Editing the auto complete dictionary?

Hello All, Was wondering if there's a way to edit the auto complete dictionary on the E6/Symbian ^3/Symbian Anna? There is an auto complete dictionary editor available from Beta labs, but is incompatible with the E6. I seem to remember that the trick in earlier versions of Symbian phones was to connect the phone in USB mass storage mode and then edit a file. Don't remember the name of the file at the moment. Does any one remember this? Thanks!
Present: Lumia-820
Past: E6, L-800, N8, N900, 5800 XM, 6500 Slider, 6303c

@abjbhat
There is always choice of deleting predic folder and restart to make it build from scratch.
As regards editing here is post appertaining to S60 3rd FP1 device for what it's worth:/t5/Nseries-and-S60-Smartphones/Predictive-Text-Li​brary-how-to-delete-a-word/m-p/118755/message-uid/​...
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

  • Redirect to 3 diffrent pages based on value in the Auto complete field.

    Hi Friends,
    I am using an "Auto complete field" in a page for searching(Apex version 4.0). But i need to get values from 3 tables and when clicking on the value redirect to any of the 3 pages based on the value.
    For example i am having 3 tables. 1.Customers 2.Sites 3.Employees. When i enter 'c' in the search field i need to get values from 3 tables to be listed in that "auto complete" field. i.e, if i am having customer with name 'cusotmer1', 'customer2' and site with names 'cisc1','cisc2' and employees with name'cid1','cid2' ; when i enter 'c' in the auto complete field all 6 values must be listed in the "auto complete" field and when clicking on 'customer1'/'customer2' need to redirect to page 'customer'. When clicking on 'cisc1'/'cisc2' redirect to "site" when clicking on 'cid1'/'cid2' redirect to employees page. Is there any way to achieve this. Please help.
    Regards,
    Nav

    Hi Nav,
    OK - on my page 1, I have a "Text Field with autocomplete" item called P1_SELECTION. The List of Values definition setting for this is:
    WITH D AS (SELECT ENAME || ' (Employee)' X
    FROM EMP
    UNION ALL
    SELECT DNAME || ' (Department)' X
    FROM DEPT)
    SELECT X
    FROM D
    ORDER BY 1This adds the appropriate suffix to each item to show where the data is from - you can change this if you want as this becomes part of the searchable text.
    On page 1, I have a normal SUBMIT button.
    Then I have two branches:
    1 - settings are:
    Branch Type: Branch to Page or URL
    Branch Point: On Submit: After Processing (After Computation, Validation, and Processing)
    Target Type: Page in this Application
    Page: 2 (the employee edit page)
    Clear Cache: 2
    Set these items: P2_ENAME
    With these values: &P1_SELECTION.
    Condition Type: Exists (SQL query returns at least one row)
    Expression 1:
    SELECT 1
    FROM DUAL
    WHERE :P1_SELECTION LIKE '%(Employee)'When Button Pressed: SUBMIT
    2 - settings are:
    Branch Type: Branch to Page or URL
    Branch Point: On Submit: After Processing (After Computation, Validation, and Processing)
    Target Type: Page in this Application
    Page: 3 (the department edit page)
    Clear Cache: 3
    Set these items: P3_DNAME
    With these values: &P1_SELECTION.
    Condition Type: Exists (SQL query returns at least one row)
    Expression 1:
    SELECT 1
    FROM DUAL
    WHERE :P1_SELECTION LIKE '%(Department)'When Button Pressed: SUBMIT
    On page 2 (the employee edit form), I have Computation with the following settings:
    Item Name: P2_EMPNO
    Type: SQL Query (return single value)
    Computation Point: Before Header
    Computation:
    SELECT EMPNO
    FROM EMP
    WHERE ENAME || ' (Employee)' = :P2_ENAME Condition Type: Exists (SQL query returns at least one row)
    Expression 1:
    SELECT 1
    FROM DUAL
    WHERE :P2_ENAME LIKE '%(Employee)'On page 3 (the department edit form), I have Computation with the following settings:
    Item Name: P2_DEPTNO
    Type: SQL Query (return single value)
    Computation Point: Before Header
    Computation:
    SELECT DEPTNO
    FROM DEPT
    WHERE DNAME || ' (Department)' = :P3_DNAMECondition Type: Exists (SQL query returns at least one row)
    Expression 1:
    SELECT 1
    FROM DUAL
    WHERE :P3_DNAME LIKE '%(Department)'The idea is that we append some fixed text to the end of the names in the autocomplete list. When the user clicks submit after selecting a name, one of the branches will be triggered depending on which fixed text is there. The branch sets the ENAME or DNAME value on the edit page and the computation on that page retrieves the appropriate EMPNO or DEPTNO value to put into the primary key page item (the main "Fetch Row..." process will then use that to get the real data for the record).
    Note that this assumes that ENAME and DNAME are unique on their tables - otherwise, the computations will not be able to find a single record and an error would be generated.
    Andy

  • How can i delete all the "auto complete" addresses on my iPad mail

    I want to give my old iPad 1 to a relative . I'd like to leave all the apps for her but not all the "auto complete" contacts which appear when I use the Mail function. These names are not on "contacts" and seem to have been accumulated from mails I have sent/received over the years. is there a way to just delete these without doing a complete delete of everything on the iPad?

    Yes, but it is very tedious. You will have to begin typing an email address in the To: field in order to bring up those suggested email addresses. Then you tap the blue "I" next to the email address. In the next window that appears, swipe down to Remove from Recents and tap that to delete the address. You would have to do this for every single email address that you have ever received an email from, that is not in your contacts app.
    But what I am curious about is why wouldn't you remove your email accounts from the iPad? That will eliminate the problem altogether. You don't want to give the iPad to your relative that way, do you?

  • Disable theMail user to re-enable the auto complete function in Composing.

    Hi Just wondering if anyone knows of a way of disabling the auto-complete function of the Addressing section under Composing in Mails preferences? To many company emails are being sent to the wrong recipients.
    I have changed everyones preferences and used ARD to push out the updated preference, but as the user can just switch it back on, its not very helpful. I need a way of locking down the preference?
    Any help appreciated..
    Thanks

    Solved.. I just added the preference setting to to the Library/Preferences/ for Mail and it over rides the users... I might try this on other applications...

  • Adding words to the auto complete library

    Is there any way to add a word to the auto complete Library?  Auto Complete keeps changing the spelling of my name.  I thought I noticed that the auto complete had a "learn" feature.  It seemed to me that it would remember words after I typed them and ignored auto correct but I guess I was imagining things.
    Holli

    By clicking the X to ignore the autocomplete does add it.  However there is more to it than adding.
    It "weights" words.  So if the word it thinks you want is "weighted" more in algorithim it will still suggest it.  However each time you ignore it it "should" weight  you more and more and the other word less and less.

  • Clear the auto complete function of Mail addresses? Désactiver la saisie semi automatique des adresses Mail sur iPad?

    Je ne souhaite pas que les differentes adresses pré-utilisées s'affichent quand je veux taper une adresse mail et envoyer un nouveau message. Comment désactiver la saisie semi automatique qui m'affichent ces différentes adresses? ex: si je tape la lettre "p" j'ai 4 adresses qui sont pré-sélectionnées et je ne veux pas ça.
    Merci d'avance
    I don't want the email addresses used for previous sent messages to show when I input the first letter of the desired receiver of the message. How can I disactivate the auto complete function of the mail addresses? i.e. when I type the letter "p", I don't want the 4 addresses starting with "p" to show.
    Thanks.

    If you erase the iPad completely, (erase all content and settings) the addresses will go away, but they will return again as soon as you start sending emails again and entering text in the To: field. And you will have to set the iPad up all over again.
    If you reset all settings - they will not go away.
    Erasing the device is pretty radical and it is only a temporary fix anyway. The suggested email addresses window will always pop up when you start entering text into the To: field and there is no way to deactivate it.

  • Hello. I recently updated numbers on my macbook pro. I like the auto completion feature (proposing te word as I type). With this new update, I cannot see this feature and it doesn't work automatically. Can I have any help on this issue ?

    Hello. I recently updated numbers on my macbook pro. I like the auto completion feature (proposing te word as I type). With this new update, I cannot see this feature and it doesn't work automatically. Can I have any help on this issue ?

    This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
    Here's the link for the safeboot
    http://support.apple.com/kb/HT1564?viewlocale=nl_nl

  • How to reset the auto-complete email adresses?

    How can I delete old email addresses from auto complete?
    I have been having trouble trying to find out how to delete the old typed email history. For an example, if I go to send a picture to Bob, I start typing Bob and it comes up with 3 old emails of his. Not a big deal except it's hard to keep track of what emails are current.
     In other words, after deleting the old emails in the contacts it still shows up when I start typing a person's name. 

    I am having the same problem on my IPad.  It appears these old email addresses are saved in the memory and from what I read, there is no way to delete them regardless if you delete the contact.  Hopefully in a future update that can be resolved.  It is very annoying though.

  • How do I find "Tools" so I can disable the auto complete function?

    I was told that to disable to auto complete function, I had to click on Tools. I can't find "Tools". How do I get there?

    Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily if the Menu Bar is hidden.
    Use "Firefox > Options" instead of "Tools > Options" if the menu bar is hidden.
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history" : "Remember search and form history"
    *https://support.mozilla.org/kb/Form+autocomplete

  • Edit the auto-correction suggestion words

    Hello,
    Is there a way to edit the words that are suggested by the iphone ?
    Thanks

    iOS learns new words much faster than it unlearns them, unfortunately. But I have just stumbled on a way to help an iPhone (or other iPad, iPod touch, etc.) unlearn a word it has mistakenly learned. This requires iOS 5.0 or higher.
    Suppose your young daughter thought it would be fun to type "yöü" instead of "you". Sure enough, after a few times the phone learns that when you type "you", or "yoi", "yu", "tou", "tiu", etc., you really mean "yöü". (Grr.) The cleanest way to unlearn this is to go to Settings > General > Reset > Reset Keyboard Dictionary. The problem with this, of course, is that it resets everything that it has learned about your typing, which you may not want to do.
    Here is the workaround to unlearn a specific wrong word:
    1) Go to Settings > General > Keyboard > Add New Shortcut...
    2) In the phrase field, enter the correct word (e.g., "you")
    3) In the Shortcut field, enter the keystrokes that tend to bring up the incorrect word (e.g., "yoi").
    4) Tap Save.
    5) Repeat steps 2-3 for each set of keystrokes that tends to product the unwanted word (e.g., "yu", "tou", "tiu", etc.).
    6) Open a new note in the Notes app and test. You'll see the proper word now gets suggested instead of the incorrect one.
    Interestingly, if you then go back to Settings > General > Keyboard and delete the shortcuts you added above (by stroking them out with your finger and tapping Delete), and then repeat step 6, you'll see that the phone appears to have largely unlearned its bad habit. It seems that adding the shortcuts helps override the learned behavior, even after the shortcut is deleted. But you certainly don't need to delete the added shortcuts if they are not bothering you.
    For good measure you can also add a shortcut with the correct word ("you") in the phrase field and the incorrect one (e.g., "yöü" in the shortcut field). I'm not sure if this helped, but based on my theory above it might help too. All I know is I did all of the above and now the incorrect word rarely (but not quite never) gets proposed when typing. Yay!

  • How to change the width of the auto complete drop down list?

    Hi,
    I implemented an autocomplete mechanism, using ICompletionSession and ICompletionSourceProvider. I have an issue with the size of the drop-down list opened when I use this autocomplete mechanism. The width of the autocomplete list remains the same, even
    if the strings displayed change. This is apparent especially when I hit "backspace" on the already typed string, while the drop down list is opened: the deletion of the last character allows for more completion strings to be used, but since the drop
    down width does not change, the longer strings appear cut.
    Is there a way to force the drop down list to recalculate its width?
    Yoel

    I don't think there's any way, even VS itself can't do that you know, and the interfaces don't have such kind of events or properties.

  • How do you sync the auto-complete facility in mac mail from one device to another?

    Hi - Autocomplete in mac mail works fine on my macbook pro. I just got a Mac Pro and it want to do the same but it doesn't. It seems only to read the addresses in my address book and not memorize any of the ones from the "TO" field in Mail? Thanks....

    As Studio X pointed out, you open a huge can of worms when you work with sequences of different specifications, but try this -
    once the clip has been pasted into the sequence, click on it on the timeline so that it is selected. Now Control-click on that clip, and from the drop down menu, choose Remove Attributes.
    When the remove attributes pane opens, check the box for Basic Motion and Distort (if they are not grayed out) and click OK. This should reset the clip size.
    If this is successful, you can do this to multiple clips all at once by selecting them, then clicking on any one of the selected clips and doing the above.
    MtD

  • Is there a way to remove one or more words in the dictionary list of auto-completion?

    Is there a way to remove one or more words from the dictionary list of auto-completion?

    Hi Gordon,
    Auto-completion does not involve the dictionary. The process is dynamic, and remembers the text string you have entered into each cell. The auto completion list is constructed using data you have entered into cells above the one you are currently working with. Suggestions presented contain the same character string as a previous entry in that column. Editing the list presented is not possible.
    Auto-Correction does involve the spelling dictionary. It monitors the text as you type. If it finds an 'unregognized word,"' AND has more than one suggestion as to the 'correct' word, it opens a dialogue, giving you a chance to choose one of the suggestions, enter your own corection, or to accept the current spelling. If there is only one suggestion offered, Auto-correction automatically replaces the unrecognized word wth that suggestion.
    Regards,
    Barry

  • Where is the IPTC auto complete function in Photoshop CC 2014?

    I miss a function in the IPTC file info since my company upgraded from Photoshop CC to Photoshop CC 2014. In the past the description had a auto complete function, which is a really good function when you have to edit multiple images with the same description. Is it possible to get this option back in CC 2014?
    Cheers,
    Lars

    So what we are talking about is the "Auto Complete" feature in the File > Info form in Photoshop.
    Yes it has been taken out in CC 2014 and it may not be convenient to move your work over to CC for that one feature.
    You can submit it as a feature request here: Photoshop Family Customer Community
    That forum would be the best for reporting it.
    Gene
    This forum is mostly users like yourself and best can be done here is recommend workarounds or other software.
    File Info Preferences CC                                                             
    File Info Preferences CC 2014

  • How can I clear the stored auto-complete e-mail addresses in Thunderbird, without clearing everything?

    In the auto-complete of e-mail addresses, old invalid addresses keep appearing in this list that are not in any address book (any more).
    How can I delete one from the list, or perhaps all?
    (Thunderbird v31, Dutch)

    The only place that Thunderbird gets suggested addresses is from your address books. I have seen some not show up in the books because some key info was never stored when the contact was saved.
    Sometimes you can start a new message and when the bad contact shows up select it. Create the message and save it to drafts. Then you can go to the Draft folder open the draft message by right clicking and select Open Message in Tab. Then click the star to the right of the contact and it will open the contact edit button. From there you can delete the contact.
    This does not always work though.

Maybe you are looking for