Electronic noise is emitted from my computer when manually dragging the vertical scroll bar with hardware accleration enabled, but no noise is emitted when scrolling any other way (ie hyperscroll via mouse wheel).
[Firefox 4.0]
When I use my mouse button to hold and drag the vertical scrolling bar, my computer emits a soft grainy sound. However, when I hyper scroll with my mouse wheel, there is no noise.
I do not get the quiet noise with Internet Explorer. I did not get this with previous versions of Firefox.
Turning hardware acceleration off resolved this.
I'm running Windows 7 with a dedicated graphics card (GTX 285).
Quote
amd 64=12a @12V
ati 9800=7.5~10.5a @12V (assuming 90~125 watts) a max load,
a 9600 ir nvida 5200 used far less power
so your already at 18a with no fan,s no hd, no cd,no dvd ,no mobo chipset , no mem, no sound..etc
If you exclude the motherboard, memory, etc like you did there, the amd 64 draws 7.2A @ 12V.
90~125W for an ATI 9800?! [irony]Are you working for a PSU manufacturer or what?[/irony] That's just absurd.
Go read this post to get a feel for the actual power consumption: https://forum-en.msi.com/index.php?postid=297061&sid=#post297061
Similar Messages
-
i dropped my iphone yesterday on its backside from my computer desk to floor.the distance is about 50cm. and it has a phone case. it did't work any vertical direction lock .then i restarted my phone, it recovered.but i am not sure is it ok ?
Good job with trying the two-button reset, that would have been my first advice for you. Next, I suggest you take the reset/update a step further. This step may risk losing the data on your phone, but since it's not working already, there may be no other solution.
On your computer, make sure you have internet acces and the latest version of iTunes installed.
Launch iTunes and connect the iPhone
Press and hold both sleep/wake and home buttons
After ten seconds, only release the sleep/wake button.
If you were successful, the iPhone screen should stay dark and the computer should display a popup.
If you see a message saying "iTunes has detected a device in recovery mode," then continue by clicking yes to each subsequent popup.
If the iPhone displays the silver Apple logo start over with step three of these instructions. -
I recently bought a macbook and im trying yo sync all my 2600 photos to it but my phone is synced to another computer in another country which i cant access!! Will i loose all my photos or is there any other way of keeping them and uploading to my new mac?????
Hi jonnywilson78!
Here is an article that will instruct you on importing your photos from your iOS device to your new computer:
iOS: Importing personal photos and videos from iOS devices to your computer
http://support.apple.com/kb/ht4083
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
I am away from home on holiday and all my contacts on my iPad have disappeared. I have tried a hard reset but they have gone. Is there anything else that can be done other than waiting until I get home to my main pc?
Upon purchase of my iPad 2 I began saving contacts to my IPad Contacts application that is already set up upon purchase of iPad 2. I then learnt about synching ( push ) my Gmail contacts to the Ipad 2 contacts 'exchange'. I did this happily and was very pleased with the results however when synching the first time I chose not to delete my iPad 2 contacts I had began saving upon purchase. This meant upon opening 'contacts' I had three choices 'iPad contacts', 'Exchange contacts' or 'All contacts'. There is no way to save ipad contacts directly to the 'Exchange contacts' it has to be saved into a file or vcard and then imported in using e-mail or a PC.
A few days in to using push/exchange I also added calendar and notes to the push/exchange as I was happy with the contacts and e-mail. I did notice some glitches since doing using push/exchange although I think it began when initially I began pushing contacts/mail there may be a slight chance that it began when I turned on calendar and notes facility to the push/exchange. The glitches that began meant sudden blinking during or after saving in calendar, contacts and notes. Sometimes this would mean the item added was there but also sometimes it would mean that it was not. Also double entries began arriving on both m iPad and in my Gmail Contacts online. These were a mix of contacts that I had and had not not created or edited since acquiring my iPad 2 so the was no pattern or obvious reason. They were all also a mix of contacts from different groups saved in my Gmail contacts.
Today suddenly whilst adding a contact the contacts blinked shut again. I re-opened to see what had happened wondering if my contact had been saved or not however not only did what I add not get saved but all approx 500 contacts from both my iPad contacts and my Exchange Contacts vanished from my iPad 2. I opened and closed the contacts to see if they would return but there was nothing. I also hibernated and then later shut down and restarted the iPad many times to no avail. I checked my Gmail Contacts account and thankfully all my contacts were still there. However, it was still extremely frustrating to have everything vanish from my iPad and then not just come back from there especially as he e-mails and calendar seemed to be still working fine with Exhange/push. Also, why had the contacts saved to the IPad contacts directly vanished also ?!! For a £800 gadget not including accessories it really is unacceptable !!!
Finally what worked for me was going to 'Settings', then going to 'mail,contacts,calendars' and then selecting the 'exchange' account and then switching 'contacts' to 'off', then I selected 'delete' iPad contacts i.e delete the contacts saved in the iPad contacts group however with nothing there to lose this time and having a feeling that perhaps that may have contributed to the issues/glitches and this contacts vanishing I clicked on the 'delete'. I really do have a feeling that perhaps the issues may have been due to having two sets of contacts even though there were only a few there in the iPad before they vanished along with the Exchange contacts. I clicked 'done' and then I didn't hibernate the iPad 2 instead I shut it completely down.
Upon restarting my iPad 2 I went to see if the contacts had returned but unfortunately once again they had not. I returned to 'settings', then 'mail,contacts,calendars' and then selected 'exchange' from accounts and switched 'contacts' back on i.e enabled this once again and clicked done. I then once again switched off ( shut down ) my iPad 2 and waited a while. Upon restarting I again went back to contacts and found some of my contacts finally arrive but not all. My 'push/'fetch' for exchange is set to every 15 minutes and every push/fetch showed me more and more contacts until finally I had all but one which has still not showed up ! However, I am once again happy and this time I only have one contacts group I.e for exchange and no separate iPad contacts to confuse me or iPad. I don't know if this will mean all will be okay now as I do feel like perhaps I cannot now trust iPad contacts and maybe need to print out everything and keep this on me also just in case. I'll keep you posted ! -
when opening PS CC 2014 I get message "The program can't start because ONCoreFoundation8.dll is missing from your computer. Try reinstalling the program to fix this problem". I did and still get same message.
Win 7 64bit, have PS cs6, pscc. pscc2014. also Lightroom 5.5 (just upgraded to 5.6). Also the latest updates for all Adobe programs. But still get
But the program does start and seems to work well. But annoying as hell!!!
Also don't understand why there is pscc2014 rather than just updating pscc??
Thanks,
Bob Lurie -
After iTunes requested that I download latest version on PC it now will not open. 2 error messages appear. first: The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. second: iTunes was not installed correctly please reinstall iTunes. Error 7 (Windows error 126). I have tried reinstalling a number of times and restarting computer but no luck.
This happened to me today as well post installing the latest version of itunes. I did a search on google for the error and came across a recommendation to :
Note: Start Windows in Safe Mode to complete any of the following steps if you're unable to access Windows normally due to the msvcr80.dll error.
If, and only if, you're receiving the msvcr80.dll is missing error when you open Apple iTunes, do the following: (skip this step if your msvcr80.dll error is occurring with a different program)
Uninstall from Windows the following five programs in this order: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and finally Apple Application Support. If you have iCloud, remove it as well.
Uninstalling these programs in Windows is done from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Note: Songs and playlists in iTunes will not be removed when you uninstall the iTunes program or any of the other, already-mentioned Apple programs. If you'd still like to back them up, they're usually located in the My Music folder in Windows.
Download the latest version of iTunes from Appleand note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator. If you're not sure how to do that, see How Do I Open an Elevated Command Prompt? for help. That procedure shows you how to open the Command Prompt program as an administrator, but the steps are essentially the same for anything, including the iTunes installation package you just downloaded.
A general overview of removing and reinstalling iTunes can also be found here on Apple's site but the above procedure seems to work better in this particular situation. -
When I start the iTunes program it comes up with this.. pls help!!
"The program can't start because AVFoundationCF.dll is missing from your computer. Try reinstalling the program to fix this problem."
Even after reinstalling iTunes doesn't start!Repair your Apple Application Support.
Control Panel > Programs n Features (Win7) or Add n Remove Programs(XP) > highlight AAS, click CHANGE then REPAIR. -
Can't download itunes update. Keep getting this error message: THe program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem
I researched the advice on the link provided by b noir as well as very similar advice from apple support: http://support.apple.com/kb/TS5376. It worked for me (for now).
Some things of note:
I did all of the things requested by the link I provided
My computer WOULD NOT uninstall Apple Mobile Device Support. I had to manually remove the folder (also as instructed by the url)
I also uninstalled MobileMe. Was a little different than removing the other apps. Follow instructs provided here: http://support.apple.com/kb/HT2992
I did not uninstall iCloud
I have to admit it was a bit scary removing all those things. Is important to note that when re-installing Apple, follow steps to do so as Administrator (the right-click thingy and whatnot).
Hope this helps! -
When i connect to iTunes it says that i have enter my passcode to go in, but i have forgotten my passcode, and the power button is not worrking, is their any other way to do it without the computer or any other internet stuff or stores,
No. You need a computer with iTunes and an internet connection.
Place the iPod in recovery mode using one of these programs and then restore via iTunes:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
When I am Trying to open Mocrosoft Lync 2013. It's showing an error msg. as follows:-
The program can't start because RtmMvrAs.dll is missing from your computer. Try reinstalling the program to fix this problem.
Plz. Help me how to resolve this error .First try an repair of Lync 2013/Office 2013 Pro Plus through Programs & Features.
If that fails and if it is a standalone Lync 2013 installation, uninstall it and then re-install.
If it is part of Office 2013 Pro Plus opposed to Standalone - from Programs & Features select Change and then Add/Remove components. Remove Lync 2013 (select the down arrow and click "Not Available". Once removed, repeat this process but this
time adding it back in.
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
Georg Thomas | Lync MVP
Blog www.lynced.com.au | Twitter
@georgathomas
Lync Edge Port Check (Beta)
This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Hi,
Suddenly while working with Firefox if I happen to drag the vertical scroll bar, a very abnormal behavior occurs. My screen dances up and down for a short time before either going black or getting restored but with no clicks working. The only way to resume is to force a restart of the system.
Any help would be deeply appreciated.
Thanks and Regards
DeepakThat didn't work. On trying to install a new driver I got the error the graphics driver could not find compatible graphics hardware. Is there anything else that can be done to at least prevent the hanging of the computer even if it means less features from Firefox being available?
-
How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.
It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop. And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?
-
I found the below description from the help of BlackBerry Link, however i never get it work.
Any one know whats wrong or what i need to set?
About deleting music, pictures, videos, and documents?
After you sync your music, picture, video, or document files between your computer and your BlackBerrydevice, if you delete a file or a collection of files, the following actions occur:
If you delete files from your computer, BlackBerry Link deletes the file or collection from your device.
If you delete files from your device, BlackBerry Link doesn't delete the file or collection from your computer.
For information about how to delete a file from your device, tap the Help app on the home screen of your device.Hey hkfoolman,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Go into BlackBerry Link and click on the BlackBerry and then click on Options. Make sure you have Music, Pictures, Videos and Documents checkmarked for synchronization. Once these are checked, try to remove the files.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)! -
I was told to update iTunes. I did and it failed. Then every time I tried to open iTunes I get the following message: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." Then I get the following: "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 126)." I have uninstalled and installed iTunes a couple of times with no luck. I cannot even access iTunes support
Troubleshooting issues with iTunes for Windows updates - MSVCR80
-
iTunes wont install. It says "The program can't start because MediaAccessibility.dll is missing from your computer. Try reinstalling the program to fix this problem." I have uninstalled iTunes 5 times and reinstalled it, and nothing has worked. Help!!!!
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99683)
Maybe you are looking for
-
Purchase Tax - Field BSEG- WMWST not getting filled on Invoice documents
Hi, I am posting a Invoice document using FB60. Along with other details, I enter Tax code and check the Calculate Tax check box and SAP calculates & generated extra line for Tax amount. Document is posted successfully. Howver this purchase tax calcu
-
Keynote Presentations not opening on ios7--Helpful Hint
I went on Keynote today on my iPad ready to load a presentation--and found when I clicked it, many of my older presentations would not load. Some of the newer presentations loaded, but not older ones, after, of course, updating to ios7. This hint is
-
CO-PA for good issue documents are not created
Dear All We are using both account & cost based CO-PA , actually the problem is this that when we are doing the sales cycle, after billing my CO-PA document created but the same when I do delivery COGS document not created ,actually for sales I am
-
How to switch to the 32 bit version of CS5(trial) on Mac?
Hello, So, I just downloaded the trial version of photoshop CS5 and its currently running the 64 bit version. I want to be able to make gifs so I need the 32 bit version. I've been scrolling through the forum and it seems that the soln given doesn't
-
Hello All I got a new project in COPA. please help me to survive in this job. When i run a report in COPA, the cost of goods sold(COGS) for a paticular profit center is not matching with report in Profit center accounting(GR55).The dollar value of CO