop CS6 on my Mac Pro and upload the PSD file onto Creative Cloud. I then open this file in Photoshop Touch (on iPad) but it comes out as a single flat layer merging all three layers. Hope this helps.
Below: 3 layers in Photoshop CS6 (with one layer of text)
Below: Flattened into one layer in Photoshop Touch..

Similar Messages

Photoshop touch can I edit the text from a psd file with that app ....

Can photoshop touch edit the text from a psd file from my iMac on my ipad with that app ....

I don't think you can because a Photoshop file (PSD) with layers will be flattened when you open up in Photoshop Touch.
I prepared a Photoshop file with one layer of image, one layer of text over a background using Photoshop CS6 on my Mac Pro and upload the PSD file onto Creative Cloud. I then open this file in Photoshop Touch (on iPad) but it comes out as a single flat layer merging all three layers. Hope this helps.
Below: 3 layers in Photoshop CS6 (with one layer of text)
Below: Flattened into one layer in Photoshop Touch..

Need to read data from pipe separated file using POJO?

Hi,
I need to read data from pipe separated file using POJO.
There is config.properties file which consists of the
data mapping.
Can you help me with sample code or help?
Regards
Regards
Taton
Edited by: Taton on Mar 7, 2009 4:41 PM

It's not possible to read from a file without using classes from the core API*. You'll have to get clarification from your instructor as to which classes are and are not allowed.
[http://java.sun.com/docs/books/tutorial/essential/io/]
*Unless you write a bunch of JNI code to replicate what the java.io classes are doing.

Removing non printable characters from an excel file using powershell

Hello,
anyone know how to remove non printable characters from an excel file using powershell?
thanks,
jose.

To add - Excel is a binary file. It cannot be managed via external methods easily. You can write a macro that can do this. Post in the Excel forum and explain what you are seeing and get the MVPs there to show you how to use the macro facility
to edit cells. Outside of cell text "unprintable" characters are a normal part of Excel.
¯\_(ツ)_/¯

How to retrieve IndividualStrings from a txt file using String Tokenizer.

hello can any one help me to retrieve the individual strings from a txt file using string tokenizer or some thing like that.
the data in my txt file looks like this way.
Data1;
abc; cder; efu; frg;
abc1; cder2; efu3; frg4;
Data2
sdfabc; sdfcder; hvhefu; fgfrg;
uhfhabc; gffjcder; yugefu; hhfufrg;
Data3
val1; val2; val3; val4; val5; val6;
val1; val2; val3; val4; val5; val6;
val1; val2; val3; val4; val5; val6;
val1; val2; val3; val4; val5; val6;
i need to read the data as an individual strings and i need to pass those values to diffarent labels,the dat in Data3 i have to read those values and add to an table datamodel as 6 columns and rows depends on the data.
i try to retrieve data using buffered reader and inputstream reader,but only the way i am retrieving data as an big string of entire line ,i tried with stringtokenizer but some how i was failed to retrive the data in a way i want,any help would be appreciated.
Regards,

Hmmm... looks like the file format isn't even very consistent... why the semicolon after Data1 but not after Data2 or Data3??
Your algorithm is reading character-by-character, and most of the time it's easier to let a StringTokenizer or StreamTokenizer do the work of lexical analysis and let you focus on the parsing.
I am also going to assume your format is very rigid. E.g. section Data1 will ALWAYS come before section Data2, which will come before section Data3, etc... and you might even make the assumption there can never be a Data4, 5, 6, etc... (this is why its nice to have some exact specification, like a grammar, so you know exactly what is and is not allowed.) I will also assume that the section names will always be the same, namely "DataX" where X is a decimal digit.
I tend to like to use StreamTokenizer for this sort of thing, but the additional power and flexibility it gives comes at the price of a steeper learning curve (and it's a little buggy too). So I will ignore this class and focus on StringTokenizer.
I would suggest something like this general framework:
//make a BufferedReader up here...
do
String line = myBufferedReader.readLine();
if (line!=null && line.trim().length()>0)
line = line.trim();
//do some processing on the line
while (line!=null);So what processing to do inside the if statement?
Well, you can recognize the DataX lines easily enough - just do something like a line.startsWith("Data") and check that the last char is a digit... you can even ignore the digit if you know the sections come in a certain order (simplifying assumptions can simplify the code).
Once you figure out which section you're in, you can parse the succeeding lines appropriately. You might instantiate a StringTokenizer, i.e. StringTokenizer strtok = new StringTokenizer(line, ";, "); and then read out the tokens into some Collection, based on the section #. E.g.
strtok = new StringTokenizer(line, ";, ");
if (sectionNo==0)
//read the tokens into the Labels1 collection
else if (sectionNo==1)
//read the tokens into the Labels2 collection
else //sectionNo must be 2
//create a new line in your table model and populate it with the token values...
}I don't think the delimiters are necessary if you are using end-of-line's as delimiters (which is implicit in the fact that you are reading the text out line-by-line). So the original file format you listed looks fine (except you might want to get rid of that rogue semicolon).
Good luck.

Can I manually edit the iTunes Music Library.xml file

Here's why.
Noticed on my Apple TV that there were a number of podcasts that when selected would say "Apple TV cannot play the current song".
Looked in iTunes and these podcasts are no where to be found. Did some searches in Spotlight and also, turned up zeros. Not found.
I then looked directly into my iTunes Music Library.xml file and sure enough there are the records.
What is odd is that the location of all the bad songs have a similar invalid path.
Bad path.
<key>Location</key><string>file://localhost/Volumes/iTunes/iTunes/iTunes%20Music/Podcasts/KQED/podcast.mp3</string>
Correct Path
<key>Location</key><string>file://localhost/Volumes/iTunes/Music/Podcasts/KQED'/podcast.mp3</string>
Now, all of these have dates that lead me to believe this was due to an iTunes upgrade back in September of 2005. It doesn't look like they are causing problems with iTunes itself. However, it is quite annoying for my Apple TV.
Question. Is there a different way to fix this than just manually removing the entries from the xml file?
I haven't tried to edit the iTunes Music Library.xml file just yet as I want to make I don't totally screw things up first.

I did some additional testing here and I deleted the track information from the iTunes Music Library.xml
On start up of iTunes, it does not add the deleted file back in. On the Apple TV, it still shows the bad file.
What I think that means is that even the Apple TV gets its playlist information from another source.
I have also started on another track which is to remove all of my podcasts from iTunes. Which I have now done.
The only ones left are these bad tracks that only show up in the iTunes Music Library.xml file and more importantly on my Apple TV.
I'd put this on the podcast or the Apple TV thread, but still believe this is an iTunes issue.

Uploading the data from a flat file into ztable

Hi,
I have a requirement where I have to upload the data from 2 flat files into 2 z tables(ZRB_HDR,ZRB_ITM).From the 1st flat file only data for few fields have to be uploaded into ztable(ZRB_HRD) .Fromthe 2nd flat file data for all the fields have to me uploaded into ztable(ZRB_ITM). How can I do this?
Regards,
Hema

hi,
declare two internal table with structur of your tables.
your flat files should be .txt files.
now make use of GUI_UPLOAD function module to upload your flatfile into internal tables.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename            = 'c:\file1.txt'
      has_field_separator = 'X'
    TABLES
      data_tab            = itab1
    EXCEPTIONS
      OTHERS              = 1.
use this function twice for two tables.
then loop them individually and make use of insert command.

Populate a table reading the data from a TXT file

how can I populate a table reading the data from a TXT file?
thanks

Hey Kevin!
Using FORMS.TEXT_IO to bulk load data from a file strikes me as re-inventing the wheel. It is just about justifiable in a self-service environment, but I regard the EXTERNAL TABLE is a better solution for that situation as well.
The same applies to UTL_FILE. I think the ability to read text with UTL_FILE is primarily intended for read file-based configuration or file manipulation/processing rather than data loading.
Re-writing a text file into SQL statements is too much like hard work (even with an editor that supports macro definition and regular expressions) for no real benefit. You lose all the bulk load peformance you would get from SQL*Loader. But for QAD I'd probably let you off with it.
You missed out one obvious alternative: using Java to turn the contents of an XML file into a CLOB and inserting it into a table which is read by a PL/SQL procedure that parses the XML records and insert the retrieved data into a table.
Stay lucky, APC

How to read a tab seperated data from a text file using utl_file

Hi,
How to read a tab seperated data from a text file using utl_file...
I know if we use UTL_FILE.get_line we can read the whole line...but i need to read the tab separated value separately.....
Thanks in advance...
Naveen

Naveen Nishad wrote:
How to read a tab seperated data from a text file using utl_file...
I know if we use UTL_FILE.get_line we can read the whole line...but i need to read the tab separated value separately.....If it's a text file then UTL_FILE will only allow you to read it a line at a time. It is then up to you to split that string up (search for split string on this forum for methods) into it's individual components.
If the text file contains a standard structure on each line, i.e. it is a fixed delimited structure, then you could use external tables to read the data instead.

Problem in the BDC program to upload the data from a flat file.

Hi,
I am required to write a BDC program to upload the data from a flat file. The conditions are as mentioned below:-
1) Selection Screen will be prompted to user and user needs to provide:- File Path on presentation server (with F4 help for this obligatory parameter) and File Separator e.g. @,#,$,%,... etc(fields in the file will be separated by using this special character) or fields may be separated by tab(tab delimited).
2) Finally after the data is uploaded, following messages need to be displayed:-
a) Total Number of records successfully uploaded.
b) Session Name
c) Number of Sessions created.
Problem is when each record is fetched from flat file, the record needs to be split into individual fields separated by delimiter or in case tab separated, then proceeding in usual manner.
It would be great if you provide me either the logic, pseudocode, or sample code for this BDC program.
Thanks,

Here is an example program, if you require the delimitor to be a TAB, then enter TAB on the selection screen, if you require the delimitor to be a comma, slash, pipe, whatever, then simply enter that value. This example is simply the uploading of the file, not the BDC, I assume that you know what to do once you have the data into the internal table.
REPORT zrich_0001.
TYPES: BEGIN OF ttab,
        rec TYPE string,
       END OF ttab.
TYPES: BEGIN OF tdat,
       fld1(10) TYPE c,
       fld2(10) TYPE c,
       fld3(10) TYPE c,
       fld4(10) TYPE c,
       END OF tdat.
DATA: itab TYPE TABLE OF ttab.
data: xtab like line of itab.
DATA: idat TYPE TABLE OF tdat.
data: xdat like line of idat.
DATA: file_str TYPE string.
DATA: delimitor TYPE string.
PARAMETERS: p_file TYPE localfile.
PARAMETERS: p_del(5) TYPE c.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
DATA: ifiletab TYPE filetable.
DATA: xfiletab LIKE LINE OF ifiletab.
DATA: rc TYPE i.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
    CHANGING
      file_table = ifiletab
      rc         = rc.
READ TABLE ifiletab INTO xfiletab INDEX 1.
IF sy-subrc = 0.
    p_file = xfiletab-filename.
ENDIF.
START-OF-SELECTION.
TRANSLATE p_del TO UPPER CASE.
CASE p_del.
    WHEN 'TAB'.
      delimitor = cl_abap_char_utilities=>horizontal_tab.
    WHEN others.
      delimitor = p_del.
ENDCASE.
file_str = p_file.
CALL METHOD cl_gui_frontend_services=>gui_upload
    EXPORTING
      filename = file_str
    CHANGING
      data_tab = itab.
LOOP AT itab into xtab.
    CLEAR xdat.
    SPLIT xtab-rec AT delimitor INTO xdat-fld1
                                     xdat-fld2
                                     xdat-fld3
                                     xdat-fld4.
    APPEND xdat to idat.
ENDLOOP.
LOOP AT idat into xdat.
    WRITE:/ xdat-fld1, xdat-fld2, xdat-fld3, xdat-fld4.
ENDLOOP.
Regards,
Rich Heilman

Any Tutorial / Sample to create Single PDF from multiple source files using PDF assembler in a watched folder process.

Any Tutorial / Sample to create Single PDF from multiple source files using PDF assembler in a watched folder process. I have a client application which will prepare number of source files and some meta data information (in .XML) which will be used in header/footer. Is it possible to put a run time generated DDX file in the watch folder and use it in Process. If possible how can I pass the file names in the DDX. Any sample Process will be very helpful.

If possible, make use of Assembler API in your client application instead of doing this using watched folder. Here are the Assembler samples : LiveCycle ES2.5 * Programming with LiveCycle ES2.5
Watched folder can accept zip files (sample : Configuring a watched folder to handle multiple input files and write results to a single folder | Adobe LiveCycle Blog ). You can also use execute script to create the DDX at runtime : LiveCycle ES2 * Application Development Using LiveCycle Workbench ES2
Thanks
Wasil

Is it possible to extract the contents of any PDF file using Adobe PDF SDK?

Is it possible to extract the contents of any PDF file using Adobe PDF SDK?
For Example: There is one pdf file. Let us say xxx.pdf with 32 pages. I am interested in only in a topic present at 10th page. Can I extract this information and save it into another pdf file (means new pdf file)?

Thanks Irosenth,
I am actually interested in extract the page and create a new PDF with that page. But still there is a catch that on which basis the page needs to extract either on PAGE number OR on Bookmark basis.
But here in this scenario assume I am looking for the PDF file, now I want to save only page 5. How can I extract page 5 automatically/programmatuically? Or in simple word how can I get the reference link of page 5?
Here I am not getting clear picture that Do I need both SDK Adobe & Acrobat to achieve this requirement. And more over you have mentioned that SDK itself is free. But on Adobe side it is mentioned that it is available by license only with this I have another doubt: To work my desktop/system application with Adobe PDF library, this library needs to distribute with the application. So in this case will it be chargeable for each and every deployment.
Could you please provide me the link from where I can download the SDK? So that I can do some excerise with SDK to figure out the exact flow of functionality to work with my application.

How to read a table from a word file, using HWPF

How can I read a table from a Word file using HWPF?
I looked in API and Table class doesn't seem to have a constructor... very very strange for me. pls help

the constructor is HWPFDocument = new HWPFDocument(/*file*/)
Here is the API for that
http://poi.apache.org/apidocs/org/apache/poi/hwpf/HWPFDocument.html
Also here is another link to something that might help you more with tables
http://www.aspose.com/Community/forums/thread/79182.aspx

Identify character from a jpeg file Using OCR

Hai all...
is there any way to identify characters from a jpg file using OCR related technologies..
i want to identify if thr any data in a page .the page is a jpg image contain lines.
is there any way plz help me..
very urgent..

Hai all...
is there any way to identify characters from a jpg
file using OCR related technologies..Yes
i want to identify if thr any data in a page .the
page is a jpg image contain lines.
is there any way plz help me..Get an Image Processing / OCR book for Java

How i can access and edit the table of database(.mdb) file through Labview

Dear sir,
I want to access and edit the table of database(.mdb) file through Labview and it should save.
please tell me how i can do it.
i am waiting for reply.
regards
Rajendra

there are options aplenty for this. First off, do you have the database connectivity toolset? If so, You can do it from there. Following the examples in labview. Or you can do a search for ADO or access database, and find plenty of VIs that can do this.
Paul <--Always Learning!!!
sense and simplicity.
Browse my sample VIs?

Edit the trackers from a torrent file using vim.

Similar Messages

Maybe you are looking for