Empty space in JScrollPane

Hi,
I have placed a JScrollPane with verticalScrollBar property set to AS_NEEDED. I have a JPane inside the JScrollPane with layOut property set to null.
When the form is not maximized, first half of the JPane is displayed and Vertical scrollbar is displayed. If I scroll down, after all controls, there is a huge empty space in the JPane, which is actually not there at design time. This happens even in the form maximized mode also.
Please help.

What I have noticed is, even if the VerticalScrollBarPolicy is set to AS_NEEDED, it is displaying the vertical scroll bar always! How to avoid that?

Similar Messages

Delete empty space in PLD footer

Hello,
In my report done with PLD I have the following need:
For example the footer contains 3 fields :
If the 3 fields contains data, it's displayed like this:
Total A
Total B
Total C
If the field Total B doesn't contain any data, it's displayed like this:
Total A
Total C
My objective is to avoid the empty space between the 2 fields Total A and Total C when the field Total B is empty.
I already tried to tick "delete null values" and "adjust to the cell hight" but the space is still here!
I already tried the solutions given in the other threads but it doesn't work (maybe because in the threads they talk about repetitive area, which is not my case: i work with the footer).
Thanks for your help.
Kind regards,
Walid BELAHMER.
Edited by: Walid Belhamer on Apr 30, 2010 5:56 PM
Edited by: Walid Belhamer on Apr 30, 2010 5:57 PM

Hi,
I am sure that the above solution is not possible instead of printing in vertical line you can print the details in horizontal line like this
TOTAL A: Some infor..... TOTAL B: Some information Total C Some information
This is the solution that i have gave to the clients....
Regards
Chidambaram

Empty spaces

Hi everyone!
I need to ensure some columns have null and not empty spaces.
I have come up with this method.
Would like to know if there is any other way of doing it.
update table_temp
set columnSample = null
where (ascii(columnSample)= 0 and length(columnSample) > 0)
or (ascii(columnSample)= 32 and length(columnSample) > 0)
or (ascii(columnSample)= 10 and length(columnSample) > 0)
or (columnSample= '' and length(columnSample) > 0)Hope someone could enlighten me on this!
Thanks a lot.
Nith

Nith,
Your statement would NULLify columns that start with empty space, but have other characters after that.Column like " helllo".
This simple statement sould do the trick:
update table_temp
set columnSample = null
where ltrim(columnSample) is NULL

I have 2 inches of empty space on both sides of the screen on all websites when using firefox. How do I get webpages to fill the screen?

All my webpages on firefox have about 2 inches of empty space on both sides of the screen, but on Internet Explorer there is much less empty space or mostly none at all. How do i fix this?

I can't make out from your low-res screenshot what those gray images in the menu at the left are, but I do not see them and there is nothing int the page source that accounts for them.
*http://www.womensonlinebusiness.com/about-WomensOnlineBusiness.html
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

How can we remove empty space created in the flat file unintentionally

Hi Forums,
In our data flow, transactional data is flowing from one ODS(Acquisition Layer) to two different ODS's(Integration Layer) parallely. Error occured in first ODS(Acquisition Layer) i.e ODS was not getting activated for long time coz of empty space[#] in one of the infoobjects of a particular record. After manually deleting the request in two ODS's of Integration Layer & edited that particular record in PSA and reconstructed that deleted request form PSA the problem was solved.
This wrong entry is getting visible only at the time of ODS activation. Can any one suggest me a permanent solution for not occuring of empty space at the source system level or at SAP XI interface level or in the SAP BW system level?
Thanks in advance

Hi,
If your ino object is of numeric type then check the condition if it is # (empty) then
replace with 0 (zero), if it is char. then make it SPACE..you can use this following statement in your transfer / update rule for the IO.
replace all occurances of '#' with ' '. (for Char.)
(for Numeric)
if COMM_STRUCTURE-XXXX is initial.
RESULT = 0.
endif.
Hope it helps..
assign points if useful.
Cheers,
Pattan.

Videos (eg, YouTube, New York Times) do not work on my Retina Display MacBook Pro. There is sound but only empty space where the video should be. Help?

Videos (eg, YouTube, New York Times) do not work on my Retina Display MacBook Pro. There is sound but only empty space where the video should be. Help?

Did you install Flash Player?
http://get.adobe.com/flashplayer/

How to add new text and an empty space before a file name with Automator

I can create a new service to add to multiple files some text before the file name but I need to add even an empty space; e.g. file name original becomes: new text(space)file name original. The aim is to add this text and space to multiple files.
I hope to be understood. Please can somebody help me?
Thanks

This is an old Apple-supplied AppleScript that will do the job.
IMPORTANT: note the conditions of use: it will choose the frontmost Finder window to operate on. Therefore, open the folder you want to change the names of and make it the front finder window BEFORE running the script.
Add to File Names
This script is designed to add a prefix or suffix to files in the front window of the desktop.
If no folder windows are open, the script will affect items on the desktop.
Copyright © 2001–2007 Apple Inc.
You may incorporate this Apple sample code into your program(s) without
restriction. This Apple sample code has been provided "AS IS" and the
responsibility for its operation is yours. You are not permitted to
redistribute this Apple sample code as "Apple sample code" after having
made changes. If you're going to redistribute the code, we require
that you make it clear that the code was descended from Apple sample
code, but that you've made changes.
--March 2014: Changes by Phil Stokes to make the script work on 10.9
--these changes are simply reversing the order of parameters in the lines that have "copy" in them
-- The following line is disabled due to a Menu Manager bug
--set the source_folder to (choose folder with prompt "Pick the folder containing the files to rename:")
try
          tell application "Finder" to set the source_folder to (folder of the front window) as alias
on error -- no open folder windows
          set the source_folder to path to desktop folder as alias
end try
set the prefix_or_suffix to ""
repeat
          display dialog "Enter the prefix or suffix to use:" default answer the prefix_or_suffix buttons {"Cancel", "Prefix", "Suffix"}
          copy the result as list to {button_pressed, prefix_or_suffix}
          if the prefix_or_suffix is not "" then exit repeat
end repeat
set the item_list to list folder source_folder without invisibles
set source_folder to source_folder as string
repeat with i from 1 to number of items in the item_list
          set this_item to item i of the item_list
          set this_item to (source_folder & this_item) as alias
          set this_info to info for this_item
          set the current_name to the name of this_info
          if folder of this_info is false and ¬
                    alias of this_info is false then
                    if the button_pressed is "Prefix" then
                              set the new_file_name to the (the prefix_or_suffix & the current_name) as string
                    else
                              set the new_file_name to the (the current_name & the prefix_or_suffix) as string
                    end if
                    my set_item_name(this_item, the new_file_name)
          end if
end repeat
beep 2
on set_item_name(this_item, new_item_name)
          tell application "Finder"
--activate
                    set the parent_container_path to (the container of this_item) as text
                    if not (exists item (the parent_container_path & new_item_name)) then
                              try
                                        set the name of this_item to new_item_name
                              on error the error_message number the error_number
                                        if the error_number is -59 then
                                                  set the error_message to "This name contains improper characters, such as a colon (:)."
                                        else --the suggested name is too long
                                                  set the error_message to error_message -- "The name is more than 31 characters long."
                                        end if
--beep
                                        tell me to display dialog the error_message default answer new_item_name buttons {"Cancel", "Skip", "OK"} default button 3
                                        copy the result as list to {button_pressed, new_item_name}
                                        if the button_pressed is "Skip" then return 0
                                        my set_item_name(this_item, new_item_name)
                              end try
                    else --the name already exists
--beep
                              tell me to display dialog "This name is already taken, please rename." default answer new_item_name buttons {"Cancel", "Skip", "OK"} default button 3
                              copy the result as list to {button_pressed, new_item_name}
                              if the button_pressed is "Skip" then return 0
                              my set_item_name(this_item, new_item_name)
                    end if
          end tell
end set_item_name

How to get rid of empty space in module pool screen?

Hello Experts,
In module pool, I have 2 table controls inside 2 separate boxes in the same screen. Based on some conditions I hide the first table control. It's all working fine. But the space where first table is created remains blank in the screen. I don't want that.If the first table control is hidden the second table control should occupy the empty space. I do not want empty space in the screen.
How can I acheive this.Is there anything I can set in the screen attribute level.
Thanks.
Yasin.

Hi Yasin,
As you said you have 2 sub screen areas and also 2 subscreens.
when hide the First subscreen from First Subscreen area, you need to assign the second subscreen on to the first subscreen area and a dummy subscreen on to second subscreen area, this is a kind of work around and bit tricky playing with screen elements
in Top Include
data dynnr type sy-dynnr value '100' " your default Subscreen number
in PBO
call subscreen sub1 including sy-repid dynnr1 " First Sub screen area
call subscreen sub2 including sy-repid dynnr2 " Second sub screen area
in PAI
module call_dyn_number.
in program.
case ok_code.
when 'HIDE'. " When you hide the first table control
dynnr1 = '200' " This is your second table control containing Screen number
dynnr2 = '300'. "This is a Dummy Screen Number which doesnt contain any screen elements so output is plain
" Note: This is a crude IDEA only as you try to implement you need to adjust this for the expected outcome
" I implemented this earlier but dont have complete ref at this moment
endcase.
Hope this serves your purpose
Cheerz
Ram

Since installing Firefox as my default browser, and removing Internet Explorer 9,which was awful, my Homepage screen is just in the middle of my screen with very small print and empty space on each side of it. Can the be fixed?

Three days ago I installed Internet Explorer 9 as my browser. When I tried to sign in to my email on my homepage I couldn't.
I contacted my service provider and they said that Explorer 9 was not compatible with them as it is in Beta form and also in test mode.
They suggested that I remove Explorer 9 and install Firefox, which I did. Then they said it was a good idea to have more than one browser at a time and to go into the Microsoft site and download Explorer 8.
I tried this and it would not let me go back to Explorer 8 only forward to 9 which I reinstalled.
After all of this my Homepage only fills up the middle of my screen and I have empty space on either side of the picture. When I browse, the site I go to opens up to full page, but the print is much smaller than before.
I don't know what I installed to make my viewing so much smaller or my homepage to shrink.
Also do I really need 2 browsers or can I just go with Firefox?
If so, how will not having Internet Explorer affect my browsing?
Firefox is set as my default browser and I am enjoying using it, I just wish I had my Homepage back to full screen!

When going to a website the picture was small - tried changing the Zoom size , tried Zoom Reset - the text did change size but the layout distorts - found under View - Zoom - Zoom Text Only was checked --- Removed this check mark and the website returned to normal size and Zoom worked normally again. I am 99.9999% sure I did NOT check this myself and there is no one else on the computer to cause it. Maybe this will help.

How to delete photos in a folder without causing unintended empty space?

So I like to keep photos in a typical Finder folder. The thing is, whenever I delete a photo, there's an empty space where that photo used to be. And those empty spaces add up and the result is not too visually appealing. Is there any way to remove all the empty spaces at once? Thanks in advance.

Try setting a default Sort By setting using COMMAND-J while viewing the window. You can configure other settings as well:

Empty space while in full screen mode

Hi there, today after the installation of OSX Maverick, i've started to experience some problems with the new dock bar. When i try to use VLC in full screen mode, i see an empty space on the top of the screen, and the dock bar on the top does not wants to hide away of the monitor. I printed a screenshot of my monitor that you can see down there, and i'd like to know if there's someone else with my same issues, or if it's me, and i just need to set up my MacBook Pro, to solve that.
On the top of the picture you can see that there's still an empty space, where i can still see my background image.http://imageshack.us/f/196/go1p.png/
Thanks for your help and sorry for my bad english. Cheers.

I have the same problem at times. I exit full screen and then enter back into full screen. Does that work for you?

How do I get rid of empty space left at the end of my project?

My first posting here - I'm glad to find this community!
I've been working on a project . . . editing it down from its original length, but the empty space still exists at the end of my timeline. I want to remove it, since I'm posting the project online, but I can't figure out how to eliminate it.
Please help! Thank you!
Sara

welcome Sara to the  boards...
sometimes, we recognize 'stray clips' at the very end.. that is clip is often just a single frame of video...
a) enlarge the timeline view to max. ... anything in sight?
b) switch to 'slide view' mode.. sometimes, such a stray-clip is shown as a 'blank black' clip...

? How do I delete large blocks of empty space with Adobe Acrobat Pro?

How do I delete large blocks of empty space with Adobe Acrobat Pro?

How can you delete "empty space"? If you mean that you want to delete lines,
like in Word, so that the text afterwards will go "up the page", then you're
out of luck. You should do that in the original file, and then re-create the
PDF.

How to collapse empty space above each photo in an album?

Hi folks.
I have a photo album setup to display my photos as a single column with no caption.
I'm seeing an alarming amount of 'dead space' above each photo. I.e., when I click on the photo in iWeb in order to see the blue bounding box that contains the photo, there's a lot of empty space.
Some of my photos are portrait orientation and so the gap is only about 1/3 of the height of the photo. But for some of my landscape-oriented ones, the gap can be as much as twice the height of the photo.
Is there any way to force iWeb to adjust the container to the height of each image plus some padding?
Thanks
Tony

The only user controlled spacing is that offered by the Photo Grid pane and that doesn't really affect that spacing much. Other options would be to go the flash route with one of the applications or iPhoto plugins available. Examples of some of them can be see in these demo pages:
PhotoPresenter Animated Slideshow Themes
SimpleViewer and Flash Album Exporter
Flash Album Exporter Postcard and AutoViewer Slideshow Themes
Jalbum
Cyclosaurus as offerred at times in the past javascript code to modify slideshow attributes but none for the spacing as you want.
OT

How to remove empty space from a file

Hi all,
Can any one help on how to remove the blank spaces from a file.
I used trim function but unable to remove the spaces.
I have a file in which there is a name like 'JAIRAM' and am storing this file in a variable FILE_CONTENTS.
Now am unable to compare FILE_CONTENTS with another value as it is storing empty spaces also from the file.
Please help on this
Thanks,
Srini

Trim only trim at the beginning or at the end. Can you try using the replace sql function.. see below..
SQL> select replace('abc def',' ','') from dual ;
REPLAC
abcdef
cheers

Empty space in JScrollPane

Similar Messages

Maybe you are looking for