'Export audio to movie' not working properly

Hi, when I 'export audio to movie' in Linear PCM format the audio from the original video plays along side the music I have written in Logic X. The audio track from the video is muted apart from where I've used some of the original audio on a new track. How do I get it so that just my music plays along with the video?
Thanks,
Jonny H

Hi Anton
This is a known bug in Logic on the intel macs. We're all hoping this will be fixed in the next version!
There are a few workarounds...
bounce the audio for your movie. Open it in Quicktime pro. Open the movie in QT pro and you can join the movie and audio with a bit of trial and error.
Easier perhaps, is to use imovie to import the movie and audio separately and then export the movie from there. That's what i normally do.
As i said, it's a workaround - but it's better than nothing!
Hope that helps
Rounik

Similar Messages

"Itunes has detected a problem with your audio configuration. Audio/Video may not work properly".

Turned my Dell running windows 7 off 2 days ago. Turned on today. Launched ITunes and got message "Itunes has detected a problem with your audio configuration. Audio/Video may not work properly".
All my albums are there but won't play.
Deleted Itunes and reinstalled. Same as before.
Any ideas ??

Hey MrCurwen,
I was able to find an article that included the same error message you're experiencing:
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371
According to that article, if you see the error message "iTunes cannot run because it has detected a problem with your audio configuration," QuickTime may need to be reinstalled. Please follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
On the Start menu, click Control Panel.
Follow the steps appropriate for your Windows operating system below.
Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
During the download:
If you choose to run the installer, proceed to the next step.
If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
Follow the on-screen instructions to install QuickTime.
Reopen iTunes.
Cheers,
David

Export audio to movie - not compatible mp4 !

Hi, I thought Logic X would solve compatibility issues with movie files but I can't "Export Audio to movie" with this format:
AVC Coding, 1280 x 720
AAC, 48000 Hz, Stereo (L R)
Logic X seems to do it but spits out files about 21KB small.
Anyone noticed this and knows a solution that does not mean converting the mp4 into a different format? This is terrible, I work with different quicktime files every day..
Thanks folks,
Malte

Hi Anton
This is a known bug in Logic on the intel macs. We're all hoping this will be fixed in the next version!
There are a few workarounds...
bounce the audio for your movie. Open it in Quicktime pro. Open the movie in QT pro and you can join the movie and audio with a bit of trial and error.
Easier perhaps, is to use imovie to import the movie and audio separately and then export the movie from there. That's what i normally do.
As i said, it's a workaround - but it's better than nothing!
Hope that helps
Rounik

Export Audio to Movie - NOT IN SYNC ANYMORE in 9.1??

This is either a major, major bug or I am completely out of it.
When I do an export audio to movie command, the resulting Quicktime movie has the audio and video not synced as they were in Logic.
I have just upgraded to 9.1 and Snow Leopard 10.6.2 this week. I am having this problem with the 32-bit version of Logic.
Most of my sessions have the movie start time pushed forward or back to suit the start of the audio. I had NO problem in 9.0.2 with this feature.
ALSO.... what's the deal with the the 64-bit Audio bridge plug-in windows? Do we always have to do a double-click to open the actual GUI now-on? Totally s**ks.
Thanks.

Are the movie start times and sequence start times the same? For example, do both the music and the audio start at beat 1, bar 1?
I've found that Logic 9 doesn't maintain the same sync that your project has. In other words, if your video doesn't have a 'pre-roll', but your audio has a one bar count in, then the "bounce to movie" feature will have audio that is out by 1 bar. It's kinda dumb, because Logic should be smart enough to know you want to export the same audio/video sync as you have in your project. But alas it doesn't work that way...
Other possible culprits are latency-inducing plugs on the master bus, like limiters and 3rd party DSP plugins (UAD, Duende, etc).
One workaround I've started using is to bounce my audio mix first, then bring it back on a clean track and trim it to start on the exact same frame as the movie. Then solo the 'mix' audio track and "export to movie" (being sure to bypass any master buss plugins first, so the mix doesn't get processed a 2nd time). this usually works, and also makes it easier to keep track of revised mixes as you go ahead (just make copies of your 'mix' track and mute earlier versions).
good luck.

IPad audio output is not working properly, except on Siri. Any ideas on what is wrong and how to fix it?

iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help. The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't. Any ideas on what is wrong with it and how to fix it?
my iPad is a 3rd gen, 16GB wifi only model, if that helps
I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!

Godly19 wrote:
iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help.
iOS 8 isn't even out yet. If you are running iOS 8, I assume you are a developer and if you are, you are in the wrong forum to try to get help. If you are not a developer and you're running iOS 8, maybe that's why you are having problems on the iPad.
The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't. Any ideas on what is wrong with it and how to fix it?
The type that I made bold doesn't make sense. Is this a typo and you mean that " headphones are not in"?
I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!
And you know they are incorrect because you get sound here and there from time to time? That fact doesn't prove that something isn't working correctly inside. You could very well have a bad connection inside the device causing this, but somehow you seem to know that's not the case.

Audio i/o not working properly after sofware update?

i've been working along fine with my mac, then after my OS told me there was "security update 2007-005" i thought no problem and installed it, then my motu 828 only plays audio for about 5-10sec pop and clicks sometimes then gives up. i have perfectly normal audio when running off the internal speaker without the interface turned on or being used by the os as a playback device. Tried disk utility, disk warrior, installed back to 10.4.0 then did some updates.
i found this in the log files.
May 31 14:50:46 red-door-mac kernel[0]: IOAudioStream[0x2f76100]::clipIfNecessary() - adjusting clipped position to (3ec,990)
May 31 14:50:46 red-door-mac kernel[0]: IOAudioStream[0x2f76100]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (3eb,b90)->(3ed,495).
May 31 14:50:46 red-door-mac kernel[0]: IOAudioStream[0x2f76100]::clipIfNecessary() - adjusting clipped position to (3ec,b90)
May 31 14:50:46 red-door-mac kernel[0]: IOAudioStream[0x2f76100]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (3ec,190)->(3ed,495).
May 31 14:50:46 red-door-mac kernel[0]: IOAudioStream[0x2f76100]::clipIfNecessary() - adjusting clipped position to (3ed,190)
May 31 14:50:46 red-door-mac kernel[0]: IOAudioStream[0x2f76100]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (3ec,390)->(3ed,495).
May 31 14:50:46 red-door-mac kernel[0]: IOAudioStream[0x2f76100]::clipIfNecessary() - adjusting clipped position to (3ed,390)
it works for a little while when i reset back to my motu 828 but it seems to be a problem with the firewire audiostream that's somehow loosing sync or something.
g4 dual 1.25ghz Mac OS X (10.4.9)
Mac OS X (10.4.9)

This board is full of people that are update crazy...
even when they have perfectly good working systems.
i know i thought well it's just a security update not a major update.
Best advice... whenever updating the OS, unplug all
firewire devices.
will take note of that from now on.
Was this auto-update? Try downloading the file and
running the update again with all firewire devices
unplugged.
While the 828 is disconnected perform the factory
reset
again.
Disconnect the firewire cable from the 828mkII
-Press the Setup knob
-Turn the Setup knob all the way to the right
-Press the Select knob
-Press the Value knob
-Power off the interface and plug the firewire cable
back
in
-Power the interface back on
i have the original 828 not mark 2, so no reset i know of, just power on off.
After the Mac updates... reboot and plugin the 828,
see if that doesn't get you going.
pancenter-
cheers pancenter, i'll give it a whirl updating without the interface plugged in. thanks for all your help.

Movie not working properly-very slow

Hi,
I just opened up a file with a movie in it. If I click to play it, the app stops responding for quite awhile, during which maybe one or two frames will play. I'm not sure if this has anything to do with my recent installation of iWork 06, but I thought I should mention it.
Has anyone had this problem, and do you have any hints?
Anneliese

You didn't give us a url to your website. Are you using AS2 or AS3? If you're seeing alpha characters instead of the webding characters that you expect, then you don't actually have the webdings font embedded or used properly.
Can you show the code that you are using, or the settings in the Properties window, for the embedded font(s)?

OEM not working properly

i have installed OEM 10g in windows2000. it is working normally untill yesterday.
yesterday i keep playing with the import/export because it is not working properly. And all of a sudden, the OEM seems to slow down. Especially when i click on something about storage.
any idea what happen?
any suggestion is appreciated
thanks

check the windows task manager to see what is hogging resources.. cpu or memory...and that should help.

Export audio to movie....not work (??)

Dears all,
on my new Mac Pro 8 core and the obvious latest osx update the function
"export audio to movie " seems not work. Logic just bounce a "mute" movie....
Any suggestion...?
Thanks in advance.....

Hi Anton
This is a known bug in Logic on the intel macs. We're all hoping this will be fixed in the next version!
There are a few workarounds...
bounce the audio for your movie. Open it in Quicktime pro. Open the movie in QT pro and you can join the movie and audio with a bit of trial and error.
Easier perhaps, is to use imovie to import the movie and audio separately and then export the movie from there. That's what i normally do.
As i said, it's a workaround - but it's better than nothing!
Hope that helps
Rounik

Clip inspector in imovie not working properly - when I select a picture - and select clip adjustment it tells me that I need to select one or more clips to view Inspector tools and in a clip the audio adjustment only shows a speaker? help

Clip inspector in imovie not working properly - when I select a picture (in project library) - and select clip adjustment it tells me that I need to select one or more clips to view Inspector tools and when I select a movie clip and then click on audio adjustments the audio adjustment appears as a speaker icon and I don't know how to get to the various audio options? It was working fine one minute and then I seemed to lose the functionality. Also editing a photo in a photo or getting rid of ken burns effect etc does not seem to work. help

Can anyone shed any light on this as I am having the same problem? One minute it works fine, the next you get the error message above.
Many thanks.

Logic8 will not let me Export Audio to Movie

So...I have had another weird one.
Normally (in LP7) when I am working with a movie file that has audio attached to it and I want to Export Audio to Movie, Logic brings up a screen before it bounces which shows me what audio is currently attached to the movie and gives me the option to exclude or include that audio in the bounce. Since going 8 that window does not show up. Ever. Logic mixes what I want to bounce with what is already on the movie.
Anyone else having this problem?

I've solved my problem!
First I tried to export audio to a "Apple Motion JPEG A, 768 x 576, 16,7 Mill." Movie - that doesn't work! After converting the reels to "H.264 Decoder, 720 x 480 (853 x 480), 16,7 Mill." - exporting works as before :o))
Try it...

Audio is not working properly and battery is not lasting

audio is not working properly and battery is not lasting over 30 mins

Hello swampdonkey,
I see that you are having a problem with the sound and battery on the computer. I would like to help with this issue but I need some information.
Can you provide the model and product number of the computer? Here is a link that shows how to find that information.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

HT201210 AUDIO NOT WORKING PROPERLY AFTER INSTALLED IOS7

After installed ios 7
photos not able to see fully
audio not working properly.... [no treble, no depth in sound, very low soung even the volume is full]
get strucks while playing games

This board is full of people that are update crazy...
even when they have perfectly good working systems.
i know i thought well it's just a security update not a major update.
Best advice... whenever updating the OS, unplug all
firewire devices.
will take note of that from now on.
Was this auto-update? Try downloading the file and
running the update again with all firewire devices
unplugged.
While the 828 is disconnected perform the factory
reset
again.
Disconnect the firewire cable from the 828mkII
-Press the Setup knob
-Turn the Setup knob all the way to the right
-Press the Select knob
-Press the Value knob
-Power off the interface and plug the firewire cable
back
in
-Power the interface back on
i have the original 828 not mark 2, so no reset i know of, just power on off.
After the Mac updates... reboot and plugin the 828,
see if that doesn't get you going.
pancenter-
cheers pancenter, i'll give it a whirl updating without the interface plugged in. thanks for all your help.

Export Button not working properly in custom OAF page.

Hi,
I have a custom page with a table region is there. There is an export button which exports the rows in an excel sheet.
But it is not working properly, as all the rows are not getting extracted.
Properties set for the export button::
Export all rows :: False
Any sugestion is highly appreciated.
Regards,
Arindam.

Hi Arindam,
Refer below links.
Mukul's Oracle Technology Blog: Implementing Export Button Functionality Programatically
http://dilipoaf.blogspot.in/2013/02/export-selected-rows-data-functionality.html
Thanks,
Dilip

MSI 865PE NEO FISR2 Audio not working properly

The audio on my board is not working properly. I have it set for 6 channel and am using Creative Labs Inspire 5.1 Speakers that have 3 inputs that match the 3 output jacks on the mobo. However, its just not right. It is sending anything to all 5.1 speakers and also to the proper speaker at same time. So every sound is coming through all speakers and it a tad louder on the speaker it should be coming out on. Anyone else have any clue as to what setting I can change to correct this or is this something wrong with the cmedia drivers?

The answer to all your suggestions is yes, already did it and in the demo app the sounds work fine. Its just so odd, I may just go to Circuit City tomorrow and buy another set of speakers and see if it is possibly them that are causing the issue. Then if so, I'll just return the Creative Labs ones as I just bought them 2 weeks ago and CC has great return policy
Actually, one of your questions I did not either understand what you meant or did not see the option Quote
Did you enable the output port correctly - LR to LR, surround to surround, center/lfe to center/lfe
The only thing I see is setting phones, 2, 4 or 6 channel in the cmedia control panel and then I plugged in the proper cables.

'Export audio to movie' not working properly

Similar Messages

Maybe you are looking for