Effect causing an error, but impossible to find in the TimeLine

Hello,
Is there any way to find where an effect is used inside a TimeLine in FC Exp. ?
I have a trouble with a video quite complex I did few months ago. I tried recently to edit it again to make some light changes, but when I tried to render it, I have a message from FC Exp (I am using the last version 4.0.1 build 401B2 with QT 7.6 and OS X 10.5.6) telling me it can't load the effect "Flop - 2". When I load my project, i also I got an error message telling me that :
"The following effects could not be loaded :
Flop -2
Flop - 2
These effects will not be applied. Please install the appropriate effects and re-open the projects."
I don't remember exactly what I did one year ago... I supposed I made a copy of the Flop effect, and renamed it "Flop - 2" and because it is no more in my files, it mess up the rendering of my video (just my guess).
At first, I actually found some "Flop - 2" effects in my project. So, I deleted them and put some new Flop effects.
But it seems either I forgot to find some others occurrences of my 'Flop - 2' effects inside the other clips of my TimeLine, either my .fcp file have been corrupted and still consider I am using Flop - 2 effects, even if they have been deleted...
I had a look at all the clips I am using and could found no more 'Flop - 2'.
So, I am wondering if there is any way to see a list of all the effects I am using in my project, and the name of the clips where they are used... Such function would help me to find the 'Flop - 2' 'ghost' effects and get rid off them.
Any suggestions/comments would be very much appreciated. I spent so many days trying to fix it…

There is no way to do a search for a filter in a sequence that I know of.

Similar Messages

I rented a film but impossible to find it while i have confirmation it was bought

i rented a film but impossible to find it while i have confirmation it was bought. i read i have to go to store and "recherche telechargement disponible" (find available download) but this also impossible to find

Hey there agathedev,
It sounds like you made a rental purchase on your Mac in the iTunes Store but cannot find it to watch. If it is not in Movies in a tab labeled Rentals, you can report a problem with the purchase directly to the iTunes store support team with this article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
To report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase, follow these steps:
Find the email receipt for your purchase.
Click Report a Problem under the app that is having the issue.
When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
Click Report a Problem next to the item you are having an issue with.
From the Choose Problem dropdown menu, choose the appropriate issue.
Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
Click Submit to have your issue reviewed.
Thank you for using Apple Support Communities.
All the best,
Sterling

I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

I have final cut pro x-i have been using the share button previously and had no problem.as of today i share a movie to 720hd, and after a white it says share successful but i cannot find where the movie has been saved???need help

i have final cut pro x-i have been using the share button previously and had no problem.as of today i share a movie to 720hd, and after a while it says share successful but i cannot find where the movie has been saved???need help--i cannot find the destination. can this be changed.it used to go to itunes, home video.thanks, dimitrios

EExactly what settings are you using. Some go to iTunes.

Good night, do not know what is happening can not buy gold with my visa card for itunes gives me error, but I have money on the card, always worked but this time not accepted!!

good night, do not know what is happening can not buy gold with my visa card for itunes gives me error, but I have money on the card, always worked but this time not accepted!!

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Had hard drive renewed due to product recall (iMac) backed up complete system on time machine . Had the drive done got mac back tried to reinstall from time machine .The new drive tells me that the space has been taken up but can't find where the file hav

Had hard drive renewed due to product recall (iMac) backed up complete system on time machine . Had the drive done got mac back tried to reinstall from time machine .The new drive tells me that the space has been taken up but can't find where the file have gone. Need to free up the space that the ghost file take up so I can drag drop from ex drive onto harddrive

Here's the scoop, new friend.....
When you boot into Time Machine you'll get the same OS X Utilities screen as you would if you booted into the Recovery HD. So, from there go into Disk Utilities to erase/format your internal drive. After that's done, back out to the OS X Utilities screen and select the restore option. Just follow the prompts to select the TM back up date you want to restore from and where to restore it to. Pretty straight forward.

Intel 520 SATA III SSD causes atapi errors, but stock Hatachi SATA II does not

W520 Received March 2012. Took out stock Hatachi HTS72322A7A365 500GB SATA II drive and replaced with Intel 520-Series 240 GB SATA III SSD also put a second identical SSD in drive bay. All went well until a few days ago, now getting scores of Atapi - Event ID:11 - The driver detected a controller error on \Device\Ide\IdePort0. Either of these two SSDs bring up this error on channel 0 (underneath laptop). NEITHER (NONE) SSD brings up the error in the drive bay.
Put the Hatachi back and no error. What happened over the last few days? Hatachi SATA II no error; is there a W520 hardware problem with very high speed SATA III SSDs? Why the degrade all of a sudden? Bad chip set? BIOS was upgraded to latest, but still errors. Don't think there were any WIN-7 / 64 updates.
Call Lenovo to replace laptop? But NO errors with the stock / supplied SATA II Hatachi, just the SATA III SSD on channel 0, but not channel 1, so do I have a claim? Any ideas? I'd buy the wimpy Lenovo 160GB SSD (it's approved) for channel 0, but it's SATA II not III. SSD or W520?
W520 4282W59 WIN-7-64 i7-2760QM @ 2.40GHz 2401 Mhz, 16GB Memory, NVIDIA Quadro 1000M

I did a hard drive copy from the Intel 520 SSD in chanel 0 (underside laptop) to a new Samsung 830 256GB SSD in channel 1 (Ultra Bay). Remember I get the atapi errors on channel 0 with the Intel 520 SSD in chanel 0. The copy took longer that I thought it would. Then I put the Samsung in chanel 0 and the Intel in chanel 1 UltraBay. Reboot. No atapi errors! The Samsung DOES NEED "enable write caching and turn off buffer flushing" or it performs badly compared to an Intel 520 SSD. The Samsung (using ATTO and AS SSD) comes in at 475-495 MB/s with "enable write caching and turn off buffer flushing". It performs half that if "enable write caching and turn off buffer flushing" is not checked. The Intel SSD performs at 485-505 MB/s no matter if "enable write caching and turn off buffer flushing" is checked or not. These are general observations and are dependant on transfer size, queue depth and so forth, but this observation is repeatable.
So, all things being equal, one might conclude that the Intel 520 SSD is not compatible with the W520. NO. NOT. I put that Intel 520 SSD back into chanel 0 and booted up. Again see atapi errors. Next I did a complete software update from lenovo. Checked and installed all updates, recommended, critical, so forth. Ended up with all that bloatware. Big battery and Wi-Fi icons on notification area task bar... Ran the ATTO and the AS SSD in parallel. No atapi errors. Disk rates way up there at 500 MB/s. Ran MalwareBytes in parallel with MS Security Essential in parallel with ATTO in parallel with AS SSD. No atapi errors and still great disk rates.
Nest removed as much Lenovo bloatware as possible. Reboot. Still NO ATAPI ERRORS. The Intel 520 SSD is better than the Samsung 830 looking at AS SSD and ATTO, but the Samsung is quite respectable.
Solved? Yes mostly. I took another Intel 520 SSD that was always used as a one for one copy of my chanel 0 Intel 520 SSD. I put this other, identical copy, Intel 520 SSD in chanel 0 and again saw atapi errors. I upgraded Lenovo software, but only the one critical update (Intel ACHI SATA Driver 11.2.0.1006). Reboot. No more errors, BUT this (identical copy) Intel 520 SSD only works at SATA 2 rates. ATTO and AS SSD never go higher than 250 MB/s.
I will keep trying and get to the bottom of this. Maybe I'll install all that other Lenovo updates and see if the "copy" Intel 520 SSD goes up to 500 MB/s. Maybe I'll just copy the "working 500 MB/s" Intel 520 SSD to the "copy" Intel520 SSD but this is like giving up. Jimbetto, I would recommend doing what I did. Install ALL Lenovo updates and see if your problems go away. Or, copy to a Samsung 830 and then see if your problems go away.
Any comments from the group?

Hard disk errors, but can't boot from the install DVD

My mini reports disk errors when I run the Disk Utility Verify on the main boot hard drive. However, I have not been able to boot the computer from the install DVD. I try restarting while holding down the C key, and still it boots from the internal drive. I've tried option-restart, and do not get the opportunity to select a boot disk. An external USB drive, on which I periodically clone the main disk, now does not mount. Disk Utility says it too has errors, and it is unable to repair them. A third external USB drive appears to be OK.
The computer is still operating, apparently normally, otherwise. This computer should still be under warranty. I bought it in April, as I recall.
Any help will be much appreciated.

<sigh>
I've attempted most of these things.
The drive on which I had the system clone died at essentially the same time as the problem came up with the errors on the main drive. I suspect this was due to the same root cause, or a related problem, just because of the timing. I'd cloned the main drive approximately a week previously with apparently no problem.
I also have been unable to boot from the install DVD.
The other external drive, the one that still works, is one I use mostly for rolling backups of my documents, photo and music folders. It is not big enough to hold a clone of the main drive. In any case, I'm assuming that if I attempted to clone it now, it would either not work, or I'd simply copy the errors to the clone.
I haven't used the Time Machine, since I didn't feel I had an external drive large enough to make it useful.
What 3rd party software do you recommend? Keep in mind, as I also mentioned earlier, that the computer is still under warranty, and I'm loath to do anything that could be construed as voiding the warranty.
I'm also on a pretty restricted budget, due to recent car repairs.

Bug Error but can't find what's wrong

I have a bug error next to on of my pages. I can't for the life of me find what's wrong. I have gone over every image in the page and they are all, I believe, linked the same as in the other pages but still - the bug won't shoo . When I preview, then things get really wacky. I thought I was on top of it and made some updates and then refreshed my site. Go see - www.juliakuskin.com. If you click on Children and then click on Landscape or Lifestyle, it stays on children... Please help?
-Julia

Nate,
I ended up creating a whole new page last night, linking it and posting it. The site now works but I will keep your emails in my file in case I get into this again. Thanks for your help.
-Julia
www.juliakuskin.com
ps - do you think it's a good idea to make the switch over to dreamweaver?

Email from Apple states there is a podcast error but gives no specifics. The feed validates and follows all Apple podcast spesifications.

I require information about an apparent error with my podcast feed.
I have tried numerous times to submit a podcast to Apple iTunes. There is no issue with the XML feed. It validates in both the W3C validator and the iTunes reccomended validation service.
The submision process works through iTunes without problem. However I keep receiving these email reposnes from Apple:
Dear podcast owner,
An error was encountered while trying to add your feed, [ http://feeds.mhpn.org.au/feeds/webinarsrss.aspx ].
Please correct the error and submit your feed again. For additional information, please consult the podcast FAQ at http://www.apple.com/itunes/podcasts/faq.html and technical specification at http://www.apple.com/itunes/podcasts/techspecs.html.
Sincerely,
The iTunes Store team
This email from Apple is generic and does not clarify what the error is nor how I can correct it.
I just spent over an hour and a half on the phone with Apple support. Was bumped to three consultants and two senior consultants who could not give me any information. The last senior consulatnt told me to try this forum.
Would appreciate any assistance/advice.
Thank you kindly.

iTunes Support won't help you diagnose problems in your feed. The feed validates in FeedValidator, and can be subscribed to manually in iTunes.
However, it's lacking what should be the first line:
<?xml version="1.0" encoding="UTF-8"?>
Also, the '.aspx' extension may be causing problems - this method of constructing and accessing feeds (which I don't know anything about) may not work in the Store (which is a quite different matter from the iTunes application, which is more robust). A direct link to the file, with the .xml extension, would be better.
Though it's not a fatal error, your feed is lacking the 'itunes:duration' tag - its absence may be an issue in the Store (certainly it is when people put it as 1 second, for example).
Otherwise the feed seems to be OK, but it's badly laid out which, though that shouldn't affect its usability, makes it difficult to look at for problems.
However there may be an issue with the actual media files. It's a requirement for the Store that the server can handle 'byte range requests': this is the method used by iPhones, consisting of requesting part of the file at a time rather than the entire file. The Terminal test for this shows this isn't working:
curl -I -r 200-300 http://feeds.mhpn.org.au/uploads/audio/MHPN_13_MAY_2013_RB.mp3
HTTP/1.1 416 Requested Range Not Satisfiable
Content-Length: 71741479
Content-Type: audio/mpeg
Last-Modified: Thu, 05 Sep 2013 10:27:49 GMT
Accept-Ranges: bytes
ETag: "69a1d79122aace1:0"
Server: Microsoft-IIS/7.5
X-Powered-By: ASP.NET
Date: Mon, 21 Oct 2013 06:47:36 GMT
Content-Range: bytes */0
That is likely to get you rejected, though in that case they were originally saying so in the rejection notice (normally they don't give any reason) - they may have stopped doing that. In order to deal with that you will have either to get the server sorted out or find a server which can handle it.
You may find it helpful to look at my 'get you started' page on podcasting:
http://rfwilmut.net/pc

Bootcamp: "can't partition the disk" error but disk space is not the issue

Hi all - I'm attempting to install Windows via the BootCamp assistant on a new 27" iMac. When trying to partition the disk with BootCamp Assistant, I get the message:
"The disk cannot be partitioned because some files cannot be moved. Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
The iMac does have a single volume, and it is Journaled. In researching this online, it appears that the culprit is generally having too little disk space for Boot Camp Assistant to do its job. But in this case I have a new computer with a 2 TB drive and 1.4 GB of free space, and I'm trying to create only a 250 GB NTFS partition.
I'm really not eager to delete my 2 TB drive and restore 600 GB from a Time Capsule backup unless it is absolutely necessary. Is there some other explanation for this or solution?

I have solved the issue and wanted to follow back up to record the resolution. In my case, it turned out to be an error with the disk catalog record. While trying all available options, I decided to reboot my computer from the Snow Leopard installation disc and run Disk Utility. A "verify disk" test reported that the disk needed to be "repaired." After using "Repair Disk" and restarting, Boot Camp Assistant was able to partition the disk successfully.
Thanks for the other suggestions - I think they will be useful for others.

I have a VIXIA HF R400 and I love it but I cannot find where the wireless controls are?

Were are the wireless controls on the VIXIA HF R400? The manua says what they do but not clear instructions on how to access it.

Hi bgutzman!
Using the CameraAccess app for iOS devices and Android smartphones, you can control the camcorder from a distance while you view the camcorder's image on the smartphone's screen. Not only can you control the camcorder to start and stop recording, you can also record the camcorder's image directly onto your smartphone. The CameraAccess app can be downloaded from either the Apple App Store or the Google Play Store. When this has been done:
1) Set the camcorder to receive remote control commands in the menu.
2) Activate WiFi on the settings screen.
3) Touch the access point with the same SSID as the one you saw earlier when you set the camcorder for remote control.
4) Enter the password.
5) Start the CameraAccess app.
If this is a time sensitive-matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Apple ID issues? i think i have two accounts but i cannot find out the password for the one that controols my apps!? please help!

I think I have two apple ID accounts.
The account I am using right now is Alexiaann22. Im like 99.9999% possitive that before this was my origonal account(rosepetttals).
When I am buying an app in the app store the apple id is already there and all you have to do is change the password. But the apple ID thaat is there is the Rosepetttals.
I am no longer using that email so I cannot get the password sent to it. I also cannot retrieve the password for rosepetttals because it says that the birthday I am entering is incorrect. but im pretty sure I would know my own birthday.
I know its alittle confusing but I would appreciate any feedback. Thanks you!

I am having this same issue, please help asap... I cannot listen to half of my music library and have never encountered this issue before.

I have an issue with my iPod touch gen. 5 connecting to my iTunes. iTunes says my device has an error, but it does not specify the error and I can't do nothing. I was transferring more music and editing my playlists. My songs and movies are gone.

What can I do to solve an issue with my iPod touch gen. 5 32 gb on connecting to iTunes on my computer? iTunes says there is an error with my iPod touch, which this was a result of deleting my songs and videos. I was only transferring more songs, videos and editing my playlists. I don't have that much of the songs left. What is the best solution?

And what is the wording of the error message?

Why can't safari find the democracy now server but it can find all the other 20 something servers in my bookmark bar?

I never had problems opening "democracynow.org" up until a few weeks ago. Now I can't get it at all on my computer. It is the same message, "safari can not find the server." I can get it with my mothers computer in the other room.

Do you see the folder if you are using the system navigator instead of the application navigator in JDeveloper?
Check your project properties->content and sub nodes to make sure the TopLink directory is included in the project.

Effect causing an error, but impossible to find in the TimeLine

Similar Messages

Maybe you are looking for