Enhanced view class not calling

Hi,
I've enhanced a search view and redefined the search event handler method. But when i execute the application, it is not calling my enhanced view controller implementation class. the system always call standard view controller class. could anybody explain the reason for it?
Best Regards,
Kumar

Hi,
Check the enhancement set to client mapping in sm30 (BSPWDV_EHSET_ASG)..Enhacement set should be mapped to client in which you are running the application..
Also you can check in component_loading default implement, there it should read z-controller instead of standard class.
Cheers,
Sumit Mittal

Similar Messages

  • Excel Viewer: Class not registered (error -214722116​4)

    Hello,
    I am using the Excel examples shipped with Labview 8.21 to read from an Excel file and this works well. Now I need to do the same but on a PC that does not have Microsoft Office or Excel installed but only the free XLVIEWER (Microsoft Office Excel Viewer). When I try to change the ActiveX class of my reference to feed the 'Automation Open' vi I get the Class not registered (error -2147221164) although I can browse down to the XLVIEWER.exe and select it. Then I thought that maybe XLVIEWER had no ActiveX to communicate with other application; I thus installed a package called excelocx.exe, rebooted the PC but that did not change anything. I am still stuck with the same error.
    What am I doing wrong?
    Thanks a lot,
    Christophe

    Please find attached the VI I am using together with the XLS file that I try to read with Labview on a Pc that does not have MS Excel installed, only the XLVIEWER.
    OpenOffice is not supported in our company so cannot be considered as a valid solution.
    Thanks,
    Christophe
    Attachments:
    Read Excel File with Labview 820.zip ‏31 KB

  • Child class not called at run time labview

    I'm developing a large application using a few Class.
    In development mode, everything works fine.  When I build the application and run the executable, one of my child class is not called at all.  In some of the methods of that child class I have checked the option in "Window Appearance" to show the Front Panel when VI Load.  The VI show it self but is not executing.  The run button is in a state that indicate there is no top vi calling it.
    I have played whit Execution : Preallocated clone reentrant execution and General: Separate compiled code from source file.
    And I set them back to default.
    Two days lost trying to figure what append to my application.
    Please Help.
    Nitrof

    Hi Nitrof,
    Check out this excerpt straight from the NI Training Manual on object-oriented programming (image attached). There's a chance that the child classes aren't being included in the build. They need to be included somewhere in the application VI so that the Application Builder knows to include the class in the build.
    Also check out this forum that sounds like it's describing a similar problem: http://forums.ni.com/t5/LabVIEW/Problems-with-dyna​mic-class-load-in-executable/m-p/2139116
    Hope this helps!
    Alexandra
    National Instruments
    Applications Engineer
    Attachments:
    Forum1937225.png ‏146 KB

  • Capture comp controller event n enhancement view - handler not triggered

    Hi,
    Enhanced a std WDA component through the enhancement framework.  Added a view in the enhancement.  This view will be a popup requesting user supplies more details.
    Ive enhanced a std component controller method to fire off a component controller event.  Ive also created an event handler method in the new view and associated with the component controller event.
    Unfortunately the new view method doesnt trigger.  If I add an event handler method to one of the std views through the enhancement framework it does trigger.
    Grateful for any solution/info, cheers!

    Hey,
    Std view A is the active view when the firing of the event occurs within the component controller.  Enhancement view Z is where the event handler method is defined.Defining an event handler method in active view A will be triggered upon component controller event firing, but not event handler method in view Z.  Handling within event view Z (not active/displayed) beyond the realms of WDA eventing?

  • Enhancement view does not appear in my list of views

    Hi ,
    I have created an enhancement and now I used the wizard to add a new view to this application.The view created does not appear in my list of views but it appears in my Z BSP application.
    Please help!
    Regards
    Shilpi

    Check whether you are in Enhanced Version of UI Component !  (Original UI CMP name and Enhanceset : Z*)
    Thanks
    Allot points if this helps !

  • Shutdown class not called?

    I'm using WLS 8.1.0.0 (no SP) on Solaris.
    It appears my shutdown class, which implements T3ShutdownDef, doesn't get called
    at all during shutdown, "graceful" or not. Here is the entry in config.xml:
    <ShutdownClass
    ClassName="my.package.MyShutdown"
    Name="MyShutdown" Targets="MyServer"/>
    The first line MyShutdown::shutdown is
    System.out.println("[MyShutdown::shutdown] called.");
    I don't see it or anything else following this.
    TIA,
    Bill

    Hello
    I was expecting to be able to do clean-up (using a
    shutdown hook) when my application was terminated by
    a ctrl-c with the following code. But if the process
    is busy doing something (and not sleeping as is the
    case in all examples I've been able to find) the VM
    will not run it's hooks, so it seems.
    Am I missing something??
    public class ShutdownHook
    public static void main(String[] args)
    Runtime.getRuntime().addShutdownHook( new
    ook( new Thread() { public void run() {
    System.out.println("shutdown"); }});
    for (int j = 0; j < 10000; j++)
    System.out.println("run");
    // if the sleep is uncommented ctrl-c
    ented ctrl-c will work (99% of the time or so)
    // Thread.sleep(100);
    Regards,
    JesperHow are you able to hit ctrl-c before that application exits? The loop without a sleep will execute in less than one second.
    Kaj

  • BSP view is not calling

    Hi all,
    I had copied bsp HRRCF_PERS_DATA INTO ZRRCF_PERS_DATA , ALONG WITH THE CLASSES.
    to generate URL i created and entry in the table T77RCF_LOG_APPL.
    After that i ran my URL and just got the OTR text personal data.
    but below there is no view called.
    below is the mehtod in the class    zCL_HRRCF_PERS_DATA_MAIN_SA.
    if i use the standard class    CL_HRRCF_PERS_DATA_MAIN_SA then its calling the standard application.
    i'm just getting the blank view.
    method set_standalone_controller.
      check exist_exception( ) eq false.
      url-application = 'ZRRCF_pers_data'.
      url-url = 'persdata_m.do' .
      url-comp_id = 'persmain'.
    endmethod.
    can you please help me to get this resolve.
    regards,
    nikita

    Hi Jamie,
    WebDynpro context behavior is different at run-time. UI elements holds value in contexts. For a context node of cardinality 0..1 or 0..n the occurrence of node element at run-time is 0 i.e. there is nothing to hold the value and the UI element doesn't allow input any values or literally disabled.
    Solution 1: The node with 0..1 or 0..n must be created before the UI is shown or accessing it.
    wdContext.node<MyNode>().createAndAddMyNodeElement();
    Solution 2: simply change the cardinality of the node to 1..1 or 1...n which will ensure the minimum occurrence of the node at run-time is always 1.
    cheers,
    Nikhil Bose

  • GET_V Method is not called for custom field

    Hi,
    We are using CRM 7.0
    I have enhanced component BT120H_CPL and added custom fields into view Details with AET. I am trying to implement search help which depends on another field. I have created V-GETTER for my field and tried to implement search help in this method. However, this method is not called in the program scope.
    I have debugged the application and result is :
    V_GETTER method GET_V_ZZAFLD00000D is created in class ZL_BT120H_C_DETAILS_CN00. It should be called from GET_V_S_EXT method but this method is called in class CL_BT120H_C_DETAILS_CN00 and exception occurs since GET_V_ZZAFLD00000D doesnu2019t exist in class CL_BT120H_C_DETAILS_CN00.
    I tried similar scenario : add search help to existing field of another component. However I couldnu2019t able to run GET_V method again.
    ( It works when I write search help id in the AET but in this way I cannot pass import parameter to it )
    Is there anything I am missing ? Thanks in advance for helps.
    Regards
    Abdul.

    Hi,
        Then, the next possible thing is checking the "enhancement set". Press F2 keeping the cursor on any field and check if the view is showing up as enhanced. Find this information under "Active Enhancement set" in the popup details. If this does not happen, then your enhanced view is not being used. You may want to check the COMPONENT_LOADING BADI if you are using more than one assignment set. You may also want to look at this WIKI.
    [http://wiki.sdn.sap.com/wiki/display/CRM/HowToEnhanceaWebUIComponentinSAP+CRM]
    Regards,
    Arun Prakash

  • Call methods from view controller to another (enhanced) view controller!

    Dear All,
    Is it possible to use/call methods from view controller to another (enhanced) view controller? Iu2019ve created a view using enhancement in standard WD component. I would like to call one method from standard view controller in the enhanced view controller.
    Is it possible to include text symbols as enhancement in standard class?
    u2026Naddy

    Hi,
    If you have just enhanced an existing view then you can call the standard methods in one of the new methods which you will create as part of enhancement.
    If you have created a totally new view using enhancement framework option ( Create as Enhancement ) then in this new view you won't be able to use existing methods in other view as a view controller is private in nature. So all the view attributes, context nodes and methods are Private to that view only.
    Regarding text elements, I guess adding a new text element is just a table entry in text table and is therefore not recorded as enhancement.( Not very sure about this, need to double check )
    Regards
    Manas Dua

  • Can we get  reference of WD component in custom class of enhanced View cont

    Dear Member,
    We are enhancing WD component. We need to get a reference of WD component in custom class of enhanced View controller (post exit) so that popups can be triggered or URLs can be called?. How should we get reference of WD component? I need to know cons of our approach.
    ...Naddy

    Hi,
    Create one static attribute in your custom class with type ref to of your component and populate this attribute in webdynpro enhancement and then use this reference in your custom class.
    Regards,
    Pon Murugesh

  • For weeks I have been viewing a doggy day care via their web cam.  This weekend I upgraded to Lion and have been unable to view the center since.  I get an error message for java webcam class not found.  All of my software is up to date--suggestions?

    For weeks I have been viewing a doggy day care center via their web cam.  This weekend I upgraded to Lion and have been unable to view the center.  I get an error message for Java plug-in 1.6.0_29 ....webcam class not found.  Any suggestions on how to fix this?

    Sorry, don't know what else to suggest unless there's a URL to the problem stream that someone here can try. Otherwise we can't test it to try and determine what might be wrong.
    BTW, make sure they're testing it with a Mac, not with a Windows system. If they test only with Windows, what they say is or is not working doesn't mean much.
    Regards.

  • [svn:fx-trunk] 16929: Add a [Mixin] class that will register the required class aliases in the event the mxml compiler generation   [RemoteClass(alias="")] code is not called because an application does not use the Flex UI framework .

    Revision: 16929
    Revision: 16929
    Author:   [email protected]
    Date:     2010-07-15 07:38:44 -0700 (Thu, 15 Jul 2010)
    Log Message:
    Add a class that will register the required class aliases in the event the mxml compiler generation  [RemoteClass(alias="")] code is not called because an application does not use the Flex UI framework.
    Add a reference to this class in the RPCClasses file so it always gets loaded.
    QE notes: Need a remoting and messaging regression test that doesn't use Flex UI.
    Bugs: Watson bug 2638788
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/rpc/src/RPCClasses.as
    Added Paths:
        flex/sdk/trunk/frameworks/projects/rpc/src/mx/utils/RpcClassAliasInitializer.as

    Great exercise to document the problem like this.  It got me thinking about how an app with modules would be different from an app that does not use modules.  Solution: I moved the dummy reference of PersonPhotoView out to the main application file (as opposed to being inside the module) and it worked.  I've probably been lucky not to have experienced this problem earlier, because for most other entities I have an instance attached to my model which is linked / compiled with the main application.

  • Class Not found : oracle.jdbc.driver.OracleDriver when calling web service

    Hi,
    I have installed the Oracle Data Integrator Public Web Services on Apache Tomcat 5.5 application server with Apache Axis2
    When I try to call the web service OdiInvoke using the operation "listScenario" using only the JdbcDriver as input parameter, the response I get back from the web service call is:
    java.lang.ClassNotFoundException: Class Not found : oracle.jdbc.driver.OracleDriver
    Using the operator "getWebServiceVersion" I get a successfull response back som the connection seems fine.
    Obviously the error has to do with the driver not beeing available but where should I put the driver? Or how do I make it available? When working from Topology Manager, all connections are fine.
    Best regards
    M

    Solved it on my own by putting ojdbc14.jar in the following directory: <Apache-Tomcat install dir>/webapps/axis2/WEB-INF/lib/
    Thought I'd share in case some one else has same issue
    /M

  • Global class event handler not called

    I am having a problem where I created a function module that instatiates an application log class. This application log class has methods ON_* for public events of other classes.
    The function module then processes its routines and as a result some of these events are raised. Ex: The function module creates a Purchase order and in that class I have a public even PO_CREATED that is raised upon succesfull creation of the PO. The global class APPLICATION_LOG I created has a method ON_PO_CREATED for event PO_CREATED of class ZCL_MAT_PO.
    I put a break point in the APPLICATION LOG method but is os not called.
    ANy idea of what Iam doing wrong or missing?
    Thanks,
    Leo

    Hi Leo, did you set the handler method?
    SET HANDLER <method_name> FOR <object>.
    Regards,
    Rich Heilman

  • Contract Account Custom view not called when replicating thru CRM

    Hi All,
    We have modified the Contract account screen through BDT.
    Functionality -
    We have a custom table, that needs to be updated during contract account creation when reference contract account is used for creation.
    The update is successful when creating contract account via ISU, but when creating thru CRM, the custom view is not getting triggerred.
    I have checked in debugging as well, the process flow triggered via CRM is different than that from ISU. When Business Agreement is created via CRM, neither of PAI / PBO event is triggerred defined for the custom view created in BDT.
    When we have the custom field passed from CRM, it is getting updated correctly, but if the field is not passed from CRM view and we are updating using code logic in BDT modules, it is not successful.
    Could you please help in case I have missed on some config or is there any alternate way to get the custom requirement achieved.
    The requirement is to have custom table updated in both Create and Change mode.
    Thanks in Advance!!
    Regards,
    Rajesh Popat

    Hi Siva,
    Contract Account was replicating correctly for the ISU system. The issue was, we want to update some custom fields that are not passed as a part of CRM data, but using BDT and some validations, we were trying to populate that field and also update the custom table and link the same to sub screen attached for the contract account screen.
    The issues is now resolved. The custom view is getting triggered through CRM. There was some config missing for the BDT.
    When using BDT, only the PAI module gets called for all the views defined for the BDT.
    Thanks!!
    Regards,
    Rajesh Popat

Maybe you are looking for