Enabled from boolean.vi for GUIs

Hi George, all,
George Gatling wrote (in part):
>The latency between pressing the sweep button and seeing data
>on the screen is here to stay. What techniques do you expert
>GUIers use to discourage repeat clicks on the sweep button?
>I have had my own ideas such as disable and greying the button...
>using a modal "Please Wait" dialog... I am curious what would
>be considered an elegant or at least widely accepted way
>to handle this sort of delay. ... the delay is 1-2 sec -5 min
I don't know that there is a "standard" way, a lot depends on personal and
corporate style, but I find a combination of disabled & grey with some type
of movement to indicate that a process is on going gives the operator
assurance that the application isn'
t hung while preventing them from
pressing that button (or twiddling that control) again.
For motion I often borrow the spin indicator off the Library Manager under
the LabVIEW tools menu. If you open the Librarian, then hit ctrl-. (Windoze,
YMMV) the VI aborts and you can pillage the parts village at will. If you
click-drag the area between the two upper menus you will get an outline of
an ?mpty" box, which is a picture ring. Double click on that and you'll see
the code segmant that runs the ring. Its in a while loop in the bottom
section of the diagram.
As for Enabled/Disabled-Grey, I got tired of the real-estate taken up by
handling this so I coded up a simple small-icon VI to switch between Enabled
and Disabled-Grey by a boolean input (does anyone use the Disabled without
the grey a large percentage of the time?, just curious). I've attached that
here, for posterity.
Mike Ashe
[Attachment Enabled from boolean.vi, see below]
Attachments:
Enabled_from_boolean.vi ‏13 KB

you wrote:
[...](does anyone use the Disabled without the grey a large percentage of the time?, just curious).
I seldom use disable without the grey on controls. I use it mainly on numeric/string indicators to prevent to user to select the data. It is confusing when one can select(hilight) the string and there is nothing else to do with it (except Copy Ctrl-C).
LabVIEW, C'est LabVIEW

Similar Messages

Configuring access to Internal server from external source for public users ( DNS HTTP HTTPS FTP )

Hello there :)
i,ve faced a problem as the following :
i,ve internal network ( domain network ) with standlone TMG i want TMG to Allow public users to access
1- web server with load balance on port 5555
2- mail server with HTTPS for OWA
3- DNS to make public users make query to solve Domain name
4- FTP with load balance on port 5555
please anyone can help me with configuring this n make external users access the following mentioned above

Hi,
You could get start from the following blogs.
Microsoft Forefront TMG – Webserver Load Balancing
http://www.isaserver.org/articles-tutorials/configuration-general/Microsoft-Forefront-TMG-Webserver-Load-Balancing.html
Enabling Forms-based Authentication for External and Internal OWA 2010 Users in Exchange 2010 published using Forefront TMG 2010
http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/enabling-forms-based-authentication-external-internal-owa-2010-users-exchange-2010-published-using-forefront-tmg-2010-part2.html
TMG Firewall Name Resolution
http://www.isaserver.org/articles-tutorials/installation-planning/TMG-Firewall-Name-Resolution-Part3.html
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Jasper report on HTML when one image loaded from database and for the other

How to generate jasper report on HTML when one image loaded from database and for the other we give a image path
My code
ByteArrayOutputStream baos = new ByteArrayOutputStream();
          exporter = new JRHtmlExporter();
          exporter.setParameter(JRExporterParameter.JASPER_PRINT, print);
          exporter.setParameter(JRExporterParameter.OUTPUT_STREAM, baos);
          exporter.setParameter(JRHtmlExporterParameter.IMAGES_URI, strImageInputDirectory);
     exporter.setParameter(JRHtmlExporterParameter.IMAGES_DIR_NAME, strImageOutputPath == null ? "." : strImageOutputPath);
     exporter.setParameter(JRHtmlExporterParameter.IS_OUTPUT_IMAGES_TO_DIR, Boolean.TRUE);
     exporter.setParameter(JRHtmlExporterParameter.IS_USING_IMAGES_TO_ALIGN, Boolean.FALSE);
     exporter.setParameter(JRHtmlExporterParameter.IS_WHITE_PAGE_BACKGROUND, Boolean.FALSE);
          exporter.exportReport();
          byte[] bdata = ((ByteArrayOutputStream) baos).toByteArray();
Can any one help pls
Message was edited by:
ameet.au

hey sorry for posting it in this forum.
but do u have sample code for making it work.. since i am able to do it on PDF format(image from Database and another stored in the webserver) using
byte image[] =(byte[]) outData.get("image");
                    ByteArrayInputStream img = new ByteArrayInputStream(image);
                    hmimg.put("P_PARAMV3", img);
print = JasperFillManager.fillReport(reportFileName, hmimg, jrxmlds);
bdata= JasperExportManager.exportReportToPdf(print);

Unable to snyc calender and contacs from outlook 2011 for mac

iTunes won't sync calenders and contacts from Outlook 2011 for Mac
OS Mavericks 10.9.5
iTunes 12.0.1.26
Also tried on iTunes 11.4

I don't receive an error, i am syncing to iPhone and iPad... I connect the device to the MacBook with the cable, open iTunes and click on the device on iTunes then go to info tick sync contacts but it doesn't show me any contacts below, then tick sync calender and i could see the calenders and then I select the calender that i want to sync and press apply... the sync icon appears as if it is syncing and the disappeared after a few minutes. When i check the iPhone or the iPad the calender and contacts are empty.
I have enabled the sync services in outlook for mac 2011 and ticked calender, contacts and tasks and select the account to sync and the outlook folder to add new items to but still it does not sync anything.
I went to the iStore technical support and the technicians were unable to help me they just told me that Apple has removed the functionality, to me it looked like they were clueless

How to enable SSL optimization only for a single remote WAE and specific website?

Hi guys.
I have to enable SSL optimization for a specifc HTTPS website only and for a specific remote site only (branch office).
The scenario is as follows:
Multiple sites connected via a MPLS cloud. Each site has its own WAE device (module or appliance).
There is a central manager and core WAE in the main site (central site).
There is a website accessed via HTTPS by all the remote sites. This specific website is hosted within the main site.
For only a specific branch office (remote site) we want to enable SSL optimization for this specific website.
I saw this great and useful doc, but I still have some concerns.
https://supportforums.cisco.com/docs/DOC-16452
Basically, according to I see, I should do the following if I want to enable SSL optimization with the entire environment:
- export the certificate and keys;
- enable secure store in the central manager;
- In the remote and core WAE, Check "initialize CMS secure store" and "Open CMS Secure Store";
- In the core WAE, import the CA certificate (upload PEM file);
- In the core WAE, create the SSL Accelerated Service by:
    --importing the client certificate and the key;
    -- Match interesting traffic;
    -- Put the SSL Acc Service in service;
- Finally, make sure SSL acceleration is enabled in both remote and core WAE.
The concerns:
I only need to enable SSL optimization for a specific location accessing a specific website.
Should the steps above work fine If I enable the SSL service for this specific website in the core WAE and enabling secure store only in a single remote site (brach office)?
how will the other remote locations behave?
Will they access the website normally with no SSL optimization even passing thru the core WAE?
What about the other SSL sites which have no certificate? They will be treated as normal HTTPS with no optimization, right?
If the site uses proxy, will any flow be impacted?
If the steps above do not fit my case, how can I configure SSL optimization for only one remote WAE?
Thanks in advance.
importing the client certificate and key (client.crt and client.key exported from the Web server - See more at: https://supportforums.cisco.com/docs/DOC-16452#sthash.3BKz05zU.dpu

Hi guys.
I have to enable SSL optimization for a specifc HTTPS website only and for a specific remote site only (branch office).
The scenario is as follows:
Multiple sites connected via a MPLS cloud. Each site has its own WAE device (module or appliance).
There is a central manager and core WAE in the main site (central site).
There is a website accessed via HTTPS by all the remote sites. This specific website is hosted within the main site.
For only a specific branch office (remote site) we want to enable SSL optimization for this specific website.
I saw this great and useful doc, but I still have some concerns.
https://supportforums.cisco.com/docs/DOC-16452
Basically, according to I see, I should do the following if I want to enable SSL optimization with the entire environment:
- export the certificate and keys;
- enable secure store in the central manager;
- In the remote and core WAE, Check "initialize CMS secure store" and "Open CMS Secure Store";
- In the core WAE, import the CA certificate (upload PEM file);
- In the core WAE, create the SSL Accelerated Service by:
    --importing the client certificate and the key;
    -- Match interesting traffic;
    -- Put the SSL Acc Service in service;
- Finally, make sure SSL acceleration is enabled in both remote and core WAE.
The concerns:
I only need to enable SSL optimization for a specific location accessing a specific website.
Should the steps above work fine If I enable the SSL service for this specific website in the core WAE and enabling secure store only in a single remote site (brach office)?
how will the other remote locations behave?
Will they access the website normally with no SSL optimization even passing thru the core WAE?
What about the other SSL sites which have no certificate? They will be treated as normal HTTPS with no optimization, right?
If the site uses proxy, will any flow be impacted?
If the steps above do not fit my case, how can I configure SSL optimization for only one remote WAE?
Thanks in advance.
importing the client certificate and key (client.crt and client.key exported from the Web server - See more at: https://supportforums.cisco.com/docs/DOC-16452#sthash.3BKz05zU.dpu

In oracle B2B multiple files are getting picked from SFTP location for one file in custer environment

Flow is like :
REST ENDPOINT->OSB PROXYSERVICE->BUSINESS SERVICE->B2B SFTP LOCATION->B2B->SOA JMS Queue->SOA COMPOSITE-
Due to cluster environment, there is issue when B2B picks the file from SFTP location for Custom protocol using sftp listening channel. Sometimes B2B picks multiple files from SFTP location for just one copy of file. It is happening because of cluster environment 4 instances of server is looking into the SFTP location for picking the file and sometime 2 or more instances of server are reading same file and sending the copy to B2B.
Please let me know , how can I stop this behavior

All QFE's have been applied we are building the image so we have some control.
I have build an image which used the debug DLL's of the FATFS and I have enabled all of the DebugZones. The problem is still happening. From the timings in the debug logs and the timestamps in the data which corrupts the test file I have been able
to see that the file is corrupted AFTER the write is complete. Or at least that's how it seems.
We finished writing the file and closed the handle. Then more data is written to other files. When we get around to verifying the file it now contains data from the files that were subsequently written.
What I think I need to do is figure out in detail how the two files were "laid down" onto the SDCard. If the system used the same cluster to write the 2 files then that would explain the issue.

NetBeans or Eclipse: Which is better for GUI development ?

I am relatively new with JAVA, came from embedded software domain mostly in C.
My interest is to learn and develop the GUI applications using Swing.
I am currently in a process of evaluating the IDEs, Eclipse and NetBeans on Linux desktop environment (SuSE 10.3).
My primary findings found that, NetBeans is better equipped with GUI development while Eclipse needs to have a plugin installed.
For GUI development, I found that few of my fellow Java developer friends have mixed feelings about these two wonderful IDEs, in summary here are the comments:
1) Developing GUI is better without any assistance from built in designers of IDEs (e.g. NetBeans or Visual Swing of Eclipse). Because, they put extra 'garbage" codes which are very much IDE specific.
2) GUI development in NetBeans is faster and more productive than Eclipse
3) Visual Swing for Eclipse is not a matured product and it is far inferior than NetBeans' capabaility
Now I ask a question, what is the best practice to adopt for starting the GUI development ? NetBeans or Eclispse or IDE-less development ?
Thanks.

atomodachi wrote:
Now I ask a question, what is the best practice to adopt for starting the GUI development ?
NetBeansThis is my preference for IDE's. Please note that as I stated that is my preference. There isn't any best, some are clearly better than others for one reason or another, but once again, that boils down to personal preference.
EclispseNot my preference.
IDE-less development ?IMO: that is just silly. Unless you just enjoy tons of typing; why would you ever embark on doing something without a tool to speed up the process. Now that is not to say that in using your IDE you should start out by just dragging and dropping up a storm and merrily running down the road in ignorance until you hit a rough spot and have things dramatically pointed out that you've really not a clue about what is happening. Use the IDE, but learn how to do the manual processes along with it. That means that sometimes you'll not drag and drop to build your GUI, you'll actually code the entire thing. And you really should learn to do things command-line like compile. Do yourself a really big favor too, learn the debugger. The integrated debuggers is, perhaps, one of the best inventions in productivity tools that has as of yet been invented for developers.
In any case, have fun... choose what you like, it really does come down to personal preference. I've worked in several shops over the years and most have come to the conclusion that if you can get the work done, and have projects that others can use, then to each their own preferences. The discussion rages on for and against each of the systems that you have mention--each have valid arguments--it boils down to what do you want and like.

Enable the security configuration for this panel

Why do my panels built with Configurator sometimes display
this in Ps Cs4?
"Please close all panels or restart Photoshop to enable the
security configuration for this panel"
Closing panels or restarting Photoshop does not enable the
panels but exporting from Configurator does enable them. Why do I
have to keep exporting?

I believe I have stumbled on the answer to this problem, so I
would like to pass it along to any other users who have a similar
problem.
My experience is that this is an intermittent problem, so I
asked myself what do I do from time to time that could be causing
this difficulty. The answer is I use a program called CC cleaner to
clean out temporary files (that in theory I don't need). I found
that after running CC cleaner, I have to re-export the
configuration file (as I get the error message described in an
earlier posting) so that the configurator panel subsequently opens
properly when I open up C S 4.
I immediately ran CC cleaner again and found that it wanted
to delete only one group of files that were located in the
following folder:
C:\Documents and settings\user's name\application
data\Macromedia\flash player\*.*
Accordingly, I instructed " CC cleaner", to exclude this
folder and everything in it (from deletion):
Now if I run CC cleaner to get rid of all my temporary
Internet files and other temporary files, but it leaves the above
folder untouched, and so far the configurator panel opens up
properly in Photoshop.
I don't use Windows "disk cleaner" so I'm not sure whether or
not this cleaner represents a potential problem. In any event it's
the Macromedia folder described above that causes the problem.
It's clear that Adobe configurator uses Macromedia flash to
do its thing, so hopefully I've solve this problem
long-term.

Here is how to enable full screen mode for AIR Mac Desktop Apps

I just discovered that with a very simple native extension method, I can enable full screen mode for AIR Mac Desktop Applications.
This gets you the full screen icon in the top right, and it works perfectly with no changes to my code. (Obviously only works on Lion and above, since this is a Lion feature)
Enjoy.
Here's the code:
    FREObject _EnableFullScreenMode(FREContext ctx, void* functionData, uint32_t argc, FREObject argv[])
        //We should be okay to do this, even on 10.6, according to this post:
        //http://www.cocoabuilder.com/archive/cocoa/311124-implementing-full-screen-for-10-7-but-app-should-also-run-on-10-6.html
        //We can't use [NSApp mainWindow] - didn't appear to work
        //This seems to though:
        NSArray * allWindows = [NSApp windows];
        if (allWindows.count > 0)
            NSWindow *mainWindow = [allWindows objectAtIndex: 0];
            NSWindowCollectionBehavior behavior = [mainWindow collectionBehavior];
            behavior |= NSWindowCollectionBehaviorFullScreenPrimary;
            [mainWindow setCollectionBehavior:behavior];
        //TODO: Return a boolean instead depending on if we found the main window
        return NULL;

Press Control + Command + F on your keyboard to enter or exit full screen mode.

How the data is fetched from the cube for reporting - with and without BIA

hi all,
I need to understand the below scenario:(as to how the data is fetched from the cube for reporting)
I have a query, on a multiprovider connected to cubes say A and B. A is on BIA index, B is not. There are no aggregates created on both the cubes.
CASE 1: I have taken RSRT stats with BIA on, in aggregation layer it says
Basic InfoProvider     *****Table type      ***** Viewed at      ***** Records, Selected     *****Records, Transported
Cube A     ***** blank ***** 0.624305      ***** 8,087,502      ***** 2,011
Cube B     ***** E ***** 42.002653 ***** 1,669,126      ***** 6
Cube B     ***** F ***** 98.696442 ***** 2,426,006 ***** 6
CASE 2:I have taken the RSRT stats, disabling the BIA index, in aggregation layer it says:
Basic InfoProvider     *****Table Type     *****Viewed at     *****Records, Selected     *****Records, Transported
Cube B     *****E     *****46.620825     ****1,669,126****     6
Cube B     *****F     ****106.148337****     2,426,030*****     6
Cube A     *****E     *****61.939073     *****3,794,113     *****3,499
Cube A     *****F     ****90.721171****     4,293,420     *****5,584
now my question is why is here a huge difference in the number of records transported for cube A when compared to case 1. The input criteria for both the cases are the same and the result output is matching. There is no change in the number of records selected for cube A in both cases.It is 8,087,502 in both cases.
Can someone pls clarify on this difference in records being selected.

Hi,
yes, Vitaliy could be guess right. Please check if FEMS compression is enabled (note 1308274).
What you can do to get more details about the selection is to activate the execurtion plan SQL/BWA queries in data manager. You can also activate the trace functions for BWA in RSRT. So you need to know how both queries select its data.
Regards,
Jens

Which IDE is suitable for GUI in Java?

Which IDE is suitable for GUI in Java?
I have kind of complex form with many text fields and buttons in a Java application. I have been trying with Netbeans, everything is fine with Netbeans but it is a huge problem when all the graphics components move around when you have too many graphic....
I am looking for IDE with GUI tools??? Any suggestions???
Many thanx for all advices

I tested Eclipse 3.2 and NetBeans 5.5. NetBeans definitely has the more stable, reliable and more user friendly GUI editor.
From the rest of the development - the features of the IDE - I see that Eclipse offers more but with the drawback for the beginner (as I am) that some things are harder to figure out how they work in Eclipse. NetBeans seems more "intuitive" and easier for me. - Emphasizing again that I am a beginner.

Enable the Debug mode for Dispatcher and Server0.

Hello All,
In our EP server 7.0(stand alone java) apart from SDM we need to enable the Debug mode for Dispatcher and Server0.I tried to do it from mmc but cannot do so.When I try to right click & enable from mmc the "Enable Process" is not highlited,it is disabled.How Can I enable the the Debug mode for Dispatcher and Server0?

Hi
Goto Configtool Select Instance_IDxxxxx on the right side you can see "Servers Debug" tab, select that and choose, enable debug and debuggable options.
Save the settings.
Then expand the above mentioned node and select Server_IDxxxxxxx , you will see a tab Debug select it and choose, enable debug and debuggable options.
Save the settings.
After it is done, take a restart of the instance. This should help you.
Regards
Rahul

How do I download songs from iTunes Match for offline or spotty coverage?

I have a 64GB iPhone and want to be able to DOWNLOAD songs from iTunes match for use when I have spotty 3G coverage (or no coverage, or only expensive coverage, or on an airplane). How can I do this? Right now iTunes is not using any of my data storage on my phone for previously downloaded songs for future use (caching).

What you want to do actually has nothing to do with iTunes Match. What you need to do is enable automatic downloads in iTunes. Open iTunes prefs > Store and select the option for, at least, "music" and click OK. Now any music you buy will be downloaded to your iTunes library automatically. But iTunes will need to be running for this to happen.

Access Oracle 10g OLAP Analytic Worspace from BOE XI for Universes creating

Hi skilled!
Is there any environment to access Oracle 10g OLAP Analytic Worspace
from BOE XI (not from BOE XIR2) for Universes creating ?
Thank you.

Hello Walter,
Thanks for the response.
I'm using the following SAP GUI: 710 Final Release, Version 7100.2.7.1038, Build 971593, Patch-Level 7.
Trying to install the Desktop part of the integration kit results in the follwoing message: Unable to perform Desktop installation. The installation is unable to proceed with a desktop installation because Crystal Reports 2008 was not detected. To perform a Desktop installation, it must be installed.
Without having installed any integration kit on the client side, I can still see the data access driver for SAP Business Warehouse 3.x in the Universe Designer (when trying to define a new connection). After providing the respective parameters, however, a connection is not established successfully. When testing the connection it just tells me that the connection trial failed (SBO0001), without providing any further details.
What do you think, is the problem? The SAP GUI? Is it at all required for my purposes (generating OLAP universes in Designer from SAP BI) to install the integration kit on the client side? As far as I have read, it is?
Thanks, Konrad

Help Editing code from a published html file with flash detection enabled from flash

hi guys ive publish a html file with flash detection enabled from flash
heres the code from the publish html:

<html lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>main</title>
<script language="javascript"> AC_FL_RunContent = 0; </script>
<script language="javascript"> DetectFlashVer = 0; </script>
<script src="AC_RunActiveContent.js" language="javascript"></script>
<script language="JavaScript" type="text/javascript">

</script>
</head>
<body bgcolor="#ffffff">


<script language="JavaScript" type="text/javascript">

</script>
<noscript>
     // Provide alternate content for browsers that do not support scripting
     // or for those that have scripting disabled.
       Alternate HTML content should be placed here. This content requires the Adobe Flash Player.
       <a href="http://www.macromedia.com/go/getflash/">Get Flash</a>
</noscript>
</body>
</html>
now since the default codes places my flash movie on upper left corner, ive made my own tables with the flash on it, how or where do i place this code to the upper codes?
<table width="100%" height="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
    <th valign="middle" scope="col"><table width="800" border="0" align="center" cellpadding="0" cellspacing="0">
      <tr>
        <th height="600" bgcolor="#333333" scope="col"><script type="text/javascript">
AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0','wid th','800','height','600','src','main','quality','high','pluginspage','http://www.adobe.com /shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','movie','main' ); //end AC code
</script><noscript><object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0" width="800" height="600">
          <param name="movie" value="main.swf">
          <param name="quality" value="high">
          <embed src="main.swf" quality="high" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash" type="application/x-shockwave-flash" width="800" height="600"></embed>
        </object></noscript></th>
      </tr>
    </table></th>
</tr>
<tr>
    <td height="30" bgcolor="#990000"><table width="800" border="0" align="center" cellpadding="0" cellspacing="0">
      <tr>
        <th scope="col"><table width="800" border="0" cellspacing="0" cellpadding="0">
          <tr>
            <th scope="col"><div align="left" class="style1">Copyright 2009 St. Paul of the Cross Parish. All Rights reserved.</div></th>
            <th width="400" scope="col"><div align="right" class="style1">Usage outside our permissions guidelines requires our prior written consent.</div></th>
          </tr>
        </table></th>
      </tr>
    </table></td>
</tr>
</table>
Tnx in advance!

Hi
Can you tell me which version of dreamweaver you are using (and flash pro, if you have it), as the code you provided has element of a number of different versions (e.g. your js flash files are reasonably new, but your flash inserted into the html body is old, but with the cs3 version of flash player indicated!). Also the detect flash file is no longer required.
PZ

Enabled from boolean.vi for GUIs

Similar Messages

Maybe you are looking for