Embedded OC4J (Jdeveloper 10.1.3.2) HTTP switch HTTPS

I need to debug some web application that switches between HTTP and HTTPS and back again. I have done all the required configuarion of the embedded OC4J to support this namely:
1. create self signed certificate
2. created a second web-site (secure-web-site.xml) that listens for https connections on another port e.g. 4443
3. added relevant <ssl-config> entry to secure-web-site.xml
4. Marked the relevant <web-app> element as shared in the secure-web-site.xml and default-web-site.xml files
I now start the embedded OC4J in jdeveloper and all is well, https and http work fine. However a different session is created for each of the web-sites the secure and the default (i.e one for the http and one for the https). I understand why since the browser treats http://www.mydomain.com:8988 and https://www.mydomain.com:4443 as separate web sites.
One Solution
~~~~~~~~~~
If my understanding is correct if I use the standard ports 80 and 443 then the browser would treat these as the same web site and only one cookie jsessionid cookie gets created and so only one session
2nd Solution
~~~~~~~~~~
If I use non-default ports like 8888 and 4443 then I can set the cookie domain in the orion-web.xml file <session-tracking cookie-domain=".mydomain.com" /> and this ensures one jsessionid cookie is shared for the whole domain and so again only one session
Unfortunately I cannot implement either solution in the embedded OC4J since for solution one no matter what I do I cannot get the embedded OC4J to listen on port 80. It always finds a conflict and chooses a different port like 1024 even though no other process is using port 80
The second solution does not work since the orion-web.xml file gets overwritten everytime I start the embedded OC4J and so I lose any updates I make.
Does anybody have any ideas how to overcome these problems? I know I could use a standalone container but then I will lose all the convenience of testing within Jdeveloper.
Many thanks.

Hi,
I'll file an ER to allow developers in JDeveloper to test http and https. What I usually do - as a work around - is to open files that are change on each start of the embedded OC4J in TextPad. TextPad asks if an opened file should be reloaded when it has been changed on the filesystem. I then say "no" and safe the opened file gain, overriding the JDeveloper changes.
Its not perfect, but much better than re-editing all the files.
Frank

Similar Messages

  • JDeveloper 10.1.3 embeded OC4J can't host Apache CXF Service.

    I use JDeveloper 10.1.3 to created a test web application, which uses Spring and Apache CXF 2.0.3 hosting a sample web service, but when the application start the following error occurs:
    [Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
    **** Unable to obtain password from principals.xml. Using default.
    D:\Program Files\Oracle JDeveloper\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\config>
    "D:\Program Files\Oracle JDeveloper\jdk\bin\javaw.exe" -ojvm "-Doracle.home=D:\Program Files\Oracle JDeveloper" -classpath "D:\Program Files\Oracle JDeveloper\j2ee\home\oc4j.jar;D:\Program Files\Oracle JDeveloper\jdev\lib\jdev-oc4j-embedded.jar" -Xverify:none -DcheckForUpdates=adminClientOnly -Doracle.application.environment=development -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config "D:\Program Files\Oracle JDeveloper\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\config\server.xml"
    [waiting for the server to complete its initialization...]
    2008-1-30 21:31:23 com.evermind.server.XMLDataSourcesConfig parseRootNode
    信息: Legacy datasource detected...attempting to convert to new syntax.
    Ready message received from Oc4jNotifier.
    Embedded OC4J startup time: 11953 ms.
    Target URL -- http://192.168.0.1:8988/wstest/servlet1
    08/01/30 21:31:31 Oracle Containers for J2EE 10g (10.1.3.0.0) initialized
    2008-1-30 21:31:38 org.springframework.web.context.ContextLoader initWebApplicationContext
    信息: Root WebApplicationContext: initialization started
    2008-1-30 21:31:38 org.springframework.context.support.AbstractApplicationContext prepareRefresh
    信息: Refreshing [email protected]1de: display name [Root WebApplicationContext]; startup date [Wed Jan 30 21:31:38 CST 2008]; root of context hierarchy
    2008-1-30 21:31:38 org.springframework.beans.factory.xml.XmlBeanDefinitionReader loadBeanDefinitions
    信息: Loading XML bean definitions from ServletContext resource [WEB-INF/applicationContext.xml]
    2008-1-30 21:31:39 org.springframework.beans.factory.xml.XmlBeanDefinitionReader loadBeanDefinitions
    信息: Loading XML bean definitions from class path resource [META-INF/cxf/cxf.xml]
    2008-1-30 21:31:39 org.springframework.beans.factory.xml.XmlBeanDefinitionReader loadBeanDefinitions
    信息: Loading XML bean definitions from class path resource [META-INF/cxf/cxf-extension-soap.xml]
    2008-1-30 21:31:39 org.springframework.beans.factory.xml.XmlBeanDefinitionReader loadBeanDefinitions
    信息: Loading XML bean definitions from class path resource [META-INF/cxf/cxf-servlet.xml]
    2008-1-30 21:31:39 org.springframework.context.support.AbstractApplicationContext obtainFreshBeanFactory
    信息: Bean factory for application context [[email protected]1de]: org.springframework.beans.factory.support.DefaultListableBeanFactory@2b6
    2008-1-30 21:31:40 org.springframework.context.support.AbstractApplicationContext$BeanPostProcessorChecker postProcessAfterInitialization
    信息: Bean 'org.apache.cxf.bus.spring.Jsr250BeanPostProcessor' is not eligible for getting processed by all BeanPostProcessors (for example: not eligible for auto-proxying)
    2008-1-30 21:31:40 org.springframework.context.support.AbstractApplicationContext$BeanPostProcessorChecker postProcessAfterInitialization
    信息: Bean 'org.apache.cxf.bus.spring.BusExtensionPostProcessor' is not eligible for getting processed by all BeanPostProcessors (for example: not eligible for auto-proxying)
    2008-1-30 21:31:40 org.springframework.beans.factory.support.DefaultListableBeanFactory preInstantiateSingletons
    信息: Pre-instantiating singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@2b6: defining beans [cxf,org.apache.cxf.bus.spring.Jsr250BeanPostProcessor,org.apache.cxf.bus.spring.BusExtensionPostProcessor,org.apache.cxf.resource.ResourceManager,org.apache.cxf.configuration.Configurer,org.apache.cxf.binding.BindingFactoryManager,org.apache.cxf.transport.DestinationFactoryManager,org.apache.cxf.transport.ConduitInitiatorManager,org.apache.cxf.wsdl.WSDLManager,org.apache.cxf.phase.PhaseManager,org.apache.cxf.workqueue.WorkQueueManager,org.apache.cxf.buslifecycle.BusLifeCycleManager,org.apache.cxf.endpoint.ServerRegistry,org.apache.cxf.endpoint.ServerLifeCycleManager,org.apache.cxf.endpoint.ClientLifeCycleManager,org.apache.cxf.transports.http.QueryHandlerRegistry,org.apache.cxf.endpoint.EndpointResolverRegistry,org.apache.cxf.headers.HeaderManager,org.apache.cxf.catalog.OASISCatalogManager,org.apache.cxf.binding.soap.SoapBindingFactory,org.apache.cxf.binding.soap.SoapTransportFactory,org.apache.cxf.binding.soap.customEditorConfigurer,org.apache.cxf.transport.servlet.ServletTransportFactory,helloWorld]; root of factory hierarchy
    2008-1-30 21:31:40 org.apache.cxf.configuration.spring.ConfigurerImpl <init>
    信息: Could not find the configuration file cxf.xml on the classpath.
    2008-1-30 21:31:41 org.springframework.beans.factory.support.DefaultSingletonBeanRegistry destroySingletons
    信息: Destroying singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@2b6: defining beans [cxf,org.apache.cxf.bus.spring.Jsr250BeanPostProcessor,org.apache.cxf.bus.spring.BusExtensionPostProcessor,org.apache.cxf.resource.ResourceManager,org.apache.cxf.configuration.Configurer,org.apache.cxf.binding.BindingFactoryManager,org.apache.cxf.transport.DestinationFactoryManager,org.apache.cxf.transport.ConduitInitiatorManager,org.apache.cxf.wsdl.WSDLManager,org.apache.cxf.phase.PhaseManager,org.apache.cxf.workqueue.WorkQueueManager,org.apache.cxf.buslifecycle.BusLifeCycleManager,org.apache.cxf.endpoint.ServerRegistry,org.apache.cxf.endpoint.ServerLifeCycleManager,org.apache.cxf.endpoint.ClientLifeCycleManager,org.apache.cxf.transports.http.QueryHandlerRegistry,org.apache.cxf.endpoint.EndpointResolverRegistry,org.apache.cxf.headers.HeaderManager,org.apache.cxf.catalog.OASISCatalogManager,org.apache.cxf.binding.soap.SoapBindingFactory,org.apache.cxf.binding.soap.SoapTransportFactory,org.apache.cxf.binding.soap.customEditorConfigurer,org.apache.cxf.transport.servlet.ServletTransportFactory,helloWorld]; root of factory hierarchy
    2008-1-30 21:31:41 org.springframework.web.context.ContextLoader initWebApplicationContext
    严重: Context initialization failed
    org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'org.apache.cxf.wsdl.WSDLManager' defined in class path resource [META-INF/cxf/cxf.xml]: Instantiation of bean failed; nested exception is org.springframework.beans.BeanInstantiationException: Could not instantiate bean class [org.apache.cxf.wsdl11.WSDLManagerImpl]: Constructor threw exception; nested exception is java.lang.ClassCastException: oracle.xml.parser.v2.DTD
    Caused by: org.springframework.beans.BeanInstantiationException: Could not instantiate bean class [org.apache.cxf.wsdl11.WSDLManagerImpl]: Constructor threw exception; nested exception is java.lang.ClassCastException: oracle.xml.parser.v2.DTD
    Caused by: java.lang.ClassCastException: oracle.xml.parser.v2.DTD
         at java.util.XMLUtils.load(XMLUtils.java:61)
         at java.util.Properties.loadFromXML(Properties.java:701)
         at org.apache.cxf.common.util.PropertiesLoaderUtils.loadAllProperties(PropertiesLoaderUtils.java:71)
         at org.apache.cxf.wsdl11.WSDLManagerImpl.registerInitialExtensions(WSDLManagerImpl.java:209)
         at org.apache.cxf.wsdl11.WSDLManagerImpl.<init>(WSDLManagerImpl.java:97)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
         at org.springframework.beans.BeanUtils.instantiateClass(BeanUtils.java:85)
         at org.springframework.beans.factory.support.SimpleInstantiationStrategy.instantiate(SimpleInstantiationStrategy.java:61)
         at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.instantiateBean(AbstractAutowireCapableBeanFactory.java:756)
         at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBeanInstance(AbstractAutowireCapableBeanFactory.java:721)
         at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:384)
         at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:251)
         at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:156)
         at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:248)
         at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:160)
         at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:287)
         at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:352)
         at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:244)
         at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:187)
         at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:50)
         at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1015)
         at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:649)
         at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:428)
         at com.evermind.server.Application.getHttpApplication(Application.java:512)
         at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:1975)
         at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:1958)
         at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.getHttpApplication(HttpSite.java:1910)
         at com.evermind.server.http.HttpSite.getApplication(HttpSite.java:427)
         at com.evermind.server.http.HttpRequestHandler.resolveApplication(HttpRequestHandler.java:395)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:437)
         at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:119)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230)
         at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33)
         at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
         at java.lang.Thread.run(Thread.java:595)
    You can following the steps in http://cwiki.apache.org/CXF20DOC/writing-a-service-with-spring.html to reproduce the error.

    But services using direct Endpoint publishing can work, following the steps in:
    http://cwiki.apache.org/CXF20DOC/a-simple-jax-ws-service.html

  • JDeveloper 10.1.3.3 and Embedded OC4J server

    This is the Embedded OC4J server on JDeveloper 10.1.3.3 I have pointed it to compile in Java SDK 1.4.2_14
    I have set up the projects datasources to use the JDBC driver ojdbc14.jar
    [Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
    **** Unable to obtain password from principals.xml. Using default.
    C:\jdev\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\config>
    C:\j2sdk1.4.2_14\bin\javaw.exe -ojvm -classpath C:\jdev\j2ee\home\oc4j.jar;C:\jdev\jdev\lib\jdev-oc4j-embedded.jar -Xverify:none -DcheckForUpdates=adminClientOnly -Doracle.application.environment=development -Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config C:\jdev\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\config\server.xml
    [waiting for the server to complete its initialization...]
    *WARNING: Code-source C:\jdev\jdbc\lib\ojdbc14.jar (from <library> in /C:/jdev/jdev/mywork/NJTransit/NJTransit-oc4j-app.xml) has the same filename but is not identical to /C:/jdev/jdbc/lib/ojdbc14dms.jar (from <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in C:\jdev\j2ee\home\oc4j.jar). If it contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader current-workspace-app.root:0.0.0.
    *Ready message received from Oc4jNotifier.
    Embedded OC4J startup time: 4421 ms.
    Target URL -- http://207.200.160.250:8988/NJTransit-NJTransit-context-root/index.jsp
    12/03/08 14:58:05 Oracle Containers for J2EE 10g (10.1.3.0.0) initialized
    My question is why is it having trouble distinguishing between ojdbc14.jar and ojdbc14dms.jar
    as a result I am getting unexpected behavior from the Application
    Declaration in my code
    int mypidm;
    String sql1 = "SELECT SPRIDEN_PIDM FROM SPRIDEN WHERE SPRIDEN_ID = UPPER(?)";
    try{
    PreparedStatement pstmt = conn.prepareStatement(sql1);
    pstmt.setString(1, studid);
    ResultSet rs;
    rs = pstmt.executeQuery();
    //mypidm = rs.getInt("SPRIDEN_PIDM");
    This part of the code drops through i.e. rs.next() always gets a false result
    while (rs.next()) //evaluates to false so mypidm is always zero.
    mypidm = rs.getInt("SPRIDEN_PIDM");
    I am thinking that these two things are related.
    Any Thoughts.

    The tables are not created by default. You can configure your persistence.xml to define how you want tables to be created. The persistence.xml properties are defined in the TopLink class, EntityManagerFactoryProvider (oracle.toplink.<essentials>.ejb.cmp3).
    Set the property, "toplink.ddl-generation" to "drop-and-create-tables" if you want them recreated every time your redeploy. Note this will delete all previous data in the tables, so make sure you do not leave this setting on when you go into production.

  • How to use the HTTP Analyzer with the embedded OC4J server?

    JDeveloper version: Studio Edition Version: 10.1.3.0.3.3412
    I have a web application, which I run in the embedded OC4J server.
    I tried to use the HTTP analyzer to inspect http requests and responses, but I could not make the analyzer work.
    I tried to setup the HTTP analyzer by looking at the help entry, but I could not make it work.
    If the HTTP analyzer works for you in the embedded OC4J server, please write the steps on how to setup the analyzer.
    (Maybe I could not make the correct settings about port numbers?)
    Thanks in advance,
    Regards,
    Turgay Zengin

    I was able to use the HTTP Analyzer by changing the proxy setting directly in Internet Options. Check the browser/proxy settings set in JDeveloper preferences and copy them to the Connections tab of Internet Options. See if that works for you.

  • JDeveloper 10.1.3.2 - Nullpointer in Embedded OC4J Preferences

    When I want to have a look at the jazn-data file holding the users and policies I'm getting the followin error in the dialog-screen:
    java.lang.NullPointerException
         at oracle.jdevimpl.xml.oc4j.jazn.PolicyPanel.onEntry(PolicyPanel.java:38)
         at oracle.ide.panels.MDDPanel.enterTraversableImpl(MDDPanel.java:926)
         at oracle.ide.panels.MDDPanel.enterTraversable(MDDPanel.java:899)
         at oracle.ide.panels.MDDPanel.mav$enterTraversable(MDDPanel.java:106)
         at oracle.ide.panels.MDDPanel$Tsl.updateSelectedNavigable(MDDPanel.java:1348)
         at oracle.ide.panels.MDDPanel$Tsl.updateSelection(MDDPanel.java:1216)
         at oracle.ide.panels.MDDPanel$Tsl.actionPerformed(MDDPanel.java:1210)
         at javax.swing.Timer.fireActionPerformed(Timer.java:271)
         at javax.swing.Timer$DoPostEvent.run(Timer.java:201)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
         at java.awt.Dialog$1.run(Dialog.java:515)
         at java.awt.Dialog.show(Dialog.java:536)
         at java.awt.Component.show(Component.java:1300)
         at java.awt.Component.setVisible(Component.java:1253)
         at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
         at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
         at oracle.ide.dialogs.WizardLauncher.runDialog(WizardLauncher.java:55)
         at oracle.ide.panels.TDialogLauncher.showDialog(TDialogLauncher.java:276)
         at oracle.jdevimpl.xml.ModalEditor.showDialog(ModalEditor.java:112)
         at oracle.jdevimpl.xml.ModalEditor.showDialog(ModalEditor.java:88)
         at oracle.jdevimpl.runner.oc4j.EmbeddedServerAdminCommand.doit(EmbeddedServerAdminCommand.java:68)
         at oracle.ide.controller.CommandProcessor.invoke(CommandProcessor.java:259)
         at oracle.ide.controller.IdeAction.performAction(IdeAction.java:541)
         at oracle.ide.controller.IdeAction$1.run(IdeAction.java:772)
         at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:789)
         at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:498)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
         at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
         at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
         at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1000)
         at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1041)
         at java.awt.Component.processMouseEvent(Component.java:5488)
         at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
         at java.awt.Component.processEvent(Component.java:5253)
         at java.awt.Container.processEvent(Container.java:1966)
         at java.awt.Component.dispatchEventImpl(Component.java:3955)
         at java.awt.Container.dispatchEventImpl(Container.java:2024)
         at java.awt.Component.dispatchEvent(Component.java:3803)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
         at java.awt.Container.dispatchEventImpl(Container.java:2010)
         at java.awt.Window.dispatchEventImpl(Window.java:1774)
         at java.awt.Component.dispatchEvent(Component.java:3803)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
    The only changes I've made in my application was unchecking the Extensions I'm not using in my application. After changing these Extensions (this is a tip regarding memory-consumption of jdeveloper) I'm getting these errors in the realm-dialog.
    Regards,
    Nathalie
    PS: I've unchecked the following extensions:
    - ADF Security 10.1.3.40.66
    - BI Beans Graph 10.1.3
    - Oracle Webcenter Preconfigured OC4J 10.1.3.2.0
    - Portlet Creation Extension 10.1.3.40.66
    - Versioning Support 10.1.3.40.66

    Hi,
    OC4J needs to be configured to support HTTP and HTTPS sessions. Because the embedded OC4J uses the default-web-app configuration during testing I am not so sure about configuring it for HTTPS. However, in this case I suggest you test it as a stand alone container in which case HTTPS configuration happen as described in the OC4J security guide.
    "How do I make the Embedded OC4J redirect http requests for secure web content to https automatically as required in the servlet 2.4 spec ?"
    I don't find this statement in my version of the Servet 2.4 spec. Can you point me to the line in the document?
    If you mean transport guarantee, then this is not exactly what you say:
    "The transport-guarantee element specifies that the communication between client and server should be NONE, INTEGRAL, or CONFIDENTIAL. NONE means that the application does not require any transport guarantees. A value of INTEGRAL means that the application requires that the data sent between the client and server be sent in
    such a way that it can’t be changed in transit. CONFIDENTIAL means that the application requires that the data be transmitted in a fashion that prevents other entities from observing the contents of the transmission. In most cases, the presence of the INTEGRAL or CONFIDENTIAL flag will indicate that the use of SSL is required."
    Servlet 2.4 spec
    This however doesn't mean automated redirect to https but says that this requires SSL, which means that a http error is thrown if https isn't used
    Frank

  • Embeded Oc4j server not starting up in Jdeveloper 10g 10.1.3.0.3

    hi,
    I have created simle hello.jsp , but i try to run it with the embedded OC4j server i get the following error .
    C:\jdk1.4\bin\javaw.exe -client -classpath C:\jdev\j2ee\home\oc4j.jar;C:\jdev\jdev\lib\jdev-oc4j-embedded.jar -Dhttp.proxyHost=172.16.233.34 -Dhttp.proxyPort=8080 -Dhttp.nonProxyHosts=local.|localhost|127.0.0.1 -Dhttps.proxyHost=172.16.233.34 -Dhttps.proxyPort=8080 -Dhttps.nonProxyHosts=local.|localhost|127.0.0.1 -Xverify:none -DcheckForUpdates=adminClientOnly -Doracle.application.environment=development -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config C:\jdev\jdev\system\oracle.j2ee.10.1.3.34.12\embedded-oc4j\config\server.xml
    [waiting for the server to complete its initialization...]
    Sep 30, 2005 6:23:17 PM com.evermind.server.XMLDataSourcesConfig parseRootNode
    INFO: Legacy datasource detected...attempting to convert to new syntax.
    Error: cannot read: java.lang.Enum
    05/09/30 18:23:23 Application: system is in state FAILED
    05/09/30 18:23:23 Error initializing server: Error initializing ejb-modules: Error loading module file:/C:/jdev/jdev/system/oracle.j2ee.10.1.3.34.12/embedded-oc4j/applications/admin_ejb.jar: Syntax error in source or compilation failed in: C:\jdev\jdev\system\oracle.j2ee.10.1.3.34.12\embedded-oc4j\application-deployments\admin_ejb\generated\MBeanServerEjbRemote_StatefulSessionBeanWrapper0.java
    Error: cannot read: java.lang.Enum
    05/09/30 18:23:24 Fatal error: server exiting
    Process exited with exit code 1.
    Can anyone help

    The 10.1.3 version of JDeveloper (and the embedded OC4J) requires JDK 5.0 to run.
    You can however set your project to work with JDK 1.4 in the project properties.

  • Oc4j server embeded in Jdeveloper 10g is not ruuning

    hi,
    1.
    I am trying to run ocrj server embede in Jdeveloper from command promt
    for which as given step in Jdevelioper handbook , i proceeded as executing
    setvars -go from directory jdev\bin , but i am getting the following error
    D:\JDev\jdev\bin>setvars -go
    Using JDeveloper installation in "D:\JDev\jdev\"
    Using JDeveloper root in "D:\JDev\"
    'findstr' is not recognized as an internal or external command,
    operable program or batch file.
    2. if i proceed next step without caring the previous step , the server is start but vanished instantly
    i am using Windows XP(sp 2) jdk 1.4
    pz can any one will guide me
    log file showing the following message
    06/02/13 20:25:11 Auto-unpacking D:\JDev\BC4J\redist\bc4j.ear...
    06/02/13 20:25:12 Auto-unpacking D:\JDev\BC4J\redist\bc4j.ear... done.
    06/02/13 20:25:19 Auto-unpacking D:\JDev\soap\lib\soap.ear...
    06/02/13 20:25:19 Auto-unpacking D:\JDev\soap\lib\soap.ear... done.
    06/02/13 20:25:19 9.0.4.0.0 Started
    06/02/13 20:26:34 9.0.4.0.0 Started
    06/02/14 18:23:07 9.0.4.0.0 Started
    06/02/14 18:23:14 Forced or abrupt (crash etc) server shutdown detected, starting recovery process...
    06/02/14 18:23:14 Recovery completed, 0 connections committed and 0 rolled back...
    06/02/14 18:23:14 9.0.4.0.0 Started
    06/02/15 09:58:49 9.0.4.0.0 Started
    06/02/15 09:58:55 Forced or abrupt (crash etc) server shutdown detected, starting recovery process...
    06/02/15 09:58:55 Recovery completed, 0 connections committed and 0 rolled back...
    06/02/15 09:58:55 9.0.4.0.0 Started
    06/02/15 10:03:58 9.0.4.0.0 Started
    06/02/15 10:03:58 9.0.4.0.0 Stopped (JVM termination)
    06/02/15 10:04:13 9.0.4.0.0 Started
    06/02/15 10:04:14 9.0.4.0.0 Stopped (JVM termination)
    06/02/15 10:41:12 9.0.4.0.0 Started
    06/02/15 10:41:13 9.0.4.0.0 Stopped (JVM termination)
    06/02/15 12:20:46 9.0.4.0.0 Started
    06/02/15 12:20:46 9.0.4.0.0 Stopped (JVM termination)
    06/02/15 12:21:02 9.0.4.0.0 Started
    06/02/15 12:21:02 9.0.4.0.0 Stopped (JVM termination)
    06/02/15 12:21:26 9.0.4.0.0 Started
    06/02/15 12:21:27 9.0.4.0.0 Stopped (JVM termination)
    06/02/15 12:21:34 9.0.4.0.0 Started
    06/02/15 12:21:35 9.0.4.0.0 Stopped (JVM termination)
    06/02/15 12:21:43 9.0.4.0.0 Started
    06/02/15 12:21:44 9.0.4.0.0 Stopped (JVM termination)
    06/02/15 12:28:23 9.0.4.0.0 Started
    06/02/15 12:28:23 9.0.4.0.0 Stopped (JVM termination)
    06/02/15 12:29:45 9.0.4.0.0 Started
    06/02/15 12:29:46 9.0.4.0.0 Stopped (JVM termination)
    06/02/15 12:30:37 9.0.4.0.0 Started
    06/02/15 12:30:37 9.0.4.0.0 Stopped (JVM termination)
    06/02/15 12:43:34 9.0.4.0.0 Started
    06/02/15 12:43:35 9.0.4.0.0 Stopped (JVM termination)
    06/02/15 13:01:43 9.0.4.0.0 Started
    06/02/15 13:01:43 9.0.4.0.0 Stopped (JVM termination)
    06/02/15 14:59:13 9.0.4.0.0 Started
    06/02/15 14:59:13 9.0.4.0.0 Stopped (JVM termination)
    06/02/15 14:59:32 9.0.4.0.0 Started
    06/02/15 14:59:33 9.0.4.0.0 Stopped (JVM termination)
    06/02/15 15:05:39 9.0.4.0.0 Started
    06/02/15 15:05:39 9.0.4.0.0 Stopped (JVM termination)
    Waiting for your response
    Rgds
    nripa

    Thaks Frank ! I did as your suggestion and in the command line the following message comes
    D:\JDev\j2ee\home>java -jar oc4j.jar
    06/02/16 10:53:01 Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)
    initialized
    I Assumed that oc4j server statrted , I test the server using the browser to connect to http://localhost:8888 i got
    You are not authorized to view this page
    You might not have permission to view this directory or page using the credentials you supplied.
    HTTP Error 403 - Forbidden
    Internet Explorer
    i checked the port number in relevent xml file
    pz if possible support me
    Rgds
    nripa

  • Problem running embeded OC4J from JDeveloper 11g TP 3

    I've just downloaded JDeveloper 11g Technical Preview 3. Unzipped it and ran.
    IDE runs ok, but when I try to run Web project on embedded OC4J, I got exceptions and the server never starts (exception text included on the bottom).
    Here is the way to reproduce the error:
    1. Create new Web Project with New Gallery wizard:
    a. New Gallery->general->projects->web project
    b. on Web Application page (step 3 of 7) choose Servlet 2.5/JSP 21.
    c. on Page Flow technology page (4 of 7) choose none
    d. don't include available libraries (5 of 7)
    e. on Web Project Profile (6 of 7) check Add JSP Page
    f. finish
    e. choose jsp name (after clicking finish a dialog pops up)
    2. Run the page
    a. select the page in Application Navigator
    b. right click on it and choose Run option
    In my case I got the following exception:
    [Starting Embedded OC4J Server using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
    C:\Documents and Settings\kazelot\Application data\JDeveloper\system11.1.1.0.22.47.96\o.j2ee\embedded-oc4j\config>
    D:\work\jdev1111\jdk\bin\javaw.exe -client -classpath D:\work\jdev1111\j2ee\home\oc4j.jar;D:\work\jdev1111\jdev\lib\jdev-oc4j-embedded.jar -Xverify:none -XX:MaxPermSize=512m -Ddisable.checkForUpdate=true -Doracle.application.environment=development -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false "-Djava.security.policy=C:\Documents and Settings\kazelot\Application data\JDeveloper\system11.1.1.0.22.47.96\o.j2ee\embedded-oc4j\config\java2.policy" oracle.oc4j.loader.boot.BootStrap -config "C:\Documents and Settings\kazelot\Application data\JDeveloper\system11.1.1.0.22.47.96\o.j2ee\embedded-oc4j\config\server.xml"
    [waiting for the server to complete its initialization...]
    2008-01-30 13:19:09 oracle.j2ee.xml.XMLMessages warningException
    WARNING: Exception Encountered
    2008-01-30 13:19:10 oracle.oc4j.util.SystemLog log
    SEVERE: Server start failed processing configuration
    java.security.AccessControlException: access denied ( CredentialAccessPermission credstoressp.credstore.default.systemuser read)
         at java.security.AccessControlContext.checkPermission(AccessControlContext.java:264)
         at java.security.AccessController.checkPermission(AccessController.java:427)
         at oracle.security.jps.util.JpsAuth$AuthorizationMechanism$3.checkPermission(JpsAuth.java:256)
         at oracle.security.jps.util.JpsAuth$Diagnostic.checkPermission(JpsAuth.java:180)
         at oracle.security.jps.util.JpsAuth$AuthorizationMechanism$6.checkPermission(JpsAuth.java:280)
         at oracle.security.jps.util.JpsAuth.checkPermission(JpsAuth.java:315)
         at oracle.security.jps.util.JpsAuth.checkPermission(JpsAuth.java:338)
         at oracle.security.jps.internal.credstore.util.CsfUtil.checkPermission(CsfUtil.java:527)
         at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.getCredential(SspCredentialStore.java:412)
         at oracle.security.jps.fmw.util.JpsFmwUtil.findSystemUser(JpsFmwUtil.java:218)
         at oracle.security.jps.fmw.JpsUserManager.init(JpsUserManager.java:235)
         at oracle.security.jps.fmw.JpsUserManager.<init>(JpsUserManager.java:247)
         at oracle.security.jps.fmw.JpsUserManagerFactory$JpsUserManagerFactoryI.create(JpsUserManagerFactory.java:252)
         at com.evermind.server.deployment.UserManagerConfig$JAZN.construct(UserManagerConfig.java:635)
         at com.evermind.server.deployment.UserManagerConfig.delegatee(UserManagerConfig.java:253)
         at com.evermind.security.IndirectUserManager.getAdminUser(IndirectUserManager.java:126)
         at com.evermind.security.IndirectUserManager.getAdminUser(IndirectUserManager.java:126)
         at com.evermind.server.XMLApplicationServerConfig.setPassword(XMLApplicationServerConfig.java:3157)
         at com.evermind.server.XMLApplicationServerConfig.<init>(XMLApplicationServerConfig.java:244)
         at com.evermind.server.ApplicationServer.createConfig(ApplicationServer.java:648)
         at oracle.oc4j.server.ServerFactory$Worker.prepareConfig(ApplicationServerFactory.java:201)
         at oracle.oc4j.server.ServerFactory$Worker.start(ApplicationServerFactory.java:220)
         at oracle.oc4j.server.ServerFactory$Worker.run(ApplicationServerFactory.java:235)
         at java.lang.Thread.run(Thread.java:595)
    2008-01-30 13:19:10 oracle.oc4j.util.SystemLog logNoStack
    SEVERE: Server exiting: ApplicationServer entered state EXITING
    Process exited with exit code 1.
    Is it something with my configuration. My environment is:
    ADF Business Components     11.1.1.47.96
    Java(TM) Platform     1.5.0_11
    Oracle IDE     11.1.1.0.22.47.96
    SOA Composite Editor     11.1.1.0.0 (Build 071219.1424)
    Versioning Support     11.1.1.0.22.47.96
    Thanks for any suggestions,
    kazelot

    change the file to just (DIRTY way, but works)
    grant {
         permission java.security.AllPermission;
    };Really dirty as these permissions are not Java EE compliant.
    --olaf                                                                                                                                                                                                                                                                                                                                                                           

  • MapViewer JDeveloper embedded OC4J installation error

    Hi,
    I downloaded all latest mapviewer.ear and latest OC4J.
    Followed MapviewerUG installation instructions
    After starting OC4J
    using the url http://localhost:8888/mapviewer/
    works well and the demos like jview also works well
    using the url http://localhost:8888/mapviewer/omserver
    however, generates the following error
    &lt;?xml version="1.0" encoding="UTF-8" ?&gt;
    &lt;oms_error&gt;Message:[oms] empty or null xml map request string. Sat Apr 02 14:40:14 IST 2005 Severity: 0 Description: at oracle.lbs.mapserver.oms.getXMLDocument(oms.java:852) at oracle.lbs.mapserver.oms.doPost(oms.java:302) at oracle.lbs.mapserver.oms.doGet(oms.java:234) at javax.servlet.http.HttpServlet.service(HttpServlet.java:740) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:765) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186) at java.lang.Thread.run(Thread.java:534)&lt;/oms_error&gt;
    I also downloaded the latest JDeveloper 10G and JDeveloper extensions and follwed the instructions in the How To Document
    How To Build Dynamic Maps Using JDeveloper 10g and Oracle Application Server MapViewer
    An Oracle JDeveloper How To Document
    Justin Lokitz
    October 2004
    I have no compilation errors but I am not able to view the density map. I am getting the Internal Server Error 500 instead.
    Can anyone please guide me through this.
    Thomas Joseph

    Hi Joao
    Thanks for tip on the log file.
    I have the data loaded.
    Evrything works fine when I use Mapviewer with OC4J and try the jview demo.
    I am however not able to get the example 'How to build Dynamic Maps' running using JDeveloper using the embeded OC4J server.
    The jsp source is as follows
    <%@ taglib uri="http://xmlns.oracle.com/j2ee/jsp/tld/spatial/mvtaglib.tld" prefix="mapviewer"%>
    <%@ page contentType="text/html;charset=windows-1252"%>
    <html>
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
    <title>untitled</title>
    </head>
    <body>
    <DIV align="center">
    <P>MapViewer WebMap</P>
    <P>
    <mapviewer:init url="http://localhost:8888/mapviewer/omserver" datasource="mvdemo" id="mvHandle"/>
    </P>
    </DIV>
    <DIV align="center">
    <mapviewer:setParam antialiasing="true" basemap="density_map" centerX="-122.4" centerY="37.8" height="450" size="10" title="MyWebMap" width="600"/>
    <mapviewer:run/>
    </DIV>
    <img src="<mapviewer:getMapURL />"/>
    </body>
    </html>
    There are no comilation errors
    When I run the code I get 500 Internal Server Error.
    The Application2-oc4j-app.log generated is as follows
    05/04/05 20:04:11 Started
    05/04/05 20:05:14 Application2-ViewController-webapp: JDevOJSP: init
    05/04/05 20:05:14 Application2-ViewController-webapp: action: init
    05/04/05 20:05:16 Application2-ViewController-webapp: 9.0.4.0.0 Started
    05/04/05 20:05:28 Application2-ViewController-webapp: Servlet error
    javax.servlet.jsp.JspException: Connection refused: connect
         at oracle.lbs.mapclient.taglib.MapViewerRunTag.doStartTag(MapViewerRunTag.java:123)
         at webmap.jspService(webmap.jsp:17)
         at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:139)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:349)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:604)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
         at java.lang.Thread.run(Thread.java:534)
    Please put me on the track. I am not able to figure out what is going wrong.
    Regards
    Thomas Joseph

  • The embedded oc4j in JDeveloper returned a wrong data from the SOAP message

    Greetings,
    I made a webservice in .NET to send simply the current time of the server. then, I developed another client in JDeveloper to receive the time.
    and the object declared in j2ee as Calendar object.
    everythings went fine, but what I have noticed when I print the Calendar object, the time came plus 3 hours later as the .NET time.
    FYI, I had checked the soap message that was received by embedded OC4J ,it was correct time, but the problem when you print it. and both .NET and Jdeveloper in the same machine
    example:
    <?xml version = '1.0' encoding = 'utf-8'?>
    <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    <soap:Body>
    <HelloWorldResponse xmlns="http://tempuri.org/">
    <HelloWorldResult>2008-10-14T10:40:21.12</HelloWorldResult>
    </HelloWorldResponse>
    </soap:Body>
    </soap:Envelope>
    when I printed the data, I got 2008-10-14T13:40:21.12
    so, does anyone have an idea about what is going on ??
    thanks in advance.

    ANY HELP :(

  • Jdeveloper 9i Embedded OC4J Connection

    In the Connection Wizard's Connection Panel, there is a Target Web Site field to fill. The default is http-web-site. If I use the embedded OC4J which is in the same machine as the Jdeveloper, what should I use?
    Thanks
    Scott

    The output from the "Run" command for a servlet is"
    C:\PublicDownLoads\Oracle\JDev_9.0.3_New\jdk\bin\javaw.exe -ojvm -classpath C:\PublicDownLoads\Oracle\JDev_9.0.3_New\j2ee\home\oc4j.jar -Xverify:none -Doracle.j2ee.dont.use.memory.archive=true com.evermind.server.OC4JServer -config C:\PublicDownLoads\Oracle\JDev_9.0.3_New\jdev\system9.0.3.1035\oc4j-config\server.xml"
    Which DEOS NOT have many of my classpath settings(from "Libraries" and "Additional classpath"). What script is ran when one says "Run" in JDev? I like to add to the above classpath(BTW, works fine for an APP). I couldn't find any info in "oc4j-config" sub-dir of the "J2EE/home" of the install.

  • Using embedded oc4j in jdeveloper 10.1.3. EA failed

    Hallo
    i have the following problem, and hope somebody can help me.
    i installed the jdev 10.1.3.EA 3412 on notebook with suse linux 9.2 and made a simple hallo world jsp.
    compilation was ok with no errors.
    when i run the jsp in jdev i get the following message:
    [Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
    **** Unable to obtain password from principals.xml. Using default.
    /home/wilhetho/jdevhome/system/oracle.j2ee.10.1.3.34.12/embedded-oc4j/config>
    /usr/share/jdk1.5.0_06/bin/java -server -classpath /opt/oracle/jdev/j2ee/home/oc4j.jar:/opt/oracle/jdev/jdev/lib/jdev-oc4j-embedded.jar -Xverify:none -DcheckForUpdates=adminClientOnly -Xrs -Doracle.application.environment=development -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config /home/wilhetho/jdevhome/system/oracle.j2ee.10.1.3.34.12/embedded-oc4j/config/server.xml
    [waiting for the server to complete its initialization...]
    24.01.2006 19:15:34 com.evermind.server.XMLDataSourcesConfig parseRootNode
    INFO: Legacy datasource detected...attempting to convert to new syntax.
    06/01/24 19:15:43 java.net.NoRouteToHostException: No route to host
    06/01/24 19:15:43      at java.net.PlainSocketImpl.socketConnect(Native Method)
    06/01/24 19:15:43      at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
    06/01/24 19:15:43      at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
    06/01/24 19:15:43      at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
    06/01/24 19:15:43      at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
    06/01/24 19:15:43      at java.net.Socket.connect(Socket.java:507)
    06/01/24 19:15:43      at java.net.Socket.connect(Socket.java:457)
    06/01/24 19:15:43      at java.net.Socket.<init>(Socket.java:365)
    06/01/24 19:15:43      at java.net.Socket.<init>(Socket.java:207)
    06/01/24 19:15:43      at oracle.jdevimpl.runner.oc4j.Oc4jNotifier.sendMessage(Oc4jNotifier.java:98)
    06/01/24 19:15:43      at oracle.jdevimpl.runner.oc4j.Oc4jNotifier.postInitApplicationServer(Oc4jNotifier.java:55)
    06/01/24 19:15:43      at com.evermind.server.ApplicationServer.serverExtensionPostInit(ApplicationServer.java:1041)
    06/01/24 19:15:43      at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:927)
    06/01/24 19:15:43      at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:98)
    06/01/24 19:15:43      at java.lang.Thread.run(Thread.java:595)
    06/01/24 19:15:43 Oracle Containers for J2EE 10g (10.1.3.0.0) - Developer Preview initialized
    After this, the oc4j container is up an running, because i can reach it over the adress localhost:8988.
    So now my two questions:
    -> there is no browser starting (i tried different entries under tools-preferences-webproxy). what can be the reason?
    -> where does the error message no route to host come from?
    thank you

    Hi, here Re: java.net.ConnectException: Connection timed out: connect i post my workaround.
    bye
    Antonio.

  • Hi! I am new to Jdeveloper.Having problem while deploying on embeded OC4J

    hi everybody
    I am new to JDeveloper.I am using OracleJDeveloper 10.2.3 version.I am facing problem while deploying any application on embeded OC4J server.I have tried a lot after searching solution on this site,but all of no use.Actually i am not able to established connection with OC4J.Whenever i am testing the connection it`s giving message Connection Failed message.Please provide me the exact solution.I am in need of this so reply as soon as possible.
    Thanks In Advance
    Rohit Tiwary

    Hi Rohit,
    You dont have to create a connection to deploy in embedded oc4j. You can simply right click on the jsf page and run.
    HTH.
    Regards,
    Arun

  • Problem with  Jdeveloper Embedded OC4J  XML parsing

    Hi all,
    I am having a problem getting jdeveloper to work well. If I use jdeveloper to build the WAR file for my app and I deploy to Tomcat, the app runs fine with no error.
    However, if I try to run my app within the jdeveloper, I get this error -
    08/06/10 19:11:10 com.ibatis.dao.client.DaoException: Error while configuring DaoManager. Cause: java.lang.RuntimeException: XML Parser Error. Cause: oracle.xml.parser.v2.XMLDOMException: invalid character [ in name
    Caused by: java.lang.RuntimeException: XML Parser Error. Cause: oracle.xml.parser.v2.XMLDOMException: invalid character [ in name
    08/06/10 19:11:10 at com.ibatis.dao.engine.builder.xml.XmlDaoManagerBuilder.buildDaoManager(XmlDaoManagerBuilder.java:112)
    08/06/10 19:11:10 at com.ibatis.dao.client.DaoManagerBuilder.buildDaoManager(DaoManagerBuilder.java:47)
    I have tried to turn off XML parsing within Jdeveloper but no luck. I don't understand why jdeveloper will be trying to implicitly parse the XML doc, and wont even do it well.
    Is there a way I can turn off Embedded OC4J XML parsing ? and let it just use the parser in the application ? I mean Tomcat works fine with this application.
    Please help !

    I think maybe you use wrong adf lib when deploying your project to the OC4J.
    You can update your oc4j in the jdev.[JDEV->Tools->ADF Runtime Installer-> Standalone OC4J].
    Good luck
    Hart

  • JDBC datasoure that works for embedded OC4J server of JDeveloper 10.1.3.4

    Hi all,
    I have this in the Application Module as JDBC datasource: java:comp/env/jdbc/DBCON
    That works fine if I deploy the application on Oracle application- or tomcat-server.
    On the connections tab in JDeveloper I have made a database connection with the name DBCON.
    But when I run the application from Jdeveloper with the embedded OC4J server I get this error:
    Unable to lookup Data Source at context java:comp/env/jdbc/DBCON
    What do I do wrong?
    Thanks in advance.

    Hi,
    Edit the <application_name>-data-sources.xml file under the root directory of your application, and setup a managed data source and connection pool with the data source having the correct jndi name, eg. jdbc/DBCON
    You can either do this manually (which I find easier), or use the tool within JDev
    Tools - > Embedded OC4J Preferences -> Current Workspace -> Data Sources -> New
    -chris

Maybe you are looking for

  • Problem copying text from word to dreamweaver

    Howdy.. had a problem copying text from a word doc (07) to dreamweaver, for some strange reason it missed a complete section in the middle, 2 paragraphs gone... no errors... no blank spaces, just would not copy and paste the section, everything b4 an

  • SAP F&R: replenishment priorities for locations?

    Hi! Could anyone help  to find a solution please. There's an often business case that stock is very limited, and currently (w\o SAP F&R) business distributes the total amount manually b/w the locations, according to certain location prioritization. A

  • Microsoft Office Product Key

    Hi I am planning on getting a new hard drive for my macbook pro and I can't find my Microsoft Office 2011 product key (or installation disk) If i want to have office on the new hard drive, do I simply have to copy the Applications (and related files)

  • Where does iphone backup when hooked to mac

    When I plug my iphone into my Mac.  It automatically backups up when iTunes launches.  Where does it backup to and can I turn this off?

  • IPhoto Library Explainations

    Good Day, I'm trying to understand how iPhoto works, specifically how it goes about creating the files and directories in the Library. In the Library I have 3 large directories: Data, Modified, Originals. Originals I understand (they are the original