Enhancement for PO creation in EBP

Hi ,
When I create a PO and shopping cart in EBP,the Goods recepient is not transferred to R/3.
Can anyone suggest a proper user-exit/BADI to transfer this to R/3 while creating PO in EBP?
Thanks,
Sandip.

Hi Sandeep,
Are you using Extended Classic scenario ?
There are few BAdIs available and can be used for it.
Normally, if it Extended Classic scenario, PO is replicated in R/3. If it is a local scenario, PO is created in SRM.
There is a BAdI which is responsible for Switching on / off Extended Classic Scenario.
BBP_EXTLOCALPO_BADI
Also there may be requirement to change Logical System. Use BAdI BBP_DETERMINE_LOGSYS for this.
If you have any question related to Shopping Cart Workflow ( Header Based or Itembased) / Contract Workflow, please drop me a mail.
Thanks and Warm Regards.
Pras Durafe

Similar Messages

User exit/ enhancement for billdoc creation using external billdoc number

good day experts,
my requirement is to allow assignment of external billing document. we have no problem with sales document and outbound delivery number. but for billing document, it seems no possible without user exit. I want to know the user exit for this and if I need to request for devkey upon modifying this user exit? or just create an enhancement point?
thank you in advance!

Refer to the reply from Brad.
SAP IMG documentation reads,
Number assignment
Specify a number range for number assignment. For billing documents numbers can
only be assigned internally by the SAP System. To define a common number
assignment for different billing types, you have to specify the same number range
in each case.

Badi / Exit / Enhancement for replacing INSMK during PO creation

Hi Gurus,
we want to default the INSMK field (stock type) during Purchase Order creation..
Can someone help me findind the right BAdI / exit / enhancement for it?
Thanks in advance,
Regards,
Alessio

Hi Alessio,
You may check these first:
Re: Negative postings to MVER table
Re: select stock type
Thanks,
Gordon

User exit for PR creation

Hi expert,
Are there some user exit that i can used for PR creation? I need this exit to set default value for certain field at item level when create PR.
Please advise.
Thanks
Message was edited by:
ari harsyanto

Hi,
Have you checked the components of enhancement: MEREQ001?
Please check. Hope this helps.
Best Regards, Murugesh AS

Enhancement for VL32N

Hi,
In vl32n transaction when we save the particular inbound delivery
I want to perform material to material transfer posting by triggering MIGO transaction and changing the batch number .
Can u suggest any enhancement for this requirement?

Hi,
Check if any of the following are useful to you:
V02V0001 Sales area determination for stock transport order
V02V0002 User exit for storage location determination
V02V0003 User exit for gate + matl staging area determination (h
V02V0004 User Exit for Staging Area Determination (Item)
V50PSTAT Delivery: Item Status Calculation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50R0001 Collective processing for delivery creation
V50R0002 Collective processing for delivery creation
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50S0001 User Exits for Delivery Processing
V53C0001 Rough workload calculation in time per item
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53W0001 User exits for creating picking waves
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
Regards,
Renjith Michael.

Enhancement for bin to bin stock transfer

hi,
when i am using stock transfer bin to bin using LT01 transaction, an information message have to raise when same material/batch if destination bin already having.........
i already searched enhancement for above process "MWMTO001" i am correct or not?
Thanks
Muthuraman.D

Yes, that's correct. You are using the right enhancement.
It has the LTAK and LTAP tables which is the transfer order tables. This function will trigger during the TO creation.

Are there any standard web dynpro ABAP or JAVA for material creation(mm41)?

Hi SDN,
I have got the requirement to provide Web Dynpro application for material creation (transaction code is MM41) and I would prefer to enhance standard Web Dynpro more than develop from scratch. Now I got only the Web dynpro ABAP component for create sales order called "LO_OIF_MAIN_COMP" and GUI HTML for purchasing order that come with business package Eh4.
Anyone who know please kindly help me.

>but I afraid that I'm not able to find out what is its component name from application
You could just lookup the WD Application in SE80 and then it will show you the component name. From SE80 choose Edit Object from the toolbar. Go to the Web Objects tab in the dialog. Type in the WD Application name and hit enter. You will then see the details of that application.

Need enhancement for KS01 Transaction for Department Filed

Hi Gurus,
Iam having a requirement on KS01 transaction to find enhancement for Department field.
Here I could not find any enhancement Exit to proceed further.
Please let know is there any alternate solution:
Here is my comlete rquirement below:
1.Make the u2018Departmentu2019 field, (CSKSZ-ABTEI), mandatory in the Cost Centre Master Record using   screen program name SAPLKMA1 and screen number 0300.
2.Check the entry made in the u2018Departmentu2019 field, (CSKSZ-ABTEI), in the Cost Centre master record
When the transaction KS01 is saved check the value in the u2018Departmentu2019 field, (CSKSZ-ABTEI), against values stored in a variable in a Z table by Controlling Area, if matched allow creation, if no match go to the first message below.
3.Department field is not allowed to be changed once postings have been made to the Cost Centre.
Check for transaction KS02 or KS12 when save check if u2018Departmentu2019 field has been changed, if no change continue, if changed check to see if postings have been made to the Cost Centre (table COEP), if postings have been made give the second error below, if no postings allow changes to be saved.
Thanks & Regards
Bhaskar

Hi,
    Check following User Exits in SMOD all are for KS01.
Exit Name           Description
COCCA001            Customer enhancement to cost center authorization checks
COCCA002            Customer Functions for Organizational Authorization Checks
COOMEP01            CO-OM: Information system -> line item reports
COOMKA01            Customer Fields for Cost Element Master Data
COOMKS01            Customer Fields for Cost Center Master Data
COOMKS02            Cost Center: Checks When Saving
COOMKS03            Cost Center: BAPI Enhancements
COOMLA01            Customer Fields for Activity Type Master Data
Salil....

Exit for PR creation

Hi,
The requirement is as below
We have added some zfields in shopping cart at item level.
These fields are transferred to R/3 and hence the z field data comes in the customer data tab of the PR.
Now, there needs to be one special condition checked. If one of the field is X -> mark the item as deleted
ie
if zfield1 = 'X' -> loekz = 'X'
I have used MEREQ001 for getting the zfields data in PR. I am getting all this data in PR.
But when I used the check if zfield1 = 'X' -> loekz = 'X' in this exit, deletion indicator is not set.
Can anyone please provide some exit for PR creation which can help to update the standard field based on the value of zfield at item level.
Thanks
Richa

AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a G
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requisn.
M06E0004 Changes to communication structure for release purch. doc.
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., preview)
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing document
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order

BAPI for Payment creation in Claims

Hi Experts,
I need to create payment for Claims need BAPI, please help me and also please refer ICLCDC02 t-code for payment creation as reference.
Screenshot is attached.
Regards
goudham

ICLF_CD_STD_LOCAL - implementation if the disbursement is through FSCD
The std BAdi ICLF_CD can be enhanced to pass additional data to FSCD to facilitate the processing of payments by coverages and accurately reflect the FI postings to SAP FI. This BAdi can transfer the following data to process payments;
Claim Number
Document number
Document date
Posting date
Business Partner
Contract Number
Main and sub Transactions
Assignment number

Duplicate check on search term for BP creation in CRM

HI,
I want to do a duplicate check on search term for BP creation in CRM.
i found one BADI ADDRESS_SEARCH. But the method address_search is not getting called.
Is there any other BADI available? how can I handle this issue?

hello,
BP is BDT (Business Data toolset) enabled (you can check it by adding break point in FM BUS_PBO and executing BP transaction). You can add your check directly to standard view (the check will be executed each time when user pushes enter) or you could add you check to appropriate action (during saving etc.) there are number of actions which you could use it depends on your requirements. You can find a lot of info about BDT (if you are not familiar) in Wiki.
br,
dez_

Functional module for automatic creation of pur requisition & pur order

hello,
what is the functional module for automatic creation of puchase requisition and automatic creation of purchase order which we will assign in action box in service order processing management.
please let me know as early as possible
regards,
rajesh kumar raju

Hi,
Please check with following.
IDOC_INPUT_ACC_PURCHASE_REQUI
IDOC_INPUT_ACC_PURCHASE_ORDER
/ISDFPS/OR_PURCHASE_ORDER_CR
BS01_PURCHASE_DOCUMENT_CREATE
CO_MP_CREATE_PURCHASE_ORDER
Thanks & Regards
Sadhu Kishore

Suggest EnhanceMent For SALES area determination In stock Transfer.

Suggest EnhanceMent For SALES area determination In stock Transfer.
V02V0001 Sales area determination for stock transport order Doesnt Work,

Is user exit required, as the sales area will be different. Incase of Intra company stock transfer the process will be as under:
Create Purchase Order (ME21N)
Create Delivery in background (VL04, VL10a, VL10C, etc)
Change Delivery for picking / packing & PGI (VL02n)
Create Billing Document (VF01)
Assumption: Stock Transfer configuration is in place. Assistance can be taken from SAP Best Practices in help.sap.com
Incase of Inter-company, the process will be as under:
Create Sales Order (VA01)
Create Delivery (VL01N, etc)
Change Delivery (VL02N)
Create Billing Document (VF01)
Assumption: Configuration is in place. Assistance can be taken from SAP Best Practices in help.sap.com
Regards,
Rajesh Banka

Table for Plant Creation Date

Hi,
Can anyone tel me the table name for Plant Creation date .?
I searched in SDN but DBLOGTAB in my case has ZERO entries .Is thr any other way ?

Hello,
So i hope you get the reason why your are not getting the table changes in DBTABLOG
You should take help of the basis team for doing this. PLease go through the SAP documentation for details:
[http://help.sap.com/saphelp_nw04/helpdata/en/7e/c81ec852c511d182c50000e829fbfe/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/7e/c81ec852c511d182c50000e829fbfe/content.htm]
[http://help.sap.com/saphelp_nw2004s/helpdata/EN/32/a479f0e083fc4386e66380e932497e/content.htm|http://help.sap.com/saphelp_nw2004s/helpdata/EN/32/a479f0e083fc4386e66380e932497e/content.htm]
BR,
Suhas

Table for Reservation creation Date

All SAP Gurus,
What is the Table for Reservation creation Date?
Regards,

Hi Vijay,
Thanks for reply.
Tables yiu have recommended do not have the reservation creation or updation date.
Please correct me if I'm wrong.
Regards,

Enhancement for PO creation in EBP

Similar Messages

Maybe you are looking for