Embeded Flash Object and onkeypress event

In a jsp page,
<body onkeypress="javascript:keyPress(event);"...
//some codes to embed the Flash object
1) If the focus is on other part of the document, not on the
embeded Flash object, the Contrl + Enter key stroke will trigger
the onkeypress event;
2)But, if I click on the embeded Flash object (not the Flash
Object has the focus), the Contrl + Enter key stroke will NOT
trigger the onkeypress event;
How to solve this issue (#2)?
Thanks
Scott

Ok, I've found the thread describing the problem.
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=75&catid=697&threadid =1342621&enterthread=y

Similar Messages

Business objects and start events required for CO11N and CO13 transactions

Hi,
We do production order <b>confirmation</b> and <b>cancellation</b> in CO11N and CO13 respectively. Can somebody please tell me the corresponsing business objects and the start events for them? This is a very urgent issue, I will surely rewad good points.
I guess we need to use AFVC_PM object and "finalconfirmation" event for the confirmation.
Please confirm this and kindly suggest the same for cancellation.
Thanks,
Max

Hi Max,
You will have to use the object BUS2005 - which is for Production order.
If you do not have Required events in the BO, you will have to extend object to add those custom events e.g. Cancellation event.
In this case you wil have to use Status management technique for raising events if standad transaction is not raising them.
Hope following SAP Help link might help you to start off..
http://help.sap.com/saphelp_47x200/helpdata/en/c5/e4aed5453d11d189430000e829fbbd/content.htm
Regards,
Akshay Bhagwat

Business Object and Netweaver, Event Insight

Hello,
Can anyone tell me if Business Objects requires Netweaver Application Server? Also, Event Insight, includes Sybase CEP, Business Object and other components. Is that all on one server that is a Netweaver Application Servier? Or is it some combination of Netweaver and non-netweaver on a partitioned server or some other set-up.
Event Insight, I think is shown as 1 server.
Thx

Hi
The Business Objects Enterprise Intelligence Platform (former Business Objects Enterprise) does not require Netweaver as application server.
You can have a look at: http://www.sdn.sap.com/irj/sdn/bi where yoo find lots of information and overview presentations
Kind Regards
Roland Hoeller

Shockwave Flash Object and Web Access?

Can you use Shockwave Flash Object on a Windows form and
access the internet. I would like to know how to go about doing
this? I want to like stream video files from the web.

Not quite sure what you are asking...
Are you looking for a way to create a web-video player
outside of the browser? (IE - in a .NET standalone
application.....) If so, you will want to use silverlight
(Microsofts best shot at a competitor for Flash, but built into
Visual Studio), or Adobe AIR - which is essentially a way to create
standalone Flash applications that work cross-platform.

How do I get the Play, Stop, Volume controls to appear in my embedded Flash object?

Hello,
I want to show .swf or .flv videos on my website--like
youtube.com. I want to use the standard Flash Player object
embedded in a web page, however, I cannot seem to find the exact
params that make the standard controls appear (ie, Play, Stop,
Pause, Volume, etc). I just want to show a video and have the Play,
Stop, Pause, Volume controls visible at the bottom. What do I need
to do to get these controls to appear?
Here's my current code:
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,19,0"
width="800" height="600">
<param name="movie" value="
http://www.sitename.com/flash/dt_flash.swf">
<param name="quality" value="high">
<embed src="
http://www.sitename.com/flash/dt_flash.swf"
quality="high" pluginspage="
http://www.macromedia.com/go/getflashplayer"
type="application/x-shockwave-flash" width="800"
height="600"></embed>
</object>
Any help would be greatly appreciated! :)
Jason

Sorry! It's AS3. A typo on my part but, thanks for answering the post. This is the correct answer that worked for me. Also, the answer came from Kglad in the AS3 forum
Assign your component an instance name (if it doesn't already have one), eg flv and in the frame that contains that component add:
flv.addEventListener(Event.REMOVED_FROM_STAGE,removedF);
function removedF(e:Event):void{
flv.stop();

Flash objects and Director

HI!
Im thinking of starting to use the SmartFoxServer for some
multiplayer games.
They have a Flash-API so you can use the flash XML-socket to
connect to the server.
Id like to do this in director/shockwave without using a
flashSprite on the stage.
this is how you import the API in flash.
import it.gotoandplay.smartfoxserver.*
and then create a SmartFoxClient object.
var smartfox:SmartFoxClient = new SmartFoxClient()
But can I do the same in director without embedding a
flashsprite?
I dont want the sprite cos youll have to have it on the stage
for on frame... and so on... and so on... bad performance... you
know...
Somethig like this in lingo would be nice.
gSmartFox = newObject("SmartFoxClient")
gSmartFox.sendAmessage("Wow!!")

I would assume this would be easy for Adobe to fix.
Your assumption might be right - I don't know enough to comment. However, persuading them to actually do it, easy or not, is an altogether different matter - and frankly they don't have a great track record with either Director or Shockwave.
IOW: don't hold your breath.

Print PDF-Files with embedded Flash-Object

When i print such a PDF-File, Flash-regenerating is
to slow and the the Flash-processbar is printed
How can i freeze final Flash-layout while printing?

Very strange! What is your installed Reader version?
Try disabling Protected Mode in Adobe Reader [Edit | Preferences | Security (Enhanced)].

Embedded application/x-shockwave-flash objects will not display

4.0b9 on Windows XP
I just get a white section where a shockwave flash object should be, and in all the occurences I've found it's when the flash object is embedded. Youtube works just fine, though...
In the "white section" I can right-click and get the options for Adobe Flash Player 10, but I cannot actually choose any of the menu options.
In some cases, I can choose to display the flash object in another tab, and then it works just fine. Typically an embedded youtube movie clip acts like that that, but not always.
In an example, I see only a white section where the shockwave flash object should be visible in Pichfork TV - http://pitchfork.com/tv/
When I open the page information, in the media section, list of URL's, I find an URL that is both grey and italic, and describes this URL as type Embedded:
URL - http://pitchfork-cdn.s3.amazonaws.com/player/DelveMoviePlayer.swf
Type - application/x-shockwave-flash
I assume this URL is grey and italic because it is not loaded or opened in the pitchfork TV site.
This is the same problem with most embedded flash objects, and I really hope someone can help me! I've browsed aroud the support forums and tried a lot of different tips, but to no avail.
I have of course uninstalled and reinstalled both flash player and shockwave from adobe's site, and made sure it's not the active-x version for IE that's installed.
My add-in manager claims that Shockwave Flash 10.1 r102 is installed and enabled, and the release is the latest available according to adobe.com.
I have also tried to open FF in secure/private mode, but same problem in both modes.
Just to check, I tried to open this site with IE8, and there it displays correctly (and I also remembered why I don't ever use IE8, haha...), so apparently the active-x part of shockwave/flash works...
BR, Torgeir

OK, so now I've tried again to open FF in safe mode again, but the problem is still unsolved. Same problem in safe mode.
The hardware acceleration in the flash player is set to disabled long before I posted this problem.
I didn't know that Pitchfork had such a special flash player, but the problem is the same on any sites. Just chose Pitchfork because it's an English site. Bad example then...
Here's a better example: NME.com:
http://www.nme.com/musicvideos/my-chemical-romance-sing/832454
Here I only see a white space where the flash object is embedded (if it really IS embedded, I dont't know how these things work). But I can right-click and get the dialog for Adobe Flash Player 10 properties (such as settings and global settings), and if I'm lucky to hit the start button (wich I don't see), the flash object starts playing, and I hear all sound but see no image.
I open the page info menu, and here I find in the list of media URL's the link to the flash object, described as an embedded object in the NME site:
URL: http://www.muzu.tv/player/getPlayer/a/RSFVcmvHJ4/autostart=n&includeAll=y&soundoff=n&vidId=832454&videotype=hq
Type: application/x-shockwave-flash
It's grey and italic in the list of media URL's, and I assume that's because it's not properly loaded.
But if I copy the URL from the media URL list and paste it into the adress field of a new tab, I can both see and hear the flash object without a problem.
This is exactly the same issue with local sites that have embedded web radio stations. Cant see the object, and have to be quite lucky to hit the start button. But by stepping via info for site and copy the URL to the flash object and paste it into a new, empty tab, I can both see and hear whatever was supposed to display in the original site.
Any help would be more than welcome! So many of the sites I use most has embedded flash objects, so if I cannot solve this I have to find another browser. I REALLY don't want to, because otherwise I really love FF...

Capture onclick event on flash object using javascript

May the admins forgive me if this is in the wrong forum.
How to capture the onclick event on a web page when the click
happens on an embedded flash object?
You can't. At least not in IE. For some arcane reason either
microsofts developers or the flash guys decided to overrule the DOM
in IE.
So the onclick event is never fired, in any browsers, when
the user clicks an embedded flash object like this:
However there's a workaround. Add the wmode="transparent"
parameter. This make the onclick event okay in Firefox, but still
not IE - where the flash movie is transparent the click event
fires, but only those places.
Instead use the onmousedown and onmouseup events which fires
anywhere on the flash.

>
I tried each of the following in the the Element HTML Form Element Attributes for the File Browse item:
onClick=javascript:alert(this.value);
onClick=javascript:popupURL('http://www.google.com');
onFocus=javascript:alert(this.value);
onChange=javascript:alert(this.value);And what happened?
[A few points on good practice:
1. In the XHTML normally used in APEX 4.0 mark-up, all XHTML, including attribute/event handler names, should be in lower case: <tt>onclick</tt>, <tt>onfocus</tt>, <tt>onchange</tt>...
2. Attribute values should always be quoted.
3. The <a href="http://crisp.tweakblogs.net/blog/313/the-useless-javascript-pseudo-protocol.html">"javascript:" pseudo-protocol is evil</a>. There are a few places in APEX where we may have to resort to using it as URL is all we're offered to work with, but it's always better to use an event handler of some kind, either inline or (better) registered dynamically at runtime following the principles of <a href="http://en.wikipedia.org/wiki/Unobtrusive_JavaScript">unobtrusive JavaScript</a>. +It absolutely should not be used in inline event handlers.+
So:
{code}
onclick="alert(this.value);"
etc

Flash objects not displaying in Firefox (but works fine in Chrome and IE)

Well, I'm trying to embed a Shockwave Flash object into a website I'm building. It displays in Chrome and IE, but it doesn't show up at all in Firefox. It's just white space. Ive tried it on two machines, so it's presumably the code. Both the machines have Adobe Flash enabled... I'm not sure what the problem is. I've not worked with embedding Flash objects in HTML before, so, it's probably something really obvious. I just used the insert command on dreamweaver and it wrote the code that I'm using. If anyone can help me, it would be much appreciated. Here's my code:
<pre><nowiki><object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="99%" height="600" id="FlashID">
<param name="movie" value="The file path" />
<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="10.1.0.0" />

<param name="expressinstall" value="../Scripts/expressInstall.swf" />


<object type="application/x-shockwave-flash" data="the file path" width="99%" height="76.5%">

<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="10.1.0.0" />
<param name="expressinstall" value="../Scripts/expressInstall.swf" />

<div>
<h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
<p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
</div>

</object>
</nowiki></pre>

If you can't post an address for a page demonstrating the problem, could you check the Web Console (Ctrl+Shift+k) and Browser Console (Ctrl+Shift+j) for any messages related to the Flash media? For example, does either console show that Firefox is requesting the SWF file? Does either show an error in content type or any kind of security message?

Embed Animated Flash Objects (*.swf file) in Oracle Forms.

Hello All,
To Embed Animated Flash Object (Shockwave *.swf File) in Oracle Forms, Please Follow the Steps Below.
1. Draw "ActiveX Control" Item on Canvas with the Name "OCXITM".
2. Select "ActiveX Control" Item & Go to its Properties (By Pressing F4).
3. Select "ShockwaveFlash.ShockwaveFlash" in "OLE Class" Property of "ActiveX Control" Item.
4. Come again to the Canvas.
5. Right Click on "ActiveX Control" Item, Select "Insert Object...".
6. In Control Type List, Select "Sockwave Flash Object" and Press "OK".
7. On Canvas, Select "ActiveX Control" Item, Go to "Program" Menu, Select "Import OLE Library Interfaces...".
8. Select All "Method Package(s)" & "Event Package(s)" for "ShockwaveFlash.ShockwaveFlash.X" & Press "OK".
9. Go to "Object Nevigator" (By Pressing F3) & Expand "Program Unit" to verify that the Packages are Successfully Imported.
10. Compile All the Objects (By Pressing "Ctrl+Shift+K").
11. In "WHEN-NEW-FORM-INSTANCE" Trigger Write the Below Code.
** Author   : Muhammad Waseem Haroon                        *
** Dated    : 07-Apr-2005                                   *
** Purpose : To Call Macromedia Flash Object (*.swf File) *
** Module   : Logo                                          *
DECLARE
     oleitm OLEOBJ;
BEGIN
     oleitm := :item('OCXITM').INTERFACE;
     ShockwaveFlash_IShockwa_0.Movie(oleitm,'d:\movie.swf');--it can be dynamic.
END;12. Compile, Save & Run Your Form.... and... See the Beauty.
Thanks & Regards
Muhammad Waseem Haroon
[email protected]
[email protected]
[email protected]

Mark Striekwold did an effort to put flash into forms
http://mark-oradev.blogspot.com/2010/02/flash-inside-oracle-forms.html
http://mark-oradev.blogspot.com/2010/02/flash-test-inside-oracle-forms-part-2.html
http://mark-oradev.blogspot.com/2010/04/flash-test-inside-oracle-forms.html

Can you replace embedded smart object with linked smart object?

Hi,
I'd like to update some document to reflet the new workflow that linked smart object provide. I have made some transformation on those embedded smart object and would like to not have to redo all those so is there anyway way to replace those SO with the linked version of the same SO?
TIA
Jeff

Hi,
I'd like to update some document to reflet the new workflow that linked smart object provide. I have made some transformation on those embedded smart object and would like to not have to redo all those so is there anyway way to replace those SO with the linked version of the same SO?
TIA
Jeff

In PowerPoint I Have Shockwave ActiveX Control - How do I Get Shockwave Flash Object?

I'm running the latest versions of Windows 7 and PowerPoint via Parallels on my Mac. I want to insert a Flash movie into a PowerPoint slide. The instructions I've found tell me to look in Developer section->More Controls, find Shockwave Flash Object, use it to insert a Flash Object, and then to edit the Movie property of that object. But, I do not see Shockwave Flash Object. Instead I see Shockwave ActiveX Control. The properties of Shockwave ActiveX Control do not include a Movie property.
I have gone to "http://get.adobe.com/shockwave/" and clicked the option to install the Shockwave Player, but the site says the Shockwave Player is already installed.
How can I get the Shockwave Flash Object for PowerPoint into my installation?
Thanks very much in advance to all for any info.

Hi Vik.. I don't use Powerpoint but I do know about Shockwave Flash Object. It is in the manage add ons and installs when Flash Player is installed. It is an ActiveX Control and if you have the latest FP installed, Flash10d.ocx should be listed on the same line. It may or may not list the version #, which would be 10.0.42.34. It must be enabled.
Beyond that info I could give you a link to a thread that involved powerpoint 2003 and 2007 if you think that would be of
any help to you.
Just post back.
Thanks
eidnolb

Annoying dotted border around flash objects...

Hey. In the past few months I've noticed every time I have a
flash object on my browser, it's surrounded by a dotted border that
causes me to have to first press on the flash object - and only
then be able to use it.
So, for example, if the flash object is a
menu, I first have to click inside the flash object, and
then the border goes off and the flash is "activated".
Does anyone have any idea what causes this and how can I make
it go away?
Thank you! :)

> I was referring to this annoying dotted box I got around
the flash before
> I
> could use it.
That's what we have been talking about .. all due to the
stupid greed EOLAS
and its patent .. there's been hundreds and thousands of post
and web
sites.
Go to
http://activecontent.blogspot.com
for solutions.
Jeckyl

Flash object not represented in Design view

When I had CS3 and I put in a flash object into my design there was a place holder or grey box that represented where teh flash would be. I no longer see it anymore and I am missing it. Then best i can do is get one of those little yellow icons that lets you know there is a script there to show up.
How do i tun on the place holder version again. (Not really a place holder but I am not sure what to call it)
Thanks,
Houston

Using CS4 I just did a test and inserted a flash object and could see a grey box with the 'F icon' in the middle.
Have you checked View>Visual Aids> Invisible Elements is ticked?
Not sure if this is causing you not to see it - but it's the only suggestion I have :-)

Embeded Flash Object and onkeypress event

Similar Messages

Maybe you are looking for