End Point URI change in Business service?

Hi all,
We had done all our osb code development and moving from one environment to other(Eg. E2E testing to UAT, Then UAT to Production). When we move the codes from one server to the other we need to change the End Point URI in the business service for almost all the OSB services which calls external systems else Calling BPEL services. SO is there any other way to make the end point URI's in some other file and read that file to get the end point URI and set in BS. Or did any one have any other suggestions?? Because each and every time we need to make the code change when we move on from one server to other.
Regards,
Prabhu

Why don't you use customization file -
http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15867/customization.htm#CACJCAGD
Regards,
Anuj

Similar Messages

  • Log endpoint URI of  a Business Service OSB

    Hi,
    I want to log the endpoint URI of a business service (OSB) that I'm calling from a proxy service. Can anybody tell me how to do this?
    Thanks in advance!
    Martín.-
    Edited by: 876766 on Aug 16, 2011 7:31 AM

    In the response (pipeline) you have this attribute: $outbound/ctx:transport/ctx:uri.

  • Trading partner - End Point URI

    Hi,
    I have trying to creat a B2B application based on similar lines as the Buyer Supplier
    workflow provided as the part of the samples.
    Now, when I am defining the trading partner, I need to define the end point URI.
    I believe this is some entity (probably) a servlet, that listens to requests fro
    other trading partners. Now the enity that I entered here, should I create it or
    doe the integration platform create it for me.
    I feel that its not getting created, because when defining the CPA, and when trying
    to enable it, the B2B server front end hangs. There is a log though in the log file.
    INFO: Collaboration Agreement test/163.122.33.185:5a6c6b:edfce8a856:-8000 is successfully
    enabled in Collaborate Server.>
    INFO: Collaboration Agreement test/163.122.33.185:5a6c6b:edfce8a856:-8000 is registered
    successfully
    Now, are these two problems related.
    Thanks and regards
    RAD

    Again after this I was getting Document Protocol Error, and PROTOCOL_ENDPOINT = null
    I came to know from dheeraj's reply that these errors are only due to me bad payload.
    In document Editor if we say generate the data, actually the data is not valid data, I opened the .dat file in Document Editor analyser and it showed me the errors.
    I corrected teh errors, and now I am still getting error "5016: A mandatory data element is missing"
    Segment ISA(Interchange Control Header) at guideline position (N/A) is missing.
    I am still checking with the payload for the validation against the ecs file.
    Thanks Dheeraj for your answer, I got some confidence.

  • OSB : Endpoint URI problem in business service

    I have to invoke a http service from OSB where endpoint uri is http://<ip>:<port>/Resource.
    At invocation time OSB is adding "?" to the end of URI, in that case http message is becoming like following:
    POST /Resource? HTTP/1.1
    External service is considering it as a bad request and giving 500 response code with following comments:
    Error occured: 500, Cannot find local resource: /Resource?
    But I am getting proper response when I am calling from java program with http message POST /Resource HTTP/1.1
    It is not possible to change the external system, now how can I solve the problem??
    Please help.
    Thanks
    Afzal
    Edited by: uttam on May 2, 2012 9:49 PM

    Open your business service and navigate to HTTP Transport configuration page and check what is the http type is enabled.
    Look to me its with GET method, change it to POST and re-try.
    If the above solution is not helping, try to check the Follow HTTP redirects check box below the Advanced Setting in same page.
    Thanks,
    Vijay

  • How to find the end point URL for a Enterprise Service?

    Hi,
    I'm trying to find the URL for a service called "DocumentERPFileVariantByIDAndFileVariantIDQueryResponse"
    so it can be called through .NET.
    I've been able to locate the WSDL and generated the proxy objects through this URL:
    http://<server>:8000/sap/bc/srt/wsdl/sdef_ECC_DOCUMENTFVBYFVIDQR/wsdl11/ws_policy/document?sap-client=<client>
    But in the WSDL there's no end point definition included, so where can the service it self be found?
    Thanks.
    Regards,
    Frank

    Hi Frank
    Did you check in SOAMANAGER if the service is there? If there is no end point there, you can create one.
    Rgds
    Eng Swee

  • END point URL for ESB Routing service says NOT FOUND

    Hi All,
    For the routing services in ESB, The link of WSDL is opening up fine, but the link of endpoint URI for the routing service is failing with the message below message. When i invoke the WSDL using SOAP UI, i get back the the same error message. I tried bouncing the server , but of no help. I also notice that slide directory ESB_Projects gives 404 error on any browser.
    So when i click below url for any of the routing service
    http://<hostname>:<port>/event/<systemName>/<serviceGroupName>/AddressStandardizeRS
    I get below error in browser-
    Not Found
    The requested URL /event/<System Name>/<Service Group Name>/<Routing Service Name> was not found on this server.
    Oracle-Application-Server-10g/10.1.3.1.0 Oracle-HTTP-Server Server at odevsoa.local1.wbcgp.com Port 7777

    Check if the port of ESB in your server is open.
    I think that the port is: 7777
    try from ESB server:
    wget WSDLURI
    if you got the file then the port is closed.

  • Esbsvc file has wrong end point uri

    Dear All,
    I am working on ESB.
    The SOAP Endpoint URI is http://localhost:8888/event/DefaultSystem/<>
    The concrete WSDL points to correct WSDL.
    I am trying to change the SOAP Endpoint URI but I do not which file should I change for it.
    there is no option to change the SOAP Endpoint URI as it seems it is picked from other place
    Please share any way I can correct the SOAP Endpoint URI
    Best Regards
    Arc
    Edited by: ArchitectView on Jan 28, 2010 10:59 PM

    i'm not sure if this is what you need :
    http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28211/esb_console.htm
    Viewing or Modifying an Existing ESB System Definition
    but there you can change the hostname/url of the system

  • End Point Error with Azure Cloud Service

    Hey Guys,
    I have created a Cloud Service and want to access in my windows 8 store app, But during call the i am getting error like below 
    There was no endpoint listening at http://batlas2.cloudapp.net/AtlasCloudService.svc that could accept the message. This is often caused by an incorrect address or SOAP action. 
    See InnerException, if present, for more details.
    Any Idea whats the reason and how to fix this.
    Regards
    Mukesh

    Hi,
    I have tested this endpoint in my windows store application, it runs well, so I don't think this issue is related to your WCF host server, it may be caused by your windows store app, you can create a test console WCF client and try to connect with this WCF
    host server. Please give further information here.
    Best Regards,
    Jambor
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Different number of Business service endpoint for prod/non prod env in OSB

    Hi,
    I have a scenario in my project. We have 2 managed servers in all non production environment and 4 servers in production environment.
    In non production environments, have added 2 end point uri in the business service. If we create customization file from this, it will have only 2 endpoint uri details.
    Now problem is how to get all 4 enpoint uri added for production environment. Dont know how if we try to add 2 uris in customization file will work fine or not. Also it will be very cumbersome as there are more than 100 business services.
    Tried with comma seperated urls, but load balancing is not happening. Same thing when cluster address is used.
    Any pointers on this will be helpful.
    Regards,
    Pravin
    Edited by: pravinkapile on Sep 29, 2009 9:39 PM

    Hi..
    There's several ways to do it.. What I prefer to do is to generate the customization files and have a seperate set for each environment. As you say hand modifying the customization files is a pain (and error prone), so I wrote a program to generate the customization files.. basically it runs against my local dev environment, creates an edit session, modifies the env values (these are held in a properties file (easier to maintain)), exports the customization files and sbconfig jars, then discards the edit session.
    I then use a wlst/jmx script to perform the imports and running the customization files, then after the customization is ran, then I have a section that modifies the business service with multiple endpoints to set them up to load balance/failover..
    this is the function in my utils script to set the load balancing/failover....
    #=======================================================================================
    # Routine to modify all Business Endpoints with multiple URI's to set the Loadbalancing
    # algorithm to Round-Robin -
    #   Input must be an editable instance of an ALSBConfigurationMBean.
    #=======================================================================================
    def configureMultipleBSEndpoints(domainService, alsbSession):
      try:
        # get the Service config MBean
        servConfMBean = getServiceConfigurationMBean(domainService, alsbSession.getSession())
        bsQuery = BusinessServiceQuery()
        bsRefs = alsbSession.getRefs(bsQuery)
        changesToCommit = cju.parseBoolString("false")
        for bsRef in bsRefs:
          modificationsMade = cju.parseBoolString("false")
          serviceDefinition = servConfMBean.getServiceDefinition(bsRef)
          endPointConfig = servConfMBean.getEndPointConfiguration(bsRef)
          if endPointConfig.getURIArray().__len__() > 1:       
            outBoundProps = endPointConfig.getOutboundProperties()
            if outBoundProps.getLoadBalancingAlgorithm() == LoadBalancingAlgorithmEnum.NONE:
              outBoundProps.setLoadBalancingAlgorithm(LoadBalancingAlgorithmEnum.ROUND_ROBIN)
              modificationsMade = cju.parseBoolString("true")
            if outBoundProps.getRetryApplicationErrors():
              outBoundProps.setRetryApplicationErrors(cju.parseBoolString("false"))
              modificationsMade = cju.parseBoolString("true")
            retryCount = endPointConfig.getURIArray().__len__() - 1
            if outBoundProps.getRetryCount() != retryCount:
              outBoundProps.setRetryCount(retryCount)
              modificationsMade = cju.parseBoolString("true")
            if outBoundProps.getRetryInterval() != 2:
              outBoundProps.setRetryInterval(2)
              modificationsMade = cju.parseBoolString("true")
            serviceOpsEntry = servConfMBean.getServiceOperations(bsRef)
            if cju.booleanToString(serviceOpsEntry.isTakingURIOfflineEnabled()) == "false":
              serviceOpsEntry.setTakingURIOfflineEnabled(cju.parseBoolString("true"))
              serviceOpsEntry.setDelayInterval(15);
              modificationsMade = cju.parseBoolString("true")
            if modificationsMade:
              print 'endpoint configuration modifications made to - ' + bsRef.getFullName()
              hmServiceOpEntries = HashMap()
              hmServiceOpEntries.put(bsRef, serviceOpsEntry)
              endPointConfig.setOutboundProperties(outBoundProps)
              serviceDefinition.setEndpointConfig(endPointConfig)
              servConfMBean.updateService(bsRef, serviceDefinition)
              servConfMBean.updateServiceOperations(hmServiceOpEntries)
              changesToCommit = cju.parseBoolString("true")
        return changesToCommit
      except:
        print "Unexpected error:", sys.exc_info()
        print 'Failed to Configure Business Service Multiple Endpoints LoadBalancing Algorithm '
        raise..Mark.

  • ALSB 2.6 - Export Business Service End point information

    All,
    IHAC that require to extract all his current Business Services end point URI.
    What is the most effective way of doing so? WLST?
    Do you have sample/doc/...?
    Tyia,
    AR

    Hi Arnaud,
    I would do with a java class using mbeans: SessionManagementMBean and ALSBConfigurationMBean.
    This link has examples:
    http://docs.oracle.com/cd/E17904_01/apirefs.1111/e15033/com/bea/wli/sb/management/configuration/SessionManagementMBean.html#skip_navbar_top
    Cheers,
    Vlad

  • Oracle Service Bus - Business Service Endpoint URI - Change at runtime

    Hi,
    Is there a way of changing/passing the endpoint URI to a Business Service at runtime? The reason for my question is that depending on the content of the message in a Proxy Service that calls this Business Service I may need to change the URI.
    Kind Regards,
    Adel

    Adel,
    Is there some use-case limitation that would stop us from using Dynamic routing ?
    http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/userguide/modelingmessageflow.html#wp1100135.
    DynamicRouting /Dynamic publish can be considered depending on the use-case.
    Other option is to use Routing options: Modify any or all of the following properties in the outbound request: URI, Quality of Service, Mode, Retry parameters, Message Priority.
    Manoj

  • OSB: Invoking multiple endpoint URIs or business service at same time

    Hi All,
    I want to route the request to two end point URIs or business services using OSB.
    Say for example, I have a BPEL which is deployed in two servers. Using this solution I have to invoke the deployed service in both servers as soon as I receive input.
    Please help.
    Thanks in Advance

    yes you can.
    1. place URIs in a xml. Save XML as a xquery resource say URICollection.xquery.
    2. assign this URICollection.xquery to a variable say URICollectionVariable.
    3. extract desired URIs using a xquery from URICollectionVariable. Two URIs can be stored inside one parent element, which can be output as result.
    4. replace business service URI with desired URI (from result) using "Routing options".
    To propagate request to two different locations, you need to use "for each" action. Run the "for loop" exactly two times, write logic for above item no.4- inside the for loop action.

  • OSB: Business Service URI modification

    Hi,
    i have WS-based proxy service that simply routes data to business service (also WS-based). There is only one instance of this proxy service and it uses one definition of business service.
    The development model I have to respect involves many instances of this business service. While interface is always the same, endpoints slightly differ, but match certain pattern. For ease of maintenance I decided to have only one proxy service that uses Routing Options to override endpoint URI in runtime. So far, so good.
    The problem is that I have to override URI completely and I have to construct new URI in the message flow from scratch. I don't see any possibility just to modify URI set in business service. This implies that I can't use customization feature for this URI when moving my configuration from test to production.
    The feature I'm looking for should allow me to have one static part of URI and the second (dynamic) part that should be attached in the proxy service message flow. It would be great if I could somehow read URI from business service definition and slightly rearrange it. In that case it would be possible to make use of customization.
    Any idea?

    Thanks for your effort, guys, but could you be a little more specific? :-) I went through some documentation (here and here) and as far as I understand it, dynamic routing can help me to choose business service in runtime. But I have only one business service and I just would like to mangle its URI somehow.
    Let's say I want to route message to my BS that has one URI set to "jms://localhost:7001/factory/my.queue.number." which is incomplete and is supposed to be completed in runtime. In message flow I want to route to this BS, but change the URI before to something like
    jms://localhost:7001/factory/my.queue.number.ONE
    jms://localhost:7001/factory/my.queue.number.TWO etc.
    Tokens ONE, TWO, ... are based on message content.
    I can't see from documentation how dynamic routing can be of any help in this case. I also know I can change URI in Routing Options, but this new URI must be absolute. But for using absolute URI I have to have it hard coded in message flow which will break customization.

  • Oracle Service Bus - Business Service Endpoint URI - Dynamic

    Hi,
    I'm trying to find a way to avoid hard-coding the endpoint URI in a business service. The reason I need to achieve this is because for the different environments (development, testing, production, etc...) the URI will be different.
    I have spent the past 2 days searching the oracle forum and documentation but have come up with nothing. Is there a way to achieve this?
    Preferably, is there a way to store the endpoint URIs in a configuration/properties file which can be changed when needed?
    Any help is much appreciated!
    Best Regards,
    Adel Haider

    Hi Adel,
    Customization file will be the best solution for your problem. You may generate a environment specific customization file. To know more, please refer -
    http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/consolehelp/customization.html#wp1129087
    Simplest solution would be to generate a customization file and replace the existing URI's with the required one's using replace all option of textpad. Run this customization file at target environment, after importing the OSB configuration.
    Regards,
    Anuj

  • OSB Business Service Work Manager Doesnt Throttle

    Hi,
    I have a requrirement to throlle the number of concurrent requests going to an end point.
    So i have used OSB business service where in i am calling an end point webservice, and configured a work manager in console and selected it in the dispatch policy
    I deployed the workmanager on managed server. i specified max concurrent threads as 3.
    I tried to test it and see that throttling doesnt really work.. All the requests sent are being sent at once not 3 at a time.
    The expected behavior is first 3 sdhud go and then onc ethey complete next 3 similary next 3. But i dont see that behavior. Please let me know if i am doing any worng
    below is my work manager configuration
    Service Type Any XML Service
    Transport Configuration
    Protocol http
    Load Balancing Algorithm round-robin
    Endpoint URI <Specified the end point URI>
    Retry Count 0
    Retry Iteration Interval 0
    Retry Application Errors Yes
    HTTP Transport Configuration
    Read Timeout 0
    Connection Timeout 0
    HTTP Request Method POST
    Authentication None
    Proxy Server
    Follow HTTP redirects Disabled
    Use Chunked Streaming Mode Enabled
    Dispatch Policy WorkManagerTest
    Message Handling Configuration
    XOP/MTOM Support Disabled
    Page Attachments to Disk No
    Result Caching Not Supported
    Any suggestions on this?
    Edited by: 791951 on Mar 17, 2011 7:51 AM

    If you need to throttle the Business service, then you should configure the throttling parameters in the Business Service -> Operational Settings tab
    Choose your Business Service in the OSB Console -> Operational Settings
    Throttling -Check this box to enable the throttling. Maximum Concurrency to 3, and Throttling Queue to x number of messages you wish to hold in the throttling queue

Maybe you are looking for