Enable auto update while deploying Reader 11 via group policy

I would like to push the latest adobe reader 11 out via group policy. I have tried using the adobe customization wizard but I am unable to set the installs to auto update. They default to download the update and prompt the user. I do'nt want the user to be prompted at all. I just want it to automatically update. Is there an easy way to deploy this?
I would like it to be like flash. You can deploy the mms.cfg file and it configured flash to auto update.
Thanks,
Justin

Similar Messages

Deploying Reader through Group Policy

Hi,
I have applied for and been granted a deployment license, and am trying to follow the instructions to deploy reader through group policy to computers on my network.
The document adobe gives you says to put the computer name under security filtering in the OU GP that was created. I have done this but it's clear the policy isn't getting applied.
When I run group policy result, it's not even showing so I must have something wrong. The document that adobe gives has several of the pictures out of place and is covering some text (at least when I display it - and yes I am using most current version of reader).
Any ideas?
Thanks,
Allen

Unless I'm misunderstanding your last reply, the GPO is working as intended, when you change it back.
GPO = Applied to one specific OU
Security Filtering = 1 specific PC
Active Directory OU for intended GPO contains = 0 computers
The PC you're applying the security filtering to must exist in the Active Directory OU you created for the GPO.
E.G. I create a GPO called acc_sw for my Accounting dept called accounting. 3 PCs in accounting are called:
Ed_PC
Karen_PC
Thomas_PC
In the security filtering for the GPO I created, I have:
Ed_PC
Karen_PC
Thomas_PC
Now, in Active Directory Users & Computers, in the accounting OU I have 0 computers.
The end result is no acc_sw being processed for:
Ed_PC
Karen_PC
Thomas_PC
They must exist in the target OU, or a suboordinate OU of the target OU, for the GPO to work.

How do I distribute latest update (7.0.1) via Group Policy?

Our company is just now getting into Acrobat Reader/Standard/Professional version 7. Is there an easy way to upgrade them at the same time they are installed via Active Directory Group Policy?
I have the ".msi" for the update, but I can't make the package install after the software installs. It always tries to install first or at the same time.
Better yet - is there a way to patch the source files? Then I can just have the computers reinstall from the source.
Thanks!

Ok, we have the upgrade deployed and tested here and it's working fine.
If anyone else has this problem the procedure is:
- Download the 7.0.1 upgrade .exe file.
- Launch the program, but do not click anything on the
installation screen.
- Browse to:
C:\Program Files\Adobe\{0C55731F-7B21-4936-839A-BA09B2EAED59}
- Copy the MSI file in this folder to the shared folder you use
for deploying software.
- Create a new group policy object and add the upgrade MSI
(I don't believe you can reliably set the installation order
from within a single group policy object).
- Ensure the upgrade appears HIGHER in the group policy list than
acrobat 7 (ie with a lower link order value), to ensure that the
upgrade installs after acrobat.
Ross

Deploying Contribute via Group Policy

I've been trying to deploy contribute via MS Win 2003 Group
Policy, but have had no luck. Has anyone been able to successfully
push out the software, if so, did you utilize the Software Install
or did you use a script? How did you deal with the input of the
Contribute serial number? Optimally, we'd like to generate a silent
install, but again, have had very little luck and there is very
little information available.
Any help is appreciated.

Someone in another post pointed me to this document.
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=a4175402
The only downside is that you need to set a batch to copy your
ContributeConfiguration items to the install folder. I think Adobe
could do a better job on the deployment side.

Deploying msi via group policy without administrative rights

We are having a problem with flash player not working without
Administrative right on the machine. We thought we could get around
this by using the flash_player_active_x.msi and installing through
group policy. The install during a computer reboot (if assigning to
a computer) or during a user sign on (if assigned to a user) seems
to work fine.
However, when you actually try to load a webpage with flash,
nothing. The component doesn't actually get installed into the
browser. As soon as you log on with a privilaged account, and
browse to a flash enabled page, the install finishes, the active x
control is loaded and now all users can see it.
However, I'd really prefer not to have to go around to each
computer and log on with the administrator account - kind of
defeats the purpose of group policy.
All computers are Win XP sp2 with IE 7. The active directory
server is a Win2k server.
Any thoughts would be appreciated.

I am having this issue also. Has anyone found a solution?
I found this reference on this website, but there is no
solution given:
I
have installed Adobe Flash Player but still don't see any Flash
content. What is wrong?
quote:
Restricted User accounts are unable to display Flash Player
content
After successful installation under the Windows Administrator
account, Restricted User accounts are unable to display Flash
Player content. This issue has been reported on Microsoft Windows
XP Service Pack 2 systems and occurs sporadically. It may also
affect other versions of Windows, such as Windows 2000.
If you installed Flash Player 8.0.24.0 prior to April 6,
2006, then you must remove it using the Flash Player uninstaller
released on May 11, 2006. Remove Flash Player using the
instructions in How to uninstall the Adobe Flash Player (TechNote
14157).

Deploying Bookmarks via Group Policy

Hi,
I've been tasked with deploying Firefox bookmarks via GPO. The GPO add-on is installed.
Initially things are fine as I can deploy our centrally created places.sqlite file to the relevant Firefox directory.
However, if the user creates new bookmarks these are overwritten when our central places.sqlite file is redeployed. We have to update the file frequently as new favourites are added.
Is there any way of us being able to update each users places.sqlite without them losing their personally created bookmarks?
Cheers.

Try https://mike.kaply.com/2012/03/26/customizing-firefox-distribution-ini/

Updating Existing Install and adding extensions via Group Policy

We have recently installed StarOffice 8 due a full planned move away from Microsoft Office 2003, we have deployed the CD install via group policy to test the functionality of StarOffice in a school environment. Due to a problem cropping images in Writer (cropooo 0.2.1 extension needed) we are having to update to the latest patch ver10 (300+pc's). Is there a way to automate this via GPO? We only have the standard version of staroffice 8 and not the enterprise CD so we can not make a custom transform file. Also can extensions be deployed via Group Policy? We are runnning a Windows 2k3 server with XP clients.

Network Deployment of Adobe Flash Player
I found this link http://www.adobe.com/devnet/flashplayer/articles/flash_player_admin_guide.html
It is a good idea to extract the msi the deployment data point using msiexec /a {filename} (this creates an administrative installer)
Use the extracted MSI to deploy flash. (either assigned or published)
Please make sure that the user can read from the data point you place the files.

Automatic Windows Update via Group Policy in Windows 8

Hi,
I have created a new GPO to place some settings on the Automatic Update to all my client pcs. The settings applied as the image i uploaded below. The problem is that this GPO were successfully applied to all my Windows 7 machine but not Windows 8.1 machines.
Is there anything that i missed or i should know about Windows 8.1 automatic update configuration via Group Policy?. I've tried to google but cant find any guidance that relates. I'm not using WSUS. Appreciates any advise. Thanks.
Cheers, Sparcx [MCTS,MCITP-EA]

Hi Leon, yes i have read the blog that you gave, It says that Windows 8 requires a KB update to roll the changes that will solve this issue. However its also said that the update is included in Windows 8.1 and there's no need to update to solve the Automatic
Update behaviour via Group Policy as mentioned. Also tried to apply the KB update suggested, but failed. It is not for Windows 8.1 platform. Is there any other suggestion? I kinda stuck here..
Cheers, Sparcx [MCTS,MCITP-EA]

Is there a way to deploy Adobe Air package via Group Policy or SCCM?

Is there a way to deploy Adobe Air package via Group Policy or SCCM?

hi,
I guess you can try the following options
Remove the all the entry from the TOC of your project or create a new blank TOC and select that while AIR file generation
Remove the all the entry from the index of your project or create a new blank index and select that while AIR file generation
Remove the all the entry from the glossary of your project or create a new blank glossary file and select that while AIR file generation
THis will ensure that TOC/Index/Glossary page is not shown,
There is no way to hide Favorite or RSS from the AIR Help. Again, you can try looking at the Unipane Template provided in the AIR SSL Dialog.
Hope this helps
-Praful Jain

Disabling windows update via group policy

hi,
i would like to disable automatic windows upate via group policy on windows server 2008. is it possible?
thanks.
sundeep

hi,
disabling the automatic update is not a recommended practice, but here are the steps,
Click Start, and then click
Run.
Type gpedit.msc, and then click
OK.
Expand Computer Configuration.
Right-click Administrative Templates, and then click
Add/Remove Templates.
Click Add, click
Wuau.admin the Windows\Inf folder, and then click Open.
Click Close.
Under Computer Configuration, expand
Administrative Templates, expand Windows Components, and then expand Windows Update.
The Configure Automatic Updatespolicy appears. This policy specifies whether the computer receives security updates and other important downloads through the Windows Automatic Updates feature. The settings for this policy let you specify if
automatic updates are enabled on the computer. If the service is enabled, you must select one of the three configuration options.
To view the policy settings, double-click the
Configure Automatic Updatespolicy.
To turn on Automatic Updates, click
Enabled or to turn off select
Disabled
hope this helps
thanks

Can Adobe Air 3.1 be deployed via Group Policy?

I am looking for a definitive answer as to whether or not Adobe Air 3.1 can be deployed via Group Policy? I've found material on the web that is very contradictory. Can it be done and if so how? I can't find any solid instructions on how to deploy this application and need to have it installed on about 60 desktops.
We are trying to deploy the Salesforce.com Desktop Chatter application. Any helpful info is greatly appreciated.
Thanks!

Hi Kevin,
I replied via email yesterday, but in case anyone else is following along here's what I said:
For GPO deployment, we don't officially "support" it (ie. we don't test for it internally), however I did run across this recent post where an admin had success.
http://www.appdeploy.com/packages/detail.asp?id=2339
Hope this helps,
Chris

How to Enable Auto Update functionality in adobe AIR application?

Hi All,
     How to Enable Auto Update functionality in adobe AIR application and ask for new version to install to user.
     Please provide some informarion regarding above topic.
Thanks,
Sunil Rana

Hi All,,
Got solution. call checkUpdate() function in application level initialize event.
private function checkUpdate() : void
                appUpdater.updateURL = "http://www.aa.com/flex/aa/NativeUpdater.xml";
                appUpdater.addEventListener(UpdateEvent.INITIALIZED, updater_initializedHandler);
                //we can hide the dialog asking for permission for checking for a new update;
                //if you want to see it just leave the default value (or set true).
                appUpdater.isCheckForUpdateVisible = false;
                //we initialize the updater
                appUpdater.initialize();
             * Handler function for updater_initializedHandler events triggered by the ApplicationUpdater.INITIALIZED
             * @param updater_initializedHandler
            protected function updater_initializedHandler(event:UpdateEvent):void
                //initializeHandler();
                appUpdater.checkNow();
In NativeUpdater.xml
<?xml version="1.0" encoding="utf-8" ?>
<update xmlns="http://ns.adobe.com/air/framework/update/description/1.0">
     <version>2.0</version>
      <url>http://www.aa.com/flex/aa/AutoUpdate.air</url>
     <description>
     <![CDATA[                 * This a Win update
      ]]>
      </description>
</update>
Upload NativeUpdater.xml file on your Server. When you open your old .air file it will ask for replace with new version.
Thanks,
Sunil Rana

How to deploy a file on all users C drive via group policy

I'm trying to deploy a file on all users C drive via group policy but its not working. logon script is already kept in place but nothing is happening. If I run the same command from my pc it's working fine. Does any one have good script to copy & deploy
the file. Pls help

Hi,
You can use Group Policy Preferences to deploy this and Item-level-Targetting to filter by OUs/groups, wmi filters ,etc.
Computer Configuration / User Configuration - Preferences - Windows Settings - Files
More on this here.
http://technet.microsoft.com/en-us/library/cc772536.aspx
Hope this helps.
Regards,
Calin

How do we track client deployment via group policy by referring log files globally

How do we track client deployment via group policy by referring log file centrally?

need answer from both CM07/CM012 by using GPO
There is NO Centralized tracking for GPOs.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

How to control IE10's "Compatibility View settings" via Group Policy

First
of all thanks for taking the time to read this. I must let you know that I have limited experience with Group Policy so here it goes...
Domain Controllers are 2008 R2 Datacenter and client computers are Win7 Pro with IE10
I need to add several sites to the "Compatibility View settings" in IE10 and have these pushed out via Group Policy.
I followed this to enable the "Use Policy List of Internet Explorer 7 sites:"
Use
Policy List of Internet Explorer 7 sites
I even added the settings to both User Configuration as well as Computer Configuration. However the computers on the domain wouldn't show these sites in
IE even after forcing a GP update (gpupdate /force)
Yes I did use top level domain names.
Next I installed the Administrative Templates for Windows Internet Explorer 10 on the DC:
Administrative Templates for Windows Internet Explorer 10
this gave me an Inetres.adm file while I put in the same location as my other .adm files that Group Policy Manager sees (located at C:\Windows\SYSVOL\domain\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\Adm)
I do see a bunch of .ADMX files located at C:\Windows\PolicyDefinitions
on the DC. I also see a lot of .ADML files located at C:\Windows\PolicyDefinitions\en-US.
Where is my Central Store located that my Group Policy references? How do I know what location GP is reading from?
Now I installed the Administrative Templates (ADMX) for Windows Server 2008 R2 and Windows 7 from here:
Administrative Templates (ADMX) for Windows Server 2008 R2 and
Windows 7
This gave me a "Win7-2008R2-admx.msi" package that I installed. I took the defaults and extracted contents to:
C:\Windows\PolicyDefinitions\Server 2008 Win7\PolicyDefinitions
Are all of these .ADMX files supposed to be placed into my Central Store?
If I mouse-over "Administrative Templates" in Group Policy Manager is says that the policy definitions are retrieved from the local machine.
I then right-clicked on top of "Administrative
Templates" in Group Policy Manager and highlighted Inetres and selected Delete.
While in Add/Remove Templates I click on Add and it defaults to looking for "Policy Templates" and will not let me select and .ADM/.ADML/.ADMX files.
What am I doing wrong here?
How do I know that I'm using the most recent Inetres file?
How do I know which file Group Policy Manager is using to manage the IE settings that are in:
User Configuration->Administrative Templates->Windows Components->Internet Explorer->Compatibility View->Use Policy List of Internet
Explorer 7 sites
or
Computer Configuration->Administrative Templates->Windows Components->Internet Explorer->Compatibility View->Use Policy List of
Internet Explorer 7 sites.
Is there anything else you can suggest?
Many, many thanks in advance for any response

Hi,
Regarding your question, usually we create a Central Store for Administrative Templates (Both .admx and .adml files), and create a folder that is named PolicyDefinitions in the following location:
\\FQDN\SYSVOL\FQDN\policies. The .adml files on the Windows computer
are stored in a language-specific folder. For example, English (United States) .adml files are stored in a folder that is named "en-US." When you have copied all .admx and .adml files, the PolicyDefinitions folder on the domain controller should contain the
.admx files and one or more folders that contain language-specific .adml files.
Please refer to the following articles. You will get more helpful details about the Central Store for Group Policy Administrative Template files.
How to create the Central Store for Group Policy Administrative Template files in Windows Vista
http://support.microsoft.com/kb/929841
Windows 7, Windows Server 2008 R2 and the Group Policy Central Store
http://blogs.technet.com/b/askds/archive/2009/12/09/windows-7-windows-server-2008-r2-and-the-group-policy-central-store.aspx
Based on your description, I understand you enable the setting “Use Policy List of Internet Explorer 7 sites”. However, didn’t show any sites in IE in client even after forcing a GP update
(gpupdate /force). Please use command “gpresult” in clients to collect the GPOs, and then check whether the GPO contain the setting “Use Policy List of Internet Explorer 7 sites” was applied to clients or wasn’t.
In addition, you also can change the related setting by using registry directly.
Follow the path of the registry:
HKEY_CURRENT_USER->Software->Policies->Microsoft->Internet Explorer->BrowserEmulation->PolicyList. (Create registry folders
manually if not present)
Right Click
PolicyList ->New->String Value->Enter the name of the website. (Both under ‘Name’ and ‘Data’. For example,
Value name: example.com Value data: example.com)
There is a similar question, please read as a reference.
Add manually URL on Compatibility View List in IE10
http://social.msdn.microsoft.com/Forums/ie/en-US/5a15e861-d106-471e-a968-fdea15e31c45/add-manually-url-on-compatibility-view-list-in-ie10
Hope this helps.
Best regards,
Justin Gu

Enable auto update while deploying Reader 11 via group policy

Similar Messages

Maybe you are looking for