Email Attachment Format Error

hi frn's ,
i am sending an email with text attachment ....but not getting in desired format in text attachment....
please help
Itab value:
abcdefdfldjfñlkdsjfñldsjfdsñljñla
fdsljfñldskjfldsñkjfñldsjfñldsajñld
vcxusfcxusfcusafcxusafcusafcdsauc
Actual result currently coming in text file:
abcdefdfldjfñlkdsjfñldsjfdsñljñlafdsljfñldskjfldsñkjfñldsjfñldsajñldvcxusfcxusfcusafcxusafcusafcdsauc
Desired format should be
abcdefdfldjfñlkdsjfñldsjfdsñljñla
fdsljfñldskjfldsñkjfñldsjfñldsajñld
vcxusfcxusfcusafcxusafcusafcdsauc
Thanks and Regards
Priyank

i give some coding below
DATA:   it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                  WITH HEADER LINE.
data :con_tab TYPE c VALUE cl_abap_char_utilities=>horizontal_tab ,
       con_cret TYPE c VALUE cl_abap_char_utilities=>cr_lf.
LOOP AT i_mail_sent.
    CONCATENATE
         i_mail_sent-prueflos
         i_mail_sent-lifnr
         i_mail_sent-werk
         i_mail_sent-lagortchrg
         i_mail_sent-matnr
         i_mail_sent-ebeln
         i_mail_sent-ebelp
         i_mail_sent-mblnr
         i_mail_sent-losmenge
         i_mail_sent-mengeneinh
         i_mail_sent-vname
         i_mail_sent-vdatum
         i_mail_sent-dec INTO it_attach   SEPARATED BY con_tab
    CONCATENATE con_cret it_attach INTO it_attach.
    APPEND it_attach.
    CLEAR : it_attach.
ENDLOOP.
FORM sendmail TABLES   p_it_message
                        p_it_attach
               USING    p_mtitle
                        p_format
                        p_filename
                        p_attdescription
                        p_sender_address
                        p_sender_addres_type.
REFRESH : docdata,docdata[].
docdata-doc_size = 1.
docdata-obj_langu = sy-langu.
docdata-obj_name = 'SAPRPT'.
docdata-obj_descr = p_mtitle.
docdata-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR docdata.
READ TABLE it_attach INDEX tab_lines.
docdata-doc_size =
     ( tab_lines - 1 ) * 255 + STRLEN( it_attach ).
docdata-obj_langu = sy-langu.
docdata-obj_name   = 'SAPRPT'.
docdata-obj_descr = p_mtitle.
'Pending Call List.xls Format'.
docdata-sensitivty = 'F'.
t_attachment[] = p_it_attach[].
REFRESH : objpack,objpack[].
CLEAR objpack.
REFRESH objpack.
objpack-transf_bin = space.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
DESCRIBE TABLE it_message LINES objpack-body_num.
objpack-doc_type = 'RAW'.
APPEND objpack.
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num   = 1.
objpack-body_start = 1.
DESCRIBE TABLE t_attachment LINES objpack-body_num.
objpack-doc_type   = p_format." 'XLS'. "ld_format.
objpack-obj_descr = 'Lot Details.'.
objpack-obj_descr = p_attdescription. "'Pending Call List.'.
"ld_attdescription.
objpack-obj_name   = 'Lot Details' ." p_filename.
"'filename'."ld_attfilename.
objpack-doc_size   = objpack-body_num * 255.
APPEND objpack.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      document_data                    = docdata
     put_in_outbox                    = 'X'
     commit_work                      = 'X'
IMPORTING
SENT_TO_ALL                      =
NEW_OBJECT_ID                    =
    TABLES
      packing_list                     = objpack
OBJECT_HEADER                    =
     contents_bin                     = t_attachment
     contents_txt                     = it_message
CONTENTS_HEX                     =
OBJECT_PARA                      =
OBJECT_PARB                      =
      receivers                        = reclist
EXCEPTIONS
TOO_MANY_RECEIVERS               = 1
DOCUMENT_NOT_SENT                = 2
DOCUMENT_TYPE_NOT_EXIST          = 3
OPERATION_NO_AUTHORIZATION       = 4
PARAMETER_ERROR                  = 5
X_ERROR                          = 6
ENQUEUE_ERROR                    = 7
OTHERS                           = 8
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
    MESSAGE ' Records Successfully Send' TYPE 'I'.
ENDIF.

Similar Messages

Android email app formatting errors

Some emails viewed by the standard Android email app don't format corrrectly. However the formatting is correct if I use the Gmail app instead.
Below are two screenshots of the same email. The first using the standard email app has errors - some HTML has not been rendered correctly. The second using the Gmail app is fine.
Am using the latest KitKat.
Any suggestions about how to fix this?
Standard app
Gmail app

Unfortunately that failed to work. Its only a very small number of emails that are affected - from certain senders. So the ones from Banana Republic (for example), always seem to go wrong on this email app. They work OK on the Gmail app, on Windows Live Mail on my computer, and on our IPad.
I now realise this app is a Sony specific app and not a general Android app. I believe there is a minor bug that fails you correctly handle certain HTML sequences. I suspect it has probaly not been kept up-to-date with all the HTML protocols.
Could you report it to the Sony developers.
Many thanks.

Email Spreadsheet format error

Hi,
i tried to send a spreadsheet creating on my ipad2 but when i choose the format of the attachement as excel it begin the convertion but just after it stops and a popup message shows: "An error occurred while creating the attachment".
It's strange because it happens only to 1 file.
Does anyone has suggestion?
Thanks so much
Filippo

You are asking about Numbers for iOS in a forum dedicated to Numbers for OSX.
Maybe you inserted an illegal character like a slash in the file name.
Yvan KOENIG (VALLAURIS, France) jeudi 9 février 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.3
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
For iWork's applications dedicated to iOS, go to :
https://discussions.apple.com/community/app_store/iwork_for_ios

Unicode Upgarde Issue : Excel attachment formatting error

Hi all
We recently had over unicode upgrade.
We have some ALV reports, which when we run in bg, send an email with attachment in excel format. These excel sheets have some XML tags also specified in it.
Now after upgrade, when i open the attachment, whole data ( along with XML tags ) are all filled in the 1st column of the excel.
I am using FM SO_NEW_DOCUMENT_ATT_SEND_API1 to send email
The funny thing..when i copy all these data from column 1 and create a new xls document, the xml format is coming fine.
Can any one please guide me in this issue
Points will be rewarded for all helpful answers

Hello.. any updates..anyone??

Exportpdf changing email attachment format

Why does my email atttachements now come through in pdf formatt only since i have subscribed to exportpdf. I subscribed as my scanner will only scann documents in pdf formatt and I am unable to edit them.

Hi Terry,
Is there a chance that the senders chose to attach PDF's lately? As the ExportPDF subscription would not have an effect on your email file types.
Did you do a test email to yourself as well?
Let me know so we can work together to figure out this inconvenient issue!
Looking forward to hearing back from you.
Kind regards, Stacy

Formatting error in email attachment

Hi experts,
I have encountered a problem regarding formatting errors of the attached file.
the attached error file contains
[ S y s t e m ]
N a m e = I D E
D e s c r i p t i o n = I D E S M a n i l a
C l i e n t = 2 5 1
[ U s e r ]
N a m e =
[ F u n c t i o n ]
T i t l e = A B A P r u n t i m e e r r o r s
C o m m a n d = S T 2 2
but in the contents_bin table
[System]
Name=IDE
Description=IDES Manila
Client=251
[User]
Name=
[Function]
Title=ABAP runtime errors
Command=ST22
as you can see there were no spaces between the letters in the table but in the output there are spaces have been generated.
Please help me with this problem. i need no generate a file the same as what i placed in the table..
points will be rewarded if successful
Edited by: Durairaj Athavan Raja on Jun 22, 2008 10:07 AM

do not post duplicate threads. i have deleted the other one. and
points will be rewarded if successful
the SDN angels dont answer just for points. if you find a answer userful, its your duty to award points to say thanks. dont use that as a mean to woo users.
Regards
Raja

Email attachment in pdf format not getting opened

Dear freinds,
                 i have to send Payslip as PDF as email attachment. So i have used the FM BAPI_GET_PAYSLIP_PDF and further passed the data to FM
SO_NEW_DOCUMENT_ATT_SEND_API1.
But, now iam not able to open the attachment which is in my inbox and it is giving message as the pdf as file is curropt. please could any one tell me what i have to do in this regard
regards
vamsi.

Hi Sai,
call function 'CONVERT_OTF'
      exporting
        format                = 'PDF'
        max_linewidth         = 132
      importing
        bin_filesize          = w_filesize
      tables
        otf                   = t_otf
        lines                 = t_line
      exceptions
        err_max_linewidth     = 1
        err_format            = 2
        err_conv_not_possible = 3
        err_bad_otf           = 4.
    loop at t_line.
      concatenate w_string t_line into w_string.
    endloop.                           " LOOP AT T_LINE
*" convert the 132 line character to 255 character ....................
    do.
      t_attach = w_string.
      append t_attach.
      shift w_string left by 255 places.
      if w_string is initial.
        exit.
      endif.                           " IF W_STRING IS INITIAL
    enddo.                             " DO
    t_objbin[] = t_attach[].
*" Body of the mail..................................................
    clear t_message. refresh t_message.
    t_message = 'This is a mail from SAP ECC6'.
    append t_message.
    t_message = 'Thanks and Regards'.
    append t_message.
    t_message = 'Sravanthi'.
    append t_message.
    describe table t_message lines w_msg.
*" Document data.......................................................
    w_docdata-obj_name = 'SAPRPT'.
    w_docdata-expiry_dat = sy-datum + 10.
    w_docdata-obj_descr = 'Smartform mail from Sravanthi'.
    w_docdata-sensitivty = 'F'.
    w_docdata-doc_size = w_msg * 255.
    w_docdata-obj_langu = sy-langu .
*" Fill the packing list...............................................
    clear t_packing_list. refresh t_packing_list.
    t_packing_list-transf_bin = space.
    t_packing_list-head_start = 1.
    t_packing_list-head_num = 0.
    t_packing_list-body_start = 1.
    t_packing_list-body_num = w_msg.
    t_packing_list-doc_type = 'RAW'.
    append t_packing_list.
    t_packing_list-transf_bin = 'X'.
    describe table t_objbin lines w_objbin.
*" doc_size = (lines in pdf table) * 255...............................
    t_packing_list-doc_size = w_objbin * 255.
    t_packing_list-body_num = w_objbin.
    t_packing_list-doc_type = 'PDF'.
    t_packing_list-obj_name = 'smart'.
    t_packing_list-obj_descr = 'test'.
    append t_packing_list.
call function 'SO_DOCUMENT_SEND_API1'
      exporting
        document_data              = w_docdata
        put_in_outbox              = 'X'
        sender_address             = w_sender
        commit_work                = 'X'
      tables
        packing_list               = t_packing_list
        contents_bin               = t_objbin
        contents_txt               = t_message
        receivers                  = t_receivers
      exceptions
        too_many_receivers         = 1
        document_not_sent          = 2
        document_type_not_exist    = 3
        operation_no_authorization = 4
        parameter_error            = 5
        x_error                    = 6
        enqueue_error              = 7.
    if sy-subrc ne 0.
      write:/ 'Error When Sending the File', sy-subrc.
    else.
      write:/ 'Mail sent'.
    endif.
Regards,
Sravanthi

Error when sending excel as email attachment

Hi All,
I am sending excel document as email attachment through F.M. SO_DOCUMENT_SEND_API1. I am getting the attachment but when i open it, it is giving error "The file is not in recognizable format....."
Please let me know how can i solve this problem.
Regards,
Saba

Hi Saba,
Check this link I think will surely help.
[http://www.sap-img.com/abap/sending-email-with-attachment.htm]
Regards,
Amit.

I have files that have been on my computer for over a year and all of a sudden they wont open and an error message comes up saying they were improperly downloaded or came in an email attach which is not the case

I have files that have been on my computer for over a year and I have used them several times and all of a sudden they wont open. I received an error message saying they are improperly downloaded or came as an email attachement which is not the case. Please advise

They seem to be word files - they will open if I choose "open with" microsoft word, but if I double click they don't open they are appearing as PDF on my screen. I even opened one and then tried to "save as" making sure I chose .doc and they still appear as PDF
I just created a new document response.doc in word and when I saved to my desktop it appears as a PDF file and I absolutely did not create a PDF or save as PDF it was a simple word
doc.
The message says "Adobe reader could not open response.doc because it is either not a supported file type or because the file has been damaged (for example attached in an email and not properly decoded)
The reader version is I believe the most current, I always update when prompted. OS is Windows 8

Email attachment PDF format

Gurus,
Can any body logic for the below requirement for my Report. Report is also pasted. Thanks!
Create a table as given in the requirement
Table:
Cleint   Jobname Email ID Active Subject Text Body Text
                                                   SO10           SO10
·         The email part should contain the entire log and spool if available.
·         Once you have the job list, loop on the list and check if the job is defined in your custom table
o   If you find an entry then
§ Read the Job Log and convert it to HTML
§ Read the spool if available and convert it to pdf
§ Create an email with
·         To: Mail id from your custom table
·         Subject [ below: ]
o   Then write the entire job log.
o   Give one blank line
o   If spool list is available the write else write
o   Give one blank line
o   Write
·         Attachment should contain the PDF attachment of the spool.
o   If the email fails then Write (donu2019t give message) the Job name and message that email failed.
o   If you donu2019t find a mail ID for the job Write (donu2019t give message) the Job name and message that email not found.
·         Continue to the next Job in your list.
REPORT ZJOB_MONITORING.
T A B L E S
TABLES: tbtco.
T Y P E - S P O O L S
TYPE-POOLS: slis.
T Y P E D E C L A R A T I O N S
*TYPES: BEGIN OF type_tbtco,
       include TYPE tbtco,
      END OF type_tbtco.
TYPES: BEGIN OF type_output,
       STRTTIME TYPE tbtco-STRTTIME,
       strtdate TYPE tbtco-strtdate,
       jobname TYPE tbtco-jobname,
       line     TYPE string,
       END OF type_output.
S T R U C T U R E S
DATA: s_tbtco TYPE tbtco,
      s_joblog TYPE zsbb_uc4_joblog,
      s_output TYPE type_output.
I N T E R N A L T A B L E S
DATA: i_tbtco TYPE STANDARD TABLE OF tbtco,
      i_joblog TYPE STANDARD TABLE OF zsbb_uc4_joblog,
      i_output TYPE STANDARD TABLE OF type_output.
DATA: Begin of itab_jobname OCCURS 0,
      jobname type tbtco-jobname,
      end of itab_jobname.
DATA: Begin of itab_user OCCURS 0,
      jobname type tbtco-sdluname,
      end of itab_user.
DATA: Begin of itab_stat OCCURS 0,
      jobname type tbtco-status,
      end of itab_stat.
DATA: Begin of itab_uzeit occurs 0,
      uzeit type sy-uzeit,
      end of itab_uzeit.
Heading of the report.
DATA: t_heading TYPE slis_t_listheader.
DATA : t_fieldcat TYPE slis_t_fieldcat_alv.
S E L E C T I O N S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK bl1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_strtda FOR sy-datum,
                s_lstrun FOR sy-uzeit OBLIGATORY,
                s_jobnam FOR tbtco-jobname,
                s_user   FOR tbtco-sdluname,
                s_status FOR tbtco-status.
PARAMETERS: p_email AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK bl1.
"                         AT SELECTION-SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_JOBNAM-LOW.
PERFORM f4_JOBNAM-LOW.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_JOBNAM-HIGH.
PERFORM f4_JOBNAM-HIGH.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_user-low.
PERFORM f4_USER-LOW.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_user-high.
PERFORM f4_USER-HIGH.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_status-low.
PERFORM f4_STATUS-LOW.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_status-high.
PERFORM f4_STATUS-HIGH.
S T A R T O F S E L E C T I O N
START-OF-SELECTION.
PERFORM select_data.
If email is checked.
Send the output table as an email attachment to the distribution list.
Get the email list from the config table. " ask from where to get it
IF p_email = 'X'.
Call FM 'SO_OBJECT_SEND'.
Fill the fields which are not commented accordingly.
CALL FUNCTION 'SO_OBJECT_SEND'
   EXPORTING
     OBJECT_HD_CHANGE = OBJECT_HD_CHANGE
     OBJECT_TYPE      = 'RAW'
     OWNER            = SY-UNAME
   TABLES
     OBJCONT          = TEXT
     OBJPARA          = OBJPARA
     RECEIVERS        = RECEIVERS
   EXCEPTIONS
     OTHERS           = 01.
IF SY-SUBRC NE 0.
   RAISE ERROR.
ENDIF.
ENDIF.
Prepare the ALV Report.
PERFORM alv_grid_display.
*&      Form alv_grid_display
      text
FORM alv_grid_display .
alv required data objects.
DATA: w_repid    TYPE syrepid,
        x_layout   TYPE slis_layout_alv,
        t_event    TYPE slis_t_event,
       t_fieldcat TYPE slis_t_fieldcat_alv,
        w_title    TYPE lvc_title,
        w_print    TYPE slis_print_alv,
        w_comm    TYPE slis_formname,
        flag       TYPE c VALUE 'N'.
REFRESH t_fieldcat.
REFRESH t_event.
CLEAR   x_layout.
CLEAR   w_title.
Field Catalog
PERFORM set_fieldcat2 USING:
   1 'strttime'   'BTCXTIME'   space           t_fieldcat ,
   2 'jobname'    'BTCJOB'     space           t_fieldcat ,
   3 'line'        space       'Job Log'       t_fieldcat .
*PERFORM set_fieldcat2 USING:
   1 'strttime'   'BTCXTIME'   space     'I_OUTPUT'      t_fieldcat ,
   2 'jobname'    'BTCJOB'     space     'I_OUTPUT'      t_fieldcat ,
   3 'line'        space       'Job Log' 'I_OUTPUT'      t_fieldcat .
PERFORM set_fieldcat.
Layout
x_layout-zebra = 'X'.
x_layout-colwidth_optimize = 'X'.
GUI Status
w_repid = sy-repid .
Top of page heading
PERFORM set_top_page_heading USING t_heading t_event flag.
call the FM 'REUSE_ALV_GRID_DISPLAY'
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     i_callback_program                = w_repid
     is_layout                         = x_layout
     it_fieldcat                       = t_fieldcat
    IT_SORT                           =
     i_save                            = 'X'
     it_events                         = t_event
   TABLES
      t_outtab                         = i_output
   EXCEPTIONS
     program_error                     = 1
     OTHERS                            = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " alv_grid_display
*&      Form set_top_page_heading
      text
FORM set_top_page_heading USING
                           t_heading TYPE slis_t_listheader
                           t_events TYPE slis_t_event
                           flag      TYPE c.
DATA: x_heading TYPE slis_listheader,
        x_event   TYPE LINE OF slis_t_event.
Report title
CLEAR t_heading[].
CLEAR x_heading.
x_heading-typ = 'H'.
x_heading-info = 'Job Details'(002).
APPEND x_heading TO t_heading.
Name of the report program
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-key = 'Report ID:'.
x_heading-info = sy-repid.
APPEND x_heading TO t_heading.
User who is running the report
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-key = 'User: '.
x_heading-info = sy-uname.
APPEND x_heading TO t_heading.
Date of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-key = 'Date: '.
WRITE sy-datum TO x_heading-info.
APPEND x_heading TO t_heading.
Time of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-key = 'Time: '.
WRITE sy-uzeit TO x_heading-info.
APPEND x_heading TO t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-form = 'TOP_OF_PAGE'.
APPEND x_event TO t_events.
ENDFORM.                    " set_top_page_heading
*&      Form set_fieldcat2
      text
FORM set_fieldcat2 USING
                    p_colpos p_fieldname p_ref_fieldname
                    p_seltext_m
                    p_tabname
                    t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
the ref_fieldname given is a data element.
IF NOT p_ref_fieldname IS INITIAL.
    wa_fieldcat-rollname =   p_ref_fieldname.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
    wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
wa_fieldcat-tabname = 'I_OUTPUT'.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM.                    " set_fieldcat2
*&      Form F4_JOBNAM-LOW
      text
--> p1        text
<-- p2        text
FORM F4_JOBNAM-LOW .
SELECT jobname FROM tbtco
              INTO TABLE itab_jobname.
DELETE ADJACENT DUPLICATES FROM itab_jobname.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
DDIC_STRUCTURE         = ' '
      retfield             = 'jobname'
PVALKEY                = ' '
     DYNPPROG               = 'sy-repid'
     DYNPNR                 = '1000'
     DYNPROFIELD            = 's_jobnam-low'
STEPL                  = 0
WINDOW_TITLE           =
VALUE                  = ' '
   VALUE_ORG               = 'S'
MULTIPLE_CHOICE        = ' '
DISPLAY                = ' '
CALLBACK_PROGRAM       = ' '
CALLBACK_FORM          = ' '
    tables
      value_tab            = itab_jobname
FIELD_TAB              =
RETURN_TAB             =
DYNPFLD_MAPPING        =
EXCEPTIONS
PARAMETER_ERROR        = 1
NO_VALUES_FOUND        = 2
OTHERS                 = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
ENDFORM.                    " F4_JOBNAM-LOW
*&      Form F4_JOBNAM-HIGH
      text
--> p1        text
<-- p2        text
FORM F4_JOBNAM-HIGH .
SELECT jobname FROM tbtco
                INTO TABLE itab_jobname.
DELETE ADJACENT DUPLICATES FROM itab_jobname.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
DDIC_STRUCTURE         = ' '
      retfield             = 'jobname'
PVALKEY                = ' '
     DYNPPROG              = 'sy-repid'
     DYNPNR                = '1000'
     DYNPROFIELD           = 's_jobnam-high'
STEPL                  = 0
WINDOW_TITLE           =
VALUE                  = ' '
   VALUE_ORG               = 'S'
MULTIPLE_CHOICE        = ' '
DISPLAY                = ' '
CALLBACK_PROGRAM       = ' '
CALLBACK_FORM          = ' '
    tables
      value_tab            = itab_jobname
FIELD_TAB              =
RETURN_TAB             =
DYNPFLD_MAPPING        =
EXCEPTIONS
PARAMETER_ERROR        = 1
NO_VALUES_FOUND        = 2
OTHERS                 = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
ENDFORM.                    " F4_JOBNAM-HIGH
*&      Form F4_USER-LOW
      text
--> p1        text
<-- p2        text
FORM F4_USER-LOW .
SELECT sdluname FROM tbtco
                INTO TABLE itab_user.
DELETE ADJACENT DUPLICATES FROM itab_user.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
DDIC_STRUCTURE         = ' '
      retfield               = 'user'
PVALKEY                = ' '
     DYNPPROG               = 'sy-repid'
     DYNPNR                 = '1000'
     DYNPROFIELD            = 's_user-low'
STEPL                  = 0
WINDOW_TITLE           =
VALUE                  = ' '
   VALUE_ORG              = 'S'
MULTIPLE_CHOICE        = ' '
DISPLAY                = ' '
CALLBACK_PROGRAM       = ' '
CALLBACK_FORM          = ' '
    tables
      value_tab            = itab_user
FIELD_TAB              =
RETURN_TAB             =
DYNPFLD_MAPPING        =
EXCEPTIONS
PARAMETER_ERROR        = 1
NO_VALUES_FOUND        = 2
OTHERS                 = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
ENDFORM.                    " F4_USER-LOW
*&      Form F4_USER-HIGH
      text
--> p1        text
<-- p2        text
FORM F4_USER-HIGH .
SELECT sdluname FROM tbtco
                INTO TABLE itab_user.
DELETE ADJACENT DUPLICATES FROM itab_user.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
DDIC_STRUCTURE         = ' '
      retfield               = 'user'
PVALKEY                = ' '
     DYNPPROG               = 'sy-repid'
     DYNPNR                 = '1000'
     DYNPROFIELD            = 's_user-high'
STEPL                  = 0
WINDOW_TITLE           =
VALUE                  = ' '
   VALUE_ORG              = 'S'
MULTIPLE_CHOICE        = ' '
DISPLAY                = ' '
CALLBACK_PROGRAM       = ' '
CALLBACK_FORM          = ' '
    tables
      value_tab            = itab_user
FIELD_TAB              =
RETURN_TAB             =
DYNPFLD_MAPPING        =
EXCEPTIONS
PARAMETER_ERROR        = 1
NO_VALUES_FOUND        = 2
OTHERS                 = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
ENDFORM.                    " F4_USER-HIGH
*&      Form F4_STATUS-LOW
      text
--> p1        text
<-- p2        text
FORM F4_STATUS-LOW .
SELECT status FROM tbtco
                INTO TABLE itab_stat.
DELETE ADJACENT DUPLICATES FROM itab_stat.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
DDIC_STRUCTURE         = ' '
      retfield               = 'status'
PVALKEY                = ' '
     DYNPPROG               = 'sy-repid'
     DYNPNR                 = '1000'
     DYNPROFIELD            = 's_status-low'
STEPL                  = 0
WINDOW_TITLE           =
VALUE                  = ' '
   VALUE_ORG              = 'S'
MULTIPLE_CHOICE        = ' '
DISPLAY                = ' '
CALLBACK_PROGRAM       = ' '
CALLBACK_FORM          = ' '
    tables
      value_tab            = itab_stat
FIELD_TAB              =
RETURN_TAB             =
DYNPFLD_MAPPING        =
EXCEPTIONS
PARAMETER_ERROR        = 1
NO_VALUES_FOUND        = 2
OTHERS                 = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
ENDFORM.                    " F4_STATUS-LOW
*&      Form F4_STATUS-HIGH
      text
--> p1        text
<-- p2        text
FORM F4_STATUS-HIGH .
SELECT status FROM tbtco
                INTO TABLE itab_stat.
DELETE ADJACENT DUPLICATES FROM itab_stat.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
DDIC_STRUCTURE         = ' '
      retfield               = 'status'
PVALKEY                = ' '
     DYNPPROG               = 'sy-repid'
     DYNPNR                 = '1000'
     DYNPROFIELD            = 's_status-high'
STEPL                  = 0
WINDOW_TITLE           =
VALUE                  = ' '
VALUE_ORG              = 'C'
MULTIPLE_CHOICE        = ' '
DISPLAY                = ' '
CALLBACK_PROGRAM       = ' '
CALLBACK_FORM          = ' '
    tables
      value_tab              = itab_stat
FIELD_TAB              =
RETURN_TAB             =
DYNPFLD_MAPPING        =
EXCEPTIONS
PARAMETER_ERROR        = 1
NO_VALUES_FOUND        = 2
OTHERS                 = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
ENDFORM.                    " F4_STATUS-HIGH
*&      Form SELECT_DATA
      text
--> p1        text
<-- p2        text
FORM SELECT_DATA .
select the entries from the table TBTCO
as per the selection screen
SELECT * FROM tbtco
           INTO TABLE i_tbtco
           WHERE STRTTIME IN s_lstrun AND
                 strtdate IN s_strtda AND
                 jobname IN s_jobnam AND
                 sdluname IN s_user   AND
                 status   IN s_status.
Get the job details for the above jobs.
LOOP AT i_tbtco INTO s_tbtco.
    CALL FUNCTION 'ZSBB_UC4_JOB_READ_LOG'
      EXPORTING
        client                = sy-mandt
        jobcount              = s_tbtco-jobcount
        joblog                = s_tbtco-joblog
        jobname               = s_tbtco-jobname
      TABLES
        joblog_tab            = i_joblog
      EXCEPTIONS
        cant_read_joblog      = 1
        jobcount_missing      = 2
        joblog_does_not_exist = 3
        joblog_is_empty       = 4
        joblog_name_missing   = 5
        jobname_missing       = 6
        job_does_not_exist    = 7
        OTHERS                = 8.
Write the Error handling as needed.
    IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ELSE.
Append entries to main table.
      s_output-STRTTIME = s_tbtco-STRTTIME.
      s_output-jobname = s_tbtco-jobname.
      LOOP AT i_joblog INTO s_joblog.
        s_output-line = s_joblog-text.
        APPEND s_output TO i_output.
        CLEAR s_output.
      ENDLOOP.
    ENDIF.
ENDLOOP.
ENDFORM.                    " SELECT_DATA
*&      Form SET_FIELDCAT
      text
--> p1        text
<-- p2        text
form SET_FIELDCAT .
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
wa_fieldcat-col_pos = 1.
wa_fieldcat-fieldname = 'STRTTIME'.
wa_fieldcat-seltext_m = 'Start Time'.
wa_fieldcat-tabname = 'I_OUTPUT'.
wa_fieldcat-reptext = p_reptext.
APPEND wa_fieldcat to t_fieldcat.
wa_fieldcat-col_pos = 2.
wa_fieldcat-fieldname = 'JOBNAME'.
wa_fieldcat-seltext_m = 'Job Name'.
wa_fieldcat-tabname = 'I_OUTPUT'.
wa_fieldcat-reptext = p_reptext.
APPEND wa_fieldcat to t_fieldcat.
wa_fieldcat-col_pos = 3.
wa_fieldcat-fieldname = 'LINE'.
wa_fieldcat-seltext_m = 'Job Log'.
wa_fieldcat-tabname = 'I_OUTPUT'.
APPEND wa_fieldcat to t_fieldcat.
endform.                    " SET_FIELDCAT
Edited by: venkata on Aug 12, 2008 4:13 PM

solved

Send PDF as email attachment using Outlook 2011 ERROR

Every time I try to send a PDF as an email attachment, I get the following error:
"An error occurred while trying to create a mail document. Acrobat is unable to complete your request."
Prior to getting this error, every time I sent an email Adobe would open the default Mail program on the mac. I opened mail and changed the preference to use Outlook 2011 as the default mail program, but this did not correct the error.
Any ideas?
Thanks!

AmbooS wrote:
This is a known issue with Mac Outlook 2011 which is an unsupported version for Acrobat X. This will be supported in the next release.
If adobe was smart it would be added in the update rather than in than in AcrobatXI And while at it they need to add support for SeaMonkey and Thunderbird as well. You've been ingnoring of Dissing Mozilla Products since OSX has been out.

Using Maverick, error message: Adobe Reader could not open '***.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

Receiving error message using current Maverick version: "Adobe Reader could not open '***.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).". Is fix the same as on previous OS versions?

Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print or save PDF's displayed in Safari, you may be able to do so by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar should appear under the cursor. Click the printer or disk icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Security
and check the box marked
Allow Plug-ins
Then click
Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others—I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 4 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

Error 829 in SOST tcode while sending an email attachment ??

Hi..
I am using the function module "SO_NEW_DOCUMENT_ATT_SEND_API1" to send an email attachment.
The program is getting executed successfully but when i see in SOST transaction, i am getting an error message.
Error number is 829 and it says " Internal error: SO_OBJECT_MIME_GET Exception: 2 "...
How do i resolve this error ....??

Hi,
Please check this links will help you.
Error in SOST transaction for Mail Triggered from SAP
Re: need help in implementing a note

ODI send email with latest error file attachment

We have kick-out/error file with the format *err.txt. Whenever error occurs the same gets overwritten by the latest file. We are attaching this error file on the completion of the job. If error file generates, everything is fine. But, on the successful run, I mean when there are no error file generation, it attaches the previous run error file.
Anyone of you help me how to handle this situation. Is there any way to validate the file generation date before attaching the file.
Thanks in advance
Edited by: user12958295 on Oct 30, 2012 7:42 AM

Hi,
Thanks for the response.
As of now we are following that as a workaround. However our client wants to avoid the manual work of delete/move/renaming the error file.
Is it possible to check the file generated date with sysdate for attaching the error file by odisendmail.
Thanks!
BRM

CL_SMTP_RESPONSE ESMTP error - Email Attachment

Hi all,
I have the following error comming in a alv report email attachment
The following status was received for the document <Carrier Data Download> sent by you to the recipient < [email protected]>:
<Internal error: CL_SMTP_RESPONSE ESMTP error code is not known. 554 554No relayi>.
i_receivers-receiver = l_email.
i_receivers-rec_type = 'U'.
i_receivers-com_type = 'INT'.
i_receivers-notif_del = 'X'.
i_receivers-notif_ndel = 'X'.
APPEND i_receivers.
If i use the following for sap inbox, it is comming well.
i_receivers-receiver = l_email.
i_receivers-rec_type = 'B'.
i_receivers-com_type = ''.
i_receivers-notif_del = 'X'.
i_receivers-notif_ndel = 'X'.
APPEND i_receivers.
Please give me some advise.
What is CL_SMTP_RESPONSE ESMTP error.
And what I should do, if I have more than 255 characters.
My internal table for output has 1025 characters.
Thankyou
Neelu.

Hi,
Check this link
configuring SMTPPlugin for sending mail to Internet
Thanks & Regrads,
Judith.

Email Attachment Format Error

Similar Messages

Maybe you are looking for