Encoding of data sent to server
hello, i have problem with encoding of czech chars, all source code is utf-8 encoded, in each page i have <%@ page contentType="text/html; charset=UTF-8"%>, chars shown in page are shown correctly but if i fill some text field and send data to server so the data are not correct, it means in struts action i get not correct data from form bean
thanks a lot
There are multiple ways...Temporarily, you can turn on the RFC trace function for the RFC destination in question then view the RFC log file. You can use a log point in your custom program and switch it on or off as needed and view the log point file which contains each individual table or variable with values. Or simply, you can write the data to the spool (or an additional spool) based on a trace parameter on the selection screen.
Similar Messages
-
Unwrap not unwraping all data sent from server
java client server NIO ssl
At server end send about 50 packets are written using this method:
sendPacket(String packet)
writeBuffer = charSet.encode(packet);
c.ssl.outNetBB.clear();
c.ssl.engine.wrap(writeBuffer, c.ssl.outNetBB);
c.ssl.outNetBB.flip();
//write message to socket channel
while (c.ssl.outNetBB.hasRemaining())
socketChannel.write(c.ssl.outNetBB);
At the client end I read all these packets:
inNetBB.clear();
int bytesread = socketChannel.read(inNetBB);
inNetBB.flip();
requestBB.clear();
res = engine.unwrap(inNetBB, requestBB);
It seems like all the 50 packets are read into inNetBB 6000 bytes
But the unwrap only consumes 70 bytes and produces 100
This first 100 bytes is unencrypted correctly and corresponds exactly to one write of the 50 from the server. I dont know why.
Why am I getting only the first packet of the 50 sent??
[ Ive tried : while inNtBB.hasRemaining for repeated unwraps
but only the first packet is output still ]
TIA
pbutlerIf I'm reading this right, you're writing (wrapping) about 50 separate SSL packets, and then unwrapping just one.
Recall:
The SSLEngine produces/consumes complete SSL/TLS packets only, and
does not store application data internally between calls to wrap()/unwrap().So it looks to me like you need to keep unwrapping the rest of your 5930 bytes to get the remainder of the application data.
[ Ive tried : while inNtBB.hasRemaining for repeated unwraps
but only the first packet is output still ]Are you inadvertantly clearing the inNtBB before you call your additional unwraps?
If you have lots of small packets, you might want to consider buffering them up and wrapping them to the SSLEngine/SocketChannel all at once. You'll pay less in overhead. -
FTP in CS3 - no data sent to server
Hi, I am no nearer solving my earlier problem, but this is
just a plea to see in anyone out there has had a similar
experience...
Since Tuesday, when I uploaded some updates, things stopped
working, in strange ways, on the site. Suddenly, sometimes the
stylesheets were disregarded, pages went blank, images disappeared,
the flash stopped reading files. Today I worked out that this was
because FTP was not working - well not well anyway - it setup a
filename for every item on the server, but some items were left
with no data, though the progress bar reported things happening and
obviously the remote file list looked fine.
I have just transferred the site with an old version of
AceFTP - which all went over first time no problem... is this an
ISP problem or do I have a bug on both my laptop and my desktop -
or somewhere... This has cost me three days so far, I really need
to get things working reliably.
Any suggestion welcome.Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
http://forums.mozillazine.org/viewforum.php?f=25 <br />
You'll need to register and login to be able to post in that forum. -
Nio write problem: server data sent isn't fully read by client
Hi everyone,
still writing away with my nio server and once again have run into
some problems. Essentially my main problem is that when the server
writes to the client, the write appears to output all the bytes in the
write operation, but the client never accepts them all, even if a
buffer has been manually allocated to the correct size of the data.
As background my server will accept connections. When a connection
is established I register OP_READ on the key. When a OP_READ trigger
occurs the server accepts the clients request, processes it, then
attaches the output to the SelectionKey as a ByteBuffer that has
already been encoded. At this point I then register OP_WRITE on that
SelectionKey (as a side note i'm running this server on XP and had
read that registering OP_READ and OP_WRITE on the same selector was
bad, but then it looked like there was a work around to this) and wait
for an OP_WRITE trigger.
When an OP_WRITE occurs on that key I run a new method (with heavy
influences from the thread: http://forum.java.sun.com/thread.jsp?forum=11&thread=530825 and the taming the nio circus thread) which will grab the attachment and attempt to send it. The code has been written that IF the send cannot complete it should re-attach the remaining bytebuffer to the key and wait for another OP_WRITE to occur so it can send the remainder.
The problem is that whenever I write (and for this test the amount im writing is approx 10100 bytes) the server appears to send it all (by checking the int returned from socketchannel.write()), but at the client end it never reads all the data that is sent.
If i'm using a blocking socket client, then I get a java.net.SocketException: Connection Reset exception, whilst if i'm using a non-blocking client, I get no exception, just not the whole amount of data, even when i've statically allocated a receiving bytebuffer that is big enough.
The following code is a class that is used to do the writing from the server:
/* code for nio write model referenced from:
* http://forum.java.sun.com/thread.jsp?forum=11&thread=530825
class NIOWriteHandler {
private ByteBuffer sendBuffer;
private SelectionKey localSelectionKey;
NIOWriteHandler(SelectionKey currentKey) {
localSelectionKey = currentKey;
public void doWrite() {
localSelectionKey.interestOps(SelectionKey.OP_READ); //deselect write,
sendBuffer = (ByteBuffer)localSelectionKey.attachment();
// perform the writing
SocketChannel writingChannel = (SocketChannel)localSelectionKey.channel();
if (writingChannel.isOpen()) {
int len = 0;
if (sendBuffer.hasRemaining()) {
try {
System.out.println("Sending chunks o data");
len = writingChannel.write(sendBuffer);
System.out.println("value of len: " + len);
} catch (IOException ioe) {
ioe.printStackTrace();
// call close method
System.out.println("CLOSE INVOKED at POINT 8");
closeComplete(localSelectionKey);
System.out.println("Second IF coming...");
if (sendBuffer.hasRemaining()) {
// if we get here then the previous write did not fully
// complete, so need to save data etc
System.out.println("Couldn't send all data this time...");
localSelectionKey.interestOps(SelectionKey.OP_WRITE|SelectionKey.OP_READ);
localSelectionKey.attach(sendBuffer);
} else {
sendBuffer = null;
closeComplete(localSelectionKey);
// write complete at this stage
}This is the basic block client that is incredibly dumb:
import java.net.*;
import java.util.*;
import java.io.*;
import java.nio.charset.*;
import java.nio.channels.*;
import java.nio.*;
import java.nio.ByteBuffer;
public class ServerTest {
/* args 0 - the IP of the machine to connect to
args 1 - the port number
Simple client that connects to a specified IP & port, takes a line
of input via stdin, sends that to the connected machine and prints
out the response.
Error handling and such isn't accounted for.
public static void main (String args[]) throws Exception{
Socket socket = new Socket(args[0], Integer.parseInt(args[1]));
BufferedReader buffRead = new
BufferedReader(new InputStreamReader((socket.getInputStream())));
PrintStream ps =
new PrintStream(socket.getOutputStream());
Charset charset = Charset.forName("ISO-8859-1");
BufferedReader stdin = new BufferedReader(new InputStreamReader(System.in));
System.out.println("[CLIENT]Data to send: ");
String data = stdin.readLine();
ps.println(data);
String returned = buffRead.readLine();
while (returned != null) {
System.out.println(returned);
returned = buffRead.readLine();
System.out.println("[CLIENT]End server response");
buffRead.close();
ps.close();
socket.close();
}And here is the non-blocking basic client (which dosn't actually close at the moment):
import java.net.*;
import java.util.*;
import java.io.*;
import java.nio.charset.*;
import java.nio.channels.*;
import java.nio.*;
public class ServerTestNonBlock {
/* args 0 - the IP of the machine to connect to
args 1 - the port number
Simple client that connects to a specified IP & port, takes a line
of input via stdin, sends that to the connected machine and prints
out the response.
Error handling and such isn't accounted for.
public static void main (String args[]) throws Exception{
InetSocketAddress addr = new InetSocketAddress
(args[0], Integer.parseInt(args[1]));
SocketChannel sc = SocketChannel.open();
sc.configureBlocking(false);
Selector selector = Selector.open();
System.out.println("Starting connection...");
sc.connect(addr);
while(!sc.finishConnect()) {
System.out.println("1,2,3,4 I will keep on counting...");
System.out.println("Connection established..");
Charset charset = Charset.forName("ISO-8859-1");
CharsetEncoder encoder = charset.newEncoder();
sc.register(selector, SelectionKey.OP_READ | SelectionKey.OP_WRITE);
while (true) {
int n = selector.select();
if (n==0) {
continue;
Set keys = selector.selectedKeys();
Iterator it = keys.iterator();
while (it.hasNext()) {
SelectionKey selKey = (SelectionKey)it.next();
if (selKey.isReadable()) {
// time to setup read
ByteBuffer incomingData =
ByteBuffer.allocateDirect(102000);
incomingData.clear();
int count;
while ((count = sc.read(incomingData)) > 0) {
System.out.println("Value of count: " + count);
// reading the data
System.out.println("Count value: " + count);
int pos = incomingData.position();
incomingData.flip();
CharBuffer content = charset.decode(incomingData);
String inData = content.toString();
System.out.println(inData.trim());
System.out.println("[CLIENT]End server response");
System.out.println("Count value: " + count);
System.out.println("Position value: " + pos);
//sc.close();
//break;
if (selKey.isWritable()) {
BufferedReader stdin = new BufferedReader
(new InputStreamReader(System.in));
System.out.println("[CLIENT]Data to send: ");
String data = stdin.readLine();
ByteBuffer byteBufferOut = encoder.encode
(CharBuffer.wrap(data));
int length = sc.write(byteBufferOut);
System.out.println("Wrote: " + length + " bytes.");
selKey.interestOps(SelectionKey.OP_READ);
}I'm kinda stuck at the moment and am making change for the sake of change without getting a good grasp of what is going on. If anyone can provide any help that'd be fantastic. If in the mean time I figgure something out i'll post a response.
If you've gotten this far thanks a bunch for reading :)
Cheers,
PeteHi Meesum,
thanks for the reply :)
I'm not convinced this is the error - as i've got two clients listed there, and the odd behaviour from both is that neither is getting through to the last of the data that is sent.
If the null were the problem (which is only checked for in the basic dumb blocking client) i'd be expecting some sort of infinite loop or wait for more data from the server, not an abnormal termination (ala connection reset) from the server. I'll give it a shot anyhow, but I know that under a blocking write operation that that code worked fine.
Thanks again though for the post, has got some of my cogs slowly turning :)
Cheers,
Pete -
How to upload data from application server
Hi,
please help me out in uploading the data from application server which is a tab delemited file into an internal table.
Thanks
kumarhi,
Use this sample code as an example.
table declaration
tables: mara.
*data declaration
data: begin of it_lfa1 occurs 0,
vendor like lfa1-lifnr,
land1 like lfa1-land1,
name1 like lfa1-name1,
ort01 like lfa1-ort01,
end of it_lfa1.
selection screen
selection-screen: begin of block b1 with frame.
parameters: p_file type rlgrap-filename obligatory.
selection-screen: end of block b1.
at selection screen
at selection-screen on value-request for p_file.
*& start-of-selection
start-of-selection.
perform transfer_file using p_file.
perform write.
*& Form transfer_file
text
-->P_P_FILE text
form transfer_file using p_p_file.
data: l_message(30) type c.
***opening dataset for reading
open dataset p_p_file for input in text mode encoding default message
l_message.
if sy-subrc ne 0.
message i001(zerr2) with p_p_file.
endif.
*******transferring data from file to app server.
do.
read dataset p_p_file into it_lfa1.
if sy-subrc = 0.
append it_lfa1.
clear it_lfa1.
else.
exit.
endif.
enddo.
*******closing dataset
close dataset p_p_file.
endform. " transfer_file
*& Form write
text
--> p1 text
<-- p2 text
form write .
loop at it_lfa1.
write:/ it_lfa1-vendor,
it_lfa1-land1,
it_lfa1-name1,
it_lfa1-ort01.
endloop.
endform. " write
Thanks
Aneesh. -
How to bring the data from application server to presentation server
hi,
i have one problem,i have written the program which will open the files in the application server when we run the program in the background(sm37),the same data from application server i want to bring into presentation server in the format of (.csv),how to bring the data from application to presentation server can any body help me on this topic.folowing is the code .
*& Report ZPFA_HIER_LOAD
REPORT ZFPA_HIER_LOAD.
*---- Declaration of Oracle connectioN
DATA con_name LIKE dbcon-con_name VALUE 'COMSHARE'.
DATA: MFL1(9),MFL2(5),MFL3(9),MFL4(2),MFL5(8) TYPE c.
DATA : mfilename type string.
data: begin of matab1 occurs 0,
MFL1(9) TYPE C,
MFL2(5) TYPE C,
MFL3(9) TYPE C,
MFL4(2) TYPE C,
MFL5(8) TYPE C ,
end of matab1 .
data: setid(8) type c.
data: begin of source occurs 0,
setid(8) type c,
end of source.
*PARAMETERS : p_pfile LIKE filename-FILEEXTERN.
*PARAMETERS : m_bsenty(8). " type c obligatory.
*mfilename = P_PFILE.
EXEC SQL.
SET CONNECTION :con_name
ENDEXEC.
EXEC SQL.
CONNECT TO :con_name
ENDEXEC.
EXEC SQL PERFORMING get_source.
SELECT set_id FROM UNIT_SET INTO
:setid
ORDER BY SET_ID
ENDEXEC.
start-of-selection.
LOOP AT SOURCE.
REFRESH matab1. CLEAR matab1.
EXEC SQL PERFORMING evaluate.
SELECT TO_CHAR(MEM_ID),TRIM(TO_CHAR(MEM_PID)) FROM UNIT_TREE INTO :MFL1,
:MFL5
where set_id = :SOURCE-SETID ORDER BY MEM_ID
ENDEXEC.
if SOURCE-SETID = '80000000'.
mfilename = '/tmp/aesorg'.
elseif SOURCE-SETID = '80000006'.
mfilename = '/tmp/Consolidation_Manager'.
elseif SOURCE-SETID = '80000010'.
mfilename = '/tmp/10org'.
elseif SOURCE-SETID = '80000012'.
mfilename = '/tmp/20org'.
elseif SOURCE-SETID = '80000018'.
mfilename = '/tmp/30org'.
elseif SOURCE-SETID = '80000025'.
mfilename = '/tmp/40org'.
Endif.
mfilename = '/usr/test.dat'.
************************This was i tried***********************
open dataset mfilename for output in text mode encoding default." IN
*TEXT MODE ENCODING DEFAULT.
if sy-subrc <> 0.
exit.
endif.
close dataset mfilename.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = MFILENAME
FILETYPE = 'ASC'
TABLES
data_tab = matab1
EXCEPTIONS
file_write_error = 1
invalid_type = 2
no_authority = 3
unknown_error = 4
OTHERS = 10.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
clear matab1.
ENDLOOP.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
close dataset mfilename.
MFL5 = '0'.
CLEAR MFL5.
FORM evaluate.
if MFL5 = -1.
MFL5 = ''.
ENDIF.
concatenate MFL1 ',' into MFL1.
concatenate MFL1 ',' into MFL3.
matab1-MFL1 = MFL1.
matab1-MFL2 = 'ZBUE,'.
matab1-MFL3 = MFL3.
matab1-MFL4 = ' ,'.
matab1-MFL5 = MFL5.
append matab1 .
CLEAR MFL1.
CLEAR MFL2.
CLEAR MFL3.
CLEAR MFL4.
CLEAR MFL5.
ENDFORM.
"evaluate
*& Form GET_SOURCE
text
FORM GET_SOURCE.
source-setid = setid.
append source.
clear source.
ENDFORM. "GET_SOURCEHi Rammohan,
You cannot use OPEN DATASET to transfer data from application server to presentation server.
You can do the following :
<b>Do 1st point in BACKGROUND</b>
1. Read the data file from application server into an internal table using OPEN DATASET
<b>Do 2nd point in Foreground</b>
2. Once you get the data into an internal table, then use FM GUI_DOWNLOAD to download it on presentation server
You cannot use the above 2 point together in Background because its not possible. Hence you need program it partially in background and partially in foreground.
Best regards,
Prashant -
How can I download the data to Application Server and Network Drive
Hi Experts
I am having problem with download the data to Application Server and Network Drive in back ground. its working in foregorund but not in back ground.please suggest me . Thanks for advance.
Thanks & Regards
RaghavaHi Experts
I am using like this
P_Back is a check box on the selection-screen.
it_fihrst_out-its internal table
sy-batch -Program is running in the background
IF sy-batch IS INITIAL.
IF p_back = 'X'.
OPEN DATASET file_01 FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc = 0.
LOOP AT it_fihrst_out.
TRANSFER it_fihrst_out TO file_01.
ENDLOOP.
ENDIF.
CLOSE DATASET file_01.
CASE sy-subrc.
WHEN 0.
WRITE: / file_01, / 'successfully generated.'.
WHEN OTHERS.
WRITE: / file_01, 'Unexpected error occurred.'.
ENDCASE.
ELSE.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
filename = file_01
filetype = 'ASC'
TABLES
data_tab = it_fihrst_out
EXCEPTIONS
file_open_error = 1
file_write_error = 2
invalid_filesize = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
CASE sy-subrc.
WHEN 0.
WRITE: / file_01, / 'successfully generated.'.
WHEN 2.
WRITE: / file_01, 'Output Error: File still open'.
WHEN OTHERS.
WRITE: / file_01, 'Unexpected error occurred.'.
ENDCASE.
ENDIF.
ELSE.
LOOP AT it_fihrst_out.
WRITE:/ it_fihrst_out.
ENDLOOP.
ENDIF.
This is the code . -
Sending internal table data to application server as an XML file
Hi All,
I am trying to send the internal table data to application server which should be stored in XML format.
I am using the following code:
DATA:
result TYPE xstring.
CALL TRANSFORMATION id
SOURCE tab = p_output-xsfdata
RESULT XML result.
OPEN DATASET l_xml_full_path FOR OUTPUT IN BINARY MODE.
TRANSFER result TO l_xml_full_path.
CLOSE DATASET l_xml_full_path.
And the content in the internal table is :
3C3F786D6C2076657273696F6E3D22312E30223F3E3C736620786D6C6E733D2275726E3A736
73796D206E616D653D22534653592D44415445223E30362F31302F323030393C2F73796D3E2
50617961626C653C6E65772D6C696E652F3E50617274206F6620746865204E616D653C6E657
.......and so on
With this a file is getting created on the application server, but the data is not correct. I am getting the data something like:
<?xml version="1.0" encoding="utf-8"?>
<asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0"><asx:values><TAB><item>
PD94bWwgdmVyc2lvbj0iMS4wIj8+PHNmIHhtbG5zPSJ1cm46c2FwLWNv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==</item>
<item>c3ltIG5hbWU9IlNGU1ktREFURSI+MDYvMTAvMjAwOTwvc3ltPiA8c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 anyone tell me the reason why am I getting the data in this way?
Thanks in advance,
Swapna.
Edited by: NagaSwapna Thota on Jun 10, 2009 5:44 PMHI,
Use this FM SAP_CONVERT_TO_XML_FORMAT to convert the data to XML format and then upload the convert data from the internal table to Application server. -
Re: (forte-users) Delays in data transfer..server-to-client
I would try using DOM (distributed object manager) traces. trc:do:20 will
give you information on each messages sent from and received by the
partition. Levels are 1, 2, 5, 7, and 8, and trc:do:*:8 is very
verbose. trc:do:20:1 may tell you what you want to know. trc:do:1:1 will
give you a basic 1-line-per DOM event trace that may also be all you need.
Communications manager traces will tell you about network and socket-level
activity, but not about the sizes of the messages themselves. In addition,
the operating system makes decisions about physical packet size and
send/receive timing, so CM activities only generally map to actual network
activity.
-tdc
iPlanet Integration Server Engineering
At 09:24 AM 5/1/01 -0700, you wrote:
All,
We are experiencing delays in object transfer between server and client. The
delays are longer with large objects (a single object with an array of objects
that reflect the rows returned in a database) than small (ie: 10 rows vs 400).
Does anyone have any (actual) experience using the various Forte' flags in
order
to show the actual size of the object/packets being passed between the server
and client?
We are using input/output between client and server, input on all the SO's
within a partition. Response on the server side is good, roughly 6 seconds or
so. The round trip fare however from the time the client makes the SO call to
the time that it completes is in the 25-30 second range, leaving roughly 20-25
seconds unaccounted for. I have brought in the network guys who are
requesting
the data size and packet information. I did not see what I am looking for
using
the trc:cm:*:4 and trc:cm:*:8 flags. I will be trying the trc:cm:*:10
flag, but
Forte' indicates that this flag is very verbose, the systems group hates
it when
I use up all of THEIR disk space!
Any ideas would be appreciated as always.Jeff,
If the object you are passing does not require changes made to it in the
server partition to be returned, pass the object as copy input (pass by
value not reference). If it is necessary to pass the object as input, try
to pass only the attributes that are required to the remote partition
instead of the whole object.
Input/Output is normaly used with scalar variables. When a scalar is passed
to a remote partition, if the value is changed in that partition, the value
is not returned to the calling partition unless Input/Output is used.
Input/Output should not be used for object type parameters, if you need to
pass a reference, use Input only. If you can pass by value, use Copy Input.
You will notice a huge difference in performance changing from Input to Copy
input when passing large objects.
Hope this helps,
Travis Foote
Fortedeveloper.com Inc.
----- Original Message -----
From: "Jeff Bennett" <[email protected]>
To: <[email protected]>
Sent: Tuesday, May 01, 2001 9:24 AM
Subject: (forte-users) Delays in data transfer.. server-to-client
>
All,
We are experiencing delays in object transfer between server and client.The
delays are longer with large objects (a single object with an array ofobjects
that reflect the rows returned in a database) than small (ie: 10 rows vs400).
>
Does anyone have any (actual) experience using the various Forte' flags inorder
to show the actual size of the object/packets being passed between theserver
and client?
We are using input/output between client and server, input on all the SO's
within a partition. Response on the server side is good, roughly 6seconds or
so. The round trip fare however from the time the client makes the SOcall to
the time that it completes is in the 25-30 second range, leaving roughly20-25
seconds unaccounted for. I have brought in the network guys who arerequesting
the data size and packet information. I did not see what I am looking forusing
the trc:cm:*:4 and trc:cm:*:8 flags. I will be trying the trc:cm:*:10flag, but
Forte' indicates that this flag is very verbose, the systems group hatesit when
I use up all of THEIR disk space!
Any ideas would be appreciated as always.
-jeff
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected] -
Transfer data to Application Server
Hi All,
I need to send data to Application Server. Each record should be length 504. But i am not able to send data more than 255 characters in length in a single line.
Is there any way to send more than 255 characters in a single record(single line) to the Application server.
Thanks
ArunApplication Server File will be stored upto the maximum length,
but we can not view the length more than 255 charecters
OPEN DATASET outfile_fcsr FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
LOOP AT t_zdlqran3.
TRANSFER t_zdlqran3 TO outfile_fcsr LENGTH 700.
ENDLOOP.
CLOSE DATASET outfile_fcsr. -
Need Sample code to upload the data to Application Server
Hi ,
I need to upload the data to application server.
The output should be an XML file.
Can anybody send me sample code for this.
Reward points are assured.
Best Regards
Bhagat.may be this code wil help ,first to downjload the XML fine -
1)
REPORT zhr_test2_tk.
TYPE-POOLS: ixml.
TYPES: BEGIN OF xml_line,
data(256) TYPE x,
END OF xml_line.
DATA: l_ixml TYPE REF TO if_ixml,
l_streamfactory TYPE REF TO if_ixml_stream_factory,
l_ostream TYPE REF TO if_ixml_ostream,
l_renderer TYPE REF TO if_ixml_renderer,
l_document TYPE REF TO if_ixml_document.
DATA: l_element_position TYPE REF TO if_ixml_element,
l_element_title TYPE REF TO if_ixml_element,
l_element_flight TYPE REF TO if_ixml_element,
l_element_from TYPE REF TO if_ixml_element,
l_element_to TYPE REF TO if_ixml_element,
l_element_dummy TYPE REF TO if_ixml_element,
l_value TYPE string.
DATA: l_xml_table TYPE TABLE OF xml_line,
l_xml_size TYPE i,
l_rc TYPE i.
DATA: lt_erec TYPE TABLE OF hrp5126,
l_erec TYPE hrp5126.
DATA: date(10),
time(4),
filepath TYPE string.
CONSTANTS: filedir TYPE string VALUE 'C:\tmp\',
filename TYPE string VALUE 'ZHR_test'.
START-OF-SELECTION.
fill internal table
SELECT * FROM hrp5126 INTO TABLE lt_erec.
Start filling xml DOM object from internal table lt_erec.
LOOP AT lt_erec INTO l_erec.
*Create the root node 'position'
IF sy-tabix EQ 1.
create an ixml factory
l_ixml = cl_ixml=>create( ).
create Document Object Model
l_document = l_ixml->create_document( ).
Fill root node with value 'position'
l_element_position = l_document->create_simple_element(
name = 'position'
parent = l_document ).
ENDIF.
IF sy-tabix GT 1.
create element jobtitle as child of position
l_value = l_erec-jobtitle.
l_element_title = l_document->create_simple_element(
name = 'job_title'
parent = l_element_position
value = l_value ).
l_value = l_erec-empl_start_date.
l_element_dummy = l_document->create_simple_element(
name = 'StartDate'
parent = l_element_title
value = l_value ).
l_value = l_erec-empl_end_date.
l_element_dummy = l_document->create_simple_element(
name = 'EndDate'
parent = l_element_title
value = l_value ).
ENDIF.
ENDLOOP.
IF sy-subrc NE 0.
WRITE: 'No data in table hrp5125'.
ENDIF.
create a stream factory
l_streamfactory = l_ixml->create_stream_factory( ).
connect internal XML table to streamfactory
l_ostream = l_streamfactory->create_ostream_itable(
table = l_xml_table ).
render the document
l_renderer = l_ixml->create_renderer( ostream = l_ostream
document = l_document ).
l_rc = l_renderer->render( ).
Get time and date
WRITE sy-uzeit2(2) TO time2(2).
WRITE sy-uzeit0(2) TO time0(2).
WRITE sy-datum4(2) TO date0(2).
WRITE sy-datum6(2) TO date2(2).
WRITE sy-datum0(4) TO date4(4).
*Build filename with date and time reference
CONCATENATE filedir filename date time '.xml' INTO filepath.
<i>* This is the code I hope to modify in order to save the xml structure on the application server, with a specified filepath.</i>
<b> OPEN DATASET filepath FOR OUTPUT IN BINARY MODE.
LOOP AT lt_erec into l_erec.
TRANSFER l_erec TO filepath.
ENDLOOP.
CLOSE DATASET filepath.</b>
save XML document
l_xml_size = l_ostream->get_num_written_raw( ).
*This is the code for download to local computer
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
bin_filesize = l_xml_size
filename = filepath
filetype = 'BIN'
CHANGING
data_tab = l_xml_table
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
2) uploading tht PC XML file to APPliaction server -
DATA rec like QISRS_XML_LINE.
OPEN DATASET filepath FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
LOOP AT l_xml_table into rec.
TRANSFER rec TO filepath.
ENDLOOP.
CLOSE DATASET filepath. -
Date Sent not showing in Sent Mail
After a certain date, using Mail application, the Date (sent) is not showing in the header along with To & From & Subject. Why?
I have tried to get it to show using view prefs. Doesn't work.
I have changed to using a network time server. Doesn't work.
I've tried moving it to another folder. Doesn't work.
I need the date to show so when I print, I have proof of date and time sent...
Anyone?Not sure about the time stamp problem, but the missing "Sent" mails problem is not uncommon. This problem is one that a lot of people have and in my opinion, I think it's a problem with Apple's mail application, nothing at the user's end.
Does this happen only when you include an attachment or does that matter? Also, does it only happen when your outgoing message is delayed a bit? Check your junk/spam folder to see if your sent messages went in there.
This doesn't fix anything, but you might change your e-mail settings so that all new mails are automatically sent Bcc to yourself.
Sometimes the "missing" sent mails are not going in the right folder. I'm sure you probably already know, but in the left-hand column in MAIL, under Mailboxes, there is a second "sent" folder way at the bottom, depending on your other e-mail accounts, such as Yahoo or Gmail). Many people have discovered their missing "sent" e-mails in those.
It is a big hassle, for sure, and has been officially reported. Users with complaints are being told that Apple's Intrusion Detection and Prevention (IDP) systems block the connection from a user's e-mail client when it attempts to store outgoing e-mails, which contain attachments, to the users' sent folder.
This is supposedly due to the Mac OS/Mac Mail sending non-standard or erroneous commands to the server, emulating the activity which would be generated by an attacker attempting to abuse an exploit in the IMAP server. I doubt you are doing anything wrong, so it's just a matter of waiting for them to FIX this annoying issue. -
Error when passing data from app server...
Hello Experts,
I am encountering an error when trying to pass data from application server
to my internal table. Below is the error:
"You cannot convert the character set"
Hope you can help me guys.Thank you and take care!Hi ,
ABAP code for uploading a TAB delimited file into an internal table. See code below for structures. The code is base on uploading a simple txt file.
REPORT zuploadtab .
PARAMETERS: p_infile LIKE rlgrap-filename
OBLIGATORY DEFAULT '/usr/sap/'..
DATA: ld_file LIKE rlgrap-filename.
*Internal tabe to store upload data
TYPES: BEGIN OF t_record,
name1 like pa0002-VORNA,
name2 like pa0002-name2,
age type i,
END OF t_record.
DATA: it_record TYPE STANDARD TABLE OF t_record INITIAL SIZE 0,
wa_record TYPE t_record.
*Text version of data table
TYPES: begin of t_uploadtxt,
name1(10) type c,
name2(15) type c,
age(5) type c,
end of t_uploadtxt.
DATA: wa_uploadtxt TYPE t_uploadtxt.
*String value to data in initially.
DATA: wa_string(255) type c.
constants: con_tab TYPE x VALUE '09'.
*If you have Unicode check active in program attributes then you will
*need to declare constants as follows:
*class cl_abap_char_utilities definition load.
*constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB.
*START-OF-SELECTION
START-OF-SELECTION.
ld_file = p_infile.
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
ELSE.
DO.
CLEAR: wa_string, wa_uploadtxt.
READ DATASET ld_file INTO wa_string.
IF sy-subrc NE 0.
EXIT.
ELSE.
SPLIT wa_string AT con_tab INTO wa_uploadtxt-name1
wa_uploadtxt-name2
wa_uploadtxt-age.
MOVE-CORRESPONDING wa_uploadtxt TO wa_upload.
APPEND wa_upload TO it_record.
ENDIF.
ENDDO.
CLOSE DATASET ld_file.
ENDIF.
*END-OF-SELECTION
END-OF-SELECTION.
*!! Text data is now contained within the internal table IT_RECORD
Display report data for illustration purposes
loop at it_record into wa_record.
write:/ sy-vline,
(10) wa_record-name1, sy-vline,
(10) wa_record-name2, sy-vline,
(10) wa_record-age, sy-vline.
endloop.
Reward points if it is usefull ..
Girish -
Uploading the data to application server
Hi,
I have created a report.In the selection screen I have created 2 check boxes(screen,server).If I click on the screen check box the o/p should be displayed on the screen.If I click on the server checkbox the o/p should be sent to the application server.How can I send the data to application server?
Regards,
HemaHi Hema,
Since the location that you have mentioned is some outside the systema nd no the Application Server,this third party location can be done only when there is some other T-code that has been integrated with the system.
If in case,you want to send the data to the Presentation server when you clikc on the Checkbox for it, and else,it should save it on the Applicaton server ,the code is mentioned below:
*& Report ZHYPERION *
*& Project : SubSea7
Created on : 07/02/2007
Created by : Puneet Jhari.
*& Purpose : For SAP Interface download Hyperion.
REPORT zhyperion NO STANDARD PAGE HEADING MESSAGE-ID zhyper.
Start of Data Declaration
TYPE-POOLS : truxs,vrm.
TABLES : glpct,cepc.
DATA : var TYPE i,
total TYPE f.
DATA : BEGIN OF wa2,
ryear LIKE glpct-ryear,
rbukrs LIKE glpct-rbukrs,
racct LIKE glpct-racct,
ksl01 LIKE glpct-ksl01,
END OF wa2.
DATA : BEGIN OF wa3,
ryear LIKE glpct-ryear,
rbukrs LIKE glpct-rbukrs,
racct LIKE glpct-racct,
ksl01 LIKE glpct-ksl01,
END OF wa3.
DATA : BEGIN OF wa4,
racct LIKE glpct-racct,
END OF wa4.
DATA : BEGIN OF wa5,
rbukrs LIKE glpct-rbukrs,
racct LIKE glpct-racct,
total1(8) TYPE p DECIMALS 2,
END OF wa5.
DATA : BEGIN OF wa9,
khinr LIKE cepc-khinr,
racct LIKE glpct-racct,
total1(8) TYPE p DECIMALS 2,
END OF wa9.
DATA : BEGIN OF wa6,
khinr LIKE cepc-khinr,
prctr LIKE cepc-prctr,
rprctr LIKE glpct-rprctr,
ryear LIKE glpct-ryear,
rbukrs LIKE glpct-rbukrs,
racct LIKE glpct-racct,
ksl01 LIKE glpct-ksl01,
END OF wa6.
DATA : BEGIN OF wa7,
khinr LIKE cepc-khinr,
prctr LIKE cepc-prctr,
rprctr LIKE glpct-rprctr,
ryear LIKE glpct-ryear,
rbukrs LIKE glpct-rbukrs,
racct LIKE glpct-racct,
ksl01 LIKE glpct-ksl01,
END OF wa7.
DATA : itab3 LIKE TABLE OF wa2,
itab4 LIKE TABLE OF wa3,
itab5 LIKE TABLE OF wa4 WITH HEADER LINE,
itab6 LIKE TABLE OF wa5 WITH HEADER LINE,
itab7 LIKE TABLE OF wa6,
itab8 LIKE TABLE OF wa7,
itab10 LIKE TABLE OF wa9.
DATA : flag(1) TYPE c,
temp(6) TYPE c.
DATA : itab2 TYPE truxs_t_text_data,
itab9 TYPE truxs_t_text_data WITH HEADER LINE.
DATA : name TYPE vrm_id,
list TYPE vrm_values,
value LIKE LINE OF list,
FILNAM11 TYPE STRING,
FILNAM21 TYPE STRING.
End of Data Declaration
Begin of Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: r1 DEFAULT 'X' RADIOBUTTON GROUP g1 USER-COMMAND rad1,
r2 RADIOBUTTON GROUP g1 .
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-005.
PARAMETERS: rbukrs1 TYPE glpct-rbukrs MODIF ID ful,
khinr1 TYPE cepc-khinr AS LISTBOX VISIBLE LENGTH 20
MODIF ID sam ,
ryear1 TYPE glpct-ryear MODIF ID ful,
ryear2 TYPE glpct-ryear MODIF ID sam,
rpmax1 TYPE i MODIF ID ful,
rpmax2 TYPE i MODIF ID sam,
filnam1 TYPE rlgrap-filename MODIF ID ful,
filnam2 TYPE RLGRAP-FILENAME MODIF ID sam.
SELECTION-SCREEN END OF BLOCK b3.
End of Selection Screen
AT SELECTION-SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
PERFORM populate. "For populating the drop-down list.
CLEAR VALUE.
REFRESH LIST.
NAME = 'KHINR1'.
VALUE-KEY = '1S7_NOCASV'.
VALUE-TEXT = '1S7_NOCASV'.
APPEND VALUE TO LIST.
VALUE-KEY = '1S7_NOCJOT'.
VALUE-TEXT = '1S7_NOCJOT'.
APPEND VALUE TO LIST.
LOOP AT SCREEN. "For toggling between the selection screens.
IF r1 EQ 'X'.
IF screen-group1 = 'SAM'.
screen-active = 0.
ENDIF.
ELSEIF r2 EQ 'X'.
IF screen-group1 = 'FUL'.
screen-active = 0.
ENDIF.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
For the Drop-Down Listbox
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = name
values = list
EXCEPTIONS
ID_ILLEGAL_NAME = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Begin of Data Selection
START-OF-SELECTION.
When Company Code radio button is selected.
IF r1 EQ 'X'. "If Company Code radio button is selected.
IF rbukrs1 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
IF rpmax1 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
IF ryear1 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
IF filnam1 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
MOVE FILNAM1 TO FILNAM11.
CASE rpmax1.
WHEN '01'.
SELECT ryear rbukrs racct ksl01
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '02'.
SELECT ryear rbukrs racct ksl02
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '03'.
SELECT ryear rbukrs racct ksl03
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '04'.
SELECT ryear rbukrs racct ksl04
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '05'.
SELECT ryear rbukrs racct ksl05
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '06'.
SELECT ryear rbukrs racct ksl06
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '07'.
SELECT ryear rbukrs racct ksl07
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '08'.
SELECT ryear rbukrs racct ksl08
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '09'.
SELECT ryear rbukrs racct ksl09
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '10'.
SELECT ryear rbukrs racct ksl10
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '11'.
SELECT ryear rbukrs racct ksl11
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '12'.
SELECT ryear rbukrs racct ksl12
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '13'.
SELECT ryear rbukrs racct ksl13
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '14'.
SELECT ryear rbukrs racct ksl14
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '15'.
SELECT ryear rbukrs racct ksl15
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '16'.
SELECT ryear rbukrs racct ksl16
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
ENDCASE.
MOVE itab3 TO itab4.
LOOP AT itab3 INTO wa2.
flag = 0.
LOOP AT itab5 INTO wa4.
IF wa2-racct EQ wa4-racct.
flag = 1.
EXIT.
ENDIF.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM itab5.
IF flag = 1.
CONTINUE.
ENDIF.
LOOP AT itab4 INTO wa3.
IF wa2-rbukrs EQ wa3-rbukrs AND wa2-racct EQ wa3-racct AND
wa2-ryear EQ wa3-ryear.
total = total + wa3-ksl01.
ENDIF.
ENDLOOP.
wa5-rbukrs = wa2-rbukrs.
wa5-racct = wa2-racct+4(6).
wa5-total1 = total.
APPEND wa5 TO itab6.
CLEAR total.
APPEND wa2-racct TO itab5.
ENDLOOP.
If no data is available corresponding to the values entered.
IF itab6[] IS INITIAL.
MESSAGE i003.
ENDIF.
For making the file Comma separated
CALL FUNCTION 'SAP_CONVERT_TO_TEX_FORMAT'
EXPORTING
i_field_seperator = ','
I_LINE_HEADER =
I_FILENAME =
I_APPL_KEEP = ' '
TABLES
i_tab_sap_data = itab6
CHANGING
i_tab_converted_data = itab2
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
For downloading it to the Presentation Server
MOVE itab2[] TO itab9[].
OPEN DATASET filnam1 FOR OUTPUT IN LEGACY TEXT MODE.
LOOP AT itab9.
TRANSFER itab9 TO filnam1.
ENDLOOP.
CLOSE DATASET filnam1.
IF sy-subrc EQ 0.
MESSAGE s004.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = FILNAM11
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
WRITE_LF_AFTER_LAST_LINE = ABAP_TRUE
IMPORTING
FILELENGTH =
tables
data_tab = itab2
FIELDNAMES =
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF sy-subrc eq 0.
message s004.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
When Region radio button is selected.
ELSEIF r2 EQ 'X'.
IF khinr1 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
IF rpmax2 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
IF ryear2 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
IF filnam2 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
MOVE FILNAM2 TO FILNAM21.
CASE rpmax2.
WHEN '01'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl01
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '02'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl02
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '03'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl03
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '04'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl04
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '05'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl05
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '06'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl06
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '07'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl07
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '08'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl08
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '09'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl09
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '10'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl10
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '11'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl11
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '12'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl12
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '13'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl13
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '14'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl14
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '15'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl15
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '16'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl16
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
ENDCASE.
MOVE itab7 TO itab8.
LOOP AT itab7 INTO wa6.
flag = 0.
LOOP AT itab5 INTO wa4.
IF wa6-racct EQ wa4-racct.
flag = 1.
EXIT.
ENDIF.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM itab5.
IF flag = 1.
CONTINUE.
ENDIF.
LOOP AT itab8 INTO wa7.
IF wa6-rbukrs EQ wa7-rbukrs AND wa6-racct EQ wa7-racct AND
wa6-ryear EQ wa7-ryear.
total = total + wa7-ksl01.
ENDIF.
ENDLOOP.
wa9-khinr = khinr1.
wa9-racct = wa6-racct+4(6).
wa9-total1 = total.
APPEND wa9 TO itab10.
CLEAR total.
APPEND wa6-racct TO itab5.
ENDLOOP.
*If no data is available corresponding to the values entered.
IF itab10 IS INITIAL.
MESSAGE i003.
ENDIF.
For making the file Comma separated
CALL FUNCTION 'SAP_CONVERT_TO_TEX_FORMAT'
EXPORTING
i_field_seperator = ','
I_LINE_HEADER =
I_FILENAME =
I_APPL_KEEP = ' '
TABLES
i_tab_sap_data = itab10
CHANGING
i_tab_converted_data = itab2
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
For downloading it to the Presentation Server
MOVE itab2[] TO itab9[].
OPEN DATASET filnam2 FOR OUTPUT IN LEGACY TEXT MODE.
LOOP AT itab9.
TRANSFER itab9 TO filnam2.
ENDLOOP.
CLOSE DATASET filnam2.
IF sy-subrc EQ 0.
MESSAGE s004.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = FILNAM21
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
WRITE_LF_AFTER_LAST_LINE = ABAP_TRUE
IMPORTING
FILELENGTH =
tables
data_tab = itab2
FIELDNAMES =
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF sy-subrc eq 0.
message s004.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
*& Form POPULATE
text
FORM populate.
CLEAR value.
REFRESH list.
name = 'KHINR1'.
value-key = '1S7_SUBSEA'.
value-text = '1S7_SUBSEA'.
APPEND value TO list.
value-key = '1S7_GEN'.
value-text = '1S7_GEN'.
APPEND value TO list.
value-key = '1S7'.
value-text = '1S7'.
APPEND value TO list.
value-key = '1S7_CORPTP'.
value-text = '1S7_CORPTP'.
APPEND value TO list.
value-key = '1S7_BRRE'.
value-text = '1S7_BRRE'.
APPEND value TO list.
value-key = '1S7_BRCON'.
value-text = '1S7_BRCON'.
APPEND value TO list.
value-key = '1S7_BRCJOB'.
value-text = '1S7_BRCJOB'.
APPEND value TO list.
value-key = '1S7_BRCJBU'.
value-text = '1S7_BRCJBU'.
APPEND value TO list.
value-key = '1S7_BRCJCO'.
value-text = '1S7_BRCJCO'.
APPEND value TO list.
value-key = '1S7_BRCJIR'.
value-text = '1S7_BRCJIR'.
APPEND value TO list.
value-key = '1S7_BRCJEN'.
value-text = '1S7_BRCJEN'.
APPEND value TO list.
value-key = '1S7_BRCJPI'.
value-text = '1S7_BRCJPI'.
APPEND value TO list.
value-key = '1S7_BRCJSU'.
value-text = '1S7_BRCJSU'.
APPEND value TO list.
value-key = '1S7_BRCJFL'.
value-text = '1S7_BRCJFL'.
APPEND value TO list.
value-key = '1S7_BRCJOT'.
value-text = '1S7_BRCJOT'.
APPEND value TO list.
value-key = '1S7_BRCASV'.
value-text = '1S7_BRCASV'.
APPEND value TO list.
value-key = '1S7_BRCASE'.
value-text = '1S7_BRCASE'.
APPEND value TO list.
value-key = '1S7_BRCOOC'.
value-text = '1S7_BRCOOC'.
APPEND value TO list.
value-key = '1S7_BRCOHD'.
value-text = '1S7_BRCOHD'.
APPEND value TO list.
value-key = '1S7_BRCGEN'.
value-text = '1S7_BRCGEN'.
APPEND value TO list.
value-key = '1S7_BRDRI'.
value-text = '1S7_BRDRI'.
APPEND value TO list.
value-key = '1S7_BRDJOB'.
value-text = '1S7_BRDJOB'.
APPEND value TO list.
value-key = '1S7_BRDASV'.
value-text = '1S7_BRDASV'.
APPEND value TO list.
value-key = '1S7_BRDASE'.
value-text = '1S7_BRDASE'.
APPEND value TO list.
value-key = '1S7_BRDAEW'.
value-text = '1S7_BRDAEW'.
APPEND value TO list.
value-key = '1S7_BRDAEO'.
value-text = '1S7_BRDAEO'.
APPEND value TO list.
value-key = '1S7_BRDAET'.
value-text = '1S7_BRDAET'.
APPEND value TO list.
value-key = '1S7_BRDOOC'.
value-text = '1S7_BRDOOC'.
APPEND value TO list.
value-key = '1S7_BRDOHD'.
value-text = '1S7_BRDOHD'.
APPEND value TO list.
value-key = '1S7_BRVER'.
value-text = '1S7_BRVER'.
APPEND value TO list.
value-key = '1S7_BRVJOB'.
value-text = '1S7_BRVJOB'.
APPEND value TO list.
value-key = '1S7_BRVASV'.
value-text = '1S7_BRVASV'.
APPEND value TO list.
value-key = '1S7_BRVASE'.
value-text = '1S7_BRVASE'.
APPEND value TO list.
value-key = '1S7_BRVOOC'.
value-text = '1S7_BRVOOC'.
APPEND value TO list.
value-key = '1S7_BRVOHD'.
value-text = '1S7_BRVOHD'.
APPEND value TO list.
value-key = '1S7_UKRE'.
value-text = '1S7_UKRE'.
APPEND value TO list.
value-key = '1S7_UKCON'.
value-text = '1S7_UKCON'.
APPEND value TO list.
value-key = '1S7_UKCJOB'.
value-text = '1S7_UKCJOB'.
APPEND value TO list.
value-key = '1S7_UKCJBU'.
value-text = '1S7_UKCJBU'.
APPEND value TO list.
value-key = '1S7_UKCJCO'.
value-text = '1S7_UKCJCO'.
APPEND value TO list.
value-key = '1S7_UKCJIR'.
value-text = '1S7_UKCJIR'.
APPEND value TO list.
value-key = '1S7_UKCJEN'.
value-text = '1S7_UKCJEN'.
APPEND value TO list.
value-key = '1S7_UKCJPI'.
value-text = '1S7_UKCJPI'.
APPEND value TO list.
value-key = '1S7_UKCJSU'.
value-text = '1S7_UKCJSU'.
APPEND value TO list.
value-key = '1S7_UKCJFL'.
value-text = '1S7_UKCJFL'.
APPEND value TO list.
value-key = '1S7_UKCJOT'.
value-text = '1S7_UKCJOT'.
APPEND value TO list.
value-key = '1S7_UKCASV'.
value-text = '1S7_UKCASV'.
APPEND value TO list.
value-key = '1S7_UKCASE'.
value-text = '1S7_UKCASE'.
APPEND value TO list.
value-key = '1S7_UKCOOC'.
value-text = '1S7_UKCOOC'.
APPEND value TO list.
value-key = '1S7_UKBA'.
value-text = '1S7_UKBA'.
APPEND value TO list.
value-key = '1S7_UKBATE'.
value-text = '1S7_UKBATE'.
APPEND value TO list.
value-key = '1S7_UKCOHD'.
value-text = '1S7_UKCOHD'.
APPEND value TO list.
value-key = '1S7_UKCGEN'.
value-text = '1S7_UKCGEN'.
APPEND value TO list.
value-key = '1S7_UKDRI'.
value-text = '1S7_UKDRI'.
APPEND value TO list.
value-key = '1S7_UKDJOB'.
value-text = '1S7_UKDJOB'.
APPEND value TO list.
value-key = '1S7_UKDASV'.
value-text = '1S7_UKDASV'.
APPEND value TO list.
value-key = '1S7_UKDASE'.
value-text = '1S7_UKDASE'.
APPEND value TO list.
value-key = '1S7_UKDAEW'.
value-text = '1S7_UKDAEW'.
APPEND value TO list.
value-key = '1S7_UKDAEO'.
value-text = '1S7_UKDAEO'.
APPEND value TO list.
value-key = '1S7_UKDAET'.
value-text = '1S7_UKDAET'.
APPEND value TO list.
value-key = '1S7_UKDOOC'.
value-text = '1S7_UKDOOC'.
APPEND value TO list.
value-key = '1S7_UKDOHD'.
value-text = '1S7_UKDOHD'.
APPEND value TO list.
value-key = '1S7_UKVER'.
value-text = '1S7_UKVER'.
APPEND value TO list.
value-key = '1S7_UKVJOB'.
value-text = '1S7_UKVJOB'.
APPEND value TO list.
value-key = '1S7_UKVASV'.
value-text = '1S7_UKVASV'.
APPEND value TO list.
value-key = '1S7_UKVASE'.
value-text = '1S7_UKVASE'.
APPEND value TO list.
value-key = '1S7_UKVOOC'.
value-text = '1S7_UKVOOC'.
APPEND value TO list.
value-key = '1S7_UKVOHD'.
value-text = '1S7_UKVOHD'.
APPEND value TO list.
value-key = '1S7_NORE'.
value-text = '1S7_NORE'.
APPEND value TO list.
value-key = '1S7_NOCON'.
value-text = '1S7_NOCON'.
APPEND value TO list.
value-key = '1S7_NOCJOB'.
value-text = '1S7_NOCJOB'.
APPEND value TO list.
value-key = '1S7_NOCJBU'.
value-text = '1S7_NOCJBU'.
APPEND value TO list.
value-key = '1S7_NOCJCO'.
value-text = '1S7_NOCJCO'.
APPEND value TO list.
value-key = '1S7_NOCJIR'.
value-text = '1S7_NOCJIR'.
APPEND value TO list.
value-key = '1S7_NOCJEN'.
value-text = '1S7_NOCJEN'.
APPEND value TO list.
value-key = '1S7_NOCJPI'.
value-text = '1S7_NOCJPI'.
APPEND value TO list.
value-key = '1S7_NOCJSU'.
value-text = '1S7_NOCJSU'.
APPEND value TO list.
value-key = '1S7_NOCJFL'.
value-text = '1S7_NOCJFL'.
APPEND value TO list.
value-key = '1S7_NOCJOT'.
value-text = '1S7_NOCJOT'.
APPEND value TO list.
value-key = '1S7_NOCASV'.
value-text = '1S7_NOCASV'.
APPEND value TO list.
value-key = '1S7_NOCASE'.
value-text = '1S7_NOCASE'.
APPEND value TO list.
value-key = '1S7_NOCOOC'.
value-text = '1S7_NOCOOC'.
APPEND value TO list.
value-key = '1S7_NOCOHD'.
value-text = '1S7_NOCOHD'.
APPEND value TO list.
value-key = '1S7_NOCGEN'.
value-text = '1S7_NOCGEN'.
APPEND value TO list.
value-key = '1S7_NODRI'.
value-text = '1S7_NODRI'.
APPEND value TO list.
value-key = '1S7_NODJOB'.
value-text = '1S7_NODJOB'.
APPEND value TO list.
value-key = '1S7_NODASV'.
value-text = '1S7_NODASV'.
APPEND value TO list.
value-key = '1S7_NODASE'.
value-text = '1S7_NODASE'.
APPEND value TO list.
value-key = '1S7_NODAEW'.
value-text = '1S7_NODAEW'.
APPEND value TO list.
value-key = '1S7_NODAEO'.
value-text = '1S7_NODAEO'.
APPEND value TO list.
value-key = '1S7_NODAET'.
value-text = '1S7_NODAET'.
APPEND value TO list.
value-key = '1S7_NODOOC'.
value-text = '1S7_NODOOC'.
APPEND value TO list.
value-key = '1S7_NODOHD'.
value-text = '1S7_NODOHD'.
APPEND value TO list.
value-key = '1S7_NOVER'.
value-text = '1S7_NOVER'.
APPEND value TO list.
value-key = '1S7_NOVJOB'.
value-text = '1S7_NOVJOB'.
APPEND value TO list.
value-key = '1S7_NOVASV'.
value-text = '1S7_NOVASV'.
APPEND value TO list.
value-key = '1S7_NOVASE'.
value-text = '1S7_NOVASE'.
APPEND value TO list.
value-key = '1S7_NOVOOC'.
value-text = '1S7_NOVOOC'.
APPEND value TO list.
value-key = '1S7_NOVOHD'.
value-text = '1S7_NOVOHD'.
APPEND value TO list.
value-key = '1S7_GORE'.
value-text = '1S7_GORE'.
APPEND value TO list.
value-key = '1S7_GOCON'.
value-text = '1S7_GOCON'.
APPEND value TO list.
value-key = '1S7_GOCJOB'.
value-text = '1S7_GOCJOB'.
APPEND value TO list.
value-key = '1S7_GOCJBU'.
value-text = '1S7_GOCJBU'.
APPEND value TO list.
value-key = '1S7_GOCJCO'.
value-text = '1S7_GOCJCO'.
APPEND value TO list.
value-key = '1S7_GOCJIR'.
value-text = '1S7_GOCJIR'.
APPEND value TO list.
value-key = '1S7_GOCJEN'.
value-text = '1S7_GOCJEN'.
APPEND value TO list.
value-key = '1S7_GOCJPI'.
value-text = '1S7_GOCJPI'.
APPEND value TO list.
value-key = '1S7_GOCJSU'.
value-text = '1S7_GOCJSU'.
APPEND value TO list.
value-key = '1S7_GOCJFL'.
value-text = '1S7_GOCJFL'.
APPEND value TO list.
value-key = '1S7_GOCJOT'.
value-text = '1S7_GOCJOT'.
APPEND value TO list.
value-key = '1S7_GOCASV'.
value-text = '1S7_GOCASV'.
APPEND value TO list.
value-key = '1S7_GOCASE'.
value-text = '1S7_GOCASE'.
APPEND value TO list.
value-key = '1S7_GOCOOC'.
value-text = '1S7_GOCOOC'.
APPEND value TO list.
value-key = '1S7_GOCOHD'.
value-text = '1S7_GOCOHD'.
APPEND value TO list.
value-key = '1S7_GOCGEN'.
value-text = '1S7_GOCGEN'.
APPEND value TO list.
value-key = '1S7_GODRI'.
value-text = '1S7_GODRI'.
APPEND value TO list.
value-key = '1S7_GODJOB'.
value-text = '1S7_GODJOB'.
APPEND value TO list.
value-key = '1S7_GODASV'.
value-text = '1S7_GODASV'.
APPEND value TO list.
value-key = '1S7_GODASE'.
value-text = '1S7_GODASE'.
APPEND value TO list.
value-key = '1S7_GODAEW'.
value-text = '1S7_GODAEW'.
APPEND value TO list.
value-key = '1S7_GODAEO'.
value-text = '1S7_GODAEO'.
APPEND value TO list.
value-key = '1S7_GODAET'.
value-text = '1S7_GODAET'.
APPEND value TO list.
value-key = '1S7_GODOOC'.
value-text = '1S7_GODOOC'.
APPEND value TO list.
value-key = '1S7_GODOHD'.
value-text = '1S7_GODOHD'.
APPEND value TO list.
value-key = '1S7_GOVER'.
value-text = '1S7_GOVER'.
APPEND value TO list.
value-key = '1S7_GOVJOB'.
value-text = '1S7_GOVJOB'.
APPEND value TO list.
value-key = '1S7_GOVASV'.
value-text = '1S7_GOVASV'.
APPEND value TO list.
value-key = '1S7_GOVASE'.
value-text = '1S7_GOVASE'.
APPEND value TO list.
value-key = '1S7_GOVOOC'.
value-text = '1S7_GOVOOC'.
APPEND value TO list.
value-key = '1S7_GOVOHD'.
value-text = '1S7_GOVOHD'.
APPEND value TO list.
value-key = '1S7_GVRE'.
value-text = '1S7_GVRE'.
APPEND value TO list.
value-key = '1S7_GVCON'.
value-text = '1S7_GVCON'.
APPEND value TO list.
value-key = '1S7_GVCJOB'.
value-text = '1S7_GVCJOB'.
APPEND value TO list.
value-key = '1S7_GVCJBU'.
value-text = '1S7_GVCJBU'.
APPEND value TO list.
value-key = '1S7_GVCJCO'.
value-text = '1S7_GVCJCO'.
APPEND value TO list.
value-key = '1S7_GVCJIR'.
value-text = '1S7_GVCJIR'.
APPEND value TO list.
value-key = '1S7_GVCJEN'.
value-text = '1S7_GVCJEN'.
APPEND value TO list.
value-key = '1S7_GVCJPI'.
value-text = '1S7_GVCJPI'.
APPEND value TO list.
value-key = '1S7_GVCJSU'.
value-text = '1S7_GVCJSU'.
APPEND value TO list.
value-key = '1S7_GVCJFL'.
value-text = '1S7_GVCJFL'.
APPEND value TO list.
value-key = '1S7_GVCJOT'.
value-text = '1S7_GVCJOT'.
APPEND value TO list.
value-key = '1S7_GVCASV'.
value-text = '1S7_GVCASV'.
APPEND value TO list.
value-key = '1S7_GVCASE'.
value-text = '1S7_GVCASE'.
APPEND value TO list.
value-key = '1S7_GVCOOC'.
value-text = '1S7_GVCOOC'.
APPEND value TO list.
value-key = '1S7_GVCOHD'.
value-text = '1S7_GVCOHD'.
APPEND value TO list.
value-key = '1S7_GVCGEN'.
value-text = '1S7_GVCGEN'.
APPEND value TO list.
value-key = '1S7_GVDRI'.
value-text = '1S7_GVDRI'.
APPEND value TO list.
value-key = '1S7_GVDJOB'.
value-text = '1S7_GVDJOB'.
APPEND value TO list.
value-key = '1S7_GVDASV'.
value-text = '1S7_GVDASV'.
APPEND value TO list.
value-key = '1S7_GVDASE'.
value-text = '1S7_GVDASE'.
APPEND value TO list.
value-key = '1S7_GVDOOC'.
value-text = '1S7_GVDOOC'.
APPEND value TO list.
value-key = '1S7_GVDOHD'.
value-text = '1S7_GVDOHD'.
APPEND value TO list.
value-key = '1S7_GVVER'.
value-text = '1S7_GVVER'.
APPEND value TO list.
value-key = '1S7_GVVJOB'.
value-text = '1S7_GVVJOB'.
APPEND value TO list.
value-key = '1S7_GVVASV'.
value-text = '1S7_GVVASV'.
APPEND value TO list.
value-key = '1S7_GVVASE'.
value-text = '1S7_GVVASE'.
APPEND value TO list.
value-key = '1S7_GVVOOC'.
value-text = '1S7_GVVOOC'.
APPEND value TO list.
value-key = '1S7_GVVOHD'.
value-text = '1S7_GVVOHD'.
APPEND value TO list.
value-key = '1S7_GCRE'.
value-text = '1S7_GCRE'.
APPEND value TO list.
value-key = '1S7_GCCON'.
value-text = '1S7_GCCON'.
APPEND value TO list.
value-key = '1S7_GCCJOB'.
value-text = '1S7_GCCJOB'.
APPEND value TO list.
value-key = '1S7_GCCJBU'.
value-text = '1S7_GCCJBU'.
APPEND value TO list.
value-key = '1S7_GCCJCO'.
value-text = '1S7_GCCJCO'.
APPEND value TO list.
value-key = '1S7_GCCJIR'.
value-text = '1S7_GCCJIR'.
APPEND value TO list.
value-key = '1S7_GCCJEN'.
value-text = '1S7_GCCJEN'.
APPEND value TO list.
value-key = '1S7_GCCJPI'.
value-text = '1S7_GCCJPI'.
APPEND value TO list.
value-key = '1S7_GCCJSU'.
value-text = '1S7_GCCJSU'.
APPEND value TO list.
value-key = '1S7_GCCJFL'.
value-text = '1S7_GCCJFL'.
APPEND value TO list.
value-key = '1S7_GCCJOT'.
value-text = '1S7_GCCJOT'.
APPEND value TO list.
value-key = '1S7_GCCASV'.
value-text = '1S7_GCCASV'.
APPEND value TO list.
value-key = '1S7_GCCASE'.
value-text = '1S7_GCCASE'.
APPEND value TO list.
value-key = '1S7_GCCOOC'.
value-text = '1S7_GCCOOC'.
APPEND value TO list.
value-key = '1S7_GCCOHD'.
value-text = '1S7_GCCOHD'.
APPEND value TO list.
value-key = '1S7_GCCRD'.
value-text = '1S7_GCCRD'.
APPEND value TO list.
value-key = '1S7_GCCGEN'.
value-text = '1S7_GCCGEN'.
APPEND value TO list.
value-key = '1S7_GCDRI'.
value-text = '1S7_GCDRI'.
APPEND value TO list.
value-key = '1S7_GCDJOB'.
value-text = '1S7_GCDJOB'.
APPEND value TO list.
value-key = '1S7_GCDASV'.
value-text = '1S7_GCDASV'.
APPEND value TO list.
value-key = '1S7_GCDASE'.
value-text = '1S7_GCDASE'.
APPEND value TO list.
value-key = '1S7_GCDOOC'.
value-text = '1S7_GCDOOC'.
APPEND value TO list.
value-key = '1S7_GCDOHD'.
value-text = '1S7_GCDOHD'.
APPEND value TO list.
value-key = '1S7_GCVER'.
value-text = '1S7_GCVER'.
APPEND value TO list.
value-key = '1S7_GCVJOB'.
value-text = '1S7_GCVJOB'.
APPEND value TO list.
value-key = '1S7_GCVASV'.
value-text = '1S7_GCVASV'.
APPEND value TO list.
value-key = '1S7_GCVASE'. -
Post data 2kb to server failed
hi:
My app send image to server and it works well with nokia phones , but not with sony ericsson phones.
The se phones post data in chunked encoding when data size more then 2kb, there seems no chance to make changes to client behavior.
My server is tomcat 4.1 , it claims to support http1.1 and chunked encoding.
then why?
There many post about this topic, but no good or reasonable solution to this.
What can i do about this? Any advice?
best regardsI have run into the same problem on other handsets as well (Nokia, etc.)
We found two solutions:
1) The version of apache we were using (1.3?) would not accept chunked POSTs. We upgraded to the latest version (2.2.3?) and magically our chunked POSTS were accepted by the server. I believe this support was added in v2.2 of apache.
2) You can also roll your own custom imlementation of HTTP POST that operates over sockets. I had to do this once on a BREW handset that refused to send more than 1.5k (total) of POST data.
Hope this helps,
Sam
Maybe you are looking for
-
Problem of upload file into the fieldpoint
hi,all I have build the program for fieldpoint.Then,i want to upload it to the fieldpoint 2000.But it dont allow me to do so,said that it is not authorized to do so. But i cannt upload any file or build any new file. However,i can upload a small VI w
-
How to bulk import data into CQ5 from MySQL and file system
Is there an easy way to bulk import data into CQ5 from MySQL and file system? Some of the files are ~50MB each (instrument files). There are a total of ~1,500 records spread over about 5 tables. Thanks
-
When syncing my Iphone it appears that any music that I ripped from a CD or downloaded from the artists's website is now unplayable on my iphone. Did Apple change their policies so that I can no longer listen to it from my phone? I can still listen
-
Folks, For an RFC connection from a R/3 to XI what permissions does the user in XI need to have to route/transport/map idocs? Does this need to be a service or dialog user? In "Mastering IDoc Business Scenarios with SAP XI" on page 64 it says you nee
-
When opening Firefox the ticket in question pops up - What does it mean? This started about five days ago in 7.0 and wasn't resolved with the 9.0.1 update.