Empty message after call
When my Skype contacts call me i get en empty message. Sometimes a get en empty message after a call too.. Ex. When my dad calls me, i get an empty message shortly before i recieve his call.
Attachments:
Udklip.PNG 8 KB
Hi Lucky,
Try this.
data: wl_opt type ctu_params.
wl_opt-updmode = 'S'.
wl_opt-nobinpt = 'X'.
wl_opt-dismode = 'A'. "'N'.
wl_opt-nobiend = 'X'. "Simulate background mode
CALL TRANSACTION 'XD02' USING bdcdata OPTIONS FROM WL_OPT
MESSAGES INTO messtab.
LOOP AT messtab.
WRITE: / messtab.
ENDLOOP.
I was getting in all mode the messtab.
Sujay
Similar Messages
-
Startrfc: Error message after calling a FM/report
Hello Experts,
I am working on a solution to call a RFC function module from outside of SAP via startrfc. This FM opens a report displaying standard report output.
The call via startrfc works as expected. The sapgui opens. As long as the report is open the startrfc command console hangs. When I close the SAPGUI window with the report, logoff popup is displayed. But in the console I got an error message:
RFC Call/Exception: SYSTEM_FAILURE
Group Error group 104
Key RFC_ERROR_SYSTEM_FAILURE
Message connection closed without message <CM_NO_DATA_RECEIVED>
Does anybody kow what causes this behavior? And further on: can I change the behavior that the startrfc call blocks the console? Why does it not return immediatly?
Any hints are welcome?
Regards,
AndreasYes, we are using RAS. Our setup is BOE XI 3.1 on Linux. We are using the RAS/CrystalReportViewer java API to execute/view the reports from a JBoss server also running on Linux.
We did find a CRConfig on the BOE server and it did contain a <SocketTimeout>60000</SocketTimeout> entity. We modified it to 600000 and restarted the BOE service. Unfortunately, we still the same problem ("Failed to retrieve data from the database; Error in File {B608A22A-1E54-11E0-ABFC-000E0CB8A71E}.rpt: Failed to retrieve data from the database").
We thought that when using the CrystalReportViewer java API, rendering is done "locally" (that is, on our web server). In that case, shouldn't we have a CRConfig.xml on our web server? We're seeing conflicting information about this on the forum. If we do need CRConfig.xml on our web server, then should we copy it from the one on the BOE, and where should we put it? -
To capture messages after CALL Transactiom
Hi all,
I am doing call transaction for IM32,CJ30 and IM52.But iam unable to capture the messages.
when we enter a wrong budget values then it throws a error message saying 'Errors found-> see error log'(The same is present in BDCMSGCOLL). But we need the errors present in the error log not the error which mentioned above.
So is there any possible way to catch those errors. Please help as early as possible.
Thanks
sagar.hi ,
use the function module FORMAT_MESSAGE
like this,
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = tb_msgtab-msgid
lang = sy-langu
no = tb_msgtab-msgnr
v1 = tb_msgtab-msgv1
v2 = tb_msgtab-msgv2
v3 = tb_msgtab-msgv3
v4 = tb_msgtab-msgv4
IMPORTING
msg = tb_messages-message
EXCEPTIONS
not_found = 1
OTHERS = 2.
regards,
venkat.
Edited by: venkat appikonda on Mar 13, 2008 10:29 AM -
Contacts are placed into my messages after call?
Anytime I call or two way someone when I'm done there is a small icon at the top of my screen and the contacts are placed in my messages with an option to send my info. Is there anyway to fix this?
NM fixed it.
-
My iphone 4s is no longer making sound when i have an incoming call or message after installing ios7.... any help?
It still vibrates but no calling sounds or message sounds. It's not on mute and the speakers are working... I can hear music etc.
Oh yeah no keypad noises either.Same thing has happened to me. I have tried every trick that's been posted here. I just ran out of options. Galaxy phone is starting to look better by the minute.
-
Phone no longer can send / receive picture messages after "support" call
Hoping someone can help.
A few weeks ago my phone was having intermittent problems sending picture messages (text are fine). I would sometimes have to retry several times for it to go through, but I could always get it to go through. I have a LG VX9400, btw.
Since it did not resolve itself I decided to place a support call. During that call the technician did "nothing", but after he had me dial *228 option 1 I can no longer send messages at ALL! I was then told I needed a software upgrade or could not be helped further. Now I've received the software update and it still does not work. It has been escalated to engineering and closed (without contacting me) and has been attributed to my phone, but nobody can tell me how they came to this resolution.
I have had this problem in the past where it's been on the Verizon network the configuration has to be changed (there have even been blocks that I've never put on there), but nobody is willing to dig into this and says I now have to reflash, hard reset my phone or get another one.
Also note, mobile web even for account management doesn't work (I did have blocks, have since taken them off so not sure if I have to wait). It also seems I am getting a message receipt failed when I turn my phone off and on, again I only noticed this after calling support.
Any help / suggestions / etc greatly appreciated as I really don't think it's my phone since it was working (albeit intermittent) prior to the "support" I received from Verizon.
Thanks!!@MySlickDeals
It's very upsetting having picture messaging issues, especially after calling in to technical support and not getting the issue resolved. Let's get this worked on right away.
Have you tried deleting the old text and picture messages and retrying? Please also remove and reinsert the battery and retest.
Does this happen everywhere or just one location? After the software upgrade did they hard reset the device?
Hard reset instructions:
From the main screen, press Menu.
Scroll to Settings & Tools.
Scroll to Phone Settings, press OK.
Scroll to Security, press OK.
Enter Lock Code ???? displays,
enter the 4 digit lock code ( default: last 4 digits of phone number ).
Scroll to Reset Default, press OK.
Reset Default - Preference Settings will be set to factory defaults. Press <OK> to continue. displays, press OK.
Scroll to Revert, press OK
If you are still experiencing issues after this reset please send me a PM and I will look into your account.
Thank you -
Dear Apple Customer Care
I am using iphone4, guide me how to stop after call summary messages. it is eating up my battery lifte in dataunfortunately, the only time I can see a call summary is right after the call is completed on a wp device.
the only thing you can see after that is if you open phone and it will show you if incoming/outgoing/missed, and if you tap on that name or number of the caller, just opens to their contact info, where you can swipe left to see the history, but this is not detailed. tapping on the call, or calls would only start to call them again. -
Suppressing status bar message after function call?
Hi,
I'm calling a few functions in a program.
After calling them, for example function "L_TO_CREATE_DN", I get a message in the status bar, in this case saying that a TO has been created successfully.
How can I suppress all status bar messages for all the functions that are being called in the program?
THX!Hi
Try to use the default excption error_message
CALL FUNCTION
EXCEPTIONS
error_message = 1
OTHERS = 2.
Max -
How do I retrieve my recent calls and recent text messages after I restored the settings
How do I retrieve my recent call log and recent text messages after I had to restore the settings?
If they were in your most recent back up and you restore your phone to that back up, you'll get them back. If they're not in the back up, there's no way to get them back.
-
Revision: 7197
Author: [email protected]
Date: 2009-05-21 14:49:44 -0700 (Thu, 21 May 2009)
Log Message:
Bug: BLZ-354 - Client still polling after calling ChannelSet.logout() when subscribed to messaging destination.
QA: Yes
Doc: No
Checkintests: Pass
Details: In polling channels, stop polling as soon as logout ack is received.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-354
Modified Paths:
flex/sdk/branches/3.x/frameworks/projects/rpc/src/mx/messaging/ChannelSet.asAny advice would be helpful. Thanks
-
HT1338 debugger called panic message after updating computer is now stuck?
debugger called panic message after updating my macbook pro...computer is stuck
Attempt to boot into Safe Mode If it does, download and run this app: http://www.etresoft.com/etrecheck
Post the results.
Also, open Console, click on System Diagnostic Messages in the log list, and see if the Kernel Panic log is there. If so, copy and paste the results here. -
Error messages when calling RSDRI_INFOPROV_READ for more than one time
Hello all,
I need to write a cube, however, before I do this I need to check whether there are already data in the target cube for a certain accounting period. This I do by reading the cube via FM RSDRI_INFOPROV_READ. The following coding is called from a running program after pushing a button on the screen.
<i>* clear internal tables.
CLEAR gt_range.
CLEAR gt_sfc.
*fill internal tables
CLEAR ls_sfc.
ls_sfc-chanm = '0FISCPER'.
ls_sfc-chaalias = '0FISCPER'.
ls_sfc-orderby = 0.
INSERT ls_sfc INTO TABLE gt_sfc.
CLEAR ls_range.
ls_range-chanm = '0FISCPER'.
ls_range-sign = rs_c_range_sign-including.
ls_range-compop = rs_c_range_opt-equal.
ls_range-low = '2007001'.
APPEND ls_range TO gt_range.
here I do not know what exactly to do with this flag
lf_first_call = abap_true.
CALL FUNCTION 'RSDRI_INFOPROV_READ'
EXPORTING
i_infoprov = 'T01'
i_th_sfc = gt_sfc
i_th_sfk = gt_sfk
i_t_range = gt_range
i_packagesize = 1
IMPORTING
e_t_data = lt_rd_cube
e_end_of_data = lf_eod
CHANGING
c_first_call = lf_first_call
EXCEPTIONS
illegal_input = 1
illegal_input_sfc = 2
illegal_input_sfk = 3
illegal_input_range = 4
illegal_input_tablesel = 5
no_authorization = 6
illegal_download = 7
illegal_tablename = 8
trans_no_write_mode = 9
inherited_error = 10
x_message = 11
OTHERS = 12.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
lf_eod = abap_false.
IF NOT lt_rd_cube IS INITIAL.
RAISE target_data_found.
EXIT.
ENDIF.</i>
When testing with a period for which data already exists, it runs through quite perfectly. The return table is filled and I know that data exists and I EXIT.
However, if I press the button again (program is still running) I get an error message 'Nested call of RSDRI_INFOPROV_READ'. And this for each time I press the button.
So I thought I should clear the flag lf_first_call. After having done so I get an error message 'SQL Error'. Funny is that I get this error only every second time the Function Module is processed. Every other time it works perfectly.
How can I get rid of those error messages?
PLEASE - can anybody help me?
Many thanks in advance,
ThomasHi,
you have something like:
end_of_data = ' '.
first_call = 'X'.
WHILE end_of_data = ' '.
CALL FUNCTION 'RSDRI_INFOPROV_READ'
EXPORTING i_infoprov = ....
i_th_sfc = ...
i_th_sfk = ...
i_t_range = ...
i_reference_date = ...
i_save_in_table = ....
i_save_in_file = ....
I_USE_DB_AGGREGATION = ...
i_packagesize = 100000
i_authority_check = ...
IMPORTING e_t_data = .....
e_end_of_data = end_of_data
CHANGING c_first_call = first_call
EXCEPTIONS illegal_input = 1
illegal_input_sfc = 2
illegal_input_sfk = 3
illegal_input_range = 4
illegal_input_tablesel = 5
no_authorization = 6
ncum_not_supported = 7
illegal_download = 8
illegal_tablename = 9
OTHERS = 11.
ENDWHILE.
hope this helps...
Olivier. -
Trying to update frpm itunes 10 to itunes11, but get error message after installation
I am trying to update my itunes to be compatible with my replaced iphone 4s (apllecare replacement) that is not compatible with my current iTunes 10.6. I have tried several times to upload th enew version of iTunes to no avial getting an error message after a "successful installation" and the itunes reverts to 10.6. Since my imac was an older unit I had to update to OSX 10.6.8 (sucessfully) and increase my RAM. I am 120bucks in the hole plus the 49 dolar surcharge for the iphone replacement and i am still no closer to restoring my phone. Help please
First backup your music and content.
Then delete iTunes 10.6 Drag the application from Finder > Applications to Trash. Empty Trash
Try and install 10.7 first iPhone 4s will work with this. You can find the download here
http://support.apple.com/kb/DL1576
Install it. Does itunes 10.7 now appear? Is your content all there? Connect up your iPhone and start syncing.
From there if you want to you can upgrade to iTunes 11 but it is only necassary if you have an iPhone 5 -
Receiver file adapter creates empty files, Empty-Message Handling SP19
Hello,
We have just upgraded the system to SP19.
One of the new features is that it should be possible to determine how XI messages with an empty main payload are to be handled in the receiver file adapter.
If the parameter Empty-Message Handling is set to 'Ignore' no file should be created if the main payload is empty. In our case an empty file (size 0 kb) is still created even though the main payload is empty and the flag is set to 'Ignore'.
Has anybody experienced the same problem?
// Best regards HansThis should work:
Use your own adapter module that parses incoming message and checks if it has any record sets in the document. If it does not have any record sets, then set the message to empty and then give this modified message to File receiver.
For example, see the example code below:
Module imports..
Audit log import..
DOM imports/SAX imports..
public ModuleData process(ModuleContext moduleContext, ModuleData inputModuleData) throws ModuleException {
try {
// get the XI message from the environment
Message msg = (Message) inputModuleData.getPrincipalData();
AuditMessageKey amk = new AuditMessageKey(msg.getMessageId(),AuditDirection.INBOUND);
Audit.addAuditLogEntry(amk, AuditLogStatus.SUCCESS,"RemoveRootTag: Module called");
XMLPayload payLoad = msg.getDocument();
Document doc = parseXmlFile(payLoad.getInputStream());
if(doc != null){
if(!doc.getDocumentElement().hasChildNodes()){
Audit.addAuditLogEntry(amk, AuditLogStatus.SUCCESS, "Document is empty!!");
payLoad.setContent("".getBytes());
msg.setDocument(payLoad);
// provide the XI message for returning
inputModuleData.setPrincipalData(msg);
} catch (Exception e) {
// raise exception, when an error occurred
ModuleException me = new ModuleException(e);
throw me;
// return XI message
return inputModuleData;
private Document parseXmlFile(InputStream xmlpayload) {
try {
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
factory.setValidating(false);
// Create the builder and parse the file
Document doc = factory.newDocumentBuilder().parse(xmlpayload);
return doc;
} catch (SAXException e) {
} catch (ParserConfigurationException e) {
} catch(IOException e){
return null; -
How to process an output message after pick and pack in LM46?
Hi,
I've implemented the User Exit to print the HU using LM18, it's working great but no output message is processed (and indeed, the sticker is printed on my own printer instead of the one defined in my Z custom output message).
I used LM46 to pick and pack the HU, am i missing a step?
In other words, how to process my custom output message after the pick and pack?
Is there some code I must add in the LM18 User Exit?You know, in a user exit or a BADi you can access any variable of the program you want.
Just find what which program calls the Exit User, put a break-point in it, and find the variable you need to access.
Then add this kind code in your Exit :
DATA: l_var TYPE ....
FIELD-SYMBOLS: <fs_var> TYPE ANY.
ASSIGN ('(PGMNAME)variable') TO <fs_var>.
IF sy-subrc = 0.
l_var = <fs_var>.
ENDIF.
Same thing for a table :
DATA: lt_var TYPE TABLE OF....
FIELD-SYMBOLS: <fs_var> TYPE ANY.
ASSIGN ('(PGMNAME)table[]') TO <fs_var>.
IF sy-subrc = 0.
lt_var[] = <fs_var>.
LOOP AT lt_var ASSIGNING ...
ENDLOOP.
ENDIF.
Maybe you are looking for
-
Sync'ing Photos with iTunes causes smaller pictures in albums on iPhone?
Hello out there. I'm using iOS 7.0.3 with iTunes 11.1.3.8 (Win). After synchronising my Pictures, which are stored in different albums, the larger files got to smaller size (about max. 4 MP). Before they were stored in original size on the iPhone, ev
-
Please Help! click wheel doesn't respond at all!
I was running with my brand stinking new ipod 60 gb color and then when i tried to use the clickwheel, it did not respond at all. The play and menu and all the other buttons including select won't work and i can't scroll using the clickwheel. I'm in
-
Vendor Hierarchy - Creating Master Record for a Vendor Hierarchy node
Hi gurus, I have configured the Vendor hierarchy as per procedure. What is the T code/path to create the master record for a vendor hierarchy node? Also please let me know the procedure to map the existing vendors to the hierarchy. Thanks and regards
-
Lightroom 4.3 Import Issue?
Not sure if this just happened lately with the 4.3 update or not but I have noticed strange import behavior that I could swear was not happening a short while ago... I typically format my cards in camera except when I am testing things and doing a lo
-
On touchpad et mon clavier ne répondent plus
J'ai un MacBook Pro acheté en mars 2013. Depuis 2 mois, de façon intempestive et fréquemment il arrive que mon touchpad et mon clavier ne répondent plus. Il faut alors éteindre le MBP et le redémarrer. Mais cela peut reprendre immédiatement ou reste