Employee tax types and tax rates

Hi gurus,
I have a requirement in that i need to get the employee tax  rates. Is tax rates are maintained in SAP  or BSI. If tax rates are maintained in sap what are the tax rate tables. If they are maintained in BSI, is their any FM'S to get the those tax rates.
thanks
venkata

Hi,
If I understand your question correctly, you want to find out Employee tax rates. Check the following points.
1. If you see the RT table employee tax related wage types  are typically denoted by EE prefix and employer tax related ones are denoted by ER prefix.
2. I believe you were able to run the simulation. Please try and open the schema log. Search for function "USTAX" in calculate taxes section. if further open each node therein you would find BSI taxes section in which you may be able to separate the EE and ER taxes.
3. In tax type description as well, in table T5UTT, you should see the text Employer or Employee to distinguish the taxes.
let me know if this helped. Or you can post to me few more details like may be RT table details so that I can help you with specific example.
Vandana

Similar Messages

  • How many new tax type and tax code  are created for change in TDS

    Hello Gurus.
    we are using SAP since more than  one year.
    now tDS rate is change , so i would like to know How many new tax type  and Tax Code is created in our system
    and also like to know At what percentage  i will crete that  new tax code.
    we have pair of tax type and tax code as shown in Example( for Interest) below
    Tax type        Tax code           Name
    I1      IC      Sec 194A - Interest on deposits
    I1      IO      Sec 194A - Interest on deposits OT
    I2      IC      Sec 194A - Interest on deposits Surcharg
    I3      IC      Sec 194A - Interest on deposits EC& SHEe
    I3      IO      Sec 194A - Interest on deps EC& SHEe OT
    I4      IC      Sec 194A - Interest on deposits Pymt
    I4      IO      Sec 194A - Interest on deposits Pymt OT
    I5      IC      Sec 194A - Interest on dep Pymt Surcharg
    I6      IC      Sec 194A - Interest on dep Pymt EC& SHEe
    so  how namy  additional  reuire to create new tax type and code more.
    i am waiting your reply.
    Regard,
    Riten patel
    Edited by: riten patel on Oct 29, 2009 10:23 AM
    Edited by: riten patel on Oct 29, 2009 10:23 AM
    Edited by: riten patel on Oct 29, 2009 10:33 AM

    Hello Hansachechani
    we have  followinng   tax key
    115O     Dividend 115O(1)
    192B     Salary
    194A     Interest income other than securities
    194C     Payment to contractors
    194H     Commission
    194I     Rent
    194J     Prof/Technical services
    195     Payment to foreign nationals
    206C     Tax Collected at Sources (Scrap)
    ST     Service Tax
    and we have followig tax type
    C4     Sec 194H Commission Payment
    C5     Sec 194H Commission Pymt Surcharge
    C6     Sec 194H Commission Pymt EC & SHE Cess
    D4     Sec 115O(1) Dividend Payment
    D5     Sec 115O(1) Dividend Pymt Surcharge
    D6     Sec 115O(1) Dividend Pymt EC & SHE Cess
    F4     Sec 195 Foreign Prof fees Payment
    F5     Sec 195 Foreign Prof fees Pymt Surcharge
    F6     Sec 195 Foreign Prof Fees Pymt E&HS Cess
    G1     Service Tax on GTA
    G2     Service Tax on GTA E Cess
    G3     Service Tax on GTA S&HE Cess
    I4     Sec 194A Int on Deposit Payment
    I5     Sec 194A Int on Deposit Pymt Surcharge
    I6     Sec 194A Int on Deposit Pymt EC & SHE Ce
    L4     Sec 194C Contractors Payment
    L5     Sec 194C Contractors Payment Surcharge
    L6     Sec 194C Contractors Payment EC&S HE Ces
    P4     Sec 194J Professional Payment
    P5     Sec 194J Professional Pymt Surcharge
    P6     Sec 194J Professional Pymt EC & SH E Ces
    R4     Sec 194I Rent Payment
    R5     Sec 194I Rent Payment Surcharge
    R6     Sec 194I Rent Payment E Cess & SH E Cess
    So Is it necessary to create new tax key and tax type?
    wheather i create new tax code only?
    I ma waiting your reply.
    Regard,
    Riten patel

  • RFWT0010 withholding tax type and tax code change in vendor master problem

    Hi
    Due to some reasons I need to change the withholding tax type and tax code in vendor master.
    When i am running the report RFWT010,After changing the tax type and tax code in vendor master...the list contains no items. eventhough there are 14 line items for the vendor that are required to be adjusted with new tax type.
    Please suggest how to solve this query.
    regards
    yesap.fico

    Any inputs?

  • Change Tax Type and Tax Code withheld amount

    Hello,
    I need to change a certain Withholding Tax Type and Tax Code amount to be withheld starting Feb 2007. What is the path in order to change the amount please?
    Thank you,
    Roger

    Hi Roger
    Please see below if you are looking for path to change the min amount
    Financial accounting
    Financial accounting global settings
    Withholding tax
    Extended withholding tax
    Calculation
    Minimum and maximum amounts
    Define min/max amount for withholidng tax types
    thanks - Ashok - Assign points for useful answers

  • Extended WHT tax type and tax code

    Hi,
    In extended WHT, why can have the same tax type with several tax code? I know that they are having different tax deducted percentage but I still do not sure why need to have tax code assigned to tax type.
    Can anyone give advice?
    thanks alot

    hi,
    i know that tax type are for either at the time of invoice or payment but you still not gave advice of why need to have tax code.
    i know tax code is to use to determine percentage but what is the relationship between them.
    thanks

  • IN VENDER MASTER WHICH WHT TAX TYPE AND TAXCODE I WLL ASSIGN

    Please tell me  which tax type and tax code i will assign, ie; invoice or payment  wht tax type.
    Regards,
    Amit

    Hi Amit,
    Assign the tax type and the tax code to the vendor master for the Invoice category.
    For the Payment category, assign only the tax type and not the tax code.
    In this case the user have to manually put the tax codes at the time of advance payment.
    Regards
    SAP CA

  • Withholding Tax Types and Withholding Tax Code

    Good Afternoon SAP Guru's
    I need some help with a very basic question.  I need to configure WHT and EWHT for 1099 and 1042.  I am in the US.  Here is the configuration I completed so far which I hope is appropriate.  Please tell me if it not.
    SPRO for EWHT
    Maintain Country
    Define Reason for Exemption
      *is this needed for 1099 not withholding?
    Maintain Recipient Type
    Define WHT keys
    Check Recipient Types
      *1042 only?
    WHT type for invoice posting
      *created I1 for WHT type for Invoice Posting
    WHT type for payment posting
      *created 42 for 1042
      *created ST for 1099 State
      *created FE for 1099 Federal
    Define Rounding Rule for WHT
      *is this necessary
    Assign Condition Type to WHT type
      *what is this for?
    My big issue is that I am confused on Tax Type and Tax Code.
    I believe it is required to have 3 tax types for invoice posting and 3 for payment posting?  I have 3 scenarios each.  They are as mentioned earlier
    1099- not withholding
    1099- withholding
    1042- withholding
    I haven't configured 3 tax types for invoice posting, only 1 at this time.
    For tax code, I struggle with the tax code field because the field is only 2 positions and therefore, how do I differentiate the different codes listed on the 1099 and 1042 on here?  There are 18 codes on a 1099 and 50 on a 1042.  Any suggestions?
    Do I need to enter 1099 codes twice because one is exempt and the other is withholding?  Or is that the reason why I need to create a exemption reason code for WHT type?
    Any help would be greatly appreciated. 
    Thanks!

    no response

  • Tax model, Tax combinations and Tax types for New Jersey

    We are having problems in computing taxes correctly for Employees who have their Work tax area and Residence tax area as New Jersey.
    Can anyone please help with the best Tax model, tax combination and Tax types for these combination for New Jersey.
    It will be better if you have employees in New Jersey, who have their Taxes deducted correctly.
    We are in an implementation and unfortunately it has been a while since we have applied any Tax related SAP notes or BSI tubs.
    Appreciate all help.

    i have been researching and have found that NJ state taxes are like Puerto Rico taxes. The Schema UMOT may have to be used with a different modifier to calculate Withhoding tax for NJ , different from FED.
    Has anyone of you used this schema ? I find that UTAXRAUTHY ( tax authority) is an Operation in the deecisison tree .Can anyone confirm if Tax type is also an operation?
    I shall appreciate any related feedback.Thanks.

  • TAXCLASSIFICATIONS - tax type and class

    Hi,
    I cannot transfer tax data during creating new material. I know that either tax type or tax classification is responsible for error. I know that some dependences exist but cannot find what exactly. What should I pass to TAX_TYPE_1 and TAXCLASS_1?
    Any help will be appreciated and properly rewarded.
    Br,
    Rafal

    solved

  • Deafult tax code and tax jurisdiction per vendor

    Hi,
       We are using tax jurisdiction in Process,  now while creating Po every time according to vendor we have to enter the tax jjurisdiction and tax code ,  i s there any mwthod  with which we can set default tax code and tax juridiction code as per vendor  means we want to maitain as per vendor code, so that  for eah item i n that PO , tax code and jurisdiction code will come automatically.
    I have also check by making the tax jurisdiction code mandatory in Vendor master , in vendor master i have added tax jurisdiction for the vendor  but while creating PO, system is not selecting the tax jurisdiction automatically.
       regards,
        zafar
    Edited by: zafar_karnalkar on Jun 4, 2010 6:18 AM

    Hello,
    Tax Jurisdiction code will be determined from the plant. Please check your Plant/Site Master. SAP provided a BADI  ME_TAX_FROM_ADDRESS also to redetermine Tax Jurisdiction code based on custom logic.
    For Tax codes, you have to maintain condition records for condition type NAVS using MEK1. There are many standard access sequences available to maintain this. You may also build custom one if needed. 
    Thanks,
    Venu

  • From which table i will get PO tax amont and tax code name.

    HI all
    I"m giving date to develop one Z report.Where i will get the PO tax amonut(not condition amount).i need total TAX amount and TAX code..from where i can get these two??
    plz help me
    thanks
    ramesh reddy

    Hi
    for excise check table J_1IEXCHDR for header
    J_1IEXCDTL for item excise
    The Table name used to find the Tax Values are
    KOMV: Pricing Communications-Condition Record
    KONV: Conditions (Transaction Data)
    From the above tables you can refer the fields below.
    KAWRT
    KBETR
    Fetch the corresponding records based on the field
    KNTYP
    Search net you will get many threads on this

  • Tax Report and Tax Reconcilation Report

    Can anyone tell me what is the difference between Tax Report and Tax Reconcilation Report?
    What is Tax Reconcilation Report supposed to do?

    From the Help Files this is what I have
    Tax Report
    In this report, you can display documents and manual journal entries that include tax amounts, sorted by tax code.
    The tax report includes the following documents:
    A/R and A/P invoices and credit memos
    Stock transfer documents – The stock transfer transactions are displayed only in order to report the transactions in the report due to the fact that the tax percentage is 0.
    Manual journal entries
    Incoming payments and payments to vendors that are not based on invoices
    Incoming payments and payment to vendors that include cash discounts
    Tax Reconciliation Report
    This report enables you to track the taxes amounts that were posted in sales and purchasing documents and in manual transactions.
    The report displays the G/L accounts involved in these transactions and calculates the tax amounts that should have been paid, based on the tax codes defined for each transaction.
    The report covers the following transactions:
    A/P and A/R invoices
    A/P and A/R credit memos
    Manual journal entries
    A/P and A/R down payment invoices
    Incoming and outgoing payments

  • Tax Code and Tax Amount Fields are not appearing

    Hi to all,
    While making Downpayment Request (F-47) Tax Code and Tax Amount Fields are not appearing in the screen.
    for more clarity...
    suppose PO is 1150 include all taxes ( Amount 1000+ Tax Amount 150)
    as per agreement with vendor we need to raise DR for 1150 and based on DR we will make downpayment to vendor (F-48)
    But in F-47 screen Tax Code and Tax Amount fields are not appearing.
    Could any body help me on this??
    Thanks in Advance
    Regards,
    Schilukuri

    why you are looking for tax code field, pay gross amount as per PO, same amount will update in PO history as well as Vendor account.
    Even if you find the tax code field and check the tax code check box, system will not calculate tax  at the time of down payment or down payment request.
    Please remember that by default standard SAP provides the tax code field in f-47 or F-48.

  • Thru MEB4 the Tax amount and Tax percenatage not trigger in Background Job

    Hi,
              When I am executing the T.Code- MEB4 (Rebate Settlement) thru Foreground the Vendor Rebate Amount and Tax are showing.
                                      When I am executing in Background job the Tax amount and Tax Percentage are not triggering (Only the Rebate amount only showing) after execution of Background job in when viewing the job display.
                       Background Job Name: RWMBON01.
       Please suggest.

    Shankar,
    Thanks for reply.
    If I don't put amount in the basic data tab( MIRO) then it does not allow to "simulate" or "Post". But here I can simulate and Post
    I check every thing in WHT Config but I could't found the solution.
    I want to tell another thing, we recently went to patch upgrade from Version 4.7 E  SP 22   to 4.7 E  SP30.
    My question, Is the pacth upgrade affects in anyway???
    If any suitable answer appreciatable.
    Thanks once again for your reply.

  • Reg: tax code and tax percentage

    hi all,
    i have tax code, from that how can i get the tax percentage
    is there any table which maintain both tax code and tax %
    thanks
    suresh

    Hi,
    For calculating Tax you need to look into KONV table.
    Based on the pricing conditions you need to calculate the Tax percentage.
    you can just go the particular transaction for which you want to calculate the tax and there you
    can find the prricing conditions declared under the tax based on which you will calculate the tax.
    Regards,
    Raj.

Maybe you are looking for