Email using VB
I just want to be able to email jpegs I just exported from indesign I have a script that will do the emailing but it does not work from in Indesign. I can call the other script but it is still using indesign and there for does not work. I want it to work using one button to export and email rather than have to open out attach and send. Can someone help
Can I run or call another windows .vbs outside of iD
or can indesign do it.
Thank in advance
Aloha Daniel
NEVER MIND....
The VBScripting doesn't work the same way as JavaScript does. I get errors when I tested this.
Use DoScript. I do this all the time with JS.
Set myInDesign = CreateObject("InDesign.Application.CS3")
myInDesign.DoScript ScriptName, idScriptLanguage.idVisualBasic
David
Similar Messages
-
Loss of sending email using WIFI
As of this morning 8-20-08, after updating to 2.02, I no longer am able to send emails using my own wireless network. Previously this was no problem. Neither Fido or Apple have any idea of what I am talking about. Fido washed their hands as they do not support WIFI. How convenient, they sell the phone and charge for the service but do not support it. Videotron, my ISP, thinks the issue is my wireless router but I can send via gmail so that's out. I resovled the problem by configuring my accounts to use my gmail smtp server as a second option and now the spinning wheel is short lived and messages are sent.
I'm sorry to say that I had fallen for all the hype about Apple but truth is they are but a Microsoft wannabe.
DisinchantedSo here's the wierd thing.
I was having the same problems. Set up SMTP for Videotron when at home using relais.videotron.ca SMTP with no authenticationon port 25 & all was good in the world. However when I went out, bang. Nothing. Couldn't send a mail for love nor money.
Thought aboutit & changed settings to use relais.videotron.ca SMTP, but this time using authentication of vltl** / password credentials with no SSL (Videotron doesn't use SSL) and again everything was fine. Of course, when I got home again, bang. Everything fell over & no more mail sending foe me!
So I figure, when I'm at home I'm on my trusted network at port 25, I don't need authentication and all is good, but when I'm out i'm seen as potential SPAM by port 25 on videotron & get blocked.
Tried using port 587 instead when for both home & mobile but had no luck either.
Then a strange thing happened. I'd resolved to having to set up 2 SMTP servers on my iPhone & switching between the two based on where I was. Pain in the a**, but there's always a trade off for early adopter technology So I set up my primary SMTP to use port 25 with no authentication, and a secondary server to use the same relais.videotron.ca outgoing server, but this time WITH authentication using vltl** \ password credentials.
After a walk to the shop when I'd been on my secondary SMTP server (successfully sending & recieving) I came home & inadvertantly forgot to swith back to my primary SMTP. Recieved a mail & then responded with no problem!
Net result, I now have a permanently switced off primary server & a permanently switched on secondary server which uses relais.videotron.ca details with vltl** \ password authentication credentials active (like I did on my old silver iPhone) & all is good in the world, both at home & out mobile, both for sending & recieving!
Will field test some more tomorrow but it may be a 2.0.2 bug where ther primary server details fcuk up whereas the secondary server details are stable.
So long as it works, who cares!
Jof -
Reg: sending an email using report server
Hi,
i am using the below code to send an email using the report server.
When send button Click:
DECLARE
PL_ID ParamList;
repid REPORT_OBJECT;
v_rep varchar2(100);
rep_status varchar2(20);
l_host_name varchar2(50);
l_port_num varchar2(10);
l_server_name varchar2(50);
l_month_name varchar2(20);
l_from varchar2(50);
l_to varchar2(50);
l_cc varchar2(50);
l_property varchar2(1000);
l_sub_out varchar2(200);
l_sub varchar2(400);
L_BODY VARCHAR2(1000);
l_email_dir varchar2(50);
BEGIN
l_sub:=:block1.number||' '||replace(replace(:block1.desc,'&','ampersand'),'''','$quote');
if length(l_sub) >150 then
l_sub_out:=substr(l_sub,0,150);
else
l_sub_out:=l_sub;
end if;
l_host_name := (i used my host ip address local host);
l_port_num := '8889';
l_email_dir := 'C:\forms\';
l_from := [email protected];
l_cc := [email protected];
L_BODY:=' Please refer to the attached abc Report';
repid := find_report_object('PRINT_REPORT');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,'abc');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,MAIL);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,l_server_name);
go_block('abc_MAIL_TO');
first_record;
if :abc.email_address is not null then
loop
l_to:=:abc.email_address;
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER, 'paramform=no DISTRIBUTE=YES DESTINATION='||l_email_dir||'test.xml'||' '||
' p_2='|| TO_CHAR(:control.sessionid)||' '||'P_ID='||TO_CHAR(:block1.ID)||' '
||'P_LIST_TYPE='||'A'||' '
||'DISTRIBUTE=YES DESTINATION=test.xml'||' '
||'P_FROM='||''''||l_from||''''||' '
||'P_SEND='||''''||l_to||''''||' '
||'P_CC='||''''||l_cc||''''||' '
||'P_FILE='||'C:\testfile.txt'||' '
||'p_email_path='||l_email_dir||' '
||'P_BODY='||''''||l_body||''''||' '
||'P_NUM='||''''||'Email report: '||l_sub_out||'''');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
null;
ELSE
message(rep_status);
message('Error when sending email to: '||l_to);
END IF;
if :system.last_record='TRUE' then
exit;
else
next_record;
end if;
end loop;
end if;
message ('Mail has been sent.');
END;
In the report:
I created all the required parameters and i wrote a trigger as
function AfterPForm return boolean is
dst_file text_io.file_type;
l_email_dir varchar2(50);
begin
dst_file := text_io.fopen(:p_email_path||'test.xml','w');
text_io.putf(dst_file, '<destinations>'||chr(13));
text_io.putf(dst_file, '<mail id="ex1" '||chr(13));
text_io.putf(dst_file, 'from="&P_FROM"'||chr(13));
text_io.putf(dst_file, 'to="&P_SEND"'||chr(13));
text_io.putf(dst_file, 'cc="&P_CC"'||chr(13));
text_io.putf(dst_file, 'subject="&<P_NUM>">'||chr(13));
text_io.putf(dst_file, '<body srcType="text">'||chr(13));
text_io.putf(dst_file,'<![CDATA>'||chr(13));
text_io.putf(dst_file, '</body>'||chr(13));
text_io.putf(dst_file, '<foreach>'||chr(13));
text_io.putf(dst_file, '<attach format="pdf" name="report.pdf" srcType="report" instance="all">'||chr(13));
text_io.putf(dst_file, '<include src="mainSection"/>'||chr(13));
text_io.putf(dst_file, '</attach>'||chr(13));
text_io.putf(dst_file, '</foreach>'||chr(13));
text_io.putf(dst_file, '</mail>'||chr(13));
text_io.putf(dst_file, '</destinations>'||chr(13));
text_io.fclose(dst_file);
return (TRUE);
end;
Then after compilation i click the button send. Then i got the message as
Mail has been sent to [email protected].
But i didn't receive any mail.
then i check the report job id. It was showing job was successful .
And i check whether the test.xml file was created or not. It has created the test.xml file as below:
<destinations>
<mail id="ex1"
from="&P_FROM"
to="&P_SEND"
cc="&P_CC"
subject="&<P_NUM>">
<body srcType="text">
<![CDATA Please refer to the attached abc Report]>
</body>
<foreach>
<attach format="pdf" name="report.pdf" srcType="report" instance="all">
<include src="mainSection"/>
</attach>
</foreach>
</mail>
</destinations>
I have 2 machines having dev 10g. one machine is working fine with this code. but in my machine it was not working.
Do any one of you had a solution for my case.
Thanks in advance.
Edited by: user648380 on Dec 29, 2009 5:59 PMSorry to all.
I made a mistake in the from email address.
Instead of gmail.com i had given gmail,com
I am really sorry about it. -
How can I send email using two different email address that both link back to my one exchange account on my Ipad mini?
On my PC I simply have a master return email address and use a POP for the secondary address. Both are through the one exchange account without a problem. I need to be able to do the same on my Ipad.Ah, I should have made that clear. My domain didn't come from google. It was purchased at and is hosted at dreamhost, but I haven't used their email servers in years - I just route everything through gmail. I actually have a bunch of domains (with websites).
Gmail has an option that lets someone with custom domains send (and receive) email through gmail using the custom domain once Google confirms proper ownership of the domain (to prevent spammers and such). Gmail has a setting for "send email as" which allows gmail to be sent using a custom domain as the sender. I'm pretty sure Apple's old mobileme had this feature too, but I didn't use it. -
IPhone cannot send email using Yahoo account. iPhone no envia correo Yahoo.
Hi Everyone,
I just got my iPhone from Movistar Venezuela and I've found I'm unable to send email using my Yahoo account. However, I can receive Yahoo email just fine (paid $20 for Mail Plus subscription), my GMail account can send and receive perfectly, and I can go surfin' Safari with no problems too.
The error message I get is "Cannot send mail: an error occurred while delivering this message". I called Movistar Customer Support and they said everything was fine on their end...
In typical Apple fashion, the error message is so simple I have no idea where the problem is. Does anyone know how can I get more information and how to solve this annoying problem? My Yahoo account is actually my primary account...
Thanks in advance!
Saludos a todos,
Acabo de comprarme un iPhone de Movistar en Venezuela y me encuentro sin poder enviar emails con mi cuenta Yahoo. Sin embargo, si puedo recibir correo Yahoo bien (pague $20 por mi suscripcion a Mail Plus), mi cuenta de GMail si puede enviar y recibir email sin problema y puedo navergar con Safari sin ningun problema.
El mensaje de error que recibo es el siguiente": "No se puede enviar correo: se ha producido un error al enviar el mensaje". Llame a Atencion al Cliente de Movistar y me dijeron que no habia ningun problema con mi linea o con su servicio de datos...
Como tipica cosa Apple, el mensaje de error es tan simple que no tengo NI IDEA de cual es el problema. Alguien mas ha sufrido este problema? Sabe alguien como puedo obtener mas informacion de este error y como solucionarlo? Lamentablemente, mi cuenta Yahoo es mi correo principal...
Gracias de antemano!Creo que resolvi el problema, temporalmente.
1) Borra tu cuenta
2) Vuelvela a crear
3) Ve a Ajustes
4) Ve a Mail Contactos Calendarios
5) Ve a la cuenta problematica
6) Ve a SMTP
7) Anadir nuevo
8)
Nombre servidor: smtp.mail.yahoo.com
Nombre de usuario: no dejar vacio
Contrasena: no dejar vacio
Usar SSL: si
Autenticacion: Contrasena
Puerto del Servidor: 25
Lo consegui de aqui: http://www.emailaddressmanager.com/tips/mail-settings.html
Dime que tal te funciona.
I think I solved the issue, temporarily at least
1) Delete account
2) Create again
3) Go to settings
4) Go to Mail, Contacts, Calendars
5) Open problematic account
6) Go to SMTP
7) Add a new server
8)
Name: smtp.mail.yahoo.com
User name: do not leave blank
Password: do not leave blank
SSL: Yes
Autentication: Password
Port: 25
I got this info from: http://www.emailaddressmanager.com/tips/mail-settings.html
Let me know how this works -
Cannot Access Email Using WiFi
Help Me Please:
I too have a Verizon Domain account. I also have a Verizon landline account. My internet provider is TWC. Since 9/17 I have been unable to access my Verzion email account using any type of wifi. If I use an LTE connection on my phone, etc. then I can access my email using my normal email client (Apple Mail). When this started I could not even sign in to my Verizon accounts, but that has resolved itself! I can now sign in directly to Verizon server to see my email there. So my email account works, but I can only use it by signing in directly to My Verizon. I have spent hours every day trying to get this resolved. It is a Verizon issue and only they can resolve. Please help me or direct me to who can help. I see other posts for the same issues, starting at the same time my did. If this does not get fixed or some type of valid explanation I too will be selling my Verizon stock (retired employee) and moving on.
Error Message Examples:
The connection to the server “smtp.verizon.net” on port 465 timed out. Select a different outgoing mail server from the list below or click Try Later to leave the message in your Outbox until it can be sent.
INITIATING CONNECTION Sep 24 12:32:42.220 hostop.verizon.net -- port:995 -- socket:0x0 -- thread:0x60800007aa80
INITIATING CONNECTION Sep 24 12:32:42.219 host:smtp.verizon.net -- port:465 -- socket:0x0 -- thread:0x608001a78380
All connection attempts fail using wi-fi.
All settings are correct
All passwords are correctHi otthouse,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal. -
TS3899 issues sending email using my gmail account on my new iphone4s.
so i was having issues sending email using my gmail account on my new iphone4s. i called my provider, att - to fix the issue, mine anyway, under settings - general - reset - reset network connections. fixes the send issue. releases all of the other junk that was left on your old phone.
Hi Jari,
Thanks to reply me.
There is an workspace details where user solve that problem but now i have troed to access that workspace but its not working .i have cofusion how can i do this where i put
apex_mail.send(
p_to => v_recipient_list
, p_from => v_from_list
, p_subj => 'Hello world'
, p_body => v_body
, p_replyto => null);
this package
and how to and where set SMTP of Gmail and i don't know about gmail SMTP Server Specification
i ahve jus create a form with
P1_TO Text Field
P1_SUBJECT Text Field
P1_FILE_BRE File Browse...
P1_COMMENT Textarea
Please guid me...how can i do that step by step
Thanks -
Reg : Issue for Sending of external email using SO_OBJECT_SEND
There is one issue while sending external email using SO_OBJECT_SEND functional module.
1. The body of the mail is also included as attachment.
I want to avoid the same.
Please anyone can give the solution.hi check this example ,
Sending mail with attachment report in Background
Content Author: Fernando Faian
I have read the hint about "Sending mail with attachment report".
It's great, but how can I make this function work in background??
I had that needed last year too. See attachment a function group with two functions. The second one has that functionality to send email or fax (SAP office) with attachment objects in background job using SO_ATTACHMENT_INSERT function.
Pay attention because its working with output list from spool converted to pdf.
=================================================================================
z_send_email_fax_global
FUNCTION-POOL z_gfaian_mail_fax. "MESSAGE-ID ..
WORK TABLE AREAS
TABLES: tsp01.
INTERNAL TABLES
DATA: lt_rec_tab LIKE STANDARD TABLE OF soos1 WITH HEADER LINE,
lt_note_text LIKE STANDARD TABLE OF soli WITH HEADER LINE,
lt_attachments LIKE STANDARD TABLE OF sood5 WITH HEADER LINE.
DATA: lt_objcont LIKE STANDARD TABLE OF soli WITH HEADER LINE,
lt_objhead LIKE STANDARD TABLE OF soli WITH HEADER LINE.
DATA: pdf_format LIKE STANDARD TABLE OF tline WITH HEADER LINE.
TYPES: BEGIN OF y_files,
file(60) TYPE c,
END OF y_files.
DATA: lt_files TYPE STANDARD TABLE OF y_files WITH HEADER LINE.
DATA: l_objcont LIKE soli OCCURS 0 WITH HEADER LINE.
DATA: l_objhead LIKE soli OCCURS 0 WITH HEADER LINE.
STRUCTURES
DATA: folder_id LIKE soodk,
object_id LIKE soodk,
link_folder_id LIKE soodk,
g_document LIKE sood4,
g_header_data LIKE sood2,
g_folmem_data LIKE sofm2,
g_header_data LIKE sood2,
g_receive_data LIKE soos6,
g_ref_document LIKE sood4,
g_new_parent LIKE soodk,
l_folder_id LIKE sofdk,
v_email(50).
DATA: hd_dat like sood1.
VARIABLES
DATA: client LIKE tst01-dclient,
name LIKE tst01-dname,
objtype LIKE rststype-type,
type LIKE rststype-type.
DATA: numbytes TYPE i,
arc_idx LIKE toa_dara,
pdfspoolid LIKE tsp01-rqident,
jobname LIKE tbtcjob-jobname,
jobcount LIKE tbtcjob-jobcount,
is_otf.
DATA: outbox_flag LIKE sonv-flag VALUE 'X',
store_flag LIKE sonv-flag,
delete_flag LIKE sonv-flag,
owner LIKE soud-usrnam,
on LIKE sonv-flag VALUE 'X',
sent_to_all LIKE sonv-flag,
g_authority LIKE sofa-usracc,
w_objdes LIKE sood4-objdes.
DATA: c_file LIKE rlgrap-filename,
n_spool(6) TYPE n.
DATA: cancel.
DATA: desired_type LIKE sood-objtp,
real_type LIKE sood-objtp,
attach_type LIKE sood-objtp,
otf LIKE sood-objtp VALUE 'OTF', " SAPscript Ausgabeformat
ali LIKE sood-objtp VALUE 'ALI'. " ABAP lists
CONSTANTS
CONSTANTS: ou_fol LIKE sofh-folrg VALUE 'O',
c_objtp LIKE g_document-objtp VALUE 'RAW',
c_file_ext LIKE g_document-file_ext VALUE 'TXT'.
=================================================================================
z_send_email_fax2
FUNCTION z_faian_mail_fax2.
""Interface local:
*" IMPORTING
*" REFERENCE(SRC_SPOOLID) LIKE TSP01-RQIDENT
*" REFERENCE(FAX_MAIL_NUMBER) TYPE SO_NAME
*" REFERENCE(HEADER_MAIL) TYPE SO_OBJ_DES
*" REFERENCE(OBJECT_TYPE) TYPE SO_ESCAPE
*" TABLES
*" LT_BODY_EMAIL STRUCTURE SOLI
*" EXCEPTIONS
*" ERR_NO_ABAP_SPOOLJOB
Fist part: Verify if the spool really exists
SELECT SINGLE * FROM tsp01 WHERE rqident = src_spoolid.
IF sy-subrc NE 0.
RAISE err_no_abap_spooljob. "doesn't exist
ELSE.
client = tsp01-rqclient.
name = tsp01-rqo1name.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
EXPORTING
authority = 'SP01'
client = client
name = name
part = 1
IMPORTING
type = type
objtype = objtype
EXCEPTIONS
fb_error = 1
fb_rsts_other = 2
no_object = 3
no_permission = 4
OTHERS = 5.
IF objtype(3) = 'OTF'.
desired_type = otf.
ELSE.
desired_type = ali.
ENDIF.
CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
EXPORTING
rqident = src_spoolid
desired_type = desired_type
IMPORTING
real_type = real_type
TABLES
buffer = l_objcont
EXCEPTIONS
no_such_job = 14
type_no_match = 94
job_contains_no_data = 54
no_permission = 21
can_not_access = 21
read_error = 54.
IF sy-subrc EQ 0.
attach_type = real_type.
ENDIF.
CALL FUNCTION 'SO_FOLDER_ROOT_ID_GET'
EXPORTING
owner = sy-uname
region = ou_fol
IMPORTING
folder_id = l_folder_id
EXCEPTIONS
OTHERS = 5.
fill out informations about the header of the email
CLEAR: g_document.
g_document-foltp = l_folder_id-foltp.
g_document-folyr = l_folder_id-folyr.
g_document-folno = l_folder_id-folno.
g_document-objtp = c_objtp.
g_document-objdes = header_mail.
g_document-file_ext = c_file_ext.
g_header_data-objdes = header_mail.
CALL FUNCTION 'SO_DOCUMENT_REPOSITORY_MANAGER'
EXPORTING
method = 'SAVE'
office_user = sy-uname
IMPORTING
authority = g_authority
TABLES
objcont = lt_body_email
attachments = lt_attachments
CHANGING
document = g_document
header_data = g_header_data
EXCEPTIONS
OTHERS = 1.
folder_id-objtp = l_folder_id-foltp.
folder_id-objyr = l_folder_id-folyr.
folder_id-objno = l_folder_id-folno.
object_id-objtp = c_objtp.
object_id-objyr = g_document-objyr.
object_id-objno = g_document-objno.
link_folder_id-objtp = l_folder_id-foltp.
link_folder_id-objyr = l_folder_id-folyr.
link_folder_id-objno = l_folder_id-folno.
REFRESH lt_rec_tab.
CLEAR lt_rec_tab.
lt_rec_tab-sel = 'X'.
lt_rec_tab-recesc = object_type. "This field for FAX/MAIL
lt_rec_tab-recnam = 'U-'.
lt_rec_tab-deliver = 'X'.
lt_rec_tab-not_deli = 'X'.
lt_rec_tab-read = 'X'.
lt_rec_tab-mailstatus = 'E'.
lt_rec_tab-adr_name = fax_mail_number.
lt_rec_tab-sortfield = fax_mail_number.
lt_rec_tab-recextnam = fax_mail_number.
lt_rec_tab-sortclass = '5'.
APPEND lt_rec_tab.
lt_rec_tab-recextnam = fax_mail_number.
lt_rec_tab-recesc = object_type.
lt_rec_tab-sndart = 'INT'.
lt_rec_tab-sndpri = 1.
APPEND lt_rec_tab.
lt_files-file = c_file.
APPEND lt_files.
begin of insertion by faianf01
hd_dat-objdes = header_mail.
CALL FUNCTION 'SO_ATTACHMENT_INSERT'
EXPORTING
object_id = object_id
attach_type = attach_type
object_hd_change = hd_dat
owner = sy-uname
TABLES
objcont = l_objcont
objhead = l_objhead
EXCEPTIONS
active_user_not_exist = 35
communication_failure = 71
object_type_not_exist = 17
operation_no_authorization = 21
owner_not_exist = 22
parameter_error = 23
substitute_not_active = 31
substitute_not_defined = 32
system_failure = 72
x_error = 1000.
IF sy-subrc > 0.
ENDIF.
end of insertion by faianf01
send email from SAPOFFICE
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
folder_id = folder_id
object_id = object_id
outbox_flag = outbox_flag
link_folder_id = link_folder_id
owner = sy-uname
check_send_authority = 'X'
TABLES
receivers = lt_rec_tab
note_text = lt_note_text
EXCEPTIONS
active_user_not_exist = 35
communication_failure = 71
component_not_available = 1
folder_no_authorization = 5
folder_not_exist = 6
forwarder_not_exist = 8
object_no_authorization = 13
object_not_exist = 14
object_not_sent = 15
operation_no_authorization = 21
owner_not_exist = 22
parameter_error = 23
substitute_not_active = 31
substitute_not_defined = 32
system_failure = 72
too_much_receivers = 73
user_not_exist = 35.
ENDIF.
ENDFUNCTION.
=================================================================================
z_send_email_fax
FUNCTION ZCBFS_SEND_MAIL.
""Interface local:
*" IMPORTING
*" REFERENCE(SRC_SPOOLID) LIKE TSP01-RQIDENT
*" REFERENCE(HEADER_MAIL) TYPE SO_OBJ_DES
*" TABLES
*" LIST_FAX_MAIL_NUMBER STRUCTURE SOLI
*" EXCEPTIONS
*" ERR_NO_ABAP_SPOOLJOB
DATA: vg_achou(1) TYPE n.
Fist part: Verify if the spool really exists
vg_achou = 1.
DO 60 TIMES.
SELECT SINGLE * FROM tsp01 WHERE rqident = src_spoolid.
IF sy-subrc IS INITIAL.
CLEAR vg_achou.
EXIT.
ELSE.
WAIT UP TO 1 SECONDS.
ENDIF.
ENDDO.
IF vg_achou = 1.
RAISE err_no_abap_spooljob. "doesn't exist
ENDIF.
client = tsp01-rqclient.
name = tsp01-rqo1name.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
EXPORTING
authority = 'SP01'
client = client
name = name
part = 1
IMPORTING
type = type
objtype = objtype
EXCEPTIONS
fb_error = 1
fb_rsts_other = 2
no_object = 3
no_permission = 4
OTHERS = 5.
IF objtype(3) = 'OTF'.
desired_type = otf.
ELSE.
desired_type = ali.
ENDIF.
CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
EXPORTING
rqident = src_spoolid
desired_type = desired_type
IMPORTING
real_type = real_type
TABLES
buffer = l_objcont
EXCEPTIONS
no_such_job = 14
type_no_match = 94
job_contains_no_data = 54
no_permission = 21
can_not_access = 21
read_error = 54.
IF sy-subrc EQ 0.
attach_type = real_type.
ENDIF.
CALL FUNCTION 'SO_FOLDER_ROOT_ID_GET'
EXPORTING
owner = sy-uname
region = ou_fol
IMPORTING
folder_id = l_folder_id
EXCEPTIONS
OTHERS = 5.
fill out informations about the header of the email
CLEAR: g_document.
g_document-foltp = l_folder_id-foltp.
g_document-folyr = l_folder_id-folyr.
g_document-folno = l_folder_id-folno.
g_document-objtp = c_objtp.
g_document-objdes = header_mail.
g_document-file_ext = c_file_ext.
g_header_data-objdes = header_mail.
CALL FUNCTION 'SO_DOCUMENT_REPOSITORY_MANAGER'
EXPORTING
method = 'SAVE'
office_user = sy-uname
IMPORTING
authority = g_authority
TABLES
attachments = lt_attachments
CHANGING
document = g_document
header_data = g_header_data
EXCEPTIONS
OTHERS = 1.
folder_id-objtp = l_folder_id-foltp.
folder_id-objyr = l_folder_id-folyr.
folder_id-objno = l_folder_id-folno.
object_id-objtp = c_objtp.
object_id-objyr = g_document-objyr.
object_id-objno = g_document-objno.
link_folder_id-objtp = l_folder_id-foltp.
link_folder_id-objyr = l_folder_id-folyr.
link_folder_id-objno = l_folder_id-folno.
REFRESH lt_rec_tab.
LOOP AT LIST_FAX_MAIL_NUMBER.
lt_rec_tab-recextnam = LIST_FAX_MAIL_NUMBER-LINE.
lt_rec_tab-recesc = 'U'.
lt_rec_tab-sndart = 'INT'.
lt_rec_tab-sndpri = 1.
APPEND lt_rec_tab.
ENDLOOP.
lt_files-file = c_file.
APPEND lt_files.
hd_dat-objdes = header_mail.
CALL FUNCTION 'SO_ATTACHMENT_INSERT'
EXPORTING
object_id = object_id
attach_type = attach_type
object_hd_change = hd_dat
owner = sy-uname
TABLES
objcont = l_objcont
objhead = l_objhead
EXCEPTIONS
active_user_not_exist = 35
communication_failure = 71
object_type_not_exist = 17
operation_no_authorization = 21
owner_not_exist = 22
parameter_error = 23
substitute_not_active = 31
substitute_not_defined = 32
system_failure = 72
x_error = 1000.
IF sy-subrc > 0.
ENDIF.
send email from SAPOFFICE
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
folder_id = folder_id
object_id = object_id
outbox_flag = outbox_flag
link_folder_id = link_folder_id
owner = sy-uname
TABLES
receivers = lt_rec_tab
note_text = lt_note_text
EXCEPTIONS
active_user_not_exist = 35
communication_failure = 71
component_not_available = 1
folder_no_authorization = 5
folder_not_exist = 6
forwarder_not_exist = 8
object_no_authorization = 13
object_not_exist = 14
object_not_sent = 15
operation_no_authorization = 21
owner_not_exist = 22
parameter_error = 23
substitute_not_active = 31
substitute_not_defined = 32
system_failure = 72
too_much_receivers = 73
user_not_exist = 35.
ENDFUNCTION.
=================================================================================
regards,
venkat. -
Sending email using IMAP through SMTP Port 587
Hi,
I have been sending Mail Merged email to people in organizations that I am active in, using IMAP embedded in StarOffice 5.2 (on Windows 98 Second Edition). This worked fine until a few weeks ago when I received an error message stating that AOL, as part of their anti-spam efforts, was no longer accepting third-party emails on default port 25. All third-party email must now use port 587. I looked in the IMAP dialog and in the Tools -> Options dialog, but did not see any place to change the SMTP port. The AOL error message information page had instructions for changing the port in other applications (Outlook, Eudora, etc.), but not for StarOffice. So, I have some questions:
1.Is it possible to change the port in StarOffice 5.2?
2.If not, how does StarOffice 8 send Mail Merged email? Does it use IMAP, and if so, can the port be changed?
3.Also, I like the integrated configuration in StarOffice 5.2, where database fields can be directly accessed in the Insert -> Fields -> Other dialog. In looking at the Mail Merge section in "SO8_What's New.pdf", it appears that Mail Merge in StarOffice 8 is restricted to predefined fields. Could I still access fields from my existing databases?
These is a lot of questions, but right now I am blocked from sending Mail Merged emails which is imparing communications with volunteers who are running educational programs. I appreciate any and all help that anyone can provide.Please try this out!!!!!!!!!
You can send emails using Outlook also. You can send email over Microsoft Exchange with this object (or another email server, using IMAP/POP).
Sub SendMailOutlook(aTo, Subject, TextBody, aFrom)
'Create an Outlook object
Dim Outlook 'As New Outlook.Application
Set Outlook = CreateObject("Outlook.Application")
'Create e new message
Dim Message 'As Outlook.MailItem
Set Message = Outlook.CreateItem(olMailItem)
With Message
'You can display the message To debug And see state
'.Display
.Subject = Subject
.Body = TextBody
'Set destination email address
.Recipients.Add (aTo)
'Set sender address If specified.
Const olOriginator = 0
If Len(aFrom) > 0 Then .Recipients.Add(aFrom).Type = olOriginator
'Send the message
.Send
End With
End Sub -
Sending email using URL and URLConnection
I have been having trouble trying to send an email using URL.
I have specified the mail host using: mailHost = Options.getProperty("mailHost", "mail.myisp.com");
and tried to send the email using this:
try
try
URL u = new URL("mailto:"+recipient);
URLConnection c = u.openConnection();
c.setDoInput(true);
c.setDoOutput(true);
c.connect();
PrintWriter out = new PrintWriter(new OutputStreamWriter(c.getOutputStream()));
out.print("From:\"ME\" \n");
out.print("Subject: Stuff \n");
out.print("blah blah blah");
out.close();
catch etc. . .
I recieve the email with the subject line there, but the actual body of the email is empty. Anyone know what I have done wrong? This is part of a standalone application that was turned into an .exe with jbuilder9.That worked, thanks!
Out of curious, why the surprise that it worked?
Its not that bad is it?Yeah, I didn't know that mailto: support was there either, is all. The blank line thing is just common in HTTP and sendmail so, I figured that would be the solution.
I don't know that it's bad... if it works. Generally, the JavaMail APIs are a more robust way of sending mail, but if mailto: URLs work, and it's simple mail, then I see no reason not to use it. -
Sending email using labview 8.6
I am trying to send an email using labview 8.6.But I am getting error 1172 when I try to do so.
Kindly let me know what modificatons i should do to the port an d server settings.
I have taken the code from forum only
I am posting a renamed version of it.
gmail-1 is its actual name in forum
kindly suggest me what I should do
thanks
Attachments:
gmail_labview.vi 16 KBDear sir,
I have done as you said and observed that the error is coming at the final node "smtp client-send-message"
I did not installed any .NET or any other programs.
A screen shot of the error along with the error node is attached for your reference.
thanks
Attachments:
gmail_labview_error.JPG 73 KB -
Sending email using UTL_SMTP
Dear experts,
I am trying to send an email using UTL_SMTP (i switched from UTL_MAIL to UTL_SMTP since i need to send mails with large attachments - BLOB). I am using the demo_mail package given here:
http://www.oracle.com/technology/sample_code/tech/pl_sql/htdocs/Utl_Smtp_Sample.html
While running the program I am getting an error message (from the error.log) saying:
[Mon Aug 04 14:00:21 2008] [error] [client 192.168.0.7] mod_plsql: /ns/email_p.send HTTP-404 ORA-29279: SMTP permanent error: 530 5.7.0 Must issue a STARTTLS command first. 9sm12723808qbw.6\nORA-06512: at "SYS.UTL_SMTP", line 20\nORA-06512: at "SYS.UTL_SMTP", line 98\nORA-06512: at "SYS.UTL_SMTP", line 221\nORA-06512: at "NEXTSTEP.SEND_EMAIL_HELPER", line 258\nORA-06512: at "NEXTSTEP.SEND_EMAIL_HELPER", line 119\nORA-06512: at "NEXTSTEP.EMAIL_P", line 33\nORA-06512: at line 31\n, referer: file:///C:/Documents and Settings/Mayank/My Documents/Flex Builder 3/ns5/bin-debug/main.swf
My code is as follows:
PACKAGE DECLARATION. This is the DEMO_MAIL package posted under above link (I have renamed it).
CREATE OR REPLACE PACKAGE NEXTSTEP.send_email_helper IS
----------------------- Customizable Section -----------------------
-- Customize the SMTP host, port and your domain name below.
smtp_host VARCHAR2(256) := 'smtp.gmail.com';
smtp_port PLS_INTEGER := 587;
smtp_domain VARCHAR2(256) := null;
-- Customize the signature that will appear in the email's MIME header.
-- Useful for versioning.
MAILER_ID CONSTANT VARCHAR2(256) := 'Mailer by Oracle UTL_SMTP';
--------------------- End Customizable Section ---------------------
-- A unique string that demarcates boundaries of parts in a multi-part email
-- The string should not appear inside the body of any part of the email.
-- Customize this if needed or generate this randomly dynamically.
BOUNDARY CONSTANT VARCHAR2(256) := '-----7D81B75CCC90D2974F7A1CBD';
FIRST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || utl_tcp.CRLF;
LAST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || '--' ||
utl_tcp.CRLF;
-- A MIME type that denotes multi-part email (MIME) messages.
MULTIPART_MIME_TYPE CONSTANT VARCHAR2(256) := 'multipart/mixed; boundary="'||
BOUNDARY || '"';
MAX_BASE64_LINE_WIDTH CONSTANT PLS_INTEGER := 76 / 4 * 3;
-- A simple email API for sending email in plain text in a single call.
-- The format of an email address is one of these:
-- someone@some-domain
-- "Someone at some domain" <someone@some-domain>
-- Someone at some domain <someone@some-domain>
-- The recipients is a list of email addresses separated by
-- either a "," or a ";"
PROCEDURE mail(sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
message IN VARCHAR2);
-- Extended email API to send email in HTML or plain text with no size limit.
-- First, begin the email by begin_mail(). Then, call write_text() repeatedly
-- to send email in ASCII piece-by-piece. Or, call write_mb_text() to send
-- email in non-ASCII or multi-byte character set. End the email with
-- end_mail().
FUNCTION begin_mail(sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
priority IN PLS_INTEGER DEFAULT NULL)
RETURN utl_smtp.connection;
-- Write email body in ASCII
PROCEDURE write_text(conn IN OUT NOCOPY utl_smtp.connection,
message IN VARCHAR2);
-- Write email body in non-ASCII (including multi-byte). The email body
-- will be sent in the database character set.
PROCEDURE write_mb_text(conn IN OUT NOCOPY utl_smtp.connection,
message IN VARCHAR2);
-- Write email body in binary
PROCEDURE write_raw(conn IN OUT NOCOPY utl_smtp.connection,
message IN RAW);
-- APIs to send email with attachments. Attachments are sent by sending
-- emails in "multipart/mixed" MIME format. Specify that MIME format when
-- beginning an email with begin_mail().
-- Send a single text attachment.
PROCEDURE attach_text(conn IN OUT NOCOPY utl_smtp.connection,
data IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
last IN BOOLEAN DEFAULT FALSE);
-- Send a binary attachment. The attachment will be encoded in Base-64
-- encoding format.
PROCEDURE attach_base64(conn IN OUT NOCOPY utl_smtp.connection,
data IN RAW,
mime_type IN VARCHAR2 DEFAULT 'application/octet',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
last IN BOOLEAN DEFAULT FALSE);
-- Send an attachment with no size limit. First, begin the attachment
-- with begin_attachment(). Then, call write_text repeatedly to send
-- the attachment piece-by-piece. If the attachment is text-based but
-- in non-ASCII or multi-byte character set, use write_mb_text() instead.
-- To send binary attachment, the binary content should first be
-- encoded in Base-64 encoding format using the demo package for 8i,
-- or the native one in 9i. End the attachment with end_attachment.
PROCEDURE begin_attachment(conn IN OUT NOCOPY utl_smtp.connection,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
transfer_enc IN VARCHAR2 DEFAULT NULL);
-- End the attachment.
PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
last IN BOOLEAN DEFAULT FALSE);
-- End the email.
PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection);
-- Extended email API to send multiple emails in a session for better
-- performance. First, begin an email session with begin_session.
-- Then, begin each email with a session by calling begin_mail_in_session
-- instead of begin_mail. End the email with end_mail_in_session instead
-- of end_mail. End the email session by end_session.
FUNCTION begin_session RETURN utl_smtp.connection;
-- Begin an email in a session.
PROCEDURE begin_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection,
sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
priority IN PLS_INTEGER DEFAULT NULL);
-- End an email in a session.
PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection);
-- End an email session.
PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection);
END;How should I solve the above error? Can anyone help me with my query please?
If I add the code to start TLS it still gives me an error. If I add the code
utl_smtp.command(conn,'STARTTLS');
utl_smtp.helo(conn, smtp_domain);
under email_sender_help package just before under begin_session function, it gives me an error saying:
ORA-29279: SMTP permanent error: 503 5.5.1 EHLO/HELO first. s27sm2097329qbs.12
So then if i enter the same code after:
utl_smtp.command(conn,'STARTTLS');
utl_smtp.helo(conn, smtp_domain);
It gives me an error:
ORA-29278: SMTP transient error: 421 Service not available
Message was edited by:
Monk
Message was edited by:
Monklook like rely turned off on the server..
check this.. or ask your network guys..
Go to Control Panel->Add or Remove Programs->Click on
Add/Remove Wndows Components
Check IIS check box.
Select Internet Information Service (IIS) option and click on Details button
Check whether SMTP Service is checked or not.
If not selected then select SMTP check box.
This process should be done on server.
It will help out from ORA-29278: SMTP transient error: 421 Service not available problem.
thanks -
Does any one have a sample code for sending email using IMAP ?
Hi
thank you for reading my post
I have tried to use SMTP and because of some problems i could not use it and i must use Imap (authentication required)
here is my SMTP code , does any one know how i can tune it to use Imap , or has a code snippet to send email using Imap ?
thanks
private static void postMail(String[] recipients, String subject, String message,
String from) throws MessagingException {
boolean debug = false;
class SMTPAuthenticator extends javax.mail.Authenticator
public PasswordAuthentication getPasswordAuthentication()
return new PasswordAuthentication(mail_usrname,mail_password);
//Set the host smtp address
Properties props = new Properties();
FileInputStream fis;
try {
System.out.println("Loading property file");
fis = new FileInputStream(new File("c:/email.properties"));
props.load(fis);
System.out.println("property file done");
} catch (FileNotFoundException e) {
System.out.println("file not found");
e.printStackTrace();
} catch (IOException e) {
System.out.println("can not read properties file");
e.printStackTrace();
/*props.put("mail.smtp.user", mail_usrname);
props.put("mail.smtp.host", smtpHost);
props.put("mail.smtp.port", smtpPort);
props.put("mail.smtp.starttls.enable","true");
props.put("mail.smtp.socketFactory.port", smtpPort);
// create some properties and get the default Session
Authenticator auth = new SMTPAuthenticator();
Session session = Session.getDefaultInstance(props, null);
session.setDebug(debug);
// create a message
Message msg = new MimeMessage(session);
// set the from and to address
InternetAddress addressFrom = new InternetAddress(from);
msg.setFrom(addressFrom);
InternetAddress[] addressTo = new InternetAddress[recipients.length];
for (int i = 0; i < recipients.length; i++) {
addressTo[i] = new InternetAddress(recipients);
msg.setRecipients(Message.RecipientType.TO, addressTo);
// Setting the Subject and Content Type
msg.setSubject(subject);
msg.setContent(message, "text/HTML");
System.out.println(msg.toString());
Transport.send(msg);Please try this out!!!!!!!!!
You can send emails using Outlook also. You can send email over Microsoft Exchange with this object (or another email server, using IMAP/POP).
Sub SendMailOutlook(aTo, Subject, TextBody, aFrom)
'Create an Outlook object
Dim Outlook 'As New Outlook.Application
Set Outlook = CreateObject("Outlook.Application")
'Create e new message
Dim Message 'As Outlook.MailItem
Set Message = Outlook.CreateItem(olMailItem)
With Message
'You can display the message To debug And see state
'.Display
.Subject = Subject
.Body = TextBody
'Set destination email address
.Recipients.Add (aTo)
'Set sender address If specified.
Const olOriginator = 0
If Len(aFrom) > 0 Then .Recipients.Add(aFrom).Type = olOriginator
'Send the message
.Send
End With
End Sub -
I have two servers. One is for databases (DB) with the mail server configured and the other is for SSIS without mail server. Both servers are in the same network. On the SSIS server the SSIS package exports data from the DB server table
to xls file. The file is saved in SSIS server. When I created a task to send the email (using sp_send_dbmail) to attach that file, I got the error message:
Error: Executing the query "EXECUTE [msdb].[dbo].[sp_send_dbmail]
@profile_na..." failed with the following error: "Attachment file H:\test.xls is invalid.".
Any help will be appreciated. Thanks.
A Fan of SSIS, SSRS and SSASWhere are you running this?
If its in the other server (DB) you need to use UNC path to the SSIS server folder where file resides
Also the executing account should have access to the folder as well as the file. So If you're running this from a job make sure you either provider folder and file access to sql agent job service account or create a separate proxy account with the required
permissions and configure the job to use the account
see
http://www.databasejournal.com/features/mssql/article.php/3789881/Proxy-Accounts-in-SQL-Server.htm
http://www.codeproject.com/Articles/28918/SQL-Server-Agent-Proxy
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page -
1. I am unable to attach pdfs today in Outlook/Hotmail email using my Firefox browser (27.0.1). I keep getting an error message that says, "The file is not a picture and can't be inserted inline." I do not understand why I keep getting this error message. I am not attempting to insert an image. I am selecting to Insert Files as Attachments from the drop down menu.
No matter how many times I attempt to attach various pdfs to my emails today using Firefox as my browser, I keep getting this same error message. I have cleared the cache, cleared all cookies, cleared all history, signed out of my Hotmail/Outlook account, signed back in, restarted computer, etc., to no avail. Same problem.
2. I switched to my Safari browser, and have no problem attaching pdfs in my Hotmail/Outlook email account. The pdfs are attaching perfectly as usual. My emails are being sent normally with the attachments. The attached pdfs are being received and are opening perfectly as intended.
3. Why am I unable to attach files with Firefox today? Firefox is my browser of choice and I have used it with my Hotmail/Outlook email account without any problems, till today. Please help me! Thank you!Thank you jscher2000. Yes my PDFs do contain the .pdf extension. I tried your excellent idea to utilize the drag and drop method, but I still get the same error message with PDFs. I have no problem attaching photos or Word documents with either method; just PDFs.
For further diagnostics, I started composing my email in Safari, attached all my pdfs and saved my email as a Draft. I then went to Firefox, opened the draft to continue working on it, and voila! There are all the pdfs I attached previously while in Safari. I was able to send the email with attachments through Firefox with no issues. The attachments went through and were able to be opened.
I am mystified, as Firefox has been trouble-free with my email account, and I have never had this particular issue till today. I made no changes to anything else on my computer, but I did notice very late last night that Outlook had one of those typical messages at the top of my Inbox to refresh my browser since Outlook had been updated. I refreshed and shut down for the night, and when I rebooted this morning that is when I discovered this brand new glitch with attachments. I'm assuming this has something to do their last update. -
I have BIS but can't surf, send/receive email, use apps
i have BB Curve 8520. My BIS was running smoothly (sending and receiving emails real time and surfing the net through BIS), until i noticed when i tried to reply to an email that came in, it won't send. i noticed that it's fluctuating. i was able to send the email after a few minutes... then a few minutes later, i received a replied email from my friend, and when i tried to send my reply, i wasn't able to. also, i can't surf using the browser with the "internet browser" as default. i tried using my wifi and then suddenly all my emails started coming in, all emails that were not able to go through hours ago. my big question was why do i need to turn on wifi just to receive emails. but since i had my BIS for 2 months now, i can send and receive emails and surf through BIS itself without turning on the wifi. also, i can't use any of my apps like facebook, twitter, yahoo messenger, etc. They used to work fine with BIS... but now, i have to turn on the wifi connection, so i could log in with them. aren't these supposed to be running through BIS only?
I have GPRS on top, not gprs. my carrier says i have active data plan/BIS. but under Services Status..it says Blackberry Internet Service: Connection: not connected...
so, i wiped out my BB and deleted all third party apps. when this was done, i received emails telling me "Your handheld has been registered with the wireless network" and even got "Activation Server" emails telling me that the emails that i have previously set up are now up and running. so i thought my BB is now ok.. i tried surfing, it was okay. after like about 5 minutes, it was down again. tried sending email but can't... i turned on the wifi and boom! the emails started coming in again.i have the Host Routing Tables and my Service Books in my BB. I have GPRS (not gprs) on top which means i have active BIS. i have registered my HRTs several times... and resending my service books... same thing...
the big mystery is when i turn on the wifi, the emails suddenly go through and i can send emails. i can open apps that used to only run on BIS. this is ok i guess, but i could never do any of these if i'm not connected to wifi.
my sister and i have the same BB... i removed my sim and inserted it to her BB and the BIS worked fine... i was able to surf and use apps.. but when i put my sim back on my phone, the problem still exists. i even used a different sim card that is also subscribed to BIS/data plan, and it still has the same problem... my guess is my carrier is right that my data plan is working ok and that my handheld itself has the problem...
i updated my OS, same problem.. wiped it out... used BBSAK, reinstalled OS... numerous battery pulls... same thing... i can receive the HRTs and service books, but after that can't do anything else like i used to... (send/receive emails, use apps like facebook, twitter, ym, etc., can't surf with internet browser - except when wifi is on everything else work fine even emails and apps)..
i would really appreciate your help guys.. thanks!Hi tarifiq and welcome to the BlackBerry Support Community Forums!
Can you send me a private message with your PIN so I can check this out for you?
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!
Maybe you are looking for
-
Fill in form using XML data source usable in Reader
I have a simple example of a scenario we need to solve. Different branches will fill out a form (designed in LiveCycle 8) and by entering their branch number static information will be filled in. I want to store the static infomation for all branches
-
Is there a way / app that would allow me to access my jetpack's web ui remotely from the WAN side ?
-
SQL*Loader-925: Error while uldlfca: OCIStmtExecute (ptc_hp)
Hi my table loading is failing with the floowing error. But same table is loading daily without any problem. I tried again but failed with the same message. SQL*Loader-2026: the load was aborted because SQL Loader cannot continue. SQL*Loader-925: Err
-
Dear Experts, I have created a service vendor and assigned EWT(TDS) tyeps and codes for Invoice and payment. When I do MIRO for , say, Rs 10,000 system calculates & posts TDS correctly. (TDS amount being, say, Basic:-100; Surcharge 10; Ecess 2 and HE
-
can anyone tell me what's going with my macbook pro or my macbook's charger. i notice these couple days, everytime i use my macbook pro either light or heavy using with charger on the machine/macbook on the bottom is so hot and make very heavy noise.