Eliminating Zeros on the screen with QUANT & NUMC
I have declaration of the screen field as QUANT & NUMC. Even on the initial population of screen of the transaction, I am seeing the value in those fields as 0.000 ,0. I should not show up these zero values initially on the screen. How can I not show up zeros on the screen. Reply on this is highly appreciated.
Usha
Hi,
Since this is declared as QUANT or NUMC then default value will be 0.0 it is not possible to show blank when it is iniital.
Better to use different data type. May be char.
Assign value of NUMC to CHAR.
you can specify condition...
IF <variable of NUMC> is INITIAL.
<variable of CHAR> = ''.
ELSE.
<variable of CHAR> = <variable of NUMC>.
ENDIF.
and display <variable of CHAR> on the screen.
Similar Messages
-
How to display zero in the screen's input field using numc type
Hi,
I want to display the zero value in the input field , when I using the NUMC input field on the screen .
The zero will be changed to blank ,when I click the Enter key.
What I should do for it?
Any help is appreciated.
Regards,
TrevorHi ,
Thanks for your quickly answer!
I use the numc input field in the dialog's screen.
I am not sure how to do the realize the function like 'UNPACK'?
In fact, I can't changed my input field's data type.
When the status of my input field is display, I can display the zero on the screen. But when the input field is input status , there is blank!
Regards
Trevor -
How to remove leading zeros from the screen?
Hello friends,
I am working on dialog programming.
I have a field with is NUMC 13. so when value is populated, It removes the leading zeros.
How can I display the my value with leading zeros on the screen painter?Call SE51, layout, double-click on field, attributes, tab Program, check Leading zeros.
Regards,
Raymond -
I have a PowerMac G4 running ProTools that no longer boots up. All I get is a file folder on the screen with a flashing question mark in it. Ran the Utility disk and all systems passed. Any ideas?
You need to use the computer's install disks to repair the hard drive or install a new OS.
(58033) -
i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow underneath and what looks like the charger lead. i've had it on charge! is there anything else i can do?
Cconnect it to your computer with the latest version of iTunes installed.
-
Zoom the screen with ctrl 2-Finger Swipe not working in Mavericks
I just bought a new Macbook Air for my wife (running Mavericks) and can't figure out why the Zoom the screen with ctrl 2-Finger Swipe is not working.
I can't find the setting anywhere.
I looked on my Macbook Pro running Mavericks (on which the zoom still works), but I cannot find the setting on that computer either.
Please help.
ThanksSystem Preferences---> Accessibility---> Zoom---> Use scroll gesture with modifier key to zoom. Select ctrl in the drop down menu.
It's a feature not normally turned on, so you might of had it turned on on your Mac before upgrading to Mavericks. And it just kept the setting.
KOT -
I am having a Startup problem. Someone comes on the screen with Open Firmware to Startup. How can I reset the PRAM myself to solve this problem?
Read these.
http://support.apple.com/kb/HT1431
http://reviews.cnet.com/8301-13727_7-10330118-263.html -
while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?
Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
If that does not work then see here http://support.apple.com/kb/HT1808 -
QUESTION from an American in India:
How do I find the screen with my personal iPod (my name's iPod) so I can download from my purchased or free songs/pods from my computer? My iPod has opened to that for 3 years and this week I can't find it: not on purchased page or on Apple store page.See:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities -
Last night i was downloading the new update for the Iphone4 on my laptop through Itunes. After the download was done, it was starting to install, and then an error came up and didnt get a chance to check it. Now my Iphone is stuck on the screen with the USB pointing to the Itunes Icon and wont do anything else. Any advice on how to get this fixed, or do i need to go to the Apple store and have them look at it.
slawdog31 wrote:
Is the sleep wake button at bottom center of the Iphone or on top?
Top
iPhone User Guide -
My MacBookPro has a white screen with a grey file folder in the center of the screen with a white question mark blinking in it. What does this mean? And how can I get my computer back up and running normal?
Start up in Safe Mode.
http://support.apple.com/kb/PH14204?viewlocale=en_US
Repair Disk.
http://support.apple.com/kb/PH5836
Reset PRAM.
http://support.apple.com/kb/PH14222 -
when i m in a call i touch the screen with my cheek and i keep on putting calls on hols or speaker..how do i solve this?if i don t want a headset?
SORRY, the picture is just to illustrate and to better show the area where the time display is located, same place in the iPhone 3gs, to my knowledge, the location is the same, due to the OS on both phones.
Second, run the test to see if it works:
1st test: go to phone mode, select dial key pad, put the tip of your thumb in top of the time display ( the screen will not go black), try to dial.
2nd test: place a call, after starts ringing switch the display to dial pad, put the tip of your thumb on top of the time display, the screen will not go black, try to dial.
THE SCREEN WILL ONLY GO BLACK ( INACTIVE) IF YOU TOUCH A LARGER AREA TO THE TOP OF THE DISPLAY, IF THE THUMB ONLY TOUCHES THE TIME DISPLAY AND A LITTLE PART OF THE AREA WHERE THE NUMBERS APPEAR THE DIAL PAD DID NOT WORK EVEN WITH THE DISPLAY NOT GOING BLACK (INACTIVE).
I am also trying in my wife's iPhone 4 as I right this post and both phones behave the same way.
I found out what I stated above after running tests to see if the case was affecting the phones performance.
Due to the thickness of the case on the sensor area, it really did affect the way the sensor was supposed to work, after I cut that part on the case, the sensor started to work perfectly and the screen turns off during a call like it is supposed to do.
So before someone go nuts thinking that the phone is not working and that they have to take it to repair, try seeing if the case is not interfering with the phones performance. -
will my voice mails be lost if my phone froze trying to update itunes? I have the screen with the USB and the itunes circle. phone completely dysfunctional.
as ar as I know, voicemails aren't stored on your iPhone, your carrier saves them.
To solve the problem you're having, use this: http://support.apple.com/kb/HT1808
Using his article will erase everything on the device, so make sure you have a backup!
Good luck
Message was edited by: jesterwylde -
My iPad was disconnected during upgrade. I've tried restoring and resetting. I just did an iPad erase in "find my iphone" and it still shows the itunes logo and the fire-wire cable on the screen with an arrow. It's currently plugged into my computer. How do I remedy this?
Unable to update or restore
http://support.apple.com/kb/HT1808?viewlocale=en_US -
today I get issues with my z10 device. When I in a phone call, the screen don’t auto turn off. There is no a screen protector on there and it seems that the built-in proximity sensor is not responding. I have to press the screen with my face accidently. can anyone help me with this?
Same issue already several weeks.
And we are not alone:
http://forums.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/i...
At all there is, I think, 4 threads in parallel about this issue at CB forums. One of the:
ms.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/index5.html
I already contacted BB Help at Twitter. Answer:
Thanks for the information. It seems that you have installed an OS version higher than the one supported by your carrier on your device. Please contact your carrier to get the supported OS version and try the proximity and light sensors. Let us know if you need further assistance. Cheers. ^LFC.
I did replay:
You are confused me. Phone got updates over network automatically. On crackberry forum a lot of people from different countries and with Different OS version, but with the same problem. Hi, this is thread at CrackBerry: http://forums.crackberry.com/blackberry-z10-f254/proximity-sensor-906493/index3.html
This my replay was 22 of march. No more answer from BB.
I can't contact my operator - 3UK, because I bought my from on Amazon from Amazon. This phone not from operator - seller is Amazon.
What I already done:
For last week, I read, how to install OS using Sachesi and Autoloader. I used Sachesi to load 3 UK version, I installed autoloader from this links:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
This
For Z10 models STL100-1, 2, -3, -4: Download 10.2.1.1925
Doesn't help
And this:
For Z10 models STL100-2, -3, -4: Download the 10.2.0.1803 OS
No result.
After install all of them phone wants to update to 10.2.1.2102 by air.
BBVE in all versions sais: Can not obtain data from sensors.
Dear BB support, please, can you explain, how to resolve this issue?
Maybe you are looking for
-
"Preparing to import" message won't end.
I'm trying to import pictures from an external hard drive to my new iMac, but it just keeps cranking nonstop with the message "preparing to import." There are over 5000 pictures on the hard drive, but how long should this take?
-
It's simple for Discoverer Guru's...
Hi, How to pass two parameters (start date and end date) in a function from the parameter form. I am calling a procedure (p_dis_volume_Rpt) from the function (F_DIS_VOLUME_RPT). I have registered the fun in admin and included as am item in a folder.
-
Hello, I have a macbook OS X version 10.7.5 I bought this computer years ago used and am yet to figure out how to change the directory name. Help would be greatly appreciated. Thanks!
-
Fuzzy / blurry thumbnails in iPhoto
Since the upgrade from Tiger to Leopard, the thumbnails in iPhoto are blurred, but not the images themselves. This occurs on old libraries, and also on new libraries / albums. The images also looked blurred in the Finder Preview. Any idea why this ha
-
Some of my applications quit before launching. In particular, firefox, bitorrent and pokerpages. I looked at the other thread but it didn't help. I tried doing the permissions repair and the preferences deletion but neither helped. I tried looking at