Empty rows in a table should not be displayed

Hi,
I have an ADF table which contains 10 rows and 5 columsns,
in which i have rendered all the values in 5 columns of 5 rows to false.
But when displaying the table,the empty rows are displaying by overlapping..
I do not want to display those empty rows.
Thank u
Bhanu

Duplicate of How to make some rows of a table invisible
Frank

Similar Messages

Count of non-empty rows of a table

How to I get the number of non-empty rows of a table ?
Thanks

You can loops through the rows and check whether any cell is empty or not? Use a counter variable to increment the same.
Thanks,
Bibhu

CO-PA: Quantity should not be display in KE30 reports

Dear All,
In my system CO-PA is activated 2 years back. Costing based & Accounting based OC.
My Client requirement is- Recently we developed few CO-PA reports with number of characteristics, Values flow from SD-->CO-PA is good.
We have some free products. Free products will flow to CO-PA along with Valuated products. Both Free and valuated sales will happen one sales invoice only.
In Sales invoice PR00 will be Zero for Free Products but COGM will be there. COGM is updating from VPRS fine.
Now my requirement is Free products COGM shoud be display in KE30 reports but Quantity should not be Display.
Reason: When i put a formula per packet COGM is Total COGM value/Number of Packets. In this packets free products also there.
So. COGM will wrong due to Free samples packets should not be treated as SALES.
This COGM also add to the valuated products COGM.
So, any one help me in this regard: COGM value related to free products should flow to CO-PA but Quanity should not flow.
And also let me know if Qty flow to CO-PA also no issue but in KE30 Reports,It should not come only COGM value sufficient.
Thanks in Advance,
Rgds
Manoj Kumar Pedada
SAP CO Consultant

hi
check this link regarding free goods delivery, this may help you in some way
there are different scenarios explained here what you need to follow for free goods sale and how it will update in COPA based on your requirement
http://help.sap.com/saphelp_46c/helpdata/en/dd/55fa68545a11d1a7020000e829fd11/content.htm
krishna

Deleting the Row from the table is not refreshing the contents in the form

Hi,
We developed a table and form in the same UI based on the following suggestion.
Display and edit currently selected row of ADF Table in ADF Form
1. Created one view object based on the employees table.
2. dragged the view object to the UI as table.
3. dragged the view object as form.
4. set partial triggers on the form's container (panelformlayout) as tableId.
Tested the application with the edit options and everything is working fine. But the problem comes when we delete the record from table. it is not refreshing the form based on the newly selected row after deleting the record. If we commit the data the form contents are updated to the selected row (which is not desired).
Can you please suggest how to fix the issue, refreshing the form with the selected row after deleting the records.
Thanks and Regards,
S R Prasad

The Code snippet looks fine. I think, the issue is in the partial trigger setting
4. set partial triggers on the form's container (panelformlayout) as tableId.In order to the table to get refreshed, the table's partialTriggers property should be set to id of the delete Button.
Go to table, select partialTriggers in the Property Inspector, Click on Expression Builder at the right and select the delete Button.
Can you set this and check?
Sample Code:
<af:panelHeader text="panelHeader 1" id="ph1">
<f:facet name="context"/>
<f:facet name="menuBar"/>
<f:facet name="toolbar">
<af:commandButton text="Delete" id="cb1"/>
</f:facet>
<f:facet name="legend"/>
<f:facet name="info">
<af:table var="row" rowBandingInterval="0" id="t1"
partialTriggers="::cb1">
<af:column sortable="false" headerText="col1" id="c1">
<af:outputText value="#{row.col1}" id="ot1"/>
</af:column>
<af:column sortable="false" headerText="col2" id="c4">
<af:outputText value="#{row.col2}" id="ot3"/>
</af:column>
<af:column sortable="false" headerText="col3" id="c3">
<af:outputText value="#{row.col3}" id="ot4"/>
</af:column>
<af:column sortable="false" headerText="col4" id="c5">
<af:outputText value="#{row.col4}" id="ot2"/>
</af:column>
<af:column sortable="false" headerText="col5" id="c2">
<af:outputText value="#{row.col5}" id="ot5"/>
</af:column>
</af:table>
</f:facet>
</af:panelHeader>
Thanks,
Navaneeth

Appending empty rows in internal table

Hi,
i am using table control, where there is a condition, some row may left empty. end if i press enter button the empty row is filled by the next available record. My need is to pick the records in the table control to the internal table including the empty rows as it is.

Hi Karthikeyan,
By default with user pressinng enter, empty rows will get deleted.
How are you populating your table control? Is it from standard transaction or your internal table?
If it is from your internal table, you can add anothe flag field for empty row.
Whenever row is empty in your internal table, mark flag field as 'X', so in the table control you these entries will not get vanished with pressing of enter.
This is one idea and you can build on this. You can make this flag column as non editable so that no one can change these.
hope this helps,
ags.

How to remove an empty row after a table anchor?

We are using FrameMaker 12 on a Windows 7 (64 bit) platform.
I am working my way down a chapter of training content. I am halfway down the chapter, and—as fate would have it—I need to start a table at the top of a page.
When I insert a table (with a caption/title at the top), FM creates an anchor at the top of the page. The space to the right of the anchor is a blank line. I actually want the table to start at the top of the page without the blank line to the right of the anchor.
This is what I tried, with the results:
I put the cursor after the anchor, and press Delete.
Result: The text *below* the table is brought up above the table.
I put the cursor after the last bit of text on the previous page, and press Delete.
Result: The paragraph on the previous page moves down to the next page on top of the table, leaving a large blank space on the previous page.
I change the Start option (on Table Designer) to Top of Column (or Top of Page).
Result: FM leaves the anchor where it was, moves the table down to the next page, and leaves a totally empty page where the table used to be.
Is there any way to just move the table up so that it is on the same line as the anchor?
(And as a tool design issue, is there EVER a reason why a content developer would want an entire blank line above of a table?)
Thank you in advance,
Tim

I've always thought it strange that FrameMaker doesn't properly butt
tables against the top of a column by default. Here's how to make tables
do it.
1. First, in the Table Designer, on the Basic tab, set Spacing Above to
a negative number, such as -2.0 pt, for the table. (You probably want to
update all of your table styles to use this number by default.)
2. Create an anchor paragraph style to hold tables, perhaps naming it
TableAnchor. In the Paragraph Designer, on the Basic tab, set Spacing
Below Pgf to the same negative number, such as -2.0 pt, for this
paragraph style and select the "Fixed" checkbox. On the Default Font
tab, set the font to the same number, but positive-- such as 2.0 pt.
3. Now, whenever you want to insert a table, first insert a TableAnchor
paragraph to hold the table, then insert your table. The table will not
only fit properly against the top of a column, but should also look
better when it follows text in a column.
NOTE: Anywhere I've used 2.0 or -2.0, you can use any number you want,
just be sure to get the signs right and use the same number in all three
places. Some people use 12.0 pt and -12.0 pt, for example.

How to avoid displaying empty rows in a table?

The situation is as follows:
I have got a set of questions under a particular category say marketing category.
The user will be displayed with a table consisting of a set of questions from a particular category with four radio buttons for each question.
Now once he is done with all the set of questions under a particular category, he will be navigated to the next set of questions under some other category say 'xyz'
Now instead of creating seperate view objects for each category, we have created a view object which will hold all the set of questions from all the category but will display only the set of questions under a particular category by declaring a variable in the backing bean and setting the question rendering to the value in the variable. the value to the variable will be changed once the user is done with answering all the set of questions under a particular category.
Now the problem that i am facing is:
Because of the rendering condition that i have used, it displays only those rows that have the rendering condition set to the variable in the backing and displays all other empty rows overlapped.
How do i avoid this situation ??

Seems odd, but you could use COALESCE to achieve this.
ME_XE?create table all_nullz (col1 number, col2 number, col3 number);
Table created.
Elapsed: 00:00:00.20
ME_XE?
ME_XE?insert into all_nullz values (1,2,3);
1 row created.
Elapsed: 00:00:00.12
ME_XE?insert into all_nullz values (null, null, null);
1 row created.
Elapsed: 00:00:00.06
ME_XE?
ME_XE?delete from all_nullz where coalesce(col1,col2,col3) is null;
1 row deleted.
Elapsed: 00:00:00.26
ME_XE?

Row selection in Table should be the same, if we came back to the page?

Hello All,
I am using JDeveloper 11g.
I created one adf Table on jsp(empPage) page and selected one row(single selection) , than user can move to other page(to finish some other task), after coming back to the earlier page(empPage), row selection should be the same.
Can you please help me?
--Neelmani Jaiswal
Edited by: Neelmani Jaiswal on Jan 11, 2009 12:09 PM
Edited by: Neelmani Jaiswal on Jan 11, 2009 12:10 PM

check this post here. I still have the same issue.
Code for getting the selected row in ADF Table 11G prod

Empty rows in advanced table

Hi there,
In my advanced table with multiple selection check box, I have the logic to insert 10 rows into the view object before the table is rendered. So my table display 10 new blank rows.
Assume user only enter 3 rows and I don't want to save those 7 empty rows. How can I recognize the 7 empty rows and remove them from the VO?
Please advise.
thanks,
Charles

Hi Charles,
You may be dispalying some columns on OAF page, check all thos for null, if every field is Null then it is unused and you can remove it.
This is sample code:
public void deleteUnusedLines()
XXEGASRLinesVOImpl pervo = getXXEGASRLinesVO1();
if(pervo==null)
Row row[] = pervo.getAllRowsInRange();
System.out.println("No of items "+row.length);
for (int i=0;i<row.length;i++)
XXEGASRLinesVORowImpl rowi = (XXEGASRLinesVORowImpl)row;
if((rowi.getItemDescription()==null)||("".equals(rowi.getItemDescription().trim())))//add more conditions here to locate empty rows.
rowi.remove();
Regards,
Reetesh Sharma

Empty Row in Advanced Table

Hi,
I have an Advanced Table "DelegatedRN" in which the where clause is set pragmatically in the processRequest by
OAAdvancedTableBean table =
*(OAAdvancedTableBean)webBean.findChildRecursive("DelegatedRN");*
table.queryData(pageContext, false);
, and it is fetching the correct records, but it is adding an empty record where ever the page in rendered.
Please advise how i can remove the empty record from the table.
Thanks in advance to all.
Regards...Ashraf

Hi Ashraf,
Do a sanity check to see if a new row is being created(in Process Request) for the vo attached to the table.
Thanks

New rows in Adobe table are not added to WD Context

Hi experts: we have several Adobe Interactive forms. Each has a table. the user can add rows to the table, but when they do, the WD ABAP context does not get additional rows added to it. The new rows appear on the form, but not in the context. If users change values in existing table rows, those values are changed in the context; however, new rows do not show up in context.
Our Hierarchy Layout:
P1
--TableSub
InnerSub
Table1
Row1
<table fields>
Remove (button)
Add (button)
The JavaScript for the buttons: ADD button...
P1.TableSub.InnerSub.Add::click - (JavaScript, client)
this.parent.instanceManager.addInstance(); // this adds a row, context not changed...
xfa.form.recalculate();
Remove button:
P1.TableSub.InnerSub.Remove::click - (JavaScript, client)
P1.TableSub.InnerSub.instanceManager.removeInstance(this.parent.index); // this keeps same # of context rows, but "removed
// rows" have data replaced by duplicate data of another row; can deal with this issue...
xfa.form.recalculate();
The WD Context node has Cardinality 0..n Selection: 0..n (have tried 0..1, too). No difference in context with additional form rows.
Anybody, any ideas as to why # of rows in WD Context is not being altered by the Interactive Form? Thanks!
Edited by: Jack Hofmann on Aug 2, 2010 11:25 PM

Hello,
This question is asked many times in this forum.
These links might help you:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/802f0ed1-a17a-2c10-7db4-d515a5b047ed
Re: Table control in Adobe forms
Adobe form from webdynpro : Getting a single row in the table
Thanks & Regards,
Omkar Mirvankar.

How to make a empty row in a table in itext

Table table = new Table(4,2);
table.setWidth(100);
table.setBorder(1);
Cell cell = new Cell("1");
table.addCell(cell);
table.addCell("2");
table.addCell("3");
table.addCell("4");
table.addCell("");
table.addCell("");
table.addCell("");
table.addCell("");
document.add(table);
in this 1st row will be created bt not the second one.can u plz tell me any solution.i will b thank ful to you.

.can u plz tell me any solution.i will b thank ful to you.http://www.catb.org/~esr/faqs/smart-questions.html#writewell
How To Ask Questions The Smart Way
Eric Steven Raymond
Rick Moen
Write in clear, grammatical, correctly-spelled language
We've found by experience that people who are careless and sloppy writers are usually also careless and sloppy at thinking and coding (often enough to bet on, anyway). Answering questions for careless and sloppy thinkers is not rewarding; we'd rather spend our time elsewhere.
So expressing your question clearly and well is important. If you can't be bothered to do that, we can't be bothered to pay attention. Spend the extra effort to polish your language. It doesn't have to be stiff or formal in fact, hacker culture values informal, slangy and humorous language used with precision. But it has to be precise; there has to be some indication that you're thinking and paying attention.
Spell, punctuate, and capitalize correctly. Don't confuse "its" with "it's", "loose" with "lose", or "discrete" with "discreet". Don't TYPE IN ALL CAPS; this is read as shouting and considered rude. (All-smalls is only slightly less annoying, as it's difficult to read. Alan Cox can get away with it, but you can't.)
More generally, if you write like a semi-literate b o o b you will very likely be ignored. So don't use instant-messaging shortcuts. **Spelling "you" as "u" makes you look like a semi-literate b o o b to save two entire keystrokes.**

Delete first empty row in a table

Hi,
Can you please provide the script for the below requirement.
Need to delete First empty row in all the tables. (Tables having more number of empty rows. i need to delete first empty row only)
Regards,
Velu

@Velu – the following blog post by Jongware might get you started:
Tackling Tables through Scripting
by: Jongware | April 8, 2013
http://indesignsecrets.com/tackling-tables-through-scripting.php
Document Object (DOM) documentation:
Indesign JavaScript Help
InDesign ExtendScript API (10.0)
Table Row specifics:
Adobe InDesign CS6 (8.0) Object Model JS: Row
InDesign ExtendScript API (10.0)
Uwe

Table entries not getting displayed in desired format

Hi All,
In my adobe layout I created a table . I used data format Align Right and align middle for the table entries. In the Output some entries of the table are not displaying in align right and align middle.
Output:In the below output the first row data is not in desired format .
Thanks in Advance,
Suneel.Uggina.

That is pretty to much information to help you.
You need to share your technical setting. How did you create the table? Subforms, Table-assistent... what are the values in? Format, what happens when you also pass more than 1 digit to the numbers in the first row, does it show up correct?
So please share more details and explain exact what you have tried to fix the issue. The community is able to help you, but not meant to suggest enaything you could have done.
~Florian

Get Multiple Rows into internal Table using Webdynpro Alv Display ..

Hi guys ,
I need to find out the logic for getting all the selected rows into the internal table.
When i display the ALV Output on webdypro screen .
USer Selects multiple rows for further processing ..
Ineed to get all the rows selected by user into an internal table .
Please let me know how to achive this ...
Thanks in advance for quick reply
Regards
Saurabh Goel

Hi,
You need to use the method GET_SELECTED of IF_WD_CONTEXT_NODE to get the rows selected. Also ccheck for the paramters of that method, this retruns the element set.
This meets your requirement.
Regards,
Lekha.

Empty rows in a table should not be displayed

Similar Messages

Maybe you are looking for