Enabling blog comments is not working for me

I have a site with a blog, but checking the blog enabling checkbox does not enable blog comments. Any clues?
Thanks.
Ed

There are other things that need your attention regarding modified prefs that show in your system details list.
Reset the general.useragent.compatMode.firefox to false and all network.http prefs on the <b>about:config</b> page.
*http://kb.mozillazine.org/about:config
What is the value of the browser.sessionstore.max_tabs_undo pref?
* http://kb.mozillazine.org/browser.sessionstore.max_tabs_undo
* http://kb.mozillazine.org/browser.sessionstore.max_windows_undo

Similar Messages

Software Update Point Switching is not working for some Clients

Hi there,
I found nothing similar here and I hope this is the right section.
I´m running ConfigMgr 2012 R2 where one of the Site Systems from one of the Primaries is located in an untrusted Forest in a perimeter Network. The Site System there has the MP, SUP and DB Roles. In general it works great. The Systems in that untrusted Forest
get the SCCM Agent pushed, see and can install published Software packages and receive Windows Updates. But there are a few systems where everything works, except Windows Updates.
So I had a deeper look at what is happening and found out that the SUP switching is not working for them. They always try to contact the SUP from the Primary, which they cannot reach (this is intended).
From how I understand SUP switching as described here
http://blogs.technet.com/b/configmgrteam/archive/2013/03/27/software-update-points-in-cm2012sp1.aspx#pi140062=1
the Windows Update Agent tries to connect to a SUP every 30 minutes and after 4 failed attempts he will try to connect to the next one until he finds one which works.
As I said before, this seems to work for most systems in the untrusted forest, but some do not make any intentions to switch the SUP.
So my next step was to find out from where the Update Agent can get the information of the available SUPs. I think they either don´t receive the information that other SUPs exist, or if the Information is there, they don´t realize that there´s an error and
make no attempt to switch.
I used the System Center Support Center to gather all Information from some of the systems with that problems (Log Files, WMI information, registry information, policies etc.) but I cannot find where SCCM or the Update Agent store the information which SUPs
are available in my environment.
I´m sure the problem is on the Systems which fail to connect to the right SUP and not in the SCCM infrastructure itself, because for most of the systems everything is working just perfect. Unfortunately in the Blog Post above there´s also no information
where this information is stored and how it is obtained by the clients. In the comments there´s even one post which describes the same problem I have here, but there was no answer. I hope someone can point me into the right direction, because I´m stuck currently.
Things I tried additionally to all the log file / WMI / registry sniffing:
Removing the Software Distribution Folder and restarting the Windows Update Agent
Removing the WindowsUpdate Registry folder in the HKLM\SOFTWARE\Policies\Windows section in the Registry and restarting the Windows Update Agent.
Tried to reset the WUAgent with wuauclt /Resetauthorization additionally to the steps above.
I also tried to manually set the WUServer and WUStatusServer Keys in the registry to the new Server, but as soon as the next Update Scan cycle runs, the value is set back to the URL of the Primary Sites SUP
Is someone having additional ideas? It seems to me older systems are more affected (which were configured for a standard WSUS before SCCM 2012 was deployed) than newer ones which were installed when SCCM was in place already. But I don´t know what else to
"reset" on those machines without reinstalling them.

Thank you very much for your response. I must have missed that one by looking through numerous Logfiles. In this, there´s indeed a list of all available SUPs. So according to the LocationServices.log the machine should have a choice.
The WMI Key however, contains just one entry and this is the URL of the Primaries SUP which is not reachable in the untrusted forest. Is it OK that the WMI entry includes only one entry? If yes, what process is putting the results from the LocationServices
into WMI? It seems like the Windows Update Agent is feeded from the WMI Key then. If this is the case my problems seems to be the "communication path" between these two components.
Is this the job from the SCCM Agent, the Windows Update Agent or maybe some third component I´m not aware of? I wonder how I can fix this.

Incoming Email not working for one web app, but IS working for others in same farm.

I have enabled incoming email in a large multi-web application farm running SharePoint 2013 SP1 and the Feb 2015/March 2015 CUs that were pushed down in Windows Updates. It works just fine for two web applications, but it will not work for one particular
web application. I see the email land in the /drop folder. If I remove the email address from the library in http://nonworkingapp web
application and use it on a library in a http://working web application, then the email is processed successfully. Conversely,
if I take an address from a library in http://working and move it to a library inhttp://nonworkingapp it
does not work. I've tried multiple site collections on http://nonworkingapp. This rules out any SMTP issues, etc. and means
the issue is bound to this web application. Permissions are the same between the "non-working" and "working" locations: domain users are members on the site, and the library inherits permissions from the site. The App Pool and Timer
Service accounts have rights to the folder and to the library.
The error in the ULS log is the typical error processing message, but it gives no additional information even though I have enabled Verbose logging.
The Incoming E-Mail service has completed a batch. The elapsed time was 00:00: 00.0156294. The service processed 2 message(s) in total. Errors occurred processing 2 message(s): Message ID: Message
ID:
Typically, you see "alias not found" or some permissions or quota issue here, but this issue is NOT the same as those. In this case NO additional information is provided in ULS.
Edit: running stsadm.exe -o refreshdms -url http://one/failing/site fixed some similar issues where "Unknown alias" was
reported even though the list did have an alias (see here:http://blogs.technet.com/b/vinitt/archive/2009/07/15/e-mail-enabled-list-alias-information-is-not-synchronized-between-configuration-database-and-content-database.aspx).
This did not fix the issue for the case mentioned above.
What could possibly be the issue preventing incoming email from working on this one web application?

Thanks for your reply. Incoming E-Mail was running on all 3 WFE, however I do not think this was the cause. As noted, _other_ emails send to http://workingapp are working just fine. I can send two emails - one to a library on http://workingapp
and another on http://notworkingapp. The email to http://notworkingapp will sit in the drop folder, while the one to http://workingapp will be processed correctly. In addition, the ULS log on WFE1 indicates an attempt to process the file fails.
So clearly, the timer job on WFE1 is running and attempting to process the file. For kicks, I disabled the service on WFE2 and WFE3, but with no change in the behavior.
WRT to #1, I have done this already (as noted in the original post). I can remove an alias from http://workingapp and place it on http://nonworkingapp and it is not processed. If I return it to http://workingapp it is processed. In other
words, I go into Library Settings -> Incoming Email for a working library, and copy the alias, then disable incoming email for that library. I then go to Library Settings -> Incoming Email for a non-working library, enable incoming email, and paste
the alias. Once done, emails sent to the alias are not processed. I then do the reverse, and it works again.
On #2, I have already tried multiple libraries on http://nonworkingapp (also as noted in the original post).
In my environment, incoming email does not work for any library on http://nonworkingapp, but does work for any library on http://workingapp. Troubleshooting listed above has ruled out any problem with basic mail server configuration or library settings
- the problem is bound to http://nonworkingapp
I'm not sure what you mean by "steps to reproduce the issue". If I knew that, I would probably be able to solve the issue. The best I could come up with to describe the situation would be:
Set up SP 2010 in a three-node configuration with multiple web apps
Enable incoming email and confirm it works
Migrate to a SP2013 SP1 farm in a three node configuration.
Enable a new email alias for a library
Observe that it doesn't work for one web application.
Obviously, it's pretty unlikely that attempting that in a lab would actually have the same result.

OOF not working for mailboxes homed on Exchange 2010 server during migration

Hi There
I'm troubleshooting an issue during a exchange 2010 to exchange 2013 migration where the OOF is not working for users homed on the exchange 2010 mailbox servers. This applies to users using outlook 2010 and outlook 2013 .OWA works perfectly and you can also
enable OOF via exchange powershell.
Users homed on the exchange 2013 servers does not have any issues.
The exchange 2010 servers is on SP3 rollup 4 and the 2013 servers on SP1 only without any rollups installed.
So my question will be - have anyone experienced this issue during migration and will patching the exchange 2010 servers to rollup 5 or 6 and the exchange 2013 to sp1 rollup 5 fix the OOF issue then? If requested the client to patch to these levels, but
in the meantime I'm checking if anyone else had similar issues.
Any pointers will be welcome.

Hi ,
1.Please check the problematic exchange 2010 user account can able to access the ews virtual directory internal url and you can check that via browser's.It will prompt for the user name and password , please provide that .
EWS url wopuld be like - https://mail.youdomain.com/EWS/Exchange.asmx
2.Then the second step would be autodiscover check for the problematic user account.you can find that via test email configuration .There you came to know whether outlook is fetching up the proper url for ews and autodiscover.
3.Then please un check the proxy settings in browsers and check the same.
4.please use the command to check the auto discover
test-outlookwebservices
Please check the below links also.
http://exchangeserverpro.com/exchange-2013-test-outlook-web-service/
http://www.proexchange.be/blogs/exchange2007/archive/2009/07/14/your-out-of-office-settings-cannot-be-displayed-because-the-server-is-currently-unavailable-try-again-later.aspx
http://port25guy.com/2013/07/20/user-cannot-set-an-out-of-office-in-exchange-20102013-or-eventid-3004-appears-in-your-event-log/
http://www.theemailadmin.com/2010/06/exchange-server-2010-out-of-office/
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Brushes are not working for lightnening

My brushes do not work, for lightening. I restet them and did control alt shift already.

Looks like an Timer job Issue for your web application. Can you please check if these jobs are enabled and check error log for the alerts Timer jobs .Check whether the "Immediate Alerts" job is enabled for your web application.
job-immediate-alerts
job-daily-alerts
job-weekly-alerts
Please check this wiki -
Troubleshooting Steps for SharePoint Alert Email Does Not Go Out
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

Why is Cfgrid not working for me

I am using CFMX7
Why is this not working for me?
This is Gridtest1.cfm
<cfoutput>
<CFFORM align="center" ACTION="gridtest2.cfm"
METHOD="POST"
name="getstuff" >
<cfinput type="HIDDEN" name="ID" value="#form.id#" >
<cfinput type="HIDDEN" name="customerno"
value="#form.customerno#"
>
<cfgrid name="Mygrid" width="960" query="getpermits"
gridlines =
"yes" rowheaders="yes"
selectmode = "edit" height="350" >
<cfgridcolumn name="id" bgcolor="##FFFFFF" header="ID"
display="yes" WIDTH="40" select="no">
<cfgridcolumn name="permitno" bgcolor="##FFFFFF"
header="Permit
No" display="yes" width="70" select="yes">
<cfgridcolumn name="sortorder" bgcolor="##FFFFFF"
header="SortOrder" display="yes" WIDTH="62" select="yes">
</cfgrid>
<div align="center">
<cfINPUT TYPE="submit" VALUE="Save My Changes"
NAME="savemychanges"
>
</div>
</cfform>
</cfoutput>
This is GridTest2.cfm
Form fields:
<cfoutput>[#form.fieldnames#]</cfoutput>
Form values:
<cfloop list="#form.fieldnames#"
index="idx"><cfoutput>#idx# =
#Evaluate(idx)#</cfoutput>
</cfloop>
<cfif isdefined ("form.savemychanges")>
<cfgridupdate grid="mygrid" datasource = "divwt"
tablename =
"tankerpermits" keyonly="yes" >
</cfif>
<cfoutput>
form.#__CFGRID__GETSTUFF__MYGRID#.original.#permitno#
</cfoutput>
Output from TestGrid2.cfm reflects a �funny
looking� grid name and I
can see in the output that Permitno is definitely a defined
field.
Form fields:
[ID,CUSTOMERNO,SAVEMYCHANGES,__CFGRID__GETSTUFF__MYGRID]
Form values:
ID = 13
CUSTOMERNO = 21691
SAVEMYCHANGES = Save My Changes
__CFGRID__GETSTUFF__MYGRID = __CFGRID__EDIT__=3 id N Permitno
Y
sortorder Y 1 U 571 z
Element __CFGRID__GETSTUFF__MYGRID.ORIGINAL.PERMITNO is
undefined in
FORM.
The error occurred in
C:\cmudintranet\Purple\divwt\bftankertruck\gridtest2.cfm:
line 147
#form.__CFGRID__GETSTUFF__MYGRID.original.permitno#
Thanks in Advance

Lorna, be careful. This could cause your comments
to stop working. Blog comments are
sensitive..................
.......... Lorna says ................................................
Allyson, your precaution comes on the heels of me realizing that if I put a song on a blog summary page, then I will have to edit the .js file every time I add a blog entry.
Whereas MassReplaceIt could solve the problem there, the added issue of problems with comments is enough to make me stay away, so that is what I will do: No music within 250' of the blog guy.
Lorna in Southern California

Alerts are not working for Site collections in a content database

Hi,
We have been into a strange issue that alerts are not working for site collections from a particular content database. When user subscribed for the alerts, they are getting mail about their subscription but not after that for any new items/documents added
or changes happen in the list/document library.
We have tried with Immediate as well as scheduled alerts both are not working.
FYI, Alerts for all other site collections from different content database for the same web application are working without any issues.
Any help would be appreciated.
Thanks
Ramkumar

Looks like an Timer job Issue for your web application. Can you please check if these jobs are enabled and check error log for the alerts Timer jobs .Check whether the "Immediate Alerts" job is enabled for your web application.
job-immediate-alerts
job-daily-alerts
job-weekly-alerts
Please check this wiki -
Troubleshooting Steps for SharePoint Alert Email Does Not Go Out
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

Wake on Demand: Not working for some services, others OK

I haven't been able to figure this problem out... Wake on Demand for a previous generation Mac mini running Snow Leopard 10.6.8 works for things like a CrashPlan automated backup but does not work for things like remote SSH login or Screen Sharing. In all cases, the services are being originated on a latest generation iMac running Mac OS X Lion (10.7.2).
While it's not an earth-shattering event to get off my backside and walk over to the Mac mini across the house to press its Shift key to waken the thing, it gets rather old to have to keep doing so, especially since CrashPlan automated backups are taking place while the Mac mini is otherwise asleep (the sleep indicator is slowly pulsing).
I've been through the Apple tech notes regarding Wake on Demand for Snow Leopard 10.6 and have ensured that AirPort and its network are at the top-most position in their respective lists. Other than that, I'm not sure what else I can do. Wake on Network is enabled in the Snow Leopard Mac mini's network System Preferences and there doesn't seem to be any on/off option in the AirPort Extreme base station (just recently updated to 7.6 firmware).
Any thoughts... hints... suggestions?
One final note: this Mac mini is new as of July 2011; just days before the latest generation of Mac mini came out. It came pre-installed with Snow Leopard and, as soon as the users of this mini find software replacements for the old PPC style applicaitons they're used to using, will be upgraded to Lion. However, I feel a bit unsettled in making the move to Lion if I can't get a Snow Leopard feature to work properly. There's no telling if the Lion upgrade will actually fix this behavior or make it worse.
Thanks in advance.

I don't think you can wake on network with a closed lid. Try keeping the lid open and putting the machine to sleep. Does it work?

Outlook autodiscover is not working for some users in coexistence

Hi
We are doing exchnage 2013/2010 coexistence
Most everything is ok BUT outlook autodiscover is not working for some exchange 2010 users now that 2013 is in the front!!!. We end up creating the profiles manually. It has affected some but not all the users.
I followed the instructions here but it didn't help.
http://blogs.technet.com/b/tips_from_the_inside/archive/2012/01/11/autodiscover-fails-for-one-or-more-users.aspx
Using outlook 2010, 2013, patches, .... didn't make a difference
Would you please help?
Thank you

Hi
If it is affecting only few handful of users i could suspect a mailbox corruption and would recommend to move mailbox and see the results.
Also you can try below
You need to set the values MaxFieldLength, MaxRequestBytes & MaxTokenSize to below on Exchange 2010 CAS servers as well as Exchange 2013 CAS servers
Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
Name: MaxFieldLength
Type: DWORD
Value: 65534
Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
Name: MaxRequestBytes
Type: DWORD
Value: 16777216
Path: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\Kerberos\Parameters
Name: MaxTokenSize
Type: REG_DWORD
Value: 48000
Just reboot the servers once its done and you will be good to go.
References
https://social.technet.microsoft.com/Forums/en-US/cc2929ac-4d36-4e84-a567-ce9b3bec1398/http-400-bad-request-on-iis-8-exchange-2013-cu2-on-windows-server-2012-autodiscovery-is-not?forum=exchangesvrgeneral
http://blogs.technet.com/b/kristinw/archive/2013/03/28/recommended-changes-and-enhancements-to-support-exchange-in-an-enterprise-environment-whew.aspx
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

My apple id is not working for my iPhone activation. Please help me.

my apple id is not working for my iPhone activation. Please help me.
i'll just restore it.

Not working in what way?
Only the Apple ID that was used to enable "Find My iPhone" on the device can be used to bypass Activation Lock.

Search is not working for MS Word documents

Hi,
serious help required for search operation.
Search operation is not working for MS Word Documents.
i noticed that, after chekin word documents its status comes as
GENWWW.
i already enable file format & extension for word file.
can somebody help me in this regard.
Thankx in advance

Hi
Please enable the tracing option for :
requestaudit,indexer
Enable Full Verbose Tracing .
Checkin the Ms-Word document and once it fails then check the view server o/p under System Audit Information page and post the error message happening for indexing operation .
Thanks
Srinath

ValueChangeListener is not working.for disable property

valueChangeListener is not working for disable property with following details. Requirement is to enable to date if from to date is entered.
Field 1:
<af:inputDate value="#{bindings.PrintFromDate.inputValue}"
label="#{bindings.PrintFromDate.hints.label}"
required="#{bindings.PrintFromDate.hints.mandatory}"
shortDesc="#{bindings.PrintFromDate.hints.tooltip}"
id="id2" autoSubmit="true"
*valueChangeListener="#{reprintBean.enableToDate}">*
<f:validator binding="#{bindings.PrintFromDate.validator}"/>
<af:convertDateTime pattern="#{bindings.PrintFromDate.format}"/>
</af:inputDate>
<af:inputDate value="#{bindings.PrintToDate.inputValue}"
label="#{bindings.PrintToDate.hints.label}"
required="#{bindings.PrintToDate.hints.mandatory}"
shortDesc="#{bindings.PrintToDate.hints.tooltip}"
id="id1"
*disabled="#{!requestScope.enableToDate}"*
*partialTriggers="id2"*>
<f:validator binding="#{bindings.PrintToDate.validator}"/>
<af:convertDateTime pattern="#{bindings.PrintToDate.format}"/>
</af:inputDate>
public void enableToDate(ValueChangeEvent valueChangeEvent) {
System.out.println("IN enableToDate");
if (valueChangeEvent.getNewValue() != null) {
FacesContext context = FacesContext.getCurrentInstance();
System.out.println("Enable to Date");
context.getExternalContext().getRequestMap().put("enableToDate",true);
Please suggest me what is wrong on this.
Edited by: SrinivasA on Jan 28, 2011 5:34 PM

I still not able to achive this. (null the to date value if the FromDate has changed)
<af:inputDate value="#{bindings.PrintFromDate.inputValue}"
label="#{bindings.PrintFromDate.hints.label}"
required="#{bindings.PrintFromDate.hints.mandatory}"
shortDesc="#{bindings.PrintFromDate.hints.tooltip}"
id="id2" autoSubmit="true"
*binding="#{reprintBean.fromDate}"*
*valueChangeListener="#{reprintBean.enableToDate}"*>
<f:validator binding="#{bindings.PrintFromDate.validator}"/>
<af:convertDateTime pattern="#{bindings.PrintFromDate.format}"/>
</af:inputDate>
<af:inputDate value="#{bindings.PrintToDate.inputValue}"
label="#{bindings.PrintToDate.hints.label}"
required="#{bindings.PrintToDate.hints.mandatory}"
shortDesc="#{bindings.PrintToDate.hints.tooltip}"
id="id1"
disabled="#{bindings.PrintFromDate.inputValue eq null}"
binding="#{reprintBean.toDate}"
*partialTriggers="id2">*
<f:validator binding="#{bindings.PrintToDate.validator}"/>
<af:convertDateTime pattern="#{bindings.PrintToDate.format}"/>
</af:inputDate>
Value change method:
public void enableToDate(ValueChangeEvent valueChangeEvent) {
*setToDate(null);*
This method is not able to reset the to date value to null. Please help to find the issue here.
Edited by: SrinivasA on Feb 1, 2011 5:12 PM

Alert is not working for a library

Hi,
Alert is not working for one library in a site collection only. For others it is working fine. So, we have taken the template of the library and created a new library and tested there, alerts are working fine also.
So any idea what can be the issue?

Hi
Try troubleshooting using the link
http://blogs.technet.com/b/steve_chen/archive/2009/11/20/alerts-in-sharepoint-troubleshooting-moss-wss.aspx
Please remember to click 'Mark as Answer' on the answer if it helps you

Out of office replies in Exchange 2013 not working for external recipients

Hi,
Few days ago a couple of company workers went to vacation. They set up OOF automatic replies in OWA 2013. However automatic replies are not working for external recipients (outside of company). Internal users (company users) receive OOF notification.
I'm using smart host in sender connector configuration (SMTP server of internet provider) to deliver emails. Any clues about this problem ? Please find below part of the transaction log. For testing purposes i set up administrator account
to be on vacation.
HARED... SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
RECEIVE SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
DROP     ROUTING
[email protected]
{[email protected]}             Automatic reply: vacation test
AGENT... AGENT    [email protected]
{[email protected]}             Automatic reply: vacation test
HARED... SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
RECEIVE SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
AGENT... AGENT    [email protected]
{[email protected]}             Automatic reply: vacation test
TRANSFER ROUTING [email protected]
{[email protected]}             Automatic reply: vacation test
FAIL     SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test

Hi Informus,
Please check if it is allowed in AllowedOOFType of the Remote Domain *
In Exchange 2013, the only way to see or change the current configuration for automatic replying and forwarding to the Internet is via the Exchange Management Shell (EMS) with PowerShell commands.
To get the currently configured Remote Domains, use:
Get-RemoteDomain
Name                           DomainName
AllowedOOFType
Default                        *
External
Get-RemoteDomain Default | fl AllowedOOFType, AutoReplyEnabled, AutoForwardEnabled
AllowedOOFType     : External
AutoReplyEnabled   : False
AutoForwardEnabled : False
To change the settings, use the Set-RemoteDomain command.
Enable automatic replies
Set-RemoteDomain -AutoReplyEnabled $true
Enable automatic forwards
Set-RemoteDomain –AutoForwardEnabled $true
Enable OOF for Outlook 2003 and previous (for Exchange 2007 and 2010 support)
Set-RemoteDomain –AllowedOOFType $ExternalLegacy
To change all these properties at once, you can use:
Set-RemoteDomain Default -AutoReplyEnabled $true –AutoForwardEnabled $true –AllowedOOFType $ExternalLegacy
Note:
Valid settings for the AllowedOOFType property are:
External
This is the default and only allows for the new style OOF messages as introduced in Outlook 2007.
ExternalLegacy
This settings allows for both the new style and old style OOF messages and needs to be set if you want to enable external OOF support for Outlook 2003 as well.
None
This setting doesn’t allow for the use of OOF messages at all (both internal and external).
InternalLegacy
This setting only allows for internal OOF messages to be sent for all Outlook versions.
Regards,
Satyajit
Please “Vote As Helpful”
if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

Converting from 2D to 3D not working for me

I am trying to follow the tutorial "Converting from 2D to 3D" and it is 'not working for me.' When I open the image 'archer...' I do not get layers, but only the background image, and consequently no 3DAxis widget appears.
This is my first try at this, and I am stuck trying to figure out what is wrong.
I am running Adobe Photoshop CS4 Extended, version 11.01 on Vista, with 4GB of RAM, 500GB HD
Processor speed 2200MHz
NVIDIA GeForce 7100
Memory available to PS 3255MB
Memory used by PS 70 percent
If anybody could please point me in the right direction, I would greatly appreciate it!
christian

it can work with the Background layer just fine, go to 3d->New Shape from Layer->Cone (or whatever) and then select one of the 3D tools and it should appear. Note though that OpenGL drawing must be enabled in Edit->Preferences->Performance to be able to see it.
Using the 3D Axis: http://help.adobe.com/en_US/Photoshop/11.0/WS0FB519CE-94B2-44d0-AFBE-7227747D20B9.html

Enabling blog comments is not working for me

Similar Messages

Maybe you are looking for