EmployeeDetailsVO extension stops Show/Hide from working on EmployeeViewsPG

Hi,
I am on 12.0.6. I have just extended EmployeeDetailsVO to add an extra criteria to the where clause to stop records older than the 1-SEP-2008 from being displayed. It worked successfully and the rows returned on the page EmployeeViewsPG (Nav: Employee Self Service -> Employment Information) reflect the change.
However the Show/Hide button has stopped working. When I click show it does nothing.
I'm not sure why extending the VO would stop this from working. Any suggestions?
Thanks,
Derrin

Hi,
If the sededVO has rowImpl and your adding new columns in the VO query then you need to generate VORowImpl java.
However, You need to restrict to the view query by date '1-SEP-2008'
Then there is no need to extend the VO, extend the controller of the page EmployeeViewsPG.
Intiate the VO by OAViewObject vo = am.findViewObject ("FFFFF");
and then add the where clause.
e.g.
OAViewObject vo = am.findViewObject ("FFFFF");
If (vo != null)
vo.setwherclause(null);
vo.setwhereclause(" Date = '1-SEP-2008'");
vo.executeQuery();
Thanks,
Kumar
Edited by: Kumar Kovela on Jul 31, 2009 3:11 AM

Similar Messages

  • PC Suite stops Microsoft Fax from working

    The fax server information cannot be retrieved
    I have just downloaded and installed the latest version of PC Suite.
    Each time I install the recent versions of PC Suite it stops Microsoft fax from working.
    I am running windows XP SP2
    I have a Nokia 5310
    The error message is:
    The fax server information cannot be retrieved
    The fax wizard will now close.
    I can use an earlier version of PC Suite but then my phone is not fully supported.
    Any ideas?

    Thanks for your response Miksu. You have pointed me to the right place. It is the connection manager that fails to recognise the BT stack that causes my problems. This is always resolved by a repair. It seems that the order of initiation is very important which may be why Luist has started to have the problem.
    In my experience, once things stop to work, I've had to strip out any subsequent installs.
    My PCSuite also stopped working after it installed cable connection manager (or something like that) without me asking. I found it in Control Panel->Add/Remove programs. I removed it and PC Suite started to work again, so I completely removed PC Suite then re-installed, and allowed it to add the relevant devices relating to my phone (about 4 devices alltogether) but alas this did not solve my "return from standby" issue. I think I need to remove PC Suite and then Bluetooth, and maybe something else before re-installing - I'll leave that for a rainy day.
    Thanks again Miksu

  • Getting a message, "A problem has stopped PS Elements from working correctly."

    I just installed PSE11 on my new Windows 8 computer. (I had previously run it on my old computer with Windows 7). The icon flickers when I open PSE11 and then I get a message,  "A problem has stopped Photoshop Elements from working correctly. Windows will notify you if there is a solution to the problem." I never get a notification about a solution. Any ideas?

    Try the following user tip:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • Jquery show/hide not working in contribute CS5 or CS6

    We use Dreamweaver templates and our users use contribute CS5 or contribute CS6 to edit webpages. We recently added some Jquery code that shows/hides DIVs on the webpage. When our users try to edit this page, the Divs are hidden they are not able to see the content to edit it. Is there a workaround for this?

    Hi motiondude,
    I am having a similar problem with CS6 and show/hide buttons in an interactive PDF. I am having the German CS6 version of InDesign (just as info).
    What my problem is: I have made some sort of „gallery“, where there are small versions of all pictures on the page, and a big version of everyone are on a pile over each other.
    When you click the small „preview“ image I made a show/hide action that it should show the big version of the picture. This worked fine on the first page where I tried this!
    But on the second page with other images it wasn’t working at all. When I opened the PDF in my Acrobat Pro (Version 10.1.7) the buttons did not show up the pictures when I
    clicked them. The first image stayed there.
    I for sure checked my setting several times, everything is fine and correct in the actions and buttons area. In the SWF preview I checked it too, everything should work fine.
    Yes, I know that this preview is just for SWF, but it is a fast checking tool for actions.
    Afterwards I also tried opening the file with the PDF viewer. The problem still was there.
    What „solved“ my problem for now was to make an idml and open the file in CS5. Making an interactive PDF out of the CS5 – and it worked!
    Though I am just at the very beginning of my document, so lets see if CS5 will be my solution until I am finished with it.
    To summ it up, it seems this is really a bug in CS6. I also read here http://forums.adobe.com/message/4482056 that this seems to be a bug. But one in the forum mentioned
    this bug should be fixed with the new release. But this was back in 2012! I have the newest update. But I still have the problem.
    Maybe it will take some time until it is fixed in the German version? I am not sure. It is really annoying.
    I think writing a bug report should be done in this case!

  • Gradient tool to show hide not work in layer masks

    I have a PS CC (201410204.r.310X640 subscription.   When I used CS5 I could use the gradient tool (black and white) to show hide content in a layer mask.  This achieved the correct smoothness I want to achieve.  In CC the tool does not work in layer masks -it removes too much or the reverse, etc.  I have no control at all over what is removed and not.   Is there a fix for this please.   The lack of the gradient tool for this effect is making CC not worth using at the mo to be honest and I am just about to give up on it.
    Many thanks for any help you can offer.
    Susan

    Thank you for the replies and I apologise for havingn taken so long but have been busy with one thing and another for a few days.
    How to explain?   What I mean is that if I have an image and I, say, then, for example, add a texture image, I could then add a layer mask to the texture lay and working in the lay mark remove or replace the texture mask as I wished... in CS5 I usually used the diamond gradient in little tiny strokes, if necessary, and this removed the texture in with a nice smooth gradient - or replaced it, depending on whether I was using black or white
    Now it does not matter how I use the gradient tool, each 'stroke' just moves the exposed part to a different place in the image
    and no matter whether the colur is set to black or white, each 'stroke' moves the exposed part to another place in the image.
    In order to replace the texture, I have to use the paint brush tool.
    I hope all this makes sense to you clever folks.   I have not reset preferences and tools but it has made no difference.
    Also, I apparently have PS versiib 2014. 2.2 Release   20141204.r30 x 64   - I have updated several times but do not know if this is the correct version.   Any ideas gratefully received.
    Many thanks.  Susan

  • HT203085 Warning to Mac Yosemite re Webroot security program.  It stops Mac Dictation from working!

    It took Mac phone two days, four sessions, and three hours of wasted time to figure out that Webroot security program what's stopping my dictation program from working. Only after it was disabled and removed from my Mac did the dictation program works again. All Apple user should be aware of this problem with Webroot.

    Wasting your time is all such programs are capable of accomplishing. Some will also waste your money.

  • Alltray show/hide not working

    Alltray starts fine and sends apps to the tray but I can not show/hide them at all.  Undocking works.  I'm running xfce and the system is up to date.
    I was thinking maybe it is related with these errors I get when I logout of xfce.  The xfce panel never has closed gracefully.
    ** Message: xfsm-shutdown-helper.c:209: Using HAL to shutdown/reboot the computer.
    Agent pid 5610 killed
    waiting for X server to shut down xfce-mcs-manager: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.0.
    The application 'xfce4-panel' lost its connection to the display :0.0;
    most likely the X server was shut down or you killed/destroyed
    the application.
    Last edited by bomaroast (2008-04-15 22:28:51)

    Update:  If I run the command 'alltray program &' it runs as expected.  Running the program, running 'alltray &' and then selecting the window to minimize does not function correctly as described above.  Any ideas?

  • The latest update of Mail over the weekend has stopped my Mail from Working

    The Latest update of mail has stopped my Mail from launching.
    It comes up to tell me that it needs to import my Mail and then says - An error occurred during the import. Make sure you have enough available space in your home folder and try again.
    I have plenty of space more than 150gig.
    I have also tried deleting the com.apple.mail.plist and the Mail folder to get a new instalation but it still says the same thing!
    Can anyone help please?

    What update of Mail? Do you mean the 10.7.2 System update? And if so did you download and install the Combo Update?

  • I have the lastest (10.7) I tunes software running on a 64 bit windows 7 system. Today it stopped running all of the tv shows I have downloaded. The error message says that a "problem has stopped i tunes from working and windows is shutting it down" ?

    i have the latest (10.7) itunes installed on a 64 bit Windows 7 based system. Up unitil today I had NO  problem running the TV shows that I have downloaded from I Tunes.
    Today it stopped running all videos. It loads the information in the top box about length & name. An error message pops saying "an error has caused I tunes to stop working". "Windows will check for a solution and notify if therer is a solution."
    Music plays fine so i know that something works on itunes.
    Any ideas?

    Try the following user tip:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • Tabbing isn't working on my Firefox 3.6.10. I am pretty sure it has something to do with something that has been added, but I have no idea what. How do I find what has stopped my tabbing from working?

    I have the "open new windows in new tab instead" marked in Firefox 3.6.10 and it used to work for me just fine, but now it has stopped working and I don't know if it has something to do with some extension or update that has been done or not.

    You can also check for plugins.<br />
    See [[Troubleshooting plugins]]
    Your above posted system details show multiple Java Console extensions.
    You can uninstall (remove) the Java Console extensions and disable the Java Quick Starter extension as you do not need them to run Java applets.
    See http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions
    See also http://www.java.com/en/download/help/quickstarter.xml - What is Java Quick Starter (JQS)? What is the benefit of running JQS? - 6.0
    Disable the Java Quick Starter extension: Tools -> Addons -> Extensions<br />
    Control Panel -> Java -> Advanced tab -> Miscellaneous -> Java Quick Starter (disable)

  • Link 'visit' format stops 'rollover' format from working...

    Hi everyone,
    I'm certain that I'm just being a dunce, but the following issue is driving me round the bend!
    I have a website that seems to be working well. However, I'm having problems formatting the the style of links I create. Simply, when I create a 'visited link' style it doesn't just override the 'normal link' style but it also overrides the 'rollover link' style.
    As you can imagine, this means that once someone has visited a link, in the future the rollovers stop working... reaaally annoying.
    Does anyone know how I can stop this from happening!
    Thanks in advance,
    Steve

    Hi mma,
    I think his requirement is something like he has 2 columns "URL" & "URL-Description"
    like... htttp://www.google.com & Google sight...
    but he don't want to show the url directly instead he will show description column and when he click on the description of google i.e. "Google Sight" it should navigate to the google sight... :-)
    Hope i am correct... but no on-fly answer.. ;)
    Edited by: Kishore Guggilla on Jul 13, 2009 8:58 PM

  • Show/hide - not working when jumping slides

    Hi all - here's the scenario.
    Slide 1 - three buttons that jump to future slides (call them slide 3, 4, and 5) to display information; this slide has a longer audio file to play and direct users on how to use these buttons. Each button has an advanced action attached to it to Show a checkmark image appear on slide 2 so users can see what they clicked previously.
    Slide 2 - Same three buttons, no audio, same advanced action on each button.
    Slide 3, 4 ,5 - Slides with info on them, plus audio. On Exit each jumps back to slide 2.
    My issue is that the checkmark isn't appearing on Slide 2 when users click on a button on slide 1. If users click on a button on slide 2, the check mark appears when they come back to the page.
    I even tried adding an advanced action On Exit to slides 3, 4, 5 to make the check mark appear, but it still doesn't work on whatever button I push/slide I visit FIRST. Second attempts and other buttons work.
    Any ideas?

    Hello
    Sorry, know that I have promised to help you out but had so many deadlines and troubles yesterday. Your previous question is still marked and high on my priority list.
    You issue is linked with the fact that you have twice the same slide and I think you only need them because of the audio, they are identical for the rest. You can set the checkmarks on the first slide to display for the rest of the project and hide them on slide 3, 4, 5. Then, you'll see the checkmark on the second slide when that item has been clicked on the first slide. But the contrary will be a lot more difficult, since that means that you need the same checkmarks on both slides, but they have a different ID, what makes it a lot more cumbersome. It can be solved but will take some time.
    So my first question here is: do you really need the two slides, if it is only for the audio, that could be solved with attaching the audio to an object (posted on my blog an example where a lot of audio clips are manipulated yesterday). Is there another reason for those 2 slides?
    Lilybiri

  • My mom was able to call verizon and then was able to stop my phone from working with the network. The phone itself works but it cannot send messages or use the data. How can i "turn it back on"?

    She called some number and stopped it from using the network. How can i make it work again?

    >Posted edited to remove instructions that could lead to a fraudulent act<  But if she's paying the bills, she's going to see that you turned it back on and I'm guessing you're probably going to get into even bigger trouble (especially if you managed to impersonate her or speak on her behalf).  Best bet, talk to your mom about what she wants from you in order to get it turned back on. 
    Good luck!
    Message was edited by: Verizon Moderator

  • Putting Currency Convertor on site stops moving menu from working

    Hey, My site is theoldfort.com. If you check out the pages you will see that there is always a moving menu on the left. On the page www.theoldfort.com/rental_rates.htm you will see a new currency convertor which I just put in (it works fine) but unfortuantely the moving menu on the left which I believe also uses java stops working. If I take out the convertor it reappears. I would appreciate any assistance as I would hate having to ditch the convertor! Thanks QSCH

    IMHO a more sensible approach would be to ditch that menu. When JavaScript (not Java) is disabled in browser, your menu doesn't work at all.  Very bad for web accessibility reasons.  You could use a CSS styled menu and enclose it inside a CSS sticky box. EXAMPLE:  http://alt-web.com/DEMOS/CSS2-Sticky-Text.shtml
    CSS Express Drop-Down Menus  (tutorial)
    http://www.projectseven.com/tutorials/navigation/auto_hide/
    CSS Tab Designer creates 60+ CSS Styled Button and Tab Menus  (download)
    http://www.highdots.com/css-tab-designer/
    List-O-Rama  (DW Extension)
    http://www.dmxzone.com/go?5618
    CSS  Menu Maker (On-Line Menu Generator)
    http://www.cssmenumaker.com/
    Pop-Menu  Magic2 by PVII (DW extension purchase)
    http://www.projectseven.com/products/menusystems/pmm2/index.htm
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    www.alt-web.com/
    www.twitter.com/altweb
    www.alt-web.blogspot.com

  • Shockwave player v12 on mac has stopped Director player from working. Why?

    Hello. I'm a very longstanding Adobe user, but a complete newcomer to the forum.
    My problem? We have a suite of e-learning courses which are built in Flash, but which use a Director player (11.5) to launch them from CD-Rom. The new release of shockwave player (version 12) has stopped our courses working on a mac. We tried rebuilding the player file with Director 12, but this didn't resolve the problem. Can anyone help? Thanks.

    Hi
    We are in the same case. Since 1999, we have also built an e-learning suite on CD with Director 5 to 11.5 for Mac and Windows. And now, we have some problems with Shockwave 12 on OSx 10.7.
    On Windows 8, there was already an error with shokwave: " L'ordinal 1265 est introuvable dans la bibliothèque de liaisons dynamique IML32.dll "
    . It was enough to delete two files: « IML32.DLL » et « DIRAPI.DLL ». See on Adobe site :
    http://www.macromedia.com/fr/support/director/ts/documents/sw10_restart.htm
    Per haps, its the same case. We look for a solution...
    Best regards
    Jean-Luc

Maybe you are looking for