PSD Asset not processing into system?

Hi,
I'm working with Extract for the first time today. With the first, small and straight-forward file the system worked beautifully. However, with subsequent attempts to work with larger and more complex PSDs, not only does it seem that they are not processing into the system (no thumbnails in Assets view), but when I try to view the file in the Extract view, the system attempts to process them and then fails at 34% each time.
I have confirmed that there are fewer than 1000 layers in these files (up to 833). However, there are commas in the layer names, which is triggering issues in the Extract Assets process within PS itself.
Could you help me troubleshoot what's going on here?
Thanks in advance.

Sure... we're always interested in files that don't process because our target there is zero :-)
Since I don't have access to these failing files you would need to explicitly share them with us for investigation. If it's something that you can share, you can do so by choosing "Send link" from the dropdown and then choosing "Create public link." That will create an (unlisted) link that you can then share via PM or even here in the forum if you choose.
Thanks,
-Mitch

Similar Messages

[SOLVED] GRUB2 does not process hooks: System doesn't boot

My initial system was an SSD where /dev/sda1 was my boot partition and /dev/sda2 was an (encrypted) LVM containing home, root, var and swap. Since all partitions were ext3, I decided to do a clean format to ext4 and copy my data back on the partitions. First I archived everything but home with the arch live CD onto a server with:
rsync -a /mnt/* root@server:/path/to/backupdir/
Everything went fine, but after copying back, the system would not boot (it was GRUB Legacy). Since it was not in the MBR but on sda1, I figured I could upgrade to GRUB2 now. So I followed the described procedure (from a live CD) and installed GRUB2 (this time into the MBR of sda. I then regenerated the image via mkinitcpio -p linux and generated a configuration file.
When I try to start the system, GRUB2 gets loaded, but after the two messages for loading the ramdisk it remains silent for some time (no output at all) until it finally complains it cannot find my root. But I did not see any output of any hook being processed (including encrypt) so of course it cannot find my root, since it is still encrypted.
I reformatted my boot partition again and reinstalled and regenerated everything again (I copied the directory contents from my backup but moved the old grub folder). Still the same issue. I know I could probably just reinstall everything and restore the settings, but I'd really prefer to restore my system, since this should be a lot faster.
Here are the relevant configuration files:
rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# LANG in /etc/locale.conf takes precedence
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Berlin"
KEYMAP="de-latin1-nodeadkeys"
#CONSOLEFONT=
#CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MODULES=(acpi-cpufreq cpufreq_ondemand tun fuse vboxdrv)
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="yes"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="archlaptop"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=wlan0
address=
netmask=
broadcast=
gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
NETWORKS=(FlosAP)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If you are sure nothing else touches your hardware clock (such as ntpd or
# a dual-boot), you might want to enable 'hwclock'. Note that this will only
# make a difference if the hwclock program has been calibrated correctly.
# If you use a network filesystem you should enable 'netfs'.
DAEMONS=(syslog-ng dbus acpid crond alsa networkmanager @bumblebeed laptop-mode !hwclock ntpd psd)
mkinitcpio.conf
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run first, so it may be used to
# override the actual binaries used in a given hook.
# (Existing files are NOT overwritten if already added)
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options
# like so:
# FILES="/etc/modprobe.d/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect pata scsi sata filesystems"
## This is identical to the above, except the old ide subsystem is
## used for IDE devices instead of the new pata subsystem.
# HOOKS="base udev autodetect ide scsi sata filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev pata scsi sata usb filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev pata mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev usb lvm2 filesystems"
HOOKS="base udev autodetect pata scsi sata keymap encrypt lvm2 resume filesystems usbinput"
# COMPRESSION
# Use this to compress the initramfs image. With kernels earlier than
# 2.6.30, only gzip is supported, which is also the default. Newer kernels
# support gzip, bzip2 and lzma. Kernels 2.6.38 and later support xz
# compression.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
grub.cfg
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if loadfont unicode ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch GNU/Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-194e65d3-b357-430d-b4bb-67a8300d287d' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 b69dee88-a8c9-4af7-a938-7ca6c8ff368c
else
search --no-floppy --fs-uuid --set=root b69dee88-a8c9-4af7-a938-7ca6c8ff368c
fi
echo 'Loading Linux core repo kernel ...'
linux /vmlinuz-linux root=/dev/mapper/VolGroup00-root ro quiet
echo 'Loading initial ramdisk ...'
initrd /initramfs-linux.img
menuentry 'Arch GNU/Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-194e65d3-b357-430d-b4bb-67a8300d287d' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 b69dee88-a8c9-4af7-a938-7ca6c8ff368c
else
search --no-floppy --fs-uuid --set=root b69dee88-a8c9-4af7-a938-7ca6c8ff368c
fi
echo 'Loading Linux core repo kernel ...'
linux /vmlinuz-linux root=/dev/mapper/VolGroup00-root ro quiet
echo 'Loading initial ramdisk ...'
initrd /initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
Thank you in advance. If you need any more information, please let me know.
Regards,
javex
Last edited by javex (2012-08-10 18:33:41)

Thank you for your reply. I looked further into the grub.cfg and removed the quiet part. Apparently the problem is that it runs all hooks but does not prompt me for a passphrase when running the encrypt hook. Why does this occur?
Edit: I solved this: apparently I forgot to specify a cryptdevice. Since the article about dm-crypt does not talk about GRUB2, I missed that. I will rework that section to specify GRUB2 and GRUB-Legacy
Last edited by javex (2012-08-10 18:33:22)

Referenced files not moved into system trash when emptying Aperture trash

I check the checkbox for "Move referenced files to system trash", but instead of moving them Aperture deletes them immediately.
Anyone else having this? My referenced files are on an external drive.

You might have permissions problems with the trash on the external drive. If you delete a file on the external but outside of Aperture does it work OK?
OS X will immediately delete files if the trash file is not accessible for some reason.

Planned orders are not taking into account the processing time

Hi,
Could you please tell me why planned orders quantities are not based on processing time from the material master.
Materials was set before with 1 day in house production , no matter of lot size.
Based on routings I updated material master with processing time depending on lot size.
What is bottering me now is that planned orders are not taking into account processing time. (e.g. based on my processing time 1000 pce are produced in 3 days, but planned orders show me that 1000 pce are still need in 1 day , but it can not be produced in 1 day ).
what did I miss?
Thanks a lot for any information!

Hello Simona
The in house production time from tab MRP 2 is lot size independent.
However, on tab work scheduling you can define a lot size dependent times.
Please observe that, if you have entered an in house production time, the processing time will not be considered. The F1 help of the field provides the following explanation:
You can define work scheduling times in the material master record in one of two ways:
Either you enter the in-house production time. If required, you can get the system to update this value from the routing.
Or you enter the setup, teardown, processing, and interoperation times. If you maintain these values, the system determines the in-house production time on the basis of lot size.
Therefore, if you want to consider the processing time, you should remove the in house processing time.
BR
Caetano

File to RFC problem- data is not inserting into ztable in R3 system

Hi
i have done File to RFC scenario which picks data from flat file and inserts into ztable via RFC in R3. but while testing my scenario everything is successful in XI monitoring (Successful flag in MONI and RWB) and in auditlog message status is DLVD.
it seems to be everything successful in XI and RFC call also successful in R3 system.
but for some reason data is not inserting into table (RFC is used to insert data into ztable)
Is there any way to debug RFC call excecution in XI..?
RFC code is like this:
insert ZMM_AUTO_GR from INPUT_TABLE.
commit work.
END FUNCTION.
please advice what could be the reason not inserting into table.
Help would be appreciated.
Regards,
Rajesh

Hi Praveen,
please see audit log- from communication channel monitoring..
Receiver channel 'CC_INCA_RFC_SAPECC_Receiver' for party '', service 'R3DCLNT210' (internal name 'RfcClient[CC_INCA_RFC_SAPECC_Receiver]')
Client data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=210, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=jsaha, jco.client.sysnr=00, jco.client.ashost=ausr3devdc02}
Repository data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=210, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=jsaha, jco.client.sysnr=00, jco.client.ashost=ausr3devdc02}
Current pool size: 1, maximum pool size : 1
Channel History
- OK: 2008-07-28 04:32:04 PDT: Message processed for interface ZAUTO_GR_STAGE_INCA
- OK: 2008-07-28 04:31:04 PDT: Message processed for interface ZAUTO_GR_STAGE_INCA
- OK: 2008-07-28 03:56:56 PDT: Message processed for interface ZAUTO_GR_STAGE_INCA
- OK: 2008-07-28 03:49:04 PDT: Message processed for interface ZAUTO_GR_STAGE_INCA
- OK: 2008-07-28 03:48:04 PDT: Message processed for interface ZAUTO_GR_STAGE_INCA

I have osx 10.6.8 and have lost the side scroll bars on Safari. When I go into System Preferences there is NOT an "always" option for displaying Scroll Bar. How do I get it them to display again?

When using Safari the scroll bars no longer appear on the right hand side. When I go into System Preferences the option to Always have the scroll bars displayed is NOT there. How/Where do I go to get these to show all the time?

It SHOULD be under the General tab in System Preferences:
(Note that this is a Mavericks screenshot, but it should be there in Snow Leopard, too, if indeed you're still running 10.6.8 as your profile says)
Clinton

ERROR:Could not read archive file - during Processing Base System Part 2

Hi there,
What I have:
* I have problem with installation of the Mac OS X Panther v10.3 on iMac.
* I have 3 original CDs (black with silver X).
What I did:
* I made new 1 partition and formated disk as Mac OS Extended (Journaled) over the Disk Utility in the first CD as normal without additional options (if I tried to format disk with zero all data and 8 way random write format after 3 days computer freeze)
* I verified disk over this utility - that was ok - HFS volume verifed.
* Then I restarted the computer and ran installation from this first CD
What happened:
* installation did not finish, because there were some problems during installation process.
* i tried to customize installation just for essential work (without other languages support, printers etc), but it was still the same problem
Installation log:
After I choosed installation type, there was first error, but it did not look like important.. - root: bootstraplookup(): unknown error code
Checking your installation disk - OK
Preparing disk - OK
Preparing base 1 and 2 - OK
Other preparing.. - OK
Processing Base System Part 1 - OK
Processing Base System Part 2
==
ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
last message repeated 2 times
ERROR:Could not write file. - pax: WARNING! These patterns were not matched:
Some files for Essentials may not have been writen correctly.
root: Installer[108] Exception raised during posting of notification. Ignored. exception: Some files for Essentials may not have been written correctly. (code 1)
Install Failed
Error detected
Name: NSGenericException
Reason: Some files for Essentials may not nave been written correctly. (code 1)
==
It seems like a problem with reading some data from the CD, but during the installation checking of disk was ok.. maybe it can be problem with the cd-rom..? Or problem with data on cd-rom - I mean bad archive file..? But it is original CD.. What do you think??
Thank you!

Tomas,
On THIS Page, locate your iMac model.
From the Documents column, click on the appropriate number link.
Using the info in the document that opens, locate the serial number of your iMac.
On THIS Page, in the text field for Search Tech Specs, enter that serial number.
Click on the model of iMac that appears.
Post a link to the page that opens, or post the info requested below.
Exactly which model iMac is it?
What is the Processor speed?
What size is the Hard Drive?
How much Memory is installed?
What type of internal Optical Drive does it have?
Which version of OS, was the original Installed Software?
ali b

PO error in Process-Order Unit PU not convertible into unit lot of req

Hi ALL,
SRM 5.0 SP13 ECS
Service based req with order unit LOT was pushed to SRM . SC got approved in SRM with order unit LOT, PO got approved with order unit LOT and now the PO is in error in process state. I looked up RZ20 to find the message "Order unit PU not covertible into unit Lot of req. We are using material groups and not material masters.
Any idea what is causing this error? order unit seems to be the same, right though the scenario, It was never tried to change at any point of time in the cycle
Krishna

krishna
update here your findings.it helps others too when they are in trouble.
Muthu

HT4759 Hello .. I've been subscribed for ic;oud for 20$ per year and I found it useless for many reasons: that I can not disconnect my mobile while the uploading process and it takes long time for uploading my data .. Its not a reliable system that's why

Hello .. I've been subscribed for ic;oud for 20$ per year and I found it useless for many reasons: that I can not disconnect my mobile while the uploading process and it takes long time for uploading my data .. Its not a reliable system that's why I need to deactivate the space service and take my money back .. Thanks

The "issues" you've raised are nothing to do with the iCloud service.
No service that uploads data allows you to disconnect the device you are uploading from while uploading data. Doing so would prevent the upload from completing. It is a basic requirement for any uploading service that you remain connected to it for uploading to be possible.
The time it takes to upload data to iCloud is entirely dependent on how fast your Internet connection is, and how much data you are uploading. Both of these things are completely out of Apple's control. Whichever upload service you use will be affected by the speed of your Internet connection.

I can not login into the system.

Hello! A problem - I can not login into the system. After entering the login and password for a second or two there is a blue screen, then the universe, then again a blue screen, and - again, the login window. This happens with just one account of the four on my iMac-2007 with OS 10.6.8. How can I be?

Click here and follow the instructions.
(36381)

The State System message file processing could not process

Hi
We have Windows server 2008R2 SCCM 2012 R2 CU3 SQL 2008 R2.
Every 15-19 minutes I got two errors in State messages ID6104 (The State System message file processing could not process file 'HI6DYYB8.SMX' and moved it to the corrupt directory. Review the statesys.log file for further details.), 6105 (The State System
message file processing processed one or more files that contained errors or invalid data. Review the statesys.log file for further details.). It started on Monday.
Also on server in statesys.log
SQL MESSAGE: spProcessStateReport - Record 1 failed processing with error -50010:
SMS_STATE_SYSTEM 26.02.2015 07:11:30
9880 (0x2698)
CMessageProcessor - Non-fatal error while processing HI6DYYB8.SMX
SMS_STATE_SYSTEM 26.02.2015 07:11:30
9880 (0x2698)
STATMSG: ID=6104 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_STATE_SYSTEM" SYS=server.fqdn SITE=MYSITE PID=3744 TID=9880 GMTDATE=ce feb 26 05:11:30.119 2015 ISTR0="HI6DYYB8.SMX" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_STATE_SYSTEM 26.02.2015 07:11:30
9880 (0x2698)
Thread "State Message Processing Thread #0" id:9880 was unable to process file "D:\SCCM_prog\inboxes\auth\statesys.box\process\HI6DYYB8.SMX", moving to corrupt directory.
SMS_STATE_SYSTEM 26.02.2015 07:11:30
9880 (0x2698)
total chucks loaded (0) SMS_STATE_SYSTEM
26.02.2015 07:11:30 9880 (0x2698)
What could cause this messages to appear?

That just indicates that a state message sent by a client was somehow corrupted. You can examine the .smx that was moved to the corrupt-box, but it's not unusual that it happens.
Torsten Meringer | http://www.mssccmfaq.de

I am on a i mac osx 10.8.4 and can not get into i photo i keep recieving the message "The library could not be opened because the file system of the library's volume is unsupported.

I am on a i mac osx 10.8.4 and can not get into i photo i keep recieving the message "The library could not be opened because the file system of the library's volume is unsupported."

Where is the Library? It needs to be on a disk formatted Mac OS Extended (Journaled)

"Uh oh, this PSD was not successfully processed because it's not currently compatible with Extract."

I'm currently getting this error: "Uh oh, this PSD was not successfully processed because it's not currently compatible with Extract." What would cause a PSD to not be compatible with Extract?

[Sorry, Ostry, for the long delay. This one slipped through the cracks and I only recently rediscovered it]
There is no particular size limit on files; we do have a layer limit but if you were hitting that it would have explicitly told you so.
If you are still having trouble, and you have files that you can share privately with me, I'll be happy to take a look [we take your privacy very seriously and our lawyers won't let us just go snooping in your files :-) so you have to explicitly share them with us]

HT1212 where do i go to get started with the disabled phone process. I selected the information regarding not syncing into itunes ever. but where do I go on the site to get started

where do i go to get started with the disabled phone process. I selected the information regarding not syncing into itunes ever. but where do I go on the site to get started

You use iTunes and restore the phone from Recovery Mode. You will lose all content. http://support.apple.com/kb/HT1808

An Error Occurred While Processing Your Request We're sorry. While processing your request, we encountered a system-related error. Your request was not processed. Error ID Code: b7bc5afa-ce52-434b-bfb6-3fb086b77a23

Every time i log out of my Bank email after getting a copy of transactions, I get the following:
An Error Occurred While Processing Your Request
We're sorry. While processing your request, we encountered a system-related error.
Your request was not processed.
Error ID Code: b7bc5afa-ce52-434b-bfb6-3fb086b77a23
If the error continues or you need to contact support, please provide them with the Error ID Code above.
That's what I am doing. contacting support.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"

PSD Asset not processing into system?

Similar Messages

Maybe you are looking for