Edit watch me do after recording and then integrate again
Hi All,
I am a new bee to Automator. I am trying to automate testing for an application whose UI controls, most often, are not identified by Automator. Therefore automator uses statements of the sort "UI element 1 of UI element 1 of scroll area 1 of......" and so on. Therefore, I cannot write these scripts on my own ( or please guide me if I can). So, I record an action which is a combination of steps. From this "watch me do" I drag out a step to see its script. Now I want to do similar things:
This records actions in a window names untitled1. I would like to edit this name in the script to "any title".extn (How can I do this?) Now I want to integrate this edited step back to its original location in watch me do.
TIA!
regards,
vb
Thanks a lot! Accessibility Inspector (AI) is what I was searching for. I thought of using the Dictionary of "Script Editor", but my application was not listed among scriptable apps there. Thanks for this.
Now the issue is the application does not expose any controls.
I am not sure how automator recognizes the controls while replay, but AI does not show any different names for the controls on stage. Moreover, on looking at the script recorded by Automator, I see all the elements named as UI element 1.
Now knowing the fact that elements are not identified, I tried using keyboard to complete actions. But automator does not recognize tab, return etc. Can I do this using scripts.
My previous questions still remain:
Can I edit apple script of a step in automator action and integrate it back to the action? If yes How?
And how can I edit the name of window in applescript of a step from say "untitled.rtf" to "*.rtf"
cheers,
vb
Similar Messages
-
I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks
Hi j2399123,
It sounds like your screen recording is doing what it was designed to do, capture what is happening on your screen, with optional voice over with the microphone.
Screen recording is for recording what you see on the screen, it is not a "video capture" option, like for capturing a movie with sound that is playing on your screen.
For the QuickTime recording options, check out "Recording with QuickTime Player" in
Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files
http://support.apple.com/kb/ht4024
And for screen recording specifically, there's
QuickTime Player 10.x: Record your computer’s screen
http://support.apple.com/kb/PH5882
Thank you for thinking of Apple Support Communities for your support needs.
Nubz -
Extensions like Ghostery, WOT or AdBlock stop working after two or three times. Restarting the webpage in a new tab the extensions will work again for several times and then stop again. Has anybody an explanation or a workaround for this bug in Safari 5?
Remove the extensions, redownload Safari, reload the extensions.
http://www.apple.com/safari/download/
And if you really want a better experience, use Firefox, tons more choices and possibilities there.
Firefox's "NoScript" will block the Trojan going around on websites. Best web security you can get.
https://addons.mozilla.org/en-US/firefox/addon/noscript/
Ghostery, Ad Block Plus and thousands of add-ons more have originated on Firefox. -
Can i delete a movie from my computer that i've previously purchased in itunes and then download again when I want to watch it? Seems like this would help me manage storage space.
Yes, provided the movie is still in the iTunes Store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer. -
I've an iPhone 3 and it happend for the first time yesterday. I had to shut down my phone for a theatershow, and when I started my phone again after the show, it constantly shut down and then started again... Is there a way to delete something or something? 'cause it's very annoying! Already thanks!
Your contacts should still be on whatever program you sync your iphone to (i.e. Outlook, address book).
The iphone is not a stand alone device. It is designed to be synced with a computer. If you have not been syncing with a compatible program, then you are out of luck. Your contacts are not included in the back-up because it is meant to be synced with your computer.
"Although iTunes backs up most of your iPhone and iPod touch settings, downloaded applications, and other information (Contacts, calendars, notes, images in the Camera Roll), your audio, video, and photo content are not included in the backup."
http://support.apple.com/kb/HT1414 -
After I did a change in the drumsection on a song the program just "went down". It's impossible to go back tinto the program. It just tryn to open the song, nothing happend and then out again... What can I do?
see if anything in this troubleshooting article helps: http://support.apple.com/kb/HT2801?viewlocale=en_US
-
Why doesnt the DVD version of iworks work, after uploading (and then deleting) the trial version?
why doesnt the DVD version of iworks work, after uploading (and then deleting) the trial version?
Check out this discussion in the iWork forum. Yvan's AppleScript (about 6 messages down) will solve your problem.
-
Hi I am trying to access my iphone notes from my desktop and they are not transfered? how do i transfer them? It is working the other way around - until I edit a note on my phone and then it is lost on my desktop? Help!
http://support.apple.com/kb/HT1296
-
I get the following error after the installation and configuration window of MS Project: "There is not enough memory to complete the operation. To free up available memory, close programs, projects, or windows you aren't using, and then try again."
It happens both with MS Project 2010 and 2013 on a Windows 7 desktop.
I tried installing / uninstalling Office 2010, MS Project, tried installing 32 and then 64 bit versions, clean up, disk error checker, startup changes (msconfig), anti virus, running as Windows 7 and then Windows XP compatible mode.
Nothing helps. I see this issue reported as early as 2007 version of MS projects on Microsoft forums, but I do not see any solution anywhere. Any suggestions on how to fix the issue without having to reformat hard drive? Every other application, including
all other Office programs work seamlessly.
I also tried Microsoft support, after an hour and a half of basically doing what I did before, I was told I have to pay 99$ for "premium" support, so someone can look at this bug.
I have 16 Gb RAM and more than 200Gb or hard drive free, so actual memory is not the problem.This issue was originally reported with MS Project 2007 and keeps popping up since.
A quick Google search provides more than 200K pages of results of this issue:
https://www.google.ca/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=There+is+not+enough+memory+to+complete+the+operation.+To+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren't+using%2C+and+then+try+again.
And 193K results on Bing:
http://www.bing.com/search?q=There+is+not+enough+memory+to+complete+the+operation.+To+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren%27t+using%2C+and+then+try+again.&go=Submit&qs=n&form=QBLH&pq=there+is+not+enough+memory+to+complete+the+operation.+to+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren%27t+using%2C+and+then+try+again.&sc=0-0&sp=-1&sk=&cvid=4cb023c1fbd94ec2bba9821b095f21f2
Computer was defragged already. I run more tests, and specifically when MS Projects tries to run, it tries to take all memory, more than 300Gb, on the computer. (DropBox was running at the same time, and warned that there were no space. As soon as MS Project
stopped attempting to configure itself, everything came back to normal and the available space became available again.)
Looking through older forum posts, looks like this application tries to take "unlimited" amount of memory. Some registry fixes are mentioned potentially, but I was not able to apply them.
Since everything else works, this is a MS Project bug reported by multiple users on various versions of Windows, including Vista and 7, so please provide a fix and not 'not a know bug' lie. All the premium support will say, is to format the hard drive, unless
they have a patch or a registry edit solution. If the latter is true, since the issue exists for multiple years, it should have been already been provided to users.
Also, I am not running a SQL server, or any server, this is an installation on a local machine. -
'"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message keeps displaying whenever I try to open any Adobe CS5 applications (except for Adobe Acrobat Pro). It displays until I click "OK" about 15-20 times or so and then will finally let my program open.
I have tried deleting files within my Library/Preferences folder and turning off/deleting login items within my system preferences as other forums suggested but nothing happened. Spending 3.5 hours on the phone with Adobe and completely uninstalling and then reinstalling the entire CS5 Master Collection didn't work either.
Also, it may be helpful to know that my programs worked fine for about three weeks then when we got internet and changed the password (the join, not the adminstrative password) with the wireless network "ScubaSteve" (which I've used with no problems at my old apartment) it started acting up. I have never seen "rrnas01" before so I don't know at all where it came from. I also installed the free 30 day trial of Suitcase Fusion 3 recently, but thinking that could also be the cause I have uninstalled it, and still no help.
Please help me! And please keep in mind I don't know all the computer lingo that a lot of the people in these forums seem to know. Thanks in advance for ny help you can give me.It may not be possible .. there is a major bug between Mountain Lion and the TC where the TC disk goes off the radar of the computer.
Lion is also affected but not as badly.
7.6.4 seems worse than earlier firmware.. so back to 7.6.1 or 7.5.2 if that is possible.
Obviously that is not a solution for a later Gen5 TC.
Reset to factory after the firmware downgrade. .use all network names that are short, no spaces and pure alphanumeric.
If the TC is the main router set the dhcp to a very short lease time.. eg 30min.. and see how it goes, or try a longer lease like 99days.
I prefer the very short lease but response has been mixed.
Use ethernet not wireless.. ethernet is always more reliable and stable than wireless.
And last .. a nightly electric timer that powers off every night at midnight for 1min.. would not be the first device we have suggested a fix that amounts to beat the unit to the punch by forcing it to reboot since it is unstable. -
The following error pop's up as an [OK] dialogue box after logging in the iMac,
There was a problem connecting to the server "Time Capsule".
The share does not exist on the server. Please check the share name, and then try again."
As it happens, a connection to the Time Capsule is established usually, anyway. On occasion it doesn't.
I have a Volume, Data, on the capsule, which similarly, usually mounts, but occassionally doesn't, with access permissions denied.
Any suggestions on how begin to work out how to achieve networking seamlesness?First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
From the menu bar, select
▹ System Preferences ▹ Network
Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click Renew DHCP lease.
Try again to back up.
If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back. -
Hello everyone,
I recently bummed into an error message when I want to deploy a service template.
Setup:
1 HyperV server on win2k12 r2
1 SCCM VMM 2k12r2 on the hyperv server
1 template with all the objects in the library
Error:
When I deploy the the service template I get the below error message.
22591
The specified computer name (%ComputerName;) is already in use by another virtual machine or by a virtual machine configuration object.
Ensure that the computer name is unique in the VMM environment, and then try again.
The issue is that I can't find it anywhere, not on my domain controller not on my dns server as a record and also not as a vm in sccm or in powershell when doing get-vm. So where do I need to remove it ( no it is not an option to create a new Hostname for
this service template ).
AndreThere could be a couple things happening.
One - you have a Service Template, it defines %Computername% as a variable. And you have deployed this Template once using 'foo' and you are deploying it again as 'foo' without deleting the previous instance.
Two - you hardcoded the computer name into the template.
Three - you are scaling out and you have hit the bug that the wizard does not increment the machinename if you have something like computername## where SCVMM should be incrementing the machine name.
Windows does not support identically named machines (you can't have two machines on the same network with the same computer name - they broadcast their name and the 'second' one shuts down its network stack). In support of this SCVMM also enforces
this rule.
And with any templates SCVMM is in charge of machine names at deployment.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat. -
I am unable to download photos from my iphone4 , SD card , SLR camera to my ipad2 using apple accessories , please help , it has worked once and then never again.
Plumchunks-
The only accessory I know of that can be used to transfer photos from a camera or SD card to the iPad, is the Apple Camera Connection Kit. The kit consists of two adapters. One has an SD card socket. The other has a USB connector to connect directly to the camera.
I do not think you can transfer photos from the iPhone to the iPad unless you first transfer them to a computer. If you then transfer the photos to an SD card, they must have eight character names plus suffix and be stored in a DCIM folder, just as if they came from a camera.
One thing you can try is to reboot the iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. The iPad will restart after a couple of minutes. Rebootting will not hurt anything and sometimes clears up mysterious problems.
Fred -
Since upgrading to Yosemite on my iMac I am frequently getting "safari can't open the page (blank) because the server unexpectedly dropped the connection this sometimes occurs when the server is busy. wait and then try again". This is with both a WiFi and Ethernet connection. The server is working fine from other devices using WiFi onto it such as iPhones, iPads, MacBook (which is also on Yosemite) so don't believe its an issue with the server.
I am also noticing page load very slowly when this problem is not occurring.Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
Sometimes my ipod nano will have a voice announcement of the name of the song playing after the song starts and then skip to the next song in line and then repeat the announcement and then skip, again and again....
Sounds like VoiceOver has been activated. See this article for instructions on how to turn it off.
iPod nano (6th generation): How to use VoiceOver
B-rock
Maybe you are looking for
-
BDC program is not working in BI Production.
Dear All, My BDC program for RSA1 is working fine in BI Development, but it is not working in BI Production. I have debug the BDC program and found that data is coming from the excel file. Then why it is not working. Please help me. Thanks, With rega
-
How to use a connection ODBC in crystal reports viewer?
Hi Guys! I need to know if for update a report in crystal reports viewer, is necessary, have a connection SAP Business Objects Business Intelligence. How to use a connection ODBC in crystal reports viewer?
-
Error invoking WebService in Eclipse with WebLogic 12c plugin
I am using Eclipse Indigo with WebLogic 12c plugin to create a standalone WebService Client which invokes a simple WebService. The WebService is protected by Security Policies Wssp1.2-2007-Wss1.0-X509-Basic256.xml and Wssp1.2-SignBody.xml. I get the
-
Upload data eCATT in ECC6 vs 4.7
HI There, I uploaded MM data in ECC6 before by using CATT (record scripts and load in configuration) but yesterday I was using someone's 4.7 IDES and surprisingly stuck. Scenario: In Ecc6 After recording script, creat test configuration and on varian
-
I recently grabbed my jam pack remix folder from one computer. stuck it on a dvd and dropped it into the loops browser on another computer. The regular sound files work fine, and the midi-files sound fine in the preview window, but when I drag and dr