Elements importing photos from iPhoto into nonsensical folders - how do I convert events or import into dated folders from iPhoto into elements?

Please help! Can't seem to find the answer on the website or anywhere else online. I don't see an option to convert events from iPhoto into folders in elements. Any advice would be appreciated.

The whole point of a program like organizer is to ignore the folders and use tags and categories instead. However, if you want to preserve the iphoto events then the way to do it is not to use "from iphoto" but rather to export each event from iphoto separately, organize your folders how you want them, where you want them and then use "from files and folders" instead.

Similar Messages

I have videos saved on my memory stick and I-photo however i want to import them into I-movie how do i convert them?

I have videos saved on my memory stick and I-photo however i want to import them into I-movie how do i convert them?

Hi,
If you have the newest version of iPhoto and iMovie, you can access your iPhoto videos in iMovie directly.
On your iMovie, after creating a new project, on the bottom left hand corner, expand your Hard Drive (Macintosh HD), and then click on "iPhoto Videos."
You can use those clicps by dragging them right into your project on the upper left hand corner and use them.
However, if the videos you took on your camera are not supported by iPhoto, then you'll need some third-party software to help you convert them.
cwdlin

IPhoto will not let me close, force quit, or turn off the computer because it says it is "importing photos" when it isn't. How do I fix it?

iPhoto will not let me close, force quit, or turn off the computer because it says it is "importing photos" when it isn't. How do I fix it?

Thank you- so simple, and it worked!

How do I import photos frommy i-phone 6 to my computer , they used to automactically import from my iphone 4 when I connected to my laptop

How do I import photos frommy i-phone 6 to my computer , they used to automactically import from my iphone 4 when I connected to my laptop.. Thanks

read this >>>
Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support

HT4236 I was trying to Import photos to my computer and was asked to upgrade my Iphone before importing. In restoring my Iphone, it deleted all of my 200 new photos and they are now gone. Is there any way to retrieve them?

I was trying to Import photos to my computer and was asked to upgrade my Iphone before importing. In restoring my Iphone, it deleted all of my 200 new photos and they are now gone. Is there any way to retrieve them?

You should ALWAYS import all pics ( and anything selse for that matter) before any update.
If you failed to do this, then the pics are likely gone. You can try restoring from backup.

How can I convert the rulers on the page layout from picas to inches?

How can I convert the rulers on the page layout from picas to inches?
I am creating a print document - the page setup seems to automatically convert from inches back to picas. When I go to the tutorial on creating a document, however, the tutorial shows dimensions in inches. I assume there is some kind of preferences setting but I have not been able to find it.

In the Online Help:
InDesign Help | Rulers and measurement units
From this forum:
CS6 New Document - Units and Increments - Ruler Units Defaulting Back to Picas
InDesign CS5.5 won't respect Units Preference
InDesign Page Margins measured in "P"??? What?
starting a new doc in InDesign
Elsewhere:
http://indesignsecrets.com/change-measurement-systems-on-the-fly.php

I brought in a slideshow but photos didn't include comments. How can I get my comments imported along with the pictures?

I brought in a slideshow but photos didn't include comments. How do I get my comments?

First make sure you've added the comments you want to show in the Add a Description field in iPhoto or in the Title field. If you put them in the Title field and you envoke the feature in iDVD you won't have to delete the title from each slide to give you just the desciption. Or batch remove the Titles from all the photos before you add them to the iDVD project. You can allways get them back with the Photos ➙ Batfch Change menu option later on.
Click on the cog wheel menu button at the bottom and select Show titles and comments checkbox.
Happy Holidays

How can I convert (or switch) the RGB percent values from the LR histogram into RGB values which are shown e. g. in PS/CameraRAW?

In LR 5.5 (same in previous versions) the RGB values in the histogram are shown in percent (relativ) values. I prefere to see the absolute values, but I can`t find any way to switch. Maybe this option is intentional disabled, because LR works in 16-Bit mode this would result in values up to 2^16. But as i compared the relativ values from LR with the absolute values from PS i run into a conversion problem. The following example shows the differences:
CameraRAW : RGB, 128,0,0
Lightroom: RGB, 43,8%, 19,0%, 6,2%
CameraRAW: RGB, 0,128,0
Lightroom: RGB, 29,8%, 47,5%, 17,5%
Mainly i have two questions:
1. Is there any possibility to change the percent RGB values in LR to absolut values?
2. How can i convert CameraRAW values to LR values (see above)?

TThe reason that a design decision was made from the beginning of LR to show only the percentage values was that RGB values are dependent on the color space and the LR histogram and numerical readout are derived from the Develop module's display space which is a hybrid color space with ProPhoto RGB primaries and the sRGB TRC. Thus the numerical values in the display would be different from the exported RGB image (in an orthodox space) and it was feared that this would be misleading. When soft proofing was introduced, because it involved converting the display to an orthodox space, it became possible to use the 0-255 scale in that mode.

How can I convert my logo 300dpi (274 pixels wide) from EPS to Gif format?

I have a logo that needs to be fixed for web purposes. It looks great in print but very poor quality on screen. I need one for my website and HTML email newsletters, along with a high quality GIF 300 DPI (274 pixels wide) for a HTML coded signature. I tried it in Photoshop to save this file as GIF format. But it seems my files is 274 pixel but it is 96 dpi rather than 300dpi. How can I convert it from EPS to 300 DPI (274 pixels wide) GIF file format??
I have an EPS file for it. Can anyone please help me ? Here is the LINK

If your logo is 274 pixel wide at 300DPI it will print .9" wide. DPI is meaningless for the web For displays and displaye drivers do not use the image file dpi setting. Displays are run at one resolution normally their manufactured pixel resolution. Display these days are manufactured with resolution ranging from 96PPI to over 300PPI so your logo will display 2.8" wide on a low 96ppi resolution display and .9" wide on a high 300ppi resolution display. The the difference between Jpeg and Gif is color Jpeg supports 8Bit color so 16M colors but does not support transparency. GIF only supports 256 mapped colors reduced to 255 colors it you want transparent empty pixels. You can also use PGN format which supports transparency and 8 or 16 bit color.

LR5 won't import photos Ijust took. Keeps coming up:"The following files were not imported because they could not be read." And it's ALL the photos. never had this problem be4. what gives?

Keeps coming up:"The following files were not imported because they could not be read." And it's ALL the photos. never had this problem be4. what gives? Using an SD card, its a 64GB 600x Speed . I'm on a Mac 10.8.5; iPhoto has no problem importing them.

In order to see the windows that show sharing and permissions I gave you above, you have to right click on the the item, e.g. folder, HD, etc., and this window comes up. Then you right click on "Get Info" and the windows with S/P pop up. In LR%, if I right click on Destinations folder, this is what comes up:
There is no option to "Get Info", and if I right click within Destinations folder, this is what comes up:
Still no "Get Info". If I click on the specific file (in this case "2015), this is all I get: Last thought, yesterday out of desperation, I called the Apple store. I am operating on Mountain Lion operating system, and Yosemite is the latest (as of 10/14). The manager suggested that if there had been an update in LR5 that was now only compatible with this later system, maybe that was the issue and I should consider updating to Yosemite. I had no problem downloading photos as of 9/14, but don't think I've done anymore since their update….when was the last LR5 (I'm using LR5.7 currently)? Do you think this might be the problem with permissions?

How do I convert an audio CD format album in my library into MP3

Here's my problem. I have two vehicles. The older vehicle only plays audio CDs and the newer vehicle will play MP3 songs. So I want to burn two CDs, an audio and an MP3.
I imported my original CDs into iTunes and kept them in the original format, not as MP3. I then burned an audio CD and it plays correctly. Now I want to burn an MP3 CD but got an error that iTunes cannot burn the MP3 CD as the original songs are not in MP3 format. I don't know how to convert these songs to MP3 and in all the help info I have read there is nothing about this.
I really don't want to delete these songs from the library and re-import them as MP3. that's a lot of music and time.
Does anyone have any ideas?
Thanks, George

You can use iTunes to convert the songs from your CDs to another format. When you convert a song in iTunes it will be converted to the format that you have set to import your CDs in. Converting creates a second copy of the song in the format you have chosen which gives you the opportunity to either keep or delete the original. You can get details on these pages:
How to convert a song to a different format
How To Choose Import Settings

How can I convert and/or import .3ga Android phone Voice Recorder files to iTunes playable format?

My new Android smart phone (Samsung Galaxy S Blaze) has a pre-installed "Voice Recorder" which creates .3ga files of whatever I record with that app. But I can't find anyway to play or utilize them on my PC. I'm new to iTunes (for Windows Vista), and I'm hoping it can play these files somehow but when I drag them to the iTunes window the red circle with a line through it shows up and the file doesn't get transferred. I've also tried importing via iTunes File > Add file to library > click on file on my PC, but then after a second the "Add to Library" window disappears and the Voice file is nowhere to be found in iTunes. Any ideas are welcome. I'm pretty low tech....
Thanks!

iDealshare VideoGo, the professional 3GA to MP3 Converter, can convert 3GA files whatever recorded from Android, Samsung Galaxy S1, S2, S3, S4, Nokia to MP3 format. Besides converting 3GA to MP3, it also can convert 3GA to WAV, M4A, WMA, AC3, AAC, FLAC, OGG, AIFF, RA, AU, DTS, MP2, APE and etc. It even supports to trim or split 3GA audio, merge several 3GA files into one, increase 3GA audio volume, batch convert 3GA files and etc.
Furthermore, iDealshare VideoGo also can convert 3GP, 3GPP, AVI, WMV, MP4, MKV, MPG, RMVB, WTV, ASF, MOV, M4V, DV, MXF, FLV, F4V, Apple ProRes, QCP, SHN, AWB, AMR, VOC, FLAC, OGG, M4B, Apple Lossless ALAC, M4A, CAF, AIFF, APE, PCM, MPC, AU and etc.
Step by step guide on How to Convert 3GA to MP3?

How do you scan events to import to a project?

The biggest issue for me now is that the role of projects and events is conflated.
iMovie '11 allowed you to create projects that were independent of any event. Then you could easily scan the events via thumbnails to find the appropriate clips to drag into your project.
Now, there is no distinction. You have to choose an event when you open a project, or import a file into the project. Basically, there are no more project files. Instead, what you have is an event editor.
Am I missing something? Is there a way to make iMovie 10 (sic) as functional as the previous version?
The first clue for me should have been when the sequel to iMovie '11 was called iMovie 10. It really seems like a step backwards.

FULL EXPLANATION. CREDIT TO APPLE SUPPORT AND THE POSTER OF THE TERMINAL COMMAND.
HOPEFULLY THIS SAVES YOU SEVERAL FRUSTRATED HOURS.
SMB DOES NOT WORK (APPLE / KYOCERA CLASH, USE FTP)
SYSTEM PREF -> SHARING
File Sharing ON
add folder you choose, i used "/users/username/scannerdata"
folder permission for my username READ&WRITE
Remote Login ON
ALL USERS or your username
GENERAL NOTES
Hostname drawn from Ip address given in "File Sharing" tab without afp://192.168.10.38/ so 192.168.10.38
Port: 21
open terminal:(spotlight terminal.app)
paste the below text
sudo -s launchctl load -w /System/Library/LaunchDaemons/ftp.plist
enter password,
type exit.
press enter.
close window.
SYSTEM PREF -> NETWORK -> ADVANCED -> PROXIES -> Ftp Proxy
FTP Proxy Server
192.168.10.38: 21
username : my username
password: my password
use passive FTP Mode = ON
ON PRINTER: (its easiest to use the web browser - generic passwors id admin00, the address book, create user)
host 192.168.10.38
port: 21
path: /users/username/scannerdata
username: my username
password: my password

How can I convert these 250 data points in a spreadsheet file into an array???!!!

I want to convert these points(see spreadsheet file attached) into a 1-D array of numbers and plot them using a vi. I am using the readfromspreadsheet.vi and it just gives me a number 4 and plots that. Please tell me what to do...I'm confused and have a project due!!!
Attachments:
ec1.xls ‏14 KB
test.vi ‏14 KB

Save the excel spreadsheet as tab delimited text file and use "Read From Spreadsheet File" vi to read it.

How do I convert a (sharp) bitmap logo in a Word file into a sharp logo in a PDF?

I saw the help article that described creating a logo with Microsoft Powerpoint, saving it as a Windows meta file (.wmf) and then inserting the graphics into Word. I suppose that means that Word CAN support vector graphics? I am trying to get my graphics design person to send me a vector version of the logo. In the mean time, how come you can not start with a sharp bitmapped image in Word and get an equally sharp image after it is converted to a PDF? Surely doing that is just basic? It's not like Adobe does not know how to manipulate and image? I just don't get it. I tried changing the presets to <Print> quality, but no dice. I can not seem to get word to lose no data when I reduce the size of pictures either, so go figure. Thanks in advance for your help.

It is not sharp when you see it in word, it only appears sharp due to the limited resolution you are viewing at and your distance from the screen. Logos should be made from vector graphics so they can print at any needed resolution and look as good as they can. Bitmaps can look great if they are customized for a specific resolution, but any scaling will ruin it.

Elements importing photos from iPhoto into nonsensical folders - how do I convert events or import into dated folders from iPhoto into elements?

Similar Messages

Maybe you are looking for