Email button error works but gives Error message "10"

I have "attach to email" buttons on my forms. I leave the email address blank for the person to fill in themselves. It works fine but on one form (and one form only) when clicking on the button an error message window comes up - with exclamation mark and the number "10", that's it. The button works (attached the file to an email) but still gives the message. My other forms don't give this message though the buttons appear identical.
What could be causing this?
(Livecycle 8.0)
Thanks in advance, Marg

Remove the "mailto:" from the Submit tab if you have the script code written in the event.
But usually if you have "mailto:" in the submit tab and while you are preview mode, it will open two email windows. A new email with the subject as "Form Returned"..(This new email error will work only if Acrobat Pro is used by the Designer while previewing the form. If the Designer uses Acrobat Reader while previewing it does not even show any error and simply quits. You can check which one is used while previewing by going to your Windows -> Task Manager and see which EXE is running. For Acrobat Acrobat.EXE and for Reader it will be AcroRd32.EXE).
Try removing the mailto: from the Submit tab and if you still have issues, may be you can send the file to [email protected] , I can have a look at it..
Thanks
Srini

Similar Messages

  • Good morning, my photoshop stopped working, it gives error when started, what can it be?  This is the message that appears: Unable to start the program it took a unexpected end of file  I hope answer

    Good morning, my photoshop stopped working, it gives error when started, what can it be?
    This is the message that appears:
    Unable to start the program it took a unexpected end of file
    I hope answer

    Could not initialize Photoshop because an unexpected end-of-file was encountered. | Mylenium's Error Code Database
    Mylenium

  • HT5622 my apple id is not working when i sign in from my laptop it works but when i sign in from my iphone4 then its not working it gives the message of "your aapleid or password is incorrect"? how can i solve this problem please help

    my apple id is not working when i sign in from my laptop it works but when i sign in from my iphone4 then its not working it gives the message of "your aapleid or password is incorrect"? how can i solve this problem please help

    Hey nocillado,
    Thanks for using Apple Support Communities.
    It sounds like you have 2 things you want to address. These articles can help you use iCloud with your existing Apple ID.
    Get help activating your iPhone
    http://support.apple.com/kb/ts3424
    Using your Apple ID for Apple services
    http://support.apple.com/kb/ht4895
    Using the same Apple ID for Store purchases and iCloud (recommended)
    Have a nice day,
    Mario

  • Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email.  t worked, but only for those with PC.  I could not get it to work with Apple Yosemite even with reader installed .  is there a way i can make it work for apple /

    Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. It worked, but only for those with PC. However,  I could not get it to work with Apple loaded with Yosemite even with reader installed .  Is there a way i can make it work for apple / Mac? It worked fine on a mac using Mountain Lion and reader
    Thanks

    LiveCycle = XFA forms.
    afaik - These cannot be used in Apple OSs.
    Be well...

  • Unable to continue because of a hardware or system error. sorry but this error is unrecoverable

    I am using PSE 9 and am running on a XP .
    When I open the editor , I get an error message  " unable to continue because of a hardware or system error. sorry but this error is unrecoverable "
    Please heeeeeeeeeelp me ..!

    Bump up as many times as you want... nobody can help without DETAILS
    More information needed for someone to help http://forums.adobe.com/thread/416679
    Some specific information that is needed...
    Brand/Model Computer (or Brand/Model Motherboard if self-built)
    Build a Configuration file http://www.piriform.com/speccy
    How much system memory you have installed, such as 2Gig or ???
    Operating System version, such as Win7 64bit Pro... or whatevevr
    -including your security settings, such as are YOU the Administrator
    -and have you tried to RIGHT click the program Icon and then select
    -the Run as Administrator option (for Windows, not sure about Mac)
    Your Firewall settings and brand of anti-virus are you running
    Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
    -or the brand/model graphics chip if on the motherboard
    -and the exact driver version for the above graphics card/chip
    -and how much video memory you have on your graphics card
    Brand/Model sound card, or sound "chip" name on Motherboard
    -and the exact driver version for the above sound card/chip
    Size(s) and configuration of your hard drive(s)... example below
    -and how much FREE space is available on each drive (in Windows
    -you RIGHT click the drive letter while using Windows Explorer
    -and then select the Properties option to see used/free space)
    Windows Indexing is BAD http://forums.adobe.com/thread/676303
    While in Properties, be sure you have drive indexing set OFF
    -for the drive, and for all directories, to improve performance
    Some/Much of the above are available by going to the Windows
    Control Panel and then the Hardware option (Win7 option name)
    OR Control Panel--System--Hardware Tab--Device Manager for WinXP
    And the EXACT type and size of file that is causing you problems
    -for pictures, that includes the camera used and the pixel dimensions

  • IPad Air wifi works but Safari returns message cannot connect to Apple server?

    using iPad Air wifi works but Safari returns message cannot connect to Apple server? (Friends iPad otherwise couldn't post!)

    Many thanks for contacting me Carolyn. However the wifi was working fine and I found the solution from this posting:
    https://discussions.apple.com/message/25449630
    So resetting the iPad by holding down the Home and Sleep buttons together to reset it did the job.
    Cheers
    Peter
    Sent from my iPad

  • Help! My iPod touch won't let me download any apps. A message keeps coming up saying "This Apple ID cannot be used for the iTunes store. Please enter another Apple ID" I changed my ID to see if that would work but the same message still comes up.

    Help! My iPod touch won't let me download any apps. A message keeps coming up saying "This Apple ID cannot be used for the iTunes store. Please enter another Apple ID" I changed my ID to see if that would work but the same message still comes up.

    Where are you physically located?
    What country's Store are you using?
    The two have to be the same and the payment method for your account also has to be associated (billing address, where iTunes gift card was purchased) with that country.
    Has the ID(s) worked before for purchases for this country's store?

  • Can't sync ical on my iphone and imac. email and note work but not ical.  can anyone help.

    can't sync ical on my iphone and imac. email and note work but not ical.  can anyone help.
    thanks
    bmoreimac

    So how can i make it work that way, i asked one of my friends, and she says it works like that...when she delete the email on her iphone it is deleted on the mac too, what do i do to change this?....my mail it's hotmail, i don't know if its relevant

  • HT4061 Why would my send button stop working while I am messaging another iPad3?

    Why would my "send" button stop working while I am messaging another ipad3? The send button is still blue.

    Hi Freedom666,
    I apologize, I'm a bit unclear on the exact nature of your issue (receiving mail from Gmail to iPad, sending mail from iPad to Gmail, or both). If you are having issues sending or receiving mail on your iPad, you may find the troubleshooting steps in the following article helpful:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Regards,
    - Brenden

  • Motherboard went in my g5 desktop so i go my hard drive extracted with all my data..I now have an ibook g4 laptop and am trying to get gb working but get this message: he Instrument Library is invalid. GarageBand expects a valid Instrument Library folder?

    Motherboard went in my g5 desktop so i go my hard drive extracted with all my data..I now have an ibook g4 laptop running off OSX 10.4.11 and am trying to get Garageband working but get this message: The Instrument Library is invalid. GarageBand expects a valid Instrument Library folder?

    Contact Apple Support:
    http://www.apple.com/support/contact/
    Apple - How to Contact Us:
    http://www.apple.com/contact/
    Be sure to refer to the repair ticket number.
    Sounds like a terrible mixup.
    Good luck & happy computing!

  • My ipod power button wont work but i feel it pressing the button. its not stuck its just defective. what do i do

    my ipod power button wont work but i feel it pressing the button. its not stuck its just defective. what do i do

    Try restoring the iPod to rule out a software problem. First restore from backup and then to factory defaults/new iPod.
    Then an appointment at the Genius Bar of an Apple store is in order.

  • TS3276 The links within all my incoming emails don't work.  The error message= No associated application could be found.

    In all my incoming messages, links do not work.  The error message reads=No associated application can be found.  Any hints?

    Open Safari. From the Safari menu bar click Safari > Preferences then select the General tab.
    Select Safari from the pop up menu next to:  Default web browser
    If that doesn't help, launch Disk Utility located in HD > Applications > Utilities
    Select the startup disk on the left then select the First Aid tab.
    Click:  Verify Disk Permissions
    Restart your Mac when it's finished.
    Try Mail.
    messaged edited by:  cs

  • My iCloud email does not work. Getting error message that i need to uncheck SSL . This does not work. Help

    icloud Email does not work. When running Connection doctor it indicates I must check or uncheck SSL. This has not fixed the problem

    iCloud email addresses (@mac.com, @me.com and @icloud.com) require SSL. Is your address an iCloud address or someone else?

  • PL/PDF - Procedure test1 is executed but gives error

    Hello All,
    I have Oracle XE 10g with Oracle Apex and recently I installed PL/PDF in the same. I tried to execute the headerfooter procedure given in the installation guide. But it gives error ORA-20000: ERR-006 Procedure call error: xxfooter. How can I get the header and footer from this procedure headerfooter?
    - create header footer procedure
    CREATE OR REPLACE procedure headerfooter is
    /* 7. Example: Header, Footer, number of pages */
    l_blob blob;
    begin
    /* Initialize, without parameters means:
    - page orientation: portrait
    - unit: mm
    - default page format: A4 */
    plpdf.init;
    /* Defines the page number alias.
    Default: {nb} */
    plpdf.nopAlias;
    /*Sets the page header procedure name. The program name passed
    as a parameter executes when the page header is created. */
    plpdf.SetHeaderProcName(
    p_proc_name => 'xheader', -- Page header procedure name: xheader
    p_height => 10 -- Height of header section
    /* Sets the page footer procedure name. The program name passed
    as a parameter executes when the page footer is created. */
    plpdf.SetFooterProcName(
    p_proc_name => 'xfooter', --Page footer procedure name: xfooter
    p_height => 10 --Height of footer section
    /* Begin a new page, without parameters means:
    - page orientation: default (portrait) */
    plpdf.NewPage;
    /* Sets the font and its properties */
    plpdf.SetPrintFont(
    p_family => 'Arial', -- Font family: Arial
    p_style => null, -- Font style: regular (default)
    p_size => 12 -- Font size: 12 pt
    /* Draws a rectangle cell with text inside. */
    plpdf.PrintCell(
    p_w => 50, -- Rectangle width
    p_h => 10, -- Rectangle heigth
    p_txt => 'Page 1' -- Text in rectangle
    /* Begin a new page, without parameters means:
    - page orientation: default (portrait) */
    plpdf.NewPage;
    /* Draws a rectangle cell with text inside. */
    plpdf.PrintCell(
    p_w => 50, -- Rectangle width
    p_h => 10, -- Rectangle heigth
    p_txt => 'Page 2' -- Text in rectangle
    /* Returns the generated PDF document.
    The document is closed and then returned in the OUT parameter. */
    plpdf.SendDoc(
    p_blob => l_blob -- The generated document
    /* Print it:*/
         owa_util.mime_header('application/pdf',false);
    htp.p('Content-Length: ' || dbms_lob.getlength(l_blob));
    owa_util.http_header_close;      
    wpg_docload.download_file(l_blob);
    end;
    -Create footer procedure
    CREATE OR REPLACE procedure xfooter is
    begin
    /* Sets the font and its properties */
    plpdf.SetPrintFont(
    p_family => 'Arial', -- Font family: Arial
    p_style => 'I', -- Font style: Italic
    p_size => 8 -- Font size: 8 pt
    /* Print number of page */
    /* Draws a rectangle cell with text inside. */
    plpdf.PrintCell(
    p_w => 0, -- Rectangle width
    p_h => 10, -- Rectangle heigth
    p_txt => to_char(plpdf.CurrentPageNumber) || '/{nb}', -- Text in rectangle
    p_border => '0', -- Without frame
    p_ln => '0', -- Cursor position after the cell is printed: Beside
    p_align => 'C' -- Text alignment: Center
    end;
    Thanks.

    Thanks for your reply,
    Since the owner of header/footer procedures is different than plpdf, I should have given the grants to plpdf schema but unfortunately I missed. Thanks for the answer it worked. Instead of creating synonyms for the procedures in plpdf schema I am passing procedure name with qualifier, the name of its owner, to plpdf api (owner.procedure_name).

  • Oracle ADF application run while debuging but gives error while running

    Hi,
    I created application in oracle ADF, which accesses database from SQL server 2008. I changed database names to different database having same tables. When I debug it by using breakpoint in EOIMPL class, it runs perfectly. But when run it by removing brakpoint it gives error (invalid object). Please Help.
    Thanks.

    can u paste the complete invalid objects error..
    I rember i have seen this case before which possibly got resolved by removing the system folder.. especially the systemfolder/o.j2ee/drs/ folder..
    may be some synching problem..

Maybe you are looking for