How to enable SSL optimization only for a single remote WAE and specific website?
Hi guys.
I have to enable SSL optimization for a specifc HTTPS website only and for a specific remote site only (branch office).
The scenario is as follows:
Multiple sites connected via a MPLS cloud. Each site has its own WAE device (module or appliance).
There is a central manager and core WAE in the main site (central site).
There is a website accessed via HTTPS by all the remote sites. This specific website is hosted within the main site.
For only a specific branch office (remote site) we want to enable SSL optimization for this specific website.
I saw this great and useful doc, but I still have some concerns.
https://supportforums.cisco.com/docs/DOC-16452
Basically, according to I see, I should do the following if I want to enable SSL optimization with the entire environment:
- export the certificate and keys;
- enable secure store in the central manager;
- In the remote and core WAE, Check "initialize CMS secure store" and "Open CMS Secure Store";
- In the core WAE, import the CA certificate (upload PEM file);
- In the core WAE, create the SSL Accelerated Service by:
--importing the client certificate and the key;
-- Match interesting traffic;
-- Put the SSL Acc Service in service;
- Finally, make sure SSL acceleration is enabled in both remote and core WAE.
The concerns:
I only need to enable SSL optimization for a specific location accessing a specific website.
Should the steps above work fine If I enable the SSL service for this specific website in the core WAE and enabling secure store only in a single remote site (brach office)?
how will the other remote locations behave?
Will they access the website normally with no SSL optimization even passing thru the core WAE?
What about the other SSL sites which have no certificate? They will be treated as normal HTTPS with no optimization, right?
If the site uses proxy, will any flow be impacted?
If the steps above do not fit my case, how can I configure SSL optimization for only one remote WAE?
Thanks in advance.
importing the client certificate and key (client.crt and client.key exported from the Web server - See more at: https://supportforums.cisco.com/docs/DOC-16452#sthash.3BKz05zU.dpu
Hi guys.
I have to enable SSL optimization for a specifc HTTPS website only and for a specific remote site only (branch office).
The scenario is as follows:
Multiple sites connected via a MPLS cloud. Each site has its own WAE device (module or appliance).
There is a central manager and core WAE in the main site (central site).
There is a website accessed via HTTPS by all the remote sites. This specific website is hosted within the main site.
For only a specific branch office (remote site) we want to enable SSL optimization for this specific website.
I saw this great and useful doc, but I still have some concerns.
https://supportforums.cisco.com/docs/DOC-16452
Basically, according to I see, I should do the following if I want to enable SSL optimization with the entire environment:
- export the certificate and keys;
- enable secure store in the central manager;
- In the remote and core WAE, Check "initialize CMS secure store" and "Open CMS Secure Store";
- In the core WAE, import the CA certificate (upload PEM file);
- In the core WAE, create the SSL Accelerated Service by:
--importing the client certificate and the key;
-- Match interesting traffic;
-- Put the SSL Acc Service in service;
- Finally, make sure SSL acceleration is enabled in both remote and core WAE.
The concerns:
I only need to enable SSL optimization for a specific location accessing a specific website.
Should the steps above work fine If I enable the SSL service for this specific website in the core WAE and enabling secure store only in a single remote site (brach office)?
how will the other remote locations behave?
Will they access the website normally with no SSL optimization even passing thru the core WAE?
What about the other SSL sites which have no certificate? They will be treated as normal HTTPS with no optimization, right?
If the site uses proxy, will any flow be impacted?
If the steps above do not fit my case, how can I configure SSL optimization for only one remote WAE?
Thanks in advance.
importing the client certificate and key (client.crt and client.key exported from the Web server - See more at: https://supportforums.cisco.com/docs/DOC-16452#sthash.3BKz05zU.dpu
Similar Messages
-
How to update PO Price only for a single line item and not other Line Item
Hi
My requirement is not to update Price of PO from PIR if the Final Invoice Indiactor is not set and it is not a return PO. I am trying to do this using
BAPI_PO_CHANGE to update price automatically from Pricing record using
POITEM-PO_ITEM = '00001'
POITEM-CALCTYPE = 'B'.
POITEMX-PO_ITEM = '00001'
POITEMX-CALCTYPE = 'X'.
The price gets updated for the line item 1 as well as other line item which I do not want. Please can you tell how to restrict that.
Is it possible to restrict through configuration if this indicator is set there should be no price update. I tried to check in ME22n and if I update the condition item by pressing the update button the other item price also gets updated.
Thanks
ArghadipTimestamp is date and time together in one field..
Search for data element TIMESTAMP.
If you are getting this in your table.
If you are getting time and date in different fields then you can use the function module
given below....
CALL FUNCTION 'DELTA_TIME_DAY_HOUR'
EXPORTING
t1 =
t2 =
d1 =
d2 =
IMPORTING
MINUTES =
Then you can convert minutes into seconds..
Function module credit to BrightSide it works....but only it will give difference in minutes
Regards,
Lalit Mohan Gupta. -
How to enable SSL for policy service?
Hi all,
My application is using SunONE's C API to communicate with the Identity Server.
In order to enable SSL, I have changed the following lines in amconfig.properties:
com.sun.am.namingURL = https://id01.core.development.net:443/amserver/namingservice
com.sun.am.policy.am.loginURL = https://id01.core.development.net:443/amserver/UI/Login
com.sun.am.policy.am.library.loginURL = https://id01.core.development.net:443/amserver/UI/Login
After operating these changes, everything continued to work fine...but then, I checked with a network sniffer what data is being sent to IS:
- The login and naming data were over SSL
- Policy and session items were plain HTTP
My questions are:
1. How to enable SSL for policy evaluation requests?
2. How to enable SSL for sessionservice requests?
3. What are the changes required on the server/client?
Many thanks,
DanThere might a better different forum for this question.
-
How to enable SSL in iChat 3.1.9
Can anyone please tell me how to enable SSL in iChat 3.1.9 for Tiger? I am having the error "Cannot connect to AIM." I was having on my Leopard macbook, but I enabled SSL and it works now. However, I can't see where to enable SSL in my iMac? Thanks ahead of time for any help!
Ok, upon doing research, I hav found out that there is no SSL to enable until ichat 4.
-
How to enable SSL in oracle 11i
HI
1)How to enable SSL in oracle 11i
2)How do I make an oralce 11i instance available on the internet
can some one suggest the procedure and the metalink doc or forums that can be referred to for better understanding and using the applcaitons
RegradsRefer to the following notes:
Note: 123718.1 - 11i: A Guide to Understanding and Implementing SSL for Oracle Applications
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=123718.1
Note: 217368.1 - Advanced Configurations and Topologies for Enterprise Deployments of E-Business Suite 11i
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=217368.1
Note: 229335.1 - Best Practices For Securing Oracle E-Business Suite 11i For Internet Access
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=229335.1 -
How to enable file size 2GB for linux RHEL4.0
Hi
I am on oracle 9.2.0.6 on linux RHEL 4.0. How do i enable large file size for filesystems.
When i query ulimit -a ulimit -f it is returning me unlimited.
But my database listener crashed as listener log file reached 2gb in size.
I couldnt find how to enable the largefile size for the filesystem.
Thanks
SVAre you sure that the filesystem is limiting your listener log file size?
Please try to concatenate some lines into the logfile and see if the filesystem prevents it. I expect you to find out that the limit is only with the listener.
In any case, run a weekly/monthly job that creates an empty log file.
If the problem is with ext3 then you should check with someone more experienced because it does not sound to me like the proper (or default) behavior of ext3. -
How to enable OHS compression/cache for OBIEE
Hi i have installed OHS (11.1.1.7) and webcache on OBIEE 11.1.1.7. Does any one know how to enable/configure compression/cache for OBIEE analytics? Also how to validate if compression is working?
Hi Anke,
all tables that have been created in V9.7 with attribute COMPRESS YES will be compressed statically .
db2 " select count(*) , rowcompmode from syscat.tables group by rowcompmode "
After the upgrade to 10.5 all tables created with attribute COMPRESS YES will get rowcompmode='A' but old tables created with V9.7 will stay with rowcompmode='S' .
You can change tables from rowcompmode='S' to rowcompmode='A' via ALTER TABLE . After this all new pages or old pages that are touched will be adaptively compressed. But old pages that are not touched will only be static compressed. To get all pages of an existinbg table adaptive compressed you need to move data. For example with DB6CONV.
Regards
Frank -
How to change the permission of a folder of a website hosted on Microsoft Azure. I would like to know how to enable read write permission for this folder
Regards,
JohnHi,
Please try to setting Folder Permissions on Web Publish, and then deploy it with Web Deploy, as far as I know, if we do that, Web Deploy will use the SetAcl operation to change permissions. Please have a look at the article below.
#http://sedodream.com/2011/11/08/settingfolderpermissionsonwebpublish.aspx
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How to approve the request only for one time for human task in BPM Worklist
Hi All,
I'm having a requirement where i have made the hierarchy in the .task file where in created two users for which i need an approval in a hierarchical manner. But when i'm approving the request from worklist app for one user and the request is going sucessfully to the second user and if i approve it over there it once again coming to first user where i have approve it once again to get the request processed. how to get request processed only for one time when it is approved. Do we need to customize anything
If you did it can anybody can share thoughts on this please. Your help is highly appreciated.
I am not able to see the rejected request at all. where to see the rejected request.
Regards,
CHHi,
Following are the some important points you should understand about ESS Leave Request Workflow
1. The Visualization ( how should it appear in UWL and what should happen when you click on a particular workitem) is defined in SWFVISU. Check for TS12300097. Generally, it invokes com.sap.xss.hr.lea.appl/LeaveRequestApprover Java WebDynpro application. Just check whether you are able to get the correct Leave Processing application called when you execute your workitem from UWL?
2. In general it should have option to process the leave request either approve/reject. When the leave request gets approved/rejected the status of the Leave Request document gets changed ( in workflow it is &REQ.STATUS&
3. There is a need to schedule a background job for program RPTARQPOST which will pick up all the documents in APPROVED status and creates an absence record for the same.
4. Apart from schedule job as mentioned above, you also have to schedule a background job for program RPTARQEMAIL, which is basically used to send e-mails for all the documents which are yet to be approved to correct manager.
as you say , you can not see Approve/Reject options from UWL, it looks to me that correct javawebdynpro application is not being called for this task. Just check this !!
Good Luck !!
Regards
Krishna Mohan -
How do you schedule weekdays only for iCal app on iPhone?
how do you schedule weekdays only for iCal app on iPhone?
aprishwrs,
The scheduling options on the iPhone are limited to non-existant. You will have to use your Desktop iCal to make any desired repeat options. -
How to enable SSL in order to access web appln. deployed in CE using https?
Hi,
I am new to Netweaver and this forum. Not sure if I am posting my question in right forum category. Please let me know otherwise.
Question -
I would like to know how to enable SSL in order to access the deployed web application in Netweaver environment using https instead of http.
System Info:
Netweaver 7.1
Database: SAP DB (KERNEL 7.7.04 BUILD 021-123-186-883)
OS: Linux (amd64) 2.6.18-194.el5
Note: I have general idea about how to enable SSL in a non-SAP application server like tomcat using valid certificate (like enabling SSL in tomcat and adding certificate to server & Java keystore). But since I am new to Netweaver, not sure how to enable the same in Netweaver environment.
Any help would be much appreciated.
Thanks
Edited by: Gopi.j on Oct 15, 2010 8:04 PMhi
check the following sap help.
http://help.sap.com/saphelp_nwce71core/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm
Best regards,
John -
HOW to enable oracle advance compression for EXIST partitioned table
Hi All,
I have to enable oracle advance compression for existing table which PARTITION BY RANGE then SUBPARTITION BY HASH.
ORacle version: 11.2.0.2.0
Please provide me any relevant doc or any exp.
Thanks in advance.could not see any text for how to enable oracle advance compression for EXIST partitioned table.RTFM.
From the resource above:
How do I compress an existing table?
There are multiple options available to compress existing tables. For offline compression, one could use ALTER TABLE Table_Name MOVE COMPRESS statement. A compressed copy of an existing table can be created by using CREATE TABLE Table_Name COMPRESS FOR ALL OPERATIONS AS SELECT *. For online compression, Oracle’s online redefinition utility can be used. More details for online redefinition are available here.
" -
Hi All
Does anyone know how to enable the "Delete" key for logging on the Windows 7 partition on the latest iMac, via the latest Apple wireless keyboard - the standard wired apple keyboard works fine via this key but not the new wireless keyboard?
Many ThanksHoly crap, this fixes the issue. At least temporarily it has. I should add that my issue was single finger forward/back swipe stopped working on the magic mouse in Firefox since Mavericks came along. I have been fighting this since I upgraded to Mavericks a few months ago. Thank you, tbirdvet. You have no idea how much easier you just made using my iMac again.
Message was edited by: wadems -
How many implimentations can be done for a single BADI definition?
How many implimentations can be done for a single BADI definition?
Is there any restriction to impliment a single BADI definition?
Plz answer with proper explanation....
Thank you in advance
REgards,
Chaitanyahi Krishna Chaitanya,
In a badi if the "Multiple Use" Checkbox is checked then You can have any number of Implementations for the BADI
Say I have defined a BADI "BADI1"
and I have 3 implementations
IMP1
IMP2
IMP3
The order of execution will be IMP1, IMP2 and IMP3
In a badi if the "Multiple Use" Checkbox is not checked then You can have ONLY ONE Implementation for the BADI
Say I have defined a BADI "BADI1"
and I have 3 implementations
IMP1
IMP2
IMP3
Only one Implementation can be active at a time and only that will get executed
Hope this helps a bit
Reward if Useful
Cheers
Kripa Rangachari. -
How do I change the volume for a single midi instrument in GarageBand 10? Every time I move the volume, it moves back!
Every time I move the volume, it moves back!
Check, if you have a volume automation set on the software instrument track.
If the track volume automation curve is enabled, the volume slider for the track will move with the automation curve.
Click the automation curves disclosure triangle in the track header and disable the volume automation.
Maybe you are looking for
-
Will I loose my apps if I setup a new Apple ID
Hi, My old ipad has been lying around for couple of months unused so I am thinking of giving it to my dad. On that ipad I have several apps (both paid and free). Now before I give it to my dad, I would of course erase the ipad (and remove my apple id
-
Firefox 21.0 android will not display websites but will when highlighted then searched
on my tablet android 4.0.4 when I load a website, the address bar shows the site has finished loading but the site is empty. if I then touch and highlight the address then push search, the page displays immediately. any clues guys?
-
TS1424 How do i resolve error: this purchase is not available in philippine store?
How do i resolve:purchase is not available in philippine store? I want to download tv shows, movies and music
-
Can someone with a long memory help me out? I'm trying to remember what was at sh-opt-2 on the standard Mac keyboard before the location was reassigned to the Euro (sometime after 1998, I assume, since that's when it entered Unicode). I thought it wa
-
I forgot my security answers ! and i can't reset it from the ID sitting what most i do to reset it? when i press the link to reset my security answers they send my link to reset password!