Enhancement point is not processed in Q-System

We are using SAP SCM 7.0, based on NW 7.0 EhP 1.
In the development system we created a new enhancement point (implicit) where everything works fine.
After transport to Q system no enhancement point is processed although the coding is there and listed as 'active'.
BAdI implementations are processed, though.
Do you have a general advise what could be wrong?
We don't have a switch for this Z enhancement.
Thanks,
Michael

Hi Michael, 
 
I haven't encountered this problem yet, but there's reports in the forum that another activation helped, e.g. see this thread Implicit Enhancement Code not wrking after transport (and if you do a search you'll find more reports like that). People, who encountered this issue, seem to usually say that during debugging the enhancement code doesn't show up, though in the editor it is visible and marked as active. 
 
Cheers, harald

Similar Messages

PSD Asset not processing into system?

Hi,
I'm working with Extract for the first time today. With the first, small and straight-forward file the system worked beautifully. However, with subsequent attempts to work with larger and more complex PSDs, not only does it seem that they are not processing into the system (no thumbnails in Assets view), but when I try to view the file in the Extract view, the system attempts to process them and then fails at 34% each time.
I have confirmed that there are fewer than 1000 layers in these files (up to 833). However, there are commas in the layer names, which is triggering issues in the Extract Assets process within PS itself.
Could you help me troubleshoot what's going on here?
Thanks in advance.

Sure... we're always interested in files that don't process because our target there is zero :-)
Since I don't have access to these failing files you would need to explicitly share them with us for investigation. If it's something that you can share, you can do so by choosing "Send link" from the dropdown and then choosing "Create public link." That will create an (unlisted) link that you can then share via PM or even here in the forum if you choose.
Thanks,
-Mitch

SAP note - delete enhancement-point

hi,
I would like to implement a note ("992605"). In this note there were some correction instructions (e.g. "ES_MRYF_COMMON_ROUTINES_ALV"; Objecttype ENHS). If I open the link to the object (click on objectname), there are no details what to do. Now what should I do?
If I open the object-link to "MRYF_COMMON_ROUTINES_ALV" in the note, I get the information to delete following line (include MRYF_COMMON_ROUTINES_ALV) :
ENHANCEMENT-POINT MRYF_COMMON_ROUTINES_ALV_01 SPOTS ES_MRYF_COMMON_ROUTINES_ALV INCLUDE BOUND.
It's an enhancement-point which I can't delete because it's not modifiable (Info: ("Components of enhancements and sections cannot be modified"). What should I do?
Thanks Michael

Hello Michael,
Does the note state that you are supposed to perform this action manually? If not, then why are you not using SNOTE to have the note applied automatically to your system?
Just go to transaction SNOTE, download the note and then mark it and click implement note. That should do it.
Regards,
Michael

The following error text was processed in the system IDS : Access via 'NULL' object reference not possible.

Hi all ,
Im getting the below error , actually recently i created my own custom table zstudent, later i wrote select query to fetch data from the same and dump at internal table and then bind this to the table node.
But im getting below error, even i removed the select query still same error is occuring.
Error when processing your request
What has happened?
The URL http://********00.*****b.com:8000/sap/bc/webdynpro/sap/zdemo_student/ was not called due to an error.
Note
The following error text was processed in the system IDS : Access via 'NULL' object reference not possible.
The error occurred on the application server axsids00_IDS_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: WDDOINIT of program /1BCWDY/YUSM2Q74A826Y0JY1I4V==CP
Method: IF_WDR_COMPONENT_DELEGATE~WD_DO_INIT of program /1BCWDY/YUSM2Q74A826Y0JY1I4V==CP
Method: DO_INIT of program CL_WDR_DELEGATING_COMPONENT===CP
Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
Method: INIT_CONTROLLER of program CL_WDR_COMPONENT==============CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: INIT of program CL_WDR_CLIENT_COMPONENT=======CP
Method: INIT of program CL_WDR_CLIENT_APPLICATION=====CP
Method: IF_WDR_RUNTIME~CREATE of program CL_WDR_MAIN_TASK==============CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP

Thanks Rama,
Acutally i accidentally commented the lo_nd_student = wd_context ....etc
this line was commented .
i have one small requirement to fetch data from local customised table and fill the same to internal table and bind that to table node.
my table node is student having attributes as name , city and number , all are of type strings.
now i created one custom table zstudent having ID - char of length 10,
name of type string
city of type string
num of type string
i have inserted records
but when i use select query to fill data from this zstudent to my internal table of type lt_student type wd_this->elements_student ,
im getting same above error.

Enhancement point in FM RV_INVOICE_DOCUMENT_ADD not updating ZUONR

Hi,
I am working with FM RV_INVOICE_DOCUMENT_ADD.
inside the FM, I have an enhancement point rv_invoice_document_add_15 SPOTS es_saplv60a.
Here I am setting the value of ZUONR by a custom value. This perhaps should update table VBRK for the corresponding VBELN.
however, it is not updating..
This is my code....
zvbrk ] = xvbrk [.
sort zvbrk by zukri.
sort xvbrk by zukri.
loop at zvbrk into k_vbrk.
l_index = sy-tabix.
k_VBRK-ZUONR = k_vbrk-zukri.
k_vbrk-updkz = 'U'.
modify xvbrk index l_index from k_vbrk transporting zuonr updkz.
endloop.

Hi,
Can you tell that how had you solved this issue?
Thanks

The State System message file processing could not process

Hi
We have Windows server 2008R2 SCCM 2012 R2 CU3 SQL 2008 R2.
Every 15-19 minutes I got two errors in State messages ID6104 (The State System message file processing could not process file 'HI6DYYB8.SMX' and moved it to the corrupt directory. Review the statesys.log file for further details.), 6105 (The State System
message file processing processed one or more files that contained errors or invalid data. Review the statesys.log file for further details.). It started on Monday.
Also on server in statesys.log
SQL MESSAGE: spProcessStateReport - Record 1 failed processing with error -50010:
SMS_STATE_SYSTEM 26.02.2015 07:11:30
9880 (0x2698)
CMessageProcessor - Non-fatal error while processing HI6DYYB8.SMX
SMS_STATE_SYSTEM 26.02.2015 07:11:30
9880 (0x2698)
STATMSG: ID=6104 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_STATE_SYSTEM" SYS=server.fqdn SITE=MYSITE PID=3744 TID=9880 GMTDATE=ce feb 26 05:11:30.119 2015 ISTR0="HI6DYYB8.SMX" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_STATE_SYSTEM 26.02.2015 07:11:30
9880 (0x2698)
Thread "State Message Processing Thread #0" id:9880 was unable to process file "D:\SCCM_prog\inboxes\auth\statesys.box\process\HI6DYYB8.SMX", moving to corrupt directory.
SMS_STATE_SYSTEM 26.02.2015 07:11:30
9880 (0x2698)
total chucks loaded (0) SMS_STATE_SYSTEM
26.02.2015 07:11:30 9880 (0x2698)
What could cause this messages to appear?

That just indicates that a state message sent by a client was somehow corrupted. You can examine the .smx that was moved to the corrupt-box, but it's not unusual that it happens.
Torsten Meringer | http://www.mssccmfaq.de

Ur mount point have not more space and ur system table space is full how u

ur mount point have not more space and ur system table space is full how u resize or add file . u have not other mount point .what steps u follow

Answers in your duplicated thread: Some inter view Questions Please give prefect answer help me
You can get all the answers at http://tahiti.oracle.com.
You understimate job recruiters, a simple crosscheck is enough to discard people with experience from people who memorize 'interview answers'.
Don't expect to get a job just because you memorize answers for 'job interviews', get real life experience.

Import note - enhancement-point

hi,
I would like to implement a note ("992605"). In this note there were some correction instruction (e.g. "ES_MRYF_COMMON_ROUTINES_ALV"; Objecttype ENHS). If I open the link to the object (click on objectname), there are no details what to do. Now what should I do?
If I open the object-link to "MRYF_COMMON_ROUTINES_ALV" in the note, I get the information to delete following line:
ENHANCEMENT-POINT MRYF_COMMON_ROUTINES_ALV_01 SPOTS ES_MRYF_COMMON_ROUTINES_ALV INCLUDE BOUND.
It's an enhancement-point which I can't delete, because it's not modifiable. What should I do?
Thanks Michael

Hello Michael,
As this note is quite complex (it modifies ENHO and ENHS objects) why do you want to implement it manually? If you use the transaction SNOTE, it will be done automatically.
Please implement note 875986 first that corrects all the SNOTE problems.
Regards,
Walter

An Error Occurred While Processing Your Request We're sorry. While processing your request, we encountered a system-related error. Your request was not processed. Error ID Code: b7bc5afa-ce52-434b-bfb6-3fb086b77a23

Every time i log out of my Bank email after getting a copy of transactions, I get the following:
An Error Occurred While Processing Your Request
We're sorry. While processing your request, we encountered a system-related error.
Your request was not processed.
Error ID Code: b7bc5afa-ce52-434b-bfb6-3fb086b77a23
If the error continues or you need to contact support, please provide them with the Error ID Code above.
That's what I am doing. contacting support.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"

End Routine and test on a field not present in target system

Hello,
I find an issue in testing a field present in the ODS source system, using a Transformation.
More exactly, I do not have a field that I need to test in my end routine because I can't find it in the RESULT_PACKAGE structure (because it is not present in the target Cube). In BW 3.x I solved this problem with an enhancement in the communication structure of my ODS and using a start routine.
Any idea for a Transformation?
Many thanks in advance for your kind support.
Regards,
Giovanni

Hello and thanks for your reply.
I have two conditions to implement.
1) Fill some fields of the Cube, NON present in my ODS.
2) Condition on one filed of my ODS (filed NON present in the Cube) for filling some field of the Cube.
In my tys_SC_1 structure of the start routine I find all fields of my ODS and the fields that I need to check but I need to check this filed in one point of my process and set a filed in my Cube (filed not present in my ODS), not present in the tys_SC_1 structure of the start routine.
I hope to have described in a better way may issue.
Any idea?
Thanks.
Giovanni

SRM 7.0 Contract not replicating to backend system

Hi,
We have created CCTR global outline agreement in SRM 7.0 extended classic scenario. the contract is not replicating into backend. we have maintained necessary message types BLAORD, COND_A in ECC system as inbound parameters for partner type as SRM system.
when i looked rz20, i am seeing the message as "back end data could not be read"
When I executed function module B46B_CTR_TRANSFER I am getting an error, RFC destination could not be found.
please let me know what we are missing.
thanks
vem

"Hi,
I guess your SRM70 connected to backend ECC with EHP4 pack applied. If so, Central contract will not use IDocs instead it works on new eSOA technology where Xi/PI need to be set up to process service calls.
If you are not using EHp 4 pack on your ECC, then SRM70 use IDocs to distribute contracts to backend.
Thanks,
Jagadish
Hi jagdish,
we are on SRM 7.0 and ENHPack 4.0 and as you said its picking up the eSOA route to distribute contracts in backend ECC system.
I would like to know how can we this programmatically ( BADI / Enhancement points) and force system to pick the ALE/IDOC route ???
Do you know any BADI / Enhancement points where we can implement this ???

How can I get the Microsoft enhanced Point and Print compatibility driver installed on Win7 LC master?

We recently migrated from a Windows Server 2003 to Windows Server 2012 print server. When recomposing a linked clone pool with the old 2003 server, drivers were taken care of for the printer when the user printed for the first time after desktop recompose. With 2012, any printer using the Point and Print driver doesn't seem to obtain the driver again from the 2012 server. All of our clients are running Windows 7 which means the Microsoft enhanced Point and Print compatibility driver is not installed in the OS natively.
I apparently need to figure out a way to get this installed on the host image so it trickles down to snapshots when recomposing the linked clone pool but I haven't been able to dig much information on doing this. Does anyone out there have any insight on how to accomplish this? If I recompose a pool now for a user who is using a new Point and Print driver, they get the following message that is resolved by removing the printer from their account and re-adding it:
"The 'Microsoft enhanced Point and Print compatibility driver' printer driver is not installed on this computer. Some printer properties will not be accessible unless you install the printer driver. Do you want to install the driver now?"
I figured the easy solution would be to just install a printer using the Point and Print driver and then remove it...leaving the driver behind (unless it cleaned up after itself). The problem with this is in my testing, even after removing and re-adding a printer that set off installation of this Point and Print driver on the client, any other printer that was using it still required the remove/re-add process in order to work, else I got the same message. That tells me that the driver may be custom for each printer installed?
Color me a little confused. I do NOT like the way that Server 2012 handles printers. I've come across a few other issues as well (such as duplex capabilities not being remember on the print server for a printer) that I never had with the 2003 server.
Thanks!!

I was able to get it to work using your instructions off of here and your other thread
Thank you!
Chris
http://social.technet.microsoft.com/Forums/en-US/864553c2-c8ff-49d2-bd48-eb7b47381111/windows-2012-print-server-problem-with-xp-clients?prof=required

Data not loading in Development system( Urgent)

Dear SDNs,
Am loading data in development system... The message in status tab is Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
I tried to reload the data but am getting the same kind of error message...
I checked out whether the source system connection is OK or not... While am checking the source system connection I got an error message like as follows
BW unknown in source system
The BW IDoc type ZSIA035 is not the same as the source system IDoc type
The following errors occurred in the source system:
EDI: Partner profile not available
Entry in inbound table not found
Entry in outbound table not found
Entry in outbound table not found
Wat kind of action does we follow in this situation...
Kindly Advice me...
Answering getz appreciated...
Warm Regards,
Aluri

Hi Aluri,
I do faced the same problem before....
Is RFC connections and Partner Profiles are done properly between BW system and R/3 systems.........
If it has done properly....... Try to Activate the R/3 source system at BW side...
Still if you are getting the same error..
Right click on R/3 Source system at BW -> select Resore....
It will ask you RFCUSER passward for BW adn R/3
After doing it also still if you get the errors ...
Try to configure the all these steps....
Step 1: Create a Logical System at BW and R/3 side using t-code SALE
Step 2: Create the RFC Connection between BW to R/3 and R/3 to BW using the SM59 and Do the Test Connection and Remote login
Step 3: Create the Port Number for IDOC processing at R/3 and BW sides using WE21
Step4 : Create the Partner Profiles at R/3 and BW sides using the WE20
Specify the Inbound and Outbound parameters at R/3 and BW
For to know message types follow the link.....
http://wiki.ittoolbox.com/index.php/HOWTO:Re-Connect_R/3_and_BW
Check this Link also...
http://help.sap.com/saphelp_nw04/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/content.htm
After doing all these things now come to BW
Create R/3 Source System at AWB....
Hope it Helps...
Regards,
Kiran Telkar
* Assign points if it helps your requirement * *

Shipping point was not determine in the order with material determination.

Hi,
I´m using material determination for my sales order, and i need to determine the Shipping point with storage location configuration. So when I add the material number, the quantity and the storage location the material determination runs and in the second line determined the shipping point it is not filled. Any body knows how can I fix this problem?
Best Regards

Hi
The shipping point will be determined on the basis of shipping condition, loading group and the delivering plant.
The storage location dependent shipping point determination is used only in delivery documents and not in sales orders (Assign Shipping Points According to Storage Location).
To activate this you must first Define Rule for Determination of Shipping Point, wherein you can assign the rule to the delivery document only and not to the sales order.
If you say that you are getting the shipping point determined based on the number of the material, the quantity and the storage location entered(though it is not) then here note that you are entering the storage location only to the material entered and not to the material determined. When the system determine the alternate material then the shipping point will be determined on the basis of shipping condition, loading group and the delivering plant as per SAP standard process.
Try by entering the storage location to the material determined and check whether you can get the shipping point or not and let the forum know the result.
Hope this helps you.
Regards
Rajkumar K

User Exit/BADI/Enhancement Point in VF01 before new document no assignment

Hi Expert,
I am looking for a user exit/BADI/Enhancement point which will trigger in VF01 before the new document no (Billing document no assign).
I need to cross check few things in Billing via VF01 at billing document save and give error message accordingly. The problem is if new number assign and there is error due to my code then when user save the document next he get a new no. its mean a no skip.
Example: The invoice no is 1000. User start creating a billing document with Vf01 and he get an error message due to my code at exit , at this point of time the next number assign to billing which is 1001 but document not save due to my error message. Now after applying correction user save data and billing document created with no 1002. So there is no skip.
I tried BADI BADI_SD_ACCOUNTING but this will trigger after no assignment. Can someone provide me a user exit/BADI/Enhancement point in VF01 which trigger before no range assignment and contain at least Billing header data to use in my code?
Regards
Swati
Edited by: Swati Namdev on Nov 16, 2010 9:55 PM

HI Brad and team,
BRED is right. I check few user exit normally all of us have that list or easily available on net.
BRED: my question is: I need to check the billing date VBRK-FKDAT of document should not be less than the sales order plan billing date VBAP-Oldate.
If this check fail then won't allow the user to create billing document. The problem is I used one user exit SDVFX001 already define previously that's work fine but issue is that user exit trigger after the billing no assignment. That's why when user get that error message he correct the document and create billing this time he get a new number which is skip of one no.
That why I need a User Exit/BADI/Enhancement Point which trigger at save but before document no assignment.
Please update more about your comment "Why not use a header level copy requirement routine to perform the checks and log the messages? This is the standard process." .
Suggest user exit USEREXIT_FILL_VBRK_VBRP trigger before save. I need at save the reason is VBRK-FKDAT this can be change.
Feel free to contact me back if you need more clarification.
Regards
Swati
Edited by: Swati Namdev on Nov 17, 2010 6:22 PM
Edited by: Swati Namdev on Nov 17, 2010 6:25 PM
Edited by: Swati Namdev on Nov 17, 2010 6:32 PM
Edited by: Swati Namdev on Nov 17, 2010 6:47 PM

Enhancement point is not processed in Q-System

Similar Messages

Maybe you are looking for