Unable to capture context attributes of editable fields

Hello All,
In my application, there are two trans. containers. One holds set of material info fields at top and in the bottom the container holds a table with quantity data of the material.
The material info container has a edit button and 3 fields are editable and saved from the container. In the bottom container there is button to move to next material. Before moving, I check if any data is changed in material info container and display pop up to save it.
Now, when i click the save button in the mat info container the ediatbel fields data is passed and gets saved. But, when the same save method is called from the confirmation pop up in the bottom container table the editable fields data is not passed. No idea on the reason behind this behaviour.
The code used to retrieve the data is
nd_vipos_mat_master->get_static_attributes(
            IMPORTING
              static_attributes = lr_vipos_mat_info ).
Kindly assist.
Regards,
Sharath

Hi ,
When you are saving data using popup, you must have subscribed an action with popup button. I hope it is not the same action which you are using with SAVE button.
You can try subscribing the same action for popup which you used in Save button. Ex: if on saving directly, you are calling action "OnSave" and from popup, the triggered action is "OnActionSaveFrom Popup". So dont use this new action while subscription with popup button. use "OnSave" with popup button also.
if it is working with save button, it should be fine with popup also.
Thanks
Vishal

Similar Messages

ALV issue - capturing user changes in editable fields using custom button?

Hi,
I created a custom button in ALV tool bar.   And also in my ALV grid I have couple of fields Editable option. User can change values for these 2 fields.
My question is -
After changing values for these editable fields(more than 1 record) , user will click on custom button and then I have to update all the user changed values in to my internal table(lt_tab) and then I have to process logic.
Problem is when user click on Custom button in ALV tool bar it is not having the changed values in lt_tab table.
Only when user clicks some thing on ALV grid records or fields then it is getting all the changed values in to lt_tab.
Can any one tell me how I can get changed values when user clicks on custom button?
1. Can we place custom button in ALV Grid? instead of ALV tool bar?
or
How I can capture user changes when they click on custom button?
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
TABLES
      T_OUTTAB                          = lt_tab
Please check this logic-
CASE r_ucomm.
    WHEN '&IC1'.
- It_tab having all changed field values
WHEN 'custom button'.
      lt_tab - not having any changed values - showing all initial lt_tab values.
I highly appreciate your answers on this.
Thanks.
Rajesh.

Hi,
Use this code, its working:-
*&      Form ALV_DISPLAY
*       SUB-ROUTINE ALV_DISPLAY IS USED TO SET THE PARAMETERS
*       FOR THE FUNCTION MODULE REUSE_ALV_GRID_DISPLAY
*       AND PASS THE INTERNAL TABLE EXISTING THE RECORDS TO BE
*       DISPLAYED IN THE GRID FORMAT
FORM alv_display .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
*     I_INTERFACE_CHECK                 = ' '
*     I_BYPASSING_BUFFER                = ' '
*     I_BUFFER_ACTIVE                   = ' '
     i_callback_program                = v_rep_id       " report id
     i_callback_pf_status_set          = 'PF'           " for PF-STATUS
     i_callback_user_command           = 'USER_COMMAND' " for User-Command
*     I_CALLBACK_TOP_OF_PAGE            = ' '
*     I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
*     I_CALLBACK_HTML_END_OF_LIST       = ' '
*     I_STRUCTURE_NAME                  =
*     I_BACKGROUND_ID                   = ' '
*     I_GRID_TITLE                      =
*     I_GRID_SETTINGS                   =
     is_layout                         = wa_layout      " for layout
     it_fieldcat                       = it_field       " field catalog
*     IT_EXCLUDING                      =
*     IT_SPECIAL_GROUPS                 =
     it_sort                           = it_sort        " sort info
*     IT_FILTER                         =
*     IS_SEL_HIDE                       =
*     I_DEFAULT                         = 'X'
     i_save                            = 'A'
     is_variant                        = wa_variant     " variant name
*     IT_EVENTS                         =
*     IT_EVENT_EXIT                     =
*     IS_PRINT                          =
*     IS_REPREP_ID                      =
*     I_SCREEN_START_COLUMN             = 0
*     I_SCREEN_START_LINE               = 0
*     I_SCREEN_END_COLUMN               = 0
*     I_SCREEN_END_LINE                 = 0
*     I_HTML_HEIGHT_TOP                 = 0
*     I_HTML_HEIGHT_END                 = 0
*     IT_ALV_GRAPHICS                   =
*     IT_HYPERLINK                      =
*     IT_ADD_FIELDCAT                   =
*     IT_EXCEPT_QINFO                   =
*     IR_SALV_FULLSCREEN_ADAPTER        =
*   IMPORTING
*     E_EXIT_CAUSED_BY_CALLER           =
*     ES_EXIT_CAUSED_BY_USER            =
    TABLES
      t_outtab                          = it_final      " internal table
   EXCEPTIONS
     program_error                     = 1
     OTHERS                            = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " ALV_DISPLAY
*&      Form USER_COMMAND
*       SUB-ROUTINE USER_COMMAND IS USED TO HANDLE THE USER ACTION
*       AND EXECUTE THE APPROPIATE CODE
*      -->LV_OKCODE   used to capture the function code
*                     of the user-defined push-buttons
*      -->L_SELFIELD   text
FORM user_command USING lv_okcode LIKE sy-ucomm l_selfield TYPE slis_selfield.
* assign the function code to variable v_okcode
lv_okcode = sy-ucomm.
* handle the code execution based on the function code encountered
CASE lv_okcode.
* when the function code is EXECUTE then process the selected records
    WHEN 'EXECUTE'. "user-defined button
* to reflect the data changed into internal table
      DATA : ref_grid TYPE REF TO cl_gui_alv_grid. "new
      IF ref_grid IS INITIAL.
        CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
          IMPORTING
            e_grid = ref_grid.
      ENDIF.
      IF NOT ref_grid IS INITIAL.
        CALL METHOD ref_grid->check_changed_data.
      ENDIF.
* refresh the ALV Grid output from internal table
      l_selfield-refresh = c_check.
ENDCASE.
ENDFORM.
This will reflect all the changes in the internal table. Now you can include your logic as per your requirement.
Hope this solves your problem.
Thanks & Regards,
Tarun Gambhir

Unable to save data entered in editable field of IW37N output

Hi Gurus,
I have made one of the fields in IW37N ALV output as editable using exit IWOC0004. When I enter the values in the field, I am unable to save the data to the order. The orders are getting successfully released but the values entered are not saved in database. Please help.
Thanks,
Pramod.V

Discovered that the problem was with the Adobe version. Updated version to 8.1.1 and installed Active X control software and things started working.

Unable to capture data in an editable dynamic ALV.

Hi ,
I have created a dynamic editable ALV whose displayed structure can be changed at runtime based on the selection in a drop down list value selector.
Im trying to capture the values entered in the ALV into an internal table before the user changes the structure of the ALV to a different structure.
In the ON_SELECT event handler of the drop down list box , im rasing a data_check event to capture the ALV data.
The problem is that the control is not entering the event handler for the data_check event.
If i raise the data_check event in my save event handler or any other event handler , it works fine.
Can someone please suggest a solution.
Regards,
Newton.

Hi ,
I have figured out that the problem is local to my machine , because the code works fine on other machines.
I guess my internet explorer has some bug.
Regards,
Newton.

Unable to save PDF's that have editable fields

I am unable to save forms that have editable fields. I get the error "The document could not be saved. The disk you were saving to or the disk used for temporary files is full. Free some space on this disk and try again, or save to a different disk"
I am running windows xp, and started with reader 10.1.4 having this issue, now i upgraded to 11 and same results. My co workers can save the same form and i have over 80 gb of free space on my hard drive which is where i am saving it to. I have tried saving it to other locations on my hard drive but get the same message. I can however save pdf files that have no fillable forms in them just fine.
I could really use some help.
Thanks

Figured out prtected mode was set to enabled on startup. Turned that off and no more problems.

How can I remove an OVS extension from a context attribute?

In our Web Dynpro application we provide a generic search mask to the user. The information about the search fields like labels, length etc. is retrieved from the backend during runtime. Also, the information if there should be a value help available or not is read from the backend during runtime. In case there should be a value help for a search field we just add an OVS extension, using method WDValueServices.addOVSExtension(...). For this, we pass the AttributeInfo of all relevant context attributes to this method.
The problem is now the following: The user can switch between different kinds of search masks. Because of the generic implementation all use the same Web Dynpro context. So it might be that the search field #1 on the first input mask has a value help whereas search field #2 on the second input mask doesn't. But if we once have added an OVS extension to the context attribute of search field #1 it can apparently never be removed anymore. At least I couldn't find a method to remove it.

At least your second proposal would work for sure if I had only static context nodes apart from the dynmic OVS context. But in my case I can not use wdContext.reset(false) since I have dynamic context nodes in my controller that would get lost. And unfortunately, there is no method available to reset a specific context node only instead of the whole context.
I contacted the responsible Web Dynpro developers in the mean time and they offered to implement an API in SP11 to remove the OVS.

Unable to capture field values in Master agreement Line Items

I am trying to get the field values from master agreement line items page. I have written the following code to get the line item details which is working fine to capture part number and quantity->
agreementBean = doc.getRootParentIBean();
lineItemCollection = agreementBean.getLineItems();
collectionsize = lineItemCollection.size();
for(i=0;i<collectionsize;i++){
     collectionbean = lineItemCollection.get(i);
     partNum = ""+collectionbean.getPartNumber() ;
     Quantity = ""+collectionbean.getQuantity();
     throw doc.createApplicationException(null,partNum + " , " + Quantity );
Now, my problem is that I am unable to capture the following field item values in the master agreement > line items page.
1. Price Unit
2. Unit Price
3. Product Category
4. Plant
Please help me to find the values.
Thankx in Advance.
Su
Edited by: subrataindra on Aug 10, 2010 11:11 AM

This will return the name of the plant.
.getExtensionField("PLANT").get().getDisplayName(session);
Check if this returns the product category
collectionbean.getExtensionField("ITEM_CAT").get().getDisplayName();
This will Return the Price
collectionbean.getExtensionField("PRICE").get().getPrice();
(return type :BigDecimal)
This will return the currency
collectionbean.getExtensionField("PRICE").get().getCurrency;
(Return type:String)
Similarly to retrieve other fields for which there are no standard functions, use .getExtensionField("Field ID")
Hope this helps
Regards,
Immanuel

Unable to capture data from drop down list in custom added field in migo tcode at item level

Hi guys,
need bit help in resolving query related to custom added field in Tcode migo.
i have added a field in migo at item level ,in this i have used drop down list
to get data but unable to capture data from drop down list.gown through
many blogs in scn but unable to resolve.
Please help me out in this.
Thanks,
Umakant.

Hi,
U can use following code to fill the list box
write this code in PBO
In layout editor please select listbox in dropdown attribute of input field and put some fctcode attribute
TYPE-POOLS vrm.
DATA values TYPE vrm_values WITH HEADER LINE.
TABLES: <ur custom Database table>.
clear values, values[].
SELECT * FROM <ur custom Database table>.
    values-text = <TABLE FIELD TO DISPLAY IN DROPDOWN> .
    values-key = <TABLE KEY FIELD TO DISPLAY IN DROPDOWN>.
    APPEND values.
ENDSELECT.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id              = '<SCREEN INPUT FIELD NAME>'
      values          = values[]
    EXCEPTIONS
      id_illegal_name = 1
      OTHERS          = 2.
Also please define the following before accessing the listbox value
data: <listbox input field name> type <table field name>,
        <inputfield name where text to display> type string in top include
In PAI, select the text from the table into <inputfield name where text to display> depending on value selected which will be called when enter key is pressed or any vale is selected

Unable to capture screen fields in eCATT

Problem description 1 : Unable to capture screen fields in eCATT
Recording using SAP GUI Method.
Problem description 2 :Unable to capture Tab controls while recording
in eCATT using SAP GUI Method.
Thaks for any suggestion you could provide me and once again for your courtesy attention.
Regards,
Eric Monteiro

Hi Phani,
Please try below code:
*data declaration for reading values given by user in the selection screen field.
DATA: BEGIN OF i_tab OCCURS 0.
          INCLUDE STRUCTURE rsselread.
DATA: END OF i_tab.
MOVE: 'LOGSYS' TO i_tab-name,
        'P' TO i_tab-kind. u201CP For parameter
APPEND i_tab.
MOVE: 'GP_SIMVE' TO i_tab-name,
        'P' TO i_tab-kind. u201CCheck if field is Parameter
APPEND i_tab.
*move program name and screen number into local variable.
l_prog = sy-repid. u201C(Try by directly passing program name also)
l_dynnr = sy-dynnr. u201C(Try by directly passing Screen number also)
*calling function module to get the value given by user.
CALL FUNCTION 'RS_SELECTIONSCREEN_READ'
    EXPORTING
      program     = l_prog
      dynnr       = l_dynnr
    TABLES
      fieldvalues = i_tab.
Hope this should slove your issue.
Thanks & Regards,
Gaurav.

To capture the selected rows along with edited field contents in alv report

Dear All,
         I do have requirement where, in alv report output one field is editable and need to save the content of the edited field along with the selected rows.
         For example If there are 10 records displayed in the alv output with 20 fields.
Out of this 20 fields one field (say XYZ) is editable. Also i have already created a new pushbutton (say ABC) on alv output. Now in the alv output if we maintain some value in the field (XYZ ) for the 2nd and 4th record and select this two records, and when clicked on the pushbutton (ABC) it has to update the DB table.
      I am using the Func Module 'REUSE_ALV_GRID_DISPLAY'.
      Your early reply with sample code would be appreciated.
Thanks in Advance.

HI Naveen ,
There is an import parameter "i_callback_program" in the function module,
plz pass the program name to it.
Capture the command by passing a field of type sy-ucomm to "I_CALLBACK_USER_COMMAND ". Check the returned command and
and program a functionality as desired.
u can try the event double_click or at line selection. there u can use READLINE command to c if the line has been selected.
In case it is , process the code segment.
Regards
Pankaj

Update non-editable field Start date which is calculated from other context

I had created some custom date fields(model, bol entity) in component ICCMP_BTSHEAD. We are calculating Start date based on the new input value into receiving date in the other context node.
so, for this i get the value on controller class(_IMPL). and pass the same value in the GET method of Start date.
But, Problem is Start date is the non-editable field so SET method will not be trigger as expected. so the same i used the DO_PREPARE_OUTPUT method but it's called and update the value when we press the enter. IF directly we click on the "SAVE" button then it' trigger but value is not updating in the database.
Please, find the below piece of code for the same. can u please anybody help me that how can i achieve this requirement.
DATA: l_recieve_date     TYPE crmt_date_timestamp_from,
        lr_current TYPE REF TO cl_bsp_wd_mixed_node,
        lr_col      TYPE REF TO cl_bsp_wd_collection_wrapper.
DATA: lv_date TYPE d,
         lv_time TYPE t,
         lv_date_temp TYPE sydatum.
IF iv_first_time EQ abap_false. "avoid for first tile load
Read the value of btreceivedate-TIMESTAMP_FROM.
    lr_col = me->ztyped_context->btreceivedate->get_collection_wrapper( ).
    IF lr_col IS BOUND.
      lr_current ?= lr_col->get_current( ).
      IF lr_current IS BOUND.
        lr_current->if_bol_bo_property_access~get_property_as_value( EXPORTING iv_attr_name = 'TIMESTAMP_FROM'
                                   IMPORTING ev_result   = l_recieve_date ).
      ENDIF.
    ENDIF.
    IF l_recieve_date IS NOT INITIAL.
      CONVERT TIME STAMP l_recieve_date TIME ZONE sy-zonlo
                INTO DATE lv_date TIME lv_time.
Check day is working day - if not, correct to previous working day
      IF lv_date IS NOT INITIAL.
        lv_date_temp = lv_date.
        CALL FUNCTION 'DATE_CONVERT_TO_FACTORYDATE'
          EXPORTING
            correct_option      = '-'
            date                = lv_date
            factory_calendar_id = 'GB'
          IMPORTING
            date                = lv_date_temp
          EXCEPTIONS
            date_after_range    = 1
            date_before_range   = 2.
        IF sy-subrc IS INITIAL.
          lv_date = lv_date_temp.
        ENDIF.
      ENDIF.
      CONVERT DATE lv_date TIME lv_time
             INTO TIME STAMP l_recieve_date TIME ZONE sy-zonlo.
    ENDIF.
    lr_col = me->ztyped_context->btstart->get_collection_wrapper( ).
    IF lr_col IS BOUND.
      lr_current ?= lr_col->get_current( ).
      IF lr_current IS BOUND.
        lr_current->if_bol_bo_property_access~set_property(
                   iv_attr_name = 'APPT_TYPE'               "#EC NOTEXT
                   iv_value     = 'ZSTWTIME0001' ).
        lr_current->if_bol_bo_property_access~set_property(
                        iv_attr_name = 'TIMESTAMP_FROM'     "#EC NOTEXT
                        iv_value     = l_recieve_date ).
      ENDIF.
    ENDIF.
ENDIF.
could you please help me?

Hi,
Thanks for your reply,
yes, i checked the same thing also. But DO_HANDLE_DATA is called before the SET method of receiving date and in that case we are getting the old value in DO_HANDLE _DATA and source and Target fields both are not updating.
I checked, if, i'll change the input field then set method of input field and then EH_ON_SAVE is called directly.
i think, if i'll do the same modification in the EH_ON_SAVE method as i did in the DO_PREPARE_OUTPUT then it can be updated but i don't want to change the EH_ON_SAVE at this moment.
is there any other way to update the START DATE(Display mode in the screen) which is calculate from the other context node field receiving date.

How to map a context attribute to an input field

Hi,
I am new to CRM 2007 UI.I have a table control view on my screen and records are filled in this table when an user enters a value in an input field and presses enter.My bsp page looks something like this.
<%@page language="abap" %>
<%@extension name="chtmlb" prefix="chtmlb" %>
<%@extension name="thtmlb" prefix="thtmlb" %>
<%@extension name="uhtmlb" prefix="uhtmlb" %>
<%@extension name="htmlb" prefix="htmlb" %>
<%@extension name="xhtmlb" prefix="xhtmlb" %>
<%@extension name="crm_bsp_ic" prefix="crmic" %>
<%@extension name="bsp" prefix="bsp" %>
<%
DATA lv_xml TYPE string.
lv_xml = controller->configuration_descr->get_config_data( ).
%>
<thtmlb:grid cellSpacing = "1"
             columnSize = "1"
             height      = "100%"
             rowSize     = "2"
             width       = "100%" >
<thtmlb:gridCell colSpan     = "1"
                   columnIndex = "1"
                   rowIndex    = "1"
                   rowSpan     = "1" >
    <thtmlb:label id   = "NAMELABEL"
                  for = "NAMEINF"
                  text = "Enter a name" />
    <thtmlb:inputField          id                = "NAMEINF"
                            disabled          = "FALSE"
                            tooltip           = "Enter a name to see all records"
                            submitOnEnter     = "X"/> </thtmlb:gridCell>
<thtmlb:gridCell colSpan     = "1"
                   columnIndex = "1"
                   rowIndex    = "2"
                   rowSpan     = "1" >
    <chtmlb:configTable id              = "PaymentTable"
                        table           = "//HeaderData/Table"
                        xml             = "<%= lv_xml %>"
                        selectedRowIndex      = "<%= HeaderData->SELECTED_INDEX %>"
                        fillUpEmptyRows = "FALSE" />
</thtmlb:gridCell>
</thtmlb:grid>
The problem is that I want to map this input field to my context attribute.I am from Webdynpro background and ther its pretty easy :)....
Any suggestions will be helpful.
Thanks
Sourav

Hi,
you should add the context attribute to the html page itself, or another way of doing it is to implement the set_model method of the view controller.
On the view controller you can find a lot of usefull attributes like the view manager which can help you understand the bsp framework
Best regards,
Erika

WDJ: binding image field to context attribute

Dear all,
I filed a form with an image field to allow the user to insert a picture on the form from his PC.
The form is shared by several Web Dynpro Java View.
What is the right type of the context attribute for binding the image field of the form?
Thanks for your time.
Regards,
Mirco

Hi Chintan,
I also think it was a binary. but I do not, partly because the image field object is bindable with any data context (I tried so far with integer, string, binary)
To share the image between two Web Dynpro vew I used "usePDF" mode but I would like to bind the image with a context attribute so I can use "updateData" mode instead of "usePDF" mode
Regards,
Mirco

Check Mandatory Fields when state is bound with context attribute

Hello All,
Currently i am facing problem in my SAP SRM 7.0 standard component.
Actually, i have to remove mandatory(State = Required) for one of my inputfileds for this I have written below code, but it has been remove only Red mark * infront of Inputfield, after that, i am trying to save other data, still it is asking me enter the required value.
     here my input field bound with Context attribute, it is standard attribute.
data:lo_input1 type ref to cl_wd_input_field.
   lo_input1 ?= VIEW->get_element( 'NAME_FIRST' ).
   lo_input1->set_state( '00' ).
I am trying to delete state = required property from below component and view
Component Name : /SAPSRM/WDC_MOFC_PERSON
       View : V_PERSON
Can you help me on this?
Thanks
Sandeep.

Hi Baskaran ,
Thanks for ur reply ..
Eveen in that component they have not used cl_wd_dynamic_tool class for mandatory attributes
I want to share another thing with u that is
I am trying it in another way
with the following code which i have done in post exit is
let me explain u what i did
__first of all i got the child node of rootuielementcontaine
later
i get the childnode of container_left and assigned it to another class of ref cl_wd_uielemnent
now where i have struked is
*CALL METHOD LR_CHILD2->GET_CHILD
EXPORTING
   ID        = 'FORM_OF_ADDRESS_DROPDOWN'
   INDEX     =
RECEIVING
   THE_CHILD = LR_C1.
what the error i am getting is
OBJECTS_OBJREF_NOT_ASSIGNED
Please correct me if there is any wrong inn the code ...
FORM_OF_ADDRESS_DROPDOWN--->ui element dropdown
r__ DATA lr_container TYPE REF TO cl_wd_uielement_container.
DATA lt_children TYPE        cl_wd_uielement=>tt_uielement.
DATA lr_view      TYPE REF TO if_wd_view.
DATA lr_child     TYPE REF TO cl_wd_uielement.
   DATA lr_child1     TYPE REF TO cl_wd_uielement.
   DATA lr_child2     TYPE REF TO cl_wd_uielement.
data : LR_CON1 TYPE REF TO CL_WD_TRANSPARENT_CONTAINER.
data : LR_CON2 TYPE REF TO CL_WD_TRANSPARENT_CONTAINER.
SANDEEP
lr_container ?= view->get_element( 'ROOTUIELEMENTCONTAINER' ).
lt_children = lr_container->get_children( ).
CALL METHOD lr_container->get_child
   EXPORTING
     id        = 'DATACONTAINER'
     index     = 1
   RECEIVING
     the_child = lr_CHILD.
LR_CON1 ?= LR_CHILD.
CALL METHOD LR_CON1->GET_CHILD
EXPORTING
    ID        = 'CONTAINER_LEFT'
    INDEX     = 1
RECEIVING
    THE_CHILD = LR_CHILD1 .
DATA : LR_CHILD2 TYPE REF TO CL_WD_TRANSPARENT_CONTAINER.
LR_CHILD2 ?= LR_CHILD1 .
*DATA : LR_C1 TYPE REF TO CL_WD_UIELEMENT.
*CALL METHOD LR_CHILD2->GET_CHILD
EXPORTING
   ID        = 'FORM_OF_ADDRESS_DROPDOWN'
   INDEX     =
RECEIVING
   THE_CHILD = LR_C1.
*DATA : LR_DD TYPE REF TO CL_WD_DROPDOWN_BY_KEY .
*LR_DD ?= LR_C1 .
*CALL METHOD LR_DD->SET_STATE
EXPORTING
   VALUE = '00'
sandeep

Editable field sprites capture a mouesdown on right click

I have editable field members and am using buddy to make a
right click copy/paste menu - problem is that editable field
sprites seem to think that a rightmousedown is also a left
mousedown. This completely breaks my behaviour. Anyone ever come
across this before? I'd rather not replace all my field members
with text members as thats another pile of re-scripting...
Thanks

That is weird! I had never noticed that. It only seems to
happen if
the #field member is editable. If the SPRITE is editable
instead (in
the Property Inspector on the Sprite tab), then there is no
problem.
That should be an easier fix than switching over to #text
members at least.

Unable to capture context attributes of editable fields

Similar Messages

Maybe you are looking for