Enhance timing....how to use it?

I have a kick drum track that could use a bit of enhancement as far as timing is concerned. i played around with the enhance timing feature, but it only seems to make it worse. any suggestions as to the proper way to use this feature? thanks in advance.
jon

Is you kick drum a real recording? A real instrument, the pitch enhancement will move a note to the closest grid position to it, depending on how you had the grid set. I have a bass track, that was done with a triplets grid, and I can't seem to change it from triplets. So, moving the slider will align the notes according to the grid setting below the slider. If you click on it, you'll see some other grid choices. If it seems to be moving the notes a lot further than you want, you may need to set it for more grid positions, so it snaps to a position closer to where the note actually is. I have not been entirely happy with the results I have got, and on some instruments, like bass, I have actually gone into the editor, and split the regions, and physically moved the notes myself. Of course with some instruments, with sustained notes, that isn't always the best way, either. But it worked for the song I did it on.

Similar Messages

  • How to use this HR_GET_PAYROLL_RESULTS in am enhancement spot?

    hi,
            can you explain me how to use this function modulde  HR_GET_PAYROLL_RESULTS.. i have tried this by giving the valid  PERNR AND  YEAR. but still i am getting no table records and some times as wrong table structure. can you  help me out in this regard. i have to use this FM in am enhancement spot.
    thanks in advance.
    swathi.

    Hi,
    Depending of the country for which you want the payroll result you have to define result table as follows:
    data: it_result type payXX_result.      "where XX is an abreviation of the country you get pay result for
                                                         "i.e. US, GB, NL, DE etc
    "for some countries there is no specific cluster table, therefore you must delcare it as
    data: it_result type pay99_result.     "this indicates that results are international
    now you simply call the FM:
    CALL FUNCTION 'HR_GET_PAYROLL_RESULTS'
      EXPORTING
        pernr                               = here your pernr
        pabrj                               = year you want to report
      tables
        result_tab                          = it_result.
    It will work:)
    Marcin

  • How to use E1BPPAREX - IDoc Segment enhancement

    Hi,
    can you provide me with some details on "how to use the E1BPPAREX" IDoc Segment ?
    I want to enhance the standard PRICECATALOGUE02 IDoc with some customer defined fields.
    There is a use of a STRUCTURE FIELD and 4 VALUEPARTS.
    What kind of structure do i have to use ?
    I red something about to enter 2 kind of structures ?
    a) the first part = wrf_pricat_key*
    b) second part = DDIC userdefined structure.
    Thx,
    Gordon

    Hi Gordon,
    1. Map customer data in E1BPPAREX segment fields:
    STRUCTURE     CHAR     30     0     Structure name of  BAPI table extension
    VALUEPART1     CHAR     240     0     Data part of BAPI extension parameter
    VALUEPART2     CHAR     240     0     Data part of BAPI extension parameter
    VALUEPART3     CHAR     240     0     Data part of BAPI extension parameter
    VALUEPART4     CHAR     240     0     Data part of BAPI extension parameter
    2. Build a new implementationof BADI interface IF_EX_PRICAT_OUT_EXTIN  (PRICAT_IN_EXTIN definition name) using SE19
    3. Write the ABAP code for UPDATE_INBOUND_EXTENSIONIN method to manage your additional customer data:
    UPDATE_INBOUND_EXTENSION: This method enables the data from the
    ExtensionIn table parameter to be processed. This parameter may contain
    customer-specific data that is either to be integrated into standard
    tables in the price catalog, or stored in customer-defined tables.
    BAPI_Table_Extensions are used for this integration into the standard
    tables from the price catalog. These are enhancement concept objects for
    BAPIs. SAP delivers them with the key elements, and customers enhance
    them for their own fields in appends. The method receives the
    Table_Extensions using the interface and then it can fill them. Once the
    entries are returned after the method has been called, they are mixed
    with the standard tables. If a customer wishes to update
    customer-defined tables, a user-defined update module can be called in
    the method and it will update the customer-defined tables.
    When the method is called, the changing parameters are empty. They may
    be filled in the method. They are used to provide customer-defined
    fields in the standard tables. If entries are made in these structures
    and tables, the 'entries_made' parameter must be set to 'X' so that the
    entries are transferred from these structures and tables to the standard
    tables in the price catalog. These parameters are BAPI table extensions.
    These structures can be enhanced in the customer system with APPENDS.
    This enhancement is exactly the same as the enhancement for the standard
    tables involved. The customer-specific fields are transexported to the
    standard tables after the method has been called using a
    MOVE_CORRESPONDING. This involves the enhancement technology that
    supports BAPIs in the standard system.
    Reward points if useful.
    Roger

  • How to use enhanced slideshow without .Mac

    (I am Japanese so my English is not good . Sorry)
    I read these iWeb's Discussions and I knew that we can use iWeb's enhanced slideshow without .Mac!
    I read some posts about that , but many links doesn't work and I can't found how to USE.
    So I want source code and, tell me how do I do.
    Please!
    iBook G3 & iMac G5   Mac OS X (10.4.8)   iPod 5G (Black)

    You might be interested in this:
    http://www.codemanic.com/blog-archives/000084.html
    Otherwise, email Cyclosaurus from his web page:
    http://www.geocities.com/[email protected]/

  • How to use Enhancement spot in program

    Hi gurus,
    now i am working ecc 6.0, so how to use Enhancement spot in program, can anybody explain step by step.
    Rewarded with points.
    Thanks
    Naveen

    Hi Naveen ,
    Enhancement Spot are available.
    Examples:
    -End of Executable Program, Include, Function group, Dialog module
    -Begin/End of Form routine / Function module / Method
    -End of a structure
    -End of Private/Protected/Public Section of a local class
    If you want to create Implementation , You have to right click on yellow color line and gve Zxxx and save it in any
    transport request under any dev class. Then you can write your own code and save it and activate it .
    Later If you want to Transport it you need to transport this request.
    Reqward if usefuil
    Thanks
    Jagadeesh.G

  • What are user exits & enhancements & how to use those .

    What are user exits & enhancements & how to use those .

    Hi,
    BADI , Customer Exit / User Exit , Enhancement all are same.
    Customer Exit & User Exit terms were earlier used in case of R/3. Now in ECC 6.0 they are known as
    BADI means Business Add-Ins.
    BADIs :
    Use:
    SAP provides multiple implementations of Business Add-Ins (BAdIs), which enhance the functions of the Configuration Control component.
    In addition, there are multiple empty BAdIs available for implementing a customer-specific logic for special functions.
    Pls. find listed below some important PP Enhancements / BADIs :
    Exit name   Short text
    PPAPO002 Publication of APO Data in Transfer from APO to R/3
    PPAPO003 Production Order R/3->APO: Check if Operation is APO-Re
    PPAPO004 Planned Order Conversion from APO: New BOM Explosion?
    PPAPO005 Enh. of Relationships in Proc. Order during Transfer to
    PPAPO006 Influencing Initial Supply of Manufacturing Orders
    PPAPO007 Overriding Checkbox Fields for Production Order APO ->
    PPAPO008 Override Order Type for Planned Order Conversion
    PPAPO009 Customer Exit for Addition of Components and Items
    PPAPO010 Filtering Components out of Quantity Propagation
    PPAPO011 Performance-Related Adjustment of Remaining Duration
    PPCO0001 Application development: PP orders
    PPCO0002 Check exit for setting delete mark / deletion indicator
    PPCO0003 Check exit for order changes from sales order
    PPCO0004 Sort and processing exit: Mass processing orders
    PPCO0005 Storage location/backflushing when order is created
    PPCO0006 Enhancement to specify defaults for fields in order hea
    PPCO0007 Exit when saving production order
    PPCO0008 Enhancement in the adding and changing of components
    PPCO0009 Enhancement in goods movements for prod. process order
    PPCO0010 Enhancement in make-to-order production - Unit of measu
    PPCO0012 Production Order: Display/Change Order Header Data
    PPCO0013 Change priorities of selection crit. for batch determin
    PPCO0014 Select process orders for external relationships
    PPCO0015 Additional check for document links from BOMs
    PPCO0016 Additional check for document links from master data
    PPCO0017 Additional check for online processing of document link
    PPCO0018 Check for changes to production order header
    PPCO0019 Checks for changes to order operations
    PPCO0020 Process order: Display/change order header data
    PPCO0021 Release Control for Automatic Batch Determination
    PPCO0022 Determination of Production Memo
    PPCO0023 Checks Changes to Order Components
    PPCP0001 P.Cost Planning: Additional Cost Elements for Person
    PPEACT01 Customer Fields at Mode D
    PPECMP01 Customer Fields for CMP Node
    PPECMP02 Customer Fields: CMP Variants
    PPEGEN01 General Engineering Node: Customer Fields
    PPEMPA01 MPA Customer Enhancement
    PPEMPO01 Customer Enhancement for Material Planning Object
    PPEMPO02 Customer Enhancement for Model
    PPERES01 Customer Fields at RES Node
    Alternately you can find User Exits / BADIs in TCode : SMOD ( SAP Enhancements)
    Hope this helps.
    Regards,
    Tejas

  • How to use Easy Enhancement Workbench (eew)

    Dear Sir,
    Can you advise how to use Easy Enhancement Workbench in CRM. ?
    Is it good tool or not.
    Plase advise.
    Thank you and best regard,
    Vimol

    The Easy Enhancement Workbench is a development environment with wizards, with which you can easily extend certain standard SAP business objects with user-defined data fields and tables. Customer Objects, such as database tables and screens, are created by a generator, and all customer exits are implemented. This functions system-wide, that is, when extending a CRM system you can also execute extensions in the connected SAP R/3 OLTP system.
    Some examples of the functions generated for the Easy Enhancement Workbench:
    <u>1. DDIC extensions</u>
    - Application table
    - Data elements and domains
    - Check table for fields
    - Search help
    <u>2. Interface (SAP GUI):</u> screens, function modules, entries in BDT control tables
    <u>3. APIs for reading, changing, deleting</u>
    To access the Easy Enhancement Workbench, use transaction code <b>eewb</b>.
    i get this information from CRM modul -> CR100
    Hope this information help u.
    Best Regards
    Indah Puspita.

  • How to use Extensionin, Extensionout FOR BAPI ENHANCEMENT

    Hi,
    I need to do the enhancemen for BAPI. I don't know how to do it.
    if there is any good procedure plz give me.
    Thanks in Advance,
    NV

    Hi ,
    In the EXTENSIONIN param Structure should be BAPI_TE_XXXXX(Which has the custom fields) .
    If you don't know one in se11 search with BAPI_TE_* , I am sure you will one which has ur fields.
    And then in Value part1 should have your data.
    For Ex. you want to send company code , asset no.
    first4 will be your comp code , Next 12 will ur Asset no .
    Please revert back if more help required.
    Also Check for similar work
    [Thread|Re: How to use BAPI]
    Rhea.

  • Real Instruments, Enhance Tuning, Enhance Timing, Etc?

    Hi,
    I am having trouble getting to the Real Instruments, Enhance Tuning, Enhance Timing, area of GB3.
    I see the window partially, but not enough to move the sliders, while seeing there placement..
    I'm sure there's something I'm unaware of to get the full view, and I've snapped a screen shot to show what I'm talking about, if anyone is interested..
    Thanks For Any Help,
    Eric

    Hang-
    I have a work around I kind of stumbled onto..
    http://members.aol.com/unkie/GB3-pict-2.gif
    After you select the Real Instrument track you'd like to correct the pitch or timing of, you hit the "I" for track information, then you can click on the region arrow,(?) and the Enhancing area opens up properly.
    Check out the picture linked above, and below I will place the before shot link..
    The preference not coming up seems to be linked to using iChat, believe it or not..
    I read it here in the forum.
    If you open iChat, and then Garageband 3, your preference pane may not open up, until you reboot your computer.
    Strange but true..
    HangTime, Thanks for "Hanging" in there with me through this dilemma..
    Take Care,
    Eric
    Before Link: http://members.aol.com/unkie/GB3.gif
    G4 Desktop (QuickSilver) Dual 1 Gig Processors Mac OS X (10.4.3) 1.5 Gigs of RAM

  • Enhance timing in garageband 3

    why does enhance timing not seem to work
    I follow the instructions but nothing happens.
    GB2 did the same.
    Any ideas?

    sorry i didn't reply got caught up .
    Figured it out. I was expecting the waveform to move -when i used my ears.... it did worked.
    thanks

  • Enhance Timing

    Im trying to Enhance the Timing, can anybody explain how to do it, the help menu is useless, cant work it out

    You mean the enhance timing function like in Garageband?
    Then look for "flex timing" or "Audio Quantizing" in the help menus. With Logic Express 9, this is very convenient.
    Cheers,
    Fox

  • Tutorial Announcement :: How To Use Auto Complete Text Form Control ::

    Hello Everyone...
    Here in this tutorial we gonna to learn a new and amazing feature of (ADDT), we will learn how to use Adobe developer toolbox (ADDT) form controls.
    Form controls help you to add a fantastic features to your forms, that helps you to expand the form abilities and functionality...
    The Auto complete Text Field is an enhanced text field that dynamically completes what you type with matched values from a table. You can also select the values from a list.
    You can use the Auto complete Text Field in user registration forms, such as allowing users to select their country or city easier, Also in other forms that needs the user to pick one of many choices without any difficulties.
    Requirements
    To complete this tutorial you will need to install the following software and files:
    Adobe Dreamweaver Cs3
    Adobe Developer Toolbox (ADDT)
    Don't forget: to try out the Demo type the first three letters :A - B - C
    :: Go To Tutorials ::
    :: Go To Tutorials ::
    Best Regards
    Waleed Barakat
    Developer-Online Creator and programmer
    http://www.developer-online.com

    Heya Waleed,
    I use spry to create an autocomplete form that works great across browsers that have javascript enabled. You can store info in a database and parse the info to xml for a dynamic approach. Take a look at the filter examples in spry.
    http://labs.adobe.com/technologies/spry/samples/data_region/NonDestructiveFilterSample.htm l
    http://labs.adobe.com/technologies/spry/samples/data_region/ZuggestSample.html

  • How to use group function in insert or update

    Hai All
    How can we use group function in insert or update statement
    I am generating an attendance so i have different set of timing for example
    0800,1200,1230, 1700 and i need to insert into these data into table with min value to intime and max value to
    outtime and othere to inertval time in or out
    Pls tell me with some example
    For example
    For INSERT
    insert into T2 (barcode,empcode,intime,attend_date)
                   values(r2.cardn,r2.enpno,MIN(r2.ptime),r2.pdate);
    For UPDATE
    update dail_att set outtime= MAX(r2.ptime) where empcode=r2.enpno and barcode=r2.cardn and
    attend_date=r2.pdate;
    Here instead of where i need to use having so pls tell how to use
    Thanks & Regards
    Srikkanth.M

    Hai Man
    R2 is not a table name its a record
    Let me explain clearly
    I have to generate daily attendance for lot of employees So i have two table t1 and t2
    T1 consist of three column empno,date,time
    T2 consist of empno,name,date,intime,outtime,intrin,introut
    So now i need to give the T1 Min value Of time to T2 Intime and T1 Max value of Time to T2 Outtime fields so there so many records while i am using
    max(time) it gives the max value of all so i seperated by group function so now i have an error in subquery ie it is an single row subquery so i need to use multiple row subquery how i can use multiple row subquery in update statement
    Thanks In Advance
    Srikkanth.M

  • In portlets, how to use a html form passing  values to the another page?

    it is well known that in web developing , we have two methods to pass values to another page.<!--
    1. passing values
    2.<form action="nextPage" method ="post"></form>-->
    but how to use two methods in oracle portal portlets?
    I have got a simple example which submit two values to the page for itself, means a page has a form with submit botton, user input the form with values and then submit them by submit botton, then the page recevice those values and show it .
    this example is powered by oracle ,
    please have a look at these code:
    <br><br>
    <%@ page contentType="text/html;charset=UTF-8" %>
    <%@page import="java.util.*, oracle.portal.provider.v2.*" %>
    <%@page import="oracle.portal.provider.v2.http.HttpCommonConstants" %>
    <%@page import="oracle.portal.provider.v2.render.PortletRendererUtil" %>
    <%@page import="oracle.portal.provider.v2.render.PortletRenderRequest" %>
    <%@page import="oracle.portal.provider.v2.render.http.HttpPortletRendererUtil" %>
    <%@page import="oracle.portal.provider.v2.url.UrlUtils" %>
    <%
    // The form submit URL refers to the current Portal page. All portlets
    // on this page share this URL. This means that the per portlet parameters
    // are in the same request. Portlets must ensure that its paramerters don't
    // collide either with other portlets or other instances of itself. This
    // is generally accomplished by using "fully-qualified" parameter names. A
    // fully-qualified parameter name prepends the (unique) portlet reference to
    // the parameter. The JPDK provides a utility to accomplish this.
    String portletParamName = "mName";
    String portletParamAge = "mAge";
    String portletParamSubmit = "mSubmit";
    String fName = HttpPortletRendererUtil.portletParameter(request, portletParamName);
    String fAge = HttpPortletRendererUtil.portletParameter(request, portletParamAge);
    String fSubmit = HttpPortletRendererUtil.portletParameter(request, portletParamSubmit);
    // These are the session attribute names used to store the current values.
    // Because all instances of this portlet share the same user session we must
    // also fully-qualify these names to avoid collisions.
    String sName = HttpPortletRendererUtil.portletParameter(request, "sName");
    String sAge = HttpPortletRendererUtil.portletParameter(request, "sAge");
    PortletRenderRequest pRequest = (PortletRenderRequest)
    request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
    String formName = UrlUtils.htmlFormName(pRequest,null);
    ProviderUser user = pRequest.getUser();
    ProviderSession providerSession = user.getSession();
    if (providerSession == null)
    %>
    Your provider session has been terminated or has timed out
    and you need to logout and then login to re-establish the session.
    <%
    else
    // Record, in session storage, the last values submitted.
    if (pRequest.getQualifiedParameter(portletParamSubmit) != null)
    providerSession.setAttribute(sName, pRequest.getQualifiedParameter(portletParamName));
    providerSession.setAttribute(sAge, pRequest.getQualifiedParameter(portletParamAge));
    %>
    <!-- Output the HTML content -->
    <center>
    <table width="70%">
    <tr>
    <td>
    <b>This portlet shows how to post and process information from HTML forms.</b>
    </td>
    </tr>
    </table>
    <form name="<%= formName %>" method="POST"
    action="<%= UrlUtils.htmlFormActionLink(pRequest,UrlUtils.PAGE_LINK) %>">
    <%= UrlUtils.htmlFormHiddenFields(pRequest,UrlUtils.PAGE_LINK, formName) %>
    <table>
    <tr>
    <td>
    <b>Name :</b>
    </td>
    <td>
    <input type="text" size="20" name="<%= fName %>" value="">
    </td>
    </tr>
    <tr>
    <td>
    <b>Age : </b>
    </td>
    <td>
    <input type="text" size="3" name="<%= fAge %>" value="">
    </td>
    </tr>
    </table>
    <br>
    <INPUT TYPE=submit name="<%= fSubmit %>" Value="Submit">
    </form>
    <%
    if ((providerSession.getAttribute(sName) == null)&& (providerSession.getAttribute(sAge) == null)) {
    %>
    <b>No values have been submitted yet.</b>
    <%
    } else {
    %>
    <b> Last submitted values:</b><br>
    <table>
    <tr>
    <td>
    <b>Name: </b>
    </td>
    <td>
    <b><%= providerSession.getAttribute(sName) %></b>
    </td>
    </tr>
    <tr>
    <td>
    <b>Age: </b>
    </td>
    <td>
    <b><%= providerSession.getAttribute(sAge) %></b>
    </td>
    </tr>
    </table>
    <%
    %>
    </center>
    <%
    %>
    <br><br>
    <br><br>
    <br><br>
    but I want to write the form in a page , and then show it on another page , how to write it ?
    I have read the pdk:
    oracle.portal.provider.v2.url Classes
    UrlUtils
    then I use these method , as this :
    //frist page:
    <br><br><br><br>
    <%@page contentType="text/html; charset=Big5"
    import="oracle.portal.provider.v2.render.PortletRenderRequest"
    import="oracle.portal.provider.v2.http.HttpCommonConstants"
    %>
    <%@ page import="oracle.portal.provider.v2.*"%>
    <%@ page import="oracle.portal.provider.v2.render.PortletRendererUtil"%>
    <%@ page import="oracle.portal.provider.v2.render.http.HttpPortletRendererUtil"%>
    <%@ page import="oracle.portal.provider.v2.url.UrlUtils"%>
    <%
    PortletRenderRequest pReq = (PortletRenderRequest)
    request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
    %>
    <P>Hello <%= pReq.getUser().getName() %>.</P>
    <P>This is the <b><i>Show</i></b> render mode!</P>
    this is a program to test the passing value
    <%
    String portletParamName = "mName";
    String portletParamAge = "mAge";
    String portletParamSubmit = "mSubmit";
    String fName = HttpPortletRendererUtil.portletParameter(request, portletParamName);
    String fAge = HttpPortletRendererUtil.portletParameter(request, portletParamAge);
    String fSubmit = HttpPortletRendererUtil.portletParameter(request, portletParamSubmit);
    PortletRenderRequest pr=(PortletRenderRequest)request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
    String formName=UrlUtils.htmlFormName(pr, null);
    %>
    <form name="<%=formName%>" method="post" action="<%=UrlUtils.htmlFormActionLink("/htdocs/passingvalues4/getValues.jsp")%>">
    <%= UrlUtils.htmlFormHiddenFields("/htdocs/passingvalues4/getValues.jsp") %>
    name:<input type="text" size="20" name="<%= fName %>" value="">
    p w :<input type="text" size="3" name="<%= fAge %>" value="">
    <INPUT TYPE=submit name="<%= fSubmit %>" Value="Submit">
    </form>
    //getValues.jsp<br><br>
    <br><br>
    <%@page contentType="text/html; charset=Big5"
    import="oracle.portal.provider.v2.render.PortletRenderRequest"
    import="oracle.portal.provider.v2.http.HttpCommonConstants"
    %>
    <%@ page import="oracle.portal.provider.v2.*"%>
    <%@ page import="oracle.portal.provider.v2.render.PortletRendererUtil"%>
    <%@ page import="oracle.portal.provider.v2.render.http.HttpPortletRendererUtil"%>
    <%@ page import="oracle.portal.provider.v2.url.UrlUtils"%>
    <% String portletParamName = "mName";
    String portletParamAge = "mAge";
    String portletParamSubmit = "mSubmit";
    String fName = HttpPortletRendererUtil.portletParameter(request, portletParamName);
    String fAge = HttpPortletRendererUtil.portletParameter(request, portletParamAge);
    String fSubmit = HttpPortletRendererUtil.portletParameter(request, portletParamSubmit);%>
    <html>
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=Big5">
    <title>untitled</title>
    </head>
    <body>
    Name:<%=fName%>
    Age :<%=fAge%>
    </body>
    </html>
    <br>then I deployed them on the portal , run it , the result is :after I submit it , the browser give me : http 404 page not found!
    [b]here is the provider.xml<br>[b[i]]<?xml version = '1.0' encoding = 'UTF-8'?>
    <?providerDefinition version="3.1"?>
    <provider class="oracle.portal.provider.v2.DefaultProviderDefinition">
    <session>true</session>
    <passAllUrlParams>true</passAllUrlParams>
    <portlet class="oracle.portal.provider.v2.DefaultPortletDefinition">
    <id>1</id>
    <name>PassingValues4</name>
    <title>PassingValues4</title>
    <description>PassingValues4</description>
    <timeout>60</timeout>
    <showEditToPublic>false</showEditToPublic>
    <hasAbout>false</hasAbout>
    <showEdit>false</showEdit>
    <hasHelp>false</hasHelp>
    <showEditDefault>false</showEditDefault>
    <showDetails>false</showDetails>
    <renderer class="oracle.portal.provider.v2.render.RenderManager">
    <renderContainer>true</renderContainer>
    <renderCustomize>true</renderCustomize>
    <autoRedirect>true</autoRedirect>
    <contentType>text/html</contentType>
    <showPage>/htdocs/passingvalues4/PassingValues4InputPage.jsp</showPage>
    <showPage>/htdocs/passingvalues4/getValues.jsp</showPage>
    </renderer>
    </portlet>
    </provider>
    <br><br><br>
    <br><br>
    would you kind enough to help me ? thanks!!!
    Message was edited by:
    moonsoft

    Hi Moonsoft,
    I have already answered this query in the other post at Re: how to link more than one links in portlet?(jsp develop)
    <form name = "showPageForm" method = "POST" action = "<%= UrlUtils.htmlFormActionLink(pReq,UrlUtils.PAGE_LINK) %>">
      <%= UrlUtils.htmlFormHiddenFields(pReq,UrlUtils.PAGE_LINK, "showPageForm") %>
      <input type="text" name="param1">
      <input type="text" name="param2">
      <input type="hidden" name="myPPN" value="/htdocs/page2.jsp">
    </form>then in your jsp code on page2.jsp, you will extract the parameters by specifying
    <%
      String p1 = request.getParameter("param1");
      String p2 = request.getParameter("param2");
    %>
    >>this is easy common jsp or asp development, but in oracle is too diffcult!!!!
    :-) .. there is a difference between web-applications and portlets, you just need to get used to it once. I hope this does clarify your doubts.
    thanks,
    Harsha

  • How to use search help in layout of se51

    how to use search help in layout of se51.

    Hi,
      One of the important features of screens is that they can provide users with lists of possible entries for a field. There are three techniques that you can use to create and display input help:
    Definition in the ABAP Dictionary
    In the ABAP Dictionary, you can link search helps to fields. When you create screen fields with reference to ABAP Dictionary fields, the corresponding search helps are then automatically available. If a field has no search help, the ABAP Dictionary still offers the contents of a check table, the fixed values of the underlying domain, or static calendar or clock help.
    Definition on a screen
    You can use the input checks of the screen flow logic, or link search helps from the ABAP Dictionary to individual screen fields.
    Definition in dialog modules
    You can call ABAP dialog modules in the POV event of the screen flow logic and program your own input help.
    These three techniques are listed in order of ascending priority. If you use more than one technique at the same time, the POV module calls override any definition on the screen, which, in turn, overrides the link from the ABAP Dictionary.
    However, the order of preference for these techniques should be the order listed above. You should, wherever possible, use a search help from the ABAP Dictionary, and only use dialog modules when there is really no alternative. In particular, you should consider using a search help exit to enhance a search help before writing your own dialog modules.
    Input help from ABAP dictoinary
    http://help.sap.com/saphelp_47x200/helpdata/en/9f/dbaa5435c111d1829f0000e829fbfe/content.htm
    Field Help on the Screen
    http://help.sap.com/saphelp_47x200/helpdata/en/9f/dbaa6135c111d1829f0000e829fbfe/content.htm
    Field Help in Dialog Modules.
    http://help.sap.com/saphelp_47x200/helpdata/en/9f/dbaac935c111d1829f0000e829fbfe/content.htm
    Regards,
    Vara

Maybe you are looking for

  • Is there "To Do" functionality in iCal 5.0  If So ... how?

    Wondering if there is a "To Do" function within iCal 5.0 that I'm missing. I would find it very beneficial and have to believe I'm just not finding it.

  • Is there any way to print to cheque via Tcode FCHN?

    Hi All, From Tcode FCHN, once the report is generated, i would like to print the "name of payee" ,  "Amount paid (FC)" and "Pmnt Date" to a cheque. For the "amount paid (FC)" which is in digits form, i would also need to convert into text/words. and

  • How to get the silverish white color in Java

    Hi I want to know how to get the silver color in Java I am currently using R , G , B setBackground(new color(255,255,255)); I am getting bright white color. How do I get the polished white(silverish white color) color. Thank You

  • Antlr.TokenStreamIOException - Weblogic 7.0.1 RH8.0

    I recently installed RH8.0 and Weblogic 7.0.1 on a spare desktop to           test our web site on a linux platform. We currently run on Solaris on           production and develop on our windows 2000 desktops using WL 7.0.1.           When I try to

  • Lead Reject Reason Code

    In the out of the box lead process in CRM OnDemand, when you click the reject lead button you are taken to an unconfigurable form and asked to enter a lead reject reason, when you click save this information is then appended to the end of the comment