Empsecformat RestFul service fail after update

Hello everybody when I test "empsecformat" sample web service at the first time, it operates OK, but just pressing "Apply Changes" button, web service fail and returns "Error during evaluation of resource template" message and do not runs anymore.
Then I have to "Reset Sample Data" to recover initial situation
I Have
Application Express 4.2.1.00.08
Listener 1.0
I am running Oracle XE 10 over Linux
Thanks

Read the server logs for the current error, concentrating on Apache.   That'll usually tell you what isn't working.
Check the Apache configuration file syntax:
apachectl configtest
Verify DNS with the command:
sudo changeip -checkhostname
If you're on a NAT'd network and running local DNS services, stay out of .local and .arpa with the domain you're using, and preferably use a registered domain.  If you're NAT'd, don't try to use ISP or Google or other off-network DNS servers, as those do not provide translations for the private-IP-block NAT'd IP addresses you're using.
As for a reset, there's a server setup done file (I don't recall the filename of that off-hand), but I've found removing that file does not reset the entire environment completely and correctly — my usual preferred approach is to set up the new 10.6 server environment, get DNS configured and operating first and only then enable the other necessary services (proper DNS is vital to a stable environment, and incorrect DNS is the trigger for more than a few weird problems with OS X Server), and then migrate over the web files from a backup.   That's the most effort, but generates the "cleanest" environment. 
Less preferred, but can work: using an external backup of the old OS X Server environment and migrating that data over during the installation of 10.6 is another option, but that can sometimes migrate in the old problems.

Similar Messages

  • BB Tour Fails after Update

    Like others, I get the clock on white, then black screen of death, then more clock on white.  The difference is, mine won't stop.  It just keeps going and going and going.  From what I can tell on the BlackBerry website, I need to pay someone to help me resolve the problem (????).  Am I missing something??  PLEASE HELP!

    Mine failed after update too.  Device will not even turn on now and if I plug it into the usb the red light comes up but still no screen.  tried taking out battery and replacing but still nothing...

  • Mobile connection fail after updating apple 4s to ios 6.1.3

    Mobile connection fail after updating apple 4s to ios 6.1.3
    intertnet and other online applications are not working after updating to apple iphone 4s to ios 6.1.3
    what is the solution for this......

    try resetting your network settings.
    Settings.app -> General -> Reset - > Reset Network Settings
    CMIIW

  • [SOLVED] Network Manager systemd unit fails after update

    EDIT: Reinstalling libnm-glib resolved this issue
    After updating to the latest version of NetworkManager (networkmanager-0.9.8.10-3), the systemd unit fails to start. It works fine after downgrading back to the previous version though (networkmanager-0.9.8.10-1). I'm not sure if this is a bug or an error on my end; since the previous package works I've just dowgraded for the time being.  For the update that doesn't work, here is the output of "systemctl status" and the systemd journal:
    >>sudo systemctl daemon-reload
    >> sudo systemctl status NetworkManager
    ● NetworkManager.service - Network Manager
    Loaded: loaded (/usr/lib/systemd/system/NetworkManager.service; enabled)
    Active: failed (Result: exit-code) since Wed 2014-06-11 15:28:25 EDT; 10s ago
    Process: 24073 ExecStart=/usr/bin/NetworkManager --no-daemon (code=exited, status=127)
    Main PID: 24073 (code=exited, status=127)
    Jun 11 15:28:25 kyle systemd[1]: NetworkManager.service: main process exited, code=exited, status=127/n/a
    Jun 11 15:28:25 kyle systemd[1]: Failed to start Network Manager.
    Jun 11 15:28:25 kyle systemd[1]: Unit NetworkManager.service entered failed state.
    >> journalctl -xn
    -- Logs begin at Tue 2014-06-10 12:47:19 EDT, end at Wed 2014-06-11 15:28:36 EDT. --
    Jun 11 15:28:25 kyle sudo[24070]: pam_unix(sudo:session): session opened for user root by kyle(uid=0)
    Jun 11 15:28:25 kyle systemd[1]: Starting Network Manager...
    -- Subject: Unit NetworkManager.service has begun with start-up
    -- Defined-By: systemd
    -- Support: [url]http://lists.freedesktop.org/mailman/listinfo/systemd-devel[/url]
    -- Unit NetworkManager.service has begun starting up.
    Jun 11 15:28:25 kyle systemd[1]: NetworkManager.service: main process exited, code=exited, status=127/n/a
    Jun 11 15:28:25 kyle systemd[1]: Failed to start Network Manager.
    -- Subject: Unit NetworkManager.service has failed
    -- Defined-By: systemd
    -- Support: [url]http://lists.freedesktop.org/mailman/listinfo/systemd-devel[/url]
    -- Unit NetworkManager.service has failed.
    -- The result is failed.
    Jun 11 15:28:25 kyle systemd[1]: Unit NetworkManager.service entered failed state.
    Jun 11 15:28:25 kyle sudo[24070]: pam_unix(sudo:session): session closed for user root
    Jun 11 15:28:28 kyle dbus[489]: [system] Failed to activate service 'org.freedesktop.nm_dispatcher': timed out
    Jun 11 15:28:36 kyle sudo[24075]: kyle : TTY=pts/2 ; PWD=/var/cache/pacman/pkg ; USER=root ; COMMAND=/usr/bin/systemctl status NetworkManager
    Jun 11 15:28:36 kyle sudo[24075]: pam_unix(sudo:session): session opened for user root by kyle(uid=0)
    Jun 11 15:28:36 kyle sudo[24075]: pam_unix(sudo:session): session closed for user root
    Last edited by T0k3n (2014-07-03 15:18:01)

    Check the changes:
    https://projects.archlinux.org/svntogit … e192881dc5
    https://projects.archlinux.org/svntogit … ee906b6c44
    When posting configs, code or command output, please use [ code ] tags, not [ quote ] tags https://bbs.archlinux.org/help.php#bbcode
    like this
    It makes the code more readable and - in case of longer listings - more convenient to scroll through.

  • XP workstation services fail after 4.90 SP2 client imports

    Testing for a migration from ZFD 3.2 to ZDM 6.5 on the workstation with the new Novell
    Client 4.90 SP2.
    Our core XP SP1 ghost image (not OEM) restores to a Compaq D530 without issue and has
    Novell Client 4.83 SP2 with the ZFD 3.2 SP2 components (WM, RM and NAL NT services)
    installed on it. Allow sysprep and the post-driver and services to run and install.
    Reboot.
    Login to eDirectory and install Novell Client 4.90 SP2 with NetIdentity 1.2.2 and ZFD 3.2
    SP3 components (WM and RM, ZFD server is still ZFD 3.2 SP2). Reboot. Workstation is
    quick and stable, logs in fine with 4.90 SP2.
    Reboot again. Workstation initially appears to come up quickly then right around the time
    NWGINA pops up services start to drag/fail and it'll take several minutes to get to the
    point to actually enter my username and password. The enhanced GINA in SP2 detects
    networking has failed and checks Workstation Only automatically. Eventually get in
    Workstation Only. While the Explorer shell is responsive and appears stable, most
    services have failed or are hung in the process of starting.
    Stripping a box in this state of the most of its apps will bring it back close to its
    original speed, but you're left with networking and in particular the TCP/IP Protocol
    Driver "corrupt". As repair is not an option, I'm not aware of a way to remove and/or
    reinstall TCP/IP.
    I've tried Option^Explicit Software's WinSock XP Fix with no success.
    Breaking down our ACU install of 4.90 SP2 into parts and testing points back to the
    reinstall of Workstation Manager as the initiator.
    Back-revving wm.exe, wmcchlpr.dll and wmpm.dll in the 4.90 SP2 install to the 4.83 SP2
    (ZFD 3.2 SP2) level does not resolve.
    I have a feeling that is has something to do with after the WM components registering with
    the workstation and certain policies associating and coming down. But only three are
    available at "Scheduler Service Startup". NAL Workstation Association Agent, NT Client
    Configuration and Windows Group Policy. The Group policy is quite small and doesn't
    affect system-level stuff.
    Haven't yet tried toggling them off and see what affect disabling them has.
    Aside from opening a service request, any idea or anywhere else I should be looking or
    testing?
    Ironically, I have the 4.90 SP2 client working without issue in this setup using HP's OEM
    image for the D530.
    Tony Pedretti
    TransUnion LLC

    A combination of recreating the ZENworks Group Policies using a Windows 2000 box for
    reasons described in the previous posted TID and restoring wmgrppol.dll back to the build
    shipped in 4.90 SP2 (3/4/2004) prevents the issue from reocurring.
    I originally back-revved wmgrppol.dll to a test build (8/7/2002) Novell sent me prior to
    4.83 SP2 to work around an issue where local policies are being removed after restarting a
    workstation...
    Local Group Policies are removed after updating to client updates in ZfD32SP1Client.exe
    http://support.novell.com/cgi-bin/se...?/10079392.htm
    Looks like I can't have my Group Policies and ZENworks working too. That is until I move
    to 6.5. I hope.
    Tony Pedretti
    TransUnion LLC

  • Anyone else having "No service" problem after update to 6.1.3? iPhone 4S

    I went from iOS 6.0 to iOS 6.1.3 last week and now I have "No service". Happend right after update. I have done everything I can to try to fix it except restore to earlier iOS, which is not possible with iPhone 4S. My SIM works fine in my older iPhone 4 with iOS 6.0.
    I have tried to reset all settings, network settings, restore from DFU mode, recover/restore mode. As a fresh phone. NOTHING makes a difference.
    Anyone else having this problem? I now have a feeling that I have to pay for it to be fixed (probably just giving me a new phone). All just because I wanted to update my iPhone. This is Apple's fault, not mine. Thank you.

    Ok, I had the same issue, my phone is unlocked(iphone 5 with 6.1.3). So I went to the apple store and had it replaced. it worked good for a day and started doing the same thing. When the apple tech replaced my phone, he transfered my screen protector to the new one.
    so I thought it was my sim card, I put in my sisters sim card from a different carrier and it did the same, so then I was like let me take off the screen protector, and that was it.
    so guys, if you have a screen protector on your phone and it's doing "low signal", "No Service", "Searching", "Full bars cycle" then take off the screen protector. so far my phone is working normal.

  • "No Service" issue after updating iOS 8.1

    My iPhone 5 is really giving trouble after updating all iOS 8.01, iOS 8.02 & iOS 8.1. Cellular network is come to halt, "No Service" issue is regular and i am not able to use my iPhone 5 as phone. 
    Please help me out else i have to switch to some other phone.

    I have similar problem but with a 6:   bought new iPhone 6 four days ago, phone and 3G signal were fine in UK from Sat to Mon.   Yesterday, I traveled to Belgium and have had 'no service' problem since.   I am carrying a Nokia feature phone which is locked on to local network and working fine.  
    If I power off the iPhone and power on, it comes back and joins the network.   Five or so minutes later, it has dropped the network and will not re-attach if I put in/out of flight mode; needs power reset, and then drops again.
    It is conceivable that this is a carrier issue but given that Nokia is fine and all the postings that I'm finding on various discussion sites, then I feel that it is an iOS issue.   I'm booked in to visit the Apple Store at the weekend.   My previous iPhone 4S was running iOS 7 and had no such problems.  
    So, carrying an expensive brick at the moment and hoping for an iOS update that will resolve this. 

  • Z10 Location services kaput after update 10.2.1.537

    I updated my phone to 10.2.1.537 recently and noticed after that my location services do not work at all anymore. My location services says that it is on under settings but it will not locate me when i open an app. I usually use gasbuddy app and native blackberry maps and when i open the app it shows me where i was last before the update and says that location services are off when they are definitely on since i manually switched it on in the settings. I have tried turning location services off and on many times, restarted my phone hard and soft restart and have done a system restore (due to the picture password malfunction after update the picture password would not let me into my phone after crashing 2 days afer update) much to my dismay since i have downloaded and deleted a bunch of apps since my last backup. I am wondering if this a common problem or is blackberry planning on fixing this or if there are any patches or some tricks of any kind that i can use to make my location services to work again. Definitely not happy with the new OS, thats not to say that they didnt put alot of new exciting features into the new OS but for me this has been awful as i have been without a phone essentially since the update. All help is appreciated, Thanks Mark

    markymarkwahlberg wrote:
    I updated my phone to 10.2.1.537 recently and noticed after that my location services do not work at all anymore. My location services says that it is on under settings but it will not locate me when i open an app. I usually use gasbuddy app and native blackberry maps and when i open the app it shows me where i was last before the update and says that location services are off when they are definitely on since i manually switched it on in the settings. I have tried turning location services off and on many times, restarted my phone hard and soft restart and have done a system restore (due to the picture password malfunction after update the picture password would not let me into my phone after crashing 2 days afer update) much to my dismay since i have downloaded and deleted a bunch of apps since my last backup. I am wondering if this a common problem or is blackberry planning on fixing this or if there are any patches or some tricks of any kind that i can use to make my location services to work again. Definitely not happy with the new OS, thats not to say that they didnt put alot of new exciting features into the new OS but for me this has been awful as i have been without a phone essentially since the update. All help is appreciated, Thanks Mark
    Location Services are part of some apps. They may be using the GPS feature as well as the Network to give you a more precise lock on your location. You said you are using gasbuddy app but location won`t work. Are you having this problem with the Blacberry Map? What other apps you have that are using Location Services?

  • OBIEE Start/Stop Services failed(After LDAP Configuration)

    Hi ,
    We made some changes(that is we have added new OID
    and configured the new OID based upon the Oracle BI security guide which is in Oracle Site
    ) to the LDAP configuration in OBIEE web console and it prompted for a restart of the OBIEE services . when we tried restarting the services we are not able to stop all the services . Please find the attached log files .
    Note:
    1.unable to kill the process ID
    which is releated to OBIEE 11.1.1.6.0 services..
    2.We have follwed the section 3 in the below link to configure the LDAP : http://docs.oracle.com/cd/E23943_01/bi.1111/e10543/toc.htm.
    Please find the below error details in short form and kindly find the attahced file(file name) for more details
    Error:
    Caused By: oracle.security.jps.service.igf.IGFException: JPS-02597: You configured a custom Authentication Provider or WLS generic LDAPAuthenticator, which the libOvd can not recognize. Supply the idstore.type property in jps-config.xml file, or use a specific WLS LDAP Authentication provider that matches your LDAP server instead of a generic one.
    at oracle.security.jps.internal.api.identitystore.IdentityStoreConfigurationUtil.checkIdStoreTypeLater(IdentityStoreConfigurationUtil.java:819)
    at oracle.security.jps.internal.api.identitystore.IdentityStoreConfigurationUtil.getLibOvdLdapPushData(IdentityStoreConfigurationUtil.java:524)
    at oracle.security.jps.internal.igf.ovd.OvdIGFServiceProvider$1.run(OvdIGFServiceProvider.java:232)
    at oracle.security.jps.internal.igf.ovd.OvdIGFServiceProvider$1.run(OvdIGFServiceProvider.java:229)
    at java.security.AccessController.doPrivileged(Native Method)
    Truncated. see log file for complete stacktrace
    >
    <Jan 29, 2013 6:39:05 AM CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
    <Jan 29, 2013 6:39:05 AM CST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
    <Jan 29, 2013 6:39:05 AM CST> <Notice> <WebLogicServer> <BEA-000365> <Server state cha
    Error Codes
    Problem Category/Subcategory
    BI EE Platform Administration/Administration Tool
    Uploaded Files
    File: nohup.zip:134848
    Template Question Responses
    1) ### Admin Tool version ###
    2) Are you running Oracle Business Intelligence Enterprise Edition using virtualization or partitioning technologies (for example, VMWare) ?
    No
    3) If yes, please provide the product used and its version.
    4) ### Documentation Used ###
    5) ### Impact on Business ###
    Edited by: 919942 on Jan 31, 2013 5:10 AM

    "JPS-02597: You configured a custom Authentication Provider or WLS generic LDAPAuthenticator, which the libOvd can not recognize. Supply the idstore.type property in jps-config.xml file, or use a specific WLS LDAP Authentication provider that matches your LDAP server instead of a generic one."
    Looks like the config you entered was a tad off. Any chance you can roll back by restoring the original files from before the change?
    $FMWH/user_projects/domains/yourdomain/config/config.xml
    $FMWH/user_projects/domains/yourdomain/config/fmwconfig/jps-config.xml
    In the config.xml, inside the <realm> tag yo ushould find your authenticaiton providers and there's two important things for your new one to check:
    1.) xsi-type="wls:..." <-- This should be your OID type rather than a generic (or wrong) one
    2.) If you're not 100% sure about the config or don't want to immediately shut out native WLS users or want to retain them (both OID and WLS LDAP considered valid), then PLEASE make sure that you run your new authenticator with <sec:control-flag>SUFFICIENT</sec:control-flag> and don't make it REQUIRED since otherwise you won't be able to bring anything up anymore if a single parameter in the authenticator config is off...
    Also, check out what Tony wrote together a while back: http://www.peakindicators.com/index.php/knowledge-base/115-oracle-bi-11g-security-troubleshooting
    Update:
    Should have read the error message more carefully...looks like you actually just slipped by one line in the authenticator config and chose "OracleVirtualDirectory" instead of "OracleInternetDirectory" since it tries to use the libOvd rather than the OID one.
    Edited by: Christian Berg on Jan 31, 2013 2:58 PM

  • Build failed after updating to CTP 3.1

    Hi,
    After updating to CTP 3.1, I created a blank cordova project and tried to build it.It shows build failed.I can see a warning - The typescript file was given no files for compilation .However this shouldn't stop the build ?
    Please advise.

    Set your build verbosity to diagnostic (Tools>Options>Projects and Solutions>Build and Run>Set MSBuild project build output verbosity= Diagnostic) and rebuild your project.   The added details should reveal why the build is failing. 
    -Ellen

  • Shadow.service fails after LightDM uninstall

    Hi,
    Since I've uninstalled Light-locker (and LightDM as a dependency) I receive the following error:
    ● shadow.service - Verify integrity of password and group files
    Loaded: loaded (/usr/lib/systemd/system/shadow.service; static; vendor preset: disabled)
    Active: failed (Result: exit-code) since di 2015-03-24 19:43:48 CET; 45min ago
    Process: 315 ExecStart=/usr/bin/pwck -r (code=exited, status=2)
    Main PID: 315 (code=exited, status=2)
    mrt 24 19:43:47 zeus pwck[315]: user 'lightdm': directory '/var/lib/lightdm' does not exist
    mrt 24 19:43:48 zeus pwck[315]: pwck: no changes
    mrt 24 19:43:48 zeus systemd[1]: shadow.service: main process exited, code=exited, status=2/INVALIDARGUMENT
    mrt 24 19:43:48 zeus systemd[1]: Failed to start Verify integrity of password and group files.
    mrt 24 19:43:48 zeus systemd[1]: Unit shadow.service entered failed state.
    mrt 24 19:43:48 zeus systemd[1]: shadow.service failed.
    Can anyone help me fix this?
    Thanks in advance!
    Last edited by VenomGameworld (2015-03-24 18:35:15)

    Spider.007 wrote:It's interesting the package creates the user on install, but doesn't remove it on uninstallation. I wonder if this is intended by the maintainer.
    https://projects.archlinux.org/svntogit … de9766105a is the change that removed user and group deletion.

  • Aperture fail after updating to snow leopard

    after updating to snow leopard, aperture 3 is not working - i have downloaded aperture update 3.1.1, but now it is saying i must have aperture 3 when i try to run it - which i already have???, any help greatly appreciated, thanks.

    Doh! - It had "original" in the filename. Renamed it and run the update successfully... All working well, thanks for your patience... Still getting used to Macs.
    Thanks again.

  • [Solved] Netctl fails after update

    Netctl fails on all wireless connections, with existing profiles or not.
    The output of systemctl status netctl@wlp18s0\x2dKALAPPURACKAL.service is
    [email protected] - Networking for netctl profile wlp18s0x2dKALAPPURACKAL
    Loaded: loaded (/usr/lib/systemd/system/[email protected]; static)
    Active: inactive (dead)
    Docs: man:netctl.profile(5)
    got this error after after an update yesterday, or may be i removed network manager along with the update(might be blunder)
    output of systemctl status | grep net
    sys-devices-pci0000:00-0000:00:1c.1-0000:12:00.0-net-wlp18s0.device loaded active plugged Centrino Advanced-N 6200 2x2 AGN
    sys-devices-pci0000:00-0000:00:1c.5-0000:16:00.0-net-enp22s0.device loaded active plugged RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
    sys-devices-pci0000:00-0000:00:1d.0-usb2-2\x2d1-2\x2d1.3-2\x2d1.3:1.0-net-usb0.device loaded active plugged Android
    sys-subsystem-net-devices-enp0s29u1u3.device loaded active plugged Android
    sys-subsystem-net-devices-enp22s0.device loaded active plugged RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
    sys-subsystem-net-devices-wlp18s0.device loaded active plugged Centrino Advanced-N 6200 2x2 AGN
    netctl@wlp18s0\x2dKALAPPURACKAL.service loaded failed failed Networking for netctl profile wlp18s0-KALAPPURACKAL
    netctl@wlp18s0\x2dproject1.service loaded failed failed Automatically generated profile by wifi-menu
    system-netctl.slice loaded active active system-netctl.slice
    network.target loaded active active Network
    the profile i am trying out now is
    Description='Automatically generated profile by wifi-menu'
    Interface=wlp18s0
    Connection=wireless
    Security=none
    ESSID='KALAPPURACKAL'
    IP=dhcp
    Last edited by nu11_p01n73R (2014-03-03 04:15:31)

    Try downgrading wpa_supplicant. Sounds like a similar problem to this:
    https://bbs.archlinux.org/viewtopic.php?id=177875
    See my entry at the end.
    Cheers,
    Steve.

  • Toshiba EXCITE Pro - WIFI connection. Authentication failed after update

    Hello.
    Just received this Tablet.
    Everything seemed ok while updating to the latest version (did that first to solve the heat problems).
    After the last update *i lost my WIfi connection. Authentication failed* (didnt change something - was connecting - updating ok 1 minute before the last update).
    After that i started testing ,Wps connection , No security Wifi etc etc.
    *Finally at a random time (and with the initial settings) i got connected*. After i shut down the tablet the same problem occured.
    After doing the same things again i finally got connected and this time it seems to be ok, even after i shut down the tablet.
    However this is frustrating.
    Maybe you have to sort this out?
    I have seen and other people returning this tablet after having this problem.
    It is not a hardware problem since its working ok before the update.
    Of course tried factory reset twice.
    Hope i dont have this problem again, *but i am informing in hope that you fix this in a future update.*

    Toshiba sent me the fix for this. Figured I would use Facebook and they sorted a solution straight away.
    It requires a complete reset. Not the soft reset from within Android.
    I'll post it here as they will check through moderation I guess.
    Thanks for sending a private message Ben. For us to get this resolved for you we would advise to perform a reset from the Android system recovery menu, to do the reset please follow these steps:
    The reset process will delete any data, settings, and applications on your tablet. You must have a backup of any data you wish to keep before proceeding.
    1. Make sure the tablet is off and not in standby.
    2. Hold down the Volume Up and Power buttons simultaneously until the two Android icons appear.
    3. Use the volume buttons to select the white box on the right.
    4. Once selected, press the power button.
    5. Use the volume buttons to select wipe cache partition and then press the power button.
    6. Select Yes and press the power button.
    7. Use the volume buttons to select wipe data/factory reset and then press the power button.
    8. Select Yes and press the power button.
    9. The tablet will now reset.
    If you have any issues after the reset please get back to us as soon as possible!
    Its been working well ever since. I guess the cache clean part might be the main one. You'll have to select the reboot yourself as I did at the end.
    Might be best to use Facebook i'll see if I can find my post as the response was quick and efficient unlike their responses in here. I.e nowt from them so far.
    They needed my name and serial numbers probably to log problems etc.
    Message was edited by: bensimmo

  • Device Page Service Error after updating from 2.8.0 to 2.8.2

    Hi all,
    today, I updated my demo server ZENworks MDM from the version 2.8.0 to the version 2.8.2. After this update i cannot display users and devices in dashboard. When i click on the Users tab, i`m getting the error: "Device Page Service Error. Unable to complete operation. If this error persists, please contact ZENworks Technical Support." But I`m able to login as user to the self service portal and also i see my user and his device in the Activity Monitor.
    Please, how can i solve this issue?
    Thanks
    Milan

    Strange... i rebooted server and it does not help. I wait few minutes and now it`s working
    Any self-correcting error?

Maybe you are looking for

  • Time out while activating Data Source

    Hi All, I am faced with a problem. I am trying to load a cube from a flat file Data Source. I create the data source and save it, but when i try and activate it...it just keeps running for a long time and gives a timeout error. I have created Info Ob

  • How to embed mplayer in Linux with JNI

    Hello All, I was wondering if anyone here knows to get a Linux based video player to draw on the awt Canvas. I am trying to play the streaming video in ASX / WMV format on Linux. And MPlayer is one such player that can play almost anything. For windo

  • Display only works when 1/4 open

    Hi, Recently I have noticed that my display wasn't working - I thought it was due to PGP encryption software that was required for work, however I was allowed to remove the PGP when I updated to 10.7.2 as it has full disk encryption. Then I noticed -

  • Multiple notifications for an Inspection lot

    Hello I  would like to create one notification by defect  keyed for an inspection lot . If I work with serial numbers I can create one notification by defect If I don't use serial numbers , all defects are linked to a single notification even though

  • How to sync or backup System Preferences

    I have an iMac with Yosemite now, but come from a Windows environment. In Windows 8 or higher, there is a profile sync feature included, which syncs every single System Preferences setting (such as keyboard layout, time zone, display settings, sharin