Email notifications and links in Iphone

This only happens when I try to read a reply to a post using my iPhone. I get the notification that there has been a reply to a thread via a email in my iPhone. I tap on the libk to take me to the thread and when it opens the window, I get a message saying the discussion does not exist. I open the same message on my MBP and I get taken right to the discussion. What's up with that?

It seems to be a bug in the iPhone. Also reported here:
http://discussions.apple.com/thread.jspa?messageID=4965398&#4965398

Similar Messages

  • Email notifications and load balancing

    We are load balancing 2 OMS's. The problem is email notifications have embedded links that have the OMS that sent the notification instead of the virtual hostname set-up for the load balancer. The OMS's have been set-up to use the load balancer per the OEM Advanced Configuration and from an agent/Web console perspective, everything is working fine and using the load balanced hostname. Does anyone know where to modify the email notifications so the links point to the load balanced URL rather then the individual OMS host that sent the notification?

    Thanks, but I was actually asking about the links that OEM has in the email content sent out as part of a notification. (So you can click the link in the notification and it takes you to the appropriate spot in the Grid console). I've since heard from Oracle support that modifying these embedded links to use the load balanced hostname (rather than the individual OMS hostname) is not possible and is something they say they're working on for 11g.

  • HT201320 icloud - changing email address and password on iphone 4s

    i have changed my apple email address and password but cannot change it on icloud on my phone .I have tried deleting the icloud account but cant because the password does not match the old email address . i have tried old passwords also.

    Try putting the device in Airplane mode, may not work.
    A restore of the device may be necessary.  If Find My iPhone is enabled, it would be necessary to wipe the device via www.icloud.com if unable to disable the feature on the device.
    Ideally, the user would delete the iCloud account on the device prior to changing the email account linked to it.  Simply changing the password should not have resulted in this issue.  It is most likely the combo of changing the email and password.

  • Email notification and UWL

    Hello Everyone,
    We are currently implementing Universal Worklist. For a start we will connect it to several SAP back-ends (R/3, SRM, HR), and in a second stage we will connect it also to others -non SAP- systems having their own workflows.
    Currently, each of these back-ends is sending out email notifications (one generic email per back-end each day, with a link to the back-end's inbox). This wouldn't make much sense with UWL, as the user would still receive every day one email from R/3, one email from SRM, etc., but they would all re-direct him to a central inbox (i.e. UWL).
    Is there any functionality comparable to RSWUWFML2/Extended notifications running on the Netweaver Portal? Is there any other solution to this?
    Thanks for sharing your thoughts on this.
    Cheers,
    Patrick

    Hi Kjetil,
    Do you know how the problem was finally solved in your former company?
    I already had a look to your post before, but for me the question is still opened. We have a corporate (non SAP) portal which users see by default when they open their browser and from where they can navigate to the SAP portal, in which we do not have single sign on.
    So our users will definitely not login to the SAP Portal by themselves (nor to go to UWL, nor to display the homepage).
    Maybe that an applet running on the corporate portal and doing RFC calls on the different back-ends would solve it, but I believe that might be quite a burden to develop, especially if we start talking to various non SAP systems as well. A better approach would probably be to query the portal db to look at what is in each user's UWL. But I have no idea of how the UWL data is structured in the portal and how it is updated (i.e. is the delta pull mechanism also running when a user is not logged in the portal?). I am also not sure whether there is an API in the portal to query this easily (i.e. similar to SAP_WAPI_COUT_WORKITEMS). Has anyone tried this approach before?
    Cheers,
    Patrick

  • Human Task email notification and IMS

    Hi Chaps,
    I have a requirement to enable the email notification functionality embedded in Human Tasks. This email functionality presumably emails everyone for that role based on their email information located in Enterprise Manager -> Security -> my relam (?), however when I log into Business Process WorkSpace and try to edit the email address - it states that "Do not use this channel for BPEL User Notification or Human Workflow; it is not stored in the identify management system and will not work"
    Does this mean that I have to directly alter the LDAP Directory (somehow?) or will logging into Enterprise Manager and changing it manually suffice?
    Any help you could provide would be most welcome!
    Thanks..

    To know the more details on email notification using human tasks, follow the below link
    http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10224/bp_hwfmodel.htm#BABICIAH
    Also, if you are trying to send emails without using LDAP, then simply configure the email driver in */em and assign the roles to whom you want to send the email to.

  • Vonage email notifications and Apple Mail client

    Vonage provides a very nice feature in which, as soon as someone leaves a voice mail message, Vonage sends out an email notification to up to five different email addresses, in addition to sending a text message to a cell phone alerting you that someone has left you a voice message on your Vonage phone. Besides getting just a text-based email notification, you can also opt to have Vonage attach a .WAV file to the email it sends to those email accounts you list in your account settings page on the Vonage web site. I think this is a great feature, because I have my iPhone set up to receive the text message, and I also configured my email accounts to receive the email notifications together with the attached .WAV file, so I can listen to the recorded voice mail messages right on the iPhone, without having to dial in to a Vonage number, or go to the Vonage web site to listen to the voice mail via a computer.
    While the Vonage email notifications with the attached .WAV files arrive just fine in my mac.com and my aol.com email accounts, those same email messages are NOT being sent to my the roadrunner.com email account provided by Time-Warner cable, my Internet Service Provider.
    When I brought this matter up the tech support people at Vonage, they theorized that the roadunner server might be blocking receipt of the emails sent by the Vonage server. However, the problem does not seem to be related to roadrunner.com, because those email messages actually do reside on the roadrunner server. I can see them all right, but only if I use a browser and check my messages via their Web Mail application. For some mysterious reason, my Apple Mail client is NOT receiving those messages, and I have no clue why that would be so.
    Does anybody know what is going on here? Shouldn't Apple Mail be able to retrieve all the messages on the roadruner server? What could prevent Apple Mail from being able to do that? And, is there anything I can do to make those email notifications —with their attached .WAV files—show up in my Inbox in Apple Mail?
    Since I thankfully receiving those email notifications at my mac.com and my aol.com accounts, this is not a mission-critical issue for me. It is merely one of one technical curiosity.
    bowlerboy

    To close out this thread, about all I can say is that the issue does not seem to be related to Apple software or to my Internet Service Provider. It is a Vonage issue that can only be fixed by calling Vonage tech support and getting their programmer/technicians to do whatever it is that they to do on their end to configure their Vonage email notifications to function correctly. If something sneezes, as it did in regards to my account, then Vonage tech support is the first place to call.
    I'll consider this issue "answered" now.
    bowlerboy_jmb

  • Exchange email folders and sub-folders: iPhone only pulling main "inbox"

    Hello.
    I've got iPhone set to access my Exchange email via IMAP. My work computer is an Win XP PRo, running Outlook 2007. My Outlook email folders are organized via rules that most important emails are automatically routed to specific folders (such as from a particular client or staff member).
    My problem is The iPhone is only checking for mail in my main inbox. The only way I can get it to check for mail in my sub-folders is to click on the folder. This is a big problem, as I am missing notifications, and have over 35 subfolders!
    I've tried and tried to find a setting I can change, or something...but cannot. Does anyone have any recommendations either via iPhone settings or my Outlook rules settings?
    Thanks so much in advance!
    Sovi

    Thanks for posting that thread. My problem is slightly different in that it won't pull the mail *at all* -- even to the inbox. The mail is only pulled if/when I click on the sub-folder. At that point, the mail goes go to the correct sub-folder.
    For obvious reasons this is an issue -- I miss lots of mail!
    I (we) can't be the only ones using sub-folders with this issue.

  • Email notifications and the notifications to the application

    Hi,
    How to stop email notification so that when the notifications are released, the users doesn't get emails but they should be able to see when they log into the application.
    The reason being to restrict the email notifications in the development instance.
    thanks

    There are several ways I can think of doing this -
    1. Change the global email setting (for all users) to NOMAIL
    Use Workflow Administrator Web Applications responsibility, navigate to Notifications, then click Administration tab, set Notification Style (in Global Preferences) to "Disabled" or "Do not send me mail"
    2. Set a test email address so that all notifications are sent to this test address.
    Use System Administration responsibility, navigate to Workflow, Service Components, click on Workflow Notification Mailer, "Set Override Address" button and follow the wizard instructions.
    3. Turn off (disable) running of Notification Mailer.
    Use System Administration responsibility, navigate to Workflow, Service Components, Workflow Notification Mailer radio button, select "suspend" on right, click Go
    Option #2 is recommended
    HTH
    Srini

  • Reminder email notification and task assignment notification from humantask

    Hi All ,
    We have developed a 3 level approval SOA composite which sends the 1st level approval to a Manager and once Manager approves the request, the approval task is assigned to a 2nd level approver role(Group) for approval and after the approval from 2nd level approver group , the approval task is assigned to a 3rd level approver group .
    After the request is submitted and the task is assigned to Manager for approval. Manager receives a task assignment notification (defined in the notification tab of the .task) and a reminder notification is fired after X hours of the task assignment. The issue is, the assignment notification and reminder notification are same, is it possible to send different notification on task assignment and a different notification on reminder.
    Appreciate your help on this !
    Thanks
    suren

    The default email solutions in planning are using workflow or task lists, though the task lists are based on due dates.
    If you wanted a solution where an email is sent out when a task list is complete, then one route could be to have a business rule attached to a task list and then the business rule uses a custom CDF to send out email notication.
    If you are interested in sending emails from business rules then I did write a blog on the subject a while back.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Take OFF THE EMAIL notification for find my iPhone please....dumbest idea that's been implemented in awhile.

    As everyone else is I'd like to know why the **** apple would quietly put an email notification in the fine my phone app....that's the dumbest idea implemented in a while that should be immediately changed for everyone's sake that's raising a child at the least.

    did u discover how to disable it?

  • Asha 305 email notification and Facebook app issue...

    Sir
    In nokia asha 305
    email app is not get email notification automatically.
    Facebook app does not allow to upload photo,vedio.
    It does not allow to trun off chat, Change pasward,etc settings
    .mp4 vedio not supported.
    Moderator's note: We have amended the title of this post as this was moved from another thread.

    Bro! Every asha mobile user face this problems! Lets hope some changes in next update!

  • I have disabled email notifications (alerts) from my iPhone and yet I keep getting them anyways. What am I doing wrong?

    Hello, I went in the notification center and disabled all alerts and sounds from my 2 mailboxes. It worked for my work mail account, but not for my private account. I keep getting incoming email alerts on my screen. I have turned my phone off and back on hoping it would register the change, but it hasn't. Any ideas on what might be wrong or what I forgot to do? Thanks a lot!

    Something doesn't seem right here. If she has to use her email address as her contact address in order to message with you, that suggest to me that she either doesn't meet the requirements to use her iPhone number as the contact address (iOS 6 or later with an iPhone number linked to her Apple ID) or there is an issue with the way the phone number is being entered.

  • Email problems with BB synched via BES. No email notifications and can't send replies.

    This isn't a question, but more of a public service announcement for those like myself that manage to screw up their email settings. I recently had problems with my email in that I would not get audible or visual notifications of new email and I couldn't send replies although I could forward and create new emails. The problem is that I am using Desktop Manager on two PCs and only one is configured to access my corporate email account, the one that is redirected to the BB. The default settings of my Desktop Manager installation was to synchronize the device date and time automatically when connected to the PC. Connecting my BB to my home machine would cause the email problems. I had to wipe and reactivate to fix my problems.
    So, if you want to use the BB on two PCs and one is not configured for the email account going to the phone... disable the auto synchronization option BEFORE connecting the device to that machine and launching Desktop Manager. It would also be nice if the Desktop Manager installer had an option to install on a PC that is used for backup/recovery and application loading only. The installer had two options IIRC and your choice was that the BB is used with BES or with a personal email account.

    Internally, your invites are processed by the server.
    If an outside sends a new invite to you, the server doesn't know about it until you add the event to your calendar app.
    You'll find settings in Mail and Calendar apps (depending on client OS) to automatically add invites to the Calendar.
    So to sum it up.
    Internal users, processed in real-time directly by the server
    External invites, must be processed by the client app, and depending on OS/Settings, could require manually adding or acknowleding. Also.. in 10.7/10.8 you will see an inbox tray in the Calendar app, your invites may show up there (and you'll need to click to ack)
    Hope that helps.

  • Email text and links display as capital A in a box?

    I recently upgraded my computer to a Macbook Pro 13 inch and restored all my software from a Time Machine backup.  I decided to install MS Office for Mac and all the links in my emails (Mail) began displaying as a capital A in a box.  Adobe emails are completely displayed this way (every character).
    Tips?

    Font problems and management in OS X

  • Email created and sent by iphone is considered a SMS message?

    I was wondering if anyone knew how email created by and sent by an iphone is "charged" by AT&T. I assume it is treated as an SMS text message. Does this also apply to email that is sent to or uploaded to the phone as well? I think this is a question for AT&T support but I think they are sick of me LOL
    iMac Core 2 Duo, Powerbook G4 1.67, PowerMac G4 Tower, 8GB iPhone   Mac OS X (10.4.10)  

    mjbchem,
    To clarify a little. If you create the email and send it via the Mail app on the iPhone it would be data.
    It is possible to send email in some situations from SMS. If you utilize that option, it would be considered an SMS message, not an email. That is mentioned briefly in this AT&T page:
    http://www.wireless.att.com/learn/messaging-internet/messaging/faq-text-messagin g.jsp
    Hope this helps,
    Nathan C.

Maybe you are looking for

  • Converting a word document to a pdf file

    I know how to convert a pages document to a pdf but not a word one

  • Problem BackUping with iCloud

    Hi I am having problem with iCloud. I turned iCloud on for backuping the contacts, and all of a sudden I lost all of my contacts! how should I recover them now?!

  • HT5622 How do I enter a credit card information to buy a book?

    How do I enter a credit card number to buy a book?

  • IPhoto to DVD

    I am in the process of direct transferring iPhoto slideshows to DVD, by-passing iMovie which degrades the photo quality. However the iPhoto slideshows terminate abruptly. How can I install a black screen which allows the music selection to complete p

  • ASR9K BNG and user defined VSAs

    Hello All, I am currently deploying Cisco ASR9K BNG solution and it needs to be integrated with a Cisco ACS 3.3 equipment (yes that old .. going to migrate to new product in the future). There are several specific attributes need that are not on the