Email sender cc: how to work on messages with different XI attachment names

I am currently facing the following problem:
I have to integrate a scenario using email as communication protocol (both in and outbound).
On the outbound way I know what I am getting, so this is no problem.
On the inbound way though I am facing one huge problem:
I am using a module that needs the source attachment name to do its job.
But as I am receiving emails, this source attachment name can be "MailMessage" if someone sends the content inlined or "MailAttachment-1" if someone sends the content attached.
As I am using one channel to poll a mailbox where basically both these situations can occur, I am looking for a means to use either MailMessage OR MailAttachment-1, depending on what is present.
So far I only know of ways to hard code the source attachment which will cause the cc to fail forever if a wrong message hits the inbox.
I have thought of a workaround, polling the messages from the mailbox without using any module chain, sending them to a file receiver and picking them up again with a file sender that has "archive errorneous messages" set. But this does not look like a nice solution to me at all.
Any ideas how to solve that are highly welcomed!
Thanks and cheers!
Stefan

Hi Francesco,
two follow-up questions:
Can your module cope with an attachment that is not there (as mentioned I might receive messages with "MailMessage" OR "MailAttachment-1" set - never both...)?
Just out of curiousity: is there a possibility to process more than one attachment in the Integration Engine (routing, mapping, ...) from one XI message?
Cheers!
Stefan

Similar Messages

Is there a way to send a message with a photo attached using imessages. I am not able to send a photo to one of my contacts because I am sending the contact a message text messages. I don't want to send contacts text messages. I want to send them iMe

Is there a way to send a message with a photo attached using imessages. I am not able to send a photo to one of my contacts because I am sending the contact a message text messages. I don't want to send contacts text messages. I want to send them iMessages.

Kolyei, sorry for the late reply.
Have your brother create a contact in his phone for himself. Inside his own contact, have him add his phone number and his iCloud address.
Settings > Messages > Send & Receive Have your brother select both his phone number and email addresses where he would like to receive iMessages.

How do I process messages with status = "Holding"

Hi,
How do I process messages with status = "Holding" from the RWB-Message Monitoring - Adapter Engine?
I did a quick scan for records with errors in the same queue (ConversationID), but could not find any.
I tried to cancel the one with the smallest sequential number, but I got the error - "Unable to cancel 1 of 1 messages; update the status"
Please help.
Thanks
Sudheer

Hi,
"Holding comes into play when ur scenario is having multiple inbound interfaces and you checked "Maintained order at runtime"in interface determination in ID. Suppose message will hit first inbound interface once it is successful then it will hit second inbound interface. If first inbound interface fails then most of the message will be in "Holding" status depends upon XI AF queues ID.
I did a quick scan for records with errors in the same queue (ConversationID), but could not find any.
You will not find bcoz of AE archiving settings.
Try to check the with business guys, whether they need the order of processing. If not the case try to Uncheck the box "Maintain Order at runtime".
Regards,
Rao.Mallikarjuna

Hi! Just got my new ihpone 4 yesterday, but i'm having issues in texting a specific contact. sending sms or iMessages works perfectly fine with all my contacts apart from 1,which is even using my same network, though i can call it and receive sms from it.

Hi! Just got my new ihpone 4 yesterday, but i'm having issues in texting a specific contact. sending sms or iMessages works perfectly fine with all my contacts apart from 1,which is even using my same network, though i can call it and receive sms from it. What could the problem be?

My Quad is as quiet with 10.4.5 as it was on arrival Jan 31, with 10.4.2
Altivec Fractal Carbon gives the CPU too much chance to cool down. I've got other ways to drive the CPU to sustained 100% load. Yes, the fans speed up, but it's still pretty quiet. I've run it at 100% for hours.
I like the idea of taking things gradually. If you can wait a few days before making big changes, it can make things much easier. 3-4 weeks is very conservative, but great if you have that much patience.
My Quad has been up full-time since I got it. Works perfectly.
Quad G5 2.5Ghz 4.5GB 2x250G, PB 15" 1.5Ghz,80G,1.5G Mac OS X (10.4.5)

Send bulk mail in oracle apps 11i with pdf/Xls attachment

hi,
I have a task how can i send bulk emails in one go ( aprrox 150-200 emails in one go) in oaracle apps 11 with attachment pdf/xls
thanks

Duplicate post.
how to send bulk mail in oracle apps 11i with pdf/Xls attachment
Re: how to send bulk mail in oracle apps 11i with pdf/Xls attachment

How to find a routine with it's technical name

Hello!
I am wondering how to find a routine with it's technical name (e.g. "ROUT 7QAXE7SDXIVW4BJ2S2UL3HLAS" as shown in the error message in a transport log).
So I would like to find out, where this routine is located (w.g. which characteristic/key figure in which transfer/update rule).
Any ideas welcome. Thanks, Thomas

Hi Thomas,
You can try the following:
Look up table <b>RSUPDROUT</b>with the GUID of your routine (like 7QAXE7SDXIVW4BJ2S2UL3HLAS)in the ABAP Code ID field selection. This will show you the InfoObject it is created on, and the GUID of the update rules. If you click on the Check Table button, you can find out the data target and InfoSource of the Update Rule.
In table <b>RSAROUTT</b>you can again use the GUID of your routine to check the description assigned to the routine during its creation.
I am not sure if this works for the routines of transfer rules....still checking it and will update if anything turns up.
Hope this helps...

Message with a large attachment will not copy to SENT folder...what can I do to correct?

After sending a message with a large attachment, I receive an error message that the message did not copy over into the SENT file. It allows me to retry, which does not correct the problem. Ultimately, I have to 'X" out of the message without knowing for sure if the message was sent.

Well that really leaves one thing.
Create an exception in your Anti virus program to exclude the Thunderbird profile folder from on access scanning.
Locate your profile folder by going to the Thunderbird help menu and opening the troubleshooting entry and clicking on the show folder button. Windows explorer will open in your profile folder.
There have been issues with slowness and scripts timing out recently caused by scanning, I am sort of hopeful this is another manifestation.
Basically it takes an Anti virus program some minutes to scan a 1Gb file and I think what is happening is Thunderbird tried to update the file, the AV starts scanning because the file has been opened and after that Thunderbird just gives up.

How do I write harmonies with different note values?

I'm new to GarageBand and have been working with the score on the software grand piano. At first, I'll write a melody line and then go back to add harmony. When I try to add a harmony that has a different rhythm, GarageBand automatically changes the melody to match the rhythm of the harmony. I'm trying to write the parts in the same staff so that the piano part can all be printed on the same page. Any thoughts/help on how to write the piece with different rhythms in one measure?

Have you tried to click the clef to get two lines of notation? I enter the chords in the bass clef line, if I need a different rhythm, for example: Or make the edits in piano roll.

HT204053 I have one apple ID for purchases and then my mobile me ID where I use for email. So I have set my cloud with my mobile me name, while keeping my purchases the original name. Will my purchases be recognized as purchases when backup is finished.

I have one apple ID for purchases and then my mobile me ID where I use for email. So I have set my cloud with my mobile me name, while keeping my purchases the original name. Will my purchases be recognized as purchases when backup is finished.

Welcome to the Apple community.
So long as you are logged into the iTunes Store, using the correct ID and password (settings >store), then you will always have access to your apps, books, music, TV shows etc etc bought via the iTunes Store on that account.

How can i share documents with different users on the same mac?

How can i share documents with different users on the same mac?

Shared how? The other users can read the documents or you all can read and write the documents?
The first is easy just place the documents in /Users/Shared anyone can access the files there and the other users will be able to read them.
The second is a bit trickier.

How to install Virtual Keyboard with Different language ?

HI,
How to install Virtual Keyboard with Different language (Arabic) in MacBook Pro ( Mac OS X v10.5.8 Leopard).
Thanks,

How to install Virtual Keyboard with Different language (Arabic) in MacBook Pro ( Mac OS X v10.5.8 Leopard).
What are you talking about exactly?
OS X comes with a virtual keyboard already. It is called Keyboard Viewer. You activate it by going to system prefs/international/input menu and checking its box (plus the box for Show Input Menu in Finder). At the same time you can check the boxes for the Arabic keyboard layouts.
You can then select the Arabic keyboard layouts and the Keyboard Viewer from the "flag" menu at the top-right of the Finder.
Let us know if you have further questions. If you are talking about some specific non-Apple app, could you provide the url?

How to Post XML Messages with SOAP Headers to a Trading Partner URL

Hi All,
Greeting to the Oracle B2B Community. We are currently working on how to post a Custom XML Message with SOAP Headers to a Trading Partner URL. I would really appreciate if anybody could provide me some inputs or links to some documentation on how to achieve the above requirement. The details are below:
1. Our Internal Application generates a Flat File (PO Extract).
2. The Extract then needs to be transformed to an XML Message. We are planning to use BPEL to do the transformation to XML Message.
3. Once it is transformed to an XML message it needs to be posted to the Trading Partner URL as an HTTP Post and with SOAP Headers.
We are planning to use B2B to do the posting but I am not sure on how to do the set-ups and what all parameter files in B2B needs to be updated in order to achieve the same. Also it is mandatory that we send SOAP Headers in the XML Message.
Thanks In Advance for your help.
Regards,
Dibya

Hello Dibya,
As you are already doing the transformation from Flat file to XML in BPEL which is typically the capability of B2B, please use the Soap binding in BPEL to send the document to Trading partner.
Rgds,Ramesh

How to work on SDK with SAP B1 2005

hi all,
its too urgent, if you have any information about it, kindly help me.
1. i need some details related to SDK. what are the tools needed for working on SDK with SAP B1 2005,
2. how to get the "microsoft visual studio" for writing code for sdk.is there any seperate tool available with SDK for that or we have to use the general " microsoft visual studio" for VB and VC++.
3. how to work on Screen painter add-on, able to design the forms,but how and where to write the code to make it work, or is there any tool kit for generating the code.
4. pls give the link in the SAP portal for downloading the " tools and software needed for working on SDK with SAP B1 2005.
if you have any tools, software and guide files related to sdk kindly please send me to my gmail address " [email protected] ".
it is very urgent, if you have any resources regarding this then kindly send me as soon as possible.
regards
sandip

Sandip,
The forum that you have posted your question in is for questions related to the SAP Business One Integration for SAP NetWeaver. Your question is SDK related and should be posted in the SAP Business One SDK Discussion forum.
That being said ... here are the answers to your questions ...
1. As far as the SDK goes, it does not provide an IDE. Since the API's are COM, then you can use any IDE that can communicate with COM objects such as VB6, VB.Net, C#, C++, etc.
2. As stated above, the SDK does not provide an IDE. You would need to purchase one or you can get a free one from Microsoft on there website such as Visual Basic 2005 Express Edition.
3. The Screen Painter is an SAP tool (independant of any IDE) that allows you to graphically create new SAP Business One looking forms and then save them to an XML format. You would then in your code use the LoadBatchActions method to load your XML form. Documentation on the Screen Painter and the LoadBatchActions method is in the SAP Business One SDK Help Center Documentation that comes with the SDK as well as there is eLearning available for the SDK on this portal as well as the SAP PartnerEdge Portal if you are an SAP Business One partner.
4. If you are an SAP Business One partner and have an "S" number, you can log into the SAP PartnerEdge Portal and then under SAP Business One and "Installations & Updates" you can download the SAP Business One product as the SDK installation is part of the overall installation package. If you are not a partner you would need to contact your local SAP Business One sales representative.
Other tools available that work with the SAP Business One SDK are located on the SDN Portal under this link ...
SAP Business One Tools [original link is broken]
HTH,
Eddy
P.S. please give points for helpful answers!

How to cancel processed messages with acknowledgement waiting status

Hi All,
Messages processed successfully in Integration Server but messages still waiting for acknowledgement. I want to cancel these messages.Will u please let me know how to do delete these messages.I already canceled messages with status to be delivered in Integration Engine and Adapter Engine. But in SXMB_MONI, messages are processed successfully with waiting status.Please suggest how we need to cancel them.
Please Suggest some possible solution.
Regards,
Kanisha Sharma
Edited by: kanisha on Jul 2, 2010 8:28 AM

Hi,
Thanks for your reply.Yes it is an IDOC based scenario. But Idoc is in outbound side. Idoc processed successfully in ERP as well as PI processed successfully to MDM.Messages processed successfully in SXMB_MONI but once imported in MDM IS, then acknowledgement will be send to PI.My issue is:- MDM server is down and i want to cancel these messages.
Please suggest
Regards,
Kanisha Sharma

Sending messages with ipad impossible:user name or password incorrect

Can't send messages with my IPAD.
I'm tell that " Username or password for smtp:[email protected]@smtp.live.com is incorrect
I need a clue
Thanks

Hello mipage,
For that error you would need to make sure that the password is correct in Settings > Mail, Contacts, Calendars and look at the outgoing server settings. If you are unsure of what it should be, then the easiest way is to remove the email account and add it back in to add the correct settings. For more information, take a look at the article below
Get help with Mail on iPhone, iPad, and iPod touch
https://support.apple.com/en-us/TS3899
Regards,
-Norm G.

Email sender cc: how to work on messages with different XI attachment names

Similar Messages

Maybe you are looking for