Embedded swf fiile in exported .exe movie not working

I have exported a movie as a stand alone .exe file. The movie
has a flash file embedded in it. When it plays on my own computer
it works fine, but when it plays on another computer, it will show
a solid red box for a couple seconds in a couple of different
spots...all within the embedded swf file. Can anyone give me an
idea why this might be occurring? I am thinking it has something to
do with an SWF embedded in an EXE file, but really don't have a
clue!

I'm glad to see I'm not the only one. Only I have large
portions of a very large EXE file delivered in red pages. It is
irregular, too; before I left work yesterday, the entire file
played fine. Reloading and rerunning it this morning, on the same
machine, shows the red pages again. I'm experimenting to see if
it's a loading/buffering problem by letting it cycle through a
couple times, to see if that improves it. If it doesn't however, we
have had better success splitting the file in two. But that
presents it's own problems to link them to run as a single loop.
I'll be very interested in knowing the solution to this, too.
Oooo! I just found a useful reply to the same issue from a
Captivate Consultant. Search under General forums, keyword 'red',
and look for the title 'Screen goes red'. Here's what the solution
reads:
Check:
1) Display time for the animation may need to be adjusted a
tiny amount, or
2) Frame rate for the animation may need to be changed if it
conflicts with the movie frame rate.
It only seems to happen on slides that contain animations
because it is the animation that is causing the problem, so
"tweaking" its settings can usually solve the problem.
Hope this helps.

Similar Messages

Disp+work.exe is not working

Hi Gurus.........i have system ecc6.0 installed , unfortunatly the disp+work.exe is not working (gray in color) .Please help me out.
below is the dev_dsp file details :
trc file: "dev_disp", trc level: 1, release: "700"
sysno      00
sid        EC6
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    75
intno      20050900
make:      multithreaded, Unicode, optimized
pid        2196
Fri Sep 19 21:26:44 2008
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2196) [dpxxdisp.c   1237]
     shared lib "dw_xml.dll" version 75 successfully loaded
     shared lib "dw_xtc.dll" version 75 successfully loaded
     shared lib "dw_stl.dll" version 75 successfully loaded
     shared lib "dw_gui.dll" version 75 successfully loaded
     shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Sep 19 21:26:49 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >gcecc6_EC6_00                           <
DpShMCreate: sizeof(wp_adm)          18304     (1408)
DpShMCreate: sizeof(tm_adm)          3994272     (19872)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm)          528064     (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1440)
DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 05EF0040, size: 4653368)
DpShMCreate: allocated sys_adm at 05EF0040
DpShMCreate: allocated wp_adm at 05EF1E40
DpShMCreate: allocated tm_adm_list at 05EF65C0
DpShMCreate: allocated tm_adm at 05EF65F0
DpShMCreate: allocated wp_ca_adm at 062C5890
DpShMCreate: allocated appc_ca_adm at 062CB650
DpShMCreate: allocated comm_adm at 062CD590
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0634E450
DpShMCreate: allocated gw_adm at 0634E490
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0634E4C0
DpShMCreate: allocated wall_adm at 0634E4C8
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Sep 19 21:26:50 2008
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
Fri Sep 19 21:26:52 2008
J2EE server info
start = TRUE
state = STARTED
pid = 2628
argv[0] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[1] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1044
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=EC6
argv[7] = -DSAPMYNAME=gcecc6_EC6_00
argv[8] = -DSAPPROFILE=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Fri Sep 19 21:26:55 2008
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1623]
Fri Sep 19 21:27:06 2008
***LOG Q0K=> DpMsAttach, mscon ( gcecc6) [dpxxdisp.c   11586]
Fri Sep 19 21:27:12 2008
DpStartStopMsg: send start message (myname is >gcecc6_EC6_00                           <)
DpStartStopMsg: start msg sent
Fri Sep 19 21:27:20 2008
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Fri Sep 19 21:28:30 2008
CCMS: start to initalize 3.X shared alert area (first segment).
Fri Sep 19 21:28:33 2008
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Fri Sep 19 21:28:52 2008
ERROR => W0 (pid 2636) died [dpxxdisp.c   14241]
ERROR => W1 (pid 2644) died [dpxxdisp.c   14241]
ERROR => W2 (pid 2652) died [dpxxdisp.c   14241]
ERROR => W3 (pid 1632) died [dpxxdisp.c   14241]
ERROR => W4 (pid 908) died [dpxxdisp.c   14241]
ERROR => W5 (pid 2660) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 2668) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 2676) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 2684) died [dpxxdisp.c   14241]
ERROR => W9 (pid 640) died [dpxxdisp.c   14241]
ERROR => W10 (pid 2692) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 2700) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 732) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 19 21:29:02 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Fri Sep 19 15:59:02 2008
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program Cl User         Action                    Table
0 DIA     2636 Ended         no      1   0             0
1 DIA     2644 Ended         no      1   0             0
2 DIA     2652 Ended         no      1   0             0
3 DIA     1632 Ended         no      1   0             0
4 DIA      908 Ended         no      1   0             0
5 DIA     2660 Ended         no      1   0             0
6 UPD     2668 Ended         no      1   0             0
7 ENQ     2676 Ended         no      1   0             0
8 BTC     2684 Ended         no      1   0             0
9 BTC      640 Ended         no      1   0             0
10 BTC     2692 Ended         no      1   0             0
11 SPO     2700 Ended         no      1   0             0
12 UP2      732 Ended         no      1   0             0
Dispatcher Queue Statistics               Fri Sep 19 15:59:02 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
1
2000
1
1
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
1
1
2000
1
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          10
wake_evt_udp_now     0
wake events           total     6, udp     2 ( 33%), shm     4 ( 66%)
since last update     total     6, udp     2 ( 33%), shm     4 ( 66%)
Dump of tm_adm structure:               Fri Sep 19 15:59:02 2008
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks               Fri Sep 19 15:59:02 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 19 21:29:07 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >gcecc6_EC6_00                           < (normal)
DpJ2eeDisableRestart
MsIDelService: delete service J2EE for myself
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=161,pac=1,MESG_IO)
MsINiWrite: sent 161 bytes
send msg (len 110+51) to name           MSG_SERVER, type 0, key -
MsSndName: MS_DEL_PROPERTY ok
Send 51 bytes to MSG_SERVER
MS_DEL_PROPERTY : asynchronous call
send MsDelService(J2EE) to msgserver
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2628)
killing process (2628) (SOFT_KILL)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
NiBufISelUpdate: new MODE -- (r-) for hdl 4 in set0
SiSelNSet: set events of sock 1508 to: ---
NiBufISelRemove: remove hdl 4 from set0
SiSelNRemove: removed sock 1508 (pos=2)
SiSelNRemove: removed sock 1508
NiSelIRemove: removed hdl 4
DpDelSocketInfo: del info for socket 4 (type=8)
NiICloseHandle: shutdown and close hdl 4 / sock 1508
NiBufIClose: clear extension for hdl 4
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1536 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1536 (pos=3)
SiSelNRemove: removed sock 1536
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 16)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 1536
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2196) [dpxxdisp.c   10259]
Good Bye .....

The work process are dying
ERROR => W1 (pid 2644) died [dpxxdisp.c 14241] *** ERROR => W2 (pid 2652) died [dpxxdisp.c 14241
This lead the dispatcher to emergency shutdow:
DISPATCHER EMERGENCY SHUTDOWN ***
if the dispatcher cannot start the work process it force the shutdown.So, you need to check
at the work process trace (dev_w*) files to find out the reason the they are dying.
@deeptss
if you are talking about the WARNING
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0)took 5 seconds ***
this is a normal situation if the reverse name resolution is not working.
I have found this error when the DNS server has without the reverse zone configured.
However this is not a problem to the dispatcher operation.
Cheers
Clebio

Export to Excel not Working

Hi
I'm using JDeveloper 11g TP4 and in Firefox 3.X export to excel not working
Regards,
JavaDeVeLoper

Java developer,
Firefox 3.x is not one of the documented supported browsers for 11g TP4 (FF 2.0.x and IE 7 are).
I'm assuming by "export to excel," you are talking about an adf faces table?
John

The CMS.exe is not working.

Hi all,
The CMS.exe is not working.
SIA is running and using port 6410.
CMS is not running, even that is using port 6400.
In the last log file of the CMS is see the following:
(err.m_IDSError == IDS_ERR_CMSSYSTEMDB_NODATABASECONNECTIONSAVAILABLE : Error refreshing CMS listeners: ).
The database look ok, so i guess there is somthing i can not see.
How can i find the issue with teh DB? or maybe it relates to somthing else....?
Thanks,
Doron

Hi Mandar,
Please check this:
Error:
The root server reported an error Initialization Failure. (Reason: CMS system database is overloaded, please try again. If the problem persists, please contact the system administrator(FWB 00027)CMS system database is overloaded, please try again. If the problem persists, please contact the system administrator(FWB 00027)
Cause
Timeout while waiting for database resources.
Resolution
On the server machine, navigate to Central Configuration Manager (CCM).
Stop the Server Intelligence Agent (SIA).
Go to the properties of the SIA.
Navigate to 'Startup' tab.
In the 'Local CMS' section, double click on the Central Management Server, a 'Server Properties' dialog box would appear.
Add the switch -ndbqthreads 10 -maxobjectsincache 100000 at the end of the command line.
Start the SIA.
Please try the above steps and share your feedback.
Thanks,
Arun

Export vCard is not working on Chrome; on Chrome Version 40.0.2214.93 m; function works on Mozilaa and IE.

Export vCard is not working on Chrome; on Chrome Version 40.0.2214.93 m; function works on Mozilaa and IE; is anyone else seeing this same issue?

Update; my OS is Windows 7 Pro 64-bit v1.08.00.AF B09 SP1. Same issue reported (by 7 others) at => https://discussions.apple.com/thread/6779059

Why is exporting to PDF not working?

Why is exporting to PDF not working?

Dear Claudio,
I know it wasn't much to go on but I got your attention!
I work for a charity and use a program called "Donor Perfect".
It has a feature that when you generate a report it gives you the option to export to MSWord, Excel, and PDF.
Below is the step by step description of what happens.
After log on ......
     1. Click on Reports
     2. Listings
     3. Report Category(any)
     4. Select Record type(any)
     5. Select report options (any selection filter that fits or Build a filter) and sort order(any)
     6. Enter title (accordingly)
     7. Click on Preview
     8. When next screen opens with report visible - in "Report Print preview" line above report choose PDF icon
     9. Export to PDF window opens
     10. click on Page range-ALL
     11. What to print-All pages in Range
     12. Save as C:\DPW32\dpsumm.pdf
     13. collate
     14. number of copies(1)
     15. Click on "Screen"
     16. Click on "Display Conversion Status"
     17. Then "OK"
     18. After conversion status reaches "100%" nothing happens -screen does not change!
Then I minimize DP screen and I go to Start menu
     1. Click on Start
     2. Then "My Computer"
     3. Local Disk "C"
     4. Dpw32
     5. Look for "dpsumm" file with today's date
     6. Size of file says 0 KB and that's it!!!!
In previous versions of DP (8 and 9)
the PDF would open on the screen as soon as the Step 18 was finished, then I could save it with an identifying name to a different folder and use it as an attachment that a Donor could receive by e-mail.
I hope I can get back to that because now I have to convert to "Word" (Which takes a long time)then from that I have to create PDF from Acrobat. too many steps ..... if I have 20-30 reports it's too cumbersome.
Waiting for your suggestions,

All my movies not working anymore since download the new version OS X 10.9.4

all my movies not working anymore since download the new version OS X 10.9.4

Hi Jeff,
In Safari I get this error message: Safari can't open "aam://SAP...[link of the download]" because OS X doesn't recognize internet address starting with "aam:". I thought it was a browser issue (I can't click the download button in Chrome) so downloaded FireFox but it also gives me an error message saying: Firefox doesn't know how to open this address because one of the following protocols (aam) isn't connected to any program or allowed in this context.
I don't have Creative Cloud Membership, I received a CD with Photoshop Lightroom 5 with my new camera from Samsung. Because my MacBook Air doesn't have a DVD drive I figured I should download it. Couldn't find Lightroom 5 in the Appstore so I figured I should download a trial version and simply add the key from the DVD. Unfortunately I can't even download the trial version due to these error messages.
Hope you can help!
Thanks,
Ivana

Export a movie,NOT quicktime,FULL quality dv

hello, i'm trying to export a movie as it is.In full quality,DV extension.I want the best quality possible.The quicktime export ruins the titles.please help
thanks

welcome!
New Discussions ReponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and he post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
If we use the forums properly they will work well...
Shane

Exporting Quicktime Movie not self contained

I exported a QT file withought adding the .mov extension to it. I am exporting a movie that is not self contained so that I can create a QT movie (jpegA) in QT. The Process I used: file>export>QTmovie. It does not create an extension automaticaly so I didn't add it. The file has the FCPlogo with the QT logo inside, but neither FCP or QT will recognize it. I tried just adding the .mov, didn't work do I have to recreate the file and add the .mov manually during creation? It is huge and took 5-6 hrs to create, Is there a way to use the file that was created?
This seems counter intuitive. Never used a program that created a file that I needed to add the extension for without it prompting me to set it, especially when I am asking specifically for a QT movie. Please telll me there is a way to use this 4.5 gig file, I don't have the time to recreate it. Thanks Marc

The movie is completely rendered as far as I can tell(no red lines above sequence, how can I check or make sure it's rendered by rendering in a specific way other than render needs render). It is 94 min, shot in HDV, up to 4-6 tacks of video in some cases with 9 tracks of audio so that may account for size and length of time?
Same machine is being used and I didnt't move the render files. No red lines on project.
You can easily recreate the problem by going through my steps. It is stupid that the .mov doesnt show up. My question is, can I add it afterwards in some way? Make it a smart file or whatever. It is the same type of file just without the extension it didn't ask me to designate or auto designate like would make sense. Sorry for the frustration, I really appreciate your help

'Export audio to movie' not working properly

Hi, when I 'export audio to movie' in Linear PCM format the audio from the original video plays along side the music I have written in Logic X. The audio track from the video is muted apart from where I've used some of the original audio on a new track. How do I get it so that just my music plays along with the video?
Thanks,
Jonny H

Hi Anton
This is a known bug in Logic on the intel macs. We're all hoping this will be fixed in the next version!
There are a few workarounds...
bounce the audio for your movie. Open it in Quicktime pro. Open the movie in QT pro and you can join the movie and audio with a bit of trial and error.
Easier perhaps, is to use imovie to import the movie and audio separately and then export the movie from there. That's what i normally do.
As i said, it's a workaround - but it's better than nothing!
Hope that helps
Rounik

Embedded swf plays in preview mode but not when loaded onto site

http://delormdesigns.com/Oxen2008/2008Fair.html
I have created a swf by first creating an flv from an avi then publishing the swf in flash. I inserted into an html page and can see the video on preview. However, when I load the page and all of the assets onto the site, I get nothing.
I tried to view the swf directly, and it does not play. This may be an issue with how I converted the avi file or how I published the swf. I am starting in this forum just in case.
Thanks!

Yes, I did exactly what you recommended. I swapped the swf with another, loaded the page, and tested it. It worked perfectly. So, even though the original swf worked fine during the preview test, there must be something about the file that does not work when loaded on the site.
I found an article about creating and inserting a flv file from an avi...that will get me 1/2 way there so I will be trying that. Perhaps there was a step in the avi to flv process that needs fixing...and then the swf creation would work.
I appreciate your responses!
~ Caprice

Exporting QT movie that works for any browser

I started with a 922 MB slideshow with music exported from itunes
saved from QT for web it is 4KB will play in QT only if you set connection speed to slow modem (28.8/33.6 Kbps) and not at all in some Explorer Browsers even with the QT plugin.
I noticed that there is an demo Flip 4 Mac option to export the movie as a Movie to Windows Media wmv file. The demo only works for a few seconds. Is there a better way to make this movie work across all platforms without having to upgrade Flip4?
The movie is at
http://homepage.mac.com/jwagnerj/inspiring%20design%20web/inspiring%20design.htm l
thanks!

Exporting to WMV won't make it work across all platforms it will make it work for Windows (and force every mac user to get Flip4mac).
You can manually export in QT Pro to a size and quality you are happier with than 4KB from 922 MB (quite the compression!). That is so small I wonder if it is a reference movie and not the final movie?
Most web pages use Flash for these clips, you can convert to flash free by the backdoor method - create a YouTube account; upload to Youtube then use one of the Firefox tools to download (like Video Downloader) your FLV file they made for you. I presume you can take things down from Youtube, if not, label it something like chlorophyll synthesis in cabbages and nobody will find it anyway.

Quicktime slides show movies not working in iweb

made keynote (hyperlinks only) slideshows, then exported to quicktime. slideshows work on desk top but not online in iweb o8 ( movie pages). Largest show is 4.4mb. they sometimes work, but mostly run on arbitrary loop. if i cant figure this out I might have to leave iweb. have I missed somthing simple?

I solved the problem by simply removing Safari and using an other browser. I'll have to remove the sentence on my webpages that advises people to use Safari.

Movie not working in ie6 or ie 5.5

I am using the following to embed a player but it seems in
some ie6 and on ie 5.5 its not working. It is fine in firefox and
in ie7 and 8 beta
<script language="JavaScript" type="text/javascript">

</script>
<noscript>
// Provide alternate content for browsers that do not
support scripting
// or for those that have scripting disabled.
Alternate HTML content should be placed here. This content
requires the Adobe Flash Player.
<a href="
http://www.macromedia.com/go/getflash/">Get
Flash</a>
</noscript>
Any ideas

Hi Dhiraj,
When you click on the Log off button, do you see any yellow triangle icon (Something like warning) coming at the bottom left of the browser?
If so then you are experiencing a Javascript error with your browser. If you click on that icon a pop up should come up with the exact error.
If you get the error I mentioned I would recommend you to change the security settings of the browser to meduim or low.
Also if you go to internet properties->Security->Trusted Sites->Sites button,
You can try adding the URL of the Portal that you are using like :http://mysapportal
See if this works.
Thanks
Avik
Edited by: AVIK SANYAL on Aug 13, 2009 4:45 AM

Export-Mailbox - DeleteContent not working

Server: Exchange 2007 SP3 RU 10
Client: Outlook 2010 SP1, OWA with IE 9
++++
According to this (and other sources)...
http://technet.microsoft.com/en-us/library/bb266964(v=exchg.80).aspx
I should be able to search for, and delete, messages using this command:
Get-Mailbox -Database DB1 | Export-Mailbox -SubjectKeywords "Virus message" -DeleteContent
"This example first gets all the mailboxes on database DB1, searches for items that contain the string "Virus message" in the subject, and deletes those items."
+++++
I only tried this because a colleague mentioned that he had tried and could not make it work. So I though I would investigate.
So I had test user Alan Reid send seven emails to test user Aisha Bhari. The subject was respectively: Blue, Red, Yellow, North, South, West and East. The content was "Export-Mailbox test 1" then 2, 3, 4, etc.
So at the start of the experiment, Aisha Bhari's Inbox looks like this:
Thinking, at first, that I needed to have an export folder (in fact, if I just want to delete, that is not necessary) I executed the following command:
export-mailbox [email protected] -TargetMailbox ExportMailbox -TargetFolder ForDeletion -SubjectKeywords
"Red" -DeleteContent
Then realizing that was not necessary, and that the processing of the Calendar and Contacts was delaying the experiment, I used this command:
export-mailbox [email protected] -SubjectKeywords "Red" -ExcludeFolders "\Calendar","\Contacts" -DeleteContent
I tried "Red" with and without quotes.
I tried "Blue" and "North". I tried the -ContentKeywords switch with strings like "mailbox" and "test".
The output that displays after the command is executed puzzles me. I read:
StandardMessagesDeleted          : 0
AssociatedMessagesDeleted        : 0
DumpsterMessagesDeleted          : 0
MoveType                         : DeleteOnly
MoveStage                        : Completed
StartTime                        : 12/26/2013 4:36:56 PM
EndTime                          : 12/26/2013 4:37:28 PM
StatusCode                       : 0
StatusMessage                    : Messages have been deleted from the source mailbox.
0 messages have been deleted and "Messages have been deleted from the source mailbox."
If I look at the content of Aisha's mailbox however, the message "Red" is still present, observed in both Outlook and OWA, after logging off and back on again. And thus, obviously, closing and opening both Outlook and OWA. What I see is what you
(still) see in the image posted above. That's it.
Does anyone know why this is not working?
+++++
What about the logs? Well, there is one created for each "export" attempt. Here is one example:
[12/26/2013 5:35:01 PM] [0] Executing Command: 'get-mailbox
[email protected] | export-mailbox -ContentKeywords "Mailbox" -ExcludeFolders "\Calendar","\Contacts" -DeleteContent '
[12/26/2013 5:35:01 PM] [0] Administrator Active Directory session settings are: View Entire Forest: 'False', Default Scope: 'mynet.lan', Configuration Domain Controller: 'DC2.mynet.lan',
[12/26/2013 5:35:01 PM] [0] Searching objects "[email protected]" of type "ADUser" under the root "$null".
[12/26/2013 5:35:01 PM] [0] Previous operation run on domain controller 'DC2.mynet.lan'.
[12/26/2013 5:35:01 PM] [0] Previous operation run on domain controller 'DC2.mynet.lan'.
[12/26/2013 5:35:01 PM] [0] Preparing to output objects. Maximum result set size "1000".
[12/26/2013 5:35:01 PM] [0] Searching objects "mynet.lan/ExchangeUsers/Aisha.Bhari" of type "ADUser" under the root "$null".
[12/26/2013 5:35:01 PM] [0] Previous operation run on global catalog server 'DC2.mynet.lan'.
[12/26/2013 5:35:01 PM] [0] Processing object "mynet.lan/ExchangeUsers/Aisha.Bhari".
[12/26/2013 5:35:01 PM] [0] Searching objects "ex1" of type "Server" under the root "$null".
[12/26/2013 5:35:01 PM] [0] Previous operation run on domain controller 'DC2.mynet.lan'.
[12/26/2013 5:35:01 PM] [0] Searching objects "ex1\SG1\MBXDB1" of type "MailboxDatabase" under the root "$null".
[12/26/2013 5:35:01 PM] [0] Previous operation run on domain controller 'DC2.mynet.lan'.
[12/26/2013 5:35:04 PM] [0] Ending processing.
[12/26/2013 5:35:04 PM] [0] Ending processing.
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] The operation has started.
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] Approving object.
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] Trying to open mailbox:
szServerLegacyDN: /o=MYNET/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=ex1
szUserLegacyDN: /o=MYNET/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=Aisha.Bhari
szServer: EX1.mynet.lan
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] Open mailbox succeeded.
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] The operation has finished.
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] The operation has started.
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] Approving object.
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] Opening source mailbox.
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] Trying to open mailbox:
szServerLegacyDN: /o=MYNET/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=ex1
szUserLegacyDN: /o=MYNET/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=Aisha.Bhari
szServer: EX1.mynet.lan
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] Open mailbox succeeded.
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] Moving messages.
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] Exporting messages.
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] Merging messages.
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] 0 items could not be moved to the target mailbox.
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] Messages moved. Closing connections.
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] The operation has finished.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Hi David,
From your description, I would like to clarify the following things:
1. You need to grant the account which perform the task the full mailbox access permission.
2. Export-Mailbox only marks the items for delete. It doesn't actually delete them. So "-DeleteContent" only marks it for deletion. Your mailbox retention schedule will delete the actual emails.
Hope it helps.
If there are any problems, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

Embedded swf fiile in exported .exe movie not working

Similar Messages

Maybe you are looking for