EJB Lock debugging
Hi All,
I enabled EJB Lock Debugging by setting
weblogic.debug.ejb.locking=true
We have around 100 CMP Entities in the System .
However, after this, I observed that many "ready" and "passivated" messages appear
in the log as below:
[BaseEJBContext] : lock obtained by: 'Scrub timer lock' on: 'Context hashcode:
'522737', primaryKe
y: '1803', flags: 'READY ', needsRefresh: 'false', needsFlush: 'false', pinCount:
'0', owner: 'Scr
ub timer lock', ejbObject hashcode: '6781345', bean hashcode: '2775737''
[BaseEJBContext] : lock released by: 'Scrub timer lock' on: 'Context hashcode:
'522737', primaryKe
y: '1803', flags: 'PASSIVATED ', needsRefresh: 'false', needsFlush: 'false', pinCount:
'1', owner:
'null', ejbObject hashcode: '0', bean hashcode: '2775737''
I see that log files are getting full very fast.. Is it that for every bean it
generates the message? After sucessful login, It again started printing above
messages (I guess for almost all entities)..
Thank you for clarifying my doubt.
Regards,
Nilesh.
I'm not sure I understand your question. If you enable to the debug
logging checks on a big system, you will definitely see lots of output.
-- Rob
Nilesh wrote:
Hi All,
I enabled EJB Lock Debugging by setting
weblogic.debug.ejb.locking=true
We have around 100 CMP Entities in the System .
However, after this, I observed that many "ready" and "passivated" messages appear
in the log as below:
[BaseEJBContext] : lock obtained by: 'Scrub timer lock' on: 'Context hashcode:
'522737', primaryKe
y: '1803', flags: 'READY ', needsRefresh: 'false', needsFlush: 'false', pinCount:
'0', owner: 'Scr
ub timer lock', ejbObject hashcode: '6781345', bean hashcode: '2775737''
[BaseEJBContext] : lock released by: 'Scrub timer lock' on: 'Context hashcode:
'522737', primaryKe
y: '1803', flags: 'PASSIVATED ', needsRefresh: 'false', needsFlush: 'false', pinCount:
'1', owner:
'null', ejbObject hashcode: '0', bean hashcode: '2775737''
I see that log files are getting full very fast.. Is it that for every bean it
generates the message? After sucessful login, It again started printing above
messages (I guess for almost all entities)..
Thank you for clarifying my doubt.
Regards,
Nilesh.
Similar Messages
-
Accessing remove EJBs while debugging using the Embedded Application Server
I'm trying to configure to debug a multi-tier application (servlets + EJBs) where a servlet accesses EJBs set up on a second OC4J application server. I've set up rmi.xml in the embedded application server to reference my second application server by adding the line.
<server host="127.0.0.1" username="admin" port="23791" password="password"/>
When I run the embedded application server it seems to hang, with the stack in
the following state:
OC4J main()
OC4J launchOC4JCommandLine()
ApplicationServer launchCommandLine()
Thread join()
Thread join(0)
Object wait(0)
The following exception is generated on the second application server
C:\Program Files\Oracle\JDeveloper9i\j2ee\home>java -jar oc4j.jar
Oracle9iAS (9.0.2.0.0) Containers for J2EE initialized
java.lang.NullPointerException
java.lang.ClassLoader com.evermind.server.rmi.RMIInputStream.getClassLoa
der()
java.lang.Class com.evermind.server.rmi.RMIInputStream.resolveClass(java
.io.ObjectStreamClass)
java.io.ObjectStreamClass java.io.ObjectInputStream.inputClassDescriptor
java.lang.Object java.io.ObjectInputStream.readObject(boolean)
java.lang.Object java.io.ObjectInputStream.readObject()
int java.io.ObjectInputStream.inputObject(boolean)
java.lang.Object java.io.ObjectInputStream.readObject(boolean)
java.lang.Object java.io.ObjectInputStream.readObject()
void com.evermind.server.rmi.RMIConnection.handleBindObject()
void com.evermind.server.rmi.RMIConnection.run()
void com.evermind.util.ThreadPoolThread.run()
Has anyone got any ideas what is happening here and how I can fix it?
Thanks,
Mark.This is an OC4J question. Try posting your message to the Products > Application Server > J2EE forum. Someone there should be able to answer your question.
-
Accessing remote EJBs while debugging using the Embedded Application Server
I'm trying to configure to debug a multi-tier application (servlets + EJBs) where a servlet accesses EJBs set up on a second OC4J application server. I've set up rmi.xml in the embedded application server to reference my second application server by adding the line.
<server host="127.0.0.1" username="admin" port="23791" password="password"/>
When I run the embedded application server it seems to hang, with the stack in
the following state:
OC4J main()
OC4J launchOC4JCommandLine()
ApplicationServer launchCommandLine()
Thread join()
Thread join(0)
Object wait(0)
The following exception is generated on the second application server
C:\Program Files\Oracle\JDeveloper9i\j2ee\home>java -jar oc4j.jar
Oracle9iAS (9.0.2.0.0) Containers for J2EE initialized
java.lang.NullPointerException
java.lang.ClassLoader com.evermind.server.rmi.RMIInputStream.getClassLoa
der()
java.lang.Class com.evermind.server.rmi.RMIInputStream.resolveClass(java
.io.ObjectStreamClass)
java.io.ObjectStreamClass java.io.ObjectInputStream.inputClassDescriptor
java.lang.Object java.io.ObjectInputStream.readObject(boolean)
java.lang.Object java.io.ObjectInputStream.readObject()
int java.io.ObjectInputStream.inputObject(boolean)
java.lang.Object java.io.ObjectInputStream.readObject(boolean)
java.lang.Object java.io.ObjectInputStream.readObject()
void com.evermind.server.rmi.RMIConnection.handleBindObject()
void com.evermind.server.rmi.RMIConnection.run()
void com.evermind.util.ThreadPoolThread.run()
Has anyone got any ideas what is happening here and how I can fix it?
Thanks,
Mark.This is an OC4J question. Try posting your message to the Products > Application Server > J2EE forum. Someone there should be able to answer your question.
-
Hi all,
everytime I execute an EJB method, I would like to lock data in order to avoid that others users access the same data. I have an Oracle table.
SAP indicates two methods:
- Enqueue Server Locking (but I can't use it because I have only a server and in anycase it doesn't works).
- Database Locking (I can't use it because I have a data-source, so no possibility to use select for update)
Perhaps I have to use "no automatic locking" in the persistent.xml and then use the EJBLocking API to lock inside the entity methods code . If this is the correct way... could you exaplain me in details how to do? There are also others solutions?
Thanks a lot. It's very important to solve the issue.
VitoHi Vito,
Did you find any solution for this issue. Could you give some tips?
Thanks,
Freddy F. -
Hi,all
Now I meet a boring problem!
I set up a web application based on EJB and Weblogic Server6.0. When test the application (two or more people to execute the same operation on the same data), the result is error. Maybe it is the concurrent problem. How to do with it? use database lock,wlserver lock, or other?
Where can I find the resources about it ?
Please help!
Thanks in advance!Your question is not at all clear.You didn't even mention abt what ejb u r using ,i mean session or entity?Where u r getting problem.
-
J2EE/JSP/EJB - ojvm debugging hangs
I'm using JDeveloper version 10.1.2.0.0 (build 1811) at following enviroment:
Server: Windows XP
Client: Windows XP
JAVA:1.4.2_04 that comes with Jdev
I have the following problem:
I have a project with *.jsp and *.java files when i try do debug a java file using
the ojvm he get's to the breakpoint then if try to the debug using step over/step into
the process hangs no exception and no coming back. If i use the others vm (hotspot, client or sever)
Jdev doesn't hang. The problem only occurs where debugging with ojvm.
When the debug process hangs no way to know what it's doing cause it's not
possible to pause (cliking the debugger pause button there's no reaction) just stopping de
process by cliking 2 times at the debug stop button.
I changed from Jdev 9.0.5.16.15 to Jdev 10.1.2.0.0 (build 1811) same problem.
Any help?I see. A logger is software that catches the fallout and presents it to you.
Well, I'm slightly resistant because I can program this stuff OK, but I work from home .. there's no backup for me, no sysad to help. I've recently moved to Linux and I'm groping around it. So I fear a day or two of non-productive farting about trying to get a logger to work, and I could do without it.
Then again, it can take me a good while to debug something blind.
So. Any recommendation for a simple logger? Are they java or do they depend on the OS? Oh, and free/open source of course :-)
Or, if anyone could tell me how to get my printlns to work that would be good too :-)
J -
EJB Primary Key not found in lock manager - Container BUG?
I have an EJB entity bean whose primary key class implementation is pretty simple, consisting of two strings. For the MOST part, it seems to work properly, but every so often I see the following message in my application server log.
####<Sep 17, 2008 10:03:27 AM EDT> <Warning> <JTA> <armantac22> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1221660207187> <BEA-110401> <Ignoring error in afterCompletion. Object=weblogic.ejb.container.internal.TxManager$TxListener@1906466, Exception=javax.ejb.EJBException: [EJB:010108]The EJB Lock Manager has received an unlock request from EJB:PortfolioMetaData with primary key:[ObjectPK: type: PortMetaData name: PortMetaData]. However, this primary key could not be found in the Lock Manager. This indicates either an EJB container bug, or the equals and hashCode methods for the primary key class:com.armanta.ejb.ObjectPK are implemented incorrectly. Please check the equals and hashCode implementations.
javax.ejb.EJBException: [EJB:010108]The EJB Lock Manager has received an unlock request from EJB:PortfolioMetaData with primary key:[ObjectPK: type: PortMetaData name: PortMetaData]. However, this primary key could not be found in the Lock Manager. This indicates either an EJB container bug, or the equals and hashCode methods for the primary key class:com.armanta.ejb.ObjectPK are implemented incorrectly. Please check the equals and hashCode implementations.
at weblogic.ejb.container.locks.ExclusiveLockManager$LockBucket.unlock(ExclusiveLockManager.java:409)
at weblogic.ejb.container.locks.ExclusiveLockManager.unlock(ExclusiveLockManager.java:170)
at weblogic.ejb.container.manager.ExclusiveEntityManager.afterCompletion(ExclusiveEntityManager.java:723)
at weblogic.ejb.container.manager.ExclusiveEntityManager.afterCompletion(ExclusiveEntityManager.java:667)
at weblogic.ejb.container.internal.TxManager$TxListener.afterCompletion(TxManager.java:984)
at weblogic.transaction.internal.ServerSCInfo.callAfterCompletions(ServerSCInfo.java:862)
at weblogic.transaction.internal.ServerTransactionImpl.callAfterCompletions(ServerTransactionImpl.java:2913)
at weblogic.transaction.internal.ServerTransactionImpl.afterCommittedStateHousekeeping(ServerTransactionImpl.java:2806)
at weblogic.transaction.internal.ServerTransactionImpl.setCommitted(ServerTransactionImpl.java:2851)
at weblogic.transaction.internal.ServerTransactionImpl.globalRetryCommit(ServerTransactionImpl.java:2650)
at weblogic.transaction.internal.ServerTransactionImpl.globalCommit(ServerTransactionImpl.java:2570)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:277)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:226)
at weblogic.ejb.container.internal.BaseEJBHome.postHomeInvoke(BaseEJBHome.java:389)
at weblogic.ejb.container.internal.EntityEJBHome.findByPrimaryKey(EntityEJBHome.java:408)
at com.armanta.ejb.portfolio.PortfolioMetaData_a4zvzk_HomeImpl.findByPrimaryKey(PortfolioMetaData_a4zvzk_HomeImpl.java:64)
at com.armanta.ejb.portfolio.PortfolioMasterBean.getPortfolioMetaData(PortfolioMasterBean.java:313)
at com.armanta.ejb.portfolio.PortfolioMaster_fmk9e8_EOImpl.getPortfolioMetaData(PortfolioMaster_fmk9e8_EOImpl.java:64)
at com.armanta.ejb.portfolio.PortfolioMaster_fmk9e8_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:517)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:224)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:407)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:403)
at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:56)
at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicServerRef.java:934)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
I checked the equals and hashCode implementations and nothing pops out at me. Once this happens, the EJB seems to get messed up in the database and I lose information!
Here is the class implementation along with its superclass. I don't see anything blatant. Sorry for the lack of indentation, my original post was indented.
Thanks
Eric
public class ObjectPK extends ArmantaPK {
private String type;
private String name;
private ObjectPK() {
super();
public ObjectPK(String type, String name) {
super();
this.type = type;
this.name = name;
public String getName() {
return name;
public String getType() {
return type;
public String toString() {
StringBuffer buffer = new StringBuffer();
buffer.append("[ObjectPK:");
buffer.append(" type: ");
buffer.append(type);
buffer.append(" name: ");
buffer.append(name);
buffer.append("]");
return buffer.toString();
* Returns <code>true</code> if this <code>ObjectPK</code> is the same as the o argument.
* @return <code>true</code> if this <code>ObjectPK</code> is the same as the o argument.
public boolean equals(Object o) {
if (this == o) {
return true;
if (!super.equals(o)) {
return false;
if (o == null) {
return false;
if (o.getClass() != getClass()) {
return false;
ObjectPK castedObj = (ObjectPK) o;
return ((this.type == null ? castedObj.type == null : this.type
.equals(castedObj.type)) && (this.name == null
? castedObj.name == null
: this.name.equals(castedObj.name)));
* Override hashCode.
* @return the Objects hashcode.
public int hashCode() {
int hashCode = super.hashCode();
hashCode = 31 * hashCode + (type == null ? 0 : type.hashCode());
hashCode = 31 * hashCode + (name == null ? 0 : name.hashCode());
return hashCode;
public Object clone() {
ObjectPK inst = new ObjectPK();
inst.type = this.type == null ? null : new String(this.type);
inst.name = this.name == null ? null : new String(this.name);
return inst;
public abstract class ArmantaPK implements Serializable, Cloneable, Comparable {
// Enforce compatability with future versions
private static final long serialVersionUID = 1980721424128862564L;
// Cache the hash code
private transient int hash = 0;
* Clones a primary key. Note that this is not a deep copy.
* @return the cloned primary key
public Object clone() throws CloneNotSupportedException {
ArmantaPK newKey = (ArmantaPK) super.clone();
newKey.hash = 0;
return newKey;
* Compare the specified object with this key for equality.
* Implementations should return <tt>true</tt>
* if and only if the specified object is also a key
* of the same class and all corresponding attributes in the keys are
* <i>equal</i>.
* @param other the object to be compared for equality with this key.
* @return <tt>true</tt> if the specified object is equal to this key.
public boolean equals(Object other) {
return other instanceof ArmantaPK;
* This implementation only returns an empty String.
* @return String
public String toString() {
return "";
* Return the hash code value for this key. Implemented to call the
* key's <code>computeHash</code> method and cache the result for
* faster operation. Classes extending <code>ArmantaPK</code> should
* only implement <code>computeHash</code>.
* @return int
public int hashCode() {
if (hash == 0) {
hash = computeHash();
return hash;
* @y.exclude
* Compute a hash code for this key. This is the method that should
* be overridden by sub-classes.
* @return int
protected int computeHash() {
return 0;
* @y.exclude
* After called, will force the hash code to get recomputed.
public void rehash() {
hash = 0;
* Compares this <tt>ArmantaPK</tt> to another object by comparing
* their string representations.
* @return an integer based upon comparing the <tt>ArmantaPK</tt>s string
* representations
public int compareTo(Object o) {
return toString().compareTo(o.toString());
}We are experiencing a similar error after upgrading 9.2 to 9.2 MP3. We do not want to upgrade to 10g at this time. Is there a patch we can download with the fix?
-
I've just installed Archlinux on a brand new Dell Latitude E6520
This laptop has a nvidia quadro nvs 4200m and an intel card. I've disabled optimus in the bios and I'm using the nvidia binary drivers.
I've had a couple of hard locks, no response at all, I cannot switch to tty1 or anything else. This mostly happens after I've been seeing a flash movie.
EDIT: some more information. This is in Gnome Shell with Chromium. The problem seems to always occur on closing a tab with a youtube video in it.
It also seem like it's just the screen that locks (the mouse can be moved) and I could see a torrent updating on my android phone (transdroid - transmission)
Does anyone have an idea what could be wrong?
This is the output of dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.1-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20111223 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jan 13 06:50:31 CET 2012
[ 0.000000] Command line: root=/dev/sda6 ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000091400 (usable)
[ 0.000000] BIOS-e820: 0000000000091400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf225000 (usable)
[ 0.000000] BIOS-e820: 00000000cf225000 - 00000000cf269000 (reserved)
[ 0.000000] BIOS-e820: 00000000cf269000 - 00000000cf5b7000 (usable)
[ 0.000000] BIOS-e820: 00000000cf5b7000 - 00000000cf5e7000 (reserved)
[ 0.000000] BIOS-e820: 00000000cf5e7000 - 00000000cf7e7000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cf7e7000 - 00000000cf7ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cf7ff000 - 00000000cf800000 (usable)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 00000000ffc20000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000022e000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Dell Inc. Latitude E6520/0J4TFW, BIOS A08 10/18/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x22e000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF0000000 write-back
[ 0.000000] 3 base 100000000 mask F00000000 write-back
[ 0.000000] 4 base 200000000 mask FE0000000 write-back
[ 0.000000] 5 base 220000000 mask FF0000000 write-back
[ 0.000000] 6 base 22E000000 mask FFE000000 uncachable
[ 0.000000] 7 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xcf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f1a30] f1a30
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000008c000] 8c000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cf800000
[ 0.000000] 0000000000 - 00cf800000 page 2M
[ 0.000000] kernel direct mapping tables up to cf800000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000022e000000
[ 0.000000] 0100000000 - 022e000000 page 2M
[ 0.000000] kernel direct mapping tables up to 22e000000 @ cf5ad000-cf5b7000
[ 0.000000] RAMDISK: 37d7f000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fe300 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000cf7fde18 00084 (v01 DELL CBX3 06222004 MSFT 00010013)
[ 0.000000] ACPI: FACP 00000000cf787d98 000F4 (v04 DELL CBX3 06222004 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110623/tbfadt-369)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xCF7E4E40/0x00000000CF7E4D40, using 32 (20110623/tbfadt-489)
[ 0.000000] ACPI: DSDT 00000000cf755018 08774 (v02 INT430 SYSFexxx 00001001 INTL 20090903)
[ 0.000000] ACPI: FACS 00000000cf7e4e40 00040
[ 0.000000] ACPI: APIC 00000000cf7fcf18 000CC (v02 DELL CBX3 06222004 MSFT 00010013)
[ 0.000000] ACPI: TCPA 00000000cf7e5d18 00032 (v02 00000000 00000000)
[ 0.000000] ACPI: SSDT 00000000cf788a98 002F9 (v01 DELLTP TPM 00003000 INTL 20090903)
[ 0.000000] ACPI: MCFG 00000000cf7e5c98 0003C (v01 DELL SNDYBRDG 06222004 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cf7e5c18 00038 (v01 A M I PCHHPET 06222004 AMI. 00000003)
[ 0.000000] ACPI: BOOT 00000000cf7e5b98 00028 (v01 DELL CBX3 06222004 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000cf76c018 00804 (v01 PmRef Cpu0Ist 00003000 INTL 20090903)
[ 0.000000] ACPI: SSDT 00000000cf76b018 00996 (v01 PmRef CpuPm 00003000 INTL 20090903)
[ 0.000000] ACPI: DMAR 00000000cf7e4a18 000B0 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: SLIC 00000000cf775c18 00176 (v03 DELL CBX3 06222004 MSFT 00010013)
[ 0.000000] ACPI: SSDT 00000000cf773018 014A0 (v01 NvdRef NvdTabl 00001000 INTL 20090903)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000022e000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000022e000000
[ 0.000000] NODE_DATA [000000022dffb000 - 000000022dffffff]
[ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880225600000-ffff88022d5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0022e000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000091
[ 0.000000] 0: 0x00000100 -> 0x000cf225
[ 0.000000] 0: 0x000cf269 -> 0x000cf5b7
[ 0.000000] 0: 0x000cf7ff -> 0x000cf800
[ 0.000000] 0: 0x00100000 -> 0x0022e000
[ 0.000000] On node 0 totalpages: 2086133
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3900 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 828852 pages, LIFO batch:31
[ 0.000000] Normal zone: 19328 pages used for memmap
[ 0.000000] Normal zone: 1217664 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 16 CPUs, 8 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000091000 - 0000000000092000
[ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cf225000 - 00000000cf269000
[ 0.000000] PM: Registered nosave memory: 00000000cf5b7000 - 00000000cf5e7000
[ 0.000000] PM: Registered nosave memory: 00000000cf5e7000 - 00000000cf7e7000
[ 0.000000] PM: Registered nosave memory: 00000000cf7e7000 - 00000000cf7ff000
[ 0.000000] PM: Registered nosave memory: 00000000cf800000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffc20000
[ 0.000000] PM: Registered nosave memory: 00000000ffc20000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cf800000 (gap: cf800000:2f51c000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022dc00000 s82048 r8192 d24448 u131072
[ 0.000000] pcpu-alloc: s82048 r8192 d24448 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2050416
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda6 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8131928k/9142272k available (4279k kernel code, 797740k absent, 212604k reserved, 4601k data, 728k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:808 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 2395.118 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4792.82 BogoMIPS (lpj=7983726)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000030] Security Framework initialized
[ 0.000034] AppArmor: AppArmor disabled by boot time parameter
[ 0.000695] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002396] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003076] Mount-cache hash table entries: 256
[ 0.003181] Initializing cgroup subsys cpuacct
[ 0.003186] Initializing cgroup subsys memory
[ 0.003192] Initializing cgroup subsys devices
[ 0.003194] Initializing cgroup subsys freezer
[ 0.003195] Initializing cgroup subsys net_cls
[ 0.003197] Initializing cgroup subsys blkio
[ 0.003225] CPU: Physical Processor ID: 0
[ 0.003226] CPU: Processor Core ID: 0
[ 0.003230] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.003231] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.003234] mce: CPU supports 9 MCE banks
[ 0.003247] CPU0: Thermal monitoring enabled (TM1)
[ 0.003256] using mwait in idle threads.
[ 0.004417] ACPI: Core revision 20110623
[ 0.010455] ftrace: allocating 16773 entries in 66 pages
[ 0.016524] DMAR: Host address width 36
[ 0.016526] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.016534] IOMMU 0: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.016536] DMAR: RMRR base: 0x000000cf5c6000 end: 0x000000cf5d5fff
[ 0.016607] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 0
[ 0.016608] HPET id 0 under DRHD base 0xfed91000
[ 0.016609] HPET id 0 under DRHD base 0xfed91000
[ 0.016610] HPET id 0 under DRHD base 0xfed91000
[ 0.016611] HPET id 0 under DRHD base 0xfed91000
[ 0.016612] HPET id 0 under DRHD base 0xfed91000
[ 0.016614] HPET id 0 under DRHD base 0xfed91000
[ 0.016615] HPET id 0 under DRHD base 0xfed91000
[ 0.016616] HPET id 0 under DRHD base 0xfed91000
[ 0.016704] Enabled IRQ remapping in x2apic mode
[ 0.016705] Enabling x2apic
[ 0.016706] Enabled x2apic
[ 0.016711] Switched APIC routing to cluster x2apic.
[ 0.017136] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.050099] CPU0: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz stepping 07
[ 0.154389] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[ 0.154394] PEBS disabled due to CPU errata.
[ 0.154396] ... version: 3
[ 0.154397] ... bit width: 48
[ 0.154398] ... generic registers: 4
[ 0.154399] ... value mask: 0000ffffffffffff
[ 0.154401] ... max period: 000000007fffffff
[ 0.154402] ... fixed-purpose events: 3
[ 0.154403] ... event mask: 000000070000000f
[ 0.174525] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.201013] Booting Node 0, Processors #1
[ 0.201020] smpboot cpu 1: start_ip = 8c000
[ 0.314305] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.334169] #2
[ 0.334172] smpboot cpu 2: start_ip = 8c000
[ 0.447449] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.467295] #3
[ 0.467298] smpboot cpu 3: start_ip = 8c000
[ 0.580576] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.600430] #4
[ 0.600433] smpboot cpu 4: start_ip = 8c000
[ 0.713670] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.733570] #5
[ 0.733574] smpboot cpu 5: start_ip = 8c000
[ 0.846855] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.866707] #6
[ 0.866710] smpboot cpu 6: start_ip = 8c000
[ 0.979989] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.999833] #7
[ 0.999837] smpboot cpu 7: start_ip = 8c000
[ 1.113508] NMI watchdog enabled, takes one hw-pmu counter.
[ 1.119625] Brought up 8 CPUs
[ 1.119631] Total of 8 processors activated (38369.65 BogoMIPS).
[ 1.126941] devtmpfs: initialized
[ 1.127773] PM: Registering ACPI NVS region at cf5e7000 (2097152 bytes)
[ 1.128489] print_constraints: dummy:
[ 1.128525] NET: Registered protocol family 16
[ 1.128610] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 1.128612] ACPI: bus type pci registered
[ 1.128680] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 1.128683] PCI: not using MMCONFIG
[ 1.128684] PCI: Using configuration type 1 for base access
[ 1.128692] dmi type 0xB1 record - unknown flag
[ 1.129167] bio: create slab <bio-0> at 0
[ 1.129214] ACPI: Added _OSI(Module Device)
[ 1.129215] ACPI: Added _OSI(Processor Device)
[ 1.129217] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 1.129219] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.130580] ACPI: EC: Look up EC in DSDT
[ 1.134328] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 1.209853] ACPI: SSDT 00000000cf5d7798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903)
[ 1.210224] ACPI: Dynamic OEM Table Load:
[ 1.210227] ACPI: SSDT (null) 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903)
[ 1.219718] ACPI: SSDT 00000000cf5d8a98 00303 (v01 PmRef ApIst 00003000 INTL 20090903)
[ 1.220112] ACPI: Dynamic OEM Table Load:
[ 1.220114] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20090903)
[ 1.229586] ACPI: SSDT 00000000cf5d6d98 00119 (v01 PmRef ApCst 00003000 INTL 20090903)
[ 1.229951] ACPI: Dynamic OEM Table Load:
[ 1.229953] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20090903)
[ 1.299445] ACPI: Interpreter enabled
[ 1.299447] ACPI: (supports S0 S3 S4 S5)
[ 1.299468] ACPI: Using IOAPIC for interrupt routing
[ 1.299484] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 1.299835] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 1.905755] ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930
[ 1.948489] ACPI: No dock devices found.
[ 1.948491] HEST: Table not found.
[ 1.948494] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.948762] \_SB_.PCI0:_OSC invalid UUID
[ 1.948764] _OSC request data:1 8 1f
[ 1.948767] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 1.949244] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.949246] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.949248] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.949251] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xfeafffff]
[ 1.949253] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 1.949263] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
[ 1.949296] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[ 1.949320] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.949322] pci 0000:00:01.0: PME# disabled
[ 1.949366] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[ 1.949390] pci 0000:00:16.0: reg 10: [mem 0xe67b0000-0xe67b000f 64bit]
[ 1.949453] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.949458] pci 0000:00:16.0: PME# disabled
[ 1.949487] pci 0000:00:19.0: [8086:1502] type 0 class 0x000200
[ 1.949505] pci 0000:00:19.0: reg 10: [mem 0xe6700000-0xe671ffff]
[ 1.949514] pci 0000:00:19.0: reg 14: [mem 0xe6780000-0xe6780fff]
[ 1.949524] pci 0000:00:19.0: reg 18: [io 0x5040-0x505f]
[ 1.949574] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 1.949578] pci 0000:00:19.0: PME# disabled
[ 1.949602] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[ 1.949623] pci 0000:00:1a.0: reg 10: [mem 0xe6770000-0xe67703ff]
[ 1.949696] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.949701] pci 0000:00:1a.0: PME# disabled
[ 1.949724] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[ 1.949739] pci 0000:00:1b.0: reg 10: [mem 0xe6760000-0xe6763fff 64bit]
[ 1.949794] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.949798] pci 0000:00:1b.0: PME# disabled
[ 1.949823] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[ 1.949920] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.949926] pci 0000:00:1c.0: PME# disabled
[ 1.949961] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
[ 1.950061] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.950066] pci 0000:00:1c.1: PME# disabled
[ 1.950101] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
[ 1.950201] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.950206] pci 0000:00:1c.2: PME# disabled
[ 1.950241] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
[ 1.950339] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.950344] pci 0000:00:1c.3: PME# disabled
[ 1.950376] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
[ 1.950442] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.950446] pci 0000:00:1c.5: PME# disabled
[ 1.950477] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[ 1.950498] pci 0000:00:1d.0: reg 10: [mem 0xe6750000-0xe67503ff]
[ 1.950571] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.950576] pci 0000:00:1d.0: PME# disabled
[ 1.950601] pci 0000:00:1f.0: [8086:1c4f] type 0 class 0x000601
[ 1.950715] pci 0000:00:1f.2: [8086:282a] type 0 class 0x000104
[ 1.950734] pci 0000:00:1f.2: reg 10: [io 0x5090-0x5097]
[ 1.950742] pci 0000:00:1f.2: reg 14: [io 0x5080-0x5083]
[ 1.950750] pci 0000:00:1f.2: reg 18: [io 0x5070-0x5077]
[ 1.950758] pci 0000:00:1f.2: reg 1c: [io 0x5060-0x5063]
[ 1.950767] pci 0000:00:1f.2: reg 20: [io 0x5020-0x503f]
[ 1.950775] pci 0000:00:1f.2: reg 24: [mem 0xe6740000-0xe67407ff]
[ 1.950807] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.950811] pci 0000:00:1f.2: PME# disabled
[ 1.950829] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[ 1.950844] pci 0000:00:1f.3: reg 10: [mem 0xe6730000-0xe67300ff 64bit]
[ 1.950866] pci 0000:00:1f.3: reg 20: [io 0x5000-0x501f]
[ 1.950922] pci 0000:01:00.0: [10de:1056] type 0 class 0x000300
[ 1.950930] pci 0000:01:00.0: reg 10: [mem 0xe4000000-0xe4ffffff]
[ 1.950939] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.950948] pci 0000:01:00.0: reg 1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
[ 1.950954] pci 0000:01:00.0: reg 24: [io 0x4000-0x407f]
[ 1.950960] pci 0000:01:00.0: reg 30: [mem 0xe5000000-0xe507ffff pref]
[ 1.950995] pci 0000:01:00.1: [10de:0e08] type 0 class 0x000403
[ 1.951003] pci 0000:01:00.1: reg 10: [mem 0xe5080000-0xe5083fff]
[ 1.951059] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.951061] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 1.951064] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe50fffff]
[ 1.951067] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 1.951136] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.951381] pci 0000:03:00.0: [8086:0082] type 0 class 0x000280
[ 1.951530] pci 0000:03:00.0: reg 10: [mem 0xe6600000-0xe6601fff 64bit]
[ 1.952110] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 1.952145] pci 0000:03:00.0: PME# disabled
[ 1.952317] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.952323] pci 0000:00:1c.1: bridge window [mem 0xe6600000-0xe66fffff]
[ 1.952373] pci 0000:00:1c.2: PCI bridge to [bus 04-09]
[ 1.952377] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 1.952381] pci 0000:00:1c.2: bridge window [mem 0xe5b00000-0xe64fffff]
[ 1.952388] pci 0000:00:1c.2: bridge window [mem 0xe2b00000-0xe34fffff 64bit pref]
[ 1.952433] pci 0000:00:1c.3: PCI bridge to [bus 0a-0a]
[ 1.952437] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 1.952442] pci 0000:00:1c.3: bridge window [mem 0xe5100000-0xe5afffff]
[ 1.952448] pci 0000:00:1c.3: bridge window [mem 0xe2100000-0xe2afffff 64bit pref]
[ 1.952536] pci 0000:0b:00.0: [1217:13f7] type 0 class 0x000c00
[ 1.952570] pci 0000:0b:00.0: reg 10: [mem 0xe6530000-0xe6530fff]
[ 1.952769] pci 0000:0b:00.0: supports D1 D2
[ 1.952771] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.952779] pci 0000:0b:00.0: PME# disabled
[ 1.952855] pci 0000:0b:00.1: [1217:8321] type 0 class 0x000805
[ 1.952889] pci 0000:0b:00.1: reg 10: [mem 0xe6520000-0xe65201ff]
[ 1.953089] pci 0000:0b:00.1: supports D1 D2
[ 1.953091] pci 0000:0b:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.953099] pci 0000:0b:00.1: PME# disabled
[ 1.953169] pci 0000:0b:00.2: [1217:8331] type 0 class 0x000180
[ 1.953202] pci 0000:0b:00.2: reg 10: [mem 0xe6510000-0xe65103ff]
[ 1.953246] pci 0000:0b:00.2: reg 18: [mem 0xe6500000-0xe65003ff]
[ 1.953404] pci 0000:0b:00.2: supports D1 D2
[ 1.953406] pci 0000:0b:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.953414] pci 0000:0b:00.2: PME# disabled
[ 1.953509] pci 0000:00:1c.5: PCI bridge to [bus 0b-0b]
[ 1.953516] pci 0000:00:1c.5: bridge window [mem 0xe6500000-0xe65fffff]
[ 1.953548] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.953660] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.953687] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 1.953712] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 1.953739] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 1.953767] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 1.953801] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 1.953863] \_SB_.PCI0:_OSC invalid UUID
[ 1.953864] _OSC request data:1 1f 1f
[ 1.953868] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.953893] \_SB_.PCI0:_OSC invalid UUID
[ 1.953895] _OSC request data:1 0 1d
[ 1.953898] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 1.953899] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1.956866] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.956905] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 1.956942] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.956977] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 1.957013] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 1.957050] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 1.957086] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 1.957123] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 1.957205] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.957208] vgaarb: loaded
[ 1.957209] vgaarb: bridge control possible 0000:01:00.0
[ 1.957258] PCI: Using ACPI for IRQ routing
[ 1.958763] PCI: pci_cache_line_size set to 64 bytes
[ 1.958852] reserve RAM buffer: 0000000000091400 - 000000000009ffff
[ 1.958854] reserve RAM buffer: 00000000cf225000 - 00000000cfffffff
[ 1.958856] reserve RAM buffer: 00000000cf5b7000 - 00000000cfffffff
[ 1.958858] reserve RAM buffer: 00000000cf800000 - 00000000cfffffff
[ 1.958860] reserve RAM buffer: 000000022e000000 - 000000022fffffff
[ 1.958938] NetLabel: Initializing
[ 1.958939] NetLabel: domain hash size = 128
[ 1.958940] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.958952] NetLabel: unlabeled traffic allowed by default
[ 1.958967] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.958972] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.961986] Switching to clocksource hpet
[ 1.966608] pnp: PnP ACPI init
[ 1.966621] ACPI: bus type pnp registered
[ 1.966883] pnp 00:00: [bus 00-3e]
[ 1.966885] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.966887] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.966889] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.966891] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.966893] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.966894] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.966896] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.966898] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.966899] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.966901] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.966903] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.966905] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.966906] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.966908] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.966910] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.966911] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.966913] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 1.966915] pnp 00:00: [mem 0xd0000000-0xfeafffff window]
[ 1.966917] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 1.966968] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.966982] pnp 00:01: [io 0x0000-0x001f]
[ 1.966984] pnp 00:01: [io 0x0081-0x0091]
[ 1.966985] pnp 00:01: [io 0x0093-0x009f]
[ 1.966987] pnp 00:01: [io 0x00c0-0x00df]
[ 1.966988] pnp 00:01: [dma 4]
[ 1.967007] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.967014] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 1.967032] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.967094] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 1.967127] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[ 1.967130] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 1.967138] pnp 00:04: [io 0x00f0]
[ 1.967149] pnp 00:04: [irq 13]
[ 1.967168] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.967176] pnp 00:05: [io 0x002e-0x002f]
[ 1.967178] pnp 00:05: [io 0x004e-0x004f]
[ 1.967179] pnp 00:05: [io 0x0061]
[ 1.967180] pnp 00:05: [io 0x0063]
[ 1.967182] pnp 00:05: [io 0x0065]
[ 1.967183] pnp 00:05: [io 0x0067]
[ 1.967184] pnp 00:05: [io 0x0070]
[ 1.967186] pnp 00:05: [io 0x0080]
[ 1.967187] pnp 00:05: [io 0x0092]
[ 1.967188] pnp 00:05: [io 0x00b2-0x00b3]
[ 1.967190] pnp 00:05: [io 0x0680-0x069f]
[ 1.967191] pnp 00:05: [io 0x1000-0x100f]
[ 1.967193] pnp 00:05: [io 0xffff]
[ 1.967194] pnp 00:05: [io 0xffff]
[ 1.967195] pnp 00:05: [io 0x0400-0x047f]
[ 1.967197] pnp 00:05: [io 0x0500-0x057f]
[ 1.967198] pnp 00:05: [io 0x164e-0x164f]
[ 1.967233] system 00:05: [io 0x0680-0x069f] has been reserved
[ 1.967235] system 00:05: [io 0x1000-0x100f] has been reserved
[ 1.967237] system 00:05: [io 0xffff] has been reserved
[ 1.967239] system 00:05: [io 0xffff] has been reserved
[ 1.967241] system 00:05: [io 0x0400-0x047f] has been reserved
[ 1.967243] system 00:05: [io 0x0500-0x057f] has been reserved
[ 1.967245] system 00:05: [io 0x164e-0x164f] has been reserved
[ 1.967248] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.967254] pnp 00:06: [io 0x0070-0x0077]
[ 1.967260] pnp 00:06: [irq 8]
[ 1.967280] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.967287] pnp 00:07: [io 0x0060]
[ 1.967289] pnp 00:07: [io 0x0064]
[ 1.967295] pnp 00:07: [irq 1]
[ 1.967313] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 2.261804] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (disabled)
[ 2.261817] pnp 00:09: [irq 12]
[ 2.261839] pnp 00:09: Plug and Play ACPI device, IDs DLL0494 PNP0f13 (active)
[ 2.261970] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 2.261972] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
[ 2.261974] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 2.261975] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 2.261977] pnp 00:0a: [mem 0xf8000000-0xfbffffff]
[ 2.261978] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 2.261980] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
[ 2.261981] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[ 2.261983] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 2.261984] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 2.261986] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 2.261988] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 2.262035] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 2.262038] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 2.262040] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 2.262042] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 2.262044] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
[ 2.262046] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 2.262048] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 2.262050] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 2.262052] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[ 2.262055] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved
[ 2.262057] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.368290] pnp 00:0b: [irq 23]
[ 2.368321] pnp 00:0b: Plug and Play ACPI device, IDs SMO8800 (active)
[ 2.901044] pnp 00:0c: can't evaluate _CRS: 12311
[ 2.901163] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 2.901224] pnp: PnP ACPI: found 13 devices
[ 2.901225] ACPI: ACPI bus type pnp unregistered
[ 2.907642] PCI: max bus depth: 1 pci_try_num: 2
[ 2.907686] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 2.907689] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 2.907692] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe50fffff]
[ 2.907695] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 2.907698] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 2.907710] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 2.907715] pci 0000:00:1c.1: bridge window [mem 0xe6600000-0xe66fffff]
[ 2.907723] pci 0000:00:1c.2: PCI bridge to [bus 04-09]
[ 2.907727] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 2.907732] pci 0000:00:1c.2: bridge window [mem 0xe5b00000-0xe64fffff]
[ 2.907737] pci 0000:00:1c.2: bridge window [mem 0xe2b00000-0xe34fffff 64bit pref]
[ 2.907743] pci 0000:00:1c.3: PCI bridge to [bus 0a-0a]
[ 2.907746] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 2.907752] pci 0000:00:1c.3: bridge window [mem 0xe5100000-0xe5afffff]
[ 2.907756] pci 0000:00:1c.3: bridge window [mem 0xe2100000-0xe2afffff 64bit pref]
[ 2.907763] pci 0000:00:1c.5: PCI bridge to [bus 0b-0b]
[ 2.907768] pci 0000:00:1c.5: bridge window [mem 0xe6500000-0xe65fffff]
[ 2.907788] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.907791] pci 0000:00:01.0: setting latency timer to 64
[ 2.907798] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.907802] pci 0000:00:1c.0: setting latency timer to 64
[ 2.907813] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.907817] pci 0000:00:1c.1: setting latency timer to 64
[ 2.907828] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.907833] pci 0000:00:1c.2: setting latency timer to 64
[ 2.907844] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.907848] pci 0000:00:1c.3: setting latency timer to 64
[ 2.907855] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.907859] pci 0000:00:1c.5: setting latency timer to 64
[ 2.907863] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 2.907865] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 2.907867] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.907869] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfeafffff]
[ 2.907871] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 2.907873] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 2.907875] pci_bus 0000:01: resource 1 [mem 0xe4000000-0xe50fffff]
[ 2.907876] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 2.907879] pci_bus 0000:03: resource 1 [mem 0xe6600000-0xe66fffff]
[ 2.907881] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 2.907882] pci_bus 0000:04: resource 1 [mem 0xe5b00000-0xe64fffff]
[ 2.907884] pci_bus 0000:04: resource 2 [mem 0xe2b00000-0xe34fffff 64bit pref]
[ 2.907886] pci_bus 0000:0a: resource 0 [io 0x2000-0x2fff]
[ 2.907888] pci_bus 0000:0a: resource 1 [mem 0xe5100000-0xe5afffff]
[ 2.907890] pci_bus 0000:0a: resource 2 [mem 0xe2100000-0xe2afffff 64bit pref]
[ 2.907892] pci_bus 0000:0b: resource 1 [mem 0xe6500000-0xe65fffff]
[ 2.907916] NET: Registered protocol family 2
[ 2.908115] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 2.908943] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 2.910176] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.910301] TCP: Hash tables configured (established 524288 bind 65536)
[ 2.910303] TCP reno registered
[ 2.910320] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 2.910353] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 2.910446] NET: Registered protocol family 1
[ 2.910559] pci 0000:01:00.0: Boot video device
[ 2.910582] PCI: CLS 64 bytes, default 64
[ 2.910623] Unpacking initramfs...
[ 2.941993] Freeing initrd memory: 2500k freed
[ 2.942232] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.942234] Placing 64MB software IO TLB between ffff8800cb225000 - ffff8800cf225000
[ 2.942236] software IO TLB at phys 0xcb225000 - 0xcf225000
[ 2.942252] Simple Boot Flag at 0xf3 set to 0x1
[ 2.942809] audit: initializing netlink socket (disabled)
[ 2.942818] type=2000 audit(1327170869.719:1): initialized
[ 2.952233] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.971773] VFS: Disk quotas dquot_6.5.2
[ 2.971823] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.971901] msgmni has been set to 15887
[ 2.972033] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.972054] io scheduler noop registered
[ 2.972055] io scheduler deadline registered
[ 2.972083] io scheduler cfq registered (default)
[ 2.972164] pcieport 0000:00:01.0: setting latency timer to 64
[ 2.972192] pcieport 0000:00:01.0: irq 41 for MSI/MSI-X
[ 2.972515] intel_idle: MWAIT substates: 0x21120
[ 2.972517] intel_idle: v0.4 model 0x2A
[ 2.972518] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.972569] ERST: Table is not found!
[ 2.972570] GHES: HEST is not enabled!
[ 2.972615] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 3.223771] Linux agpgart interface v0.103
[ 3.223852] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.224055] i8042: Warning: Keylock active
[ 3.225294] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.225305] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.225409] mousedev: PS/2 mouse device common for all mice
[ 3.225438] rtc_cmos 00:06: RTC can wake from S4
[ 3.225568] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 3.225598] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 3.225805] cpuidle: using governor ladder
[ 3.226119] cpuidle: using governor menu
[ 3.226278] TCP cubic registered
[ 3.226280] NET: Registered protocol family 17
[ 3.226287] Registering the dns_resolver key type
[ 3.226330] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 3.226399] PM: Hibernation image not present or could not be loaded.
[ 3.226403] registered taskstats version 1
[ 3.330608] rtc_cmos 00:06: setting system clock to 2012-01-21 18:34:30 UTC (1327170870)
[ 3.330648] Initializing network drop monitor service
[ 3.331805] Freeing unused kernel memory: 728k freed
[ 3.331879] Write protecting the kernel read-only data: 8192k
[ 3.336886] Freeing unused kernel memory: 1848k freed
[ 3.338985] Freeing unused kernel memory: 696k freed
[ 3.346637] udevd[62]: starting version 175
[ 3.373920] usbcore: registered new interface driver usbfs
[ 3.373946] usbcore: registered new interface driver hub
[ 3.373985] usbcore: registered new device driver usb
[ 3.374685] SCSI subsystem initialized
[ 3.374842] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.374865] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.374895] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.374899] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 3.374921] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.374947] ehci_hcd 0000:00:1a.0: debug port 2
[ 3.378261] libata version 3.00 loaded.
[ 3.378830] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 3.378848] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xe6770000
[ 3.390100] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.390262] hub 1-0:1.0: USB hub found
[ 3.390266] hub 1-0:1.0: 2 ports detected
[ 3.390336] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.390415] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.390418] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 3.390426] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.390451] ehci_hcd 0000:00:1d.0: debug port 2
[ 3.394340] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 3.394356] ehci_hcd 0000:00:1d.0: irq 17, io mem 0xe6750000
[ 3.406750] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.406906] hub 2-0:1.0: USB hub found
[ 3.406910] hub 2-0:1.0: 2 ports detected
[ 3.407025] ahci 0000:00:1f.2: version 3.0
[ 3.407039] ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.407125] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 3.407153] ahci: SSS flag set, parallel bus scan disabled
[ 3.420086] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl RAID mode
[ 3.420090] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 3.420096] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.447308] scsi0 : ahci
[ 3.447476] scsi1 : ahci
[ 3.447634] scsi2 : ahci
[ 3.447824] scsi3 : ahci
[ 3.447980] scsi4 : ahci
[ 3.448128] scsi5 : ahci
[ 3.696308] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 3.820574] hub 1-1:1.0: USB hub found
[ 3.820741] hub 1-1:1.0: 6 ports detected
[ 3.925982] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 3.942601] Refined TSC clocksource calibration: 2394.560 MHz.
[ 3.942607] Switching to clocksource tsc
[ 4.049970] hub 2-1:1.0: USB hub found
[ 4.050017] hub 2-1:1.0: 8 ports detected
[ 4.115834] ata1: SATA max UDMA/133 abar m2048@0xe6740000 port 0xe6740100 irq 42
[ 4.115839] ata2: SATA max UDMA/133 abar m2048@0xe6740000 port 0xe6740180 irq 42
[ 4.115841] ata3: DUMMY
[ 4.115844] ata4: SATA max UDMA/133 abar m2048@0xe6740000 port 0xe6740280 irq 42
[ 4.115848] ata5: SATA max UDMA/133 abar m2048@0xe6740000 port 0xe6740300 irq 42
[ 4.115851] ata6: SATA max UDMA/133 abar m2048@0xe6740000 port 0xe6740380 irq 42
[ 4.315609] usb 2-1.3: new full-speed USB device number 3 using ehci_hcd
[ 4.430812] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input1
[ 4.430911] generic-usb 0003:046D:C526.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.3/input0
[ 4.433014] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input2
[ 4.433285] generic-usb 0003:046D:C526.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.3/input1
[ 4.433299] usbcore: registered new interface driver usbhid
[ 4.433300] usbhid: USB HID core driver
[ 4.435196] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.468605] usb 2-1.8: new full-speed USB device number 4 using ehci_hcd
[ 4.578165] usb 2-1.8: config 0 descriptor??
[ 4.731814] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 4.757591] ata1.00: ATA-8: ST320LT020-9YG142, 0003DEM1, max UDMA/133
[ 4.757594] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 5.031427] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 5.031862] ata1.00: configured for UDMA/133
[ 5.037876] scsi 0:0:0:0: Direct-Access ATA ST320LT020-9YG14 0003 PQ: 0 ANSI: 5
[ 5.357163] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.359389] ata2.00: ATAPI: MATSHITA DVD+/-RW UJ8B2, 1.01, max UDMA/100
[ 5.361668] ata2.00: configured for UDMA/100
[ 5.363879] scsi 1:0:0:0: CD-ROM MATSHITA DVD+-RW UJ8B2 1.01 PQ: 0 ANSI: 5
[ 5.683344] ata4: SATA link down (SStatus 0 SControl 300)
[ 6.002867] ata5: SATA link down (SStatus 0 SControl 300)
[ 6.322394] ata6: SATA link down (SStatus 0 SControl 300)
[ 6.327719] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 6.327723] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 6.327800] sd 0:0:0:0: [sda] Write Protect is off
[ 6.327804] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.327834] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.329859] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.329868] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.330052] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 6.449243] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 6.450747] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.338185] EXT4-fs (sda6): INFO: recovery required on readonly filesystem
[ 7.338188] EXT4-fs (sda6): write access will be enabled during recovery
[ 10.955863] EXT4-fs (sda6): orphan cleanup on readonly fs
[ 10.955871] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523699
[ 10.955918] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523418
[ 10.955931] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523574
[ 10.955944] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523423
[ 10.955953] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523421
[ 10.955962] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523419
[ 10.955971] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523417
[ 10.955980] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523237
[ 10.955992] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523255
[ 10.956001] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523254
[ 10.956011] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523241
[ 10.956020] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523238
[ 10.956029] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523236
[ 10.956038] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523178
[ 10.956047] EXT4-fs (sda6): 14 orphan inodes deleted
[ 10.956049] EXT4-fs (sda6): recovery complete
[ 13.645965] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 15.112195] udevd[252]: starting version 177
[ 15.469613] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 15.498519] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[ 15.498521] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 15.498553] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 15.498564] e1000e 0000:00:19.0: setting latency timer to 64
[ 15.498704] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 15.504929] wmi: Mapper loaded
[ 15.520894] iTCO_vendor_support: vendor-support=0
[ 15.543541] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 15.579114] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[ 15.579433] ACPI: Lid Switch [LID]
[ 15.579495] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 15.579499] ACPI: Power Button [PBTN]
[ 15.579557] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
[ 15.579560] ACPI: Sleep Button [SBTN]
[ 15.579617] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 15.579620] ACPI: Power Button [PWRF]
[ 15.643123] Disabling lock debugging due to kernel taint
[ 15.707133] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 15.707236] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 15.707306] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 15.799015] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) d4:be:d9:12:a3:70
[ 15.799019] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 15.799068] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 4041FF-0FF
[ 15.799125] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 15.799134] mei 0000:00:16.0: setting latency timer to 64
[ 15.799203] mei 0000:00:16.0: irq 44 for MSI/MSI-X
[ 15.812872] watchdog: INTCAMT: cannot register miscdev on minor=130 (err=-16).
[ 15.813000] watchdog: error registering /dev/watchdog (err=-16).
[ 15.813086] mei: unable to register watchdog device.
[ 15.851527] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 15.874775] nvidia: module license 'NVIDIA' taints kernel.
[ 15.928355] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 15.928363] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 15.928371] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 15.928378] nvidia 0000:01:00.0: setting latency timer to 64
[ 15.928382] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 15.928579] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 290.10 Wed Nov 16 17:39:29 PST 2011
[ 15.952161] alps.c: Enabled hardware quirk, falling back to psmouse-core
[ 15.965757] input: ImPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8
[ 16.460764] thermal LNXTHERM:00: registered as thermal_zone0
[ 16.460767] ACPI: Thermal Zone [THM] (25 C)
[ 16.993137] ACPI: Battery Slot [BAT0] (battery present)
[ 17.516214] ACPI: Battery Slot [BAT1] (battery absent)
[ 17.628974] acpi device:16: registered as cooling_device8
[ 17.885641] ACPI: Battery Slot [BAT2] (battery absent)
[ 17.905918] ACPI: AC Adapter [AC] (off-line)
[ 17.906649] parport_pc 00:08: [io 0x0378-0x037b]
[ 17.906712] parport_pc 00:08: [irq 5]
[ 17.908312] input: Dell WMI hotkeys as /devices/virtual/input/input9
[ 17.911829] sdhci: Secure Digital Host Controller Interface driver
[ 17.911831] sdhci: Copyright(c) Pierre Ossman
[ 17.914318] sdhci-pci 0000:0b:00.1: SDHCI controller found [1217:8321] (rev 5)
[ 17.914335] sdhci-pci 0000:0b:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 17.914367] sdhci-pci 0000:0b:00.1: Invalid iomem size. You may experience problems.
[ 17.914511] sdhci-pci 0000:0b:00.1: setting latency timer to 64
[ 17.914529] _regulator_get: 0000:0b:00.1 supply vmmc not found, using dummy regulator
[ 17.914568] Registered led device: mmc0::
[ 17.915610] mmc0: SDHCI controller on PCI [0000:0b:00.1] using DMA
[ 17.955391] firewire_ohci 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 17.955400] firewire_ohci 0000:0b:00.0: setting latency timer to 64
[ 17.955433] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 17.955505] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 17.955527] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 17.955748] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:13/LNXVIDEO:00/input/input10
[ 17.955806] ACPI: Video Device [VID] (multi-head: yes rom: yes post: no)
[ 17.967345] cfg80211: Calling CRDA to update world regulatory domain
[ 17.972266] ppdev: user-space parallel port driver
[ 18.008312] firewire_ohci: Added fw-ohci device 0000:0b:00.0, OHCI v1.10, 8 IR + 8 IT contexts, quirks 0x10
[ 18.020285] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 18.020288] Copyright(c) 2003-2011 Intel Corporation
[ 18.021643] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 18.021654] iwlwifi 0000:03:00.0: setting latency timer to 64
[ 18.021753] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
[ 18.021755] iwlwifi 0000:03:00.0: pci_resource_base = ffffc900057f4000
[ 18.021757] iwlwifi 0000:03:00.0: HW Revision ID = 0x34
[ 18.021914] iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X
[ 18.021951] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[ 18.022002] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 18.027654] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 18.036450] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 18.036579] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 18.036701] input: HDA Intel PCH Line-out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 18.036773] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 18.037021] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 18.037023] hda_intel: Disabling MSI
[ 18.037097] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 18.039318] iwlwifi 0000:03:00.0: device EEPROM VER=0x715, CALIB=0x6
[ 18.039321] iwlwifi 0000:03:00.0: Device SKU: 0X1f0
[ 18.039322] iwlwifi 0000:03:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3
[ 18.039336] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 18.061668] iwlwifi 0000:03:00.0: loaded firmware version 17.168.5.3 build 42301
[ 18.061790] Registered led device: phy0-led
[ 18.080373] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 18.394490] parport_pc 00:08: activated
[ 18.394496] parport_pc 00:08: reported by Plug and Play ACPI
[ 18.394576] parport_pc 00:08: disabled
[ 18.404379] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 18.431005] HDMI status: Codec=0 Pin=6 Presence_Detect=0 ELD_Valid=0
[ 18.457641] HDMI status: Codec=0 Pin=7 Presence_Detect=0 ELD_Valid=0
[ 18.471036] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 18.471194] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 18.471371] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[ 18.507770] firewire_core: created device fw0: GUID 00cc9ae1394fc000, S400
[ 31.817983] EXT4-fs (sda6): re-mounted. Opts: (null)
[ 31.964978] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 35.242765] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 35.295945] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 35.328281] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 35.335000] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 35.622269] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 35.629014] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 43.022366] wlan0: authenticate with 5c:33:8e:1b:88:9d (try 1)
[ 43.024202] wlan0: authenticated
[ 43.024437] wlan0: associate with 5c:33:8e:1b:88:9d (try 1)
[ 43.027595] wlan0: RX AssocResp from 5c:33:8e:1b:88:9d (capab=0x431 status=0 aid=1)
[ 43.027598] wlan0: associated
[ 47.106109] EXT4-fs (sda6): re-mounted. Opts: commit=600
[ 47.108016] EXT4-fs (sda7): re-mounted. Opts: commit=600
[ 57.310942] fuse init (API version 7.17)
[ 59.255839] NET: Registered protocol family 10
[ 59.256408] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 69.910943] wlan0: no IPv6 routers present
Last edited by tmske (2012-01-21 21:41:04)Hi,
I've the same notebook. I've not had any hardlocks so far, but I've not seen so much flash movies yet. Anyway, I just tried closing running youtube-video tab on Kde4 + enabled desktop effects -> Everything's fine.
Anyway, perhaps we can collect some issues and solutions in this thread. Here are problems, that I encounter:
- restart does not work
- errors during boot:
[ 2.399277] pnp 00:0b: [irq 23]
[ 2.399308] pnp 00:0b: Plug and Play ACPI device, IDs SMO8800 (active)
[ 2.932179] pnp 00:0c: can't evaluate _CRS: 12311
[ 14.616662] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 14.616771] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 14.616792] iTCO_wdt: cannot register miscdev on minor=130 (err=-16)
[ 14.616904] iTCO_wdt: probe of iTCO_wdt failed with error -16
[ 9.262898] sdhci-pci 0000:0b:00.1: SDHCI controller found [1217:8321] (rev 5)
[ 9.262920] sdhci-pci 0000:0b:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 9.262966] sdhci-pci 0000:0b:00.1: Invalid iomem size. You may experience problems.
[ 9.263176] sdhci-pci 0000:0b:00.1: setting latency timer to 64
Issued solved:
- in order to make nvidia graphics working you have to disable Optimius in BIOS.
- Battery not recognized -- fixed after recend updates
- grub2 does not work. As soon as grub2 loads, the laptop reboots. -> stick to grub1 -- works now (either I did sth wrong the first time or a new version of grub2 fixes this issue)
- in order to make the touchpad work properly install psmouse-elantech from AUR
update: this is only a half-solution. vertical scrolling on the right edge works but graphical tools which rely on x11-input-synpatics still don't work. However, everything works fine with kernel 3.3. Once this in the main arch repos you won't need psmouse-elantech anymore.
Last edited by knue (2012-03-06 23:26:26) -
How to use Remote Debugging in JDeveloper 3.1 ?
I am trying to use the Remote Debugging option with EJBs in JDeveloper 3.1 with Oracle8i 8.1.6.
I checking all steps the online walkthrough for Remote Debugging EJB in 8i and it didn't work.
I'm using Oracle8i EJB/CORBA debug option in project properties, but it does not stop in my EJB's break points.
I tried deploying the EJB again ( with break points) and again it didn't work.
The error message I got in the trace file is:
Errors in file D:\Oracle\admin\SCT\udump\sctS000.TRC:
ORA-29516: Aurora assertion failure: Java thread deadlock detected
Could someone please tell me how to use it?
nullWhich platform is the database running on ??
Other things you should check -
when debugging the EJB, JDev
3.1 looks through your IIOP connections to find the one to use.
Make sure that the IIOP connection that JDev is using for the debugging matches the IIOP connection that the EJB client application is using.
raghu
null -
Error 3211 Database Engine Could Not Lock Table...
...because it is already in use by another person or process"
I have a procedure that creates a temporary table in Access and fills it from a SQL Server query via an ADO recordset. The temp table is then used as the recordsource for a bunch of reports.
The Create and Fill work fine. The problem occurs when I attempt to DROP the table before it's created (I do this rather than delete the rows because I keep changing the table schema and this way I only have to make the change in SQL; also I think it cuts down
on bloat).
Here's my code section:
On Error Resume Next
sqlStr = "DROP TABLE " + LocalTblName
dbCurrent.Execute (sqlStr)
If Err.Number > 0 Then 'should fall through here if the table doesn't exist, or if it's locked
Debug.Print "utl_ADO.CreateTableFromADORecordset: Couldn't drop table " + LocalTblName + ", so clear it and refill it"
utlClearTableRows LocalTblName, "All"
GoTo FillerUp
End If
I close the report that's bound to the temp table, then re-run the program to bring up another set of data. When it hits the DROP TABLE I get different behavior on 2 different PCs - one is my development PC at home, the other is a PC at work. Both run Access2010.
1. At home: Access throws Error 3211 every time. However, the RESUME NEXT allows the error to fall through, whereupon I just do a DELETE from the temp table and then refill it, so it effectively works as long as I don't alter the table schema. The question
is why is the table still "locked" after the report is closed?
2. At work: Access hits the dbCurrent.Execute (sqlStr) and doesn't RESUME NEXT. Instead, it throws up the Error 3211 dialog box and stops. However, if I close the error dialog and re-execute the code, it DROPs the table without throwing an error. The weird
thing is that it alternates between failing and succeeding every other time it executes! So, my question is twofold: a) why doesn't the execution RESUME after the error like it does on my home PC?, and b) why does it succeed only after first failing each time?
Darrell H BurnsHi Darrell H Burns,
Thank you for posting in the MSDN Forum.
I'm trying to involve some senior engineers into this issue and it will take some time. Your patience will be greatly appreciated.
Sorry for any inconvenience and have a nice day!
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Explicit locking of Entity JavaBean
Hi!
I am developing local WD application based on EJB model using SAP NetWeaver Developer Studio 7.0.12
There's Employee entity javabean, that is shown as a table on EmployeeView webdynpro view (model node, bound to controller).
There's also EmployeeEdit webdynpro view, where Employee entity javabean is shown as set of InputFields (same model node, bound to controller).
When user clicks Save button in EmployeeEdit view, changed values are saved.
The problem arises when two users want to change the same record of Employee entity. Both can go to EmployeeEdit view, change values of record and click Save button, because actual transaction for saving is implemented only when users click Save button.
The workaround for this would be explicit locking of entity record when first user goes to EmployeeEdit view, if it's not already locked. But I couldn't find enough information about this.
[EJBLocking interface|http://help.sap.com/javadocs/nw04/current/en/com/sap/engine/interfaces/ejb/locking/EJBLocking.html] might be what I need, but I don't know how to use it.
Can anyone give me an idea about all this?
Thanks in advance
RenatHi, Ganga!
Thank You for reply,
I've already chosen "Local" locking for my entity bean and trying to realize explicit locking for my entity.
I can't understand, what parameters do I need to pass to lock method.
Here is code of entity home method, which is called to lock this entity.
public void ejbHomeLockMe() {
EJBLocking ejbl = null;
Context ctx = null;
try {
ctx = new InitialContext();
ejbl = (EJBLocking) ctx.lookup("java:comp/EJBLocking");
} catch (NamingException ne) {
ne.printStackTrace();
throw new OklaException(ne.getMessage());
try {
DataSource ds = (DataSource) ctx.lookup("jdbc/OKLA_DS");
ejbl.lock( //here I get NullPointerException
TableLocking.LIFETIME_TRANSACTION,
ds.getConnection(),
(EntityBean) this,
TableLocking.MODE_EXCLUSIVE_NONCUMULATIVE);
} catch (SQLException sqle) {
sqle.printStackTrace();
throw new OklaException(sqle.getMessage());
} catch (NamingException ne) {
ne.printStackTrace();
throw new OklaException(ne.getMessage());
As a result I get this exception
java.lang.NullPointerException
at com.sap.engine.services.ejb.entity.pm.lock.EJBLockingImpl.getPKMap(EJBLockingImpl.java:108)
at com.sap.engine.services.ejb.entity.pm.lock.EJBLockingImpl.lock(EJBLockingImpl.java:48)
at my.company.okla.employee.EmployeeBean.ejbHomeLockMe(EmployeeBean.java:92)
Any thoughts about this?
Many thanks
Renat -
Problem Building a Deployable EJB Jar
I have a situation where I have compiled and jarred an EJB's Implementation and interfaces, along with some supporting code -- prior to running ejbc.
I would like to distribute this jar along with a build.xml so that a developer can provide some simple implementation classes (not EJB implementations) along with the ejb-jar.xml and weblogic-ejb-jar.xml and create a deployable EJB jar. I would prefer not to package this as an ear so that the jar could then be neatly added to an ear or deployed separately, at the developers discretion.
I have everything set up but am struggling to get this to work with some sample code.
I am using Weblogic 8.1sp4, and can be sure that the developers will be using this level or higher. In my build.xml, I compile the sample code and package the deployable jar together ok. I then run the wlappc task on the jar.
It took me several iterations to get wlappc to work, and I had to use the following layout for the deployable jar:
/META-INF/myejbimplclasses.jar
/META-INF/log4j.jar
/META-INF/ejb-jar.xml
/META-INF/weblogic-ejb-jar.xml
/META-INF/Manifest.mf
/com... sample compiled class files
And the Manifest.mf contents look like:
Manifest-Version: 1.0
Class-Path: myejbimplclasses.jar;log4j.jar
Created-By: 1.4.1_05-b01 (Sun Microsystems Inc.)
Ant-Version: Apache Ant 1.5.3
I thought it was strange that I needed to put the .jars under META-INF, but this was the only way that I could get the wlappc task to work. I also had to put a semicolon in between the two jars in the Class-Path line (I don't know why).
Once I put it together this way, wlappc works. However, when I try to deploy the resulting jar, it does not work. It reports an error as follows:
weblogic.ejb20.deployer.DeploymentDescriptorException: Unable to load a class specified in your ejb-
jar.xml: com.dcbls.svc.ComponentManagerEJB
Note that this .class file is available within myejbimplclasses.jar, along with all the other classes it relies on (except the log4j stuff.)
Is there a simple problem that I can fix with this setup, or do I need to completely revamp my approach? If so, does anyone have a suggested
approach?
Thanks,
ken clarkOK -- I will concede that this cannot be done, at least not elegantly.
I have started down the path of reorganizing this EJB such that it can be easily built and included in an Ear. However, I am now running into some ant build problems, primarily -- I think -- with wlappc.
I set up the build.xml so that it first compiles the developer's local code, using a classpathref that refers to the EJB code I have previously developed and packaged in a jar, as in:
<path id="compile.classpath">
<pathelement location="../dcblsfw.jar"/>
</path>
<target name="compile_ejb" depends="init">
<javac srcdir="${source}/src" destdir="${build}" debug="true" classpathref="compile.classpath"/>
</target>
Then I jar the output up with the META-INF stuff in the appropriate places. I also want to put the Manifest.mf together to refer to my jar as at the root (where I can have the Ear locate the jar file.)
However, when I set up this manifest, and then run wlappc, also with the same classpathref, as in:
<target name="appc" depends="jar.ejb">
<wlappc debug="${debug}"
source="${dist}/${jar.name}"
classpathref="compile.classpath"/>
</target>
The appc throws all sorts of exceptions. It seems that the skeleton code it builds does not really match up well with the actual EJB code, and the compiler then complains when trying to compile the skeleton code. For example:
[wlappc] C:\DOCUME~1\clarkk03\LOCALS~1\Temp\appcgen\com\pfizer\dcbls\svc\SampleEJBComponentManager_nrpnna_Impl.java:67: ejbActivate() in com.pfizer.dcbls.svc
.SampleEJBComponentManager_nrpnna_Impl cannot override ejbActivate() in com.pfizer.dcbls.svc.ComponentManagerEJB; overridden method does not throw java.rmi.RemoteException
[wlappc] public void ejbActivate()
Now, when I remove the Class-Path entry in the Manifest.mf, wlappc works fine.
For reference, the jar building task (with manifest entry included,) is:
<target name="jar.ejb" depends="compile_ejb">
<jar jarfile="${dist}/${jar.name}"
basedir="${build}"
update="yes">
<manifest>
<attribute name="Class-Path" value="dcblsfw.jar"/>
</manifest>
</jar>
</target>
Is this a bug with appc/wlappc? Is there a better way to do this, or a workaround to make it work?
It seems odd that if the Class-Path in Manifest.mf is not to refer to anything internal to the jar, that it affects appc the way it does.
Thanks,
ken -
Catalyst 10.10 - Xorg 1.9.2 crash and random system freezes
Hello.
I have Radeon HD4650 AGP graphics card.
I have up to date(no testing repos) Archlinux.
I installed catalyst 10.10 from AUR - http://aur.archlinux.org/packages.php?ID=29111.
Everything is ok, but two problems:
1) When I switching TTY(eg. Ctrl-Alt-F6) while loading KDE(OpenGL splash is running) Xorg crashes:
kdm.log:
X.Org X Server 1.9.2
Release Date: 2010-10-30
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.35-ARCH i686
Current Operating System: Linux myhost 2.6.35-ARCH #1 SMP PREEMPT Sat Oct 30 19:57:05 UTC 2010 i686
Kernel command line: root=/dev/disk/by-uuid/223249f9-5c17-4b09-9886-55ac67009986 ro elevator=deadline nomodeset vga=33556
Build Date: 01 November 2010 10:23:07PM
Current version of pixman: 0.18.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 8 10:37:11 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
Backtrace:
0: /usr/bin/X (xorg_backtrace+0x3b) [0x80e5ebb]
1: /usr/bin/X (0x8048000+0x5cd65) [0x80a4d65]
2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb785240c]
3: /usr/bin/X (0x8048000+0x143986) [0x818b986]
4: /usr/bin/X (0x8048000+0x545c9) [0x809c5c9]
5: /usr/bin/X (0x8048000+0x16de3b) [0x81b5e3b]
6: /usr/bin/X (FreeCursor+0x57) [0x8062bd7]
7: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0xb6979000+0x7b0b91) [0xb7129b91]
8: /usr/bin/X (0x8048000+0x14349a) [0x818b49a]
9: /usr/bin/X (miPointerUpdateSprite+0x2bd) [0x809d47d]
10: /usr/bin/X (0x8048000+0x556d3) [0x809d6d3]
11: /usr/bin/X (0x8048000+0xa34f6) [0x80eb4f6]
12: /usr/bin/X (0x8048000+0x16dcad) [0x81b5cad]
13: /usr/bin/X (0x8048000+0x2f31d) [0x807731d]
14: /usr/bin/X (ProcChangeActivePointerGrab+0x141) [0x807b901]
15: /usr/bin/X (0x8048000+0x27187) [0x806f187]
16: /usr/bin/X (0x8048000+0x1a1b5) [0x80621b5]
17: /lib/libc.so.6 (__libc_start_main+0xe6) [0xb7582c76]
18: /usr/bin/X (0x8048000+0x19d91) [0x8061d91]
Segmentation fault at address 0x21f000e6
Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting
kernel.log
Nov 8 10:37:07 localhost kernel: Initializing cgroup subsys cpuset
Nov 8 10:37:07 localhost kernel: Initializing cgroup subsys cpu
Nov 8 10:37:07 localhost kernel: Linux version 2.6.35-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Sat Oct 30 19:57:05 UTC 2010
Nov 8 10:37:07 localhost kernel: BIOS-provided physical RAM map:
Nov 8 10:37:07 localhost kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Nov 8 10:37:07 localhost kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Nov 8 10:37:07 localhost kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Nov 8 10:37:07 localhost kernel: BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)
Nov 8 10:37:07 localhost kernel: BIOS-e820: 00000000bfff0000 - 00000000bfff8000 (ACPI data)
Nov 8 10:37:07 localhost kernel: BIOS-e820: 00000000bfff8000 - 00000000c0000000 (ACPI NVS)
Nov 8 10:37:07 localhost kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Nov 8 10:37:07 localhost kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Nov 8 10:37:07 localhost kernel: BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Nov 8 10:37:07 localhost kernel: Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
Nov 8 10:37:07 localhost kernel: DMI 2.3 present.
Nov 8 10:37:07 localhost kernel: AMI BIOS detected: BIOS may corrupt low RAM, working around it.
Nov 8 10:37:07 localhost kernel: e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
Nov 8 10:37:07 localhost kernel: e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
Nov 8 10:37:07 localhost kernel: e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
Nov 8 10:37:07 localhost kernel: last_pfn = 0xbfff0 max_arch_pfn = 0x100000
Nov 8 10:37:07 localhost kernel: MTRR default type: uncachable
Nov 8 10:37:07 localhost kernel: MTRR fixed ranges enabled:
Nov 8 10:37:07 localhost kernel: 00000-9FFFF write-back
Nov 8 10:37:07 localhost kernel: A0000-EFFFF uncachable
Nov 8 10:37:07 localhost kernel: F0000-FFFFF write-protect
Nov 8 10:37:07 localhost kernel: MTRR variable ranges enabled:
Nov 8 10:37:07 localhost kernel: 0 base 000000000 mask F80000000 write-back
Nov 8 10:37:07 localhost kernel: 1 base 080000000 mask FC0000000 write-back
Nov 8 10:37:07 localhost kernel: 2 disabled
Nov 8 10:37:07 localhost kernel: 3 disabled
Nov 8 10:37:07 localhost kernel: 4 disabled
Nov 8 10:37:07 localhost kernel: 5 base 0E0000000 mask FFC000000 write-combining
Nov 8 10:37:07 localhost kernel: 6 disabled
Nov 8 10:37:07 localhost kernel: 7 disabled
Nov 8 10:37:07 localhost kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Nov 8 10:37:07 localhost kernel: Scanning 0 areas for low memory corruption
Nov 8 10:37:07 localhost kernel: modified physical RAM map:
Nov 8 10:37:07 localhost kernel: modified: 0000000000000000 - 0000000000010000 (reserved)
Nov 8 10:37:07 localhost kernel: modified: 0000000000010000 - 000000000009fc00 (usable)
Nov 8 10:37:07 localhost kernel: modified: 000000000009fc00 - 00000000000a0000 (reserved)
Nov 8 10:37:07 localhost kernel: modified: 00000000000f0000 - 0000000000100000 (reserved)
Nov 8 10:37:07 localhost kernel: modified: 0000000000100000 - 00000000bfff0000 (usable)
Nov 8 10:37:07 localhost kernel: modified: 00000000bfff0000 - 00000000bfff8000 (ACPI data)
Nov 8 10:37:07 localhost kernel: modified: 00000000bfff8000 - 00000000c0000000 (ACPI NVS)
Nov 8 10:37:07 localhost kernel: modified: 00000000fec00000 - 00000000fec01000 (reserved)
Nov 8 10:37:07 localhost kernel: modified: 00000000fee00000 - 00000000fee01000 (reserved)
Nov 8 10:37:07 localhost kernel: modified: 00000000fff80000 - 0000000100000000 (reserved)
Nov 8 10:37:07 localhost kernel: initial memory mapped : 0 - 01800000
Nov 8 10:37:07 localhost kernel: found SMP MP-table at [c00fb930] fb930
Nov 8 10:37:07 localhost kernel: init_memory_mapping: 0000000000000000-00000000377fe000
Nov 8 10:37:07 localhost kernel: 0000000000 - 0000400000 page 4k
Nov 8 10:37:07 localhost kernel: 0000400000 - 0037400000 page 2M
Nov 8 10:37:07 localhost kernel: 0037400000 - 00377fe000 page 4k
Nov 8 10:37:07 localhost kernel: kernel direct mapping tables up to 377fe000 @ 15000-1a000
Nov 8 10:37:07 localhost kernel: RAMDISK: 7fda7000 - 7fff0000
Nov 8 10:37:07 localhost kernel: Allocated new RAMDISK: 00100000 - 003480c5
Nov 8 10:37:07 localhost kernel: Move RAMDISK from 000000007fda7000 - 000000007ffef0c4 to 00100000 - 003480c4
Nov 8 10:37:07 localhost kernel: ACPI: RSDP 000fa980 00014 (v00 AMI )
Nov 8 10:37:07 localhost kernel: ACPI: RSDT bfff0000 0002C (v01 AMIINT VIA_K7 00000010 MSFT 00000097)
Nov 8 10:37:07 localhost kernel: ACPI: FACP bfff0030 00081 (v01 AMIINT VIA_K7 00000011 MSFT 00000097)
Nov 8 10:37:07 localhost kernel: ACPI: DSDT bfff0120 03362 (v01 VIA VIA_K7 00001000 MSFT 0100000D)
Nov 8 10:37:07 localhost kernel: ACPI: FACS bfff8000 00040
Nov 8 10:37:07 localhost kernel: ACPI: APIC bfff00c0 00054 (v01 AMIINT VIA_K7 00000009 MSFT 00000097)
Nov 8 10:37:07 localhost kernel: ACPI: Local APIC address 0xfee00000
Nov 8 10:37:07 localhost kernel: 2183MB HIGHMEM available.
Nov 8 10:37:07 localhost kernel: 887MB LOWMEM available.
Nov 8 10:37:07 localhost kernel: mapped low ram: 0 - 377fe000
Nov 8 10:37:07 localhost kernel: low ram: 0 - 377fe000
Nov 8 10:37:07 localhost kernel: Zone PFN ranges:
Nov 8 10:37:07 localhost kernel: DMA 0x00000010 -> 0x00001000
Nov 8 10:37:07 localhost kernel: Normal 0x00001000 -> 0x000377fe
Nov 8 10:37:07 localhost kernel: HighMem 0x000377fe -> 0x000bfff0
Nov 8 10:37:07 localhost kernel: Movable zone start PFN for each node
Nov 8 10:37:07 localhost kernel: early_node_map[2] active PFN ranges
Nov 8 10:37:07 localhost kernel: 0: 0x00000010 -> 0x0000009f
Nov 8 10:37:07 localhost kernel: 0: 0x00000100 -> 0x000bfff0
Nov 8 10:37:07 localhost kernel: On node 0 totalpages: 786303
Nov 8 10:37:07 localhost kernel: free_area_init_node: node 0, pgdat c1418ac0, node_mem_map c157d200
Nov 8 10:37:07 localhost kernel: DMA zone: 32 pages used for memmap
Nov 8 10:37:07 localhost kernel: DMA zone: 0 pages reserved
Nov 8 10:37:07 localhost kernel: DMA zone: 3951 pages, LIFO batch:0
Nov 8 10:37:07 localhost kernel: Normal zone: 1744 pages used for memmap
Nov 8 10:37:07 localhost kernel: Normal zone: 221486 pages, LIFO batch:31
Nov 8 10:37:07 localhost kernel: HighMem zone: 4368 pages used for memmap
Nov 8 10:37:07 localhost kernel: HighMem zone: 554722 pages, LIFO batch:31
Nov 8 10:37:07 localhost kernel: Using APIC driver default
Nov 8 10:37:07 localhost kernel: ACPI: PM-Timer IO Port: 0x808
Nov 8 10:37:07 localhost kernel: ACPI: Local APIC address 0xfee00000
Nov 8 10:37:07 localhost kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Nov 8 10:37:07 localhost kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Nov 8 10:37:07 localhost kernel: IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
Nov 8 10:37:07 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Nov 8 10:37:07 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Nov 8 10:37:07 localhost kernel: ACPI: IRQ0 used by override.
Nov 8 10:37:07 localhost kernel: ACPI: IRQ2 used by override.
Nov 8 10:37:07 localhost kernel: ACPI: IRQ9 used by override.
Nov 8 10:37:07 localhost kernel: Using ACPI (MADT) for SMP configuration information
Nov 8 10:37:07 localhost kernel: SMP: Allowing 1 CPUs, 0 hotplug CPUs
Nov 8 10:37:07 localhost kernel: nr_irqs_gsi: 40
Nov 8 10:37:07 localhost kernel: early_res array is doubled to 64 at [16000 - 167ff]
Nov 8 10:37:07 localhost kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Nov 8 10:37:07 localhost kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
Nov 8 10:37:07 localhost kernel: PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Nov 8 10:37:07 localhost kernel: Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000)
Nov 8 10:37:07 localhost kernel: Booting paravirtualized kernel on bare hardware
Nov 8 10:37:07 localhost kernel: setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
Nov 8 10:37:07 localhost kernel: PERCPU: Embedded 14 pages/cpu @c3000000 s34880 r0 d22464 u4194304
Nov 8 10:37:07 localhost kernel: pcpu-alloc: s34880 r0 d22464 u4194304 alloc=1*4194304
Nov 8 10:37:07 localhost kernel: pcpu-alloc: [0] 0
Nov 8 10:37:07 localhost kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780159
Nov 8 10:37:07 localhost kernel: Kernel command line: root=/dev/disk/by-uuid/223249f9-5c17-4b09-9886-55ac67009986 ro elevator=deadline nomodeset vga=33556
Nov 8 10:37:07 localhost kernel: PID hash table entries: 4096 (order: 2, 16384 bytes)
Nov 8 10:37:07 localhost kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Nov 8 10:37:07 localhost kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Nov 8 10:37:07 localhost kernel: Enabling fast FPU save and restore... done.
Nov 8 10:37:07 localhost kernel: Enabling unmasked SIMD FPU exception support... done.
Nov 8 10:37:07 localhost kernel: Initializing CPU#0
Nov 8 10:37:07 localhost kernel: allocated 15728000 bytes of page_cgroup
Nov 8 10:37:07 localhost kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Nov 8 10:37:07 localhost kernel: Subtract (46 early reservations)
Nov 8 10:37:07 localhost kernel: #1 [0000001000 - 0000002000] EX TRAMPOLINE
Nov 8 10:37:07 localhost kernel: #2 [0001000000 - 0001574184] TEXT DATA BSS
Nov 8 10:37:07 localhost kernel: #3 [0001575000 - 000157b108] BRK
Nov 8 10:37:07 localhost kernel: #4 [00000fb940 - 0000100000] BIOS reserved
Nov 8 10:37:07 localhost kernel: #5 [00000fb930 - 00000fb940] MP-table mpf
Nov 8 10:37:07 localhost kernel: #6 [000009fc00 - 00000f6630] BIOS reserved
Nov 8 10:37:07 localhost kernel: #7 [00000f6738 - 00000fb930] BIOS reserved
Nov 8 10:37:07 localhost kernel: #8 [00000f6630 - 00000f6738] MP-table mpc
Nov 8 10:37:07 localhost kernel: #9 [0000010000 - 0000011000] TRAMPOLINE
Nov 8 10:37:07 localhost kernel: #10 [0000011000 - 0000015000] ACPI WAKEUP
Nov 8 10:37:07 localhost kernel: #11 [0000015000 - 0000016000] PGTABLE
Nov 8 10:37:07 localhost kernel: #12 [0000100000 - 0000349000] NEW RAMDISK
Nov 8 10:37:07 localhost kernel: #13 [000157c000 - 000157d000] BOOTMEM
Nov 8 10:37:07 localhost kernel: #14 [000157d000 - 0002d7d000] BOOTMEM
Nov 8 10:37:07 localhost kernel: #15 [00015741c0 - 00015741c4] BOOTMEM
Nov 8 10:37:07 localhost kernel: #16 [0001574200 - 00015742c0] BOOTMEM
Nov 8 10:37:07 localhost kernel: #17 [00015742c0 - 0001574314] BOOTMEM
Nov 8 10:37:07 localhost kernel: #18 [0002d7d000 - 0002d80000] BOOTMEM
Nov 8 10:37:07 localhost kernel: #19 [0001574340 - 0001574410] BOOTMEM
Nov 8 10:37:07 localhost kernel: #20 [0002d80000 - 0002d8c000] BOOTMEM
Nov 8 10:37:07 localhost kernel: #21 [0001574440 - 0001574467] BOOTMEM
Nov 8 10:37:07 localhost kernel: #22 [0001574480 - 0001574598] BOOTMEM
Nov 8 10:37:07 localhost kernel: #23 [00015745c0 - 0001574600] BOOTMEM
Nov 8 10:37:07 localhost kernel: #24 [0001574600 - 0001574640] BOOTMEM
Nov 8 10:37:07 localhost kernel: #25 [0001574640 - 0001574680] BOOTMEM
Nov 8 10:37:07 localhost kernel: #26 [0001574680 - 00015746c0] BOOTMEM
Nov 8 10:37:07 localhost kernel: #27 [00015746c0 - 0001574700] BOOTMEM
Nov 8 10:37:07 localhost kernel: #28 [0001574700 - 0001574740] BOOTMEM
Nov 8 10:37:07 localhost kernel: #29 [0001574740 - 0001574780] BOOTMEM
Nov 8 10:37:07 localhost kernel: #30 [0001574780 - 00015747c0] BOOTMEM
Nov 8 10:37:07 localhost kernel: #31 [00015747c0 - 0001574800] BOOTMEM
Nov 8 10:37:07 localhost kernel: #32 [0001574800 - 0001574810] BOOTMEM
Nov 8 10:37:07 localhost kernel: #33 [0001574840 - 00015748a5] BOOTMEM
Nov 8 10:37:07 localhost kernel: #34 [00015748c0 - 0001574925] BOOTMEM
Nov 8 10:37:07 localhost kernel: #35 [0003000000 - 000300e000] BOOTMEM
Nov 8 10:37:07 localhost kernel: #36 [0001574940 - 0001574944] BOOTMEM
Nov 8 10:37:07 localhost kernel: #37 [0001574980 - 0001574984] BOOTMEM
Nov 8 10:37:07 localhost kernel: #38 [00015749c0 - 00015749c4] BOOTMEM
Nov 8 10:37:07 localhost kernel: #39 [0001574a00 - 0001574a04] BOOTMEM
Nov 8 10:37:07 localhost kernel: #40 [0001574a40 - 0001574af0] BOOTMEM
Nov 8 10:37:07 localhost kernel: #41 [0001574b00 - 0001574ba8] BOOTMEM
Nov 8 10:37:07 localhost kernel: #42 [0002d8c000 - 0002d90000] BOOTMEM
Nov 8 10:37:07 localhost kernel: #43 [0002d90000 - 0002e10000] BOOTMEM
Nov 8 10:37:07 localhost kernel: #44 [0002e10000 - 0002e50000] BOOTMEM
Nov 8 10:37:07 localhost kernel: #45 [000300e000 - 0003f0dd80] BOOTMEM
Nov 8 10:37:07 localhost kernel: Initializing HighMem for node 0 (000377fe:000bfff0)
Nov 8 10:37:07 localhost kernel: Memory: 3096392k/3145664k available (2987k kernel code, 48820k reserved, 1237k data, 416k init, 2236360k highmem)
Nov 8 10:37:07 localhost kernel: virtual kernel memory layout:
Nov 8 10:37:07 localhost kernel: fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
Nov 8 10:37:07 localhost kernel: pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Nov 8 10:37:07 localhost kernel: vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
Nov 8 10:37:07 localhost kernel: lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
Nov 8 10:37:07 localhost kernel: .init : 0xc1421000 - 0xc1489000 ( 416 kB)
Nov 8 10:37:07 localhost kernel: .data : 0xc12eac4c - 0xc1420200 (1237 kB)
Nov 8 10:37:07 localhost kernel: .text : 0xc1000000 - 0xc12eac4c (2987 kB)
Nov 8 10:37:07 localhost kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
Nov 8 10:37:07 localhost kernel: SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Nov 8 10:37:07 localhost kernel: Hierarchical RCU implementation.
Nov 8 10:37:07 localhost kernel: RCU-based detection of stalled CPUs is disabled.
Nov 8 10:37:07 localhost kernel: Verbose stalled-CPUs detection is disabled.
Nov 8 10:37:07 localhost kernel: NR_IRQS:512
Nov 8 10:37:07 localhost kernel: Console: colour VGA+ 132x43
Nov 8 10:37:07 localhost kernel: console [tty0] enabled
Nov 8 10:37:07 localhost kernel: Fast TSC calibration using PIT
Nov 8 10:37:07 localhost kernel: Detected 1666.888 MHz processor.
Nov 8 10:37:07 localhost kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 3335.68 BogoMIPS (lpj=5556293)
Nov 8 10:37:07 localhost kernel: pid_max: default: 32768 minimum: 301
Nov 8 10:37:07 localhost kernel: Security Framework initialized
Nov 8 10:37:07 localhost kernel: Mount-cache hash table entries: 512
Nov 8 10:37:07 localhost kernel: Initializing cgroup subsys ns
Nov 8 10:37:07 localhost kernel: Initializing cgroup subsys cpuacct
Nov 8 10:37:07 localhost kernel: Initializing cgroup subsys memory
Nov 8 10:37:07 localhost kernel: Initializing cgroup subsys devices
Nov 8 10:37:07 localhost kernel: Initializing cgroup subsys freezer
Nov 8 10:37:07 localhost kernel: Initializing cgroup subsys net_cls
Nov 8 10:37:07 localhost kernel: Initializing cgroup subsys blkio
Nov 8 10:37:07 localhost kernel: mce: CPU supports 4 MCE banks
Nov 8 10:37:07 localhost kernel: Performance Events: AMD PMU driver.
Nov 8 10:37:07 localhost kernel: ... version: 0
Nov 8 10:37:07 localhost kernel: ... bit width: 48
Nov 8 10:37:07 localhost kernel: ... generic registers: 4
Nov 8 10:37:07 localhost kernel: ... value mask: 0000ffffffffffff
Nov 8 10:37:07 localhost kernel: ... max period: 00007fffffffffff
Nov 8 10:37:07 localhost kernel: ... fixed-purpose events: 0
Nov 8 10:37:07 localhost kernel: ... event mask: 000000000000000f
Nov 8 10:37:07 localhost kernel: SMP alternatives: switching to UP code
Nov 8 10:37:07 localhost kernel: Freeing SMP alternatives: 12k freed
Nov 8 10:37:07 localhost kernel: ACPI: Core revision 20100428
Nov 8 10:37:07 localhost kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Nov 8 10:37:07 localhost kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Nov 8 10:37:07 localhost kernel: CPU0: AMD Athlon(tm) XP 2000+ stepping 00
Nov 8 10:37:07 localhost kernel: Brought up 1 CPUs
Nov 8 10:37:07 localhost kernel: Total of 1 processors activated (3335.68 BogoMIPS).
Nov 8 10:37:07 localhost kernel: devtmpfs: initialized
Nov 8 10:37:07 localhost kernel: NET: Registered protocol family 16
Nov 8 10:37:07 localhost kernel: ACPI: bus type pci registered
Nov 8 10:37:07 localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
Nov 8 10:37:07 localhost kernel: PCI: Using configuration type 1 for base access
Nov 8 10:37:07 localhost kernel: bio: create slab <bio-0> at 0
Nov 8 10:37:07 localhost kernel: ACPI: EC: Look up EC in DSDT
Nov 8 10:37:07 localhost kernel: ACPI: Interpreter enabled
Nov 8 10:37:07 localhost kernel: ACPI: (supports S0 S3 S4 S5)
Nov 8 10:37:07 localhost kernel: ACPI: Using IOAPIC for interrupt routing
Nov 8 10:37:07 localhost kernel: ACPI: Power Resource [URP1] (off)
Nov 8 10:37:07 localhost kernel: ACPI: Power Resource [URP2] (off)
Nov 8 10:37:07 localhost kernel: ACPI: Power Resource [FDDP] (off)
Nov 8 10:37:07 localhost kernel: ACPI: Power Resource [LPTP] (off)
Nov 8 10:37:07 localhost kernel: ACPI: No dock devices found.
Nov 8 10:37:07 localhost kernel: PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
Nov 8 10:37:07 localhost kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Nov 8 10:37:07 localhost kernel: pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
Nov 8 10:37:07 localhost kernel: pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
Nov 8 10:37:07 localhost kernel: pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
Nov 8 10:37:07 localhost kernel: pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
Nov 8 10:37:07 localhost kernel: pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xffdfffff] (ignored)
Nov 8 10:37:07 localhost kernel: pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffdfffff] (ignored)
Nov 8 10:37:07 localhost kernel: pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xe3ffffff pref]
Nov 8 10:37:07 localhost kernel: pci 0000:00:01.0: supports D1
Nov 8 10:37:07 localhost kernel: pci 0000:00:0b.0: reg 10: [mem 0xdc000000-0xdfffffff]
Nov 8 10:37:07 localhost kernel: pci 0000:00:0b.0: reg 30: [mem 0xdbff0000-0xdbffffff pref]
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.0: reg 20: [io 0xe400-0xe41f]
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.0: supports D1 D2
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.0: PME# disabled
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.1: reg 20: [io 0xe800-0xe81f]
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.1: supports D1 D2
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.1: PME# disabled
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.2: reg 20: [io 0xec00-0xec1f]
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.2: supports D1 D2
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.2: PME# disabled
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.3: reg 10: [mem 0xdbfeff00-0xdbfeffff]
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.3: supports D1 D2
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.3: PME# disabled
Nov 8 10:37:07 localhost kernel: HPET not enabled in BIOS. You might try hpet=force boot option
Nov 8 10:37:07 localhost kernel: pci 0000:00:11.0: quirk: [io 0x0800-0x087f] claimed by vt8235 PM
Nov 8 10:37:07 localhost kernel: pci 0000:00:11.0: quirk: [io 0x0400-0x040f] claimed by vt8235 SMB
Nov 8 10:37:07 localhost kernel: pci 0000:00:11.1: reg 20: [io 0xfc00-0xfc0f]
Nov 8 10:37:07 localhost kernel: pci 0000:00:11.5: reg 10: [io 0xe000-0xe0ff]
Nov 8 10:37:07 localhost kernel: pci 0000:00:11.5: supports D1 D2
Nov 8 10:37:07 localhost kernel: pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
Nov 8 10:37:07 localhost kernel: pci 0000:01:00.0: reg 14: [io 0xc800-0xc8ff]
Nov 8 10:37:07 localhost kernel: pci 0000:01:00.0: reg 18: [mem 0xd7ef0000-0xd7efffff]
Nov 8 10:37:07 localhost kernel: pci 0000:01:00.0: reg 30: [mem 0xd7ec0000-0xd7edffff pref]
Nov 8 10:37:07 localhost kernel: pci 0000:01:00.0: supports D1 D2
Nov 8 10:37:07 localhost kernel: pci 0000:00:01.0: PCI bridge to [bus 01-01]
Nov 8 10:37:07 localhost kernel: pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
Nov 8 10:37:07 localhost kernel: pci 0000:00:01.0: bridge window [mem 0xd7e00000-0xd7efffff]
Nov 8 10:37:07 localhost kernel: pci 0000:00:01.0: bridge window [mem 0xb7d00000-0xd7cfffff pref]
Nov 8 10:37:07 localhost kernel: pci_bus 0000:00: on NUMA node 0
Nov 8 10:37:07 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Nov 8 10:37:07 localhost kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 12 14 15)
Nov 8 10:37:07 localhost kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Nov 8 10:37:07 localhost kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Nov 8 10:37:07 localhost kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Nov 8 10:37:07 localhost kernel: HEST: Table is not found!
Nov 8 10:37:07 localhost kernel: vgaarb: device added: PCI:0000:00:0b.0,decodes=io+mem,owns=io+mem,locks=none
Nov 8 10:37:07 localhost kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
Nov 8 10:37:07 localhost kernel: vgaarb: loaded
Nov 8 10:37:07 localhost kernel: PCI: Using ACPI for IRQ routing
Nov 8 10:37:07 localhost kernel: PCI: pci_cache_line_size set to 32 bytes
Nov 8 10:37:07 localhost kernel: pci 0000:00:01.0: address space collision: [mem 0xb7d00000-0xd7cfffff pref] conflicts with System RAM [mem 0x00100000-0xbffeffff]
Nov 8 10:37:07 localhost kernel: pci 0000:01:00.0: no compatible bridge window for [mem 0xc0000000-0xcfffffff pref]
Nov 8 10:37:07 localhost kernel: reserve RAM buffer: 000000000009fc00 - 000000000009ffff
Nov 8 10:37:07 localhost kernel: reserve RAM buffer: 00000000bfff0000 - 00000000bfffffff
Nov 8 10:37:07 localhost kernel: NetLabel: Initializing
Nov 8 10:37:07 localhost kernel: NetLabel: domain hash size = 128
Nov 8 10:37:07 localhost kernel: NetLabel: protocols = UNLABELED CIPSOv4
Nov 8 10:37:07 localhost kernel: NetLabel: unlabeled traffic allowed by default
Nov 8 10:37:07 localhost kernel: Switching to clocksource tsc
Nov 8 10:37:07 localhost kernel: pnp: PnP ACPI init
Nov 8 10:37:07 localhost kernel: ACPI: bus type pnp registered
Nov 8 10:37:07 localhost kernel: pnp 00:01: disabling [io 0x0820-0x0821] because it overlaps 0000:00:11.0 BAR 13 [io 0x0800-0x087f]
Nov 8 10:37:07 localhost kernel: pnp: PnP ACPI: found 9 devices
Nov 8 10:37:07 localhost kernel: ACPI: ACPI bus type pnp unregistered
Nov 8 10:37:07 localhost kernel: system 00:01: [io 0x0290-0x0297] has been reserved
Nov 8 10:37:07 localhost kernel: system 00:01: [io 0x03f0-0x03f1] has been reserved
Nov 8 10:37:07 localhost kernel: system 00:01: [io 0x04d0-0x04d1] has been reserved
Nov 8 10:37:07 localhost kernel: system 00:01: [io 0x0400-0x040f] has been reserved
Nov 8 10:37:07 localhost kernel: system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
Nov 8 10:37:07 localhost kernel: pci 0000:00:01.0: BAR 15: assigned [mem 0xc0000000-0xcfffffff pref]
Nov 8 10:37:07 localhost kernel: pci 0000:01:00.0: BAR 0: assigned [mem 0xc0000000-0xcfffffff pref]
Nov 8 10:37:07 localhost kernel: pci 0000:01:00.0: BAR 0: set to [mem 0xc0000000-0xcfffffff pref] (PCI address [0xc0000000-0xcfffffff]
Nov 8 10:37:07 localhost kernel: pci 0000:00:01.0: PCI bridge to [bus 01-01]
Nov 8 10:37:07 localhost kernel: pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
Nov 8 10:37:07 localhost kernel: pci 0000:00:01.0: bridge window [mem 0xd7e00000-0xd7efffff]
Nov 8 10:37:07 localhost kernel: pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff pref]
Nov 8 10:37:07 localhost kernel: pci 0000:00:01.0: setting latency timer to 64
Nov 8 10:37:07 localhost kernel: pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
Nov 8 10:37:07 localhost kernel: pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
Nov 8 10:37:07 localhost kernel: pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
Nov 8 10:37:07 localhost kernel: pci_bus 0000:01: resource 1 [mem 0xd7e00000-0xd7efffff]
Nov 8 10:37:07 localhost kernel: pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff pref]
Nov 8 10:37:07 localhost kernel: NET: Registered protocol family 2
Nov 8 10:37:07 localhost kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Nov 8 10:37:07 localhost kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Nov 8 10:37:07 localhost kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Nov 8 10:37:07 localhost kernel: TCP: Hash tables configured (established 131072 bind 65536)
Nov 8 10:37:07 localhost kernel: TCP reno registered
Nov 8 10:37:07 localhost kernel: UDP hash table entries: 512 (order: 2, 16384 bytes)
Nov 8 10:37:07 localhost kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
Nov 8 10:37:07 localhost kernel: NET: Registered protocol family 1
Nov 8 10:37:07 localhost kernel: pci 0000:00:01.0: disabling DAC on VIA PCI bridge
Nov 8 10:37:07 localhost kernel: pci 0000:00:0b.0: Boot video device
Nov 8 10:37:07 localhost kernel: PCI: CLS 32 bytes, default 32
Nov 8 10:37:07 localhost kernel: Unpacking initramfs...
Nov 8 10:37:07 localhost kernel: Freeing initrd memory: 2340k freed
Nov 8 10:37:07 localhost kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Nov 8 10:37:07 localhost kernel: apm: overridden by ACPI.
Nov 8 10:37:07 localhost kernel: Scanning for low memory corruption every 60 seconds
Nov 8 10:37:07 localhost kernel: audit: initializing netlink socket (disabled)
Nov 8 10:37:07 localhost kernel: type=2000 audit(1289212597.233:1): initialized
Nov 8 10:37:07 localhost kernel: highmem bounce pool size: 64 pages
Nov 8 10:37:07 localhost kernel: VFS: Disk quotas dquot_6.5.2
Nov 8 10:37:07 localhost kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Nov 8 10:37:07 localhost kernel: msgmni has been set to 1684
Nov 8 10:37:07 localhost kernel: alg: No test for stdrng (krng)
Nov 8 10:37:07 localhost kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
Nov 8 10:37:07 localhost kernel: io scheduler noop registered
Nov 8 10:37:07 localhost kernel: io scheduler deadline registered (default)
Nov 8 10:37:07 localhost kernel: io scheduler cfq registered
Nov 8 10:37:07 localhost kernel: ERST: Table is not found!
Nov 8 10:37:07 localhost kernel: isapnp: Scanning for PnP cards...
Nov 8 10:37:07 localhost kernel: isapnp: No Plug & Play device found
Nov 8 10:37:07 localhost kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Nov 8 10:37:07 localhost kernel: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Nov 8 10:37:07 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Nov 8 10:37:07 localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Nov 8 10:37:07 localhost kernel: mice: PS/2 mouse device common for all mice
Nov 8 10:37:07 localhost kernel: cpuidle: using governor ladder
Nov 8 10:37:07 localhost kernel: cpuidle: using governor menu
Nov 8 10:37:07 localhost kernel: TCP cubic registered
Nov 8 10:37:07 localhost kernel: NET: Registered protocol family 17
Nov 8 10:37:07 localhost kernel: Using IPI No-Shortcut mode
Nov 8 10:37:07 localhost kernel: PM: Resume from disk failed.
Nov 8 10:37:07 localhost kernel: registered taskstats version 1
Nov 8 10:37:07 localhost kernel: Initalizing network drop monitor service
Nov 8 10:37:07 localhost kernel: Freeing unused kernel memory: 416k freed
Nov 8 10:37:07 localhost kernel: udev[31]: starting version 163
Nov 8 10:37:07 localhost kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Nov 8 10:37:07 localhost kernel: Linux agpgart interface v0.103
Nov 8 10:37:07 localhost kernel: agpgart: Detected VIA KT400/KT400A/KT600 chipset
Nov 8 10:37:07 localhost kernel: agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
Nov 8 10:37:07 localhost kernel: [drm] Initialized drm 1.1.0 20060810
Nov 8 10:37:07 localhost kernel: [drm] VGACON disable radeon kernel modesetting.
Nov 8 10:37:07 localhost kernel: pci 0000:01:00.0: enabling device (0000 -> 0003)
Nov 8 10:37:07 localhost kernel: pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Nov 8 10:37:07 localhost kernel: [drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0
Nov 8 10:37:07 localhost kernel: SCSI subsystem initialized
Nov 8 10:37:07 localhost kernel: Floppy drive(s): fd0 is 1.44M
Nov 8 10:37:07 localhost kernel: FDC 0 is a post-1991 82077
Nov 8 10:37:07 localhost kernel: libata version 3.00 loaded.
Nov 8 10:37:07 localhost kernel: pata_via 0000:00:11.1: version 0.3.4
Nov 8 10:37:07 localhost kernel: pata_via 0000:00:11.1: can't derive routing for PCI INT A
Nov 8 10:37:07 localhost kernel: scsi0 : pata_via
Nov 8 10:37:07 localhost kernel: scsi1 : pata_via
Nov 8 10:37:07 localhost kernel: ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
Nov 8 10:37:07 localhost kernel: ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
Nov 8 10:37:07 localhost kernel: ata1.00: ATA-6: ST380011A, 3.04, max UDMA/100
Nov 8 10:37:07 localhost kernel: ata1.00: 156301488 sectors, multi 16: LBA48
Nov 8 10:37:07 localhost kernel: ata1.00: configured for UDMA/100
Nov 8 10:37:07 localhost kernel: scsi 0:0:0:0: Direct-Access ATA ST380011A 3.04 PQ: 0 ANSI: 5
Nov 8 10:37:07 localhost kernel: ata2.00: ATAPI: LITE-ON DVD SOHD-16P9S, FS0J, max UDMA/33
Nov 8 10:37:07 localhost kernel: ata2.01: ATAPI: LITE-ON LTR-52246S, 6S0F, max UDMA/33
Nov 8 10:37:07 localhost kernel: ata2.00: configured for UDMA/33
Nov 8 10:37:07 localhost kernel: ata2.01: configured for UDMA/33
Nov 8 10:37:07 localhost kernel: scsi 1:0:0:0: CD-ROM LITE-ON DVD SOHD-16P9S FS0J PQ: 0 ANSI: 5
Nov 8 10:37:07 localhost kernel: scsi 1:0:1:0: CD-ROM LITE-ON LTR-52246S 6S0F PQ: 0 ANSI: 5
Nov 8 10:37:07 localhost kernel: sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
Nov 8 10:37:07 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
Nov 8 10:37:07 localhost kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Nov 8 10:37:07 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Nov 8 10:37:07 localhost kernel: sda:sr0: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
Nov 8 10:37:07 localhost kernel: Uniform CD-ROM driver Revision: 3.20
Nov 8 10:37:07 localhost kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
Nov 8 10:37:07 localhost kernel: sda1 sda2 sda3 sda4 < sda5 sda6 sda7sr1: scsi3-mmc drive: 15x/52x writer cd/rw xa/form2 cdda tray
Nov 8 10:37:07 localhost kernel: sr 1:0:1:0: Attached scsi CD-ROM sr1
Nov 8 10:37:07 localhost kernel: sda8 sda9 sda10 >
Nov 8 10:37:07 localhost kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Nov 8 10:37:07 localhost kernel: EXT3-fs: barriers not enabled
Nov 8 10:37:07 localhost kernel: EXT3-fs (sda2): mounted filesystem with writeback data mode
Nov 8 10:37:07 localhost kernel: kjournald starting. Commit interval 5 seconds
Nov 8 10:37:07 localhost kernel: rtc_cmos 00:03: RTC can wake from S4
Nov 8 10:37:07 localhost kernel: rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Nov 8 10:37:07 localhost kernel: rtc0: alarms up to one year, y3k, 114 bytes nvram
Nov 8 10:37:07 localhost kernel: udev[496]: starting version 163
Nov 8 10:37:07 localhost kernel: fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Nov 8 10:37:07 localhost kernel: Disabling lock debugging due to kernel taint
Nov 8 10:37:07 localhost kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Nov 8 10:37:07 localhost kernel: sr 1:0:0:0: Attached scsi generic sg1 type 5
Nov 8 10:37:07 localhost kernel: sr 1:0:1:0: Attached scsi generic sg2 type 5
Nov 8 10:37:07 localhost kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 8 10:37:07 localhost kernel: input: PC Speaker as /devices/platform/pcspkr/input/input1
Nov 8 10:37:07 localhost kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Nov 8 10:37:07 localhost kernel: usbcore: registered new interface driver usbfs
Nov 8 10:37:07 localhost kernel: usbcore: registered new interface driver hub
Nov 8 10:37:07 localhost kernel: usbcore: registered new device driver usb
Nov 8 10:37:07 localhost kernel: psmouse serio1: ID: 10 00 64
Nov 8 10:37:07 localhost kernel: uhci_hcd: USB Universal Host Controller Interface driver
Nov 8 10:37:07 localhost kernel: uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Nov 8 10:37:07 localhost kernel: uhci_hcd 0000:00:10.0: UHCI Host Controller
Nov 8 10:37:07 localhost kernel: uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
Nov 8 10:37:07 localhost kernel: uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e400
Nov 8 10:37:07 localhost kernel: hub 1-0:1.0: USB hub found
Nov 8 10:37:07 localhost kernel: hub 1-0:1.0: 2 ports detected
Nov 8 10:37:07 localhost kernel: uhci_hcd 0000:00:10.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Nov 8 10:37:07 localhost kernel: uhci_hcd 0000:00:10.1: UHCI Host Controller
Nov 8 10:37:07 localhost kernel: uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
Nov 8 10:37:07 localhost kernel: uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e800
Nov 8 10:37:07 localhost kernel: hub 2-0:1.0: USB hub found
Nov 8 10:37:07 localhost kernel: hub 2-0:1.0: 2 ports detected
Nov 8 10:37:07 localhost kernel: uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
Nov 8 10:37:07 localhost kernel: uhci_hcd 0000:00:10.2: UHCI Host Controller
Nov 8 10:37:07 localhost kernel: uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
Nov 8 10:37:07 localhost kernel: uhci_hcd 0000:00:10.2: irq 21, io base 0x0000ec00
Nov 8 10:37:07 localhost kernel: NET: Registered protocol family 23
Nov 8 10:37:07 localhost kernel: [fglrx] Maximum main memory to use for locked dma buffers: 2880 MBytes.
Nov 8 10:37:07 localhost kernel: [fglrx] vendor: 1002 device: 9495 count: 1
Nov 8 10:37:07 localhost kernel: [fglrx] ioport: bar 1, base 0xc800, size: 0x100
Nov 8 10:37:07 localhost kernel: pci 0000:01:00.0: PCI: Disallowing DAC for device
Nov 8 10:37:07 localhost kernel: [fglrx] Kernel PAT support is enabled
Nov 8 10:37:07 localhost kernel: [fglrx] module loaded - fglrx 8.78.6 [Oct 5 2010] with 1 minors
Nov 8 10:37:07 localhost kernel: hub 3-0:1.0: USB hub found
Nov 8 10:37:07 localhost kernel: hub 3-0:1.0: 2 ports detected
Nov 8 10:37:07 localhost kernel: ACPI: acpi_idle registered with cpuidle
Nov 8 10:37:07 localhost kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
Nov 8 10:37:07 localhost kernel: ACPI: Power Button [PWRB]
Nov 8 10:37:07 localhost kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
Nov 8 10:37:07 localhost kernel: ACPI: Sleep Button [SLPB]
Nov 8 10:37:07 localhost kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
Nov 8 10:37:07 localhost kernel: ACPI: Power Button [PWRF]
Nov 8 10:37:07 localhost kernel: usb 1-1: new full speed USB device using uhci_hcd and address 2
Nov 8 10:37:07 localhost kernel: input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
Nov 8 10:37:07 localhost kernel: ACPI: resource vt596_smbus [io 0x0400-0x0407] conflicts with ACPI region SMOV [??? 0x00000400-0x00000406 flags 0x56]
Nov 8 10:37:07 localhost kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Nov 8 10:37:07 localhost kernel: VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Nov 8 10:37:07 localhost kernel: VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
Nov 8 10:37:07 localhost kernel: NET: Registered protocol family 8
Nov 8 10:37:07 localhost kernel: NET: Registered protocol family 20
Nov 8 10:37:07 localhost kernel: usb 1-1: reset full speed USB device using uhci_hcd and address 2
Nov 8 10:37:07 localhost kernel: usbcore: registered new interface driver speedtch
Nov 8 10:37:07 localhost kernel: speedtch 1-1:1.0: found stage 1 firmware speedtch-1.bin.4.00
Nov 8 10:37:07 localhost kernel: speedtch 1-1:1.0: found stage 2 firmware speedtch-2.bin.4.00
Nov 8 10:37:07 localhost kernel: ATM dev 0: ADSL line is synchronising
Nov 8 10:37:07 localhost kernel: EXT3-fs (sda2): using internal journal
Nov 8 10:37:07 localhost kernel: EXT3-fs: barriers not enabled
Nov 8 10:37:07 localhost kernel: kjournald starting. Commit interval 5 seconds
Nov 8 10:37:07 localhost kernel: EXT3-fs (sda6): using internal journal
Nov 8 10:37:07 localhost kernel: EXT3-fs (sda6): mounted filesystem with writeback data mode
Nov 8 10:37:07 localhost kernel: EXT3-fs: barriers not enabled
Nov 8 10:37:07 localhost kernel: kjournald starting. Commit interval 5 seconds
Nov 8 10:37:07 localhost kernel: EXT3-fs (sda3): using internal journal
Nov 8 10:37:07 localhost kernel: EXT3-fs (sda3): mounted filesystem with writeback data mode
Nov 8 10:37:07 localhost kernel: EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
Nov 8 10:37:07 localhost kernel: Adding 1052220k swap on /dev/sda5. Priority:-1 extents:1 across:1052220k
Nov 8 10:37:09 localhost kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Nov 8 10:37:09 localhost kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Nov 8 10:37:09 localhost kernel: CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
Nov 8 10:37:09 localhost kernel: nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
Nov 8 10:37:09 localhost kernel: sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
Nov 8 10:37:11 localhost kernel: PPP generic driver version 2.4.2
Nov 8 10:37:13 localhost kernel: [fglrx] AGP detected, AgpState = 0x1f000a1b (hardware caps of chipset)
Nov 8 10:37:13 localhost kernel: [fglrx] [agp] enabling AGP with mode=0x1f000b1a
Nov 8 10:37:13 localhost kernel: agpgart-via 0000:00:00.0: AGP 3.5 bridge
Nov 8 10:37:13 localhost kernel: agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
Nov 8 10:37:13 localhost kernel: fglrx_pci 0000:01:00.0: putting AGP V3 device into 8x mode
Nov 8 10:37:13 localhost kernel: [fglrx] AGP enabled, AgpCommand = 0x1f000312 (selected caps)
Nov 8 10:37:13 localhost kernel: [fglrx] Setup AGP aperture
Nov 8 10:37:13 localhost kernel: [fglrx] Could not enable MSI; System prevented initialization
Nov 8 10:37:13 localhost kernel: [fglrx] Firegl kernel thread PID: 2202
Nov 8 10:37:13 localhost kernel: [fglrx] IRQ 16 Enabled
Nov 8 10:37:14 localhost kernel: [fglrx] Gart cacheable size:1318 M.
Nov 8 10:37:14 localhost kernel: [fglrx] Reserved FB block: Shared offset:0, size:1000000
Nov 8 10:37:14 localhost kernel: [fglrx] Reserved FB block: Unshared offset:fd0a000, size:2f6000
Nov 8 10:37:14 localhost kernel: [fglrx] Reserved FB block: Unshared offset:3fffd000, size:3000
Nov 8 10:37:20 localhost kernel: ATM dev 0: ADSL line is up (5312 kb/s down | 320 kb/s up)
Nov 8 10:38:09 localhost kernel: [fglrx] IRQ 16 Disabled
Nov 8 10:38:09 localhost kernel: BUG: scheduling while atomic: X/2191/0x00000002
Nov 8 10:38:09 localhost kernel: Modules linked in: pppoatm ppp_generic slhc xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack iptable_filter ip_tables x_tables ext4 jbd2 crc16 ext2 speedtch usbatm atm snd_via82xx gameport snd_ac97_codec ac97_bus snd_pcm snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device i2c_viapro snd soundcore button thermal processor via_ircc uhci_hcd irda crc_ccitt psmouse usbcore fglrx(P) shpchp pcspkr serio_raw pci_hotplug sg evdev rtc_cmos rtc_core rtc_lib ext3 jbd mbcache sd_mod sr_mod cdrom pata_acpi pata_via libata floppy scsi_mod radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core via_agp agpgart
Nov 8 10:38:09 localhost kernel: Pid: 2191, comm: X Tainted: P 2.6.35-ARCH #1
Nov 8 10:38:09 localhost kernel: Call Trace:
Nov 8 10:38:09 localhost kernel: [<c1034d1d>] __schedule_bug+0x5d/0x70
Nov 8 10:38:09 localhost kernel: [<c12e6dcf>] schedule+0x47f/0x6f0
Nov 8 10:38:09 localhost kernel: [<f8761b22>] ? KAS_Event_Set+0x92/0xa0 [fglrx]
Nov 8 10:38:09 localhost kernel: [<c12e9505>] ? _raw_spin_unlock_irqrestore+0x25/0x30
Nov 8 10:38:09 localhost kernel: [<f87624a6>] KAS_Thread_WaitForFinish+0x86/0xc0 [fglrx]
Nov 8 10:38:09 localhost kernel: [<c105eb30>] ? autoremove_wake_function+0x0/0x40
Nov 8 10:38:09 localhost kernel: [<f877bafa>] MCIL_WorkerThread+0x1da/0x2c0 [fglrx]
Nov 8 10:38:09 localhost kernel: [<f8841790>] ? PassiveRing_Cleanup+0x60/0xc0 [fglrx]
Nov 8 10:38:09 localhost kernel: [<f8791e58>] ? firegl_trace+0x28/0x190 [fglrx]
Nov 8 10:38:09 localhost kernel: [<f8840d01>] IRQMGR_FreeResources+0x21/0x60 [fglrx]
Nov 8 10:38:09 localhost kernel: [<f877e87e>] irqmgr_wrap_shutdown+0x17e/0x1d0 [fglrx]
Nov 8 10:38:09 localhost kernel: [<f876e4c9>] ? firegl_takedown+0x989/0xa60 [fglrx]
Nov 8 10:38:09 localhost kernel: [<f885600d>] ? amdPcsClose+0x3d/0x40 [fglrx]
Nov 8 10:38:09 localhost kernel: [<f876d35f>] ? firegl_release+0x14f/0x220 [fglrx]
Nov 8 10:38:09 localhost kernel: [<f875e5be>] ? ip_firegl_release+0xe/0x10 [fglrx]
Nov 8 10:38:09 localhost kernel: [<c10f8153>] ? fput+0xf3/0x1f0
Nov 8 10:38:09 localhost kernel: [<c10f4f69>] ? filp_close+0x49/0x70
Nov 8 10:38:09 localhost kernel: [<c1046d57>] ? put_files_struct+0x87/0x100
Nov 8 10:38:09 localhost kernel: [<c1046e72>] ? exit_files+0x42/0x60
Nov 8 10:38:09 localhost kernel: [<c104727a>] ? do_exit+0x14a/0x770
Nov 8 10:38:09 localhost kernel: [<c1053f0d>] ? __sigqueue_free+0x2d/0x30
Nov 8 10:38:09 localhost kernel: [<c1053162>] ? recalc_sigpending+0x12/0x30
Nov 8 10:38:09 localhost kernel: [<c1047ab9>] ? do_group_exit+0x39/0xa0
Nov 8 10:38:09 localhost kernel: [<c10563ad>] ? get_signal_to_deliver+0x25d/0x470
Nov 8 10:38:09 localhost kernel: [<c1054e12>] ? __send_signal+0x162/0x390
Nov 8 10:38:09 localhost kernel: [<c1002909>] ? do_signal+0x69/0x870
Nov 8 10:38:09 localhost kernel: [<c105592f>] ? do_send_specific+0x7f/0xc0
Nov 8 10:38:09 localhost kernel: [<c1183c90>] ? _atomic_dec_and_lock+0x50/0x70
Nov 8 10:38:09 localhost kernel: [<c110e426>] ? mntput_no_expire+0x16/0x90
Nov 8 10:38:09 localhost kernel: [<c1053162>] ? recalc_sigpending+0x12/0x30
Nov 8 10:38:09 localhost kernel: [<c1053e65>] ? sigprocmask+0x75/0xf0
Nov 8 10:38:09 localhost kernel: [<c10567b4>] ? sys_rt_sigprocmask+0xc4/0xe0
Nov 8 10:38:09 localhost kernel: [<c10567b4>] ? sys_rt_sigprocmask+0xc4/0xe0
Nov 8 10:38:09 localhost kernel: [<c10033fd>] ? do_notify_resume+0x5d/0x70
Nov 8 10:38:09 localhost kernel: [<c12e9af8>] ? work_notifysig+0x13/0x1b
Nov 8 10:38:10 localhost kernel: [fglrx] AGP detected, AgpState = 0x1f000a1b (hardware caps of chipset)
Nov 8 10:38:10 localhost kernel: [fglrx] [agp] enabling AGP with mode=0x1f000b1a
Nov 8 10:38:10 localhost kernel: agpgart-via 0000:00:00.0: AGP 3.5 bridge
Nov 8 10:38:10 localhost kernel: agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
Nov 8 10:38:10 localhost kernel: fglrx_pci 0000:01:00.0: putting AGP V3 device into 8x mode
Nov 8 10:38:10 localhost kernel: [fglrx] AGP enabled, AgpCommand = 0x1f000312 (selected caps)
Nov 8 10:38:10 localhost kernel: [fglrx] Setup AGP aperture
Nov 8 10:38:10 localhost kernel: [fglrx] Firegl kernel thread PID: 2426
Nov 8 10:38:10 localhost kernel: [fglrx] IRQ 16 Enabled
Nov 8 10:38:11 localhost kernel: [fglrx] Gart cacheable size:1318 M.
Nov 8 10:38:11 localhost kernel: [fglrx] Reserved FB block: Shared offset:0, size:1000000
Nov 8 10:38:11 localhost kernel: [fglrx] Reserved FB block: Unshared offset:fd0a000, size:2f6000
Nov 8 10:38:11 localhost kernel: [fglrx] Reserved FB block: Unshared offset:3fffd000, size:3000
Nov 8 10:38:33 localhost kernel: [fglrx] IRQ 16 Disabled
2) Sometimes computer freeze while I working in KDE. I don't save logs, but I remeber that:
X: page allocation failure
in kernel.log.
Can anyone has tips or workarounds for this bugs (or just catalyst proprietary driver is piece of sh*t?)?
Can anyone help?I guess I have the same issue ( https://bbs.archlinux.org/viewtopic.php?id=108083 ). I removed the catalyst package and installed the open source driver (packages: xf86-video-ati and ati-dri) as a workaround to wait until the issue is resolved. If you want to do that, remember to update your xorg.conf (you can simple rename that... it's not needed with ati driver) and rc.conf (unblacklist the radeon module). Maybe downgrading to Xorg 1.8 and installing older driver would help. Hopefully somebody with greater knowledge will notice this problem.
Last edited by kleofas (2010-11-11 12:42:38) -
So I thought everything was fine until an application told me I had 4gb of RAM which is a far cry from the installed 16gb.
I did plenty of digging around and narrowed it down to a couple possibilities, but first my investigation:
I started with free:
[vuvffufg@HereAndNow-Main ~]$ free
total used free shared buff/cache available
Mem: 4015688 858084 115144 24832 3042460 2860360
Swap: 16777212 22460 16754752
As you can see it shows their is 4gb of RAM much as the application did.
You can see I have 16gb of swap; I am aware and am not confusing swap with RAM, I damn well have 4x4gb sticks according to the memtest86+ option on boot.
So then I thought hardware and tried dmidecode --type memory:
[vuvffufg@HereAndNow-Main ~]$ sudo dmidecode --type memory
[sudo] password for vuvffufg:
# dmidecode 2.12
SMBIOS 2.7 present.
Handle 0x0008, DMI type 5, 24 bytes
Memory Controller Information
Error Detecting Method: 64-bit ECC
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 2048 MB
Maximum Total Memory Size: 8192 MB
Supported Speeds:
70 ns
60 ns
Supported Memory Types:
DIMM
SDRAM
Memory Module Voltage: 3.3 V
Associated Memory Slots: 4
0x0009
0x000A
0x000B
0x000C
Enabled Error Correcting Capabilities:
None
Handle 0x0009, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM0
Bank Connections: 0 1
Current Speed: 60 ns
Type: DIMM SDRAM
Installed Size: 536870912 MB (Single-bank Connection)
Enabled Size: 536870912 MB (Single-bank Connection)
Error Status: OK
Handle 0x000A, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM1
Bank Connections: 2 3
Current Speed: 60 ns
Type: DIMM SDRAM
Installed Size: 536870912 MB (Single-bank Connection)
Enabled Size: 536870912 MB (Single-bank Connection)
Error Status: OK
Handle 0x000B, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM2
Bank Connections: 4 5
Current Speed: 60 ns
Type: DIMM SDRAM
Installed Size: 536870912 MB (Single-bank Connection)
Enabled Size: 536870912 MB (Single-bank Connection)
Error Status: OK
Handle 0x000C, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM3
Bank Connections: 6 7
Current Speed: 60 ns
Type: DIMM SDRAM
Installed Size: 536870912 MB (Single-bank Connection)
Enabled Size: 536870912 MB (Single-bank Connection)
Error Status: OK
Handle 0x002C, DMI type 16, 23 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 32 GB
Error Information Handle: Not Provided
Number Of Devices: 4
Handle 0x002E, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x002C
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: DIMM
Set: None
Locator: Node0_Dimm0
Bank Locator: Node0_Bank0
Type: DDR3
Type Detail: Synchronous Unbuffered (Unregistered)
Speed: 667 MHz
Manufacturer: Corsair
Serial Number: ADADB481
Asset Tag: Dimm0_AssetTag
Part Number: CMZ8GX3M2A160
Rank: 2
Configured Clock Speed: 667 MHz
Handle 0x0030, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x002C
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: DIMM
Set: None
Locator: Node0_Dimm1
Bank Locator: Node0_Bank0
Type: DDR3
Type Detail: Synchronous Unbuffered (Unregistered)
Speed: 667 MHz
Manufacturer: Corsair
Serial Number: 00000000
Asset Tag: Dimm1_AssetTag
Part Number: CMZ8GX3M2A160
Rank: 1
Configured Clock Speed: 667 MHz
Handle 0x0032, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x002C
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: DIMM
Set: None
Locator: Node0_Dimm2
Bank Locator: Node0_Bank0
Type: DDR3
Type Detail: Synchronous Unbuffered (Unregistered)
Speed: 667 MHz
Manufacturer: Corsair
Serial Number: ADADB473
Asset Tag: Dimm2_AssetTag
Part Number: CMZ8GX3M2A160
Rank: 2
Configured Clock Speed: 667 MHz
Handle 0x0034, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x002C
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: DIMM
Set: None
Locator: Node0_Dimm3
Bank Locator: Node0_Bank0
Type: DDR3
Type Detail: Synchronous Unbuffered (Unregistered)
Speed: 667 MHz
Manufacturer: Corsair
Serial Number: 00000000
Asset Tag: Dimm3_AssetTag
Part Number: CMZ8GX3M2A160
Rank: 1
Configured Clock Speed: 667 MHz
Found it quite strange that the OS can obviously see the memory it just isn't being allocated, also what is with the slow clock speeds?
I found a similar output with lshw.
So I moved on to checking how it is actually initialized in dmesg, and honestly a lot of what was output I don't quite understand, I noticed that some memory was being reserved by the RAM map given by BIOs yet have no obvious way of disabling the BIOs RAM scheduler.
[vuvffufg@HereAndNow-Main ~]$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.2-1-ARCH (builduser@tobias) (gcc version 4.9.2 20150304 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Mar 18 16:21:02 CET 2015
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=13722890-9f97-423a-bfec-7c95d6e8174e rw quiet splash iommu=pt
[ 0.000000] tseg: 00bf800000
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000be857fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000be858000-0x00000000bea2ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bea30000-0x00000000bea39fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bea3a000-0x00000000bee2bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bee2c000-0x00000000bf159fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf15a000-0x00000000bf15afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf15b000-0x00000000bf360fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf361000-0x00000000bf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000013effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./990FXA-UD3, BIOS F2 07/15/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x13f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000BF800000 mask FFFFFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000013f000000 aka 5104M
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd810-0x000fd81f] mapped at [ffff8800000fd810]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13ee00000-0x13effffff]
[ 0.000000] [mem 0x13ee00000-0x13effffff] page 2M
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x120000000-0x13edfffff]
[ 0.000000] [mem 0x120000000-0x13edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100001000-0x11fffffff]
[ 0.000000] [mem 0x100001000-0x1001fffff] page 4k
[ 0.000000] [mem 0x100200000-0x11fffffff] page 2M
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbe857fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xbe7fffff] page 2M
[ 0.000000] [mem 0xbe800000-0xbe857fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf15a000-0xbf15afff]
[ 0.000000] [mem 0xbf15a000-0xbf15afff] page 4k
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbf361000-0xbf7fffff]
[ 0.000000] [mem 0xbf361000-0xbf3fffff] page 4k
[ 0.000000] [mem 0xbf400000-0xbf7fffff] page 2M
[ 0.000000] RAMDISK: [mem 0x377f0000-0x37beffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000BEA32070 00005C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000BEA37D20 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20141107/tbfadt-649)
[ 0.000000] ACPI: DSDT 0x00000000BEA32158 005BC1 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000BEE26F80 000040
[ 0.000000] ACPI: APIC 0x00000000BEA37E18 00009E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000BEA37EB8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000BEA37F00 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x00000000BEA37F40 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: SSDT 0x00000000BEA37F78 001714 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: IVRS 0x00000000BEA39690 0000C8 (v01 AMD RD890S 00202031 AMD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x13eff9000-0x13effcfff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013a600000-ffff88013e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xbe857fff]
[ 0.000000] node 0: [mem 0xbf15a000-0xbf15afff]
[ 0.000000] node 0: [mem 0xbf361000-0xbf7fffff]
[ 0.000000] node 0: [mem 0x100001000-0x13effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x13effffff]
[ 0.000000] On node 0 totalpages: 1039508
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12148 pages used for memmap
[ 0.000000] DMA32 zone: 777464 pages, LIFO batch:31
[ 0.000000] Normal zone: 4032 pages used for memmap
[ 0.000000] Normal zone: 258047 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec20000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbe858000-0xbea2ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbea30000-0xbea39fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbea3a000-0xbee2bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbee2c000-0xbf159fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf15b000-0xbf360fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[ 0.000000] e820: [mem 0xbf800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88013ec00000 s86336 r8192 d32448 u262144
[ 0.000000] pcpu-alloc: s86336 r8192 d32448 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1023243
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=13722890-9f97-423a-bfec-7c95d6e8174e rw quiet splash iommu=pt
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
[ 0.000000] Memory: 4009504K/4158032K available (5533K kernel code, 917K rwdata, 1744K rodata, 1164K init, 1156K bss, 148528K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:1032 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 4018.290 MHz processor
[ 0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 8039.43 BogoMIPS (lpj=13394300)
[ 0.000025] pid_max: default: 32768 minimum: 301
[ 0.000031] ACPI: Core revision 20141107
[ 0.002553] ACPI: All ACPI Tables successfully acquired
[ 0.002750] Security Framework initialized
[ 0.002758] Yama: becoming mindful.
[ 0.002999] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.004346] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004926] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.004931] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.005146] Initializing cgroup subsys memory
[ 0.005153] Initializing cgroup subsys devices
[ 0.005155] Initializing cgroup subsys freezer
[ 0.005158] Initializing cgroup subsys net_cls
[ 0.005160] Initializing cgroup subsys blkio
[ 0.005177] CPU: Physical Processor ID: 0
[ 0.005178] CPU: Processor Core ID: 0
[ 0.005180] mce: CPU supports 7 MCE banks
[ 0.005185] LVT offset 1 assigned for vector 0xf9
[ 0.005190] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.005254] Freeing SMP alternatives memory: 20K (ffffffff81a0a000 - ffffffff81a0f000)
[ 0.005835] ftrace: allocating 21170 entries in 83 pages
[ 0.087004] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.120030] smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (fam: 15, model: 02, stepping: 00)
[ 0.224266] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.224270] ... version: 0
[ 0.224271] ... bit width: 48
[ 0.224272] ... generic registers: 6
[ 0.224273] ... value mask: 0000ffffffffffff
[ 0.224274] ... max period: 00007fffffffffff
[ 0.224275] ... fixed-purpose events: 0
[ 0.224276] ... event mask: 000000000000003f
[ 0.237668] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.244346] x86: Booting SMP configuration:
[ 0.244347] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.354188] x86: Booted up 1 node, 8 CPUs
[ 0.354192] smpboot: Total of 8 processors activated (64318.50 BogoMIPS)
[ 0.364078] devtmpfs: initialized
[ 0.366485] PM: Registering ACPI NVS region [mem 0xbea3a000-0xbee2bfff] (4136960 bytes)
[ 0.366531] PM: Registering ACPI NVS region [mem 0xbf15b000-0xbf360fff] (2121728 bytes)
[ 0.366716] pinctrl core: initialized pinctrl subsystem
[ 0.366744] RTC time: 18:28:15, date: 04/01/15
[ 0.366834] NET: Registered protocol family 16
[ 0.377691] cpuidle: using governor ladder
[ 0.391032] cpuidle: using governor menu
[ 0.391080] ACPI: bus type PCI registered
[ 0.391082] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.391143] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.391146] PCI: not using MMCONFIG
[ 0.391147] PCI: Using configuration type 1 for base access
[ 0.391148] PCI: Using configuration type 1 for extended access
[ 0.391412] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.391413] mtrr: probably your BIOS does not setup all CPUs.
[ 0.391413] mtrr: corrected configuration.
[ 0.404756] ACPI: Added _OSI(Module Device)
[ 0.404758] ACPI: Added _OSI(Processor Device)
[ 0.404759] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.404760] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.406816] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.410092] ACPI: Interpreter enabled
[ 0.410097] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[ 0.410100] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[ 0.410113] ACPI: (supports S0 S3 S4 S5)
[ 0.410115] ACPI: Using IOAPIC for interrupt routing
[ 0.410239] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.410276] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.410593] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.416283] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.416288] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.416292] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.416712] PCI host bridge to bus 0000:00
[ 0.416715] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.416717] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.416718] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.416720] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.416721] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.416723] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.416724] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.416726] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.416735] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[ 0.416847] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
[ 0.416951] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[ 0.416985] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.417032] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.417072] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
[ 0.417104] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.417151] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.417185] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
[ 0.417217] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.417263] pci 0000:00:0a.0: System wakeup disabled by ACPI
[ 0.417308] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.417322] pci 0000:00:11.0: reg 0x10: [io 0xf090-0xf097]
[ 0.417329] pci 0000:00:11.0: reg 0x14: [io 0xf080-0xf083]
[ 0.417336] pci 0000:00:11.0: reg 0x18: [io 0xf070-0xf077]
[ 0.417343] pci 0000:00:11.0: reg 0x1c: [io 0xf060-0xf063]
[ 0.417350] pci 0000:00:11.0: reg 0x20: [io 0xf050-0xf05f]
[ 0.417357] pci 0000:00:11.0: reg 0x24: [mem 0xfe40b000-0xfe40b3ff]
[ 0.417461] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.417471] pci 0000:00:12.0: reg 0x10: [mem 0xfe40a000-0xfe40afff]
[ 0.417556] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.417595] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.417609] pci 0000:00:12.2: reg 0x10: [mem 0xfe409000-0xfe4090ff]
[ 0.417671] pci 0000:00:12.2: supports D1 D2
[ 0.417672] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.417721] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.417760] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.417770] pci 0000:00:13.0: reg 0x10: [mem 0xfe408000-0xfe408fff]
[ 0.417851] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.417891] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.417905] pci 0000:00:13.2: reg 0x10: [mem 0xfe407000-0xfe4070ff]
[ 0.417966] pci 0000:00:13.2: supports D1 D2
[ 0.417967] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.418015] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.418053] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.418166] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.418176] pci 0000:00:14.1: reg 0x10: [io 0xf040-0xf047]
[ 0.418183] pci 0000:00:14.1: reg 0x14: [io 0xf030-0xf033]
[ 0.418190] pci 0000:00:14.1: reg 0x18: [io 0xf020-0xf027]
[ 0.418197] pci 0000:00:14.1: reg 0x1c: [io 0xf010-0xf013]
[ 0.418204] pci 0000:00:14.1: reg 0x20: [io 0xf000-0xf00f]
[ 0.418219] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.418220] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.418221] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.418222] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.418300] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.418316] pci 0000:00:14.2: reg 0x10: [mem 0xfe400000-0xfe403fff 64bit]
[ 0.418365] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.418410] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.418445] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.418561] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.418627] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.418661] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.418671] pci 0000:00:14.5: reg 0x10: [mem 0xfe406000-0xfe406fff]
[ 0.418754] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.418790] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.418800] pci 0000:00:16.0: reg 0x10: [mem 0xfe405000-0xfe405fff]
[ 0.418883] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.418922] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.418936] pci 0000:00:16.2: reg 0x10: [mem 0xfe404000-0xfe4040ff]
[ 0.418998] pci 0000:00:16.2: supports D1 D2
[ 0.418999] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.419045] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.419083] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[ 0.419160] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[ 0.419231] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[ 0.419304] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[ 0.419379] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[ 0.419451] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[ 0.419570] pci 0000:01:00.0: [10de:0fc1] type 00 class 0x030000
[ 0.419581] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.419591] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.419600] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.419607] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.419614] pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
[ 0.419708] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
[ 0.419718] pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
[ 0.424396] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.424400] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.424402] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
[ 0.424406] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.424450] pci 0000:02:00.0: [1106:3483] type 00 class 0x0c0330
[ 0.424463] pci 0000:02:00.0: reg 0x10: [mem 0xfe300000-0xfe300fff 64bit]
[ 0.424519] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.431063] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.431067] pci 0000:00:09.0: bridge window [mem 0xfe300000-0xfe3fffff]
[ 0.431115] pci 0000:03:00.0: [1b4b:9172] type 00 class 0x010601
[ 0.431125] pci 0000:03:00.0: reg 0x10: [io 0xd040-0xd047]
[ 0.431131] pci 0000:03:00.0: reg 0x14: [io 0xd030-0xd033]
[ 0.431137] pci 0000:03:00.0: reg 0x18: [io 0xd020-0xd027]
[ 0.431143] pci 0000:03:00.0: reg 0x1c: [io 0xd010-0xd013]
[ 0.431149] pci 0000:03:00.0: reg 0x20: [io 0xd000-0xd00f]
[ 0.431155] pci 0000:03:00.0: reg 0x24: [mem 0xfe210000-0xfe2101ff]
[ 0.431161] pci 0000:03:00.0: reg 0x30: [mem 0xfe200000-0xfe20ffff pref]
[ 0.431194] pci 0000:03:00.0: PME# supported from D3hot
[ 0.437733] pci 0000:00:0a.0: PCI bridge to [bus 03]
[ 0.437737] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.437739] pci 0000:00:0a.0: bridge window [mem 0xfe200000-0xfe2fffff]
[ 0.437784] pci 0000:04:06.0: [10ec:8169] type 00 class 0x020000
[ 0.437802] pci 0000:04:06.0: reg 0x10: [io 0xc000-0xc0ff]
[ 0.437812] pci 0000:04:06.0: reg 0x14: [mem 0xfe121000-0xfe1210ff]
[ 0.437855] pci 0000:04:06.0: reg 0x30: [mem 0xfe100000-0xfe11ffff pref]
[ 0.437888] pci 0000:04:06.0: supports D1 D2
[ 0.437889] pci 0000:04:06.0: PME# supported from D1 D2 D3hot D3cold
[ 0.437947] pci 0000:04:0e.0: [1106:3044] type 00 class 0x0c0010
[ 0.437965] pci 0000:04:0e.0: reg 0x10: [mem 0xfe120000-0xfe1207ff]
[ 0.437975] pci 0000:04:0e.0: reg 0x14: [io 0xc100-0xc17f]
[ 0.438055] pci 0000:04:0e.0: supports D2
[ 0.438056] pci 0000:04:0e.0: PME# supported from D2 D3hot D3cold
[ 0.438114] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.438117] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.438120] pci 0000:00:14.4: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.438123] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.438125] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.438126] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.438128] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.438129] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.438131] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.438132] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.438151] pci_bus 0000:00: on NUMA node 0
[ 0.438559] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 0.438620] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 0.438682] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 0.438744] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[ 0.438794] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 10 11 14 15) *0
[ 0.438856] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 14 15) *0
[ 0.438896] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 14 15) *0
[ 0.438935] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 10 11 14 15) *0
[ 0.439110] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.439112] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.439114] vgaarb: loaded
[ 0.439115] vgaarb: bridge control possible 0000:01:00.0
[ 0.439189] PCI: Using ACPI for IRQ routing
[ 0.445486] PCI: pci_cache_line_size set to 64 bytes
[ 0.445539] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.445541] e820: reserve RAM buffer [mem 0xbe858000-0xbfffffff]
[ 0.445542] e820: reserve RAM buffer [mem 0xbf15b000-0xbfffffff]
[ 0.445543] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[ 0.445544] e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
[ 0.445636] NetLabel: Initializing
[ 0.445637] NetLabel: domain hash size = 128
[ 0.445638] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.445647] NetLabel: unlabeled traffic allowed by default
[ 0.445664] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.445666] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.447711] Switched to clocksource hpet
[ 0.453281] pnp: PnP ACPI init
[ 0.453370] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.453373] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.453631] system 00:01: [io 0x040b] has been reserved
[ 0.453633] system 00:01: [io 0x04d6] has been reserved
[ 0.453634] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.453636] system 00:01: [io 0x0c14] has been reserved
[ 0.453638] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.453639] system 00:01: [io 0x0c52] has been reserved
[ 0.453641] system 00:01: [io 0x0c6c] has been reserved
[ 0.453642] system 00:01: [io 0x0c6f] has been reserved
[ 0.453644] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.453646] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.453647] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.453649] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.453650] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.453652] system 00:01: [io 0x0800-0x089f] could not be reserved
[ 0.453654] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.453655] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.453657] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.453659] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.453661] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.453663] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.453665] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.453667] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.453669] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.453671] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.453673] system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.453675] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.453821] system 00:02: [io 0x0220-0x0227] has been reserved
[ 0.453823] system 00:02: [io 0x0228-0x0237] has been reserved
[ 0.453825] system 00:02: [io 0x0a20-0x0a2f] has been reserved
[ 0.453827] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454077] pnp 00:03: [dma 0 disabled]
[ 0.454116] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.454146] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.454202] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.454205] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454242] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454375] system 00:07: [mem 0xfeb20000-0xfeb23fff] could not be reserved
[ 0.454377] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454493] system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved
[ 0.454495] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454597] pnp: PnP ACPI: found 9 devices
[ 0.461181] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.461184] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.461186] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
[ 0.461189] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.461192] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.461194] pci 0000:00:09.0: bridge window [mem 0xfe300000-0xfe3fffff]
[ 0.461198] pci 0000:00:0a.0: PCI bridge to [bus 03]
[ 0.461199] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.461202] pci 0000:00:0a.0: bridge window [mem 0xfe200000-0xfe2fffff]
[ 0.461205] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.461207] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.461211] pci 0000:00:14.4: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.461217] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.461219] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.461221] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.461222] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.461224] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.461225] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.461227] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.461228] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.461230] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
[ 0.461231] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.461233] pci_bus 0000:02: resource 1 [mem 0xfe300000-0xfe3fffff]
[ 0.461234] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.461236] pci_bus 0000:03: resource 1 [mem 0xfe200000-0xfe2fffff]
[ 0.461237] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.461239] pci_bus 0000:04: resource 1 [mem 0xfe100000-0xfe1fffff]
[ 0.461240] pci_bus 0000:04: resource 4 [io 0x0000-0x03af]
[ 0.461241] pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7]
[ 0.461243] pci_bus 0000:04: resource 6 [io 0x03b0-0x03df]
[ 0.461244] pci_bus 0000:04: resource 7 [io 0x0d00-0xffff]
[ 0.461246] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.461247] pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.461248] pci_bus 0000:04: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.461266] NET: Registered protocol family 2
[ 0.461445] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.461541] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.461669] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.461704] TCP: reno registered
[ 0.461711] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.461735] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.461786] NET: Registered protocol family 1
[ 0.771487] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.771739] PCI: CLS 64 bytes, default 64
[ 0.771777] Unpacking initramfs...
[ 0.818296] Freeing initrd memory: 4096K (ffff8800377f0000 - ffff880037bf0000)
[ 0.818928] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 0.818930] AMD-Vi: Interrupt remapping enabled
[ 0.819044] AMD-Vi: Initialized for Passthrough Mode
[ 0.894098] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.894100] software IO TLB [mem 0xba858000-0xbe858000] (64MB) mapped at [ffff8800ba858000-ffff8800be857fff]
[ 0.894417] perf: AMD NB counters detected
[ 0.894473] microcode: CPU0: patch_level=0x06000822
[ 0.894480] microcode: CPU1: patch_level=0x06000822
[ 0.894489] microcode: CPU2: patch_level=0x06000822
[ 0.894497] microcode: CPU3: patch_level=0x06000822
[ 0.894505] microcode: CPU4: patch_level=0x06000822
[ 0.894512] microcode: CPU5: patch_level=0x06000822
[ 0.894520] microcode: CPU6: patch_level=0x06000822
[ 0.894528] microcode: CPU7: patch_level=0x06000822
[ 0.894571] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.894574] LVT offset 0 assigned for vector 0x400
[ 0.894593] perf: AMD IBS detected (0x000000ff)
[ 0.894612] Scanning for low memory corruption every 60 seconds
[ 0.894922] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.894967] Initialise system trusted keyring
[ 0.895290] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.896718] zpool: loaded
[ 0.896720] zbud: loaded
[ 0.896855] VFS: Disk quotas dquot_6.5.2
[ 0.896887] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.897041] Key type big_key registered
[ 0.897219] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.897278] io scheduler noop registered
[ 0.897280] io scheduler deadline registered
[ 0.897311] io scheduler cfq registered (default)
[ 0.897582] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.897597] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.897611] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 0.897612] vesafb: scrolling: redraw
[ 0.897613] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.897630] vesafb: framebuffer at 0xd1000000, mapped to 0xffffc90010780000, using 5120k, total 5120k
[ 0.908558] Console: switching to colour frame buffer device 160x64
[ 0.919363] fb0: VESA VGA frame buffer device
[ 0.919406] GHES: HEST is not enabled!
[ 0.919477] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.939995] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.940350] Linux agpgart interface v0.103
[ 0.940412] rtc_cmos 00:04: RTC can wake from S4
[ 0.940505] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.940526] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.940538] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.940741] TCP: cubic registered
[ 0.940831] NET: Registered protocol family 10
[ 0.941040] NET: Registered protocol family 17
[ 0.941657] Loading compiled-in X.509 certificates
[ 0.941667] registered taskstats version 1
[ 0.942038] Magic number: 11:895:492
[ 0.942102] rtc_cmos 00:04: setting system clock to 2015-04-01 18:28:16 UTC (1427912896)
[ 0.942169] PM: Hibernation image not present or could not be loaded.
[ 0.942657] Freeing unused kernel memory: 1164K (ffffffff818e7000 - ffffffff81a0a000)
[ 0.942658] Write protecting the kernel read-only data: 8192k
[ 0.943029] Freeing unused kernel memory: 600K (ffff88000156a000 - ffff880001600000)
[ 0.943194] Freeing unused kernel memory: 304K (ffff8800017b4000 - ffff880001800000)
[ 0.948897] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.960384] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.960767] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.960819] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.965753] ACPI: bus type USB registered
[ 0.965786] usbcore: registered new interface driver usbfs
[ 0.965799] usbcore: registered new interface driver hub
[ 0.965834] SCSI subsystem initialized
[ 0.965866] usbcore: registered new device driver usb
[ 0.966937] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.967199] QUIRK: Enable AMD PLL fix
[ 0.967214] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.967216] ehci-pci: EHCI PCI platform driver
[ 0.967220] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[ 0.967486] hub 1-0:1.0: USB hub found
[ 0.967493] hub 1-0:1.0: 1 port detected
[ 0.967607] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.967610] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 0.967627] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 0.967789] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.967791] libata version 3.00 loaded.
[ 0.967804] hub 2-0:1.0: USB hub found
[ 0.967816] hub 2-0:1.0: 4 ports detected
[ 0.967981] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3
[ 0.967988] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.967999] ehci-pci 0000:00:12.2: debug port 1
[ 0.968051] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe409000
[ 0.968187] ohci-pci: OHCI PCI platform driver
[ 0.978101] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.978260] hub 3-0:1.0: USB hub found
[ 0.978266] hub 3-0:1.0: 5 ports detected
[ 0.978471] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 0.978476] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 0.978478] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.978487] ehci-pci 0000:00:13.2: debug port 1
[ 0.978508] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe407000
[ 0.988131] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.988272] hub 4-0:1.0: USB hub found
[ 0.988277] hub 4-0:1.0: 5 ports detected
[ 0.988478] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 0.988483] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5
[ 0.988485] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.988493] ehci-pci 0000:00:16.2: debug port 1
[ 0.988514] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe404000
[ 0.998136] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 0.998291] hub 5-0:1.0: USB hub found
[ 0.998297] hub 5-0:1.0: 4 ports detected
[ 0.998517] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 0.998523] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6
[ 0.998580] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe40a000
[ 1.028176] firewire_ohci 0000:04:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.055675] hub 6-0:1.0: USB hub found
[ 1.055685] hub 6-0:1.0: 5 ports detected
[ 1.055891] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.055896] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7
[ 1.055912] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe408000
[ 1.112371] hub 7-0:1.0: USB hub found
[ 1.112380] hub 7-0:1.0: 5 ports detected
[ 1.112585] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.112589] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8
[ 1.112604] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe406000
[ 1.169060] hub 8-0:1.0: USB hub found
[ 1.169069] hub 8-0:1.0: 2 ports detected
[ 1.169230] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 1.169234] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9
[ 1.169248] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe405000
[ 1.225793] hub 9-0:1.0: USB hub found
[ 1.225802] hub 9-0:1.0: 4 ports detected
[ 1.226758] scsi host0: pata_atiixp
[ 1.226866] scsi host1: pata_atiixp
[ 1.226908] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.226910] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.226935] ahci 0000:00:11.0: version 3.0
[ 1.227077] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 1.227079] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 1.227581] scsi host2: ahci
[ 1.227687] scsi host3: ahci
[ 1.227790] scsi host4: ahci
[ 1.227894] scsi host5: ahci
[ 1.227941] ata3: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b100 irq 19
[ 1.227943] ata4: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b180 irq 19
[ 1.227945] ata5: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b200 irq 19
[ 1.227947] ata6: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b280 irq 19
[ 1.228069] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.228071] ahci 0000:03:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 1.228368] scsi host6: ahci
[ 1.228467] scsi host7: ahci
[ 1.228518] ata7: SATA max UDMA/133 abar m512@0xfe210000 port 0xfe210100 irq 32
[ 1.228520] ata8: SATA max UDMA/133 abar m512@0xfe210000 port 0xfe210180 irq 32
[ 1.271654] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.389601] ata1.00: supports DRM functions and may not be fully accessible
[ 1.389604] ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT01B6Q, max UDMA/133
[ 1.389606] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 1.390019] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 1.395403] ata1.00: supports DRM functions and may not be fully accessible
[ 1.395767] ata1.00: configured for UDMA/33
[ 1.395882] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
[ 1.403230] hub 1-1:1.0: USB hub found
[ 1.403326] hub 1-1:1.0: 4 ports detected
[ 1.528533] firewire_core 0000:04:0e.0: created device fw0: GUID 0049e550700d0d00, S400
[ 1.531822] usb 6-2: new full-speed USB device number 2 using ohci-pci
[ 1.541816] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.541830] usb 7-4: new full-speed USB device number 2 using ohci-pci
[ 1.548468] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.700539] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.705803] usbcore: registered new interface driver usbhid
[ 1.705804] usbhid: USB HID core driver
[ 1.707736] input: Turtle Beach Turtle Beach PX21 Headset as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.3/0003:10F5:0235.0001/input/input2
[ 1.711930] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.711950] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.711968] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.711986] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.714459] ata5.00: ATAPI: ATAPI iHAS424 B, GL14, max UDMA/100
[ 1.715245] ata5.00: configured for UDMA/100
[ 1.724780] ata6.00: ATAPI: ATAPI DVD A DH16A3L, 8H1F, max UDMA/100
[ 1.727806] logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-4/input2
[ 1.738060] ata6.00: configured for UDMA/100
[ 1.738990] ata4.00: ATA-8: ST3750528AS, CC44, max UDMA/133
[ 1.738992] ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.752852] ata3.00: ATA-7: ST3250620AS, 3.AAE, max UDMA/133
[ 1.752855] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.758678] hid-generic 0003:10F5:0235.0001: input,hidraw1: USB HID v1.00 Device [Turtle Beach Turtle Beach PX21 Headset] on usb-0000:00:12.0-2/input3
[ 1.778584] ata4.00: configured for UDMA/133
[ 1.811234] ata3.00: configured for UDMA/133
[ 1.811298] scsi 2:0:0:0: Direct-Access ATA ST3250620AS E PQ: 0 ANSI: 5
[ 1.811508] scsi 3:0:0:0: Direct-Access ATA ST3750528AS CC44 PQ: 0 ANSI: 5
[ 1.815331] scsi 4:0:0:0: CD-ROM ATAPI iHAS424 B GL14 PQ: 0 ANSI: 5
[ 1.827195] scsi 5:0:0:0: CD-ROM ATAPI DVD A DH16A3L 8H1F PQ: 0 ANSI: 5
[ 1.838181] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.838236] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.838264] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.838266] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.838275] sd 0:0:0:0: [sda] Write Protect is off
[ 1.838279] sd 3:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 1.838281] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.838285] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.838307] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.838310] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.838312] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.838324] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.840319] sda: sda1 sda2
[ 1.840687] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.851264] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.851267] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.851394] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.853588] sdc: sdc1 sdc2 sdc3 sdc4
[ 1.853870] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.859267] sdb: sdb1 sdb2
[ 1.859479] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.864173] sr 5:0:0:0: [sr1] scsi3-mmc drive: 40x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.864316] sr 5:0:0:0: Attached scsi CD-ROM sr1
[ 1.895367] tsc: Refined TSC clocksource calibration: 4018.371 MHz
[ 1.972095] usb 7-5: new full-speed USB device number 3 using ohci-pci
[ 2.143199] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:13.0/usb7/7-5/7-5:1.0/0003:1532:0016.0006/input/input3
[ 2.143245] hid-generic 0003:1532:0016.0006: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:13.0-5/input0
[ 2.345643] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.564353] random: nonblocking pool is initialized
[ 2.896115] Switched to clocksource tsc
[ 2.989972] systemd[1]: RTC configured in localtime, applying delta of -420 minutes to system time.
[ 4.146364] EXT4-fs (sdc2): re-mounted. Opts: data=ordered
[ 5.242062] systemd-journald[198]: Received request to flush runtime journal from PID 1
[ 5.820530] ACPI: acpi_idle registered with cpuidle
[ 5.827968] acpi-cpufreq: overriding BIOS provided _PSD data
[ 6.088745] MCE: In-kernel MCE decoding enabled.
[ 6.088830] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 6.088835] ACPI: Power Button [PWRB]
[ 6.088901] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 6.088903] ACPI: Power Button [PWRF]
[ 6.090720] wmi: Mapper loaded
[ 6.183901] EDAC MC: Ver: 3.0.0
[ 6.185457] AMD64 EDAC driver v3.4.0
[ 6.185490] EDAC amd64: DRAM ECC disabled.
[ 6.185502] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 6.196328] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.252091] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 6.252149] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 6.309452] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.309546] r8169 0000:04:06.0 (unnamed net_device) (uninitialized): not PCI Express
[ 6.309823] r8169 0000:04:06.0 eth0: RTL8169sb/8110sb at 0xffffc90000648000, d8:eb:97:81:7b:88, XID 10000000 IRQ 20
[ 6.309826] r8169 0000:04:06.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[ 6.316117] [drm] Initialized drm 1.1.0 20060810
[ 6.322842] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 6.322904] sp5100_tco: PCI Revision ID: 0x42
[ 6.322936] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 6.322947] sp5100_tco: Last reboot was not triggered by watchdog.
[ 6.322994] sp5100_tco: initialized (0xffffc9000064ab00). heartbeat=60 sec (nowayout=0)
[ 6.370784] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 6.405509] r8169 0000:04:06.0 enp4s6: renamed from eth0
[ 6.666521] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 6.666531] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 6.728492] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 6.728504] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.728512] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 6.728518] sound hdaudioC0D0: mono: mono_out=0x0
[ 6.728523] sound hdaudioC0D0: dig-out=0x11/0x1e
[ 6.728528] sound hdaudioC0D0: inputs:
[ 6.728534] sound hdaudioC0D0: Front Mic=0x19
[ 6.728540] sound hdaudioC0D0: Rear Mic=0x18
[ 6.728545] sound hdaudioC0D0: Line=0x1a
[ 6.732452] AVX version of gcm_enc/dec engaged.
[ 6.732455] AES CTR mode by8 optimization enabled
[ 6.751090] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 6.751373] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 6.751805] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 6.752652] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 6.752768] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 6.752834] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 6.752899] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 6.752956] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 7.043010] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[ 7.043204] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
[ 7.043899] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
[ 7.094444] Adding 16777212k swap on /dev/sdc3. Priority:-1 extents:1 across:16777212k FS
[ 7.117737] usbcore: registered new interface driver snd-usb-audio
[ 7.126713] nvidia: module license 'NVIDIA' taints kernel.
[ 7.126718] Disabling lock debugging due to kernel taint
[ 7.138096] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 7.138428] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[ 7.138435] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 346.47 Thu Feb 19 18:56:03 PST 2015
[ 7.485021] input: Logitech K400 as /devices/pci0000:00/0000:00:13.0/usb7/7-4/7-4:1.2/0003:046D:C52B.0004/0003:046D:4024.0005/input/input18
[ 7.485233] logitech-hidpp-device 0003:046D:4024.0005: input,hidraw3: USB HID v1.11 Keyboard [Logitech K400] on usb-0000:00:13.0-4:1
[ 7.540890] mousedev: PS/2 mouse device common for all mice
[ 7.683577] kvm: Nested Virtualization enabled
[ 7.683587] kvm: Nested Paging enabled
[ 8.915498] EXT4-fs (sdc4): mounted filesystem with ordered data mode. Opts: data=ordered
[ 8.970005] microcode: CPU0: new patch_level=0x06000832
[ 8.988739] microcode: CPU2: new patch_level=0x06000832
[ 8.994855] microcode: CPU4: new patch_level=0x06000832
[ 9.013677] microcode: CPU6: new patch_level=0x06000832
[ 9.123268] it87: Found IT8728F chip at 0x228, revision 1
[ 9.123288] it87: Beeping is supported
[ 10.039941] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:13.0/usb7/7-5/7-5:1.0/0003:1532:0016.0007/input/input19
[ 10.040305] hid-generic 0003:1532:0016.0007: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:13.0-5/input0
[ 10.361662] r8169 0000:04:06.0 enp4s6: link down
[ 10.361761] r8169 0000:04:06.0 enp4s6: link down
[ 10.701964] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.041655] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:13.0/usb7/7-5/7-5:1.0/0003:1532:0016.0008/input/input20
[ 11.042019] hid-generic 0003:1532:0016.0008: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:13.0-5/input0
[ 12.042896] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:13.0/usb7/7-5/7-5:1.0/0003:1532:0016.0009/input/input21
[ 12.043111] hid-generic 0003:1532:0016.0009: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:13.0-5/input0
[ 13.308991] NVRM: Your system is not currently configured to drive a VGA console
[ 13.308995] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 13.308996] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 13.308998] NVRM: drivers including, but not limited to, vesafb, may result in
[ 13.308999] NVRM: corruption and stability problems, and is not supported.
[ 13.823977] r8169 0000:04:06.0 enp4s6: link up
I figure there is plenty of unnecessary info in the dmesg and I apologize, but I want to find the problem of this illusive RAM.
My system specs:
AMD FX-8350
4x4gb CMZ8GX3M2A160 Corsair RAM
Gigabyte GA-990FXA-UD3
NVidia GT 640
Please can someone guide me to the answer of the missing RAM?
Last edited by vuvffufg (2015-04-02 18:37:31)Yes it is 64bit:
[vuvffufg@HereAndNow-Main ~]$ uname -a
Linux HereAndNow-Main 3.19.2-1-ARCH #1 SMP PREEMPT Wed Mar 18 16:21:02 CET 2015 x86_64 GNU/Linux -
Hi,
I have a strange problem. After some time of running archlinux the root filesystem suddenly becomes read-only. It happened 3 times yet. I'm using LVM and the root volume is /dev/mapper/VG0-archlinux2 and filesystem type is reiserfs.
If i tried to remount it read-write using command
mount -o remount,rw /
i got this:
sudo: unable to open /var/db/sudo/uiii/3: Read-only file system
mount: /dev/mapper/VG0-archlinux2: can't read superblock
Only reboot helps.
my machine is (uname -a):
Linux uiii-arch 3.5.4-1-ARCH #1 SMP PREEMPT Sat Sep 15 08:12:04 CEST 2012 x86_64 GNU/Linux
/etc/mtab (when problem occured):
rootfs / rootfs rw 0 0
proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
sys /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
dev /dev devtmpfs rw,nosuid,relatime,size=1990100k,nr_inodes=497525,mode=755 0 0
run /run tmpfs rw,nosuid,nodev,relatime,mode=755 0 0
/dev/mapper/VG0-archlinux2 / reiserfs ro,relatime 0 0
devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0
shm /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0
tmpfs /tmp tmpfs rw,nosuid,nodev,relatime 0 0
/dev/sda1 /boot ext2 rw,relatime 0 0
/dev/mapper/VG0-uloziste /mnt/uloziste ext4 rw,relatime,data=ordered 0 0
binfmt /proc/sys/fs/binfmt_misc binfmt_misc rw,relatime 0 0
gvfs-fuse-daemon /home/uiii/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=1000,group_id=100 0 0
dmesg output is this:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.4-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 20120721 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Sep 15 08:12:04 CEST 2012
[ 0.000000] Command line: root=/dev/mapper/VG0-archlinux2 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfedffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfee2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfee3000-0x00000000cfeeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA790X-UD4/GA-MA790X-UD4, BIOS F3 06/03/2009
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000CFF00000 mask FFFFFFF00000 uncachable
[ 0.000000] 4 base 000100000000 mask FFFFE0000000 write-back
[ 0.000000] 5 base 000120000000 mask FFFFF0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f5600-0x000f560f] mapped at [ffff8800000f5600]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xcfedffff]
[ 0.000000] [mem 0x00000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xcfdfffff] page 2M
[ 0.000000] [mem 0xcfe00000-0xcfedffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xcfedffff @ [mem 0x1f9fd000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x12fffffff]
[ 0.000000] [mem 0x100000000-0x12fffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x12fffffff @ [mem 0xcfede000-0xcfedffff]
[ 0.000000] RAMDISK: [mem 0x7fc62000-0x7fffefff]
[ 0.000000] ACPI: RSDP 00000000000f7010 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000cfee3000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000cfee3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000cfee30c0 05980 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000cfee0000 00040
[ 0.000000] ACPI: SSDT 00000000cfee8b00 008F5 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 00000000cfee9400 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000cfee9440 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: TAMG 00000000cfee9480 0030A (v01 GBT GBT B0 5455312E BG?? 53450101)
[ 0.000000] ACPI: APIC 00000000cfee8a40 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x12fffffff]
[ 0.000000] NODE_DATA [mem 0x12fffc000-0x12fffffff]
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x12fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xcfedffff]
[ 0.000000] node 0: [mem 0x100000000-0x12fffffff]
[ 0.000000] On node 0 totalpages: 1048175
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 831264 pages, LIFO batch:31
[ 0.000000] Normal zone: 3072 pages used for memmap
[ 0.000000] Normal zone: 193536 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee3000
[ 0.000000] PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000
[ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s83392 r8192 d23104 u524288
[ 0.000000] pcpu-alloc: s83392 r8192 d23104 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028713
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/mapper/VG0-archlinux2 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ c4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 3980204k/4980736k available (4645k kernel code, 788036k absent, 212496k reserved, 4207k data, 760k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.003333] Fast TSC calibration using PIT
[ 0.006666] Detected 2813.035 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5628.48 BogoMIPS (lpj=9376783)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000027] Security Framework initialized
[ 0.000031] AppArmor: AppArmor disabled by boot time parameter
[ 0.000260] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001554] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.002140] Mount-cache hash table entries: 256
[ 0.002315] Initializing cgroup subsys cpuacct
[ 0.002317] Initializing cgroup subsys memory
[ 0.002326] Initializing cgroup subsys devices
[ 0.002327] Initializing cgroup subsys freezer
[ 0.002328] Initializing cgroup subsys net_cls
[ 0.002330] Initializing cgroup subsys blkio
[ 0.002349] tseg: 00cff00000
[ 0.002351] CPU: Physical Processor ID: 0
[ 0.002352] CPU: Processor Core ID: 0
[ 0.002353] mce: CPU supports 6 MCE banks
[ 0.002358] LVT offset 0 assigned for vector 0xf9
[ 0.002362] using AMD E400 aware idle routine
[ 0.002998] ACPI: Core revision 20120320
[ 0.019730] ftrace: allocating 17970 entries in 71 pages
[ 0.027072] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.060076] CPU0: AMD Phenom(tm) II X3 720 Processor stepping 02
[ 0.165799] Performance Events: AMD PMU driver.
[ 0.165802] ... version: 0
[ 0.165803] ... bit width: 48
[ 0.165803] ... generic registers: 4
[ 0.165804] ... value mask: 0000ffffffffffff
[ 0.165805] ... max period: 00007fffffffffff
[ 0.165806] ... fixed-purpose events: 0
[ 0.165807] ... event mask: 000000000000000f
[ 0.185858] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.199154] Booting Node 0, Processors #1 #2
[ 0.235675] Brought up 3 CPUs
[ 0.235679] Total of 3 processors activated (16884.46 BogoMIPS).
[ 0.239344] devtmpfs: initialized
[ 0.240745] PM: Registering ACPI NVS region [mem 0xcfee0000-0xcfee2fff] (12288 bytes)
[ 0.241490] NET: Registered protocol family 16
[ 0.241574] node 0 link 0: io port [c000, ffff]
[ 0.241576] TOM: 00000000d0000000 aka 3328M
[ 0.241578] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
[ 0.241580] node 0 link 0: mmio [a0000, bffff]
[ 0.241582] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.241584] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.241586] node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff]
[ 0.241588] TOM2: 0000000130000000 aka 4864M
[ 0.241589] bus: [00, 03] on node 0 link 0
[ 0.241590] bus: 00 [io 0x0000-0xffff]
[ 0.241591] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.241592] bus: 00 [mem 0xd0000000-0xdfffffff]
[ 0.241593] bus: 00 [mem 0xe0400000-0xffffffff]
[ 0.241594] bus: 00 [mem 0xe0100000-0xe03fffff]
[ 0.241595] bus: 00 [mem 0x130000000-0xfcffffffff]
[ 0.241649] ACPI: bus type pci registered
[ 0.241696] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.241698] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.252350] PCI: Using configuration type 1 for base access
[ 0.252819] bio: create slab <bio-0> at 0
[ 0.252870] ACPI: Added _OSI(Module Device)
[ 0.252871] ACPI: Added _OSI(Processor Device)
[ 0.252872] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.252873] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.253366] ACPI: EC: Look up EC in DSDT
[ 0.258796] ACPI: Interpreter enabled
[ 0.258802] ACPI: (supports S0 S3 S4 S5)
[ 0.258819] ACPI: Using IOAPIC for interrupt routing
[ 0.261632] ACPI: No dock devices found.
[ 0.261636] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.261677] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.261731] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.261733] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.261735] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.261737] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.261738] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
[ 0.261768] PCI host bridge to bus 0000:00
[ 0.261770] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.261772] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.261773] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.261775] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.261777] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff]
[ 0.261786] pci 0000:00:00.0: [1002:5958] type 00 class 0x060000
[ 0.261797] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.261830] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
[ 0.261858] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.261878] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
[ 0.261906] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.261931] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[ 0.261949] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
[ 0.261958] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
[ 0.261967] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
[ 0.261976] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.261985] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.261994] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.262013] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.262058] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.262070] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 0.262132] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[ 0.262145] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 0.262212] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.262230] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
[ 0.262309] pci 0000:00:12.2: supports D1 D2
[ 0.262311] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.262334] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.262346] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
[ 0.262408] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[ 0.262421] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.262493] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.262511] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
[ 0.262590] pci 0000:00:13.2: supports D1 D2
[ 0.262591] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.262616] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.262711] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.262726] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.262735] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.262744] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.262753] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.262762] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
[ 0.262817] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.262837] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.262901] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.262915] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.262987] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.263028] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.263041] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
[ 0.263105] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.263119] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.263130] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.263141] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.263155] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.263201] pci 0000:01:00.0: [10de:05e2] type 00 class 0x030000
[ 0.263210] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.263219] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.263229] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.263235] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f]
[ 0.263242] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.269149] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.269155] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.269157] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.269161] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.269200] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.269213] pci 0000:02:00.0: reg 10: [io 0xde00-0xdeff]
[ 0.269232] pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.269245] pci 0000:02:00.0: reg 20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
[ 0.269253] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.269300] pci 0000:02:00.0: supports D1 D2
[ 0.269301] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.275814] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.275820] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.275822] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.275825] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.275865] pci 0000:03:07.0: [168c:001a] type 00 class 0x020000
[ 0.275887] pci 0000:03:07.0: reg 10: [mem 0xfdee0000-0xfdeeffff]
[ 0.276014] pci 0000:03:0e.0: [104c:8024] type 00 class 0x0c0010
[ 0.276035] pci 0000:03:0e.0: reg 10: [mem 0xfdeff000-0xfdeff7ff]
[ 0.276047] pci 0000:03:0e.0: reg 14: [mem 0xfdef8000-0xfdefbfff]
[ 0.276136] pci 0000:03:0e.0: supports D1 D2
[ 0.276138] pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.276174] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.276177] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.276181] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.276185] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
[ 0.276186] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.276188] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.276190] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.276191] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.276193] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
[ 0.276205] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.276360] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.276399] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.276426] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.276447] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.276449] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.276450] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.282962] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.282993] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.283022] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.283049] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.283077] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.283104] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.283131] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.283158] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.283250] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.283252] vgaarb: loaded
[ 0.283253] vgaarb: bridge control possible 0000:01:00.0
[ 0.283281] PCI: Using ACPI for IRQ routing
[ 0.291632] PCI: pci_cache_line_size set to 64 bytes
[ 0.291638] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[ 0.291701] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.291703] e820: reserve RAM buffer [mem 0xcfee0000-0xcfffffff]
[ 0.291778] NetLabel: Initializing
[ 0.291779] NetLabel: domain hash size = 128
[ 0.291780] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.291789] NetLabel: unlabeled traffic allowed by default
[ 0.291804] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.291807] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.293841] Switching to clocksource hpet
[ 0.298189] pnp: PnP ACPI init
[ 0.298200] ACPI: bus type pnp registered
[ 0.298257] pnp 00:00: [bus 00-ff]
[ 0.298260] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.298262] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.298264] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.298265] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.298267] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.298268] pnp 00:00: [mem 0xd0000000-0xfebfffff window]
[ 0.298295] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.298303] pnp 00:01: [io 0x0010-0x001f]
[ 0.298304] pnp 00:01: [io 0x0022-0x003f]
[ 0.298306] pnp 00:01: [io 0x0044-0x005f]
[ 0.298307] pnp 00:01: [io 0x0062-0x0063]
[ 0.298308] pnp 00:01: [io 0x0065-0x006f]
[ 0.298310] pnp 00:01: [io 0x0074-0x007f]
[ 0.298311] pnp 00:01: [io 0x0091-0x0093]
[ 0.298312] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.298313] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.298315] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.298316] pnp 00:01: [io 0x0220-0x0225]
[ 0.298317] pnp 00:01: [io 0x0290-0x0294]
[ 0.298353] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.298355] system 00:01: [io 0x0220-0x0225] has been reserved
[ 0.298356] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.298359] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.298785] pnp 00:02: [io 0x4100-0x411f]
[ 0.298789] pnp 00:02: [io 0x0228-0x022f]
[ 0.298791] pnp 00:02: [io 0x040b]
[ 0.298792] pnp 00:02: [io 0x04d6]
[ 0.298793] pnp 00:02: [io 0x0c00-0x0c01]
[ 0.298794] pnp 00:02: [io 0x0c14]
[ 0.298796] pnp 00:02: [io 0x0c50-0x0c52]
[ 0.298797] pnp 00:02: [io 0x0c6c-0x0c6d]
[ 0.298798] pnp 00:02: [io 0x0c6f]
[ 0.298799] pnp 00:02: [io 0x0cd0-0x0cd1]
[ 0.298801] pnp 00:02: [io 0x0cd2-0x0cd3]
[ 0.298802] pnp 00:02: [io 0x0cd4-0x0cdf]
[ 0.298803] pnp 00:02: [io 0x4000-0x40fe]
[ 0.298804] pnp 00:02: [io 0x4210-0x4217]
[ 0.298806] pnp 00:02: [io 0x0b00-0x0b0f]
[ 0.298807] pnp 00:02: [io 0x0b10-0x0b1f]
[ 0.298808] pnp 00:02: [io 0x0b20-0x0b3f]
[ 0.298810] pnp 00:02: [mem 0x00000000-0x00000fff window]
[ 0.298812] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
[ 0.298818] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.298844] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
[ 0.298848] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
[ 0.298885] system 00:02: [io 0x4100-0x411f] has been reserved
[ 0.298887] system 00:02: [io 0x0228-0x022f] has been reserved
[ 0.298889] system 00:02: [io 0x040b] has been reserved
[ 0.298891] system 00:02: [io 0x04d6] has been reserved
[ 0.298892] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 0.298894] system 00:02: [io 0x0c14] has been reserved
[ 0.298896] system 00:02: [io 0x0c50-0x0c52] has been reserved
[ 0.298897] system 00:02: [io 0x0c6c-0x0c6d] has been reserved
[ 0.298899] system 00:02: [io 0x0c6f] has been reserved
[ 0.298900] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 0.298902] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 0.298904] system 00:02: [io 0x0cd4-0x0cdf] has been reserved
[ 0.298905] system 00:02: [io 0x4000-0x40fe] has been reserved
[ 0.298907] system 00:02: [io 0x4210-0x4217] has been reserved
[ 0.298908] system 00:02: [io 0x0b00-0x0b0f] has been reserved
[ 0.298910] system 00:02: [io 0x0b10-0x0b1f] has been reserved
[ 0.298912] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 0.298914] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.298917] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.298986] pnp 00:03: [dma 4]
[ 0.298988] pnp 00:03: [io 0x0000-0x000f]
[ 0.298989] pnp 00:03: [io 0x0080-0x0090]
[ 0.298991] pnp 00:03: [io 0x0094-0x009f]
[ 0.298992] pnp 00:03: [io 0x00c0-0x00df]
[ 0.299014] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.299038] pnp 00:04: [irq 0 disabled]
[ 0.299049] pnp 00:04: [irq 8]
[ 0.299051] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.299070] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.299088] pnp 00:05: [io 0x0070-0x0073]
[ 0.299108] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.299114] pnp 00:06: [io 0x0061]
[ 0.299134] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.299140] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.299147] pnp 00:07: [irq 13]
[ 0.299167] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.299271] pnp 00:08: [io 0x03f0-0x03f5]
[ 0.299272] pnp 00:08: [io 0x03f7]
[ 0.299279] pnp 00:08: [irq 6]
[ 0.299281] pnp 00:08: [dma 2]
[ 0.299312] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.299438] pnp 00:09: [io 0x03f8-0x03ff]
[ 0.299445] pnp 00:09: [irq 4]
[ 0.299485] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.299507] pnp 00:0a: [io 0x0060]
[ 0.299509] pnp 00:0a: [io 0x0064]
[ 0.299516] pnp 00:0a: [irq 1]
[ 0.299543] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.299562] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.299596] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.299598] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.299674] pnp 00:0c: [mem 0x000cda00-0x000cffff]
[ 0.299675] pnp 00:0c: [mem 0x000f0000-0x000f7fff]
[ 0.299677] pnp 00:0c: [mem 0x000f8000-0x000fbfff]
[ 0.299678] pnp 00:0c: [mem 0x000fc000-0x000fffff]
[ 0.299680] pnp 00:0c: [mem 0xcfee0000-0xcfefffff]
[ 0.299681] pnp 00:0c: [mem 0xffff0000-0xffffffff]
[ 0.299682] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.299684] pnp 00:0c: [mem 0x00100000-0xcfedffff]
[ 0.299685] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[ 0.299687] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[ 0.299688] pnp 00:0c: [mem 0xfff80000-0xfffeffff]
[ 0.299692] pnp 00:0c: disabling [mem 0x000cda00-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.299694] pnp 00:0c: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.299696] pnp 00:0c: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.299698] pnp 00:0c: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.299701] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.299703] pnp 00:0c: disabling [mem 0x00100000-0xcfedffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.299745] system 00:0c: [mem 0xcfee0000-0xcfefffff] could not be reserved
[ 0.299747] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.299749] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.299750] system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.299752] system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.299755] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.299768] pnp: PnP ACPI: found 13 devices
[ 0.299769] ACPI: ACPI bus type pnp unregistered
[ 0.306130] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb07ffff pref]
[ 0.306133] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.306135] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.306138] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.306140] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.306144] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf0ffff pref]
[ 0.306145] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.306147] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.306149] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.306152] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.306155] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.306157] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.306162] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.306165] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
[ 0.306191] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.306193] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.306195] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.306197] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.306198] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
[ 0.306200] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.306202] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.306203] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.306205] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.306207] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.306209] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.306210] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.306212] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.306214] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff pref]
[ 0.306215] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.306217] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.306219] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.306220] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.306222] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xfebfffff]
[ 0.306249] NET: Registered protocol family 2
[ 0.306336] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.307016] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.309549] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.309858] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.309859] TCP: reno registered
[ 0.309868] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.309895] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.309974] NET: Registered protocol family 1
[ 0.710572] pci 0000:01:00.0: Boot video device
[ 0.710585] PCI: CLS 4 bytes, default 64
[ 0.710637] Unpacking initramfs...
[ 0.774193] Freeing initrd memory: 3700k freed
[ 0.776235] PCI-DMA: Disabling AGP.
[ 0.776306] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 0.776307] PCI-DMA: using GART IOMMU.
[ 0.776309] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.779581] LVT offset 1 assigned for vector 0x400
[ 0.779589] IBS: LVT offset 1 assigned
[ 0.779613] perf: AMD IBS detected (0x0000001f)
[ 0.779743] audit: initializing netlink socket (disabled)
[ 0.779753] type=2000 audit(1348861535.663:1): initialized
[ 0.789269] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.790783] VFS: Disk quotas dquot_6.5.2
[ 0.790820] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.790894] msgmni has been set to 7909
[ 0.791048] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.791075] io scheduler noop registered
[ 0.791076] io scheduler deadline registered
[ 0.791112] io scheduler cfq registered (default)
[ 0.791228] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.791319] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 0.791449] GHES: HEST is not enabled!
[ 0.791503] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.812101] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.832955] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.833141] Linux agpgart interface v0.103
[ 0.833180] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.833181] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.833304] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.833378] mousedev: PS/2 mouse device common for all mice
[ 0.833425] rtc_cmos 00:05: RTC can wake from S4
[ 0.833539] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.833571] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.833577] cpuidle: using governor ladder
[ 0.833578] cpuidle: using governor menu
[ 0.833689] drop_monitor: Initializing network drop monitor service
[ 0.833749] TCP: cubic registered
[ 0.833835] NET: Registered protocol family 10
[ 0.833965] NET: Registered protocol family 17
[ 0.833973] Key type dns_resolver registered
[ 0.834070] PM: Hibernation image not present or could not be loaded.
[ 0.834076] registered taskstats version 1
[ 0.834539] rtc_cmos 00:05: setting system clock to 2012-09-28 19:45:35 UTC (1348861535)
[ 0.835479] Freeing unused kernel memory: 760k freed
[ 0.835631] Write protecting the kernel read-only data: 8192k
[ 0.839453] Freeing unused kernel memory: 1488k freed
[ 0.841313] Freeing unused kernel memory: 612k freed
[ 0.848497] systemd-udevd[70]: starting version 189
[ 0.851135] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.861403] Floppy drive(s): fd0 is 1.44M
[ 0.868797] ACPI: bus type usb registered
[ 0.868817] usbcore: registered new interface driver usbfs
[ 0.868825] usbcore: registered new interface driver hub
[ 0.868995] usbcore: registered new device driver usb
[ 0.869288] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.869717] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 0.869754] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.869763] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.869785] QUIRK: Enable AMD PLL fix
[ 0.869787] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[ 0.869799] ehci_hcd 0000:00:12.2: debug port 1
[ 0.869827] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
[ 0.871224] SCSI subsystem initialized
[ 0.872843] libata version 3.00 loaded.
[ 0.874245] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.877166] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.877278] hub 1-0:1.0: USB hub found
[ 0.877281] hub 1-0:1.0: 6 ports detected
[ 0.878035] FDC 0 is a post-1991 82077
[ 0.878198] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.878204] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.878211] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.878223] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[ 0.878238] ehci_hcd 0000:00:13.2: debug port 1
[ 0.878264] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
[ 0.887161] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.887266] hub 2-0:1.0: USB hub found
[ 0.887269] hub 2-0:1.0: 6 ports detected
[ 0.887719] ahci 0000:00:11.0: version 3.0
[ 0.887841] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 0.887844] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 0.888332] scsi0 : ahci
[ 0.888396] scsi1 : ahci
[ 0.888447] scsi2 : ahci
[ 0.888494] scsi3 : ahci
[ 0.888576] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 0.888578] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 0.888580] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 0.888583] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 0.888675] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.888681] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 0.888719] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
[ 0.944618] hub 3-0:1.0: USB hub found
[ 0.944624] hub 3-0:1.0: 3 ports detected
[ 0.944916] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 0.944922] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 0.944936] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
[ 1.001279] hub 4-0:1.0: USB hub found
[ 1.001285] hub 4-0:1.0: 3 ports detected
[ 1.001404] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.001409] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.001435] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
[ 1.057932] hub 5-0:1.0: USB hub found
[ 1.057938] hub 5-0:1.0: 3 ports detected
[ 1.058071] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.058076] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.058089] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
[ 1.114589] hub 6-0:1.0: USB hub found
[ 1.114595] hub 6-0:1.0: 3 ports detected
[ 1.114705] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.114710] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.114723] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
[ 1.171271] hub 7-0:1.0: USB hub found
[ 1.171277] hub 7-0:1.0: 2 ports detected
[ 1.207184] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.207225] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.300449] usb 2-4: new high-speed USB device number 3 using ehci_hcd
[ 1.373774] ata2: softreset failed (device not ready)
[ 1.373843] ata2: applying PMP SRST workaround and retrying
[ 1.373866] ata1: softreset failed (device not ready)
[ 1.373934] ata1: applying PMP SRST workaround and retrying
[ 1.425928] hub 2-4:1.0: USB hub found
[ 1.426276] hub 2-4:1.0: 4 ports detected
[ 1.540428] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.540459] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.541221] ata1.00: ATA-8: WDC WD3200AAKS-75L9A0, 01.03E01, max UDMA/133
[ 1.541224] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.542034] ata1.00: configured for UDMA/133
[ 1.542185] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAKS-7 01.0 PQ: 0 ANSI: 5
[ 1.552905] ata2.00: ATAPI: LITE-ON DVDRW LH-20A1L, BL05, max UDMA/100
[ 1.565919] ata2.00: configured for UDMA/100
[ 1.567862] scsi 1:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1L BL05 PQ: 0 ANSI: 5
[ 1.570090] scsi4 : pata_atiixp
[ 1.570937] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.570968] sd 0:0:0:0: [sda] Write Protect is off
[ 1.570970] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.570992] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.571032] scsi5 : pata_atiixp
[ 1.571566] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 1.571568] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 1.574704] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.574707] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.574836] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.583928] sda: sda1 sda2 sda3 sda4
[ 1.584257] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.677054] usb 5-3: new full-speed USB device number 2 using ohci_hcd
[ 1.780379] Refined TSC clocksource calibration: 2812.808 MHz.
[ 1.780391] Switching to clocksource tsc
[ 1.850813] usbcore: registered new interface driver usbhid
[ 1.850814] usbhid: USB HID core driver
[ 1.851297] input: HID 1d57:0005 as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/input/input1
[ 1.851380] hid-generic 0003:1D57:0005.0001: input,hidraw0: USB HID v1.10 Mouse [HID 1d57:0005] on usb-0000:00:13.0-3/input0
[ 1.914434] usb 2-4.4: new high-speed USB device number 4 using ehci_hcd
[ 1.925431] device-mapper: uevent: version 1.0.3
[ 1.925535] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[ 2.294145] REISERFS (device dm-3): found reiserfs format "3.6" with standard journal
[ 2.294160] REISERFS (device dm-3): using ordered data mode
[ 2.294161] reiserfs: using flush barriers
[ 2.294331] REISERFS (device dm-3): journal params: device dm-3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 2.294793] REISERFS (device dm-3): checking transaction log (dm-3)
[ 2.328438] REISERFS (device dm-3): Using r5 hash to sort names
[ 3.521243] systemd-udevd[196]: starting version 192
[ 3.731543] vboxdrv: Found 3 processor cores.
[ 3.731692] vboxdrv: fAsync=0 offMin=0x421 offMax=0x19b7
[ 3.731735] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 3.731736] vboxdrv: Successfully loaded version 4.2.0_OSE (interface 0x001a0004).
[ 4.078334] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 4.078340] ACPI: Power Button [PWRB]
[ 4.078389] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.078391] ACPI: Power Button [PWRF]
[ 4.118249] wmi: Mapper loaded
[ 4.264495] sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
[ 4.264551] sp5100_tco: mmio address 0xfec000f0 already in use
[ 4.266129] EDAC MC: Ver: 2.1.0
[ 4.308369] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input4
[ 4.326814] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 4.326881] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 4.326938] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 4.326984] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 4.327034] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 4.327093] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 4.327137] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 4.327181] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 4.331081] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[ 4.331239] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20120320/utaddress-251)
[ 4.331244] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.370081] firewire_ohci 0000:03:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 4.370182] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.370266] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[ 4.370532] r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xffffc90000656000, 00:24:1d:14:eb:1c, XID 1c4000c0 IRQ 42
[ 4.370534] r8169 0000:02:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 4.460371] MCE: In-kernel MCE decoding enabled.
[ 4.461269] AMD64 EDAC driver v3.4.0
[ 4.461326] EDAC amd64: DRAM ECC disabled.
[ 4.461332] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 4.681980] cfg80211: Calling CRDA to update world regulatory domain
[ 4.870047] firewire_core 0000:03:0e.0: created device fw0: GUID 0019f1ec0000241d, S400
[ 4.906613] ath5k 0000:03:07.0: registered as 'phy0'
[ 5.157960] kvm: Nested Virtualization enabled
[ 5.157964] kvm: Nested Paging enabled
[ 5.212068] powernow-k8: Found 1 AMD Phenom(tm) II X3 720 Processor (3 cpu cores) (version 2.20.00)
[ 5.212100] powernow-k8: 0 : pstate 0 (2800 MHz)
[ 5.212101] powernow-k8: 1 : pstate 1 (2100 MHz)
[ 5.212102] powernow-k8: 2 : pstate 2 (1600 MHz)
[ 5.212103] powernow-k8: 3 : pstate 3 (800 MHz)
[ 5.445767] microcode: CPU0: patch_level=0x01000086
[ 5.513053] ath: EEPROM regdomain: 0x809c
[ 5.513060] ath: EEPROM indicates we should expect a country code
[ 5.513064] ath: doing EEPROM country->regdmn map search
[ 5.513067] ath: country maps to regdmn code: 0x52
[ 5.513070] ath: Country alpha2 being used: CN
[ 5.513073] ath: Regpair used: 0x52
[ 5.720324] microcode: failed to load file amd-ucode/microcode_amd.bin
[ 5.720419] microcode: CPU1: patch_level=0x01000086
[ 5.721269] microcode: failed to load file amd-ucode/microcode_amd.bin
[ 5.721373] microcode: CPU2: patch_level=0x01000086
[ 5.722356] microcode: failed to load file amd-ucode/microcode_amd.bin
[ 5.722563] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 5.801835] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 5.802304] ath5k: phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
[ 6.296710] nvidia: module license 'NVIDIA' taints kernel.
[ 6.296714] Disabling lock debugging due to kernel taint
[ 6.309419] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 6.309823] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.51 Tue Sep 18 17:16:56 PDT 2012
[ 6.321474] Linux media interface: v0.10
[ 6.384863] Linux video capture interface: v2.00
[ 6.452628] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0808)
[ 6.469190] input: UVC Camera (046d:0808) as /devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4.4/2-4.4:1.0/input/input13
[ 6.469404] usbcore: registered new interface driver uvcvideo
[ 6.469407] USB Video Class driver (1.1.1)
[ 7.020908] usbcore: registered new interface driver snd-usb-audio
[ 7.051400] set resolution quirk: cval->res = 384
[ 8.232297] reiserfs: enabling write barrier flush mode
[ 8.511269] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 8.515067] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 8.556782] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 10.739934] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 11.452652] wlan0: authenticate with 00:1f:c6:3d:84:ba
[ 11.461052] wlan0: send auth to 00:1f:c6:3d:84:ba (try 1/3)
[ 11.462516] wlan0: authenticated
[ 11.469067] wlan0: associate with 00:1f:c6:3d:84:ba (try 1/3)
[ 11.470817] wlan0: RX AssocResp from 00:1f:c6:3d:84:ba (capab=0x401 status=0 aid=3)
[ 11.471130] wlan0: associated
[ 11.471521] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 24.567793] NVRM: GPU at 0000:01:00: GPU-ac314c58-0b61-fb24-fa28-bac76d8e581b
[ 27.419761] fuse init (API version 7.19)
[ 31.119563] EXT4-fs (dm-2): re-mounted. Opts: commit=0
[ 2088.845650] ata1.00: exception Emask 0x50 SAct 0x78000ffc SErr 0x400800 action 0x6 frozen
[ 2088.845660] ata1.00: irq_stat 0x08000000, interface fatal error
[ 2088.845667] ata1: SError: { HostInt Handshk }
[ 2088.845674] ata1.00: failed command: WRITE FPDMA QUEUED
[ 2088.845687] ata1.00: cmd 61/08:10:97:ae:07/00:00:1a:00:00/40 tag 2 ncq 4096 out
res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
[ 2088.845694] ata1.00: status: { DRDY }
[ 2088.845699] ata1.00: failed command: WRITE FPDMA QUEUED
[ 2088.845711] ata1.00: cmd 61/08:18:b7:ae:07/00:00:1a:00:00/40 tag 3 ncq 4096 out
res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
[ 2088.845716] ata1.00: status: { DRDY }
[ 2088.845721] ata1.00: failed command: WRITE FPDMA QUEUED
[ 2088.845732] ata1.00: cmd 61/20:20:bf:ae:07/00:00:1a:00:00/40 tag 4 ncq 16384 out
res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
[ 2088.845737] ata1.00: status: { DRDY }
[ 2088.845742] ata1.00: failed command: WRITE FPDMA QUEUED
[ 2088.845753] ata1.00: cmd 61/c8:28:df:ae:07/00:00:1a:00:00/40 tag 5 ncq 102400 out
res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
[ 2088.845758] ata1.00: status: { DRDY }
[ 2088.845763] ata1.00: failed command: WRITE FPDMA QUEUED
[ 2088.845774] ata1.00: cmd 61/90:30:a7:af:07/00:00:1a:00:00/40 tag 6 ncq 73728 out
res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
[ 2088.845779] ata1.00: status: { DRDY }
[ 2088.845783] ata1.00: failed command: WRITE FPDMA QUEUED
[ 2088.845795] ata1.00: cmd 61/b8:38:37:b0:07/00:00:1a:00:00/40 tag 7 ncq 94208 out
res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
[ 2088.845800] ata1.00: status: { DRDY }
[ 2088.845804] ata1.00: failed command: WRITE FPDMA QUEUED
[ 2088.845815] ata1.00: cmd 61/a8:40:ef:b0:07/00:00:1a:00:00/40 tag 8 ncq 86016 out
res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
[ 2088.845820] ata1.00: status: { DRDY }
[ 2088.845825] ata1.00: failed command: WRITE FPDMA QUEUED
[ 2088.845836] ata1.00: cmd 61/80:48:97:b1:07/00:00:1a:00:00/40 tag 9 ncq 65536 out
res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
[ 2088.845841] ata1.00: status: { DRDY }
[ 2088.845845] ata1.00: failed command: WRITE FPDMA QUEUED
[ 2088.845857] ata1.00: cmd 61/b0:50:17:b2:07/00:00:1a:00:00/40 tag 10 ncq 90112 out
res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
[ 2088.845862] ata1.00: status: { DRDY }
[ 2088.845867] ata1.00: failed command: WRITE FPDMA QUEUED
[ 2088.845878] ata1.00: cmd 61/d8:58:c7:b2:07/00:00:1a:00:00/40 tag 11 ncq 110592 out
res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
[ 2088.845883] ata1.00: status: { DRDY }
[ 2088.845889] ata1.00: failed command: WRITE FPDMA QUEUED
[ 2088.845900] ata1.00: cmd 61/08:d8:8f:ae:07/00:00:1a:00:00/40 tag 27 ncq 4096 out
res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
[ 2088.845905] ata1.00: status: { DRDY }
[ 2088.845910] ata1.00: failed command: WRITE FPDMA QUEUED
[ 2088.845922] ata1.00: cmd 61/08:e0:9f:ae:07/00:00:1a:00:00/40 tag 28 ncq 4096 out
res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
[ 2088.845927] ata1.00: status: { DRDY }
[ 2088.845931] ata1.00: failed command: WRITE FPDMA QUEUED
[ 2088.845942] ata1.00: cmd 61/08:e8:a7:ae:07/00:00:1a:00:00/40 tag 29 ncq 4096 out
res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
[ 2088.845947] ata1.00: status: { DRDY }
[ 2088.845954] ata1.00: failed command: WRITE FPDMA QUEUED
[ 2088.845965] ata1.00: cmd 61/08:f0:af:ae:07/00:00:1a:00:00/40 tag 30 ncq 4096 out
res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
[ 2088.845970] ata1.00: status: { DRDY }
[ 2088.845978] ata1: hard resetting link
[ 2089.329937] ata1: softreset failed (device not ready)
[ 2089.329948] ata1: applying PMP SRST workaround and retrying
[ 2089.496590] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2089.498245] ata1.00: configured for UDMA/133
[ 2089.509941] sd 0:0:0:0: [sda]
[ 2089.509950] Result: hostbyte=0x00 driverbyte=0x08
[ 2089.509956] sd 0:0:0:0: [sda]
[ 2089.509959] Sense Key : 0xb [current] [descriptor]
[ 2089.509966] Descriptor sense data with sense descriptors (in hex):
[ 2089.509969] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2089.509987] 1a 07 b2 c7
[ 2089.509996] sd 0:0:0:0: [sda]
[ 2089.509999] ASC=0x0 ASCQ=0x0
[ 2089.510004] sd 0:0:0:0: [sda] CDB:
[ 2089.510006] cdb[0]=0x2a: 2a 00 1a 07 ae 97 00 00 08 00
[ 2089.510021] end_request: I/O error, dev sda, sector 436711063
[ 2089.510032] Buffer I/O error on device dm-3, logical block 631
[ 2089.510035] lost page write due to I/O error on dm-3
[ 2089.510058] sd 0:0:0:0: [sda]
[ 2089.510061] Result: hostbyte=0x00 driverbyte=0x08
[ 2089.510066] sd 0:0:0:0: [sda]
[ 2089.510068] Sense Key : 0xb [current] [descriptor]
[ 2089.510073] Descriptor sense data with sense descriptors (in hex):
[ 2089.510075] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2089.510091] 1a 07 b2 c7
[ 2089.510099] sd 0:0:0:0: [sda]
[ 2089.510101] ASC=0x0 ASCQ=0x0
[ 2089.510106] sd 0:0:0:0: [sda] CDB:
[ 2089.510108] cdb[0]=0x2a: 2a 00 1a 07 ae b7 00 00 08 00
[ 2089.510121] end_request: I/O error, dev sda, sector 436711095
[ 2089.510126] Buffer I/O error on device dm-3, logical block 635
[ 2089.510129] lost page write due to I/O error on dm-3
[ 2089.510140] sd 0:0:0:0: [sda]
[ 2089.510142] Result: hostbyte=0x00 driverbyte=0x08
[ 2089.510146] sd 0:0:0:0: [sda]
[ 2089.510149] Sense Key : 0xb [current] [descriptor]
[ 2089.510153] Descriptor sense data with sense descriptors (in hex):
[ 2089.510155] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2089.510171] 1a 07 b2 c7
[ 2089.510178] sd 0:0:0:0: [sda]
[ 2089.510181] ASC=0x0 ASCQ=0x0
[ 2089.510185] sd 0:0:0:0: [sda] CDB:
[ 2089.510187] cdb[0]=0x2a: 2a 00 1a 07 ae bf 00 00 20 00
[ 2089.510200] end_request: I/O error, dev sda, sector 436711103
[ 2089.510205] Buffer I/O error on device dm-3, logical block 636
[ 2089.510208] lost page write due to I/O error on dm-3
[ 2089.510212] Buffer I/O error on device dm-3, logical block 637
[ 2089.510215] lost page write due to I/O error on dm-3
[ 2089.510220] Buffer I/O error on device dm-3, logical block 638
[ 2089.510222] lost page write due to I/O error on dm-3
[ 2089.510227] Buffer I/O error on device dm-3, logical block 639
[ 2089.510230] lost page write due to I/O error on dm-3
[ 2089.510245] sd 0:0:0:0: [sda]
[ 2089.510248] Result: hostbyte=0x00 driverbyte=0x08
[ 2089.510252] sd 0:0:0:0: [sda]
[ 2089.510254] Sense Key : 0xb [current] [descriptor]
[ 2089.510258] Descriptor sense data with sense descriptors (in hex):
[ 2089.510261] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2089.510276] 1a 07 b2 c7
[ 2089.510284] sd 0:0:0:0: [sda]
[ 2089.510286] ASC=0x0 ASCQ=0x0
[ 2089.510290] sd 0:0:0:0: [sda] CDB:
[ 2089.510293] cdb[0]=0x2a: 2a 00 1a 07 ae df 00 00 c8 00
[ 2089.510305] end_request: I/O error, dev sda, sector 436711135
[ 2089.510310] Buffer I/O error on device dm-3, logical block 640
[ 2089.510313] lost page write due to I/O error on dm-3
[ 2089.510317] Buffer I/O error on device dm-3, logical block 641
[ 2089.510320] lost page write due to I/O error on dm-3
[ 2089.510325] Buffer I/O error on device dm-3, logical block 642
[ 2089.510327] lost page write due to I/O error on dm-3
[ 2089.510332] Buffer I/O error on device dm-3, logical block 643
[ 2089.510335] lost page write due to I/O error on dm-3
[ 2089.510400] sd 0:0:0:0: [sda]
[ 2089.510403] Result: hostbyte=0x00 driverbyte=0x08
[ 2089.510407] sd 0:0:0:0: [sda]
[ 2089.510409] Sense Key : 0xb [current] [descriptor]
[ 2089.510414] Descriptor sense data with sense descriptors (in hex):
[ 2089.510416] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2089.510432] 1a 07 b2 c7
[ 2089.510440] sd 0:0:0:0: [sda]
[ 2089.510442] ASC=0x0 ASCQ=0x0
[ 2089.510446] sd 0:0:0:0: [sda] CDB:
[ 2089.510449] cdb[0]=0x2a: 2a 00 1a 07 af a7 00 00 90 00
[ 2089.510461] end_request: I/O error, dev sda, sector 436711335
[ 2089.510502] sd 0:0:0:0: [sda]
[ 2089.510505] Result: hostbyte=0x00 driverbyte=0x08
[ 2089.510509] sd 0:0:0:0: [sda]
[ 2089.510511] Sense Key : 0xb [current] [descriptor]
[ 2089.510515] Descriptor sense data with sense descriptors (in hex):
[ 2089.510518] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2089.510533] 1a 07 b2 c7
[ 2089.510541] sd 0:0:0:0: [sda]
[ 2089.510543] ASC=0x0 ASCQ=0x0
[ 2089.510548] sd 0:0:0:0: [sda] CDB:
[ 2089.510550] cdb[0]=0x2a: 2a 00 1a 07 b0 37 00 00 b8 00
[ 2089.510563] end_request: I/O error, dev sda, sector 436711479
[ 2089.510610] sd 0:0:0:0: [sda]
[ 2089.510613] Result: hostbyte=0x00 driverbyte=0x08
[ 2089.510617] sd 0:0:0:0: [sda]
[ 2089.510619] Sense Key : 0xb [current] [descriptor]
[ 2089.510623] Descriptor sense data with sense descriptors (in hex):
[ 2089.510626] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2089.510641] 1a 07 b2 c7
[ 2089.510649] sd 0:0:0:0: [sda]
[ 2089.510651] ASC=0x0 ASCQ=0x0
[ 2089.510656] sd 0:0:0:0: [sda] CDB:
[ 2089.510658] cdb[0]=0x2a: 2a 00 1a 07 b0 ef 00 00 a8 00
[ 2089.510670] end_request: I/O error, dev sda, sector 436711663
[ 2089.510713] sd 0:0:0:0: [sda]
[ 2089.510716] Result: hostbyte=0x00 driverbyte=0x08
[ 2089.510720] sd 0:0:0:0: [sda]
[ 2089.510722] Sense Key : 0xb [current] [descriptor]
[ 2089.510727] Descriptor sense data with sense descriptors (in hex):
[ 2089.510729] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2089.510744] 1a 07 b2 c7
[ 2089.510752] sd 0:0:0:0: [sda]
[ 2089.510754] ASC=0x0 ASCQ=0x0
[ 2089.510759] sd 0:0:0:0: [sda] CDB:
[ 2089.510761] cdb[0]=0x2a: 2a 00 1a 07 b1 97 00 00 80 00
[ 2089.510774] end_request: I/O error, dev sda, sector 436711831
[ 2089.510812] sd 0:0:0:0: [sda]
[ 2089.510815] Result: hostbyte=0x00 driverbyte=0x08
[ 2089.510819] sd 0:0:0:0: [sda]
[ 2089.510821] Sense Key : 0xb [current] [descriptor]
[ 2089.510825] Descriptor sense data with sense descriptors (in hex):
[ 2089.510828] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2089.510843] 1a 07 b2 c7
[ 2089.510851] sd 0:0:0:0: [sda]
[ 2089.510854] ASC=0x0 ASCQ=0x0
[ 2089.510858] sd 0:0:0:0: [sda] CDB:
[ 2089.510860] cdb[0]=0x2a: 2a 00 1a 07 b2 17 00 00 b0 00
[ 2089.510873] end_request: I/O error, dev sda, sector 436711959
[ 2089.510919] sd 0:0:0:0: [sda]
[ 2089.510922] Result: hostbyte=0x00 driverbyte=0x08
[ 2089.510926] sd 0:0:0:0: [sda]
[ 2089.510928] Sense Key : 0xb [current] [descriptor]
[ 2089.510933] Descriptor sense data with sense descriptors (in hex):
[ 2089.510935] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2089.510951] 1a 07 b2 c7
[ 2089.510959] sd 0:0:0:0: [sda]
[ 2089.510961] ASC=0x0 ASCQ=0x0
[ 2089.510966] sd 0:0:0:0: [sda] CDB:
[ 2089.510968] cdb[0]=0x2a: 2a 00 1a 07 b2 c7 00 00 d8 00
[ 2089.510980] end_request: I/O error, dev sda, sector 436712135
[ 2089.511030] sd 0:0:0:0: [sda]
[ 2089.511033] Result: hostbyte=0x00 driverbyte=0x08
[ 2089.511037] sd 0:0:0:0: [sda]
[ 2089.511039] Sense Key : 0xb [current] [descriptor]
[ 2089.511043] Descriptor sense data with sense descriptors (in hex):
[ 2089.511046] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2089.511061] 1a 07 b2 c7
[ 2089.511069] sd 0:0:0:0: [sda]
[ 2089.511071] ASC=0x0 ASCQ=0x0
[ 2089.511076] sd 0:0:0:0: [sda] CDB:
[ 2089.511078] cdb[0]=0x2a: 2a 00 1a 07 ae 8f 00 00 08 00
[ 2089.511090] end_request: I/O error, dev sda, sector 436711055
[ 2089.511111] sd 0:0:0:0: [sda]
[ 2089.511114] Result: hostbyte=0x00 driverbyte=0x08
[ 2089.511118] sd 0:0:0:0: [sda]
[ 2089.511120] Sense Key : 0xb [current] [descriptor]
[ 2089.511125] Descriptor sense data with sense descriptors (in hex):
[ 2089.511128] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2089.511144] 1a 07 b2 c7
[ 2089.511151] sd 0:0:0:0: [sda]
[ 2089.511154] ASC=0x0 ASCQ=0x0
[ 2089.511158] sd 0:0:0:0: [sda] CDB:
[ 2089.511160] cdb[0]=0x2a: 2a 00 1a 07 ae 9f 00 00 08 00
[ 2089.511173] end_request: I/O error, dev sda, sector 436711071
[ 2089.511188] sd 0:0:0:0: [sda]
[ 2089.511191] Result: hostbyte=0x00 driverbyte=0x08
[ 2089.511195] sd 0:0:0:0: [sda]
[ 2089.511197] Sense Key : 0xb [current] [descriptor]
[ 2089.511201] Descriptor sense data with sense descriptors (in hex):
[ 2089.511204] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2089.511219] 1a 07 b2 c7
[ 2089.511227] sd 0:0:0:0: [sda]
[ 2089.511230] ASC=0x0 ASCQ=0x0
[ 2089.511234] sd 0:0:0:0: [sda] CDB:
[ 2089.511236] cdb[0]=0x2a: 2a 00 1a 07 ae a7 00 00 08 00
[ 2089.511249] end_request: I/O error, dev sda, sector 436711079
[ 2089.511263] sd 0:0:0:0: [sda]
[ 2089.511266] Result: hostbyte=0x00 driverbyte=0x08
[ 2089.511270] sd 0:0:0:0: [sda]
[ 2089.511272] Sense Key : 0xb [current] [descriptor]
[ 2089.511277] Descriptor sense data with sense descriptors (in hex):
[ 2089.511279] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2089.511295] 1a 07 b2 c7
[ 2089.511302] sd 0:0:0:0: [sda]
[ 2089.511305] ASC=0x0 ASCQ=0x0
[ 2089.511309] sd 0:0:0:0: [sda] CDB:
[ 2089.511311] cdb[0]=0x2a: 2a 00 1a 07 ae af 00 00 08 00
[ 2089.511324] end_request: I/O error, dev sda, sector 436711087
[ 2089.511343] ata1: EH complete
[ 2089.511517] REISERFS abort (device dm-3): Journal write error in flush_commit_list
error.log (only part related to the current session):
Sep 28 20:20:21 localhost kernel: [ 2088.845650] ata1.00: exception Emask 0x50 SAct 0x78000ffc SErr 0x400800 action 0x6 frozen
Sep 28 20:20:21 localhost kernel: [ 2088.845660] ata1.00: irq_stat 0x08000000, interface fatal error
Sep 28 20:20:21 localhuzsolt wrote:
I've same problem with an asus laptop, with one hdd. On the device I've some partitions (home, root, backup, var) but this error appears with 'home' only. Sometimes the mount options turns into "read-only", but only on home-partition (ext4, but root, var and a download-directory is ext4 too but they works well).
I found this: https://bbs.archlinux.org/viewtopic.php … 9#p1052099 - I hope this helps for me - and for you too
Errors in logs:
Dec 02 09:44:03 [kernel] [ 666.911555] ata1.00: exception Emask 0x50 SAct 0x4 SErr 0x400800 action 0x6 frozen
Dec 02 09:44:03 [kernel] [ 666.911561] ata1.00: irq_stat 0x08000000, interface fatal error
Dec 02 09:44:03 [kernel] [ 666.911564] ata1: SError: { HostInt Handshk }
Dec 02 09:44:03 [kernel] [ 666.911568] ata1.00: failed command: WRITE FPDMA QUEUED
Dec 02 09:44:03 [kernel] [ 666.911574] ata1.00: cmd 61/68:10:53:25:2a/00:00:04:00:00/40 tag 2 ncq 53248 out
Dec 02 09:44:03 [kernel] [ 666.911574] res 40/00:10:53:25:2a/00:00:04:00:00/40 Emask 0x50 (ATA bus error)
Dec 02 09:44:03 [kernel] [ 666.911577] ata1.00: status: { DRDY }
Dec 02 09:44:03 [kernel] [ 666.911583] ata1: hard resetting link
Dec 02 09:44:03 [kernel] [ 667.396660] ata1: softreset failed (device not ready)
Dec 02 09:44:03 [kernel] [ 667.396668] ata1: applying PMP SRST workaround and retrying
Dec 02 09:44:03 [kernel] [ 667.563375] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 02 09:44:03 [kernel] [ 667.614772] ata1.00: configured for UDMA/133
Dec 02 09:44:03 [kernel] [ 667.614796] sd 0:0:0:0: [sda]
Dec 02 09:44:03 [kernel] [ 667.614798] Result: hostbyte=0x00 driverbyte=0x08
Dec 02 09:44:03 [kernel] [ 667.614801] sd 0:0:0:0: [sda]
Dec 02 09:44:03 [kernel] [ 667.614802] Sense Key : 0xb [current] [descriptor]
Dec 02 09:44:03 [kernel] [ 667.614806] Descriptor sense data with sense descriptors (in hex):
Dec 02 09:44:03 [kernel] [ 667.614808] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Dec 02 09:44:03 [kernel] [ 667.614816] 04 2a 25 53
Dec 02 09:44:03 [kernel] [ 667.614821] sd 0:0:0:0: [sda]
Dec 02 09:44:03 [kernel] [ 667.614822] ASC=0x0 ASCQ=0x0
Dec 02 09:44:03 [kernel] [ 667.614825] sd 0:0:0:0: [sda] CDB:
Dec 02 09:44:03 [kernel] [ 667.614827] cdb[0]=0x2a: 2a 00 04 2a 25 53 00 00 68 00
Dec 02 09:44:03 [kernel] [ 667.614834] end_request: I/O error, dev sda, sector 69870931
Dec 02 09:44:03 [kernel] [ 667.614862] ata1: EH complete
Dec 02 09:44:03 [kernel] [ 667.614949] Aborting journal on device sda3-8.
Dec 02 09:44:03 [kernel] [ 667.614962] EXT4-fs error (device sda3) in ext4_reserve_inode_write:4550: Journal has aborted
Dec 02 09:44:04 [kernel] [ 667.692734] EXT4-fs error (device sda3) in ext4_dirty_inode:4669: Journal has aborted
Dec 02 09:44:04 [kernel] [ 667.720681] EXT4-fs error (device sda3): ext4_journal_start_sb:349: Detected aborted journal
Dec 02 09:44:04 [kernel] [ 667.720690] EXT4-fs (sda3): Remounting filesystem read-only
Dec 02 09:44:04 [kernel] [ 667.721798] EXT4-fs error (device sda3): ext4_journal_start_sb:349: Detected aborted journal
Dec 02 09:44:30 [kernel] [ 694.098612] ata1.00: exception Emask 0x50 SAct 0x40 SErr 0x800 action 0x6 frozen
Dec 02 09:44:30 [kernel] [ 694.098622] ata1.00: irq_stat 0x08000000, interface fatal error
Dec 02 09:44:30 [kernel] [ 694.098627] ata1: SError: { HostInt }
Dec 02 09:44:30 [kernel] [ 694.098635] ata1.00: failed command: WRITE FPDMA QUEUED
Dec 02 09:44:30 [kernel] [ 694.098647] ata1.00: cmd 61/08:30:53:a6:e5/00:00:05:00:00/40 tag 6 ncq 4096 out
Dec 02 09:44:30 [kernel] [ 694.098647] res 40/00:30:53:a6:e5/00:00:05:00:00/40 Emask 0x50 (ATA bus error)
Dec 02 09:44:30 [kernel] [ 694.098653] ata1.00: status: { DRDY }
Dec 02 09:44:30 [kernel] [ 694.098663] ata1: hard resetting link
Dec 02 09:44:30 [kernel] [ 694.583317] ata1: softreset failed (device not ready)
Dec 02 09:44:30 [kernel] [ 694.583328] ata1: applying PMP SRST workaround and retrying
Dec 02 09:44:31 [kernel] [ 694.749997] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 02 09:44:31 [kernel] [ 694.804387] ata1.00: configured for UDMA/133
Dec 02 09:44:31 [kernel] [ 694.804425] sd 0:0:0:0: [sda]
Dec 02 09:44:31 [kernel] [ 694.804428] Result: hostbyte=0x00 driverbyte=0x08
Dec 02 09:44:31 [kernel] [ 694.804434] sd 0:0:0:0: [sda]
Dec 02 09:44:31 [kernel] [ 694.804437] Sense Key : 0xb [current] [descriptor]
Dec 02 09:44:31 [kernel] [ 694.804443] Descriptor sense data with sense descriptors (in hex):
Dec 02 09:44:31 [kernel] [ 694.804447] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Dec 02 09:44:31 [kernel] [ 694.804463] 05 e5 a6 53
Dec 02 09:44:31 [kernel] [ 694.804472] sd 0:0:0:0: [sda]
Dec 02 09:44:31 [kernel] [ 694.804475] ASC=0x0 ASCQ=0x0
Dec 02 09:44:31 [kernel] [ 694.804480] sd 0:0:0:0: [sda] CDB:
Dec 02 09:44:31 [kernel] [ 694.804482] cdb[0]=0x2a: 2a 00 05 e5 a6 53 00 00 08 00
Dec 02 09:44:31 [kernel] [ 694.804497] end_request: I/O error, dev sda, sector 98936403
Dec 02 09:44:31 [kernel] [ 694.804505] Buffer I/O error on device sda3, logical block 9437196
Dec 02 09:44:31 [kernel] [ 694.804508] lost page write due to I/O error on sda3
Dec 02 09:44:31 [kernel] [ 694.804537] ata1: EH complete
The other partition works well on same disk as I wrote above.
Is /home on /dev/sda3?
Maybe you are looking for
-
BAPI_CUSTOMERQUOTATION_CHANGE for changing VC info
Hello ABAPers: I am using BAPI_CUSTOMERQUOTATION_CHANGE for changing Variant Configuration information on quotes. I am filling the table quotation_item_inx with quotation_item_inx-UPDATEFLAG = 'U' quotation_item_inx-CONFIG_ID = 'X' and other VC tabl
-
Hi experts , If I want to know that from where any field of any standard report is coming (i.e. from which database table)............ rgds abaper
-
12.3 and 12.4 beta. Cannot change the size of the ostream buffer with stlport.
The following program does not work as expected when compiled with -library=stlport4 #include <iostream> using namespace std; int main(int argc, char **argv) { cout.rdbuf()->pubsetbuf(new char[20*1024+1], 20*1024+1); cout.sync_with_stdio(fals
-
Can't see which Facebook friends have Skype
I have the latest version of Skype for Desktop and whenever I select 'Find Facebook friends' the Home Page doesn't show me the list of friends who have Skype.
-
Unassigned Profit centers in G/L
Hi experts, I see there are few records with unassigned profit centers in 0FIGL_O02 ODS. In general all transactions in R/3 get posted to G/L with Profit centers. Any of you had the similar issue before? Please suggest. Thanks.