End point error

I m facing the following error when I process a file using the file adapter .
my system is a standalone XI box, im file inbound adapter and idoc outbound adapter.
For inbound interface I have imported the idoc interface from R/3 and for outbound interface(file adapter ) I have created the message interface in the repository and using it in the directory.
I have defined an inbound interface in the directory and defined the end point as idoc adapter.
Do I need to define the endpoint for the outbound interface (file adapter)
Please let me know where is the problem

Hi Homiar,
Thankx for the reply i have resolved the problem ..
but my idoc is created with no data in it .. has only the value of the segment like
<ORDERS04>
- <IDOC BEGIN="1">
<E1EDK01 SEGMENT="1" />
</IDOC>
</ORDERS04>
iam not sure whr is the problem .. idoc is created with red light and it says partner profile not found but i have defined the partner profile..
please let me know if u have any idea abt this..
thankx,
shree

Similar Messages

Trying to install KB3035025 to allow Non-workplace join machines use the UpdatePassword ADFS end point Error the update is not applicable to your computer

I put the hotfix on our ADFS Server (2012 R2) and tried to install it and received this:
I made sure all the prerequisites were installed - they are.
Any ideas?

I did some digging and the version of Microsoft.IdentityServer.Service.dll is version 6.3.9600.17720
This is higher than what is in this hot fix and I guess is related to this update: https://support.microsoft.com/en-us/kb/3045711
In ADFS when I try an change the password for a non-workplace join computer I get a complexity error but I know for sure the password meets the domain complexity requirements.
Thanks in advance!
Jon

End Point Error with Azure Cloud Service

Hey Guys,
I have created a Cloud Service and want to access in my windows 8 store app, But during call the i am getting error like below
There was no endpoint listening at http://batlas2.cloudapp.net/AtlasCloudService.svc that could accept the message. This is often caused by an incorrect address or SOAP action.
See InnerException, if present, for more details.
Any Idea whats the reason and how to fix this.
Regards
Mukesh

Hi,
I have tested this endpoint in my windows store application, it runs well, so I don't think this issue is related to your WCF host server, it may be caused by your windows store app, you can create a test console WCF client and try to connect with this WCF
host server. Please give further information here.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Non transactional end point error

Hi
Error occured in Oracle ESB Control console while implementing customerdata in CustInfile adapter.
java.lang.NullPointerException at oracle.tip.esb.model.entity.Service.loadWSDLOperations(Unknown Source) at oracle.tip.esb.model.entity.ServiceOperation.getWSDLOperation(Unknown Source) at oracle.tip.esb.server.service.EsbRouterSubscription.onBusinessEvent(Unknown Source) at oracle.tip.esb.server.dispatch.EventDispatcher.executeSubscription(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscription(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscriptions(Unknown Source) at oracle.tip.esb.server.dispatch.EventDispatcher.dispatchRoutingService(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(Unknown Source) at oracle.tip.esb.server.dispatch.BusinessEvent.raise(Unknown Source) at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(Unknown Source) at oracle.tip.esb.server.service.impl.inadapter.ESBListenerImpl.processMessage(Unknown Source) at oracle.tip.esb.server.service.impl.inadapter.ESBListenerImpl.onMessage(Unknown Source) at oracle.tip.adapter.fw.jca.messageinflow.MessageEndpointImpl.onMessage(MessageEndpointImpl.java:281) at oracle.tip.adapter.file.inbound.ProcessWork.publishMessage(ProcessWork.java:826) at oracle.tip.adapter.file.inbound.ProcessWork.doTranslation(ProcessWork.java:580) at oracle.tip.adapter.file.inbound.ProcessWork.processMessages(ProcessWork.java:266) at oracle.tip.adapter.file.inbound.ProcessWork.run(ProcessWork.java:179) at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242) at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215) at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:814) at java.lang.Thread.run(Thread.java:595)
Please suggest me why this error occured and also suggest how to solve it.
SureshKumar.R

Hi Homiar,
Thankx for the reply i have resolved the problem ..
but my idoc is created with no data in it .. has only the value of the segment like
<ORDERS04>
- <IDOC BEGIN="1">
<E1EDK01 SEGMENT="1" />
</IDOC>
</ORDERS04>
iam not sure whr is the problem .. idoc is created with red light and it says partner profile not found but i have defined the partner profile..
please let me know if u have any idea abt this..
thankx,
shree

Error while creating the end point ICMON_UI_WS - SP11

Hi All,
We have upgraded the SAP Solution Manager 7.1 SP04 to SP11.
Currently i am working on system preparation.
solman_setup -> System preparation -> 5.3 Enable Web Services getting the below error
CX_URLAPI_URL_EXCEPTION : Error during End Point creation
Long Text(1)
Error during End Point creation.
Text(2)
CX_SRT_WSP_CONFIG : Error when reading variant "ICMON_UI" of service
definition "ICMON_UI": Web service object does not exist
Also checked the note :1900781 - Missing services required by Solman Setup System Preparation Step 4.3 Enable Web Services.
But this note is available for download.
Any idea about this issue.
Rg,
Karthik

Hi
Try out these point
1. Take the backup of the folder .dtc ,.dtr in your home directory.Delete .dtr & .dtc folders in your directoryt,hen try to create it.
2.Check NWDS, WebAS, NWDI, and its compatability ? Which versions are you running now?
3. [Connect to DTR Fails |http://help.sap.com/saphelp_erp2005/helpdata/en/69/21244134a56532e10000000a1550b0/frameset.htm]
4 . See the Note : 939041 & 772755
Best Regards
Satish Kumar

3905 End-Point Maximum Reach Number error message

Dears,
I am Hisham Fawzy, I have an issue about that 3905 End-point, it can't be able to transfer internally & externally and this message appear when pressing Transfer button " Maximum Reach Number". I believe that firmware issue but i need to confirmation.
Note: Number of calls= 4 & Busy trigger= 2 in line configuration.
Thanks,
Hisham Fawzy

Never seem this error, although I have installed a few hundred of these 3905 phones.
Normally it is an issue with number of calls to low, but in your case it seems OK
So just upgrade, and see what is happeneing
Bye

URL Error - Configuring watched folder end point in Adobe LC

I am trying to configure watched folder end point in Adobe LC and it is giving me below error
Invalid url \\server1\PDFLiveCycleFolder. Please check for invalid filename characters in the url.
Same path can be accessed from windows explore. What could be the reason?

You need to check the access rights.
Check this - http://help.adobe.com/en_US/livecycle/9.0/adminHelp/admin.htm?content=000106.html
~ Varun

WMIProviderException: An error occurred when attempting to connect to the report server remote procedure call (RPC) end point

I am getting the following error message while trying to configure a database for a Reporting Service Server. Both SQL Server and Reporting server are 2012 named instances. I have 2014 instances as well on the same server.
Exception details...
Microsoft.ReportingServices.WmiProvider.WMIProviderException: An error occurred when attempting to connect to the report server remote procedure call (RPC) end point. Verify that the Report Server Windows service is running, and then retry the operation.
---> System.Runtime.InteropServices.COMException (0x800706B3): The RPC server is not listening. (Exception from HRESULT: 0x800706B3)
   --- End of inner exception stack trace ---
   at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.ThrowOnError(ManagementBaseObject mo)
   at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.GenerateDatabaseScript(String databaseName, Int32 lcid, Boolean isSharePointIntegrated, String& script)
   at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.GenerateDatabaseScript(String databaseName, Int32 lcid, Boolean isSharePointIntegrated, String& script)
Can someone help me on this please?

Hi Jaigi,
According to your description, you want to change a report server database for Reporting Services. But it fails on the last step and returns a error. Right?
In this scenario, it seems you are creating a report server database on another server via remote connection. Based on the error message, it has issues on executing the script for generating new database. Please check if you have permission to connect the
server and create a new database. Also please check if the Reporting Services Windows services is working properly.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

End Point Reference Error

Hi,
We are working on a project where SAP system will be integrated with Intalio BPM suite. When we try to create a sales order from Intalio, we are getting "End Point Reference Error" . We are using "BAPI_SALESORDER_CREATEFROMDATA" to create the sales order.
When we tried with "BAPI_SALESORDER_CREATEFROMDAT2" we are not able to map the partner details to the BAPI parameters as it is not displaying the existing parameters under the "Order_Partner_In" head.
Also it will be great if someone can provide us with the mandatory fields for "BAPI_SALESORDER_CREATEFROMDAT2" as we are not able to create the sales order with the following mandatory inputs.
ORDER_HEADER_IN : DOC_TYPE     Sales document type
                  SALES_ORG    Sales organization
                  DISTR_CHAN   Distribution channel
                  DIVISION     Division
ORDER_PARTNERS..: PARTN_ROLE   Partner role, SP sold-to party
                  PARTN_NUMB   Customer number
ORDER_ITEMS_IN..: MATERIAL     Material number
Please help us in resolving this issue.

Hi Homiar,
Thankx for the reply i have resolved the problem ..
but my idoc is created with no data in it .. has only the value of the segment like
<ORDERS04>
- <IDOC BEGIN="1">
<E1EDK01 SEGMENT="1" />
</IDOC>
</ORDERS04>
iam not sure whr is the problem .. idoc is created with red light and it says partner profile not found but i have defined the partner profile..
please let me know if u have any idea abt this..
thankx,
shree

Transport control program tp ended with error code 0211

Dear Experts,
I have a problem in doing the import after the client export was successfully done.
I am actaully tring to do a client import/export from the PRD server to DEV server.
On PRD the client is 900 and on the DEV the client is 240.
I have manually copied the transport requests created into the
/usr/sap/trans/cofiles and /usr/sap/trans/data folders to the same on the DEV server.
After coping them,
I have tried to add these transport requests to the DEV server queue, i get the following error message
Transport control program tp ended with error code 0211
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: ADDTOBUFFER RT2KT00014 RT1 pf=/usr/sap/trans/bin/T
Return code: 0211
Error text: no info about transport request found
Request: RT2KT00014
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary.
After this I have tried to add the transports to the buffer at the OS level using the command
./tp pf=TPPARAM addtobuffer "RT2KT00014" RT1 U18 by going to the folder
/usr/sap/trans/bin
But it says that the tp is not found.
I have also checked the permissions for the TRANS folder, it has full access i.e 777
This is where i am struck, and the client has to be imported asap as the requirement for the SUPPORT TEAM is very urgent.
We are on AIX, Oracle 10G and ECC6
Thanks and regards
Harry

Dear Imtiaz,
Thanks for your quick fire reply...
The link helped me but it could not resolve my issue..
Infact i found it my self that the transport requests had to be given full FILE PERMISSIONS at the OS level
I logged in as ROOT
and changed directory to /usr/sap/trans/cofile and gave the command
chmod 777 RT00014.RT2 and
chmod 777 RX00014.RT2
and then went to STMS>SYSTEMS>Import View>Extras>Other requests--> Add ..
Here i added the request nos and then it added up in the queue and then i started the import.
Anyway thank you very for your reply..
Awareded points to you.
Thanks and regards
Harry...

Releasing a Transport Request ends with error code 0012.

Hi,
We have a Development system and a Production System (both running on separate windows machine) but they are not connected in STMS. We perform transporting of Requests at o.s level and NOT through STMS.
We are facing this new problem - We are trying to release a Transport Request in SE01 and it ends with error code 0012. The task inside the Request is released without any error. There is no Notes in SAP Marketplace for this.
Test call of transport control program (tp) ended with return code 0012
Message no. TK094
Diagnosis
Your transport request could not be exported, since all requirements were not fulfilled.
Calling the transport control program tp
"tp EXPCHK EFIK900025 pf=E:\usr\sap\trans\bin\TP_DOMAIN_EFI.PFL -Dtransdir=E:\usr\sa"
which checks the export requirements, returned the following information:
Return code from tp: 0012
Error text from tp: ERROR: Buffer check failed.
System Response
Further processing is terminated.
Procedure
Check the following points:
Feasibility of the transport control program tp
Parameter settings in the transport profile
Availability of the transport directory and the subdirectories (cofiles, data, log, sapnames, bin)
Write authorization for the subdirectories
Write authorization for the files of the subdirectories cofiles, data, log, sapnames
Release the request again when the error has been removed
Please help.
Regards,
Mohan.

Hi Mohan,
Nice to hear that that your problem is resolved.
For Pamater CTC, please check the below links:
Automatic transport between DEV clients ?
http://sapsolutions.searchsap.com/kw;ExtendedTransportControl/content-sap.htm
Regards,
Hari Kishan

Client Export ended with errors

Hi All,
It is very urgent. Please help!
I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
Command file......................... PRDKT00024
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0008
Transport program tp could not be started (RC= 0)
Program ended with error or warning, return code: F
Runtime (seconds)         :          9,222
End of processing: 21:04:45
Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
Is this a successfully export or not? please advise.
thanks,
bichloan

In Al11 what does DIR_TRANS pointing to?
Make sure you have enough space there as it will export the 2 files to the transport directory.
Have you tried Remote Client Copy.
Thanks
Adil

Designing for floating point error

Hello,
I am stuck with floating point errors and I'm not sure what to do. Specifically, to determine if a point is inside of a triangle, or if it is on the exact edge of the triangle. I use three cross products with the edge as one vector and the other vector is from the edge start to the query point.
The theory says that if the cross product is 0 then the point is directly on the line. If the cross product is <0, then the point is inside the triangle. If >0, then the point is outside the triangle.
To account for the floating point error I was running into, I changed it from =0 to abs(cross_product)<1e-6.
The trouble is, I run into cases where the algorithm is wrong and fails because there is a point which is classified as being on the edge of the triangle which isn't.
I'm not really sure how to handle this.
Thanks,
Eric

So, I changed epsilon from 1e-6 to 1e-10 and it seems to work better (I am using doubles btw). However, that doesn't really solve the problem, it just buries it deeper. I'm interested in how actual commercial applications (such as video games or robots) deal with this issue. Obviously you don't see them giving you an error every time a floating point error messes something up. I think the issue here is that I am using data gathered from physical sensors, meaning the inputs can be arbitrarily close to each other. I am worried though that if I round the inputs, that I will get different data points with the exact same x and y value, and I'm not sure how the geometry algorithms will handle that. Also, I am creating a global navigation mesh of triangles with this data. Floating point errors that are not accounted for correctly lead to triangles inside one another (as opposed to adjacent to each other), which damages the integrity of the entire mesh, as its hard to get your program to fix its own mistake.
FYI:
I am running java 1.6.0_20 in Eclipse Helios with Ubuntu 10.04x64
Here is some code that didn't work using 1e-6 for delta. The test point new Point(-294.18294451166435,-25.496614108304477), is outside the triangle, but because of the delta choice it is seen as on the edge:
class Point
     double x,y;
class Edge
     Point start, end;
class Triangle
     Edge[] edges;
     public Point[] getOrderedPoints() throws Exception{
          Point[] points = new Point[3];
          points[0]=edges[0].getStart();
          points[1]=edges[0].getEnd();
          if (edges[1].getStart().equals(points[0]) || edges[1].getStart().equals(points[1]))
               points[2]=edges[1].getEnd();
          else if (edges[1].getEnd().equals(points[0]) || edges[1].getEnd().equals(points[1]))
               points[2]=edges[1].getStart();
          else
               throw new Exception("MalformedTriangleException\n"+this.print());
          orderNodes(points);
          return points;
        /** Orders node1 node2 and node3 in clockwise order, more specifically
      * node1 is swapped with node2 if doing so will order the nodes clockwise
      * with respect to the other nodes.
      * Does not modify node1, node2, or node3; Modifies only the nodes reference
      * Note: "order" of nodes 1, 2, and 3 is clockwise when the path from point
      * 1 to 2 to 3 back to 1 travels clockwise on the circumcircle of points 1,
      * 2, and 3.
     private void orderNodes(Point[] points){
          //the K component (z axis) of the cross product a x b
          double xProductK = crossProduct(points[0],points[0], points[1], points[2]);
          /*        (3)
           *          +
           *        ^
           *      B
           * (1)+             + (2)
           *       ------A-->
           * Graphical representation of vector A and B. 1, 2, and 3 are not in
           * clockwise order, and the x product of A and B is positive.
          if(xProductK > 0)
               //the cross product is positive so B is oriented as such with
               //respect to A and 1, 2, 3 are not clockwise in order.
               //swapping any 2 points in a triangle changes its "clockwise order"
               Point temp = points[0];
               points[0] = points[1];
               points[1] = temp;
class TriangleTest
     private double delta = 1e-6;
     public static void main(String[] args) {
                Point a = new Point(-294.183483785282, -25.498196740397056);
          Point b = new Point(-294.18345625812026, -25.49859505161433);
          Point c = new Point(-303.88217906116796, -63.04183512930035);
          Edge aa = new Edge (a, b);
          Edge bb = new Edge (c, a);
          Edge cc = new Edge (b, c);
          Triangle aaa = new Triangle(aa, bb, cc);
          Point point = new Point(-294.18294451166435,-25.496614108304477);
          System.out.println(aaa.enclosesPointDetailed(point));
      * Check if a point is inside this triangle
      * @param point The test point
      * @return     1 if the point is inside the triangle, 0 if the point is on a triangle, -1 if the point is not is the triangle
      * @throws MalformedTriangleException
     public int enclosesPointDetailed(LocalPose point, boolean verbose) throws Exception
          Point[] points = getOrderedPoints();
          int cp1 = crossProduct(points[0], points[0], points[1], point);
          int cp2 = crossProduct(points[1], points[1], points[2], point);
          int cp3 = crossProduct(points[2], points[2], points[0], point);
          if (cp1 < 0 && cp2 <0 && cp3 <0)
               return 1;
          else if (cp1 <=0 && cp2 <=0 && cp3 <=0)
               return 0;
          else
               return -1;
         public static int crossProduct(Point start1, Point start2, Point end1, POint end2){
          double crossProduct = (end1.getX()-start1.getX())*(end2.getY()-start2.getY())-(end1.getY()-start1.getY())*(end2.getX()-start2.getX());
          if (crossProduct>floatingPointDelta){
               return 1;
          else if (Math.abs(crossProduct)<floatingPointDelta){
               return 0;
          else{
               return -1;
}

Defining End point

Hi all,
I have a standalone XI 2.0 and my scenario is
file - XI - idoc (R/3)
i have the flat file in my XI box and im using inbound file adapter.
but i have a problem in defining the end point .
im getting an error message like
end point not defined for the sender system
my sender system is XI and my receiver system is R/3
im using file inbound adapter and idoc outbound adapter.
i have defined the end point for the receiver system as idoc.
wht will be my sender system endpoint .
if any has any idea pls help me.
thankx,
shree

Hi Shree,
Yes, it's true that in your case the flat file my in fact reside on the XI machine. However, from an XI point of view, you must still register the file adapter first within the SLD and then do the appropriate configuration within XI as Bjorn mentioned. Consider a situation where you may have a file to file scenario with XI performing transformation in the middle...in this case you need two "logical" systems here even though they are installed on the same physical box. One for the first file adapter instance and another for the second file adapter instance.
Good luck!!!
...Scottd

Metadata Load - Invalid tree insertion point error

Does any one know what this error means when you get it trying to load a metadata file? Invalid tree insertion point error
Renaming members...
Scenario
Entity
Account
Custom1
Custom2
Custom3
Custom4
Currency
[ConsolMethods]
No consolidation method section
Currencies...
Currencies OK
Entities...
Error: Invalid tree insertion point
Error: Invalid tree insertion point
Load ended at: 12:39:40
Elapsed time: 00:00:18

Hi all,
I have a question,
Have you tried to rearrange the hierarchies and move a lower generation parent higher in dimension?
So, for example:
Current tree:
Parent 1
     Parent2
          Base
New tree:
Parent2
     Parent1
          Base
Regards,
Thanos

End point error

Similar Messages

Maybe you are looking for