Element Alignment Back-to-Back

Using: FM 8.0I am not sure if this is even possible but is there a way to keep multiple Elements on the same line that allow TEXT entry?
For example, if I had this structure, keep in mind I am trying to represent what I see when FM View is set to Element Boundaries (as Tags):
-------------------What is shown on my current page----------------
[Document> [RevNumber>Rev.21<RevNumber]
[RevDate>May 21 2008<RevDate] <Document]
-------------------What I would like on my page-----------------------
[Document> [RevNumber>Rev.21<RevNumber] [RevDate>May 21 2008<RevDate] <Document]
My objective is to have two TEXT elements, in this example RevNumb and RevDate set back-to-back without a hard return being placed between them. This would allow the two elements to exist on the same line but have the TEXT wrapped in their own element. Is this possible?
I also attached a pdf in case the graphics are hard to read.
Any help/explanation would be appreciated.
Thanks in advance
JE

Tarun Garg, thank you for taking the time to explain this to me. I have tried it and it works great! You solved my problem.
Thanks
JE

Similar Messages

Hi all new here, am just learning and when i activate the dodge or burn symbol i click over the area to be worked and my Mac freezes. only in the elements software. if i go out of elements i cannot get back in and have to force a software close, any sugg

Hi all new here, am just learning and when i activate the dodge or burn symbol i click over the area to be worked and my Mac freezes. only in the elements software. if i go out of elements i cannot get back in and have to force a software close, any suggestions and please help

Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements

How to find Requisition number of a closed Back-to-back Order

For a closed back-to-back order line how to find the requisition number?
Tried using the "Requisition Summary" form --> Related Documents(Tab) --> providing the Sales order number.
But the LOV attached to sales order does not contain the B2B sales order number.
Hence not able to find the corresponding requisition.
Regards
Edited by: 839781 on Dec 1, 2011 2:25 AM

Are sure it was a B2B sales order?
Does the item placed in the order is ATO enabled?
I can find the requistion of the closed B2B order line from the requistions summary window
only order line is closed..header is still open for me
Thanks
Mahendra

UCMA 4 and back to backing a file transfer request

OK, I know that file transfer isn't technically supported on UCMA 4.0, but I wanted to take another look at it and see whether there was a way to b2b a file transfer request. After all, there's no reason that it shouldn't work if the messaging is correct,
right? The scenario I have is A <-b2b-> app <-b2b->B. I have an IM conversation going on between A and B, so now I'm trying to set it up so that A can send a file to B.
So far I've extended the platform to accept file transfer requests by creating my own call and factory classes, and then registering them using RegisterPlatformExtension. This means that when A sends a file, the INVITE gets delivered to my application.
Now I'm taking that INVITE and creating a new b2b call. A file transfer request looks something like this:
TL_INFO(TF_PROTOCOL) [0]16A8.4B28::02/10/2015-19:53:05.007.001d492f (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265))[3939761282] $$begin_record
Trace-Correlation-Id: 3939761282
Instance-Id: FDB3
Direction: incoming
Peer: 10.0.154.20:49282
Message-Type: request
Start-Line: INVITE sip:[email protected] SIP/2.0
From: <sip:[email protected]>;tag=eafd3e699d;epid=ccd5657cac
To: <sip:[email protected]>
Call-ID: 0acf0330423241258576d7c5cc42aa01
CSeq: 1 INVITE
Contact: <sip:[email protected];opaque=user:epid:d2lIs-103l2YSpDwCSajtAAA;gruu>
Via: SIP/2.0/TLS 10.0.154.20:49282
Max-Forwards: 70
Content-Length: 1920
Content-Type: multipart/mixed;boundary="----=_NextPart_000_0026_01D04541.4641C2D0"
Message-Body:
------=_NextPart_000_0026_01D04541.4641C2D0
Content-Type: application/sdp
Content-Transfer-Encoding: 7bit
Content-ID: <[email protected]>
Content-Dis; handling=optional; ms-proxy-2007fallback
v=0
o=- 0 0 IN IP4 192.168.200.71
s=session
c=IN IP4 192.168.200.71
b=CT:99980
t=0 0
m=data 21300 TCP/RTP/SAVP 127
a=ice-ufrag:lYAu
a=ice-pwd:y0gkW4r9zGSW6E2VdtMprlEh
a=candidate:1 1 TCP-PASS 2120613887 192.168.200.71 10856 typ host
a=candidate:1 2 TCP-PASS 2120613374 192.168.200.71 10856 typ host
a=candidate:2 1 TCP-ACT 2121006591 192.168.200.71 21300 typ host
a=candidate:2 2 TCP-ACT 2121006078 192.168.200.71 21300 typ host
a=candidate:3 1 TCP-PASS 2120612863 10.0.154.20 31624 typ host
a=candidate:3 2 TCP-PASS 2120612350 10.0.154.20 31624 typ host
a=candidate:4 1 TCP-ACT 2121005567 10.0.154.20 3921 typ host
a=candidate:4 2 TCP-ACT 2121005054 10.0.154.20 3921 typ host
a=cryptoscale:1 client AES_CM_128_HMAC_SHA1_80 inline:4CZbzYM/GYDbygj8JwMTodKo85C4Xx7TMzeMIuBU|2^31|1:1
a=crypto:2 AES_CM_128_HMAC_SHA1_80 inline:Ohlo65gDsUvxCF39A382Rl4vGL+SG9R/lUEYU/br|2^31|1:1
a=crypto:3 AES_CM_128_HMAC_SHA1_80 inline:EZ7Zm3K0H/WW5K49LAk9/C0T8x8nhkumJOycSek7|2^31
a=setup:active
a=connection:new
a=rtcp:21300
a=mid:1
a=sendonly
a=rtpmap:127 x-data/90000
------=_NextPart_000_0026_01D04541.4641C2D0
Content-Type: application/ms-filetransfer+xml
Content-Transfer-Encoding: quoted-printable
Content-ID: <[email protected]>
Content-Dis; handling=optional
<request xmlns=3D"http://schemas.microsoft.com/rtc/2009/05/filetransfer" =
requestId=3D"13">
<publishFile>
<fileInfo embedded=3D"true">
<id>{67190A30-C59F-480D-96DD-5F3941C39C49}</id>
<name>dbchange.log</name>
<size>3609</size>
</fileInfo>
</publishFile>
</request>
------=_NextPart_000_0026_01D04541.4641C2D0--
$$end_record
I've got my b2bed invite looking almost identical to the original invite by creating a custom MIME type on the CallEstablishOptions for the back to back call using something like this:
Regex r = new Regex(@"^((.|\n)*)(\<request)((.|\n)*)(request\>)((.|\n)*)$");
Match m=r.Match(args.RequestData.GetMessageBodyString());
content=string.Format("Content-Transfer-Encoding: quoted-printable\r\n{0}{1}{2}",m.Groups[3],m.Groups[4],m.Groups[6]);
opt.CustomMimeParts.Add(new MimePartContentDescription(new ContentType("application/ms-filetransfer+xml"),System.Text.ASCIIEncoding.UTF8.GetBytes(content)));
opt.CustomMimeParts[0].ContentDispositionHeader = new SignalingHeader("Content-Disposition", "render; handling=optional");
So far the only differences I can see in my outbound message vs the original SDP are that the Content-Transfer-Encoding might not be seen as a header (since the SignalingHeaders property on the MimePartContentDescription is read only), and the Content-Transfer-Encoding
on the first MIME part (created by the BackToBackCall) is missing (even though I specified it on the PassThroughHeaders). Even with all of this though, I still get a 488 on client B when I attempt the transfer (even though the invite goes through).
What I'm wondering though, is whether there's any way at all to get this working the way I'd expect, where a file gets transferred directly between A and B, without my bot having to receive it first. The other approach I've looked at is binding my
own media provider class to customize the SDP, but if this MIME part approach isn't going to work, then I have a feeling the media provider won't work either.
Any suggestions on where to look next?
Thanks!
Chris

Chris,
I am trying to do something similar to this and from what I have read and in talking to MS is that you need to extend the Call and Flow class which it looks like you have been able to do. Could I bother you to share what you have written? Maybe we can help
each other out on this. I am basically trying to create an application that will be able to capture a file transfer and save it, then send the original request on to the intended recipient.
Thanks in advance,
Anthony

Can I put two iMac's back to back on the same desk. I noticed the computers feeling hot.

Can I put two iMac computers back to back on the same desk - I share a table with my husband and our computers have to be placed back to back. I noticed the tops of the computers feel hot!

There should definitely be a little space between them to allow for ventilation, but it's normal for the top area to get hot.
Matt

How to print text on back and back of page in smartforms

How to print text on back and back of page in smartforms.

Prince,
in page's output option you can set D for double-sided.
Default: No change of print mode
S     Begin new page in SIMPLEX mode (single-sided)
D     Begin new page in DUPLEX mode (double-sided)
T     Begin new page in TUMBLE DUPLEX mode (double-sided)
Amit.

How can I print a PO form back to back

Hi
I am having one PO form.Totally I am having 15 items in this.These details I need to print back to back on single paper.The first page consists.company logo,vendor and delivery address details only.After that The page printing 5 records and it will go to another paper for printing.But my client needs back to back printing.How can I do this thing.Please help me to solve this problem.

Hi Aruna ,
You want to print both side of the paper or only back side of the paper?, if u want to print both side of
the paper then you can select only 'DUPLEX' in the printing options.
Best Regards,
Narasimha Rao.

Error while calling BAPI_GOODSMVT_CREATE back to back

hi,
all
i am calling two back to back bapi, BAPI_GOODSMVT_CREATE 1st for movement type 313 and then for 315 for same serial nos
(100 in nos.) I have even used bapi_transaction_commit with parameter wait = 'X', after the 1st bapi(313). The first BAPI gets executed sucessfully. But For the second BAPi is gives an error "BA stocK in transfer Exceeded By 27 " . I have put the correct Storage location, Plant and other details. When I run The code for 10 records it gets executred successfully But for more records i get the error.

HI Abhishek,
Were you able to solve the issue mentioned above? Let me know your inputs as i have a similar scenario for which im looking for alternatives.
Appreciate your help in advance.
Amulya

Back-to-Back PO from Sales Order

On Sap B1 2005 when we made a Back-to-Back PO's from Sales Orders the Sales Order information stayed on the screen in the background and was very handy when doing a multiple line items as we put the list prices on non-printable text lines for future reference.
Now with 2007 the sales order information disappears and the only way to keep the information on the screen is to save the order without ticking the PO check box, then re-open it and then tick the PO check box.
Why would SAP do this?

You would better post it on this forum for SAP development team to know:
/community [original link is broken]
Thanks,
Gordon

I had to delete everything on my phone to do the update so how and I suppose to get my photos back I backed them up on aug 21 someone please help

I had to delete everything on my phone to do the update so how and I suppose to get my photos back I backed them up on aug 21 someone please help

Hello Karisma Nichole,
The article linked below details a step-by-step guide to restoring your iPhone from iTunes or iCloud backups.
Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Cheers,
Allen

Help required : Back to back printing for line items.......

I have a critical requirement:
Mulitple Handling units are to be printed, with every new handling unit to be printed on a new page and if the line items for a particular handling unit exceeds the page then it should be printed back to back.... PLease help it very urgent. points will be rewarded.....

go to basic settings an select print mode as "D" means duplex printing..now you will get back top back printing.

Can i set a pdf document to print back to back every time?

have had a look through the help menus but no luck, just wondered if i could change the print settings so that when people open the document it automatically prints back to back every time? thanks in advance.

No.
If you could, what would you expect to happen when someone without a duplex printer prints it?

Printing a PDF back to back

Hi
I have this weird problem.
I am trying to print this 2 page pdf back to back, however I am unable to do so. All my office printers are set by default to do back to back printing. My other word and txt documents all get printed back to back except this pdf. I have checked the settings in my printer as well and they look fine. I know that this is a printer setup and not a setup in any document, but I was jus wondering if there is some setting that needs to be done in the pdf to make it print back to back.
Suggesstions please!
Thanks,
D.

Change File Associations in Mac OS X

Mystery back to back Full GC

Recently we've often seen 2 back to back GCs on our servers, and it seems both are stop the world GCs. The first GC happens toward the end of a young gen collection, the second happens right after and doesn’t seem to collect much memory. I cannot explain what's causing the first one, could it be overflow of survivor space during young gen collection causing full gc? If so, our old gen doesn't seem to be that full. If it is fragmentation issues, then i would be expecting to see some kind of promotion failure error messages. What puzzles me more is the second gc.
If anyone has any similar experiences or suggestions, I would really appreciate.
We are running on JDK 1.6.0_16 on Solaris. Here is the gc log for the two back to back Full GC:
37893.302: [GC 37893.302: [ParNew
Desired survivor size 153387008 bytes, new threshold 7 (max 7)
- age   1:   23471752 bytes,   23471752 total
- age   2:    9676008 bytes,   33147760 total
- age   3:   20601192 bytes,   53748952 total
: 745335K->166386K(1797568K), 0.0768924 secs]37893.379: [CMS: 4973695K->3666928K(8388608K), 5.1921440 secs] 5657754K->3666928K(10186176K), [CMS Perm : 53340K->53304K(86016K)], 5.2693834 secs] [Times: user=5.57 sys=0.04, real=5.27 secs]
37898.571: [Full GC 37898.571: [CMS: 3666928K->3666708K(8388608K), 4.3563034 secs] 3666928K->3666708K(10186176K), [CMS Perm : 53304K->53096K(86016K)], 4.3565658 secs] [Times: user=4.29 sys=0.02, real=4.36 secs]
Our JVM uses the following parameters:
-Xms10g
-Xmx10g
-XX:NewSize=2048m
-XX:MaxNewSize=2048m
-XX:+UseConcMarkSweepGC
-XX:+UseParNewGC
-XX:CMSMarkStackSize=64m
-XX:CMSInitiatingOccupancyFraction=80
-XX:+UseCMSInitiatingOccupancyOnly
-XX:SurvivorRatio=5
-XX:MaxTenuringThreshold=7
-XX:+DisableExplicitGC
-XX:+PrintTenuringDistribution
-XX:+PrintGCDetails
-XX:+PrintGCTimeStamps
-Xloggc:logs/gc.log

I'm also having this problem for full screen games. Hope they fix this soon, it's very aggravating.

Back to back scratch noises from speaker and headphone jack, very faint

I'm having a headphone/speaker issue, but it is very difficult to describe. When I use my computer, the speakers or headphones (if plugged in) will occasionally emit two quick scratchy noises back to back. The speakers and headphones work great, but I can't figure out what the noises are. They sound kinda like if you were to gently scratch the macbook pro casing with your fingernail. Any ideas as to what can cause it to happen?

it seems that m1r3k found a very good workaround, at least for the Mid 2010 Mac mini models (that I'm using right now). I don't know if it works also with more recent Mac mini models.
Re: After upgrading to lion, cant select HDMI sound setting
Open Audio MIDI Setup.app in /Applications/Utility, click the + (plus) button in the bottom left corner of the window and choose "Create Multi-Output Device". In the new device settings tick the HDMI "Use" checkbox and you're done. Simply go to the usual System Preferences Audio panel and choose the newly created device, without the need to unplug the audio cable from the back of the Mac mini. You can also name the new audio device as you want.
NOTE:
This is only a workaround for a deliberate choice made by Apple on OS X Lion 10.7.2 and beyond:
Mac mini: About HDMI audio and headphones
Please let Apple know (here or here) how this has made things unnecessary awkward for users and needs to be fixed (these forums don't count, they are not read by Apple's employees)!

Element Alignment Back-to-Back

Similar Messages

Maybe you are looking for