Elements 10: I lose my edits when I "share to facebook"

Hello!
I've finally started using a copy of Elements 10 I had lying around, and I have a problem. I'm shooting in RAW format, and whenever I make changes to the image using the RAW mini editor (rather than Elements proper), the changes show up all right in Organizer, but when I use the "Share to Facebook" function, it blows away all my edits and posts only the original image as it came out of the camera.
I've tried to use "Save As" instead of "Done," and it doesn't seem to help. I've been searching on google (and these forums) for about half an hour, and I'm completely at a loss.
Please help!
Terry

You need to convert your raw pictures files to the jpeg format.
When you are in the ACR module dialog, instead of choosing 'Done' or 'Save', select 'Open' to open the file in the editor of PSE. You can do edits if you wish, and then you 'save as' selecting the jpeg format.
Just note that the jpeg format is only in 8 bits mode, so have a look at the bottom center menu in the ACR dialog and change it from 16 bits to 8 bits. You need do that change only once, it is 'sticky' afterwards.
Just a note about what 'Done' or 'save' are doing : 'Done' saves the changes you have made with the sliders in a very small file with the same name and the extension '.xmp'. It records the commands, the 'recipe' to adjust your file. It does not change anything in the original raw file. The 'Save' command converts your raw file into another raw format (.DNG).

Similar Messages

When I'm in LR and click edit in PS CS6, I lose my edits and presets once in PS. How do I fix this?

When I'm in LR and click edit in PS CS6, I lose my edits and presets once in PS. How do I fix this?

OK, as you noted, the problem began when you upgraded to LR6, but you did not upgrade PS. LR6 needs Photoshop to have Camera Raw 9.0 for full compatibility. But, there is a workaround. Normally, LR passes the raw file and the adjustment metadata to PS for rendering using PS's camera raw, but LR can render the file as well. Here are the steps to take:
1. Edit > Preferences > General. Under "Prompts," choose "Reset all warning dialogs."
2. Now choose "Edit in Photoshop." You should see something similar to this warning dialog; choose "Render using Lightroom."
In this way, all the adjustments you made in LR will be rendered and the already rendered file will be passed to Photoshop.
Note the checkbox "Don't show again." You may have checked this once before, which is why you may not see the warning dialog. The reset in step 1 brings this warning back in case you've dismissed it.
Hope that helps!
Mike

Has anybody had a problem with the mouse cursor lagging when navigating the drop down menus? this only started happening after a re-install. it only occurs in Photoshop elements 13 in the photo editing section,and no other application. My mouse drivers a

Has anybody had a problem with the mouse cursor lagging when navigating the drop down menus? this only started happening after a re-install. it only occurs in Photoshop elements 13 in the photo editing section,and no other application. My mouse drivers are up to date.Any help or advice would be most welcome.

Good day!
Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements
and please read this (in particular the section titled "Supply pertinent information for quicker answers"):
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
Regards,
Pfaffenbichler

I upgraded from elements 10 to 13 today. When PSE 13 was installed, I uninstalled PSE 10. I also own Lightroom 4.4. However, I used to be able to switch from LR4, to PSE 10 now I cannot switch to PSE 13. (Photo Edit In Edit in Photoshop) is grey. Why?

I upgraded from elements 10 to 13 today. When PSE 13 was installed, I uninstalled PSE 10. I also own Lightroom 4.4. However, I used to be able to switch from LR4, to PSE 10 now I cannot switch to PSE 13. (Photo>Edit In>Edit in Photoshop) is grey. Why?

You might also ask for help in the Lightroom forum.
What I have found is that when I upgraded from PSE12 to 13, my Lightroom 5.6 still selected PSE12 in the list of external editors. I had to use the preferences menu to select the right PhotoshopElementsEditor.exe in the Program Files/Adobe/Photoshop Elements 13 folder. I got a message stating that Photoshop Elements was already selected as external editor. In that message box, there is a button with the option to 'change anyway', which I did. Now LR correctly opens PSE13 when I choose Edit in Elements.

PS CS6 froze when using smudge tool. Will I lose my edit?

PS CS6 froze when using smudge tool. Will I lose my edit? Is there any way to get it to respond without a force quit?
And how can I avoid having PS stop responding every time I am using the smudge tool?
I shut down all other applications, browsers, etc, but it did not help.
Thanks a lot!

Instead of switching to another program if you use Edit/purge/all does it have the same effect?
Of the 16 gigs how much is dedicated to PS?

I'm using premeir elements 10 why it keep freezing when i edited my movie

Im using premeir elements 10 why it keep freezing when edited my movie@

lakepa
Order of Troubleshooting...
(1) Video Card Driver Problem
Does the computer use a NVIDIA GeForcce video card/graphics card? If so, stop and read the announcement at the top of this forum.
It describes the Premiere Elements 10 NVIDIA video card driver problem and gives the fix. For your convenience the following is a
copy/paste of the Announcement. Very important to rule in or out the known Premiere Elements 10 NVIDIA Video Card Driver issue.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing Premiere
Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling back the video card
driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow glitches specific
to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies to you, then the “user to user”
remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of the problems. The typical driver roll back has
gone back as far as March – July 2013 in order to get a working Premiere Elements 10. Neither NVIDIA nor Adobe has taken any corrective
action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
(2) "Movie" Properties
We need to know the properties of your source media, such as,
Video compresson
Audio compression
Frame Size
Frame Rate
Interlaced or Progressive
File Extension
Pixel Aspect Ratio
We could direct you to video and audio properties readout programs, but let us see if we can get the information needed from knowing
the brand/model/settings for the camera that recorded the video.
Please check out these 2 important concerns, let us see what you have, and then we can decide what next. The video card driver matter may fix all.
Do not hesitate to ask if there is anything that you need help to understand what is needed.
Thank you.
ATR

I lose the connection when closing the CMD

Hi guys,
I have configured a standalone listener as following:
C:\Program Files (x86)\Java\jre6\bin> java -Dapex.home=D:\list -Dapex.images=C:\images -jar D:\apex.war
Afterward,
If I close the CMD, I will lose the connection, and I have to reconfigure it again.
If I open APEX locally , I mean by using the shortcut "Get Started With Oracle Database 11g Express Edition" , Then I will lose the connection that uses the default port of the listener, that is 8080.
After I configured the listener I got this message on the CMD
-- listing properties --
PropertyCheckInterval=60
ValidateConnection=true
MinLimit=1
MaxLimit=10
InitialLimit=3
AbandonedConnectionTimeout=900
MaxStatementsLimit=10
InactivityTimeout=1800
MaxConnectionReuseCount=1000
APEX Listener version : 1.1.2.131.15.23
APEX Listener server info: Grizzly/1.9.18-o
May 21, 2011 5:14:41 PM com.sun.grizzly.Controller logVersion
INFO: Starting Grizzly Framework 1.9.18-o - Sat May 21 17:14:41 GST 2011
INFO: http://localhost:8080/apex started.
Using JDBC driver: Oracle JDBC driver version: 11.2.0.2.0
Regards,

Hi,
I'm not sure I got your question right, but I'll try to find some solution anyway.
If I close the CMD, I will lose the connection, and I have to reconfigure it again.That's what happens when a shell is terminated - all associated processes will stop as well. However, if you have a apex-config.xml in your apex.home you shouldn't need to configure your APEX Listener each time your start it, but it would reuse an existing configuration.
If I open APEX locally , I mean by using the shortcut "Get Started With Oracle Database 11g Express Edition" , Then I will lose the connection that uses the default port of the listener, that is 8080.Now, if you have XE running on the same (local) machine as you have your APEX Listener running in standalone mode, you probably have a port conflict: By default, both APEX Listener in standalone mode and the Embedded PL/SQL Gateway (EPG) use port 8080. The EPG is activated as web server for APEX in XE after a fresh installation, the APEX Listener would be an alternative in that case. You can either stop the EPG, or reconfigure any of the two web servers to use a different port, if you want to run them parallel.
To change the port used by the APEX Listener in standalone mode, you simply add another parameter to the startup: -Dapex.port=8888 and you're done.
To change the port used by the EPG, connect as sys and run the following
EXEC DBMS_XDB.SETHTTPPORT(8888);
COMMIT;If you want to disable the EPG, simply set the port to *0* .
After I configured the listener I got this message on the CMDThat's what it should look like.
No, since your topic is "lose the connection when closing the CMD", I assume you search for an alternative. You could run the APEX Listener as a Windows service, even in standalone mode. To do this, you create a batch file, e.g.
%JAVA_HOME%\java -Dapex.home=D:\oracle\APEX_Listener\_home -Dapex.images=D:\oracle\apex_4_0_2\images -Dapex.port=8888 -jar D:\oracle\APEX_Listener\apex_listener.1.1.2.131.15.23\apex.war >>D:\oracle\APEX_Listener\apex_listener.1.1.2.131.15.23\my_apex_listener.log 2>&1Note that you have to set JAVA_HOME as system property or replace the call with the absolute path to your JDK or make sure the JDK is in your PATH variable.
Of course, you can and should change the other directories as well to fit to your system.
Next, create a Windows service, e.g. using [url https://iain.cx/src/nssm/]NSSM (free) or [url http://support.microsoft.com/kb/137890]SRVANY (MS, non-free), that starts your batch as a windows service.
The command for creating that service using NSSM could look as follows
nssm install APEX_Listener D:\oracle\APEX_Listener\apex_listener.1.1.2.131.15.23\startup.cmdYou can edit the service properties afterwards, e.g. change the start mode from "Automatic" to "On Demand".
I hope this answers your question. If not, please point me into the right direction.
Thanks,
Udo

In Zoom Burst Effect Guided Edit, when i use the Add Focus Area button instead of focusing on what i choose it bring the entire photo into focus.

In Zoom Burst Effect in Guided Edit, when I use the Add Focus Area button instead of focusing on what I chose it brings the entire photo into focus.

I'd try resetting the pse 12 preferences by going to Adobe Photoshop Elements Editor (Edit)>Preferences>General
and click on Reset Preferences on next launch, then restart pse 12.

How do I prevent effects from being rasterized/un-editable when I re-open my CS6 file?

Since upgrading to CS6: when I re-open Illustrator CS6 files, I find that effects such as dropshadow, etc. are rasterized as images or other elements that I can't edit as "effects". I'm the single author of these files, so they're being edited on the same computer and in the same program version. Anyone know why this is happening, and how to prevent it? It's really slowing me down.

Is it possible that you have opened older files created in CS5 or earlier? That in itself is not a problem, but if the file wants to keep that earlier version compatability when you save, then there's a mismatch between CS6 and earlier versions of Illustrator, especially around transparency issues like drop shadows.
Make sure to save as an illustrator .ai format and on the second screen of the save dialog box choose CS6 as the version.
Not sure if that's it, but worth checking. Hope that helps…
Michael Riordan
Adobe Certified Instructor
Digital DesignLab

I used the Nik filter collection as a trial version on Elements 12 on MacOS10.9. When the trial was up, the purchased version is not allowed to work. Any suggestions. I've uninstalled everything aand cleaned out all the NIK files from the libraries.

I used the Nik filter collection as a trial version on Elements 12 on MacOS10.9. When the trial was up, the purchased version is not allowed to work. Any suggestions. I've uninstalled everything aand cleaned out all the NIK files from the libraries.

To Mickey: I got the 2 RAR files into one directory, extracted the part1.rar file, and in that new folder there is a file called start.html. I opened this, and followed the links on the right, from "Welcome" to "Getting Started". After all this I had the SAP Management Console, as well as the Database Manager applications created. You will find the specific instructions for setting up the MaxDB under the "Getting Started" link. After setting up the Database Manager you have to start it up with a user-id and password which was created during the set-up, and specifically link the database to the NSP system. I seem to remember that this didn't work at first, because the Database Manager shortcut does not run the program as an administrator. So run it as an administrator! I altered the shortcut's properties under the shortcut/advanced so it will always run the program as an administrator, and haven't had any problems - once you have done the "Add" procedure you may never need to re-visit the database manager.
Edited by: Paul Wright on Jan 8, 2009 2:03 PM

My ipad 1 loses wifi connections when it goes to sllep. have to go into settings to reconnect. Does this all the time. please help.

my ipad 1 loses wifi connections when it goes to sleep. have to go into settings to reconnect. Does this all the time. please help.

my ipad 1 loses wifi connections when it goes to sleep. have to go into settings to reconnect. Does this all the time. please help.

My iPhone4 loses signal and when I do hard reset, I can't send or receive SMS and calls. I have to back-up and restore weekly!

It started last month before I ungraded to iOS5. So my network provider advised me to upgrade. It fixed the problem but it happens again after several days. I lose signal then when I do hard reset, signal is back but I can't send or receive SMS or make and receive calls. But from the other end my phone is ringing but nothing is happening to my phone.This is really frustrating! Coz it happens weekly and the only way to fix it is to back-up and restore. Which is a hassle coz it takes me about 3 hours! Please help. My phone is still under warranty but the provider is telling me it might take them 3 months to check and fix.
I think there is a bug with the iOS5 coz it happen when it I upgraded. Before I was quite happy with my iPhone4 but now it has become a source of anxiety and stress. I've received a lot of complaints at work coz they couldn't contact me.

Try to set it up as new device without using the last backup: How to back up your data and set up as a new device

I have downloaded Photoshop Elements and all went well. When I went to open, it opens fine but is unreadable. I have a Mac and my flash player is up to date. Can you please tell me what I am missing?

I have downloaded Photoshop Elements and all went well. When I went to open, it opens but the content is unreadable. I have a Mac and my flash player is up to date. Can you please tell me what I am missing?
Thanks,
Nikki

I did try to uninstall and reinstall. It messed up my computer. I had to "RESTORE" from the prior days backup. This was not helpful at all. I'm used to losing all my stuff when I connect to iTunes, that's a whole other issue, but now I'm completely banned from any updates to my phone at all. Geeze.......

Acrobat Pro 9 Mac**Making a pdf fill-out form non-editable when it is completed.

HELP!!
If anyone out there can help me I would greatly appreciate it.
I see the forums are with LifeCycle but I need direction for the mac version of acrobat pro.
I am creating a fill-out pdf form for distribution. I would like the person who receives the fill out form to complete the form,
and click a "lock all fields" button or "form completed" button that will make all form fields lock/ non editable when emailed back to me.
Where would I put this script? Can someone give me step by step direction for this button?
I am a novice to this. I don't know how to run a javascript for the button or what is needed to get this completed.
Can someone please help me.
Thank you so much-
Katy

Maybe this will do the trick...
http://forums.adobe.com/message/3813078#3813078#3813078

Will I lose my library when I remove Itunes to install the new program

Will I lose my library when I delete the old version of ITunes to install the new program ?

No, though you should back up your library anyway. See this User Tip for a backup strategy.
You don't need to uninstall your current copy of iTunes to upgrade to a new build.
tt2

Elements 10: I lose my edits when I "share to facebook"

Similar Messages

Maybe you are looking for