How to find the end point URL for a Enterprise Service?

Hi,
I'm trying to find the URL for a service called "DocumentERPFileVariantByIDAndFileVariantIDQueryResponse"
so it can be called through .NET.
I've been able to locate the WSDL and generated the proxy objects through this URL:
http://<server>:8000/sap/bc/srt/wsdl/sdef_ECC_DOCUMENTFVBYFVIDQR/wsdl11/ws_policy/document?sap-client=<client>
But in the WSDL there's no end point definition included, so where can the service it self be found?
Thanks.
Regards,
Frank

Hi Frank
Did you check in SOAMANAGER if the service is there? If there is no end point there, you can create one.
Rgds
Eng Swee

Similar Messages

END point URL for ESB Routing service says NOT FOUND

Hi All,
For the routing services in ESB, The link of WSDL is opening up fine, but the link of endpoint URI for the routing service is failing with the message below message. When i invoke the WSDL using SOAP UI, i get back the the same error message. I tried bouncing the server , but of no help. I also notice that slide directory ESB_Projects gives 404 error on any browser.
So when i click below url for any of the routing service
http://<hostname>:<port>/event/<systemName>/<serviceGroupName>/AddressStandardizeRS
I get below error in browser-
Not Found
The requested URL /event/<System Name>/<Service Group Name>/<Routing Service Name> was not found on this server.
Oracle-Application-Server-10g/10.1.3.1.0 Oracle-HTTP-Server Server at odevsoa.local1.wbcgp.com Port 7777

Check if the port of ESB in your server is open.
I think that the port is: 7777
try from ESB server:
wget WSDLURI
if you got the file then the port is closed.

Change the end point URL in WSDL for web-service

Hi All,
Morning , could someone please help us with this question, we are stuck with this currently.
In SOA Suite 10g as well 11g we have a jsimple Java class whose one of the methods is exposed as a web service.
In the project it has created the WSDL as well and have deployed the .ear file to the servers from EM console successfully.
Now we need to migrate this web service to testing & production environments.
1. Could someone please let us know the steps as to how do we change the end point url in the WSDL for this web service (present in web content --> WEB-INF/wsdl path in the j-developer project) for migration in case of both 10g (OC4J) as well 11g (WLS) servers.
2. Also could this change/update be done prior to deployment as well as post deployment as well.
Looking forward to inputs regards this...as we are stuck with this ..would be very helpful
Thanks as always for help & guidance..

Hi
As Vijay mentioned, you develop a WebService in JDeveloper and test in JDeveloper integrated Weblogic Server say at http://localhost:7101/MyWebService/MyPort?wsdl. Thats it. Once it is working. Export it into a .WAR file. If you have any other supporting EJB JARs etc, put all these into a full blown .EAR at application level. NOW deploy this .EAR or .WAR into any Domain on any host and any port. DOES not matter. That server's host and port will be taken. Infact even if this other domain is Clustered domain, still it will work by giving webserver host and webserver port that sits in front of the cluster.
I develop my webservices in JDeveloper and test at 7101 port. This .WAR gets deployed in QC Env at qchost:qcport. Same .WAR deployed to UAT at uathost:uatport and finally to prod also at prodhost:prodport.
Its just the Client (WebService Proxy) that is calling this WebService need to use appropriate host and port based on which Env it is connecting to. For this, simply do not hard code WSDL URL in the java code or anywhere. Simply get it from a .properties file using a key value pair like this.
WSDL_URL=http://host:port/MyWebService/MyPort?WSDL.
Now have Environment specific values for above key and put that properties file in that domain root folder. And in your code always refer this key.
You can use many approaches along the above lines.
If your WebServies proxy is a webservice adapter say within bpel, still you can modify the value using deployment plan .xml file file while deploying.
I would not absolutely prefer opening war file from ear and modifying war and updating ear file etc etc. Also do not have multiple EARs for Environment specific. Just have only one single EAR or WAR file that can be deployed to any environment.
Thanks
Ravi Jegga

How to find the exact user exit for our requirement?

Dear Mr. keerthi,
can you please explain me how to find the exact user exit for our requirement?

Hi sandip
There is more than one method in which you can check for user-exits.The following method is used very often.
How to find the exact user-exit for your requirement.
1. You can check the user exists using transaction SE85.
2. Repository Information System -> Enhancements -> Customer exits
3. You can search the user-exits by package name.
4. Double click on each exit name to check the function module exits.
The procedure to find the package name.
Execute transaction SE93
Enter the tcode of the transaction for which you want to check the user exit.
Example: if you want to find the user-exit for purchase orders while changing, enter ME22n and press display.
You will get to see the package name
But you need to confirm that the user exit will get triggered at the appropriate event.
( example: you might want some validations to be done ON SAVE of a purchase order)
Checking if the user-exit is getting triggered or not.
1. Open the user exit function module (that you have got in step 4) in Tcode SE37.
2. Click on where used button. In the pop up that immediately appears choose only programs .
3. You will get a list of programs. Double click on the program name.
4. You will get the list of location where this function module user exit is used.
5. Place session break points at each of these location ( at each CALL FUNCTION statement)
6. Now go to your transaction ( say change purchase order tcode:Me22n) and check if the user exit is getting triggered on appropriate event.
regards,
Prasad

How to find the appropriate user exit for invoic02 idoc in idoc_output_invo

Hi all,
I am new to this community p
i have issue regarding the How to find the appropriate user exit for invoic02 idoc in idoc_output_invoic function module.........
thanks,

Hi ,
welcome to SDN.
You can select the appropriate Customer exit accrding to the available parameters .
The list of exits available are
EXIT_SAPLVEDF_001
EXIT_SAPLVEDF_002
EXIT_SAPLVEDF_003
EXIT_SAPLVEDF_004
For Example , if you want to modify the Idoc data(EDIDD) you have to use the EXIT_SAPLVEDF_002. accodingly you can select the user exit according to the avaialable parametres.Use Table MODSAP fto get the Enhancement name.
Hope this Helps
Rgds
Sree
Edited by: Sree on Jul 23, 2010 12:11 PM

How to find the profit center group for a profit center?

How to find the profit center group for a profit center?

Hi,
try this also
In order to pass the setid parameter of the FM, you have to concatenate the following things
Setid + KOKRS (Controlling area) + Profit Center Group into one variable.
In my example below, I have declared as constants and concatenating to gv_setid.
gc_01016 is the set id for profit centers
gc_kokrs is the controlling area
gp_pprct is the Profit Center group entered in the selection screen.
You will get KOKRS value from the cepc-kokrs.
data :   gc_0106(4)   TYPE c VALUE '0106',
           gc_kokrs      LIKE cepc-kokrs VALUE 'ABCD'.
           gv_setid          LIKE sethier-setid,
           gt_set_values_1   LIKE setvalues OCCURS 0 WITH HEADER LINE.
CONCATENATE gc_0106 gc_kokrs gp_pprct INTO gv_setid.
CONDENSE gv_setid.
CALL FUNCTION 'G_SET_TREE_IMPORT'
    EXPORTING
      client                    = sy-mandt
      fieldname                 = 'RPRCTR'
      langu                     = sy-langu
      setid                     = gv_setid
      tabname                   = 'GLPCT'
      no_table_buffering        = 'X'
    TABLES
      set_values                = gt_set_values_1
    EXCEPTIONS
      set_not_found             = 1
      illegal_field_replacement = 2
      illegal_table_replacement = 3
      OTHERS                    = 4.
By using the above FM you will get the values into gt_set_values1 once sys-subrc value eq 0, it is internal table which consists of all the profit centers for the proft center group.
Regards,
Venkatesh

How to find the existing request no for Smart form

Hi Experts,
plz tell me how to find the existing request no for Smart form in ABAP.
thanks in advance.
regards,
radhika.

Radhika,
Choose Goto > Object Directory Entry> Lock Overview On the Initial screen of the "smartforms" transaction, after entering the actual smartform. This would give you the request number for the smartform.
Regards
Narasimhan

How to find the E-Mail address for my HP 6700? Printer shows E-Print connected.

I got help on the board about getting a new printer code and the Home Printer page shows that it is on, but now I don't know how to find the E-Mail address for my computer -
This question was solved.
View Solution.

Hi,
From the printer Front panel, navigate to Setup. Locate and enter Web Services. Aprove any of the steps to enable the service... allow the device several minutes to complete the registration, a page will print automatically with the printer code and the directions to select the email address from hpeprint.com.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can find the location of my iPad when location services is off?

How can find the location of my iPad when location services is off?

If you're wanting to know if you can locate your iPad though iCloud, without Find my device enabled and without power, you won't be able to locate it.

How to switch the end points of a path?

Hi, I was wondering if anyone knows how to switch end points (or revese them).
To give you an idea of what I am talking about, have a look at this image:
you can see that the spiral coils downwards from the start point so that it gets tucked under itself as it spirals.
How could I switch end points so that it spirals downwards from what is now labeled as the end point instead?
Or I guess you could say, how can I make it coil upwards from the start point?
many thanks

In case you ever find yourself in need of the afore-mentioned command that is common in other drawing programs--especially when you want to reverse the direction of multiple paths at once--you might be interested in the Reverse Path Javascript that is included in the collection on this page. It is particularly useful when employing Brushes, as in your example and these:
JET

How do find the end user agreement

how do I find the end user license agreement, I'm so frustrated

I'm guessing that you have been unable to find the way to accept the end user license for Reader. If you are in Windows (which we don't know), you can try using Windows Explorer to navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement. If you are in Mac, open your Applications folder, double click on the Reader icon, follow the instructions to accept the license, close and restart Reader.

How to find the right primary key for DSO from Business Content

According to best practice design, it is reccomended to make a DSO where all fields from Business COntent Datasources are transferred.
But, how to find the right primary indeks ?
Any good suggestions ?
For many of the Business Content dataflows there are not DSOs present, so ther e is no tip to get from the dokumentations as gfar as I have found.
best Regards
Ingrid

Hi Ingrid,
Your question will be perfect in case if you are going for a Custom cube.
You will not have any problem when you create a Datasource in R/3 level even if it is been built on a single table or on view.
Only point that you want to know how to design my Key fields in ODS.
This will be purely depends at what level that you want to bring the data.
Egg:-
If you run the data source in RSA3 and check for Each GL if you have 10 liine items and you want all the 10 line items to be transfered to BW.
In this case you need to check what is the unique combination of fields that is making this lineitems to exists as 10.then include all those fields into Your ODS Key Fields.
This way you can have 10 records for that perticular GL in both sides, by which u will make sure that the data is been completely transfered.
If in case if you clude your own Key fields then you will get the correct Total in report for each GL but you can't see all those 10 line items.
For any case you need to figureout how many records that you want to take into BW based on that check the fields that makes it unique and then add them to ODS Keyfields that will solve your requirement.
I think this will clear your doubt.
Best Regards,
VNK.

How to find the Adobe barcode name for its corresponding SAP Script barcode

Dear All,
We are doing conversions from SAPScript to Adobe forms.
The barcode used in two sapscript forms are 'BC_CD39' and 'ARTINR' respectively .
I would like to know the corresponding barcode name to be assigned to Adobe forms as the above barcode names are not present in the Object Library-> Barcode section of Adobe forms.
regards,
PP

>
Muralidhar Medisetty wrote:
> Hi,
>
> I had an issue, in the transaction F110 Payment advice. They need to adjust the spacing on the cheque printing, which is overlapping the names on the cheque and hence I have forgotten how to find the form name and the driver program of the script. Can anybody suggest me how to find those. Your help will be appreciated.
>
> Thanks in advance.
hey
NACE is the transaction ..for this u must know the output type..
Script for Cheque Printing and Payment Advice can be known from Transaction FBZP...
FBZP -> paying Company Codes -> u will get Script used for Payment Advice
FBZP -> Pmnt methods in company code -> u will get Script used for Cheque Print
....Give points if useful.....
Edited by: Satyabrata sahoo on Oct 14, 2008 4:42 PM

How to find the shipping point creation Date and time

Hi All,
Could you please help to solve this issue.
Some of the users created shipping point, Now I have to find out in which date and time the shipping points were created, is there any table to find. please help me.
Regards,
Muralikrishna

hi Murali,
first define and assign shipping point in enterprise sructure in define shipping point EC07 and assign in OVXC
goto OVL2 and assign the shipping points
The following are used for the shipping point determination:
1. Shipping conditions - Proposed from CMR. The entry in VOV8 for the sales document type if there overwrites the entry in the shipping conditions mainatined in the CMR.
2. Loading group - Proposed from the material master record.
3. Plant - proposed from CMIR - if not found then CMR - if not found then MMR.
But you should first define and assign the shipping point in the "enterprise structure" otherwise you will not be able to do the shipping point determination.
IMG - logistics execution - shipping - basic shipping functions - shipping point & goods receiving point determination - assign shipping points.
Shipping point definition:
IMG - enterprise structure - definition - logistics execution - define, copy, delete, check shipping point. You have to define the shipping point here for the particular plant.
Shipping point assignment:
IMG - enterprise structure - assignment - logistics execution - assign shipping point to plant. Here select your plant and assign the shipping point to the same.
hope this helps,
cheers,
Hema.

How to find public and private url for an EBS instance?

I am asked to find public and private url for an instance. I did in the following way. Can u please correct me if following is wrong.
1) Go to .xml file.
2) found s_external_url and corresponding entry is public URL.
3) found s_login_page and corresponding entry is private URL.
Please correct me any thing is wrong.
Regards
DBA.

please give a hand. online waiting....
thanks....

How to find the end point URL for a Enterprise Service?

Similar Messages

Maybe you are looking for