Editing fields in iTunes

Is it possible to use the "Find and replace" command in Music lists in iTunes to edit multiple lines in one procedure ?
Thanks for your help
Gerard

Apple users and support are terrible. If this was a problem with a Microsoft product there'd be hundreds of people willing to help.

Similar Messages

Unable to capture context attributes of editable fields

Hello All,
In my application, there are two trans. containers. One holds set of material info fields at top and in the bottom the container holds a table with quantity data of the material.
The material info container has a edit button and 3 fields are editable and saved from the container. In the bottom container there is button to move to next material. Before moving, I check if any data is changed in material info container and display pop up to save it.
Now, when i click the save button in the mat info container the ediatbel fields data is passed and gets saved. But, when the same save method is called from the confirmation pop up in the bottom container table the editable fields data is not passed. No idea on the reason behind this behaviour.
The code used to retrieve the data is
nd_vipos_mat_master->get_static_attributes(
            IMPORTING
              static_attributes = lr_vipos_mat_info ).
Kindly assist.
Regards,
Sharath

Hi ,
When you are saving data using popup, you must have subscribed an action with popup button. I hope it is not the same action which you are using with SAVE button.
You can try subscribing the same action for popup which you used in Save button. Ex: if on saving directly, you are calling action "OnSave" and from popup, the triggered action is "OnActionSaveFrom Popup". So dont use this new action while subscription with popup button. use "OnSave" with popup button also.
if it is working with save button, it should be fine with popup also.
Thanks
Vishal

Editable fields in oracle report

Hi,
I am hoping someone can help what I am trying to create is a PDF oracle report with an editable field at the end of the report. The user would use this field to type comments about the report and then save the file with the comments attached.
I did a search but couldn't really find anything relevant apart from this thread here: Re: How to add to report in pdf format editable fields but it looks like that was never answered.
Users have access to Adobe Acrobat so an alternative solution could be just to create a rectangle and tell the users to write in that but it is not an ideal solution.
If it is not possible in oracle reports we are also licensed for BI Publisher but as of yet I haven't been able to find anything that would do this using that tool either.
Regards,
Chad

with an editable field at the end of the report.In Reports the user cannot add text after generation of the report. So, do it before generating the report. Add a parameter p_comment to the data model and add this to the parameter form (or whatever form you use to call the report, e.g. from Forms) and create a text field at the end of the report.

To capture the selected rows along with edited field contents in alv report

Dear All,
         I do have requirement where, in alv report output one field is editable and need to save the content of the edited field along with the selected rows.
         For example If there are 10 records displayed in the alv output with 20 fields.
Out of this 20 fields one field (say XYZ) is editable. Also i have already created a new pushbutton (say ABC) on alv output. Now in the alv output if we maintain some value in the field (XYZ ) for the 2nd and 4th record and select this two records, and when clicked on the pushbutton (ABC) it has to update the DB table.
      I am using the Func Module 'REUSE_ALV_GRID_DISPLAY'.
      Your early reply with sample code would be appreciated.
Thanks in Advance.

HI Naveen ,
There is an import parameter "i_callback_program" in the function module,
plz pass the program name to it.
Capture the command by passing a field of type sy-ucomm to "I_CALLBACK_USER_COMMAND ". Check the returned command and
and program a functionality as desired.
u can try the event double_click or at line selection. there u can use READLINE command to c if the line has been selected.
In case it is , process the code segment.
Regards
Pankaj

EDIT field in ALV GRID and on SAVE it has to update the DB Table

Hi Experts,
I have searched lot of forums...
But i had not got the exact solution for this...
I have multiple records that displayed in the ALV output screen and i had modified more than one record and then click on save.
It has to modify all the lines that i had changed in the EDITABLE FIELD.
Can any one help me in doing so...
Sample code will be more help full....
Thanks in advance,
Kruthik

Hi Kruthik
Check [=> OO ALV Event DATA_CHANGED <= |http://abaptips.com/?p=70], hope you will get idea.
Please reply in case of any confusion.
Thanks and Best Regards,
Faisal

Editable field in alv

hiii
when doing editable field in alv
you set
i_fieldcat-edit = C_X
i_fieldcat-input = C_X
P_selfield-refresh = C_X
this is not working when i click on save the internal table is not keeping the change i have edit on the screen and the p_selfield value also has still the old value.
but when i double click the p_selfield is keeping the editable value. Please advise ??

hi,
Check out this sample program.The part for 'EDIT' is in Bold..
report zalv_color_display_edit.
type-pools: slis.
tables : zcust_master2.
types : begin of wi_zcust_master2,
        zcustid like zcust_master2-zcustid,
        zcustname like zcust_master2-zcustname,
        zaddr like zcust_master2-zaddr,
        zcity like zcust_master2-zcity,
        zstate like zcust_master2-zstate,
        zcountry like zcust_master2-zcountry,
        zphone like zcust_master2-zphone,
        zemail like zcust_master2-zemail,
        zfax like zcust_master2-zfax,
        zstat like zcust_master2-zstat,
        field_style type lvc_t_styl,
end of wi_zcust_master2.
data: it_wi_zcust_master2 type standard table of wi_zcust_master2
                                                 initial size 0,
      wa_zcust_master2 type wi_zcust_master2.
data: fieldcatalog type slis_t_fieldcat_alv with header line.
data: it_fieldcat type lvc_t_fcat,
      wa_fieldcat type lvc_s_fcat,
      gd_tab_group type slis_t_sp_group_alv,
      gd_layout    type lvc_s_layo,     "slis_layout_alv,
      gd_repid     like sy-repid.
start-of-selection.
perform data_retrieval.
perform set_specific_field_attributes.
perform build_fieldcatalog.
perform build_layout.
perform display_alv_report.
form build_fieldcatalog.
wa_fieldcat-fieldname   = 'ZCUSTID'.
wa_fieldcat-scrtext_m   = 'CUSTOMER ID'.
wa_fieldcat-col_pos     = 0.
wa_fieldcat-outputlen   = 10.
append wa_fieldcat to it_fieldcat.
clear wa_fieldcat.
wa_fieldcat-fieldname   = 'ZCUSTNAME'.
wa_fieldcat-scrtext_m   = 'CUSTOMER NAME'.
wa_fieldcat-col_pos     = 1.
append wa_fieldcat to it_fieldcat.
clear wa_fieldcat.
wa_fieldcat-fieldname   = 'ZADDR'.
wa_fieldcat-scrtext_m   = 'ADDRESS'.
wa_fieldcat-col_pos     = 2.
append wa_fieldcat to it_fieldcat.
clear wa_fieldcat.
wa_fieldcat-fieldname   = 'ZCITY'.
wa_fieldcat-scrtext_m   = 'CITY'.
wa_fieldcat-col_pos     = 3.
append wa_fieldcat to it_fieldcat.
clear wa_fieldcat.
wa_fieldcat-fieldname   = 'ZSTATE'.
wa_fieldcat-scrtext_m   = 'STATE'.
wa_fieldcat-col_pos     = 4.
append wa_fieldcat to it_fieldcat.
clear wa_fieldcat.
wa_fieldcat-fieldname   = 'ZCOUNTRY'.
wa_fieldcat-scrtext_m   = 'COUNTRY'.
wa_fieldcat-col_pos     = 5.
append wa_fieldcat to it_fieldcat.
clear wa_fieldcat.
wa_fieldcat-fieldname   = 'ZPHONE'.
wa_fieldcat-scrtext_m   = 'PHONE NUMBER'.
wa_fieldcat-col_pos     = 6.
wa_fieldcat-edit        = 'X'. "sets whole column to be editable
append wa_fieldcat to it_fieldcat.
clear wa_fieldcat.
wa_fieldcat-fieldname   = 'ZEMAIL'.
wa_fieldcat-scrtext_m   = 'EMAIL'.
wa_fieldcat-edit        = 'X'. "sets whole column to be editable wa_fieldcat-col_pos     = 7.
wa_fieldcat-outputlen   = 15.
wa_fieldcat-datatype     = 'CURR'.
append wa_fieldcat to it_fieldcat.
clear wa_fieldcat.
wa_fieldcat-fieldname   = 'ZFAX'.
wa_fieldcat-scrtext_m   = 'FAX'.
wa_fieldcat-col_pos     = 8.
wa_fieldcat-edit        = 'X'. "sets whole column to be editable
append wa_fieldcat to it_fieldcat.
clear wa_fieldcat.
wa_fieldcat-fieldname   = 'ZSTAT'.
wa_fieldcat-scrtext_m   = 'STATUS'.
wa_fieldcat-col_pos     = 9.
append wa_fieldcat to it_fieldcat.
clear wa_fieldcat.
endform.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
      Build layout for ALV grid report
form build_layout.
Set layout field for field attributes(i.e. input/output)
gd_layout-stylefname = 'FIELD_STYLE'.
gd_layout-zebra             = 'X'.
endform.                    " BUILD_LAYOUT
*&      Form DISPLAY_ALV_REPORT
      Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
call function 'REUSE_ALV_GRID_DISPLAY_LVC'
    exporting
      i_callback_program = gd_repid
      is_layout_lvc      = gd_layout
      it_fieldcat_lvc    = it_fieldcat
      i_save             = 'X'
    tables
      t_outtab           = it_wi_zcust_master2
    exceptions
      program_error      = 1
      others             = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    " DISPLAY_ALV_REPORT
*&      Form DATA_RETRIEVAL
      text
--> p1        text
<-- p2        text
form data_retrieval .
data: ld_color(1) type c.
select zcustid zcustname zaddr zcity zstate zcountry zphone zemail
zfax zstat up to 10 rows from zcust_master2 into corresponding fields of
table it_wi_zcust_master2.
endform.                    "data_retrieval
*&      Form set_specific_field_attributes
      populate FIELD_STYLE table with specific field attributes
form set_specific_field_attributes .
data ls_stylerow type lvc_s_styl .
data lt_styletab type lvc_t_styl .
Populate style variable (FIELD_STYLE) with style properties
The following code sets it to be disabled(display only) if 'ZFAX'
is NOT INITIAL.
loop at it_wi_zcust_master2 into wa_zcust_master2.
    if wa_zcust_master2-zfax is not initial.
      ls_stylerow-fieldname = 'ZFAX' .
      ls_stylerow-style = cl_gui_alv_grid=>mc_style_disabled.
                                      "set field to disabled
      append ls_stylerow to wa_zcust_master2-field_style.
      modify it_wi_zcust_master2 from wa_zcust_master2.
    endif.
endloop.
endform.                    "set_specific_field_attributes
Hope this helps you,
Arunsri

Editable field in ALV does not accept negative sign values

Hi guys,
We have an editable field in ALV but it does not accept negative sign,,, it is causing an error... We need to input a negative value in that editable field...
How to handle this?
Thanks!

Hi Mark,
This topic has been just discussed at this thread:
Problem with OO ALV
Regards,
Chandra Sekhar

Editable field in alv tree output using cl_gui_alv_tree

Hi,
i need Editable field with F4 help in alv tree output using cl_gui_alv_tree.
regards,
Naresh

sadly, this is not possible. An ALV Tree cannot by editable.
Regards

Editable field in alv list display

i WANT TO GIVE COLOR FOR EDITABLE FIELD IN ALV LIST DISPLAY.i TRIED WITH EMPHASIZE IN FIELD CATALOGUE ASSIGNING.bUT,IT IS NOT WORKING.HOW TO DO.tHANX IN ADVANCE.........

HI,
Please refer the link below:
http://www.****************/Tutorials/ALV/Edit/demo.htm
http://www.****************/Tutorials/ALV/ColorSALV/Demo.htm
Thanks,
Sriram Ponna.

Editable field in alv data format

i have a editable field on ALV which is of date format and i need when user enter a date the value will be updated in the database table .
note that i am using alv list and the field catalog is of date format dat 8
the update is not done pleaseee helppp urgent

Hi,
You need to use the USER_COMMAND in the ALV function module
{CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = gd_repid
i_callback_user_command = 'USER_COMMAND'
i_callback_pf_status_set = 'GUI_STAT'
*i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
*it_special_groups = gd_tabgroup
*it_events = it_events
i_save = 'X'
*is_variant = z_template
TABLES
t_outtab = i_final
EXCEPTIONS
program_error = 1
OTHERS = 2.
then you need to write the below FORM
* FORM USER_COMMAND *
* --> U_COMM *
* --> RS_SELFIELD *
FORM user_command USING u_comm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.}
Here in the Form, Write the UPDATE statment to update the database table
Regards
Sudheer

Interactive report with checkbox and editable field

Hi,
For a project I'm working on I need to create a interactive report in Apex 3.2 with the ability to select lines and to modify one of the columns in the report.
To do this, I started off by adding these two fields to the selection query of my IR:
apex_item.checkbox(1, product_number) cb
and
apex_item.text (2,QTY_TO_ORDER) QTY_TO_ORDER
cb is the checkbox files, and QTY_TO_ORDER is the editable field.
That worked like a charm and I got my two fields in the report.
To process the values, I added this page process, wich for now should only store the "product number" and "QTY_TO_ORDER" fields in a table.
BEGIN
FOR i in 1..APEX_APPLICATION.G_F01.count LOOP
insert into mytmptable values (APEX_APPLICATION.G_F01(i),APEX_APPLICATION.G_F02(i));
END LOOP;
commit;
end;
However, this doesn’t work the way I want it to work. When I check the checkboxes of two rows, it will store two rows with the right product numbers, but it will take the top two QTY_TO_ORDER field of the table regardless of which ones are checked. I was able to solve this problem, by adding a rownum to the query and using the rownum as the value for the checkbox. Since I still need the product_number and qty_to order fields I made them both text fields.
I changed my page process to:
BEGIN
FOR i in 1..APEX_APPLICATION.G_F01.count LOOP
insert into mytmptable values (APEX_APPLICATION.G_F02(APEX_APPLICATION.G_F01(i)),
APEX_APPLICATION.G_F03(APEX_APPLICATION.G_F01(i)));
END LOOP;
commit;
end;
This seemed to solve the problem, and I now got the right values in the table, unless I used sorting in the report... As soon as I sorted the report in a way different than by rownum, I got the wrong values in the table. The reason for this is of course that my insert just selects the nTh row from the table, and my rownums aren't dynamic.
I've found a lot of examples on the internet using '#ROWNUM#' in the selection, which should dynamically generate a rownum in the report. This seems to work in normal report, but in a interactive reports, the literal values '#ROWNUM#' shows up.
Is there any way to solve this issue?

Hi,
Try with 3 fields:
apex_item.checkbox(1, product_number) cb,
apex_item.text (2,QTY_TO_ORDER) QTY_TO_ORDER,
apex_item.hidden(3, product_number) prod_no
The hidden field should be display as a hidden column.
Then your process can be:
BEGIN
FOR i in 1..APEX_APPLICATION.G_F01.count LOOP
FOR j in 1..APEX_APPLICATION.G_F03.count LOOP
IF APEX_APPLICATION.G_F01(i) = APEX_APPLICATION.G_F03(j)) THEN
insert into mytmptable values (APEX_APPLICATION.G_F01(i),APEX_APPLICATION.G_F02(j));
exit;
END IF;
END LOOP;
END LOOP;

SharePoint2010 XSLT list view web part change link to edit field

As Highlighted in image there is XSLT list view webpart and I want to change the edit field link to EditFormAdmin.ASPX form against particular Item ID.
Please suggest me how to implement it.
Thanks and Regards, Digambar Kashid

You can always change the editform.aspx for whole list using below:
http://office.microsoft.com/en-in/sharepoint-designer-help/create-a-custom-list-form-HA010119111.aspx
http://office.microsoft.com/en-in/sharepoint-designer-help/create-a-custom-list-form-using-sharepoint-designer-HA010378258.aspx
You cannot change it for a particular item in list
If this helped you resolve your issue, please mark it Answered

HT1918 I'm having some issues trying to change my account billing---I have a new debit card and i need to punch in the new number but when i go to edit my info itunes says my 'session has timed out.' i've logged in and out more than once. what's the probl

i'm having some issues trying to change my account billing---I have a new debit card and i need to punch in the new number but when i go to edit my info itunes says my 'session has timed out.' i've logged in and out more than once. what's the problem?

Try to change the credit information from your iphone or other ios device. Tap on settings > store > tap Apple ID > tap view account > tap payment information > change

HOW TO READ THE EDITABLE FIELD IN ALV

CAN ANYONE HELP ME IN READING THE EDITABLE FIELD IN ALV.
I AM DOING THE FOLLOWING.
BUT STILL THE EDITABLE FIELD IN NOT READ.
WHEN 'EXE' OR 'EXEC'.
LOOP AT I_RB1 INTO L_WA_STRU.
L_WA_STRU-LIFSK = L_WA_STRU-LIFSK1.
MODIFY I_RB1 FROM L_WA_STRU.
CLEAR L_WA_STRU.
ENDLOOP.
I_RB1 IS MY TABLE WHICH I PASSED IN TABLES OF REUSE_ALV_GRID_DISPLAY.LIFSK1 IS MY EDITABLE FIELD.
AND LIFSK IS THE FIELD WHERE THE DATA SHOULD GET TRANSFERRED WHEN I HIT EXECUTE BUTTON.

DATA: lt_display LIKE TABLE OF gt_display.
REFRESH lt_display.
CLEAR lt_display.
lt_display[] = gt_display[].
CLEAR ref_grid.
IF ref_grid IS INITIAL.
    CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
      IMPORTING
        e_grid = ref_grid.
ENDIF.
IF NOT ref_grid IS INITIAL.
    CALL METHOD ref_grid->check_changed_data.
ENDIF.
IF lt_display[] NE gt_display[].
    gv_tosave = 'X'.
ENDIF.
Check this program. It will help you.
awrd points if helpful
Bhupal

Error when trying to set a date type edit field

Hi all
I have an edit text field in a form which is bounded to a date type
database field using dbDataSource.
When i try to set the edit text field value with Today's date by code.
I recieve an error message that the value which
i'm trying to set is not legal. the error number is [131-183].
I use the following code to set the edit field:
If oEditText.Value.Trim = String.Empty Then
            Dim strDate As String
            Dim sboBob As SAPbobsCOM.SBObob =
             oCompany.GetBusinessObjec(SAPbobsCOM.BoObjectTypes.BoBridge)
             rs = sboBob.Format_DateToString(Microsoft.VisualBasic.Today)
           strDate = rs.Fields.Item(0).Value.ToString().Trim()
Try
       oEditText.Value = strDate
Catch ex As Exception
    SBO_Application.MessageBox("error setting
current date: " & ex.Message)
End Try
End If
My question is how can i set the edit field with a valid value?

Hi!
When writing to EditText.Value you must always use the B1 "DB-Format" as String.
The following examples are assuming (it's a must!) that the EditText-Fields are bound to a corrosponding DataSource (Type Date, Price etc...)
MyDateEditTxt.Value="20080207"
MyPriceEditTxt.Value="1341.79"
The best of it: It's Windows and SBO-GUI-Language independent.
EditText.String must always be written with the format of the actual Language of the SBO-GUI, which can be changed by the user....
You may also have a look at my statements regarding these problems near the end of this thread:
[How to pass date value to an UDF;
Cheers,
Roland

Editing fields in iTunes

Similar Messages

Maybe you are looking for